summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-12-03net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zeroLee Jones
Currently, due to the sequential use of min_t() and clamp_t() macros, in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is not set, the logic sets tx_max to 0. This is then used to allocate the data area of the SKB requested later in cdc_ncm_fill_tx_frame(). This does not cause an issue presently because when memory is allocated during initialisation phase of SKB creation, more memory (512b) is allocated than is required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b). However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b). Consequently the SKB bounds checking semantics fails and panics: skbuff: skb_over_panic: text:ffffffff830a5b5f len:184 put:172 \ head:ffff888119227c00 data:ffff888119227c00 tail:0xb8 end:0x80 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:110! RIP: 0010:skb_panic+0x14f/0x160 net/core/skbuff.c:106 <snip> Call Trace: <IRQ> skb_over_panic+0x2c/0x30 net/core/skbuff.c:115 skb_put+0x205/0x210 net/core/skbuff.c:1877 skb_put_zero include/linux/skbuff.h:2270 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1116 [inline] cdc_ncm_fill_tx_frame+0x127f/0x3d50 drivers/net/usb/cdc_ncm.c:1293 cdc_ncm_tx_fixup+0x98/0xf0 drivers/net/usb/cdc_ncm.c:1514 By overriding the max value with the default CDC_NCM_NTB_MAX_SIZE_TX when not offered through the system provided params, we ensure enough data space is allocated to handle the CDC data, meaning no crash will occur. Cc: Oliver Neukum <oliver@neukum.org> Fixes: 289507d3364f9 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20211202143437.1411410-1-lee.jones@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-03qede: validate non LSO skb lengthManish Chopra
Although it is unlikely that stack could transmit a non LSO skb with length > MTU, however in some cases or environment such occurrences actually resulted into firmware asserts due to packet length being greater than the max supported by the device (~9700B). This patch adds the safeguard for such odd cases to avoid firmware asserts. v2: Added "Fixes" tag with one of the initial driver commit which enabled the TX traffic actually (as this was probably day1 issue which was discovered recently by some customer environment) Fixes: a2ec6172d29c ("qede: Add support for link") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20211203174413.13090-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-03Merge tag 'vfio-v5.16-rc4' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO fixes from Alex Williamson: - Fix OpRegion pointer arithmetic (Zhenyu Wang) - Fix comment format triggering kernel-doc warnings (Randy Dunlap) * tag 'vfio-v5.16-rc4' of git://github.com/awilliam/linux-vfio: vfio/pci: Fix OpRegion read vfio: remove all kernel-doc notation
2021-12-03Merge tag 'pm-5.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a CPU hot-add issue in the cpufreq core, fix a comment in the cpufreq core code and update its documentation, and disable the DTPM (Dynamic Thermal Power Management) code for the time being to prevent it from causing issues to appear. Specifics: - Disable DTPM for this cycle to prevent it from causing issues to appear on otherwise functional systems (Daniel Lezcano) - Fix cpufreq sysfs interface failure related to physical CPU hot-add (Xiongfeng Wang) - Fix comment in cpufreq core and update its documentation (Tang Yizhou)" * tag 'pm-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap: DTPM: Drop unused local variable from init_dtpm() cpufreq: docs: Update core.rst cpufreq: Fix a comment in cpufreq_policy_free powercap/drivers/dtpm: Disable DTPM at boot time cpufreq: Fix get_cpu_device() failure in add_cpu_dev_symlink()
2021-12-03drm/i915: Fix error pointer dereference in i915_gem_do_execbuffer()Dan Carpenter
Originally "out_fence" was set using out_fence = sync_file_create() but which returns NULL, but now it is set with out_fence = eb_requests_create() which returns error pointers. The error path needs to be modified to avoid an Oops in the "goto err_request;" path. Fixes: 544460c33821 ("drm/i915: Multi-BB execbuf") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211202044831.29583-1-matthew.brost@intel.com
2021-12-03treewide: Add missing includes masked by cgroup -> bpf dependencyJakub Kicinski
cgroup.h (therefore swap.h, therefore half of the universe) includes bpf.h which in turn includes module.h and slab.h. Since we're about to get rid of that dependency we need to clean things up. v2: drop the cpu.h include from cacheinfo.h, it's not necessary and it makes riscv sensitive to ordering of include files. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Krzysztof Wilczyński <kw@linux.com> Acked-by: Peter Chen <peter.chen@kernel.org> Acked-by: SeongJae Park <sj@kernel.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/all/20211120035253.72074-1-kuba@kernel.org/ # v1 Link: https://lore.kernel.org/all/20211120165528.197359-1-kuba@kernel.org/ # cacheinfo discussion Link: https://lore.kernel.org/bpf/20211202203400.1208663-1-kuba@kernel.org
2021-12-03Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "I2C has another set of driver bugfixes, mostly for the stm32f7 driver" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: rk3x: Handle a spurious start completion interrupt flag i2c: stm32f7: use proper DMAENGINE API for termination i2c: stm32f7: stop dma transfer in case of NACK i2c: stm32f7: recover the bus on access timeout i2c: stm32f7: flush TX FIFO upon transfer errors i2c: cbus-gpio: set atomic transfer callback
2021-12-03Merge tag 'libata-5.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull libata fixes from Damien Le Moal: "Two sparse warning fixes and a couple of patches to fix an issue with sata_fsl driver module removal: - A couple of patches to avoid sparse warnings in libata-sata and in the pata_falcon driver (from Yang and Finn). - A couple of sata_fsl driver patches fixing IRQ free and proc unregister on module removal (from Baokun)" * tag 'libata-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: replace snprintf in show functions with sysfs_emit sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl pata_falcon: Avoid type warnings from sparse
2021-12-03drm/i915/adl_p: Add ddc pin mappingTejas Upadhyay
From VBT, ddc pin info suggests the following mapping: VBT DRIVER DDI TC1->ddc_pin=3 should translate to PORT_TC1->0x9 DDI TC2->ddc_pin=4 should translate to PORT_TC2->0xa DDI TC3->ddc_pin=5 should translate to PORT_TC3->0xb DDI TC4->ddc_pin=6 should translate to PORT_TC4->0xc Adding pin map to facilitate this translation as we cannot use existing icl ddc pin map due to conflict with DDI C and DDI TC1 info. Bspec:20124 v2: - Changed Author to Tejas Upadhyay Cc: Clinton Taylor <Clinton.A.Taylor@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com> Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Signed-off-by: Raviteja Goud Talla <ravitejax.goud.talla@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211203073720.3823371-1-ravitejax.goud.talla@intel.com
2021-12-03drm/i915/gen11: Moving WAs to icl_gt_workarounds_init()Raviteja Goud Talla
Bspec page says "Reset: BUS", Accordingly moving w/a's: Wa_1407352427,Wa_1406680159 to proper function icl_gt_workarounds_init() Which will resolve guc enabling error v2: - Previous patch rev2 was created by email client which caused the Build failure, This v2 is to resolve the previous broken series Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Raviteja Goud Talla <ravitejax.goud.talla@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211203145603.4006937-1-ravitejax.goud.talla@intel.com
2021-12-03of/irq: Add a quirk for controllers with their own definition of interrupt-mapMarc Zyngier
Since commit 041284181226 ("of/irq: Allow matching of an interrupt-map local to an interrupt controller"), a handful of interrupt controllers have stopped working correctly. This is due to the DT exposing a non-sensical interrupt-map property, and their drivers relying on the kernel ignoring this property. Since we cannot realistically fix this terrible behaviour, add a quirk for the limited set of devices that have implemented this monster, and document that this is a pretty bad practice. Fixes: 041284181226 ("of/irq: Allow matching of an interrupt-map local to an interrupt controller") Cc: Rob Herring <robh@kernel.org> Cc: John Crispin <john@phrozen.org> Cc: Biwen Li <biwen.li@nxp.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Sander Vanheule <sander@svanheule.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20211201114102.13446-1-maz@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2021-12-03drm/i915: Get rid of the "sizes are 0 based" stuffVille Syrjälä
Replace the "sizes are 0 based" stuff with just straight up -1 where needed. Less confusing all around. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-4-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-12-03drm/i915/fbc: Pimp the FBC debugfs outputVille Syrjälä
Now that each plane tracks its own no_fbc_reason we can print that out in debugfs, and we can also show which plane is currently selected for FBC duty. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-21-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-12-03Merge branch 'powercap'Rafael J. Wysocki
Merge DTPM fixes for 5.16-rc4. * powercap: powercap: DTPM: Drop unused local variable from init_dtpm() powercap/drivers/dtpm: Disable DTPM at boot time
2021-12-03powercap: DTPM: Drop unused local variable from init_dtpm()Rafael J. Wysocki
The dtpm_descr variable in init_dtpm() is not used after commit f751db8adaea ("powercap/drivers/dtpm: Disable DTPM at boot time"), so drop it. Fixes: f751db8adaea ("powercap/drivers/dtpm: Disable DTPM at boot time") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-12-03net: altera: set a couple error code in probe()Dan Carpenter
There are two error paths which accidentally return success instead of a negative error code. Fixes: bbd2190ce96d ("Altera TSE: Add main and header file for Altera Ethernet Driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03net: bcm4908: Handle dma_set_coherent_mask error codesJiasheng Jiang
The return value of dma_set_coherent_mask() is not always 0. To catch the exception in case that dma is not support the mask. Fixes: 9d61d138ab30 ("net: broadcom: rename BCM4908 driver & update DT binding") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03bonding: make tx_rebalance_counter an atomicEric Dumazet
KCSAN reported a data-race [1] around tx_rebalance_counter which can be accessed from different contexts, without the protection of a lock/mutex. [1] BUG: KCSAN: data-race in bond_alb_init_slave / bond_alb_monitor write to 0xffff888157e8ca24 of 4 bytes by task 7075 on cpu 0: bond_alb_init_slave+0x713/0x860 drivers/net/bonding/bond_alb.c:1613 bond_enslave+0xd94/0x3010 drivers/net/bonding/bond_main.c:1949 do_set_master net/core/rtnetlink.c:2521 [inline] __rtnl_newlink net/core/rtnetlink.c:3475 [inline] rtnl_newlink+0x1298/0x13b0 net/core/rtnetlink.c:3506 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5571 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2491 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5589 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x5fc/0x6c0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x6e1/0x7d0 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg net/socket.c:724 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2409 ___sys_sendmsg net/socket.c:2463 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2492 __do_sys_sendmsg net/socket.c:2501 [inline] __se_sys_sendmsg net/socket.c:2499 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2499 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888157e8ca24 of 4 bytes by task 1082 on cpu 1: bond_alb_monitor+0x8f/0xc00 drivers/net/bonding/bond_alb.c:1511 process_one_work+0x3fc/0x980 kernel/workqueue.c:2298 worker_thread+0x616/0xa70 kernel/workqueue.c:2445 kthread+0x2c7/0x2e0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 value changed: 0x00000001 -> 0x00000064 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 1082 Comm: kworker/u4:3 Not tainted 5.16.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: bond1 bond_alb_monitor Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03mtd: dataflash: Add device-tree SPI IDsJon Hunter
Commit 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT compatible") added a test to check that every SPI driver has a spi_device_id for each DT compatiable string defined by the driver and warns if the spi_device_id is missing. The spi_device_ids are missing for the dataflash driver and the following warnings are now seen. WARNING KERN SPI driver mtd_dataflash has no spi_device_id for atmel,at45 WARNING KERN SPI driver mtd_dataflash has no spi_device_id for atmel,dataflash Fix this by adding the necessary spi_device_ids. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211130112443.107730-1-jonathanh@nvidia.com
2021-12-03mtd: rawnand: fsmc: Fix timing computationHerve Codina
Under certain circumstances, the timing settings calculated by the FSMC NAND controller driver were inaccurate. These settings led to incorrect data reads or fallback to timing mode 0 depending on the NAND chip used. The timing computation did not take into account the following constraint given in SPEAr3xx reference manual: twait >= tCEA - (tset * TCLK) + TOUTDEL + TINDEL Enhance the timings calculation by taking into account this additional constraint. This change has no impact on slow timing modes such as mode 0. Indeed, on mode 0, computed values are the same with and without the patch. NANDs which previously stayed in mode 0 because of fallback to mode 0 can now work at higher speeds and NANDs which were not working at all because of the corrupted data work at high speeds without troubles. Overall improvement on a Micron/MT29F1G08 (flash_speed tool): mode0 mode3 eraseblock write speed 3220 KiB/s 4511 KiB/s eraseblock read speed 4491 KiB/s 7529 KiB/s Fixes: d9fb079571833 ("mtd: nand: fsmc: add support for SDR timings") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-5-herve.codina@bootlin.com
2021-12-03mtd: rawnand: fsmc: Take instruction delay into accountHerve Codina
The FSMC NAND controller should apply a delay after the instruction has been issued on the bus. The FSMC NAND controller driver did not handle this delay. Add this waiting delay in the FSMC NAND controller driver. Fixes: 4da712e70294 ("mtd: nand: fsmc: use ->exec_op()") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-4-herve.codina@bootlin.com
2021-12-03mtd: rawnand: Fix nand_choose_best_timings() on unsupported interfaceHerve Codina
When the NV-DDR interface is not supported by the NAND chip, the value of onfi->nvddr_timing_modes is 0. In this case, the best_mode variable value in nand_choose_best_nvddr_timings() is -1. The last for-loop is skipped and the function returns an uninitialized value. If this returned value is 0, the nand_choose_best_sdr_timings() is not executed and no 'best timing' are set. This leads the host controller and the NAND chip working at default mode 0 timing even if a better timing can be used. Fix this uninitialized returned value. nand_choose_best_sdr_timings() is pretty similar to nand_choose_best_nvddr_timings(). Even if onfi->sdr_timing_modes should never be seen as 0, nand_choose_best_sdr_timings() returned value is fixed. Fixes: a9ecc8c814e9 ("mtd: rawnand: Choose the best timings, NV-DDR included") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-3-herve.codina@bootlin.com
2021-12-03mtd: rawnand: Fix nand_erase_op delayHerve Codina
NAND_OP_CMD() expects a delay parameter in nanoseconds. The delay value is wrongly given in milliseconds. Fix the conversion macro used in order to set this delay in nanoseconds. Fixes: d7a773e8812b ("mtd: rawnand: Access SDR and NV-DDR timings through a common macro") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211119150316.43080-2-herve.codina@bootlin.com
2021-12-03mtd: rawnand: denali: Add the dependency on HAS_IOMEMCai Huoqing
The helper function devm_platform_ioremap_resource_xxx() needs HAS_IOMEM enabled, so add the dependency on HAS_IOMEM. Fixes: 5f14a8ca1b49 ("mtd: rawnand: denali: Make use of the helper function devm_platform_ioremap_resource_byname()") Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211109134758.417-1-caihuoqing@baidu.com
2021-12-03misc: rtsx: Avoid mangling IRQ during runtime PMKai-Heng Feng
After commit 5b4258f6721f ("misc: rtsx: rts5249 support runtime PM"), when the rtsx controller is runtime suspended, bring CPUs offline and back online, the runtime resume of the controller will fail: [ 47.319391] smpboot: CPU 1 is now offline [ 47.414140] x86: Booting SMP configuration: [ 47.414147] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 47.571334] smpboot: CPU 2 is now offline [ 47.686055] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 47.808174] smpboot: CPU 3 is now offline [ 47.878146] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 48.003679] smpboot: CPU 4 is now offline [ 48.086187] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 48.239627] smpboot: CPU 5 is now offline [ 48.326059] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 48.472193] smpboot: CPU 6 is now offline [ 48.574181] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 48.743375] smpboot: CPU 7 is now offline [ 48.838047] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 48.965447] __common_interrupt: 1.35 No irq handler for vector [ 51.174065] mmc0: error -110 doing runtime resume [ 54.978088] I/O error, dev mmcblk0, sector 21479 op 0x1:(WRITE) flags 0x0 phys_seg 11 prio class 0 [ 54.978108] Buffer I/O error on dev mmcblk0p1, logical block 19431, lost async page write [ 54.978129] Buffer I/O error on dev mmcblk0p1, logical block 19432, lost async page write [ 54.978134] Buffer I/O error on dev mmcblk0p1, logical block 19433, lost async page write [ 54.978137] Buffer I/O error on dev mmcblk0p1, logical block 19434, lost async page write [ 54.978141] Buffer I/O error on dev mmcblk0p1, logical block 19435, lost async page write [ 54.978145] Buffer I/O error on dev mmcblk0p1, logical block 19436, lost async page write [ 54.978148] Buffer I/O error on dev mmcblk0p1, logical block 19437, lost async page write [ 54.978152] Buffer I/O error on dev mmcblk0p1, logical block 19438, lost async page write [ 54.978155] Buffer I/O error on dev mmcblk0p1, logical block 19439, lost async page write [ 54.978160] Buffer I/O error on dev mmcblk0p1, logical block 19440, lost async page write [ 54.978244] mmc0: card aaaa removed [ 54.978452] FAT-fs (mmcblk0p1): FAT read failed (blocknr 4257) There's interrupt immediately raised on rtsx_pci_write_register() in runtime resume routine, but the IRQ handler hasn't registered yet. So we can either move rtsx_pci_write_register() after rtsx_pci_acquire_irq(), or just stop mangling IRQ on runtime PM. Choose the latter to save some CPU cycles. Fixes: 5b4258f6721f ("misc: rtsx: rts5249 support runtime PM") Cc: stable <stable@vger.kernel.org> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> BugLink: https://bugs.launchpad.net/bugs/1951784 Link: https://lore.kernel.org/r/20211126003246.1068770-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03nvmem: eeprom: at25: fix FRAM byte_lenRalph Siemsen
Commit fd307a4ad332 ("nvmem: prepare basics for FRAM support") added support for FRAM devices such as the Cypress FM25V. During testing, it was found that the FRAM detects properly, however reads and writes fail. Upon further investigation, two problem were found in at25_probe() routine. 1) In the case of an FRAM device without platform data, eg. fram == true && spi->dev.platform_data == NULL the stack local variable "struct spi_eeprom chip" is not initialized fully, prior to being copied into at25->chip. The chip.flags field in particular can cause problems. 2) The byte_len of FRAM is computed from its ID register, and is stored into the stack local "struct spi_eeprom chip" structure. This happens after the same structure has been copied into at25->chip. As a result, at25->chip.byte_len does not contain the correct length of the device. In turn this can cause checks at beginning of at25_ee_read() to fail (or equally, it could allow reads beyond the end of the device length). Fix both of these issues by eliminating the on-stack struct spi_eeprom. Instead use the one inside at25_data structure, which starts of zeroed. Fixes: fd307a4ad332 ("nvmem: prepare basics for FRAM support") Cc: stable <stable@vger.kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> Link: https://lore.kernel.org/r/20211108181627.645638-1-ralph.siemsen@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03misc: fastrpc: fix improper packet size calculationJeya R
The buffer list is sorted and this is not being considered while calculating packet size. This would lead to improper copy length calculation for non-dmaheap buffers which would eventually cause sending improper buffers to DSP. Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method") Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Jeya R <jeyr@codeaurora.org> Link: https://lore.kernel.org/r/1637771481-4299-1-git-send-email-jeyr@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03serial: 8250_bcm7271: UART errors after resuming from S2Al Cooper
There is a small window in time during resume where the hardware flow control signal RTS can be asserted (which allows a sender to resume sending data to the UART) but the baud rate has not yet been restored. This will cause corrupted data and FRAMING, OVERRUN and BREAK errors. This is happening because the MCTRL register is shadowed in uart_port struct and is later used during resume to set the MCTRL register during both serial8250_do_startup() and uart_resume_port(). Unfortunately, serial8250_do_startup() happens before the UART baud rate is restored. The fix is to clear the shadowed mctrl value at the end of suspend and restore it at the end of resume. Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver") Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20211201201402.47446-1-alcooperx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03drm/ttm: fix ttm_bo_swapoutChristian König
Commit 7120a447c7fe ("drm/ttm: Double check mem_type of BO while eviction") made ttm_bo_evict_swapout_allowable() function actually check the placement, but we always used a dummy placement in ttm_bo_swapout. Fix this by using the real placement instead. Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 7120a447c7fe ("drm/ttm: Double check mem_type of BO while eviction") Reviewed-by: Pan, Xinhui <Xinhui.Pan@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211202103828.44573-1-christian.koenig@amd.com
2021-12-03usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init()Zhou Qingyang
In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring and there is a dereference of it in cdnsp_endpoint_init(), which could lead to a NULL pointer dereference on failure of cdnsp_ring_alloc(). Fix this bug by adding a check of pep->ring. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings, and our static analyzer no longer warns about this code. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Cc: stable <stable@vger.kernel.org> Acked-by: Pawel Laszczak <pawell@cadence.com> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Link: https://lore.kernel.org/r/20211130172700.206650-1-zhou1615@umn.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03usb: cdns3: gadget: fix new urb never complete if ep cancel previous requestsFrank Li
This issue was found at android12 MTP. 1. MTP submit many out urb request. 2. Cancel left requests (>20) when enough data get from host 3. Send ACK by IN endpoint. 4. MTP submit new out urb request. 5. 4's urb never complete. TRACE LOG: MtpServer-2157 [000] d..3 1287.150391: cdns3_ep_dequeue: ep1out: req: 00000000299e6836, req buff 000000009df42287, length: 0/16384 zsi, status: -115, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:1 SID: 0 MtpServer-2157 [000] d..3 1287.150410: cdns3_gadget_giveback: ep1out: req: 00000000299e6836, req buff 000000009df42287, length: 0/16384 zsi, status: -104, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:0 SID: 0 MtpServer-2157 [000] d..3 1287.150433: cdns3_ep_dequeue: ep1out: req: 0000000080b7bde6, req buff 000000009ed5c556, length: 0/16384 zsi, status: -115, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:1 SID: 0 MtpServer-2157 [000] d..3 1287.150446: cdns3_gadget_giveback: ep1out: req: 0000000080b7bde6, req buff 000000009ed5c556, length: 0/16384 zsi, status: -104, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:0 SID: 0 .... MtpServer-2157 [000] d..1 1293.630410: cdns3_alloc_request: ep1out: req: 00000000afbccb7d, req buff 0000000000000000, length: 0/0 zsi, status: 0, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0 MtpServer-2157 [000] d..2 1293.630421: cdns3_ep_queue: ep1out: req: 00000000afbccb7d, req buff 00000000871caf90, length: 0/512 zsi, status: -115, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0 MtpServer-2157 [000] d..2 1293.630445: cdns3_wa1: WA1: ep1out set guard MtpServer-2157 [000] d..2 1293.630450: cdns3_wa1: WA1: ep1out restore cycle bit MtpServer-2157 [000] d..2 1293.630453: cdns3_prepare_trb: ep1out: trb 000000007317b3ee, dma buf: 0xffd5bc00, size: 512, burst: 128 ctrl: 0x00000424 (C=0, T=0, ISP, IOC, Normal) SID:0 LAST_SID:0 MtpServer-2157 [000] d..2 1293.630460: cdns3_doorbell_epx: ep1out, ep_trbaddr ffd50414 .... irq/241-5b13000-2154 [000] d..1 1293.680849: cdns3_epx_irq: IRQ for ep1out: 01000408 ISP , ep_traddr: ffd508ac ep_last_sid: 00000000 use_streams: 0 irq/241-5b13000-2154 [000] d..1 1293.680858: cdns3_complete_trb: ep1out: trb 0000000021a11b54, dma buf: 0xffd50420, size: 16384, burst: 128 ctrl: 0x00001810 (C=0, T=0, CHAIN, LINK) SID:0 LAST_SID:0 irq/241-5b13000-2154 [000] d..1 1293.680865: cdns3_request_handled: Req: 00000000afbccb7d not handled, DMA pos: 185, ep deq: 88, ep enq: 185, start trb: 184, end trb: 184 Actually DMA pos already bigger than previous submit request afbccb7d's TRB (184-184). The reason of (not handled) is that deq position is wrong. The TRB link is below when irq happen. DEQ LINK LINK LINK LINK LINK .... TRB(afbccb7d):START DMA(EP_TRADDR). Original code check LINK TRB, but DEQ just move one step. LINK DEQ LINK LINK LINK LINK .... TRB(afbccb7d):START DMA(EP_TRADDR). This patch skip all LINK TRB and sync DEQ to trb's start. LINK LINK LINK LINK LINK .... DEQ = TRB(afbccb7d):START DMA(EP_TRADDR). Acked-by: Peter Chen <peter.chen@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Jun Li <jun.li@nxp.com> Link: https://lore.kernel.org/r/20211130154239.8029-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnectBadhri Jagan Sridharan
Stub from the spec: "4.5.2.2.4.2 Exiting from AttachWait.SNK State A Sink shall transition to Unattached.SNK when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce. A DRP shall transition to Unattached.SRC when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce." This change makes TCPM to wait in SNK_DEBOUNCED state until CC1 and CC2 pins is SNK.Open for at least tPDDebounce. Previously, TCPM resets the port if vbus is not present in PD_T_PS_SOURCE_ON. This causes TCPM to loop continuously when connected to a faulty power source that does not present vbus. Waiting in SNK_DEBOUNCED also ensures that TCPM is adherant to "4.5.2.2.4.2 Exiting from AttachWait.SNK State" requirements. [ 6169.280751] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 6169.280759] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS] [ 6169.280771] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS] [ 6169.282427] CC1: 0 -> 0, CC2: 5 -> 5 [state SNK_ATTACH_WAIT, polarity 0, connected] [ 6169.450825] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 6169.450834] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS] [ 6169.930892] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms] [ 6169.931296] disable vbus discharge ret:0 [ 6169.931301] Setting usb_comm capable false [ 6169.932783] Setting voltage/current limit 0 mV 0 mA [ 6169.932802] polarity 0 [ 6169.933706] Requesting mux state 0, usb-role 0, orientation 0 [ 6169.936689] cc:=0 [ 6169.936812] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS] [ 6169.937157] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected] [ 6170.036880] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms] [ 6170.036890] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev2 NONE_AMS] [ 6170.036896] Start toggling [ 6170.041412] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [ 6170.042973] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 6170.042976] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS] [ 6170.042981] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS] [ 6170.213014] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 6170.213019] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS] [ 6170.693068] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms] [ 6170.693304] disable vbus discharge ret:0 [ 6170.693308] Setting usb_comm capable false [ 6170.695193] Setting voltage/current limit 0 mV 0 mA [ 6170.695210] polarity 0 [ 6170.695990] Requesting mux state 0, usb-role 0, orientation 0 [ 6170.701896] cc:=0 [ 6170.702181] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS] [ 6170.703343] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected] Fixes: f0690a25a140b8 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20211130001825.3142830-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03USB: NO_LPM quirk Lenovo Powered USB-C Travel HubOle Ernst
This is another branded 8153 device that doesn't work well with LPM: r8152 2-2.1:1.0 enp0s13f0u2u1: Stop submitting intr, status -71 Disable LPM to resolve the issue. Signed-off-by: Ole Ernst <olebowle@gmx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211127090546.52072-1-olebowle@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03xhci: Fix commad ring abort, write all 64 bits to CRCR register.Mathias Nyman
Turns out some xHC controllers require all 64 bits in the CRCR register to be written to execute a command abort. The lower 32 bits containing the command abort bit is written first. In case the command ring stops before we write the upper 32 bits then hardware may use these upper bits to set the commnd ring dequeue pointer. Solve this by making sure the upper 32 bits contain a valid command ring dequeue pointer. The original patch that only wrote the first 32 to stop the ring went to stable, so this fix should go there as well. Fixes: ff0e50d3564f ("xhci: Fix command ring pointer corruption while aborting a command") Cc: stable@vger.kernel.org Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211126122340.1193239-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03drm/i915/fbc: No FBC+double wide pipeVille Syrjälä
FBC and double wide pipe are mutually exclusive. Disable FBC when we have to resort to double wide. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-20-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03drm/i915/fbc: s/parms/fbc_state/Ville Syrjälä
Rename the 'params' to just fbc state. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-19-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03drm/i915/fbc: Move plane pointer into intel_fbc_stateVille Syrjälä
Currently we track the FBC plane as a pointer under intel_fbc and also as a i9xx_plane_id under intel_fbc_state. Just store the pointer once in the fbc state. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-18-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03drm/i915/fbc: Nuke state_cacheVille Syrjälä
fbc->state_cache has now become useless. We can simply update the reg params directly from the plane/crtc states during __intel_fbc_enable(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-17-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03drm/i915/fbc: Disable FBC fully on FIFO underrunVille Syrjälä
Currently a FIFO underrun just causes FBC to be deactivated, and later checks then prevent it from being reactivated. We can simpify our lives a bit by logically disabling FBC on FIFO underruns. This avoids the funny intermediate state where FBC is logically enabled but can't actually be activated. v2: intel_wait_for_vblank() is no more Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-16-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03drm/i915/fbc: Move stuff from intel_fbc_can_enable() into ↵Ville Syrjälä
intel_fbc_check_plane() Don't really see a good reason why we can't just do the vgpu and modparam checks already in intel_fbc_check_plane(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-15-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03drm/i915/fbc: Allocate intel_fbc dynamicallyVille Syrjälä
In the future we may have more than one FBC instance on some platforms. So let's just allocate it dynamically. This also lets us fully hide the implementation from prying eyes. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-14-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03drm/i915/fbc: Introduce intel_fbc_add_plane()Ville Syrjälä
In order to better encapsulate the FBC implementation introduce a small helper to do the plane<->FBC instance association. We'll also try to structure the plane init code such that introducing multiple FBC instances will be easier down the line. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-13-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03drm/i915/fbc: Move FBC debugfs stuff into intel_fbc.cVille Syrjälä
In order to encapsulate FBC harder let's just move the debugfs stuff into intel_fbc.c. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-12-ville.syrjala@linux.intel.com Acked-by: Jani Nikula <jani.nikula@intel.com>
2021-12-03drm/i915/fbc: Pass i915 instead of FBC instance to FBC underrun stuffVille Syrjälä
The underrun code doesn't need to know any details about FBC, so just pass in the whole device rather than a specific FBC instance. We could make this a bit more fine grained by also passing in the pipe to intel_fbc_handle_fifo_underrun_irq() and letting the FBC code figure which FBC instance (if any) is active on said pipe. But that seems a bit overkill for this so don't bother. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-11-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03drm/i915/fbc: Flatten __intel_fbc_pre_update()Ville Syrjälä
Use an early return to flatten most of __intel_fbc_pre_update(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-10-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03drm/i915/fbc: Track FBC usage per-planeVille Syrjälä
In the future we may have multiple planes on the same pipe capable of using FBC. Prepare for that by tracking FBC usage per-plane rather than per-crtc. v2: s/intel_get_crtc_for_pipe/intel_crtc_for_pipe/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-9-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03drm/i915/fbc: Pass around FBC instance instead of crtcVille Syrjälä
Pass the FBC instance instead of the crtc to a bunch of places. We also adjust intel_fbc_post_update() to do the intel_fbc_get_reg_params() things instead of doing it from the lower level function (which also gets called for front buffer tracking). Nothing in there will change during front buffer updates. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-8-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03drm/i915/fbc: Reuse the same struct for the cache and paramsVille Syrjälä
The FBC state cache and params are now nearly identical. Just use the same structure for both. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-7-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03drm/i915/fbc: Nuke more FBC stateVille Syrjälä
There isn't a good reason why we'd have to cache all this plane state stuff in the FBC state. Instead we can just pre-calculate what FBC will really need. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-6-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-12-03drm/i915/fbc: Relocate intel_fbc_override_cfb_stride()Ville Syrjälä
Move intel_fbc_override_cfb_stride() next to its cousins. Helps with later patches. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-5-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
generated by cgit (git 2.34.1) at 2025-09-23 01:21:53 +0000