summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-04-14net/mlx5: Fix setting of devlink traps in switchdev modeAya Levin
Prevent setting of devlink traps on the uplink while in switchdev mode. In this mode, it is the SW switch responsibility to handle both packets with a mismatch in destination MAC or VLAN ID. Therefore, there are no flow steering tables to trap undesirable packets and driver crashes upon setting a trap. Fixes: 241dc159391f ("net/mlx5: Notify on trap action by blocking event") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14Merge branch '10GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-04-14 This series contains updates to ixgbe and ice drivers. Alex Duyck fixes a NULL pointer dereference for ixgbe. Yongxin Liu fixes an unbalanced enable/disable which was causing a call trace with suspend for ixgbe. Colin King fixes a potential infinite loop for ice. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14Revert "net: stmmac: re-init rx buffers when mac resume back"Thierry Reding
This reverts commit 9c63faaa931e443e7abbbee9de0169f1d4710546, which introduces a suspend/resume regression on Jetson TX2 boards that can be reproduced every time. Given that the issue that this was supposed to fix only occurs very sporadically the safest course of action is to revert before v5.12 and then we can have another go at fixing the more rare issue in the next release (and perhaps backport it if necessary). The root cause of the observed problem seems to be that when the system is suspended, some packets are still in transit. When the descriptors for these buffers are cleared on resume, the descriptors become invalid and cause a fatal bus error. Link: https://lore.kernel.org/r/708edb92-a5df-ecc4-3126-5ab36707e275@nvidia.com/ Reported-by: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14cavium/liquidio: Fix duplicate argumentWan Jiabing
Fix the following coccicheck warning: ./drivers/net/ethernet/cavium/liquidio/cn66xx_regs.h:413:6-28: duplicated argument to & or | The CN6XXX_INTR_M1UPB0_ERR here is duplicate. Here should be CN6XXX_INTR_M1UNB0_ERR. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14net: macb: fix the restore of cmp registersClaudiu Beznea
Commit a14d273ba159 ("net: macb: restore cmp registers on resume path") introduces the restore of CMP registers on resume path. In case the IP doesn't support type 2 screeners (zero on DCFG8 register) the struct macb::rx_fs_list::list is not initialized and thus the list_for_each_entry(item, &bp->rx_fs_list.list, list) loop introduced in commit a14d273ba159 ("net: macb: restore cmp registers on resume path") will access an uninitialized list leading to crash. Thus, initialize the struct macb::rx_fs_list::list without taking into account if the IP supports type 2 screeners or not. Fixes: a14d273ba159 ("net: macb: restore cmp registers on resume path") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14drm/vmwgfx: Make sure bo's are unpinned before putting them backZack Rusin
During cotable resize we pin the backup buffer to make sure the trylock doesn't fail. We were never unpinning the backup buffer resulting in every subsequent cotable resize trying to release a pinned bo. After we copy the old backup to the new we can release the pin. Mob's are always pinned so we just have to make sure we unpin them before releasing them. Reviewed-by: Thomas Hellström (Intel) <thomas_os@shipmail.org> Fixes: d1a73c641afd ("drm/vmwgfx: Make sure we unpin no longer needed buffers") Link: https://patchwork.freedesktop.org/patch/msgid/20210413205938.788366-1-zackr@vmware.com Signed-off-by: Zack Rusin <zackr@vmware.com>
2021-04-14drm/vmwgfx: Fix the lockdep breakageZack Rusin
Thomas has noticed that the lockdep was broken in vmwgfx. It was broken during the pci initialization rework. This fixes the breakage by making sure we initialize the locking code before doing anything else. This was independently spotted and fixed by Tetsuo Handa as well. Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Zack Rusin <zackr@vmware.com> Fixes: 8772c0bb58bbf98a ("drm/vmwgfx: Cleanup pci resource allocation") Link: https://patchwork.freedesktop.org/patch/msgid/20210408172245.673785-1-zackr@vmware.com
2021-04-14drm/vmwgfx: Make sure we unpin no longer needed buffersZack Rusin
We were not correctly unpinning no longer needed buffers. In particular vmw_buffer_object, which is internally often pinned on creation wasn't unpinned on destruction and none of the internal MOB buffers were unpinned before being put back. Technically this existed for a long time but commit 57fcd550eb15 ("drm/ttm: Warn on pinning without holding a reference") introduced a WARN_ON which was filling up the kernel logs rather quickly. Quite frankly internal usage of vmw_buffer_object and in general pinning needs to be refactored in vmwgfx but for now this makes it work. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Fixes: 57fcd550eb15 ("drm/ttm: Warn on pinning without holding a reference") Link: https://patchwork.freedesktop.org/patch/414984/?series=86052&rev=1 Cc: Huang Rui <ray.huang@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: dri-devel@lists.freedesktop.org
2021-04-14Merge tag 'for-5.12/dm-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fix from Mike Snitzer: "Fix DM verity target FEC support's RS roots IO to always be aligned. This fixes a previous stable@ fix that overcorrected for a different configuration that also resulted in misaligned roots IO" * tag 'for-5.12/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm verity fec: fix misaligned RS roots IO
2021-04-14vrf: fix a comment about loopback deviceNicolas Dichtel
This is a leftover of the below commit. Fixes: 4f04256c983a ("net: vrf: Drop local rtable and rt6_info") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14ibmvnic: remove duplicate napi_schedule call in open functionLijun Pan
Remove the unnecessary napi_schedule() call in __ibmvnic_open() since interrupt_rx() calls napi_schedule_prep/__napi_schedule during every receive interrupt. Fixes: ed651a10875f ("ibmvnic: Updated reset handling") Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14ibmvnic: remove duplicate napi_schedule call in do_reset functionLijun Pan
During adapter reset, do_reset/do_hard_reset calls ibmvnic_open(), which will calls napi_schedule if previous state is VNIC_CLOSED (i.e, the reset case, and "ifconfig down" case). So there is no need for do_reset to call napi_schedule again at the end of the function though napi_schedule will neglect the request if napi is already scheduled. Fixes: ed651a10875f ("ibmvnic: Updated reset handling") Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14ibmvnic: avoid calling napi_disable() twiceLijun Pan
__ibmvnic_open calls napi_disable without checking whether NAPI polling has already been disabled or not. This could cause napi_disable being called twice, which could generate deadlock. For example, the first napi_disable will spin until NAPI_STATE_SCHED is cleared by napi_complete_done, then set it again. When napi_disable is called the second time, it will loop infinitely because no dev->poll will be running to clear NAPI_STATE_SCHED. To prevent above scenario from happening, call ibmvnic_napi_disable() which checks if napi is disabled or not before calling napi_disable. Fixes: bfc32f297337 ("ibmvnic: Move resource initialization to its own routine") Suggested-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14r8169: don't advertise pause in jumbo modeHeiner Kallweit
It has been reported [0] that using pause frames in jumbo mode impacts performance. There's no available chip documentation, but vendor drivers r8168 and r8125 don't advertise pause in jumbo mode. So let's do the same, according to Roman it fixes the issue. [0] https://bugzilla.kernel.org/show_bug.cgi?id=212617 Fixes: 9cf9b84cc701 ("r8169: make use of phy_set_asym_pause") Reported-by: Roman Mamedov <rm+bko@romanrm.net> Tested-by: Roman Mamedov <rm+bko@romanrm.net> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14mei: me: add Alder Lake P device id.Tomas Winkler
Add Alder Lake P device ID. Cc: <stable@vger.kernel.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20210414045200.3498241-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14dm verity fec: fix misaligned RS roots IOJaegeuk Kim
commit df7b59ba9245 ("dm verity: fix FEC for RS roots unaligned to block size") introduced the possibility for misaligned roots IO relative to the underlying device's logical block size. E.g. Android's default RS roots=2 results in dm_bufio->block_size=1024, which causes the following EIO if the logical block size of the device is 4096, given v->data_dev_block_bits=12: E sd 0 : 0:0:0: [sda] tag#30 request not aligned to the logical block size E blk_update_request: I/O error, dev sda, sector 10368424 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 E device-mapper: verity-fec: 254:8: FEC 9244672: parity read failed (block 18056): -5 Fix this by onlu using f->roots for dm_bufio blocksize IFF it is aligned to v->data_dev_block_bits. Fixes: df7b59ba9245 ("dm verity: fix FEC for RS roots unaligned to block size") Cc: stable@vger.kernel.org Signed-off-by: Jaegeuk Kim <jaegeuk@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-04-14Merge tag 'dmaengine-fix-5.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "A couple of dmaengine driver fixes for: - race and descriptor issue for xilinx driver - fix interrupt handling, wq state & cleanup, field sizes for completion, msix permissions for idxd driver - runtime pm fix for tegra driver - double free fix in dma_async_device_register" * tag 'dmaengine-fix-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: idxd: fix wq cleanup of WQCFG registers dmaengine: idxd: clear MSIX permission entry on shutdown dmaengine: plx_dma: add a missing put_device() on error path dmaengine: tegra20: Fix runtime PM imbalance on error dmaengine: Fix a double free in dma_async_device_register dmaengine: dw: Make it dependent to HAS_IOMEM dmaengine: idxd: fix wq size store permission state dmaengine: idxd: fix opcap sysfs attribute output dmaengine: idxd: fix delta_rec and crc size field for completion record dmaengine: idxd: Fix clobbering of SWERR overflow bit on writeback dmaengine: xilinx: dpdma: Fix race condition in done IRQ dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
2021-04-14Merge tag 'vfio-v5.12-rc8' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO fix from Alex Williamson: "Verify mmap region within range (Christian A. Ehrhardt)" * tag 'vfio-v5.12-rc8' of git://github.com/awilliam/linux-vfio: vfio/pci: Add missing range check in vfio_pci_mmap
2021-04-14Drivers: hv: vmbus: remove unused functionJiapeng Chong
Fix the following clang warning: drivers/hv/ring_buffer.c:89:1: warning: unused function 'hv_set_next_read_location' [-Wunused-function]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1618381282-119135-1-git-send-email-jiapeng.chong@linux.alibaba.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-04-14platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with ↵Steffen Dirkwinkel
critclk_systems DMI table pmc_plt_clk* clocks are used for ethernet controllers, so need to stay turned on. This adds the affected board family to critclk_systems DMI table, so the clocks are marked as CLK_CRITICAL and not turned off. This replaces the previously listed boards with a match for the whole device family CBxx63. CBxx63 matches only baytrail devices. There are new affected boards that would otherwise need to be listed. There are unaffected boards in the family, but having the clocks turned on is not an issue. Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Link: https://lore.kernel.org/r/20210412133006.397679-1-linux-kernel-dev@beckhoff.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-14char: tpm: fix error return code in tpm_cr50_i2c_tis_recv()Zhihao Cheng
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 3a253caaad11 ("char: tpm: add i2c driver for cr50") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14tpm: vtpm_proxy: Avoid reading host log when using a virtual deviceStefan Berger
Avoid allocating memory and reading the host log when a virtual device is used since this log is of no use to that driver. A virtual device can be identified through the flag TPM_CHIP_FLAG_VIRTUAL, which is only set for the tpm_vtpm_proxy driver. Cc: stable@vger.kernel.org Fixes: 6f99612e2500 ("tpm: Proxy driver for supporting multiple emulated TPMs") Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14tpm: acpi: Check eventlog signature before using itStefan Berger
Check the eventlog signature before using it. This avoids using an empty log, as may be the case when QEMU created the ACPI tables, rather than probing the EFI log next. This resolves an issue where the EFI log was empty since an empty ACPI log was used. Cc: stable@vger.kernel.org Fixes: 85467f63a05c ("tpm: Add support for event log pointer found in TPM2 ACPI table") Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14tpm: efi: Use local variable for calculating final log sizeStefan Berger
When tpm_read_log_efi is called multiple times, which happens when one loads and unloads a TPM2 driver multiple times, then the global variable efi_tpm_final_log_size will at some point become a negative number due to the subtraction of final_events_preboot_size occurring each time. Use a local variable to avoid this integer underflow. The following issue is now resolved: Mar 8 15:35:12 hibinst kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Mar 8 15:35:12 hibinst kernel: Workqueue: tpm-vtpm vtpm_proxy_work [tpm_vtpm_proxy] Mar 8 15:35:12 hibinst kernel: RIP: 0010:__memcpy+0x12/0x20 Mar 8 15:35:12 hibinst kernel: Code: 00 b8 01 00 00 00 85 d2 74 0a c7 05 44 7b ef 00 0f 00 00 00 c3 cc cc cc 66 66 90 66 90 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 <f3> 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 f3 a4 Mar 8 15:35:12 hibinst kernel: RSP: 0018:ffff9ac4c0fcfde0 EFLAGS: 00010206 Mar 8 15:35:12 hibinst kernel: RAX: ffff88f878cefed5 RBX: ffff88f878ce9000 RCX: 1ffffffffffffe0f Mar 8 15:35:12 hibinst kernel: RDX: 0000000000000003 RSI: ffff9ac4c003bff9 RDI: ffff88f878cf0e4d Mar 8 15:35:12 hibinst kernel: RBP: ffff9ac4c003b000 R08: 0000000000001000 R09: 000000007e9d6073 Mar 8 15:35:12 hibinst kernel: R10: ffff9ac4c003b000 R11: ffff88f879ad3500 R12: 0000000000000ed5 Mar 8 15:35:12 hibinst kernel: R13: ffff88f878ce9760 R14: 0000000000000002 R15: ffff88f77de7f018 Mar 8 15:35:12 hibinst kernel: FS: 0000000000000000(0000) GS:ffff88f87bd00000(0000) knlGS:0000000000000000 Mar 8 15:35:12 hibinst kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Mar 8 15:35:12 hibinst kernel: CR2: ffff9ac4c003c000 CR3: 00000001785a6004 CR4: 0000000000060ee0 Mar 8 15:35:12 hibinst kernel: Call Trace: Mar 8 15:35:12 hibinst kernel: tpm_read_log_efi+0x152/0x1a7 Mar 8 15:35:12 hibinst kernel: tpm_bios_log_setup+0xc8/0x1c0 Mar 8 15:35:12 hibinst kernel: tpm_chip_register+0x8f/0x260 Mar 8 15:35:12 hibinst kernel: vtpm_proxy_work+0x16/0x60 [tpm_vtpm_proxy] Mar 8 15:35:12 hibinst kernel: process_one_work+0x1b4/0x370 Mar 8 15:35:12 hibinst kernel: worker_thread+0x53/0x3e0 Mar 8 15:35:12 hibinst kernel: ? process_one_work+0x370/0x370 Cc: stable@vger.kernel.org Fixes: 166a2809d65b ("tpm: Don't duplicate events from the final event log in the TCG2 log") Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-04-14Merge tag 'intel-pinctrl-v5.12-4' of ↵Linus Walleij
gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into fixes intel-pinctrl for v5.12-4 * Fix pin numbering per community in Intel Lewisburg driver The following is an automated git shortlog grouped by driver: lewisburg: - Update number of pins in community
2021-04-13xen-netback: Check for hotplug-status existence before watchingMichael Brown
The logic in connect() is currently written with the assumption that xenbus_watch_pathfmt() will return an error for a node that does not exist. This assumption is incorrect: xenstore does allow a watch to be registered for a nonexistent node (and will send notifications should the node be subsequently created). As of commit 1f2565780 ("xen-netback: remove 'hotplug-status' once it has served its purpose"), this leads to a failure when a domU transitions into XenbusStateConnected more than once. On the first domU transition into Connected state, the "hotplug-status" node will be deleted by the hotplug_status_changed() callback in dom0. On the second or subsequent domU transition into Connected state, the hotplug_status_changed() callback will therefore never be invoked, and so the backend will remain stuck in InitWait. This failure prevents scenarios such as reloading the xen-netfront module within a domU, or booting a domU via iPXE. There is unfortunately no way for the domU to work around this dom0 bug. Fix by explicitly checking for existence of the "hotplug-status" node, thereby creating the behaviour that was previously assumed to exist. Signed-off-by: Michael Brown <mbrown@fensystems.co.uk> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13ibmvnic: correctly use dev_consume/free_skb_irqLijun Pan
It is more correct to use dev_kfree_skb_irq when packets are dropped, and to use dev_consume_skb_irq when packets are consumed. Fixes: 0d973388185d ("ibmvnic: Introduce xmit_more support using batched subCRQ hcalls") Suggested-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13Merge tag 'fixes-for-5.12-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fix from Richard Weinberger: "Fix WAITRDY break condition and timeout in mtk nand driver" * tag 'fixes-for-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: mtk: Fix WAITRDY break condition and timeout
2021-04-13ice: Fix potential infinite loop when using u8 loop counterColin Ian King
A for-loop is using a u8 loop counter that is being compared to a u32 cmp_dcbcfg->numapp to check for the end of the loop. If cmp_dcbcfg->numapp is larger than 255 then the counter j will wrap around to zero and hence an infinite loop occurs. Fix this by making counter j the same type as cmp_dcbcfg->numapp. Addresses-Coverity: ("Infinite loop") Fixes: aeac8ce864d9 ("ice: Recognize 860 as iSCSI port in CEE mode") Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-13ixgbe: fix unbalanced device enable/disable in suspend/resumeYongxin Liu
pci_disable_device() called in __ixgbe_shutdown() decreases dev->enable_cnt by 1. pci_enable_device_mem() which increases dev->enable_cnt by 1, was removed from ixgbe_resume() in commit 6f82b2558735 ("ixgbe: use generic power management"). This caused unbalanced increase/decrease. So add pci_enable_device_mem() back. Fix the following call trace. ixgbe 0000:17:00.1: disabling already-disabled device Call Trace: __ixgbe_shutdown+0x10a/0x1e0 [ixgbe] ixgbe_suspend+0x32/0x70 [ixgbe] pci_pm_suspend+0x87/0x160 ? pci_pm_freeze+0xd0/0xd0 dpm_run_callback+0x42/0x170 __device_suspend+0x114/0x460 async_suspend+0x1f/0xa0 async_run_entry_fn+0x3c/0xf0 process_one_work+0x1dd/0x410 worker_thread+0x34/0x3f0 ? cancel_delayed_work+0x90/0x90 kthread+0x14c/0x170 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30 Fixes: 6f82b2558735 ("ixgbe: use generic power management") Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-13ixgbe: Fix NULL pointer dereference in ethtool loopback testAlexander Duyck
The ixgbe driver currently generates a NULL pointer dereference when performing the ethtool loopback test. This is due to the fact that there isn't a q_vector associated with the test ring when it is setup as interrupts are not normally added to the test rings. To address this I have added code that will check for a q_vector before returning a napi_id value. If a q_vector is not present it will return a value of 0. Fixes: b02e5a0ebb17 ("xsk: Propagate napi_id to XDP socket Rx path") Signed-off-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-13vfio/pci: Add missing range check in vfio_pci_mmapChristian A. Ehrhardt
When mmaping an extra device region verify that the region index derived from the mmap offset is valid. Fixes: a15b1883fee1 ("vfio_pci: Allow mapping extra regions") Cc: stable@vger.kernel.org Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Message-Id: <20210412214124.GA241759@lisa.in-ulm.de> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-04-13pinctrl: lewisburg: Update number of pins in communityYuanyuan Zhong
When updating pin names for Intel Lewisburg, the numbers of pins were left behind. Update them accordingly. Fixes: e66ff71fd0db ("pinctrl: lewisburg: Update pin list according to v1.1v6") Signed-off-by: Yuanyuan Zhong <yzhong@purestorage.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-04-13platform/x86: add Gigabyte WMI temperature driverThomas Weißschuh
Tested with * X570 I Aorus Pro Wifi (rev 1.0) * B550M DS3H * B550 Gaming X V2 (rev.1.x) * Z390 I AORUS PRO WIFI (rev. 1.0) Those mainboards contain an ITE chips for management and monitoring. They could also be handled by drivers/hwmon/i87.c. But the SuperIO range used by i87 is already claimed and used by the firmware. The following warning is printed at boot: kernel: ACPI Warning: SystemIO range 0x0000000000000A45-0x0000000000000A46 conflicts with OpRegion 0x0000000000000A45-0x0000000000000A46 (\GSA1.SIO1) (20200528/utaddress-204) kernel: ACPI: This conflict may cause random problems and system instability kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver This driver implements such an ACPI driver. Unfortunately not all sensor registers are handled by the firmware and even less are exposed via WMI. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210412123513.628901-1-linux@weissschuh.net Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-13platform/x86: intel_pmc_core: export platform global reset bits via etr3 ↵Tamar Mashiah
sysfs file During PCH (platform/board) manufacturing process a global platform reset has to be induced in order for the configuration changes take the effect upon following platform reset. This is an internal platform state and is not intended to be used in the regular platform resets. The setting is exposed via ETR3 (Extended Test Mode Register 3). After the manufacturing process is completed the register cannot be written anymore and is hardware locked. This setting was commonly done by accessing PMC registers via /dev/mem but due to security concerns /dev/mem access is much more restricted, hence the reason for exposing this setting via the dedicated sysfs interface. To prevent post manufacturing abuse the register is protected by hardware locking and the file is set to read-only mode via is_visible handler. The register in MMIO space is defined for Cannon Lake and newer PCHs. Cc: Hans de Goede <hdegoede@redhat.com> Cc: David E Box <david.e.box@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tamar Mashiah <tamar.mashiah@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20210411141532.3004893-1-tomas.winkler@intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-13platform/x86: thinkpad_acpi: Correct thermal sensor allocationMark Pearson
On recent Thinkpad platforms it was reported that temp sensor 11 was always incorrectly displaying 66C. It turns out the reason for this is that this location in EC RAM is not a temperature sensor but is the power supply ID (offset 0xC2). Based on feedback from the Lenovo firmware team the EC RAM version can be determined and for the current version (3) only the 0x78 to 0x7F range is used for temp sensors. I don't have any details for earlier versions so I have left the implementation unaltered there. Note - in this block only 0x78 and 0x79 are officially designated (CPU & GPU sensors). The use of the other locations in the block will vary from platform to platform; but the existing logic to detect a sensor presence holds. Signed-off-by: Mark Pearson <markpearson@lenovo.com> Link: https://lore.kernel.org/r/20210407212015.298222-1-markpearson@lenovo.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-12net: phy: marvell: fix detection of PHY on Topaz switchesPali Rohár
Since commit fee2d546414d ("net: phy: marvell: mv88e6390 temperature sensor reading"), Linux reports the temperature of Topaz hwmon as constant -75°C. This is because switches from the Topaz family (88E6141 / 88E6341) have the address of the temperature sensor register different from Peridot. This address is instead compatible with 88E1510 PHYs, as was used for Topaz before the above mentioned commit. Create a new mapping table between switch family and PHY ID for families which don't have a model number. And define PHY IDs for Topaz and Peridot families. Create a new PHY ID and a new PHY driver for Topaz's internal PHY. The only difference from Peridot's PHY driver is the HWMON probing method. Prior this change Topaz's internal PHY is detected by kernel as: PHY [...] driver [Marvell 88E6390] (irq=63) And afterwards as: PHY [...] driver [Marvell 88E6341 Family] (irq=63) Signed-off-by: Pali Rohár <pali@kernel.org> BugLink: https://github.com/globalscaletechnologies/linux/issues/1 Fixes: fee2d546414d ("net: phy: marvell: mv88e6390 temperature sensor reading") Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-12dmaengine: idxd: fix wq cleanup of WQCFG registersDave Jiang
A pre-release silicon erratum workaround where wq reset does not clear WQCFG registers was leaked into upstream code. Use wq reset command instead of blasting the MMIO region. This also address an issue where we clobber registers in future devices. Fixes: da32b28c95a7 ("dmaengine: idxd: cleanup workqueue config after disabling") Reported-by: Shreenivaas Devarajan <shreenivaas.devarajan@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/161824330020.881560.16375921906426627033.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-12dmaengine: idxd: clear MSIX permission entry on shutdownDave Jiang
Add disabling/clearing of MSIX permission entries on device shutdown to mirror the enabling of the MSIX entries on probe. Current code left the MSIX enabled and the pasid entries still programmed at device shutdown. Fixes: 8e50d392652f ("dmaengine: idxd: Add shared workqueue support") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/161824457969.882533.6020239898682672311.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-12drm/i915/display/vlv_dsi: Do not skip panel_pwr_cycle_delay when disabling ↵Hans de Goede
the panel After the recently added commit fe0f1e3bfdfe ("drm/i915: Shut down displays gracefully on reboot"), the DSI panel on a Cherry Trail based Predia Basic tablet would no longer properly light up after reboot. I've managed to reproduce this without rebooting by doing: chvt 3; echo 1 > /sys/class/graphics/fb0/blank;\ echo 0 > /sys/class/graphics/fb0/blank Which rapidly turns the panel off and back on again. The vlv_dsi.c code uses an intel_dsi_msleep() helper for the various delays used for panel on/off, since starting with MIPI-sequences version >= 3 the delays are already included inside the MIPI-sequences. The problems exposed by the "Shut down displays gracefully on reboot" change, show that using this helper for the panel_pwr_cycle_delay is not the right thing to do. This has not been noticed until now because normally the panel never is cycled off and directly on again in quick succession. Change the msleep for the panel_pwr_cycle_delay to a normal msleep() call to avoid the panel staying black after a quick off + on cycle. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: fe0f1e3bfdfe ("drm/i915: Shut down displays gracefully on reboot") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325114823.44922-1-hdegoede@redhat.com (cherry picked from commit 2878b29fc25a0dac0e1c6c94177f07c7f94240f0) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-04-12drm/i915: Don't zero out the Y plane's watermarksVille Syrjälä
Don't zero out the watermarks for the Y plane since we've already computed them when computing the UV plane's watermarks (since the UV plane always appears before ethe Y plane when iterating through the planes). This leads to allocating no DDB for the Y plane since .min_ddb_alloc also gets zeroed. And that of course leads to underruns when scanning out planar formats. Cc: stable@vger.kernel.org Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: dbf71381d733 ("drm/i915: Nuke intel_atomic_crtc_state_for_each_plane_state() from skl+ wm code") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210327005945.4929-1-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (cherry picked from commit f99b805fb9413ff007ca0b6add871737664117dd) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-04-12drm/i915/dpcd_bl: Don't try vesa interface unless specified by VBTLyude Paul
Looks like that there actually are another subset of laptops on the market that don't support the Intel HDR backlight interface, but do advertise support for the VESA DPCD backlight interface despite the fact it doesn't seem to work. Note though I'm not entirely clear on this - on one of the machines where this issue was observed, I also noticed that we appeared to be rejecting the VBT defined backlight frequency in intel_dp_aux_vesa_calc_max_backlight(). It's noted in this function that: /* Use highest possible value of Pn for more granularity of brightness * adjustment while satifying the conditions below. * ... * - FxP is within 25% of desired value. * Note: 25% is arbitrary value and may need some tweak. */ So it's possible that this value might just need to be tweaked, but for now let's just disable the VESA backlight interface unless it's specified in the VBT just to be safe. We might be able to try enabling this again by default in the future. Fixes: 2227816e647a ("drm/i915/dp: Allow forcing specific interfaces through enable_dpcd_backlight") Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/3169 Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210318170204.513000-1-lyude@redhat.com (cherry picked from commit 9e2eb6d5380e9dadcd2baecb51f238e5eba94bee) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-04-12dmaengine: plx_dma: add a missing put_device() on error pathDan Carpenter
Add a missing put_device(&pdev->dev) if the call to dma_async_device_register(dma); fails. Fixes: 905ca51e63be ("dmaengine: plx-dma: Introduce PLX DMA engine PCI driver skeleton") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/YFnq/0IQzixtAbC1@mwanda Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-12dmaengine: tegra20: Fix runtime PM imbalance on errorDinghao Liu
pm_runtime_get_sync() will increase the runtime PM counter even it returns an error. Thus a pairing decrement is needed to prevent refcount leak. Fix this by replacing this API with pm_runtime_resume_and_get(), which will not change the runtime PM counter on error. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210409082805.23643-1-dinghao.liu@zju.edu.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-12dmaengine: Fix a double free in dma_async_device_registerLv Yunlong
In the first list_for_each_entry() macro of dma_async_device_register, it gets the chan from list and calls __dma_async_device_channel_register (..,chan). We can see that chan->local is allocated by alloc_percpu() and it is freed chan->local by free_percpu(chan->local) when __dma_async_device_channel_register() failed. But after __dma_async_device_channel_register() failed, the caller will goto err_out and freed the chan->local in the second time by free_percpu(). The cause of this problem is forget to set chan->local to NULL when chan->local was freed in __dma_async_device_channel_register(). My patch sets chan->local to NULL when the callee failed to avoid double free. Fixes: d2fb0a0438384 ("dmaengine: break out channel registration") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20210331014458.3944-1-lyl2019@mail.ustc.edu.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-12dmaengine: dw: Make it dependent to HAS_IOMEMAndy Shevchenko
Some architectures do not provide devm_*() APIs. Hence make the driver dependent on HAVE_IOMEM. Fixes: dbde5c2934d1 ("dw_dmac: use devm_* functions to simplify code") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20210324141757.24710-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-12dmaengine: idxd: fix wq size store permission stateDave Jiang
WQ size can only be changed when the device is disabled. Current code allows change when device is enabled but wq is disabled. Change the check to detect device state. Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/161782558755.107710.18138252584838406025.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-12dmaengine: idxd: fix opcap sysfs attribute outputDave Jiang
The operation capability register is 256bits. The current output only prints out the first 64bits. Fix to output the entire 256bits. The current code omits operation caps from IAX devices. Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver") Reported-by: Lucas Van <lucas.van@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/161645624963.2003736.829798666998490151.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-12dmaengine: idxd: Fix clobbering of SWERR overflow bit on writebackDave Jiang
Current code blindly writes over the SWERR and the OVERFLOW bits. Write back the bits actually read instead so the driver avoids clobbering the OVERFLOW bit that comes after the register is read. Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/161352082229.3511254.1002151220537623503.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-12crypto: chelsio - Read rxchannel-id from firmwareAyush Sawal
The rxchannel id is updated by the driver using the port no value, but this does not ensure that the value is correct. So now rx channel value is obtained from etoc channel map value. Fixes: 567be3a5d227 ("crypto: chelsio - Use multiple txq/rxq per...") Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit (git 2.34.1) at 2025-09-13 13:50:07 +0000