summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-01-30Merge tag 'sunxi-fixes-for-6.2-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes - Fix error handling in RSB init * tag 'sunxi-fixes-for-6.2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: bus: sunxi-rsb: Fix error handling in sunxi_rsb_init() Link: https://lore.kernel.org/r/Y9RWcDdO0nj98KVj@jernej-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-30ACPI: PMIC: Add comments with DSDT power opregion field namesHans de Goede
The DSDTs of CHT devices using the Dollar Cove TI PMIC, all use LDO1 - LDO14 names for the DSDT power opregion field names. Add comments with these fields to make it easier to see which PMIC registers are being set by ACPI code using these. Note that LDO4 is missing and the mapped registers jump from 0x43 to 0x45 to match. This matches with how the fields are declared in the DSDT where LDO4 is skipped too. Note there is no hole in the field addresses, LDO4 is simply just not defined on either side. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-30ACPI: battery: Increase maximum string lengthArmin Wolf
On the Dell Inspiron 3505, the battery model name is represented as a hex string containing seven numbers, causing it to be larger than the current maximum string length (32). Increase this length to 64 to avoid truncating the string in such cases. Also introduce a common define for the length. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-30ACPI: battery: Fix buffer overread if not NUL-terminatedArmin Wolf
If a buffer containing ASCII characters is not NUL-terminated (which is perfectly legal according to the ACPI specification), the ACPI battery driver might not honor its length. Fix this by limiting the amount of data to be copied to the buffer length while also using strscpy() to make sure that the resulting string is always NUL-terminated. Also replace strncpy() vs strscpy(). Signed-off-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-30ACPI: APEI: EINJ: Limit error type to 32-bit widthShuai Xue
The bit map of error types to inject is 32-bit width [1]. Add parameter check to reflect the fact. [1] ACPI Specification 6.4, Section 18.6.4. Error Types Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-30watchdog: diag288_wdt: fix __diag288() inline assemblyAlexander Egorenkov
The DIAG 288 statement consumes an EBCDIC string the address of which is passed in a register. Use a "memory" clobber to tell the compiler that memory is accessed within the inline assembly. Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-30watchdog: diag288_wdt: do not use stack buffers for hardware dataAlexander Egorenkov
With CONFIG_VMAP_STACK=y the stack is allocated from the vmalloc space. Data passed to a hardware or a hypervisor interface that requires V=R can no longer be allocated on the stack. Use kmalloc() to get memory for a diag288 command. Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-30platform/x86: thinkpad_acpi: Fix thinklight LED brightness returning 255Hans de Goede
Reading the thinklight LED brightnes while the LED is on returns 255 (LED_FULL) but we advertise a max_brightness of 1, so this should be 1 (LED_ON). Fixes: db5e2a4ca0a7 ("platform/x86: thinkpad_acpi: Fix max_brightness of thinklight") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230127235723.412864-1-hdegoede@redhat.com
2023-01-30platform/x86/amd: pmc: add CONFIG_SERIO dependencyArnd Bergmann
Using the serio subsystem now requires the code to be reachable: x86_64-linux-ld: drivers/platform/x86/amd/pmc.o: in function `amd_pmc_suspend_handler': pmc.c:(.text+0x86c): undefined reference to `serio_bus' Add the usual dependency: as other users of serio use 'select' rather than 'depends on', use the same here. Fixes: 8e60615e8932 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230127093950.2368575-1-arnd@kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-30platform/x86/amd/pmf: Ensure mutexes are initialized before useHans de Goede
As soon as the first handler or sysfs file is registered the mutex may get used. Move the initialization to before any handler registration / sysfs file creation. Likewise move the destruction of the mutex to after all the de-initialization is done. Fixes: da5ce22df5fe ("platform/x86/amd/pmf: Add support for PMF core layer") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230130132554.696025-1-hdegoede@redhat.com
2023-01-30platform/x86/amd/pmf: Fix to update SPS thermals when power supply changeShyam Sundar S K
Every power mode of static power slider has its own AC and DC power settings. When the power source changes from AC to DC, corresponding DC thermals were not updated from PMF config store and this leads the system to always run on AC power settings. Fix it by registering with power_supply notifier and apply DC settings upon getting notified by the power_supply handler. Fixes: da5ce22df5fe ("platform/x86/amd/pmf: Add support for PMF core layer") Suggested-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230125095936.3292883-6-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-30platform/x86/amd/pmf: Fix to update SPS default pprof thermalsShyam Sundar S K
By design PMF static slider will be set to BALANCED during init, but updating to corresponding thermal values from the PMF config store was missed, leading to improper settings getting propagated to PMFW. Fixes: 4c71ae414474 ("platform/x86/amd/pmf: Add support SPS PMF feature") Suggested-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230125095936.3292883-5-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-30platform/x86/amd/pmf: update to auto-mode limits only after AMT eventShyam Sundar S K
Auto-mode thermal limits should be updated only after receiving the AMT event. But due to a bug in the older commit, these settings were getting applied during the auto-mode init. Fix this by removing amd_pmf_set_automode() during auto-mode initialization. Fixes: 3f5571d99524 ("platform/x86/amd/pmf: Add support for Auto mode feature") Suggested-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230125095936.3292883-4-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-30platform/x86/amd/pmf: Add helper routine to check pprof is balancedShyam Sundar S K
Add helper routine to check if the current platform profile is balanced mode and remove duplicate code occurrences. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230125095936.3292883-3-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-30platform/x86/amd/pmf: Add helper routine to update SPS thermalsShyam Sundar S K
Add helper routine to update the static slider information and remove the duplicate code occurrences after this change. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230125095936.3292883-2-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-30Merge branch 'thermal-intel'Rafael J. Wysocki
Merge changes affecting thermal control on Intel platforms for 6.3-rc1: - Consolidate code accessing the Intel TCC (Thermal Control Circuitry) MSRs by introducing library functions for that and making the TCC-related code in thermal drivers use them (Zhang Rui). - Enhance the x86_pkg_temp_thermal driver to support dynamic tjmax changes (Zhang Rui). - Address an "unsigned expression compared with zero" warning in the intel_soc_dts_iosf thermal driver (Yang Li). - Update comments regarding two functions in the Intel Menlow thermal driver (Deming Wang). - Use sysfs_emit_at() instead of scnprintf() in the int340x thermal driver (ye xingchen). - Make the intel_pch thermal driver support the Wellsburg PCH (Tim Zimmermann). - Add trip point initialization helper functions for ACPI-defined trip points and modify two thermal drivers to use them (Rafael Wysocki, Daniel Lezcano). - Modify the intel_pch and processor_thermal_device_pci thermal drivers use generic trip point tables instead of thermal zone trip point callbacks (Daniel Lezcano). - Add production mode attribute sysfs attribute to the int340x thermal driver (Srinivas Pandruvada). - Rework dynamic trip point updates handling and locking in the int340x thermal driver (Rafael Wysocki). - Make the int340x thermal driver use a generic trip points table instead of thermal zone trip point callbacks (Rafael Wysocki, Daniel Lezcano). * thermal-intel: thermal: intel: int340x: Use generic trip points table thermal: intel: int340x: Use zone lock for synchronization thermal: intel: int340x: Rework updating trip points thermal: ACPI: Initialize trips if temperature is out of range thermal: intel: processor_thermal_device_pci: Use generic trip point thermal: intel: int340x: Add production mode attribute thermal: intel: intel_pch: Use generic trip points thermal: ACPI: Add ACPI trip point routines thermal: intel: intel_pch: Add support for Wellsburg PCH thermal: int340x_thermal: Use sysfs_emit_at() instead of scnprintf() thermal: intel: menlow: Update function descriptions thermal: intel: Fix unsigned comparison with less than zero thermal/x86_pkg_temp_thermal: Add support for handling dynamic tjmax thermal/x86_pkg_temp_thermal: Use Intel TCC library thermal/intel/intel_tcc_cooling: Use Intel TCC library thermal/intel/intel_soc_dts_iosf: Use Intel TCC library thermal/int340x/processor_thermal: Use Intel TCC library thermal/intel: Introduce Intel TCC library
2023-01-30RDMA/usnic: use iommu_map_atomic() under spin_lock()Yang Yingliang
usnic_uiom_map_sorted_intervals() is called under spin_lock(), iommu_map() might sleep, use iommu_map_atomic() to avoid potential sleep in atomic context. Fixes: e3cf00d0a87f ("IB/usnic: Add Cisco VIC low-level hardware driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230129093757.637354-1-yangyingliang@huawei.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-01-30net: phy: fix null dereference in phy_attach_directColin Foster
Commit bc66fa87d4fd ("net: phy: Add link between phy dev and mac dev") introduced a link between net devices and phy devices. It fails to check whether dev is NULL, leading to a NULL dereference error. Fixes: bc66fa87d4fd ("net: phy: Add link between phy dev and mac dev") Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-30net: stmmac: do not stop RX_CLK in Rx LPI state for qcs404 SoCAndrey Konovalov
Currently in phy_init_eee() the driver unconditionally configures the PHY to stop RX_CLK after entering Rx LPI state. This causes an LPI interrupt storm on my qcs404-base board. Change the PHY initialization so that for "qcom,qcs404-ethqos" compatible device RX_CLK continues to run even in Rx LPI state. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-29s390/dcssblk:: don't call bio_split_to_limitsChristoph Hellwig
s390 iterates over the bio using bio_for_each_segment and doesn't need any bio splitting. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Link: https://lore.kernel.org/r/20230123075356.60847-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29ps3vram: remove bio splittingChristoph Hellwig
ps3vram iterates over the bio one segment, that is page aligned and max page sized chunk, a time. Because of that there is no point in calling bio_split_to_limits, or explicitly setting the default limits that are only used by bio_split_to_limits. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Geoff Levand <geoff@infradead.org> Link: https://lore.kernel.org/r/20230123074718.57951-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29block: introduce bdev_zone_no helperPankaj Raghav
Add a generic bdev_zone_no() helper to calculate zone number for a given sector in a block device. This helper internally uses disk_zone_no() to find the zone number. Use the helper bdev_zone_no() to calculate nr of zones. This lets us make modifications to the math if needed in one place. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Pankaj Raghav <p.raghav@samsung.com> Link: https://lore.kernel.org/r/20230110143635.77300-4-p.raghav@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29nvme: set REQ_ALLOC_CACHE for uring-passthru requestAnuj Gupta
This patch sets REQ_ALLOC_CACHE flag for uring-passthru requests. This is a prep-patch so that normal / IRQ-driven uring-passthru I/Os can also leverage bio-cache. Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> Signed-off-by: Kanchan Joshi <joshi.k@samsung.com> Link: https://lore.kernel.org/r/20230117120638.72254-2-anuj20.g@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29ublk_drv: add mechanism for supporting unprivileged ublk deviceMing Lei
unprivileged ublk device is helpful for container use case, such as: ublk device created in one unprivileged container can be controlled and accessed by this container only. Implement this feature by adding flag of UBLK_F_UNPRIVILEGED_DEV, and if this flag isn't set, any control command has been run from privileged user. Otherwise, any control command can be sent from any unprivileged user, but the user has to be permitted to access the ublk char device to be controlled. In case of UBLK_F_UNPRIVILEGED_DEV: 1) for command UBLK_CMD_ADD_DEV, it is always allowed, and user needs to provide owner's uid/gid in this command, so that udev can set correct ownership for the created ublk device, since the device owner uid/gid can be queried via command of UBLK_CMD_GET_DEV_INFO. 2) for other control commands, they can only be run successfully if the current user is allowed to access the specified ublk char device, for running the permission check, path of the ublk char device has to be provided by these commands. Also add one control of command UBLK_CMD_GET_DEV_INFO2 which always include the char dev path in payload since userspace may not have knowledge if this device is created in unprivileged mode. For applying this mechanism, system administrator needs to take the following policies: 1) chmod 0666 /dev/ublk-control 2) change ownership of ublkcN & ublkbN - chown owner_uid:owner_gid /dev/ublkcN - chown owner_uid:owner_gid /dev/ublkbN Both can be done via one simple udev rule. Userspace: https://github.com/ming1/ubdsrv/tree/unprivileged-ublk 'ublk add -t $TYPE --un_privileged=1' is for creating one un-privileged ublk device if the user is un-privileged. Link: https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29ublk_drv: add module parameter of ublks_max for limiting max allowed ublk devMing Lei
Prepare for supporting unprivileged ublk device by limiting max number ublk devices added. Otherwise too many ublk devices could be added by un-trusted user, which can be thought as one DoS. Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-6-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29ublk_drv: add device parameter UBLK_PARAM_TYPE_DEVTMing Lei
Userspace side only knows device ID, but the associated path of ublkc* and ublkb* could be changed by udev, and that depends on userspace's policy, so add parameter of UBLK_PARAM_TYPE_DEVT for retrieving major/minor of the ublkc* and ublkb*, then user may figure out major/minor of the ublk disks he/she owns. With major/minor, it is easy to find the device node path. Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-5-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29ublk_drv: move ublk_get_device_from_id into ublk_ctrl_uring_cmdMing Lei
It is annoying for each control command handler to get/put ublk device and deal with failure. Control command handler is simplified a lot by moving ublk_get_device_from_id into ublk_ctrl_uring_cmd(). Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-4-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29ublk_drv: don't probe partitions if the ubq daemon isn't trustedMing Lei
If any ubq daemon is unprivileged, the ublk char device is allowed for unprivileged user actually, and we can't trust the current user, so not probe partitions. Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver") Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29ublk_drv: remove nr_aborted_queues from ublk_deviceMing Lei
No one uses 'nr_aborted_queues' any more, so remove it. Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230106041711.914434-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29drbd: drbd_insert_interval(): Clarify commentAndreas Gruenbacher
Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20230113123538.144276-9-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29drbd: interval tree: make removing an "empty" interval a no-opLars Ellenberg
Trying to remove an "empty" (just initialized, or "cleared") interval from the tree, this results in an endless loop. As we typically protect the tree with a spinlock_irq, the result is a hung system. Be nice to error cleanup code paths, ignore removal of empty intervals. Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20230113123538.144276-8-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29drbd: remove macros using require_contextChristoph Böhmwalder
This require_context attribute originated in a proposed sparse patch by Philipp Reisner back in 2008. Johannes Berg had a different solution to a similar problem, and that patch "won" in the end; so the require_context thing never got merged. The whole history can be read at [0]. DRBD kept using these annotations anyway for a while. Nowadays, on a modern unmodified sparse, they obviously do nothing, and they are hardly used anymore anyway. So, just remove the definitions of these macros. [0] https://www.spinics.net/lists/linux-sparse/msg01150.html Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Reviewed-by: Joel Colledge <joel.colledge@linbit.com> Link: https://lore.kernel.org/r/20230113123538.144276-6-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29drbd: remove unnecessary assignment in vli_encode_bitsChristoph Böhmwalder
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Reviewed-by: Joel Colledge <joel.colledge@linbit.com> Link: https://lore.kernel.org/r/20230113123538.144276-5-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29drbd: split off drbd_config into separate fileChristoph Böhmwalder
To be more similar to what we do in the out-of-tree module and ease the upstreaming process. Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Reviewed-by: Joel Colledge <joel.colledge@linbit.com> Link: https://lore.kernel.org/r/20230113123506.144082-4-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29drbd: drop API_VERSION defineChristoph Böhmwalder
Use the genetlink api version as defined in drbd_genl_api.h. Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Reviewed-by: Joel Colledge <joel.colledge@linbit.com> Link: https://lore.kernel.org/r/20230113123506.144082-3-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29drbd: split off drbd_buildtag into separate fileChristoph Böhmwalder
To be more similar to what we do in the out-of-tree module and ease the upstreaming process. Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Reviewed-by: Joel Colledge <joel.colledge@linbit.com> Link: https://lore.kernel.org/r/20230113123506.144082-2-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29block: make BLK_DEF_MAX_SECTORS unsignedKeith Busch
This is used as an unsigned value, so define it that way to avoid having to cast it. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20230105205146.3610282-2-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-29Merge tag 'x86_urgent_for_v6.2_rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Start checking for -mindirect-branch-cs-prefix clang support too now that LLVM 16 will support it - Fix a NULL ptr deref when suspending with Xen PV - Have a SEV-SNP guest check explicitly for features enabled by the hypervisor and fail gracefully if some are unsupported by the guest instead of failing in a non-obvious and hard-to-debug way - Fix a MSI descriptor leakage under Xen - Mark Xen's MSI domain as supporting MSI-X - Prevent legacy PIC interrupts from being resent in software by marking them level triggered, as they should be, which lead to a NULL ptr deref * tag 'x86_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Move '-mindirect-branch-cs-prefix' out of GCC-only block acpi: Fix suspend with Xen PV x86/sev: Add SEV-SNP guest feature negotiation support x86/pci/xen: Fixup fallout from the PCI/MSI overhaul x86/pci/xen: Set MSI_FLAG_PCI_MSIX support in Xen MSI domain x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL
2023-01-29Merge tag 'input-for-v6.2-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - touchpads on HP 15-* laptops switched back to PS/2 emulation mode - a quirk for Clevo PCX0DX/TUXEDO XP1511 to make sure keyboard is responding after resume * tag 'input-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Clevo PCX0DX to i8042 quirk table Revert "Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode"
2023-01-29Merge tag 'cxl-fixes-for-6.2-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull cxl fixes from Dan Williams: "A couple of fixes for bugs introduced during the merge window. One is a regression, the other was a bug in the CXL AER handler: - Fix a crash regression due to module load order of cxl_pmem.ko - Fix wrong register offset read in CXL AER handling path" * tag 'cxl-fixes-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl/pmem: Fix nvdimm unregistration when cxl_pmem driver is absent cxl: fix cxl_report_and_clear() RAS UE addr mis-assignment
2023-01-29RDMA/irdma: Fix potential NULL-ptr-dereferenceNikita Zhandarovich
in_dev_get() can return NULL which will cause a failure once idev is dereferenced in in_dev_for_each_ifa_rtnl(). This patch adds a check for NULL value in idev beforehand. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 146b9756f14c ("RDMA/irdma: Add connection manager") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Link: https://lore.kernel.org/r/20230126185230.62464-1-n.zhandarovich@fintech.ru Reviewed-by: Sindhu Devale <sindhu.devale@intel.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-01-28nvdimm: Support sizeof(struct page) > MAX_STRUCT_PAGE_SIZEDan Williams
Commit 6e9f05dc66f9 ("libnvdimm/pfn_dev: increase MAX_STRUCT_PAGE_SIZE") ...updated MAX_STRUCT_PAGE_SIZE to account for sizeof(struct page) potentially doubling in the case of CONFIG_KMSAN=y. Unfortunately this doubles the amount of capacity stolen from user addressable capacity for everyone, regardless of whether they are using the debug option. Revert that change, mandate that MAX_STRUCT_PAGE_SIZE never exceed 64, but allow for debug scenarios to proceed with creating debug sized page maps with a compile option to support debug scenarios. Note that this only applies to cases where the page map is permanent, i.e. stored in a reservation of the pmem itself ("--map=dev" in "ndctl create-namespace" terms). For the "--map=mem" case, since the allocation is ephemeral for the lifespan of the namespace, there are no explicit restriction. However, the implicit restriction, of having enough available "System RAM" to store the page map for the typically large pmem, still applies. Fixes: 6e9f05dc66f9 ("libnvdimm/pfn_dev: increase MAX_STRUCT_PAGE_SIZE") Cc: <stable@vger.kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Marco Elver <elver@google.com> Reported-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Yu Zhao <yuzhao@google.com> Link: https://lore.kernel.org/r/167467815773.463042.7022545814443036382.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-01-28Merge tag 'fpga-for-6.2-final' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-linus Xy writes: FPGA Manager changes for 6.2-final stratix10-soc: - Zheng's change fixes return value check Intel m10 bmc secure update: - Ilpo's change fixes probe rollback All patches have been reviewed on the mailing list, and have been in the last linux-next releases (as part of our for-6.2 branch) Signed-off-by: Xu Yilun <yilun.xu@intel.com> * tag 'fpga-for-6.2-final' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga: fpga: m10bmc-sec: Fix probe rollback fpga: stratix10-soc: Fix return value check in s10_ops_write_init()
2023-01-28nvmem: qcom-spmi-sdam: fix module autoloadingJohan Hovold
Add the missing module device table so that the driver can be autoloaded when built as a module. Fixes: 40ce9798794f ("nvmem: add QTI SDAM driver") Cc: stable@vger.kernel.org # 5.6 Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230127104015.23839-11-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-28nvmem: core: fix return valueRussell King (Oracle)
Dan Carpenter points out that the return code was not set in commit 60c8b4aebd8e ("nvmem: core: fix cleanup after dev_set_name()"), but this is not the only issue - we also need to zero wp_gpio to prevent gpiod_put() being called on an error value. Fixes: 560181d3ace6 ("nvmem: core: fix cleanup after dev_set_name()") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230127104015.23839-10-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-28nvmem: core: fix cell removal on errorMichael Walle
nvmem_add_cells() could return an error after some cells are already added to the provider. In this case, the added cells are not removed. Remove any registered cells if nvmem_add_cells() fails. Fixes: fa72d847d68d7 ("nvmem: check the return value of nvmem_add_cells()") Cc: stable@vger.kernel.org Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230127104015.23839-9-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-28nvmem: core: fix device node refcountingMichael Walle
In of_nvmem_cell_get(), of_get_next_parent() is used on cell_np. This will decrement the refcount on cell_np, but cell_np is still used later in the code. Use of_get_parent() instead and of_node_put() in the appropriate places. Fixes: 69aba7948cbe ("nvmem: Add a simple NVMEM framework for consumers") Fixes: 7ae6478b304b ("nvmem: core: rework nvmem cell instance creation") Cc: stable@vger.kernel.org Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230127104015.23839-8-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-28nvmem: core: fix registration vs use raceRussell King (Oracle)
The i.MX6 CPU frequency driver sometimes fails to register at boot time due to nvmem_cell_read_u32() sporadically returning -ENOENT. This happens because there is a window where __nvmem_device_get() in of_nvmem_cell_get() is able to return the nvmem device, but as cells have been setup, nvmem_find_cell_entry_by_node() returns NULL. The occurs because the nvmem core registration code violates one of the fundamental principles of kernel programming: do not publish data structures before their setup is complete. Fix this by making nvmem core code conform with this principle. Fixes: eace75cfdcf7 ("nvmem: Add a simple NVMEM framework for nvmem providers") Cc: stable@vger.kernel.org Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230127104015.23839-7-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-28nvmem: core: fix cleanup after dev_set_name()Russell King (Oracle)
If dev_set_name() fails, we leak nvmem->wp_gpio as the cleanup does not put this. While a minimal fix for this would be to add the gpiod_put() call, we can do better if we split device_register(), and use the tested nvmem_release() cleanup code by initialising the device early, and putting the device. This results in a slightly larger fix, but results in clear code. Note: this patch depends on "nvmem: core: initialise nvmem->id early" and "nvmem: core: remove nvmem_config wp_gpio". Fixes: 5544e90c8126 ("nvmem: core: add error handling for dev_set_name") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [Srini: Fixed subject line and error code handing with wp_gpio while applying.] Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230127104015.23839-6-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-28nvmem: core: remove nvmem_config wp_gpioRussell King (Oracle)
No one provides wp_gpio, so let's remove it to avoid issues with the nvmem core putting this gpio. Cc: stable@vger.kernel.org Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230127104015.23839-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-30 11:09:09 +0000