| Age | Commit message (Collapse) | Author |
|---|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.2:
UAPI Changes:
- Document which feature flags belong to which command in virtio_gpu.h
- Make the FB_DAMAGE_CLIPS available for atomic userspace only, it's useless for legacy.
Cross-subsystem Changes:
- Add device tree bindings for lg,acx467akm-7 panel and ST-Ericsson Multi Channel Display Engine MCDE
- Add parameters to the device tree bindings for tfp410
- iommu/io-pgtable: Add ARM Mali midgard MMU page table format
- dma-buf: Only do a 64-bits seqno compare when driver explicitly asks for it, else wraparound.
- Use the 64-bits compare for dma-fence-chains
Core Changes:
- Make the fb conversion functions use __iomem dst.
- Rename drm_client_add to drm_client_register
- Move intel_fb_initial_config to core.
- Add a drm_gem_objects_lookup helper
- Add drm_gem_fence_array helpers, and use it in lima.
- Add drm_format_helper.c to kerneldoc.
Driver Changes:
- Add panfrost driver for mali midgard/bitfrost.
- Converts bochs to use the simple display type.
- Small fixes to sun4i, tinydrm, ti-fp410.
- Fid aspeed's Kconfig options.
- Make some symbols/functions static in lima, sun4i and meson.
- Add a driver for the lg,acx467akm-7 panel.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/737ad994-213d-45b5-207a-b99d795acd21@linux.intel.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- uAPI "Fixes:" patch for the upcoming kernel 5.1, included here too
We have an Ack from the media folks (only current user) for this
late tweak
Cross-subsystem Changes:
- ALSA: hda: Fix racy display power access (Takashi, Chris)
Driver Changes:
- DDI and MIPI-DSI clocks fixes for Icelake (Vandita)
- Fix Icelake frequency change/locking (RPS) (Mika)
- Temporarily disable ppGTT read-only bit on Icelake (Mika)
- Add missing Icelake W/As (Mika)
- Enable 12 deep CSB status FIFO on Icelake (Mika)
- Inherit more Icelake code for Elkhartlake (Bob, Jani)
- Handle catastrophic error on engine reset (Mika)
- Shortcut readiness to reset check (Mika)
- Regression fix for GEM_BUSY causing us to report a mixed uabi-class request as not busy (Chris)
- Revert back to max link rate and lane count on eDP (Jani)
- Fix pipe BPP readout for BXT/GLK DSI (Ville)
- Set DP min_bpp to 8*3 for non-RGB output formats (Ville)
- Enable coarse preemption boundaries for Gen8 (Chris)
- Do not enable FEC without DSC (Ville)
- Restore correct BXT DDI latency optim setting calculation (Ville)
- Always reset context's RING registers to avoid running workload twice during reset (Chris)
- Set GPU wedged on driver unload (Janusz)
- Consolidate two similar barries from timeline into one (Chris)
- Only reset the pinned kernel contexts on resume (Chris)
- Wakeref tracking improvements (Chris, Imre)
- Lockdep fixes for shrinker interactions (Chris)
- Bump ready tasks ahead of busywaits in prep of semaphore use (Chris)
- Huge step in splitting display code into fine grained files (Jani)
- Refactor the IRQ init/reset macros for code saving (Paulo)
- Convert IRQ initialization code to uncore MMIO access (Paulo)
- Convert workarounds code to use uncore MMIO access (Chris)
- Nuke drm_crtc_state and use intel_atomic_state instead (Manasi)
- Update SKL clock-gating WA (Radhakrishna, Ville)
- Isolate GuC reset code flow (Chris)
- Expose force_dsc_enable through debugfs (Manasi)
- Header standalone compile testing framework (Jani)
- Code cleanups to reduce driver footprint (Chris)
- PSR code fixes and cleanups (Jose)
- Sparse and kerneldoc updates (Chris)
- Suppress spurious combo PHY B warning (Vile)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190418080426.GA6409@jlahtine-desk.ger.corp.intel.com
|
|
into drm-next
Resource dirtying improvement by Thomas,
user-space error logging improvement and
some other minor fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Deepak Rawat <drawat@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190423211630.61874-1-drawat@vmware.com
|
|
Add ACX467AKM-7 4.95" 1080×1920 LCD panel that is found on the LG Nexus
5 (hammerhead) phone.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
[masneyb@onstation.org: checkpatch fixes; rename jdi,1080p-hammerhead
binding to lg,acx467akm-7.]
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181124200628.24393-2-masneyb@onstation.org
|
|
This reverts commit 8059add0478e29cb641936011a8fcc9ce9fd80be.
This commit while seemingly a good idea, breaks a radv check,
for a node being master because something succeeds where it failed
before now.
Apply the Linus rule, revert early and try again, we don't break
userspace.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Commit f06ddb53096b ("BackMerge v5.1-rc5 into drm-next") incorrectly
resolved a merge conflict related to a patch having been merged twice:
- commit 3f04e0a6cfeb ("drm: Fix drm_release() and device unplug")
introduced as a standalone fix via drm-fixes branch,
- commit 1ee57d4d75fb ("drm: Fix drm_release() and device unplug")
applied as patch 1/2 of a series on drm-next branch.
That incorrect resolution of the conflict effectively reverted a change
introduced to drivers/gpu/drm/drm_drv.c by patch 2/2 of that series -
commit ba3bf37e150a ("drm/drv: drm_dev_unplug(): Move out drm_dev_put()
call"). Fix it.
Fixes: f06ddb53096b ("BackMerge v5.1-rc5 into drm-next")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190417133232.16232-1-janusz.krzysztofik@linux.intel.com
|
|
The Amlogic SoCs Canvas buffers stride must be aligned on 64bytes
and overall size should be aligned on PAGE width.
Adds a custom dumb_create op to adds these requirements.
Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Suggested-by: Sky Zhou <sky.zhou@amlogic.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Sky Zhou <sky.zhou@amlogic.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190408090137.2402-1-narmstrong@baylibre.com
|
|
Fix sparse warnings:
drivers/gpu/drm/meson/meson_viu.c:93:6: warning: symbol 'meson_viu_set_g12a_osd1_matrix' was not declared. Should it be static?
drivers/gpu/drm/meson/meson_viu.c:121:6: warning: symbol 'meson_viu_set_osd_matrix' was not declared. Should it be static?
drivers/gpu/drm/meson/meson_viu.c:190:6: warning: symbol 'meson_viu_set_osd_lut' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190413141455.34020-1-yuehaibing@huawei.com
|
|
Fix sparse warnings:
drivers/gpu/drm/sun4i/sun8i_tcon_top.c:271:36: warning: symbol 'sun8i_r40_tcon_top_quirks' was not declared. Should it be static?
drivers/gpu/drm/sun4i/sun8i_tcon_top.c:276:36: warning: symbol 'sun50i_h6_tcon_top_quirks' was not declared. Should it be static?
drivers/gpu/drm/sun4i/sun4i_tcon.c:239:6: warning: symbol 'sun4i_tcon_set_mux' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416145855.20852-1-yuehaibing@huawei.com
|
|
Fix sparse warning:
drivers/gpu/drm/lima/lima_sched.c:356:36: warning:
symbol 'lima_sched_ops' was not declared. Should it be static?
Fixes: a1d2a6339961 ("drm/lima: driver for ARM Mali4xx GPUs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416144353.34024-1-yuehaibing@huawei.com
|
|
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The cdclk init/uninit code was changed by commit 93a643f29bcb
("drm/i915/cdclk: have only one init/uninit function") between the
versions of commit 39564ae86d51 ("drm/i915/ehl: Inherit Ice Lake
conditional code"). What got merged fails to do cdclk init/uninit on
ehl.
Fixes: 39564ae86d51 ("drm/i915/ehl: Inherit Ice Lake conditional code")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416082852.18141-1-jani.nikula@intel.com
|
|
Also drop the dstclip parameter sphinx has warned about (leftover from
an earlier patch version).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190416090533.28374-1-kraxel@redhat.com
|
|
SSEU reprogramming of the context introduced the notion of engine class
and instance for a forwards compatible method of describing any engine
beyond the old execbuf interface. We wish to adopt this class:instance
description for more interfaces, so pull it out into a separate type for
userspace convenience.
Fixes: e46c2e99f600 ("drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Cc: Andi Shyti <andi@etezian.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Tony Ye <tony.ye@intel.com>
Reviewed-by: Andi Shyti <andi@etezian.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412071416.30097-1-chris@chris-wilson.co.uk
|
|
It's a pretty direct port of what I did for v3d.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401222635.25013-8-eric@anholt.net
Reviewed-and-tested-by: Qiang Yu <yuq825@gmail.com>
|
|
I needed to add implicit dependency support for v3d, and Rob Herring
has been working on it for panfrost, and I had recently looked at the
lima implementation so I think this will be a good intersection of
what we all want and simplify our scheduler implementations.
v2: Rebase on xa_limit_32b API change, and tiny checkpatch cleanups on
the way in (unsigned int vs unsigned, extra return before
EXPORT_SYMBOL_GPL)
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401222635.25013-6-eric@anholt.net
Reviewed-and-tested-by: Qiang Yu <yuq825@gmail.com> (v1)
|
|
Plane property "FB_DAMAGE_CLIPS" can only be used by atomic aware
user-space, so no point exposing it otherwise.
Cc: <stable@vger.kernel.org>
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: d3b21767821e ("drm: Add a new plane property to send damage during plane update")
Link: https://patchwork.freedesktop.org/patch/msgid/20190415172814.9840-1-drawat@vmware.com
|
|
Make them take the uncore argument from the caller instead of passing
the implicit &dev_priv->uncore directly. This will allow us to finally
pass something that's not dev_priv->uncore in the future, and gets rid
of the implicit variables in register macros.
v2: Rebase on top of the newer patches.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-6-paulo.r.zanoni@intel.com
|
|
The IRQ initialization helpers are simple and self-contained. Continue
the transition started in the recent uncore rework to get us rid of
I915_READ/WRITE and the implicit dev_priv variables.
While the implicit dev_priv is removed from the IRQ initialization
helpers, we didn't get rid of them in the macro callers. Doing that
should be very simple now.
v2: Rebase on top of the new patches.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-5-paulo.r.zanoni@intel.com
|
|
This discussion started because we use token pasting in the
GEN{2,3}_IRQ_INIT and GEN{2,3}_IRQ_RESET macros, so gen2-4 passes an
empty argument to those macros, making the code a little weird. The
original proposal was to just add a comment as the empty argument, but
Ville suggested we just add a prefix to the registers, and that indeed
sounds like a more elegant solution.
Now doing this is kinda against our rules for register naming since we
only add gens or platform names as register prefixes when the given
gen/platform changes a register that already existed before. On the
other hand, we have so many instances of IIR/IMR in comments that
adding a prefix would make the users of these register more easily
findable, in addition to make our token pasting macros actually
readable. So IMHO opening an exception here is worth it.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-4-paulo.r.zanoni@intel.com
|
|
Like the gen3+ macros, the gen2 versions of the IRQ initialization
macros take the register name in the 'type' argument. But gen2 only
has one set of registers, so there's really no need to specify the
type. This commit removes the type argument and uses the registers
directly instead of passing them through variables.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-3-paulo.r.zanoni@intel.com
|
|
The whole point of having macros here is for the token pasting
necessary to automatically have IMR, IIR and IER selected. We don't
really need or want all the inlining that happens as a consequence.
The good thing about the current code is that it works regardless of
the relative offsets between these registers (they change after gen4,
with the usual VLV/CHV exceptions).
One thing which we can do is to split the logic of what we do with
imr/ier/iir to functions separate from the macros that pick them.
That's what we do in this commit. This allows us to get rid of the
gen8 duplicates and also all the inlining:
add/remove: 2/0 grow/shrink: 0/21 up/down: 384/-5949 (-5565)
Function old new delta
gen3_irq_reset - 233 +233
gen3_irq_init - 151 +151
i8xx_irq_postinstall 459 442 -17
gen11_irq_postinstall 804 744 -60
ironlake_irq_postinstall 450 353 -97
vlv_display_irq_postinstall 348 245 -103
i965_irq_postinstall 378 272 -106
i915_irq_postinstall 333 227 -106
gen8_irq_power_well_post_enable 374 240 -134
ironlake_irq_reset 397 218 -179
vlv_display_irq_reset 616 433 -183
i965_irq_reset 374 180 -194
cherryview_irq_reset 379 185 -194
i915_irq_reset 407 209 -198
ibx_irq_reset 332 133 -199
gen5_gt_irq_postinstall 533 332 -201
gen8_irq_power_well_pre_disable 434 204 -230
gen8_gt_irq_postinstall 469 196 -273
gen8_de_irq_postinstall 1200 836 -364
gen5_gt_irq_reset 471 76 -395
gen8_gt_irq_reset 775 99 -676
gen8_irq_reset 1100 333 -767
gen11_irq_reset 1959 686 -1273
Total: Before=2259222, After=2253657, chg -0.25%
v2:
- Make checkpatch happy with a temporary which_ (Checkpatch).
- Reorder the arguments for the INIT macros (Ville).
- Correctly explain when the register offsets change in the commit
message (Ville).
- Use more line breaks in the macro calls to make the arguments look
a little more organized/readable.
- Update the bloat-o-meter output (minor change only).
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-2-paulo.r.zanoni@intel.com
|
|
The GFX IP is inside of the ASPEED BMC SoC so there is little use
enabling it on a kernel that does not support ASPEED.
When building with COMPILE_TEST the architecture many not have CMA
support, so to avoid breaking the build we only select these options if
the architecture supports the contiguous allocator.
I suspect the DRM_PANEL came from a cut/paste error.
Fixes: 4f2a8f5898ec ("drm: Add ASPEED GFX driver")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405081117.27339-1-joel@jms.id.au
|
|
drm-intel-next-queued
gvt-next-2019-04-16
- Refine range of MCHBAR snapshot (Yakui)
- Refine out-of-sync page struct (Yakui)
- Remove unused vGPU sreg (Yan)
- Refind MMIO reg names (Xiaolin)
- Proper handling of sync/async flip (Colin)
- Proper handling of PIPE_CONTROL/MI_FLUSH_DW index mode (Xiaolin)
- EXCC reg mask fix (Colin)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416084814.GH17995@zhen-hp.sh.intel.com
|
|
Instead of checking the upper values of the sequence number use an explicit
field in the dma_fence_ops structure to note if a sequence should be 32bit
or 64bit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/299655/
|
|
drivers/gpu/drm/i915/intel_pm.c:8352:9: error: incompatible types in comparison expression (different address spaces)
drivers/gpu/drm/i915/intel_pm.c:8359:9: error: incompatible types in comparison expression (different address spaces)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412085410.10392-3-chris@chris-wilson.co.uk
|
|
Since removal of the "missed interrupt detection" nobody used the result
of whether or not we signaled anybody during that invocation, so now
remove the return value.
References: 789659f4307a ("drm/i915: Drop fake breadcrumb irq")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416085218.431-1-chris@chris-wilson.co.uk
|
|
According to GFX PRM on 01.org, bit 31:16 of mmio 0x22028 should be masks.
Fixes: 178657139307 ("drm/i915/gvt: vGPU context switch")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
with the introduce of "switch to use HWS indices rather than address",
guest GPU hang observed when running workloads which will update the
seqno to the real HW HWSP, not vitural GPU HWSP and then cause GPU hang.
this patch is to revoke index mode in PIPE_CTRL and MI_FLUSH_DW and
patch guest GPU HWSP address value to these commands.
Fixes: 54939ea0bd85 ("drm/i915: Switch to use HWS indices rather than addresses")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Merge back drm-intel-next for engine name definition refinement
and 54939ea0bd85 ("drm/i915: Switch to use HWS indices rather than addresses")
that would need gvt fixes to depend on.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
This is one of the patches to start replacing drm pointers
and use the intel_atomic_state and intel_crtc to derive
the necessary intel state variables required for the intel
modeset functions.
v3:
* Remove the unwanted newline (Ville)
v2:
* Flip the function arguments (Ville)
* Remove some remaining instances of drm pointers (Ville)
* Use old_crtc_state and new_crtc_state (Ville)
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190415182210.13347-1-manasi.d.navare@intel.com
|
|
If the driver is wedged, we can not issue the requests to exercise the
timelines or the system across suspend, so skip the tests. live_hangcheck
is there to fail if we cannot recover.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190413125820.14112-4-chris@chris-wilson.co.uk
|
|
Need rc5 for udl fix to add udl cleanups on top.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Pull block fixes from Jens Axboe:
"Set of fixes that should go into this round. This pull is larger than
I'd like at this time, but there's really no specific reason for that.
Some are fixes for issues that went into this merge window, others are
not. Anyway, this contains:
- Hardware queue limiting for virtio-blk/scsi (Dongli)
- Multi-page bvec fixes for lightnvm pblk
- Multi-bio dio error fix (Jason)
- Remove the cache hint from the io_uring tool side, since we didn't
move forward with that (me)
- Make io_uring SETUP_SQPOLL root restricted (me)
- Fix leak of page in error handling for pc requests (Jérôme)
- Fix BFQ regression introduced in this merge window (Paolo)
- Fix break logic for bio segment iteration (Ming)
- Fix NVMe cancel request error handling (Ming)
- NVMe pull request with two fixes (Christoph):
- fix the initial CSN for nvme-fc (James)
- handle log page offsets properly in the target (Keith)"
* tag 'for-linus-20190412' of git://git.kernel.dk/linux-block:
block: fix the return errno for direct IO
nvmet: fix discover log page when offsets are used
nvme-fc: correct csn initialization and increments on error
block: do not leak memory in bio_copy_user_iov()
lightnvm: pblk: fix crash in pblk_end_partial_read due to multipage bvecs
nvme: cancel request synchronously
blk-mq: introduce blk_mq_complete_request_sync()
scsi: virtio_scsi: limit number of hw queues by nr_cpu_ids
virtio-blk: limit number of hw queues by nr_cpu_ids
block, bfq: fix use after free in bfq_bfqq_expire
io_uring: restrict IORING_SETUP_SQPOLL to root
tools/io_uring: remove IOCQE_FLAG_CACHEHIT
block: don't use for-inside-for in bio_for_each_segment_all
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"One obvious fix for a ciostor data corruption on error bug"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: csiostor: fix missing data copy in csio_scsi_err_handler()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Here's more than a handful of clk driver fixes for changes that came
in during the merge window:
- Fix the AT91 sama5d2 programmable clk prescaler formula
- A bunch of Amlogic meson clk driver fixes for the VPU clks
- A DMI quirk for Intel's Bay Trail SoC's driver to properly mark pmc
clks as critical only when really needed
- Stop overwriting CLK_SET_RATE_PARENT flag in mediatek's clk gate
implementation
- Use the right structure to test for a frequency table in i.MX's
PLL_1416x driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: imx: Fix PLL_1416X not rounding rates
clk: mediatek: fix clk-gate flag setting
platform/x86: pmc_atom: Drop __initconst on dmi table
clk: x86: Add system specific quirk to mark clocks as critical
clk: meson: vid-pll-div: remove warning and return 0 on invalid config
clk: meson: pll: fix rounding and setting a rate that matches precisely
clk: meson-g12a: fix VPU clock parents
clk: meson: g12a: fix VPU clock muxes mask
clk: meson-gxbb: round the vdec dividers to closest
clk: at91: fix programmable clock for sama5d2
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Add a DMA alias quirk for another Marvell SATA device (Andre
Przywara)
- Fix a pciehp regression that broke safe removal of devices (Sergey
Miroshnichenko)
* tag 'pci-v5.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: pciehp: Ignore Link State Changes after powering off a slot
PCI: Add function 1 DMA alias quirk for Marvell 9170 SATA controller
|
|
Start weaning ourselves off the implicit I915_WRITE macro madness and
start using the explicit intel_uncore mmio access.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412202458.10653-1-chris@chris-wilson.co.uk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Two genirq fixes, plus an irqchip driver error handling fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Respect IRQCHIP_SKIP_SET_WAKE in irq_chip_set_wake_parent()
genirq: Initialize request_mutex if CONFIG_SPARSE_IRQ=n
irqchip/irq-ls1x: Missing error code in ls1x_intc_of_init()
|
|
Most of the conditional code for ICELAKE also applies to ELKHARTLAKE
so use IS_GEN(dev_priv, 11) even for PM and Workarounds for now.
v2: - Rename commit (Jose)
- Include a wm workaround (Jose and Lucas)
- Include display core init (Jose and Lucas)
v3: Add a missing case of gen greater-than 11 (Jose)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412180920.22347-1-rodrigo.vivi@intel.com
|
|
Code which initializes the "clk_init_data.ops" checks pll->rate_table
before that field is ever assigned to so it always picks
"clk_pll1416x_min_ops".
This breaks dynamic rate rounding for features such as cpufreq.
Fix by checking pll_clk->rate_table instead, here pll_clk refers to
the constant initialization data coming from per-soc clk driver.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add support for 2MB sized pages. This will improve our map and unmap
times and save a bit of memory by avoiding 3rd level page tables for
contiguous allocations.
As we use shmem for buffers and huge page allocations for shmem are off
by default, there isn't an improvement out of the box and userspace must
enable THP for shmem.
It's not clear if the h/w can support 1GB page sizes which standard
ARM long format descriptors support. In any case, it is unlikely we'll
see any contiguous 1GB allocations on current h/w.
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411215313.1937-1-robh@kernel.org
|
|
If cat error is set, we need to clear it by acking it. Further,
if it is set, we must not do a normal request for reset.
v2: avoid goto (Chris)
v3: comment, error format, direct assign (Chris)
Bspec: 12567
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412165353.16432-1-mika.kuoppala@linux.intel.com
|
|
If the engine says it is ready for reset, it is ready
so avoid further dancing and proceed.
v2: reg (Chris)
v3: request, ack, mask from following patch (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412165335.16347-1-mika.kuoppala@linux.intel.com
|
|
This adds the initial driver for panfrost which supports Arm Mali
Midgard and Bifrost family of GPUs. Currently, only the T860 and
T760 Midgard GPUs have been tested.
v2:
- Add GPU reset on job hangs (Tomeu)
- Add RuntimePM and devfreq support (Tomeu)
- Fix T760 support (Tomeu)
- Add a TODO file (Rob, Tomeu)
- Support multiple in fences (Tomeu)
- Drop support for shared fences (Tomeu)
- Fill in MMU de-init (Rob)
- Move register definitions back to single header (Rob)
- Clean-up hardcoded job submit todos (Rob)
- Implement feature setup based on features/issues (Rob)
- Add remaining Midgard DT compatible strings (Rob)
v3:
- Add support for reset lines (Neil)
- Add a MAINTAINERS entry (Rob)
- Call dma_set_mask_and_coherent (Rob)
- Do MMU invalidate on map and unmap. Restructure to do a single
operation per map/unmap call. (Rob)
- Add a missing explicit padding to struct drm_panfrost_create_bo (Rob)
- Fix 0-day error: "panfrost_devfreq.c:151:9-16: ERROR: PTR_ERR applied after initialization to constant on line 150"
- Drop HW_FEATURE_AARCH64_MMU conditional (Rob)
- s/DRM_PANFROST_PARAM_GPU_ID/DRM_PANFROST_PARAM_GPU_PROD_ID/ (Rob)
- Check drm_gem_shmem_prime_import_sg_table() error code (Rob)
- Re-order power on sequence (Rob)
- Move panfrost_acquire_object_fences() before scheduling job (Rob)
- Add NULL checks on array pointers in job clean-up (Rob)
- Rework devfreq (Tomeu)
- Fix devfreq init with no regulator (Rob)
- Various WS and comments clean-up (Rob)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marty E. Plummer <hanetzer@startmail.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409205427.6943-4-robh@kernel.org
|
|
Similar to the single handle drm_gem_object_lookup(),
drm_gem_objects_lookup() takes an array of handles and returns an array
of GEM objects.
v2:
- Take the userspace pointer directly and allocate the array.
- Expand the function documentation.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409205427.6943-3-robh@kernel.org
|
|
ARM Mali midgard GPU is similar to standard 64-bit stage 1 page tables, but
have a few differences. Add a new format type to represent the format. The
input address size is 48-bits and the output address size is 40-bits (and
possibly less?). Note that the later bifrost GPUs follow the standard
64-bit stage 1 format.
The differences in the format compared to 64-bit stage 1 format are:
The 3rd level page entry bits are 0x1 instead of 0x3 for page entries.
The access flags are not read-only and unprivileged, but read and write.
This is similar to stage 2 entries, but the memory attributes field matches
stage 1 being an index.
The nG bit is not set by the vendor driver. This one didn't seem to matter,
but we'll keep it aligned to the vendor driver.
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux-foundation.org
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409205427.6943-2-robh@kernel.org
|
|
CLK_SET_RATE_PARENT would be dropped.
Merge two flag setting together to correct the error.
Fixes: 5a1cc4c27ad2 ("clk: mediatek: Add flags to mtk_gate")
Cc: <stable@vger.kernel.org>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fix from Joerg Roedel:
"Fix an AMD IOMMU issue where the driver didn't correctly setup the
exclusion range in the hardware registers, resulting in exclusion
ranges being one page too big.
This can cause data corruption of the address of that last page is
used by DMA operations"
* tag 'iommu-fix-v5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Set exclusion range correctly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- alcor: Stabilize data write requests
- sdhci-omap: Fix command error path during tuning
* tag 'mmc-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning
mmc: alcor: don't write data before command has completed
|
