| Age | Commit message (Collapse) | Author |
|---|
|
This code was re-organized and there some unlocks missing now.
Fixes: 898ef1cb1cb2 ("iavf: Combine init and watchdog state machines")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
J721S2 SoC's JTAG PARTNO is 0xBB75.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20211203120913.14737-1-a-govindraju@ti.com
|
|
Use page_pool_alloc_pages instead of page_pool_dev_alloc_pages, which
can give the gfp parameter, in the case of not supporting 64-bit width,
using 32-bit address memory can reduce a copy from swiotlb.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recently, a patch has been submitted to "fix" the refcounting for a DT
node in of_mdiobus_link_mdiodev(). This is not a leaked refcount. The
refcount is passed to the new device.
Sadly, coccicheck identifies this location as a leaked refcount, which
means we're likely to keep getting patches to "fix" this. However,
fixing this will cause breakage. Add a comment to state that the lack
of of_node_put() here is intentional.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix following coccicheck warning:
WARNING: Function "for_each_child_of_node"
should have of_node_put() before return.
Early exits from for_each_child_of_node should decrement the
node reference counter.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 64d47d50be7a ("net: dsa: mv88e6xxx: configure interface settings
in mac_config") removed forcing of speed and duplex from
mv88e6xxx_mac_config(), where the link is forced down, and left it only
in mv88e6xxx_mac_link_up(), by which time link is unforced.
It seems that (at least on 88E6190) when changing cmode to 2500base-x,
if the link is not forced down, but the speed or duplex are still
forced, the forcing of new settings for speed & duplex doesn't take in
mv88e6xxx_mac_link_up().
Fix this by unforcing speed & duplex in mv88e6xxx_mac_link_down().
Fixes: 64d47d50be7a ("net: dsa: mv88e6xxx: configure interface settings in mac_config")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The phy_attach() function does not return NULL. It returns error pointers.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Patch fixes incorrect status for control request.
Without this fix all usb_request objects were returned to upper drivers
with usb_reqest->status field set to -EINPROGRESS.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
cc: <stable@vger.kernel.org>
Reported-by: Ken (Jian) He <jianhe@ambarella.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20211207091838.39572-1-pawell@gli-login.cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Patch fixes incorrect order of __entry->stream_id and __entry->state
parameters in TP_printk macro.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
cc: <stable@vger.kernel.org>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20211213050609.22640-1-pawell@gli-login.cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Patch restrict calling of cdnsp_died function during removing modules
or software disconnect.
This function was called because after transition controller to HALT
state the driver starts handling the deferred interrupt.
In this case such interrupt can be simple ignored.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
cc: <stable@vger.kernel.org>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20211210112945.660-1-pawell@gli-login.cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is warning of 'list_del corruption' when enable list debug
(CONFIG_DEBUG_LIST=y), fix it by using list_del_init()
Fixes: 4ce186665e7c ("usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20211209025422.17108-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When listening for notifications through netlink of a new interface being
registered, sporadically, it is possible for the MAC to be read as zero.
The zero MAC address lasts a short period of time and then switches to a
valid random MAC address.
This causes problems for netd in Android, which assumes that the interface
is malfunctioning and will not use it.
In the good case we get this log:
InterfaceController::getCfg() ifName usb0
hwAddr 92:a8:f0:73:79:5b ipv4Addr 0.0.0.0 flags 0x1002
In the error case we get these logs:
InterfaceController::getCfg() ifName usb0
hwAddr 00:00:00:00:00:00 ipv4Addr 0.0.0.0 flags 0x1002
netd : interfaceGetCfg("usb0")
netd : interfaceSetCfg() -> ServiceSpecificException
(99, "[Cannot assign requested address] : ioctl() failed")
The reason for the issue is the order in which the interface is setup,
it is first registered through register_netdev() and after the MAC
address is set.
Fixed by first setting the MAC address of the net_device and after that
calling register_netdev().
Fixes: bcd4a1c40bee885e ("usb: gadget: u_ether: construct with default values and add setters/getters")
Cc: stable@vger.kernel.org
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20211204214912.17627-1-posteuca@mutex.one
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Without the bound checks for scpi_pd->name, it could result in the buffer
overflow when copying the SCPI device name from the corresponding device
tree node as the name string is set at maximum size of 30.
Let us fix it by using devm_kasprintf so that the string buffer is
allocated dynamically.
Fixes: 8bec4337ad40 ("firmware: scpi: add device power domain support using genpd")
Reported-by: Pedro Batista <pedbap.g@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: stable@vger.kernel.org
Cc: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20211209120456.696879-1-sudeep.holla@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.16, round 2:
- One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work
properly
- Fix CSI_DATA07__ESAI_TX0 pad name in i.MX7ULL pin function header
- Remove interconnect property from i.MX8MQ LCDIF device to fix the
regression that LCDIF driver stops probe, because interconnect
provider driver (imx-bus) hasn't been fully working.
- Fix soc-imx driver to register SoC device only on i.MX platform.
* tag 'imx-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: Register SoC device only on i.MX boards
soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset
ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name
arm64: dts: imx8mq: remove interconnect property from lcdif
Link: https://lore.kernel.org/r/20211211015625.GK4216@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
firmware: Fixes for v5.16-rc5
This contains a single fix for an incorrect usage of sizeof().
* tag 'tegra-for-5.16-firmware-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Fix error application of sizeof() to pointer
Link: https://lore.kernel.org/r/20211207162115.450554-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
AMD-TEE fix IS_ERR() bug
* tag 'amdtee-fix-for-v5.16' of git://git.linaro.org/people/jens.wiklander/linux-tee:
tee: amdtee: fix an IS_ERR() vs NULL bug
Link: https://lore.kernel.org/r/20211130070351.GA2308099@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
arm/fixes
Reset controller fixes for v5.16
Well, just one: revert commit c045ceb5a145 ("reset: tegra-bpmp: Handle
errors in BPMP response"), which exposed an issue with the Tegra194 HDA
controller reset. BPMP response error handling will be reinstated once
there's a fix for the HDA issue.
* tag 'reset-fixes-for-v5.16' of git://git.pengutronix.de/pza/linux:
reset: tegra-bpmp: Revert Handle errors in BPMP response
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
In commit 41ca9caaae0b
("drm/mediatek: hdmi: Add check for CEA modes only") a check
for CEA modes was added to function mtk_hdmi_bridge_mode_valid()
in order to address possible issues on MT8167;
moreover, with commit c91026a938c2
("drm/mediatek: hdmi: Add optional limit on maximal HDMI mode clock")
another similar check was introduced.
Unfortunately though, at the time of writing, MT8173 does not provide
any mtk_hdmi_conf structure and this is crashing the kernel with NULL
pointer upon entering mtk_hdmi_bridge_mode_valid(), which happens as
soon as a HDMI cable gets plugged in.
To fix this regression, add a NULL pointer check for hdmi->conf in the
said function, restoring HDMI functionality and avoiding NULL pointer
kernel panics.
Fixes: 41ca9caaae0b ("drm/mediatek: hdmi: Add check for CEA modes only")
Fixes: c91026a938c2 ("drm/mediatek: hdmi: Add optional limit on maximal HDMI mode clock")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Collect the dipslay related mask under the display sub-structure
in intel_device_info.
Note that there is a slight change in behaviour in that we zero
out .display entirely when !HAS_DISPLAY (aka. pipe_mask==0), so
now we also zero out the other masks (although cpu_transocder_mask
should already be zero of pipe_mask is zero). abox_mask is
only used by the display core init when HAS_DISPLAY is true, so
the actual behaviour of the system shouldn't change despite the
zeroing of these masks.
There is a lot more display stuff directly in device info that
could be moved over. Maybe someone else will be inspired to do it...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210122726.12577-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
When updating the error capture code and introducing vma snapshots,
we introduced code to hold the vma in memory while capturing it,
calling i915_active_acquire_if_busy(). Now that function isn't relevant
for perma-pinned vmas and caused important vmas to be dropped from the
coredump. Like for example the GuC log.
Fix this by instead requiring those vmas to be pinned while capturing.
Tested by running the initial subtests of the gem_exec_capture igt test
with GuC submission enabled and verifying that a GuC log blob appears
in the output.
Fixes: ff20afc4cee7 ("drm/i915: Update error capture code to avoid using the current vma state")
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reported-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211208082245.86933-1-thomas.hellstrom@linux.intel.com
|
|
The definition is not needed outside of intel_cdclk.c.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f7e7e7fb91eae2b49a0ab5d982a235cec34e3320.1639068649.git.jani.nikula@intel.com
|
|
Rename to intel_cdclk_atomic_check() and make
intel_cdclk_bw_calc_min_cdclk() static.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/43ad4d437121f43d76c790ac5d4d131743d58988.1639068649.git.jani.nikula@intel.com
|
|
Pixel clock has to be set in kHz.
Signed-off-by: Alejandro Concepcion-Rodriguez <asconcepcion@acoro.eu>
Fixes: 11e8f5fd223b ("drm: Add simpledrm driver")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/6f8554ef-1305-0dda-821c-f7d2e5644a48@acoro.eu
|
|
Not needed.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/01c4ea0cea17eead027c83dc9eaca3c181ce3a24.1639142167.git.jani.nikula@intel.com
|
|
In the interest of reducing include dependencies, un-inline
intel_pxp_is_enabled().
v2: Fix build for CONFIG_DRM_I915_PXP=n
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/36bbb3708f3b1f84f0718afff94212dde93cb479.1639142167.git.jani.nikula@intel.com
|
|
We actually need i915_active_types.h, not i915_active.h.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aed5f1afda4448ec46c7ff1f95291edebf355790.1639142167.git.jani.nikula@intel.com
|
|
Reduce include dependencies using forward declarations.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fb54050e03f830a1b29eb14cb37466f39c499cc2.1639142167.git.jani.nikula@intel.com
|
|
Reduce include dependencies using forward declarations.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ee35f2f01f731c21f24a238f2d1690b09ac2da1f.1639142167.git.jani.nikula@intel.com
|
|
Not needed.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/52b1cf56c16bf669a1357ce81d9232c5480914a4.1639142167.git.jani.nikula@intel.com
|
|
Use the more specific include that's needed.
v2: Include intel_display.h (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e1e195b8ca1252d1e149c8185d107a5517496973.1639142167.git.jani.nikula@intel.com
|
|
__timeline_mark_lock().
This is a revert of commits
d67739268cf0e ("drm/i915/gt: Mark up the nested engine-pm timeline lock as irqsafe")
6c69a45445af9 ("drm/i915/gt: Mark context->active_count as protected by timeline->mutex")
6dcb85a0ad990 ("drm/i915: Hold irq-off for the entire fake lock period")
The existing code leads to a different behaviour depending on whether
lockdep is enabled or not. Any following lock that is acquired without
disabling interrupts (but needs to) will not be noticed by lockdep.
This it not just a lockdep annotation but is used but an actual mutex_t
that is properly used as a lock but in case of __timeline_mark_lock()
lockdep is only told that it is acquired but no lock has been acquired.
It appears that its purpose is just satisfy the lockdep_assert_held()
check in intel_context_mark_active(). The other problem with disabling
interrupts is that on PREEMPT_RT interrupts are also disabled which
leads to problems for instance later during memory allocation.
Add a CONTEXT_IS_PARKING bit to intel_engine_cs and set_bit/clear_bit it
instead of mutex_acquire/mutex_release. Use test_bit in the two
identified spots which relied on the lockdep annotation.
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YbO8Ie1Nj7XcQPNQ@linutronix.de
|
|
modprobe can't handle spaces in aliases.
Fixes: 6b4cd727eaf1 ("dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Link: https://lore.kernel.org/r/20211125154441.2626214-1-hi@alyssa.is
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Ming reported that with the abort path of the descriptor submission, there
can be a window where a completed descriptor can be missed to be completed
by the irq completion thread:
CPU A CPU B
Submit (successful)
Submit (fail)
irq_process_work_list() // empty
llist_abort_desc()
// remove all descs from pending list
irq_process_pending_llist() // empty
exit idxd_wq_thread() with no processing
Add opportunistic descriptor completion in the abort path in order to
remove the missed completion.
Fixes: 6b4b87f2c31a ("dmaengine: idxd: fix submission race window")
Reported-by: Ming Li <ming4.li@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163898288714.443911.16084982766671976640.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Smatch reports below warnings [1] wrt dereferencing rm_res when it can
potentially be ERR_PTR(). This is possible when entire range is
allocated to Linux
Fix this case by making sure, there is no deference of rm_res when its
ERR_PTR().
[1]:
drivers/dma/ti/k3-udma.c:4524 udma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR()
drivers/dma/ti/k3-udma.c:4537 udma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR()
drivers/dma/ti/k3-udma.c:4681 bcdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR()
drivers/dma/ti/k3-udma.c:4696 bcdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR()
drivers/dma/ti/k3-udma.c:4711 bcdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR()
drivers/dma/ti/k3-udma.c:4848 pktdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR()
drivers/dma/ti/k3-udma.c:4861 pktdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR()
Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20211209180957.29036-1-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The "id_buf" buffer is stored in "data->raw_info_block" and freed by
"mxt_free_object_table" in case of error.
Return instead of jumping to avoid a double free.
Addresses-Coverity-ID: 1474582 ("Double free")
Fixes: 068bdb67ef74 ("Input: atmel_mxt_ts - fix the firmware update")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20211212194257.68879-1-jose.exposito89@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
smatch warning:
drivers/gpu/drm/i915/display/intel_dmc.c:601 parse_dmc_fw() warn:
unsigned 'fw->size - offset' is never less than zero
Firmware size is size_t and offset is u32. So the subtraction is
unsigned which can never be less than zero.
Fixes: 3d5928a168a9 ("drm/i915/xelpd: Pipe A DMC plugging")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210044129.12422-1-harshit.m.mogalapalli@oracle.com
|
|
Bit 7 of the status register indicates that the chip is busy
doing a conversion. It does not indicate an alarm status.
Stop reporting it as alarm status bit.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Tests with a real chip and a closer look into the datasheet reveals
that the local and remote critical alarm status bits are swapped for
MAX6680/MAX6681.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Tests with a real chip and a closer look into the datasheet show that
MAX6654 does not support CRIT/THERM/OVERTEMP limits, so drop support
of the respective attributes for this chip.
Introduce LM90_HAVE_CRIT flag and use it to instantiate critical limit
attributes to solve the problem.
Cc: Josh Lehan <krellan@google.com>
Fixes: 229d495d8189 ("hwmon: (lm90) Add max6654 support to lm90 driver")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Commit b50aa49638c7 ("hwmon: (lm90) Prevent integer underflows of
temperature calculations") addressed a number of underflow situations
when writing temperature limits. However, it missed one situation, seen
when an attempt is made to set the hysteresis value to MAX_LONG and the
critical temperature limit is negative.
Use clamp_val() when setting the hysteresis temperature to ensure that
the provided value can never overflow or underflow.
Fixes: b50aa49638c7 ("hwmon: (lm90) Prevent integer underflows of temperature calculations")
Cc: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The detect function had a comment "Make compiler happy" when id did not
read the second configuration register. As it turns out, the code was
checking the contents of this register for manufacturer ID 0xA1 (NXP
Semiconductor/Philips), but never actually read the register. So it
wasn't surprising that the compiler complained, and it indeed had a point.
Fix the code to read the register contents for manufacturer ID 0xa1.
At the same time, the code was reading the register for manufacturer ID
0x41 (Analog Devices), but it was not using the results. In effect it was
just checking if reading the register returned an error. That doesn't
really add much if any value, so stop doing that.
Fixes: f90be42fb383 ("hwmon: (lm90) Refactor reading of config2 register")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.16-rc5. They include:
- gadget driver fixes for reported issues
- xhci fixes for reported problems.
- config endpoint parsing fixes for where we got bitfields wrong
Most of these have been in linux-next, the remaining few were not, but
got lots of local testing in my systems and in some cloud testing
infrastructures"
* tag 'usb-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: core: config: using bit mask instead of individual bits
usb: core: config: fix validation of wMaxPacketValue entries
USB: gadget: zero allocate endpoint 0 buffers
USB: gadget: detect too-big endpoint 0 requests
xhci: avoid race between disable slot command and host runtime suspend
xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspending
Revert "usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a bunch of small char/misc and other driver subsystem fixes.
Included in here are:
- iio driver fixes for reported problems
- phy driver fixes for a number of reported problems
- mhi resume bugfix for broken hardware
- nvmem driver fix
- rtsx driver fix for irq issues
- fastrpc packet parsing fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits)
bus: mhi: core: Add support for forced PM resume
iio: trigger: stm32-timer: fix MODULE_ALIAS
misc: rtsx: Avoid mangling IRQ during runtime PM
nvmem: eeprom: at25: fix FRAM byte_len
misc: fastrpc: fix improper packet size calculation
MAINTAINERS: add maintainer for Qualcomm FastRPC driver
bus: mhi: pci_generic: Fix device recovery failed issue
iio: adc: stm32: fix null pointer on defer_probe error
phy: HiSilicon: Fix copy and paste bug in error handling
dt-bindings: phy: zynqmp-psgtr: fix USB phy name
phy: ti: omap-usb2: Fix the kernel-doc style
phy: qualcomm: ipq806x-usb: Fix kernel-doc style
iio: at91-sama5d2: Fix incorrect sign extension
iio: adc: axp20x_adc: fix charging current reporting on AXP22x
iio: gyro: adxrs290: fix data signedness
phy: ti: tusb1210: Fix the kernel-doc warn
phy: qualcomm: usb-hsic: Fix the kernel-doc warn
phy: qualcomm: qmp: Add missing struct documentation
phy: mvebu-cp110-utmi: Fix kernel-doc warns
iio: ad7768-1: Call iio_trigger_notify_done() on error
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two fixes for clock chip drivers:
- A regression fix for the Designware APB timer. A recent change to
the error checking code transformed the error condition wrongly so
it turned into a fail if good condition.
- Fix a clang build fail of the ARM architected timer driver"
* tag 'timers-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/arm_arch_timer: Force inlining of erratum_set_next_event_generic()
clocksource/drivers/dw_apb_timer_of: Fix probe failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of interrupt chip driver fixes:
- Fix the multi vector MSI allocation on Armada 370XP
- Do interrupt acknowledgement correctly in the aspeed-scu driver
- Make the IPR register offset correct in the NVIC driver
- Make redistribution table flushing correct by issueing a SYNC
command to ensure that the invalidation command has been executed
- Plug a device tree node reference leak in the bcm7210-l2 driver
- Trivial fixes in the MIPS GIC and the Apple AIC drivers"
* tag 'irq-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-bcm7120-l2: Add put_device() after of_find_device_by_node()
irqchip/irq-gic-v3-its.c: Force synchronisation when issuing INVALL
irqchip/apple-aic: Mark aic_init_smp() as __init
irqchip: nvic: Fix offset for Interrupt Priority Offsets
irqchip/mips-gic: Use bitfield helpers
irqchip/aspeed-scu: Replace update_bits with write_bits.
irqchip/armada-370-xp: Fix support for Multi-MSI interrupts
irqchip/armada-370-xp: Fix return value of armada_370_xp_msi_alloc()
|
|
When multiple threads concurrently access the debugfs content, data
and pointer exceptions may occur. Therefore, mutex lock protection is
added for debugfs.
Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the hns3_remove function firstly uninstall client instance,
and then uninstall acceletion engine device. The netdevice is freed in
client instance uninstall process, but acceletion engine device uninstall
process still use it to trace runtime information. This causes a use after
free problem.
So fixes it by check the instance register state to avoid use after free.
Fixes: d8355240cf8f ("net: hns3: add trace event support for PF/VF mailbox")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Using standard USB_EP_MAXP_MULT_MASK instead of individual bits for
extracting multiple-transactions bits from wMaxPacketSize value.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20211210085219.16796-2-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The checks performed by commit aed9d65ac327 ("USB: validate
wMaxPacketValue entries in endpoint descriptors") require that initial
value of the maxp variable contains both maximum packet size bits
(10..0) and multiple-transactions bits (12..11). However, the existing
code assings only the maximum packet size bits. This patch assigns all
bits of wMaxPacketSize to the variable.
Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors")
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20211210085219.16796-1-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Under some conditions, USB gadget devices can show allocated buffer
contents to a host. Fix this up by zero-allocating them so that any
extra data will all just be zeros.
Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Tested-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
