summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-04-29net: dsa: ksz: ksz8863_smi_probe: set proper return value for ksz_switch_alloc()Oleksij Rempel
ksz_switch_alloc() will return NULL only if allocation is failed. So, the proper return value is -ENOMEM. Fixes: 60a364760002 ("net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-29net: dsa: ksz: ksz8795_spi_probe: fix possible NULL pointer dereferenceOleksij Rempel
Fix possible NULL pointer dereference in case devm_kzalloc() failed to allocate memory Fixes: cc13e52c3a89 ("net: dsa: microchip: Add Microchip KSZ8863 SPI based driver support") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-29net: dsa: ksz: ksz8863_smi_probe: fix possible NULL pointer dereferenceOleksij Rempel
Fix possible NULL pointer dereference in case devm_kzalloc() failed to allocate memory. Fixes: 60a364760002 ("net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-29bnx2x: Remove redundant assignment to errYang Li
Variable 'err' is set to -EIO but this value is never read as it is overwritten with a new value later on, hence it is a redundant assignment and can be removed. Clean up the following clang-analyzer warning: drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1195:2: warning: Value stored to 'err' is never read [clang-analyzer-deadcode.DeadStores] Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-29net: macb: Remove redundant assignment to queueJiapeng Chong
Variable queue is set to bp->queues but these values is not used as it is overwritten later on, hence redundant assignment can be removed. Cleans up the following clang-analyzer warning: drivers/net/ethernet/cadence/macb_main.c:4919:21: warning: Value stored to 'queue' during its initialization is never read [clang-analyzer-deadcode.DeadStores]. drivers/net/ethernet/cadence/macb_main.c:4832:21: warning: Value stored to 'queue' during its initialization is never read [clang-analyzer-deadcode.DeadStores]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-29net: hns3: add check for HNS3_NIC_STATE_INITED in hns3_reset_notify_up_enet()Jian Shen
In some cases, the device is not initialized because reset failed. If another task calls hns3_reset_notify_up_enet() before reset retry, it will cause an error since uninitialized pointer access. So add check for HNS3_NIC_STATE_INITED before calling hns3_nic_net_open() in hns3_reset_notify_up_enet(). Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-29net: hns3: initialize the message content in hclge_get_link_mode()Yufeng Mo
The message sent to VF should be initialized, otherwise random value of some contents may cause improper processing by the target. So add a initialization to message in hclge_get_link_mode(). Fixes: 9194d18b0577 ("net: hns3: fix the problem that the supported port is empty") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-29net: hns3: fix incorrect configuration for igu_egu_hw_errYufeng Mo
According to the UM, the type and enable status of igu_egu_hw_err should be configured separately. Currently, the type field is incorrect when disable this error. So fix it by configuring these two fields separately. Fixes: bf1faf9415dd ("net: hns3: Add enable and process hw errors from IGU, EGU and NCSI") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-29rtc: sysfs: check features instead of opsAlexandre Belloni
Test RTC_FEATURE_ALARM instead of relying on .set_alarm to know whether alarms are available. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210429214403.2610952-1-alexandre.belloni@bootlin.com
2021-04-29rtc: omap: use rtc_write to access OMAP_RTC_OSC_REGDario Binacchi
The RTC_OSC_REG register is 32-bit, but the useful information is found in the 7 least significant bits (bits 7-31 are reserved). And in fact, as you can see from the code, all read accesses are 8-bit, as well as some writes. Let's make sure all writes are 8-bit. Moreover, in contexts where consecutive reads / writes after the busy check must take place within 15 us, it is better not to waste time on useless accesses. Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210425145924.23353-1-dariobin@libero.it
2021-04-29rtc: s5m: Remove reference to parent's device pdataKrzysztof Kozlowski
The S5M RTC driver does not use parent's device (sec-core PMIC driver) platform data so there is no need to check for it. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210420170244.13467-3-krzysztof.kozlowski@canonical.com
2021-04-29rtc: ds1307: Fix wday settings for rx8130Nobuhiro Iwamatsu
rx8130 wday specifies the bit position, not BCD. Fixes: ee0981be7704 ("rtc: ds1307: Add support for Epson RX8130CE") Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210420023917.1949066-1-nobuhiro1.iwamatsu@toshiba.co.jp
2021-04-29rtc: pcf8523: report oscillator failuresAlexandre Belloni
Report oscillator failures and invalid date/time on RTC_VL_READ. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210418002023.1000265-3-alexandre.belloni@bootlin.com
2021-04-29rtc: pcf8523: add alarm supportAlexandre Belloni
Alarm support requires unconditionally disabling clock out because it is using the int1 pin. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210418002023.1000265-2-alexandre.belloni@bootlin.com
2021-04-29rtc: pcf8523: remove useless defineAlexandre Belloni
Drop DRIVER_NAME as it is only used once Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210418002023.1000265-1-alexandre.belloni@bootlin.com
2021-04-29rtc: rtc_update_irq_enable: rework UIE emulationAlexandre Belloni
Now that the core is aware of whether alarms are available, it is possible to decide whether UIE emulation is required before actually trying to set the alarm. This greatly simplifies rtc_update_irq_enable because there is now only one error value to track and is not relying on the return value of __rtc_set_alarm anymore. Tested-by: Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210418000023.995758-3-alexandre.belloni@bootlin.com
2021-04-29rtc: ds1307: remove flagsAlexandre Belloni
flags is now unused, drop it. Tested-by: Łukasz Stelmach <l.stelmach@samsung.com> Reviewed-by: Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210418000023.995758-2-alexandre.belloni@bootlin.com
2021-04-29rtc: ds1307: replace HAS_ALARM by RTC_FEATURE_ALARMAlexandre Belloni
The core now has RTC_FEATURE_ALARM for the driver to indicate whether alarms are available. Use that instead of HAS_ALARM to ensure the alarm callbacks are not even called. Tested-by: Łukasz Stelmach <l.stelmach@samsung.com> Reviewed-by: Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210418000023.995758-1-alexandre.belloni@bootlin.com
2021-04-29rtc: imx-sc: remove .read_alarmAlexandre Belloni
The RTC core properly handles RTC without .read_alarm and doesn't use it to set alarms. .read_alarm can be safely dropped. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210417235205.994119-1-alexandre.belloni@bootlin.com
2021-04-29Merge branch 'for-5.13/warnings' into for-linusJiri Kosina
- plethora of fixes for valid gcc warnings from Lee Jones
2021-04-29Merge branch 'for-5.13/wacom' into for-linusJiri Kosina
- Wacom pen handling fix from Ping Cheng
2021-04-29Merge branch 'for-5.13/thrustmaster' into for-linusJiri Kosina
- support for initialization of some newer Thrustmaster wheels from Dario Pagani
2021-04-29Merge branch 'for-5.13/surface-system-aggregator-intergration' into for-linusJiri Kosina
- Surface Aggregator Module support from Maximilian Luz
2021-04-29Merge branch 'for-5.13/plantronics' into for-linusJiri Kosina
- Workaround for broken behavior of Plantronics Blackwire from Maxim Mikityanskiy
2021-04-29Merge branch 'for-5.13/magicmouse' into for-linusJiri Kosina
- Apple Magic Mouse 2 support from John Chen
2021-04-29Merge branch 'for-5.13/logitech' into for-linusJiri Kosina
- Support for newer Quad/BT 2.0 Logitech receivers in HID proxy mode from Hans de Goede
2021-04-29Merge branch 'for-5.13/lenovo' into for-linusJiri Kosina
- LED fixes and Thinkpad X1 Tablet keyboard support, from Hans de Goede
2021-04-29Merge branch 'for-5.13/i2c-hid' into for-linusJiri Kosina
- Cleanups to ACPI handling in i2c-hid driver from Andy Shevchenko
2021-04-29Merge branch 'for-5.13/ft260' into for-linusJiri Kosina
- Support for FTDI FT260 I2C host adapter from Michael Zaidman
2021-04-29Merge branch 'for-5.13/elan' into for-linusJiri Kosina
- Mute LED support fixes for Elantech driver from Hans de Goede
2021-04-29Merge branch 'for-5.13/core' into for-linusJiri Kosina
- hiddev_connect() return value fix from Jason Gerecke
2021-04-29Merge tag 'net-next-5.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...
2021-04-29Merge tag 'mips_5.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - removed get_fs/set_fs - removed broken/unmaintained MIPS KVM trap and emulate support - added support for Loongson-2K1000 - fixes and cleanups * tag 'mips_5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (107 commits) MIPS: BCM63XX: Use BUG_ON instead of condition followed by BUG. MIPS: select ARCH_KEEP_MEMBLOCK unconditionally mips: Do not include hi and lo in clobber list for R6 MIPS:DTS:Correct the license for Loongson-2K MIPS:DTS:Fix label name and interrupt number of ohci for Loongson-2K MIPS: Avoid handcoded DIVU in `__div64_32' altogether lib/math/test_div64: Correct the spelling of "dividend" lib/math/test_div64: Fix error message formatting mips/bootinfo:correct some comments of fw_arg MIPS: Avoid DIVU in `__div64_32' is result would be zero MIPS: Reinstate platform `__div64_32' handler div64: Correct inline documentation for `do_div' lib/math: Add a `do_div' test module MIPS: Makefile: Replace -pg with CC_FLAGS_FTRACE MIPS: pci-legacy: revert "use generic pci_enable_resources" MIPS: Loongson64: Add kexec/kdump support MIPS: pci-legacy: use generic pci_enable_resources MIPS: pci-legacy: remove busn_resource field MIPS: pci-legacy: remove redundant info messages MIPS: pci-legacy: stop using of_pci_range_to_resource ...
2021-04-29nitro_enclaves: Fix stale file descriptors on failed usercopyMathias Krause
A failing usercopy of the slot uid will lead to a stale entry in the file descriptor table as put_unused_fd() won't release it. This enables userland to refer to a dangling 'file' object through that still valid file descriptor, leading to all kinds of use-after-free exploitation scenarios. Exchanging put_unused_fd() for close_fd(), ksys_close() or alike won't solve the underlying issue, as the file descriptor might have been replaced in the meantime, e.g. via userland calling close() on it (leading to a NULL pointer dereference in the error handling code as 'fget(enclave_fd)' will return a NULL pointer) or by dup2()'ing a completely different file object to that very file descriptor, leading to the same situation: a dangling file descriptor pointing to a freed object -- just in this case to a file object of user's choosing. Generally speaking, after the call to fd_install() the file descriptor is live and userland is free to do whatever with it. We cannot rely on it to still refer to our enclave object afterwards. In fact, by abusing userfaultfd() userland can hit the condition without any racing and abuse the error handling in the nitro code as it pleases. To fix the above issues, defer the call to fd_install() until all possible errors are handled. In this case it's just the usercopy, so do it directly in ne_create_vm_ioctl() itself. Signed-off-by: Mathias Krause <minipli@grsecurity.net> Signed-off-by: Andra Paraschiv <andraprs@amazon.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210429165941.27020-2-andraprs@amazon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-29PCI: mediatek-gen3: Add system PM supportJianjun Wang
Add suspend_noirq and resume_noirq callback functions to implement PM system suspend and resume hooks for the MediaTek Gen3 PCIe controller. When the system suspends, trigger the PCIe link to enter the L2 state and pull down the PERST# pin, gating the clocks of the MAC layer, and then power-off the physical layer to provide power-saving. When the system resumes, the PCIe link should be re-established and the related control register values should be restored. Link: https://lore.kernel.org/r/20210420061723.989-7-jianjun.wang@mediatek.com Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2021-04-29PCI: mediatek-gen3: Add MSI supportJianjun Wang
Add MSI support for MediaTek Gen3 PCIe controller. This PCIe controller supports up to 256 MSI vectors, the MSI hardware block diagram is as follows: +-----+ | GIC | +-----+ ^ | port->irq | +-+-+-+-+-+-+-+-+ |0|1|2|3|4|5|6|7| (PCIe intc) +-+-+-+-+-+-+-+-+ ^ ^ ^ | | ... | +-------+ +------+ +-----------+ | | | +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+ |0|1|...|30|31| |0|1|...|30|31| |0|1|...|30|31| (MSI sets) +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ | | | | | | | | | | | | (MSI vectors) | | | | | | | | | | | | (MSI SET0) (MSI SET1) ... (MSI SET7) With 256 MSI vectors supported, the MSI vectors are composed of 8 sets, each set has its own address for MSI message, and supports 32 MSI vectors to generate interrupt. Link: https://lore.kernel.org/r/20210420061723.989-6-jianjun.wang@mediatek.com Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2021-04-29PCI: mediatek-gen3: Add INTx supportJianjun Wang
Add INTx support for MediaTek Gen3 PCIe controller. Link: https://lore.kernel.org/r/20210420061723.989-5-jianjun.wang@mediatek.com Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2021-04-29PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192Jianjun Wang
MediaTek's PCIe host controller has three generation HWs, the new generation HW is an individual bridge, it supports Gen3 speed and compatible with Gen2, Gen1 speed. Add support for new Gen3 controller which can be found on MT8192. Link: https://lore.kernel.org/r/20210420061723.989-4-jianjun.wang@mediatek.com Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2021-04-29PCI: dwc: Move iATU detection earlierHou Zhiqiang
dw_pcie_ep_init() depends on the detected iATU region numbers to allocate the in/outbound window management bitmap. It fails after 281f1f99cf3a ("PCI: dwc: Detect number of iATU windows"). Move the iATU region detection into a new function, move the detection to the very beginning of dw_pcie_host_init() and dw_pcie_ep_init(). Also remove it from the dw_pcie_setup(), since it's more like a software initialization step than hardware setup. Link: https://lore.kernel.org/r/20210125044803.4310-1-Zhiqiang.Hou@nxp.com Link: https://lore.kernel.org/linux-pci/20210407131255.702054-1-dmitry.baryshkov@linaro.org Link: https://lore.kernel.org/r/20210413142219.2301430-1-dmitry.baryshkov@linaro.org Fixes: 281f1f99cf3a ("PCI: dwc: Detect number of iATU windows") Tested-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [DB: moved dw_pcie_iatu_detect to happen after host_init callback] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: stable@vger.kernel.org # v5.11+ Cc: Marek Szyprowski <m.szyprowski@samsung.com>
2021-04-29PCI: dwc/intel-gw: Remove unused functionJiapeng Chong
Fix the following clang warning: drivers/pci/controller/dwc/pcie-intel-gw.c:84:19: warning: unused function 'pcie_app_rd' [-Wunused-function]. Link: https://lore.kernel.org/r/1618475577-99198-1-git-send-email-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-04-29PCI: dwc: Move dw_pcie_msi_init() to dw_pcie_setup_rc()Jisheng Zhang
If the host which makes use of IP's integrated MSI Receiver losts power during suspend, we need to reinit the RC and MSI Receiver in resume. But after we move dw_pcie_msi_init() into the core, we have no API to do so. Usually the dwc users need to call dw_pcie_setup_rc() to reinit the RC, we can solve this problem by moving dw_pcie_msi_init() to dw_pcie_setup_rc(). Link: https://lore.kernel.org/r/20210325152604.6e79deba@xhacker.debian Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2021-04-29PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functionsKrzysztof Wilczyński
The sysfs_emit() and sysfs_emit_at() functions were introduced to make it less ambiguous which function is preferred when writing to the output buffer in a device attribute's "show" callback [1]. Convert the PCI sysfs object "show" functions from sprintf(), snprintf() and scnprintf() to sysfs_emit() and sysfs_emit_at() accordingly, as the latter is aware of the PAGE_SIZE buffer and correctly returns the number of bytes written into the buffer. No functional change intended. [1] Documentation/filesystems/sysfs.rst [bhelgaas: drop dsm_label_utf16s_to_utf8s(), link speed/width changes] Link: https://lore.kernel.org/r/20210416205856.3234481-10-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-29PCI/sysfs: Rearrange smbios_attr_group and acpi_attr_groupKrzysztof Wilczyński
Collect the smbios_attr_group and acpi_attr_group together in the logical order. No functional change intended. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20210416205856.3234481-6-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-29PCI/sysfs: Tidy SMBIOS & ACPI label attributesKrzysztof Wilczyński
Update coding style to reduce distraction. No functional change intended. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20210416205856.3234481-6-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-29PCI/sysfs: Convert "index", "acpi_index", "label" to static attributesKrzysztof Wilczyński
The "label", "index", and "acpi_index" sysfs attributes show firmware label information about the device. If the ACPI Device Name _DSM is implemented for the device, we have: label Device name (optional, may be null) acpi_index Instance number (unique under \_SB scope) When there is no ACPI _DSM and SMBIOS provides an Onboard Devices structure for the device, we have: label Reference Designation, e.g., a silkscreen label index Device Type Instance Previously these attributes were dynamically created either by pci_bus_add_device() or the pci_sysfs_init() initcall, but since they don't need to be created or removed dynamically, we can use a static attribute so the device model takes care of addition and removal automatically. Convert "label", "index", and "acpi_index" to static attributes. Presence of the ACPI _DSM (device_has_acpi_name()) determines whether the ACPI information (label, acpi_index) or the SMBIOS information (label, index) is visible. [bhelgaas: commit log, split to separate patch, add "pci_dev_" prefix] Suggested-by: Oliver O'Halloran <oohall@gmail.com> Link: https://lore.kernel.org/r/20210416205856.3234481-6-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-29PCI/sysfs: Define SMBIOS label attributes with DEVICE_ATTR*()Krzysztof Wilczyński
Use DEVICE_ATTR*() to simplify definition of the SMBIOS label attributes. No functional change intended. Note that dev_attr_smbios_label requires __ATTR() because the "label" attribute can be exposed via either ACPI or SMBIOS, and we already have the ACPI label_show() function in this file. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20210416205856.3234481-6-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-29PCI/sysfs: Define ACPI label attributes with DEVICE_ATTR*()Krzysztof Wilczyński
Use DEVICE_ATTR*() to simplify definitions of the ACPI label attributes. No functional change intended. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20210416205856.3234481-6-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-29PCI/sysfs: Rename device_has_dsm() to device_has_acpi_name()Krzysztof Wilczyński
Rename device_has_dsm() to device_has_acpi_name() to better reflect its purpose and move it earlier so it's available for a future SMBIOS .is_visible() function. No functional change intended. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20210416205856.3234481-6-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-29PCI/sysfs: Convert "vpd" to static attributeKrzysztof Wilczyński
The "vpd" sysfs attribute allows access to Vital Product Data (VPD). Previously it was dynamically created either by pci_bus_add_device() or the pci_sysfs_init() initcall, but since it doesn't need to be created or removed dynamically, we can use a static attribute so the device model takes care of addition and removal automatically. Convert "vpd" to a static attribute and use the .is_bin_visible() callback to check whether the device supports VPD. Remove pcie_vpd_create_sysfs_dev_files(), pcie_vpd_remove_sysfs_dev_files(), pci_create_capabilities_sysfs(), and pci_create_capabilities_sysfs(), which are no longer needed. [bhelgaas: This is substantially the same as the earlier patch from Heiner Kallweit <hkallweit1@gmail.com>. I included Krzysztof's change here so all the "convert to static attribute" changes are together.] [bhelgaas: rename to vpd_read()/vpd_write() and pci_dev_vpd_attr_group] Suggested-by: Oliver O'Halloran <oohall@gmail.com> Based-on: https://lore.kernel.org/r/7703024f-8882-9eec-a122-599871728a89@gmail.com Based-on-patch-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20210416205856.3234481-5-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-29PCI/sysfs: Rename "vpd" attribute accessorsBjorn Helgaas
Rename "vpd" attribute accessors so they fit with the BIN_ATTR_RW() macro usage. Currently there is no BIN_ATTR_ADMIN_RW() that uses 0600 permissions, but if there were, it would likely use "vpd_read()" and "vpd_write()". No functional change intended. Extracted from the patch mentioned below by Heiner Kallweit <hkallweit1@gmail.com>. Link: https://lore.kernel.org/linux-pci/7703024f-8882-9eec-a122-599871728a89@gmail.com/ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit (git 2.34.1) at 2025-09-16 04:35:28 +0000