summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-01-26hwmon: (pmbus/mp2975) Fix driver initialization for MP2975 deviceKonstantin Aladyshev
The commit 1feb31e810b0 ("hwmon: (pmbus/mp2975) Simplify VOUT code") has introduced a bug that makes it impossible to initialize MP2975 device: """ mp2975 5-0020: Failed to identify chip capabilities i2c i2c-5: new_device: Instantiated device mp2975 at 0x20 i2c i2c-5: delete_device: Deleting device mp2975 at 0x20 """ Since the 'read_byte_data' function was removed from the 'pmbus_driver_info ' structure the driver no longer reports correctly that VOUT mode is direct. Therefore 'pmbus_identify_common' fails with error, making it impossible to initialize the device. Restore 'read_byte_data' function to fix the issue. Tested: - before: it is not possible to initialize MP2975 device with the 'mp2975' driver, - after: 'mp2975' correctly initializes MP2975 device and all sensor data is correct. Fixes: 1feb31e810b0 ("hwmon: (pmbus/mp2975) Simplify VOUT code") Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Link: https://lore.kernel.org/r/20240126205714.2363-1-aladyshev22@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-26Merge tag 'spi-fix-v6.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "As well as a few device IDs and the usual scattering of driver specific fixes this contains a couple of core things. One is a missed case in error handling, the other patch is a change from me raising the number of chip selects allowed by the newly added multi chip select support patches to resolve problems seen on several systems that exceeded the limit. This is not a real solution to the issue but rather just a change to avoid disruption to users, one of the options I am considering is just sending a revert of those changes if we can't come up with something sensible" * tag 'spi-fix-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fix finalize message on error return spi: cs42l43: Handle error from devm_pm_runtime_enable spi: Raise limit on number of chip selects spi: hisi-sfc-v3xx: Return IRQ_NONE if no interrupts were detected spi: spi-cadence: Reverse the order of interleaved write and read operations spi: spi-imx: Use dev_err_probe for failed DMA channel requests spi: bcm-qspi: fix SFDP BFPT read by usig mspi read spi: intel-pci: Add support for Arrow Lake SPI serial flash spi: intel-pci: Remove Meteor Lake-S SoC PCI ID from the list
2024-01-26Merge tag 'gpio-fixes-for-v6.8-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - add a quirk to GPIO ACPI handling to ignore touchpad wakeups on GPD G1619-04 - clear interrupt status bits (that may have been set before enabling the interrupts) after setting the interrupt type in gpio-eic-sprd * tag 'gpio-fixes-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: eic-sprd: Clear interrupt after set the interrupt type gpiolib: acpi: Ignore touchpad wakeup on GPD G1619-04
2024-01-26Merge tag 'media/v6.8-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - remove K3 DT prefix from wave5 - vb2 core: fix missing caps on VIDIO_CREATE_BUFS under certain circumstances - videobuf2: Stop direct calls to queue num_buffers field * tag 'media/v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: vb2: refactor setting flags and caps, fix missing cap media: media videobuf2: Stop direct calls to queue num_buffers field media: chips-media: wave5: Remove K3 References dt-bindings: media: Remove K3 Family Prefix from Compatible
2024-01-26platform/x86: touchscreen_dmi: Add info for the TECLAST X16 Plus tabletPhoenix Chen
Add touch screen info for TECLAST X16 Plus tablet. Signed-off-by: Phoenix Chen <asbeltogf@gmail.com> Link: https://lore.kernel.org/r/20240126095308.5042-1-asbeltogf@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-01-26platform/x86/intel/ifs: Call release_firmware() when handling errors.Jithu Joseph
Missing release_firmware() due to error handling blocked any future image loading. Fix the return code and release_fiwmare() to release the bad image. Fixes: 25a76dbb36dd ("platform/x86/intel/ifs: Validate image size") Reported-by: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Jithu Joseph <jithu.joseph@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240125082254.424859-2-ashok.raj@intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-01-26platform/x86/amd/pmf: Fix memory leak in amd_pmf_get_pb_data()Cong Liu
amd_pmf_get_pb_data() will allocate memory for the policy buffer, but does not free it if copy_from_user() fails. This leads to a memory leak. Fixes: 10817f28e533 ("platform/x86/amd/pmf: Add capability to sideload of policy binary") Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Cong Liu <liucong2@kylinos.cn> Link: https://lore.kernel.org/r/20240124012939.6550-1-liucong2@kylinos.cn Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-01-26platform/x86/amd/pmf: Get ambient light information from AMD SFH driverShyam Sundar S K
AMD SFH driver has APIs defined to export the ambient light information; use this within the PMF driver to send inputs to the PMF TA, so that PMF driver can enact to the actions coming from the TA. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240123141458.3715211-2-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-01-26platform/x86/amd/pmf: Get Human presence information from AMD SFH driverShyam Sundar S K
AMD SFH driver has APIs defined to export the human presence information; use this within the PMF driver to send inputs to the PMF TA, so that PMF driver can enact to the actions coming from the TA. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240123141458.3715211-1-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-01-26hwmon: gigabyte_waterforce: Fix locking bug in waterforce_get_status()Harshit Mogalapalli
Goto 'unlock_and_return' for unlocking before returning on the error path. Fixes: d5939a793693 ("hwmon: Add driver for Gigabyte AORUS Waterforce AIO coolers") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20240122154952.2851934-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-27Merge tag 'drm-misc-fixes-for-v6.8-rc2' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes One regression fixup to samsung-dsim.c module - The FORCE_STOP_STATE bit is ineffective for forcing DSI link into LP-11 mode, causing timing issues and potential bridge failures. This patch reverts previous commits and corrects this issue. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240126141130.15512-1-inki.dae@samsung.com
2024-01-27Revert "nouveau: push event block/allowing out of the fence context"Dave Airlie
This reverts commit eacabb5462717a52fccbbbba458365a4f5e61f35. This commit causes some regressions in desktop usage, this will reintroduce the original deadlock in DRI_PRIME situations, I've got an idea to fix it by offloading to a workqueue in a different spot, however this code has a race condition where we sometimes miss interrupts so I'd like to fix that as well. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-01-27Merge tag 'drm-intel-fixes-2024-01-26' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - PSR fix for HSW Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZbPGBL9lj4DxxIW1@jlahtine-mobl.ger.corp.intel.com
2024-01-27Merge tag 'drm-misc-fixes-2024-01-26' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Plenty of ivpu fixes to improve the general stability and debugging, a suspend fix for the anx7625 bridge, a revert to fix an initialization order bug between i915 and simpledrm and a documentation warning fix for dp_mst. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/tp77e5fokigup6cgmpq6mtg46kzdw2dpze6smpnwfoml4kmwpq@bo6mbkezpkle
2024-01-26HID: i2c-hid-of: fix NULL-deref on failed power upJohan Hovold
A while back the I2C HID implementation was split in an ACPI and OF part, but the new OF driver never initialises the client pointer which is dereferenced on power-up failures. Fixes: b33752c30023 ("HID: i2c-hid: Reorganize so ACPI and OF are separate modules") Cc: stable@vger.kernel.org # 5.12 Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-01-26nvmet-tcp: fix nvme tcp ida memory leakGuixin Liu
The nvmet_tcp_queue_ida should be destroy when the nvmet-tcp module exit. Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-01-26drm: bridge: samsung-dsim: Don't use FORCE_STOP_STATEMichael Walle
The FORCE_STOP_STATE bit is unsuitable to force the DSI link into LP-11 mode. It seems the bridge internally queues DSI packets and when the FORCE_STOP_STATE bit is cleared, they are sent in close succession without any useful timing (this also means that the DSI lanes won't go into LP-11 mode). The length of this gibberish varies between 1ms and 5ms. This sometimes breaks an attached bridge (TI SN65DSI84 in this case). In our case, the bridge will fail in about 1 per 500 reboots. The FORCE_STOP_STATE handling was introduced to have the DSI lanes in LP-11 state during the .pre_enable phase. But as it turns out, none of this is needed at all. Between samsung_dsim_init() and samsung_dsim_set_display_enable() the lanes are already in LP-11 mode. The code as it was before commit 20c827683de0 ("drm: bridge: samsung-dsim: Fix init during host transfer") and 0c14d3130654 ("drm: bridge: samsung-dsim: Fix i.MX8M enable flow to meet spec") was correct in this regard. This patch basically reverts both commits. It was tested on an i.MX8M SoC with an SN65DSI84 bridge. The signals were probed and the DSI packets were decoded during initialization and link start-up. After this patch the first DSI packet on the link is a VSYNC packet and the timing is correct. Command mode between .pre_enable and .enable was also briefly tested by a quick hack. There was no DSI link partner which would have responded, but it was made sure the DSI packet was send on the link. As a side note, the command mode seems to just work in HS mode. I couldn't find that the bridge will handle commands in LP mode. Fixes: 20c827683de0 ("drm: bridge: samsung-dsim: Fix init during host transfer") Fixes: 0c14d3130654 ("drm: bridge: samsung-dsim: Fix i.MX8M enable flow to meet spec") Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231113164344.1612602-1-mwalle@kernel.org
2024-01-26crypto: caam - fix asynchronous hashGaurav Jain
ahash_alg->setkey is updated to ahash_nosetkey in ahash.c so checking setkey() function to determine hmac algorithm is not valid. to fix this added is_hmac variable in structure caam_hash_alg to determine whether the algorithm is hmac or not. Fixes: 2f1f34c1bf7b ("crypto: ahash - optimize performance when wrapping shash") Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26crypto: qat - fix arbiter mapping generation algorithm for QAT 402xxDamian Muszynski
The commit "crypto: qat - generate dynamically arbiter mappings" introduced a regression on qat_402xx devices. This is reported when the driver probes the device, as indicated by the following error messages: 4xxx 0000:0b:00.0: enabling device (0140 -> 0142) 4xxx 0000:0b:00.0: Generate of the thread to arbiter map failed 4xxx 0000:0b:00.0: Direct firmware load for qat_402xx_mmp.bin failed with error -2 The root cause of this issue was the omission of a necessary function pointer required by the mapping algorithm during the implementation. Fix it by adding the missing function pointer. Fixes: 5da6a2d5353e ("crypto: qat - generate dynamically arbiter mappings") Signed-off-by: Damian Muszynski <damian.muszynski@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-01-26drm/sched: Drain all entities in DRM sched run job workerMatthew Brost
All entities must be drained in the DRM scheduler run job worker to avoid the following case. An entity found that is ready, no job found ready on entity, and run job worker goes idle with other entities + jobs ready. Draining all ready entities (i.e. loop over all ready entities) in the run job worker ensures all job that are ready will be scheduled. Cc: Thorsten Leemhuis <regressions@leemhuis.info> Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Closes: https://lore.kernel.org/all/CABXGCsM2VLs489CH-vF-1539-s3in37=bwuOWtoeeE+q26zE+Q@mail.gmail.com/ Reported-and-tested-by: Mario Limonciello <mario.limonciello@amd.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3124 Link: https://lore.kernel.org/all/20240123021155.2775-1-mario.limonciello@amd.com/ Reported-and-tested-by: Vlastimil Babka <vbabka@suse.cz> Closes: https://lore.kernel.org/dri-devel/05ddb2da-b182-4791-8ef7-82179fd159a8@amd.com/T/#m0c31d4d1b9ae9995bb880974c4f1dbaddc33a48a Signed-off-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240124210811.1639040-1-matthew.brost@intel.com
2024-01-26Merge tag 'amd-drm-fixes-6.8-2024-01-25' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.8-2024-01-25: amdgpu: - AC/DC power supply tracking fix - Don't show invalid vram vendor data - SMU 13.0.x fixes - GART fix for umr on systems without VRAM - GFX 10/11 UNORD_DISPATCH fixes - IPS display fixes (required for S0ix on some platforms) - Misc fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240125221503.5019-1-alexander.deucher@amd.com
2024-01-26Merge tag 'drm-xe-fixes-2024-01-25' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes Driver Changes: - Make an ops struct static - Fix an implicit 0 to NULL conversion - A couple of 32-bit fixes - A migration coherency fix for Lunar Lake. - An error path vm id leak fix - Remove PVC references in kunit tests Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZbIb7l0EhpVp5cXE@fedora
2024-01-25net: phy: mediatek-ge-soc: sync driver with MediaTek SDKDaniel Golle
Sync initialization and calibration routines with MediaTek's reference driver. Improves compliance and resolves link stability issues with CH340 IoT devices connected to MT798x built-in PHYs. Fixes: 98c485eaf509 ("net: phy: add driver for MediaTek SoC built-in GE PHYs") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/f2195279c234c0f618946424b8236026126bc595.1706071311.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25net: ethernet: mtk_eth_soc: set DMA coherent mask to get PPE workingDaniel Golle
Set DMA coherent mask to 32-bit which makes PPE offloading engine start working on BPi-R4 which got 4 GiB of RAM. Fixes: 2d75891ebc09 ("net: ethernet: mtk_eth_soc: support 36-bit DMA addressing on MT7988") Suggested-by: Elad Yifee <eladwf@users.github.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/97e90925368b405f0974b9b15f1b7377c4a329ad.1706113251.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25nfp: flower: fix hardware offload for the transfer layer portHui Zhou
The nfp driver will merge the tp source port and tp destination port into one dword which the offset must be zero to do hardware offload. However, the mangle action for the tp source port and tp destination port is separated for tc ct action. Modify the mangle action for the FLOW_ACT_MANGLE_HDR_TYPE_TCP and FLOW_ACT_MANGLE_HDR_TYPE_UDP to satisfy the nfp driver offload check for the tp port. The mangle action provides a 4B value for source, and a 4B value for the destination, but only 2B of each contains the useful information. For offload the 2B of each is combined into a single 4B word. Since the incoming mask for the source is '0xFFFF<mask>' the shift-left will throw away the 0xFFFF part. When this gets combined together in the offload it will clear the destination field. Fix this by setting the lower bits back to 0xFFFF, effectively doing a rotate-left operation on the mask. Fixes: 5cee92c6f57a ("nfp: flower: support hw offload for ct nat action") CC: stable@vger.kernel.org # 6.1+ Signed-off-by: Hui Zhou <hui.zhou@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Link: https://lore.kernel.org/r/20240124151909.31603-3-louis.peens@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25nfp: flower: add hardware offload check for post ct entryHui Zhou
The nfp offload flow pay will not allocate a mask id when the out port is openvswitch internal port. This is because these flows are used to configure the pre_tun table and are never actually send to the firmware as an add-flow message. When a tc rule which action contains ct and the post ct entry's out port is openvswitch internal port, the merge offload flow pay with the wrong mask id of 0 will be send to the firmware. Actually, the nfp can not support hardware offload for this situation, so return EOPNOTSUPP. Fixes: bd0fe7f96a3c ("nfp: flower-ct: add zone table entry when handling pre/post_ct flows") CC: stable@vger.kernel.org # 5.14+ Signed-off-by: Hui Zhou <hui.zhou@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Link: https://lore.kernel.org/r/20240124151909.31603-2-louis.peens@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25gve: Fix skb truesize underestimationPraveen Kaligineedi
For a skb frag with a newly allocated copy page, the true size is incorrectly set to packet buffer size. It should be set to PAGE_SIZE instead. Fixes: 82fd151d38d9 ("gve: Reduce alloc and copy costs in the GQ rx path") Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Link: https://lore.kernel.org/r/20240124161025.1819836-1-pkaligineedi@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25Merge tag 'md-6.8-20240126' of ↵Jens Axboe
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-6.8 Pull MD fix from Song: "This change fixes a RCU warning." * tag 'md-6.8-20240126' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md: fix a suspicious RCU usage warning
2024-01-25spi: fix finalize message on error returnDavid Lechner
In __spi_pump_transfer_message(), the message was not finalized in the first error return as it is in the other error return paths. Not finalizing the message could cause anything waiting on the message to complete to hang forever. This adds the missing call to spi_finalize_current_message(). Fixes: ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync") Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://msgid.link/r/20240125205312.3458541-2-dlechner@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-01-25drm/amd/display: "Enable IPS by default"Roman Li
[Why] IPS was temporary disabled due to instability. It was fixed in dmub firmware and with: - "drm/amd/display: Add IPS checks before dcn register access" - "drm/amd/display: Disable ips before dc interrupt setting" [How] Enable IPS by default. Disable IPS if 0x800 bit set in amdgpu.dcdebugmask module params Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd: Add a DC debug mask for IPSRoman Li
For debugging IPS-related issues, expose a new debug mask that allows to disable IPS. Usage: amdgpu.dcdebugmask=0x800 Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Disable ips before dc interrupt settingRoman Li
[Why] While in IPS2 an access to dcn registers is not allowed. If interrupt results in dc call, we should disable IPS. [How] Safeguard register access in IPS2 by disabling idle optimization before calling dc interrupt setting api. Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Replay + IPS + ABM in Full Screen VPBChunTao Tso
[Why] Because ABM will wait VStart to start getting histogram data, it will cause we can't enter IPS while full screnn video playing. [How] Modify the panel refresh rate to the maximun multiple of current refresh rate. Reviewed-by: Dennis Chan <dennis.chan@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: ChunTao Tso <chuntao.tso@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Add IPS checks before dcn register accessRoman Li
[Why] With IPS enabled a system hangs once PSR is active. PSR active triggers transition to IPS2 state. While in IPS2 an access to dcn registers results in hard hang. Existing check doesn't cover for PSR sequence. [How] Safeguard register access by disabling idle optimization in atomic commit and crtc scanout. It will be re-enabled on next vblank. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Add Replay IPS register for DMUB command tableAlvin Lee
- Introduce a new Replay mode for DMUB version 0.0.199.0 Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Allow IPS2 during ReplayNicholas Kazlauskas
[Why & How] Add regkey to block video playback in IPS2 by default Allow idle optimizations in the same spot we allow Replay for video playback usecases. Avoid sending it when there's an external display connected by modifying the allow idle checks to check for active non-eDP screens. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu/gfx11: set UNORD_DISPATCH in compute MQDsAlex Deucher
This needs to be set to 1 to avoid a potential deadlock in the GC 10.x and newer. On GC 9.x and older, this needs to be set to 0. This can lead to hangs in some mixed graphics and compute workloads. Updated firmware is also required for AQL. Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amdgpu/gfx10: set UNORD_DISPATCH in compute MQDsAlex Deucher
This needs to be set to 1 to avoid a potential deadlock in the GC 10.x and newer. On GC 9.x and older, this needs to be set to 0. This can lead to hangs in some mixed graphics and compute workloads. Updated firmware is also required for AQL. Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amd/amdgpu: Assign GART pages to AMD device mappingTom St Denis
This allows kernel mapped pages like the PDB and PTB to be read via the iomem debugfs when there is no vram in the system. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.7.x
2024-01-25drm/amd/pm: Fetch current power limit from FWLijo Lazar
Power limit of SMUv13.0.6 SOCs can be updated by out-of-band ways. Fetch the limit from firmware instead of using cached values. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.7.x
2024-01-25drm/amdgpu: Fix null pointer dereferenceHawking Zhang
amdgpu_reg_state_sysfs_fini could be invoked at the time when asic_func is even not initialized, i.e., amdgpu_discovery_init fails for some reason. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amdgpu: Show vram vendor only if availableLijo Lazar
Ony if vram vendor info is available, show in sysfs. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.7.x
2024-01-25drm/amd/pm: update the power cap settingKenneth Feng
update the power cap setting for smu_v13.0.0/smu_v13.0.7 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2356 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amdgpu: Avoid fetching vram vendor informationLijo Lazar
For GFX 9.4.3 APUs, the current method of fetching vram vendor information is not reliable. Avoid fetching the information. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.7.x
2024-01-25drm/amdgpu/pm: Fix the power source flag errorMa Jun
The power source flag should be updated when [1] System receives an interrupt indicating that the power source has changed. [2] System resumes from suspend or runtime suspend Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amd/display: Fix uninitialized variable usage in core_link_ 'read_dpcd() ↵Srinivasan Shanmugam
& write_dpcd()' functions The 'status' variable in 'core_link_read_dpcd()' & 'core_link_write_dpcd()' was uninitialized. Thus, initializing 'status' variable to 'DC_ERROR_UNEXPECTED' by default. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:226 core_link_read_dpcd() error: uninitialized symbol 'status'. drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:248 core_link_write_dpcd() error: uninitialized symbol 'status'. Cc: stable@vger.kernel.org Cc: Jerry Zuo <jerry.zuo@amd.com> Cc: Jun Lei <Jun.Lei@amd.com> Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/pm: udpate smu v13.0.6 message permissionYang Wang
update smu v13.0.6 message to allow guest driver set gfx clock. Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25Merge tag 'net-6.8-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf, netfilter and WiFi. Jakub is doing a lot of work to include the self-tests in our CI, as a result a significant amount of self-tests related fixes is flowing in (and will likely continue in the next few weeks). Current release - regressions: - bpf: fix a kernel crash for the riscv 64 JIT - bnxt_en: fix memory leak in bnxt_hwrm_get_rings() - revert "net: macsec: use skb_ensure_writable_head_tail to expand the skb" Previous releases - regressions: - core: fix removing a namespace with conflicting altnames - tc/flower: fix chain template offload memory leak - tcp: - make sure init the accept_queue's spinlocks once - fix autocork on CPUs with weak memory model - udp: fix busy polling - mlx5e: - fix out-of-bound read in port timestamping - fix peer flow lists corruption - iwlwifi: fix a memory corruption Previous releases - always broken: - netfilter: - nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress basechain - nft_limit: reject configurations that cause integer overflow - bpf: fix bpf_xdp_adjust_tail() with XSK zero-copy mbuf, avoiding a NULL pointer dereference upon shrinking - llc: make llc_ui_sendmsg() more robust against bonding changes - smc: fix illegal rmb_desc access in SMC-D connection dump - dpll: fix pin dump crash for rebound module - bnxt_en: fix possible crash after creating sw mqprio TCs - hv_netvsc: calculate correct ring size when PAGE_SIZE is not 4kB Misc: - several self-tests fixes for better integration with the netdev CI - added several missing modules descriptions" * tag 'net-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits) tsnep: Fix XDP_RING_NEED_WAKEUP for empty fill ring tsnep: Remove FCS for XDP data path net: fec: fix the unhandled context fault from smmu selftests: bonding: do not test arp/ns target with mode balance-alb/tlb fjes: fix memleaks in fjes_hw_setup i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue i40e: set xdp_rxq_info::frag_size xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers ice: remove redundant xdp_rxq_info registration i40e: handle multi-buffer packets that are shrunk by xdp prog ice: work on pre-XDP prog frag count xsk: fix usage of multi-buffer BPF helpers for ZC XDP xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags xsk: recycle buffer in case Rx queue was full net: fill in MODULE_DESCRIPTION()s for rvu_mbox net: fill in MODULE_DESCRIPTION()s for litex net: fill in MODULE_DESCRIPTION()s for fsl_pq_mdio net: fill in MODULE_DESCRIPTION()s for fec ...
2024-01-25Merge tag 'ffa-fixes-6.8' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm FF-A fixes for v6.8 Quite a few fixes addressing issues around missing RW lock initialisation in ffa_setup_partitions(), missing check for xa_load() return value, use of xa_insert instead of xa_store to flag case of duplicate insertion. It also simplifies ffa_partitions_cleanup() with xa_for_each() and xa_erase() instead of xa_extract() and kfree(). Finally it includes fixes around handling of partitions setup failures during initialisation. * tag 'ffa-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_ffa: Handle partitions setup failures firmware: arm_ffa: Use xa_insert() and check for result firmware: arm_ffa: Simplify ffa_partitions_cleanup() firmware: arm_ffa: Check xa_load() return value firmware: arm_ffa: Add missing rwlock_init() for the driver partition firmware: arm_ffa: Add missing rwlock_init() in ffa_setup_partitions() Link: https://lore.kernel.org/r/20240122161652.3551159-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-01-25ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllersLennert Buytenhek
With one of the on-board ASM1061 AHCI controllers (1b21:0612) on an ASUSTeK Pro WS WRX80E-SAGE SE WIFI mainboard, a controller hang was observed that was immediately preceded by the following kernel messages: ahci 0000:28:00.0: Using 64-bit DMA addresses ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00000 flags=0x0000] ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00300 flags=0x0000] ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00380 flags=0x0000] ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00400 flags=0x0000] ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00680 flags=0x0000] ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00700 flags=0x0000] The first message is produced by code in drivers/iommu/dma-iommu.c which is accompanied by the following comment that seems to apply: /* * Try to use all the 32-bit PCI addresses first. The original SAC vs. * DAC reasoning loses relevance with PCIe, but enough hardware and * firmware bugs are still lurking out there that it's safest not to * venture into the 64-bit space until necessary. * * If your device goes wrong after seeing the notice then likely either * its driver is not setting DMA masks accurately, the hardware has * some inherent bug in handling >32-bit addresses, or not all the * expected address bits are wired up between the device and the IOMMU. */ Asking the ASM1061 on a discrete PCIe card to DMA from I/O virtual address 0xffffffff00000000 produces the following I/O page faults: vfio-pci 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0x7ff00000000 flags=0x0010] vfio-pci 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0x7ff00000500 flags=0x0010] Note that the upper 21 bits of the logged DMA address are zero. (When asking a different PCIe device in the same PCIe slot to DMA to the same I/O virtual address, we do see all the upper 32 bits of the DMA address as 1, so this is not an issue with the chipset or IOMMU configuration on the test system.) Also, hacking libahci to always set the upper 21 bits of all DMA addresses to 1 produces no discernible effect on the behavior of the ASM1061, and mkfs/mount/scrub/etc work as without this hack. This all strongly suggests that the ASM1061 has a 43 bit DMA address limit, and this commit therefore adds a quirk to deal with this limit. This issue probably applies to (some of) the other supported ASMedia parts as well, but we limit it to the PCI IDs known to refer to ASM1061 parts, as that's the only part we know for sure to be affected by this issue at this point. Link: https://lore.kernel.org/linux-ide/ZaZ2PIpEId-rl6jv@wantstofly.org/ Signed-off-by: Lennert Buytenhek <kernel@wantstofly.org> [cassel: drop date from error messages in commit log] Signed-off-by: Niklas Cassel <cassel@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-16 00:57:46 +0000