| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for 5.12
The socinfo driver gains support for dumping information about the platform's
PMICs, as well as new definitions for a number of platforms. The LLCC driver
gains SM8250 support, AOSS QMP gains SM8350 support and the RPMPD driver gains
support for MSM8994 power domains. In addition to this it contains a few minor
fixes in the ocmem, rpmh and llcc drivers.
* tag 'qcom-drivers-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: ocmem: don't return NULL in of_get_ocmem
soc: qcom: socinfo: Remove unwanted le32_to_cpu()
soc: qcom: aoss: Add SM8350 compatible
drivers: soc: qcom: rpmpd: Add msm8994 RPM Power Domains
soc: qcom: socinfo: Fix an off by one in qcom_show_pmic_model()
soc: qcom: socinfo: Fix off-by-one array index bounds check
soc: qcom: socinfo: Add MDM9607 IDs
soc: qcom: socinfo: Add SoC IDs for APQ/MSM8998
soc: qcom: socinfo: Add SoC IDs for 630 family
soc: qcom: socinfo: Open read access to all for debugfs
soc: qcom: socinfo: add info from PMIC models array
soc: qcom: socinfo: add several PMIC IDs
soc: qcom: socinfo: add qrb5165 SoC ID
soc: qcom: rpmh: Remove serialization of TCS commands
soc: qcom: smem: use %*ph to print small buffer
dt-bindings: soc: qcom: convert qcom,smem bindings to yaml
drivers: qcom: rpmh-rsc: Do not read back the register write on trigger
soc: qcom: llcc-qcom: Add support for SM8250 SoC
soc: qcom: llcc-qcom: Extract major hardware version
dt-bindings: msm: Add LLCC for SM8250
Link: https://lore.kernel.org/r/20210204052258.388890-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There are several issues which may be seen when the link goes down while
forwarding traffic, all of which can be attributed to the fact that the
port flushing procedure from the reference manual was not closely
followed.
With flow control enabled on both the ingress port and the egress port,
it may happen when a link goes down that Ethernet packets are in flight.
In flow control mode, frames are held back and not dropped. When there
is enough traffic in flight (example: iperf3 TCP), then the ingress port
might enter congestion and never exit that state. This is a problem,
because it is the egress port's link that went down, and that has caused
the inability of the ingress port to send packets to any other port.
This is solved by flushing the egress port's queues when it goes down.
There is also a problem when performing stream splitting for
IEEE 802.1CB traffic (not yet upstream, but a sort of multicast,
basically). There, if one port from the destination ports mask goes
down, splitting the stream towards the other destinations will no longer
be performed. This can be traced down to this line:
ocelot_port_writel(ocelot_port, 0, DEV_MAC_ENA_CFG);
which should have been instead, as per the reference manual:
ocelot_port_rmwl(ocelot_port, 0, DEV_MAC_ENA_CFG_RX_ENA,
DEV_MAC_ENA_CFG);
Basically only DEV_MAC_ENA_CFG_RX_ENA should be disabled, but not
DEV_MAC_ENA_CFG_TX_ENA - I don't have further insight into why that is
the case, but apparently multicasting to several ports will cause issues
if at least one of them doesn't have DEV_MAC_ENA_CFG_TX_ENA set.
I am not sure what the state of the Ocelot VSC7514 driver is, but
probably not as bad as Felix/Seville, since VSC7514 uses phylib and has
the following in ocelot_adjust_link:
if (!phydev->link)
return;
therefore the port is not really put down when the link is lost, unlike
the DSA drivers which use .phylink_mac_link_down for that.
Nonetheless, I put ocelot_port_flush() in the common ocelot.c because it
needs to access some registers from drivers/net/ethernet/mscc/ocelot_rew.h
which are not exported in include/soc/mscc/ and a bugfix patch should
probably not move headers around.
Fixes: bdeced75b13f ("net: dsa: felix: Add PCS operations for PHYLINK")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
BCM4908 SoCs family uses Ethernel controller that includes UniMAC but
uses different DMA engine (than other controllers) and requires
different programming.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is nowhere used in the kernel. It also seems to be lacking the
proper fiber advertise flags. Remove it.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
genphy_read_status() is already the default for the .read_status() op.
Drop the unnecessary references.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The TypeC FIA can be powered down if the TC-COLD power state is allowed,
so block the TC-COLD state when initializing the FIA.
Note that this isn't needed on ICL where the FIA is never modular and
which has no generic way to block TC-COLD (except for platforms with a
legacy TypeC port and on those too only via these legacy ports, not via
a DP-alt/TBT port).
Cc: <stable@vger.kernel.org> # v5.10+
Cc: José Roberto de Souza <jose.souza@intel.com>
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3027
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208154303.6839-1-imre.deak@intel.com
Reviewed-by: Jos� Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit f48993e5d26b079e8c80fff002499a213dbdb1b4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Fix checkpatch.pl CHECK:
CHECK: Please don't use multiple blank lines
Signed-off-by: Aakash Hemadri <aakashhemadri123@gmail.com>
Link: https://lore.kernel.org/r/20210209153709.128676-1-aakashhemadri123@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove typedefs from include/rtl8723b_recv.h and convert one usage in
hal/rtl8723bs_recv.c to use the actual structure name in its pointer
declaration. Fixes two checkpatch warnings.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210209141051.4739-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
Simplify i2c acess in OP-TEE driver
* tag 'optee-simplify-i2c-access_for-v5.12' of git://git.linaro.org/people/jens.wiklander/linux-tee:
optee: simplify i2c access
Link: https://lore.kernel.org/soc/20210208125853.GA288348%40jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Rearrange the code in acpi_check_resource_conflict() so as to drop
redundant checks and uneeded local variables from there and modify
the messages printed by that function to be more concise and
hopefully easier to understand.
While at it, replace direct printk() usage with pr_*().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Pull devfreq changes for v5.12 from Chanwoo Choi:
"- Correct the spelling of comment in devfreq core
- Replace devfreq->dev.parent with dev in devfreq core
- Remove unneeded simicolon in rk3399_dmc.c"
* tag 'devfreq-next-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: rk3399_dmc: Remove unneeded semicolon
PM / devfreq: Replace devfreq->dev.parent as dev in devfreq_add_device
PM / devfreq: Correct spelling in a comment
|
|
Remove unnecessary blank line, and move close of multiple-line comments
to their own trailing lines. This fixes four checkpatch warnings and one
checkpatch check notice for the include/rtl8723b_hal.h file.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210209120641.3964-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The to_usb_serial_port() macro is implemented using container_of() so
there's no need to check for NULL.
Note that neither bus match() or probe() is ever called with a NULL
struct device pointer so the checks weren't just misplaced.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
All usb_serial drivers return 0 in their remove callbacks and driver
core ignores the value returned by usb_serial_device_remove(). So change
the remove callback to return void and return 0 unconditionally in
usb_serial_device_remove().
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210208143149.963644-2-uwe@kleine-koenig.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
In a bus remove function the passed device is always valid, so there is
no need to check for it being NULL.
(Side note: The check for port being non-NULL is broken anyhow, because
to_usb_serial_port() is a wrapper around container_of() for a member that is
not the first one. So port can hardly become NULL.)
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210208143149.963644-1-uwe@kleine-koenig.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v5.12 merge window
This includes following Thunderbolt/USB4 changes for v5.12 merge
window:
* Start lane initialization after sleep for Thunderbolt 3 compatible
devices
* Add support for de-authorizing PCIe tunnels (software based
connection manager only)
* Add support for new ACPI 6.4 USB4 _OSC
* Allow disabling XDomain protocol
* Add support for new SL5 security level
* Clean up kernel-docs to pass W=1 builds
* A couple of cleanups and minor fixes
All these have been in linux-next without reported issues.
* tag 'thunderbolt-for-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (27 commits)
thunderbolt: Add support for native USB4 _OSC
ACPI: Add support for native USB4 control _OSC
ACPI: Execute platform _OSC also with query bit clear
thunderbolt: Allow disabling XDomain protocol
thunderbolt: Add support for PCIe tunneling disabled (SL5)
thunderbolt: dma_test: Drop unnecessary include
thunderbolt: Add clarifying comments about USB4 terms router and adapter
thunderbolt: switch: Fix kernel-doc descriptions of non-static functions
thunderbolt: nhi: Fix kernel-doc descriptions of non-static functions
thunderbolt: path: Fix kernel-doc descriptions of non-static functions
thunderbolt: eeprom: Fix kernel-doc descriptions of non-static functions
thunderbolt: ctl: Fix kernel-doc descriptions of non-static functions
thunderbolt: switch: Fix function name in the header
thunderbolt: tunnel: Fix misspelling of 'receive_path'
thunderbolt: icm: Fix a couple of formatting issues
thunderbolt: switch: Demote a bunch of non-conformant kernel-doc headers
thunderbolt: tb: Kernel-doc function headers should document their parameters
thunderbolt: nhi: Demote some non-conformant kernel-doc headers
thunderbolt: xdomain: Fix 'tb_unregister_service_driver()'s 'drv' param
thunderbolt: eeprom: Demote non-conformant kernel-doc headers to standard comment blocks
...
|
|
Fix the following coccicheck warnings:
./drivers/usb/gadget/udc/udc-xilinx.c:846:1-17: WARNING: Assignment of
0/1 to bool variable.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1612678696-15794-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit a079973f462a ("usb: typec: tcpm: Remove tcpc_config
configuration mechanism") removed the tcpc_config which includes the
Sink VDO and it is not yet added back with fwnode. Add it now.
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210205033415.3320439-8-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
VDM header now requires SVDM Version. Get it from typec_partner.
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210205033415.3320439-6-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch implements the following requirement in the Spec.
PD Spec Revision 3.0 Version 2.0 + ECNs 2020-12-10
6.4.4.2.3 Structured VDM Version
"The Structured VDM Version field of the Discover Identity Command
sent and received during VDM discovery Shall be used to determine the
lowest common Structured VDM Version supported by the Port Partners or
Cable Plug and Shall continue to operate using this Specification
Revision until they are Detached."
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210205033415.3320439-5-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
PD Spec Revision 3.0 Version 2.0 + ECNs 2020-12-10
6.4.4.2.3 Structured VDM Version
"The Structured VDM Version field of the Discover Identity Command
sent and received during VDM discovery Shall be used to determine the
lowest common Structured VDM Version supported by the Port Partners or
Cable Plug and Shall continue to operate using this Specification
Revision until they are Detached."
Also clear the fields newly defined in SVDM version 2.0 if the
negotiated SVDM version is 1.0.
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210205033415.3320439-4-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
PD Rev 3.0 introduces SVDM Version 2.0. This patch makes the field
configuable in the header in order to be able to be compatible with
older SVDM version.
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210205033415.3320439-3-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
PD Spec Revision 3.0 Version 2.0 + ECNs 2020-12-10
6.4.4.2.3 Structured VDM Version
"The Structured VDM Version field of the Discover Identity Command
sent and received during VDM discovery Shall be used to determine the
lowest common Structured VDM Version supported by the Port Partners or
Cable Plug and Shall continue to operate using this Specification
Revision until they are Detached."
Add a variable in typec_capability to specify the highest SVDM version
supported by the port and another variable in typec_partner to cache the
negotiated SVDM version between the port and the partner.
Also add setter/getter functions for the negotiated SVDM version.
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210205033415.3320439-2-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The usage of in_interrupt() in drivers is phased out for various
reasons.
In both exported functions where BUG_ON(in_interrupt()) is invoked,
there is a mutex_lock() afterwards. mutex_lock() contains a
might_sleep() which will already trigger a stack trace if the target
functions is called from atomic context.
Remove the BUG_ON() and add a "Context: " in the kernel-doc instead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20210208181615.381861-3-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
reset_vc() uses a "!in_interrupt()" conditional before resetting the
palettes, which is a blocking operation. Since commit
8b6312f4dcc1e ("[PATCH] vt: refactor console SAK processing")
all calls are invoked from a workqueue process context, with the
blocking console lock always acquired.
Remove the "!in_interrupt()" check.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20210208181615.381861-2-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently we use bitmap_alloc() to allocate msi bitmap which should be
initialized with zero. This is obviously wrong but it works because msi
can fallback to legacy interrupt mode. So use bitmap_zalloc() instead.
Fixes: 632dcc2c75ef6de3272aa ("irqchip: Add Loongson PCH MSI controller")
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210209071051.2078435-1-chenhuacai@loongson.cn
|
|
The dep->interval captures the number of frames/microframes per interval
from bInterval. Fullspeed interrupt endpoint bInterval is the number of
frames per interval and not 2^(bInterval - 1). So fix it here. This
change is only for debugging purpose and should not affect the interrupt
endpoint operation.
Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/1263b563dedc4ab8b0fb854fba06ce4bc56bd495.1612820995.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Valid range for DEPCFG.bInterval_m1 is from 0 to 13, and it must be set
to 0 when the controller operates in full-speed. See the programming
guide for DEPCFG command section 3.2.2.1 (v3.30a).
Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/3f57026f993c0ce71498dbb06e49b3a47c4d0265.1612820995.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next
Peter writes:
In v5.12-rc1, it adds cdnsp drivers for Cadence USB3 Family,
it is different UDC driver with current cdns3 driver.
* tag 'usb-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: (23 commits)
usb: cdnsp: Removes some useless trace events
usb: cdns3: Add support for TI's AM64 SoC
usb: cdnsp: fixes undefined reference to cdns_remove
usb: cdns3: Adds missing __iomem markers
usb: cdnsp: Fix for undefined reference to `usb_hcd_is_primary_hcd'
usb: cdnsp: Fixes for sparse warnings
usb: cdns3: Fixes for sparse warnings
usb: cdnsp: fix error handling in cdnsp_mem_init()
usb: cdns3: Removes xhci_cdns3_suspend_quirk from host-export.h
usb: cdnsp: Removes some not useful function arguments
usb: cdns3: fix warning when USB_CDNS_HOST is not set
usb: cdns3: fix build when PM_SLEEP is not set
usb: cdnsp: Mark cdnsp_gadget_ops with static keyword
MAINTAINERS: add Cadence USBSSP DRD IP driver entry
usb: cdns3: Change file names for cdns3 driver.
usb: cdnsp: Add tracepoints for CDNSP driver
usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver
usb: cdnsp: Device side header file for CDNSP driver
usb: cdns3: Changed type of gadget_dev in cdns structure
usb: cdns3: Refactoring names in reusable code
...
|
|
Remove braces from both occurences of single line if blocks in
include/rtw_mlme.h, fixes two checkpatch warnings, thus clearing
this type of warning from this file.
Also swaps two if statement comparisons around, so the variable is on
the left in each one. This fixes two warnings also.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210209001043.165080-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add braces to both branches of an if block for consistency, and also
remove braces from a single line for loop. Fixes a checkpatch check
and warning, thus clearing this file of any brace check/warning
notices.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210209001153.165135-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the following type of checkpatch warning:
"WARNING: struct phy_ops should normally be const"
Signed-off-by: Atul Gopinathan <leoatul12@gmail.com>
Link: https://lore.kernel.org/r/20210209081935.3084-2-leoatul12@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the following type of checkpatch error:
"ERROR: code indent should use tabs where possible"
Signed-off-by: Atul Gopinathan <leoatul12@gmail.com>
Link: https://lore.kernel.org/r/20210209081935.3084-1-leoatul12@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for CQM RSSI measurement reporting and advertise the
NL80211_EXT_FEATURE_CQM_RSSI_LIST feature. This enables a userspace
supplicant such as iwd to be notified of changes in the RSSI for roaming
and signal monitoring purposes.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210208125738.3546557-1-alsi@bang-olufsen.dk
|
|
FW reports Tx/Rx extended MCS 12.1 to driver as "26". Driver will
convert this into base MCS 7 + EXTENDED_SC_DMG flag so kernel can do
the correct phy rate conversion. Also add log prints to print "12.1"
instead of "26" for extended MCS.
Signed-off-by: Max Chen <mxchen@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1609977050-7089-3-git-send-email-mxchen@codeaurora.org
|
|
Add new level ATH10K_DBG_STA debug_mask for printing
sta related logs. This will be useful to check the
debug logs of connection and changes related to
station.
Tested-on: QCA9984 hw1.0 PCI 10.4-3.9.0.2-00021
Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1612463738-16542-1-git-send-email-tamizhr@codeaurora.org
|
|
Multiple structures in the carl9170 driver have alignment
impossible alignment constraints that gcc warns about when
building with 'make W=1':
drivers/net/wireless/ath/carl9170/fwcmd.h:243:2: warning: alignment 1 of 'union <anonymous>' is less than 4 [-Wpacked-not-aligned]
drivers/net/wireless/ath/carl9170/wlan.h:373:1: warning: alignment 1 of 'struct ar9170_rx_frame_single' is less than 2 [-Wpacked-not-aligned]
In the carl9170_cmd structure, multiple members that have an explicit
alignment requirement of four bytes are added into a union with explicit
byte alignment, but this in turn is part of a structure that also has
four-byte alignment.
In the wlan.h header, multiple structures contain a ieee80211_hdr member
that is required to be two-byte aligned to avoid alignmnet faults when
processing network headers, but all members are forced to be byte-aligned
using the __packed tag at the end of the struct definition.
In both cases, leaving out the packing does not change the internal
layout of the structure but changes the alignment constraint of the
structure itself.
Change all affected structures to only apply packing where it does
not violate the alignment requirement of the contained structure.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210204162926.3262598-1-arnd@kernel.org
|
|
Deleting BA session was not correcly performed, causing communication
issues with APs that dynamically stop/start new BA sessions.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1611328304-1010-1-git-send-email-loic.poulain@linaro.org
|
|
Tx descriptor search index field should be updated with hw peer id
and not by AST Hash as per the HW/FW recommendation. Incorrect search
index causes throughput degradation in all scenario for all the
platforms. so updated the search index field with hw peer id, which
is a common change applicable for all the platforms. Also no need of these
configuration for non station type. seen 10% throughput increase in WDS
traffic with this change.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1612410960-9120-1-git-send-email-periyasa@codeaurora.org
|
|
ath10k_debug_fw_stats_request just be called with conf_mutex held,
otherwise the following warning is seen when lock debugging is enabled:
WARNING: CPU: 0 PID: 793 at drivers/net/wireless/ath/ath10k/debug.c:357 ath10k_debug_fw_stats_request+0x12c/0x133 [ath10k_core]
Modules linked in: snd_hda_codec_hdmi designware_i2s snd_hda_intel snd_intel_dspcfg snd_hda_codec i2c_piix4 snd_hwdep snd_hda_core acpi_als kfifo_buf industrialio snd_soc_max98357a snd_soc_adau7002 snd_soc_acp_da7219mx98357_mach snd_soc_da7219 acp_audio_dma ccm xt_MASQUERADE fuse ath10k_pci ath10k_core lzo_rle ath lzo_compress mac80211 zram cfg80211 r8152 mii joydev
CPU: 0 PID: 793 Comm: wpa_supplicant Tainted: G W 5.10.9 #5
Hardware name: HP Grunt/Grunt, BIOS Google_Grunt.11031.104.0 09/05/2019
RIP: 0010:ath10k_debug_fw_stats_request+0x12c/0x133 [ath10k_core]
Code: 1e bb a1 ff ff ff 4c 89 ef 48 c7 c6 d3 31 2e c0 89 da 31 c0 e8 bd f8 ff ff 89 d8 eb 02 31 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 <0f> 0b e9 04 ff ff ff 0f 1f 44 00 00 55 48 89 e5 41 56 53 48 89 fb
RSP: 0018:ffffb2478099f7d0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff9e432700cce0 RCX: 11c85cfd6b8e3b00
RDX: ffff9e432700cce0 RSI: ffff9e43127c5668 RDI: ffff9e4318deddf0
RBP: ffffb2478099f7f8 R08: 0000000000000002 R09: 00000003fd7068cc
R10: ffffffffc01b2749 R11: ffffffffc029efaf R12: ffff9e432700c000
R13: ffff9e43127c33e0 R14: ffffb2478099f918 R15: ffff9e43127c33e0
FS: 00007f7ea48e2740(0000) GS:ffff9e432aa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000059aa799ddf38 CR3: 0000000118de2000 CR4: 00000000001506f0
Call Trace:
ath10k_sta_statistics+0x4d/0x270 [ath10k_core]
sta_set_sinfo+0x1be/0xaec [mac80211]
ieee80211_get_station+0x58/0x76 [mac80211]
rdev_get_station+0xf1/0x11e [cfg80211]
nl80211_get_station+0x7f/0x146 [cfg80211]
genl_rcv_msg+0x32e/0x35e
? nl80211_stop_ap+0x19/0x19 [cfg80211]
? nl80211_get_station+0x146/0x146 [cfg80211]
? genl_rcv+0x19/0x36
? genl_rcv+0x36/0x36
netlink_rcv_skb+0x89/0xfb
genl_rcv+0x28/0x36
netlink_unicast+0x169/0x23b
netlink_sendmsg+0x38a/0x402
sock_sendmsg+0x72/0x76
____sys_sendmsg+0x153/0x1cc
? copy_msghdr_from_user+0x5d/0x85
___sys_sendmsg+0x7c/0xb5
? lock_acquire+0x181/0x23d
? syscall_trace_enter+0x15e/0x160
? find_held_lock+0x3d/0xb2
? syscall_trace_enter+0x15e/0x160
? sched_clock_cpu+0x15/0xc6
__sys_sendmsg+0x62/0x9a
do_syscall_64+0x43/0x55
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 4913e675630e ("ath10k: enable rx duration report default for wmi tlv")
Signed-off-by: Anand K Mistry <amistry@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210202144033.1.I9e556f9fb1110d58c31d04a8a1293995fb8bb678@changeid
|
|
ath10k_wmi_tlv_parse_peer_stats_info()
The ieee80211_find_sta_by_ifaddr call in
ath10k_wmi_tlv_parse_peer_stats_info must be called while holding the
RCU read lock. Otherwise, the following warning will be seen when RCU
usage checking is enabled:
=============================
WARNING: suspicious RCU usage
5.10.3 #8 Tainted: G W
-----------------------------
include/linux/rhashtable.h:594 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
no locks held by ksoftirqd/1/16.
stack backtrace:
CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G W 5.10.3 #8
Hardware name: HP Grunt/Grunt, BIOS Google_Grunt.11031.104.0 09/05/2019
Call Trace:
dump_stack+0xab/0x115
sta_info_hash_lookup+0x71/0x1e9 [mac80211]
? lock_is_held_type+0xe6/0x12f
? __kasan_kmalloc+0xfb/0x112
ieee80211_find_sta_by_ifaddr+0x12/0x61 [mac80211]
ath10k_wmi_tlv_parse_peer_stats_info+0xbd/0x10b [ath10k_core]
ath10k_wmi_tlv_iter+0x8b/0x1a1 [ath10k_core]
? ath10k_wmi_tlv_iter+0x1a1/0x1a1 [ath10k_core]
ath10k_wmi_tlv_event_peer_stats_info+0x103/0x13b [ath10k_core]
ath10k_wmi_tlv_op_rx+0x722/0x80d [ath10k_core]
ath10k_htc_rx_completion_handler+0x16e/0x1d7 [ath10k_core]
ath10k_pci_process_rx_cb+0x116/0x22c [ath10k_pci]
? ath10k_htc_process_trailer+0x332/0x332 [ath10k_core]
? _raw_spin_unlock_irqrestore+0x34/0x61
? lockdep_hardirqs_on+0x8e/0x12e
ath10k_ce_per_engine_service+0x55/0x74 [ath10k_core]
ath10k_ce_per_engine_service_any+0x76/0x84 [ath10k_core]
ath10k_pci_napi_poll+0x49/0x141 [ath10k_pci]
net_rx_action+0x11a/0x347
__do_softirq+0x2d3/0x539
run_ksoftirqd+0x4b/0x86
smpboot_thread_fn+0x1d0/0x2ab
? cpu_report_death+0x7f/0x7f
kthread+0x189/0x191
? cpu_report_death+0x7f/0x7f
? kthread_blkcg+0x31/0x31
ret_from_fork+0x22/0x30
Fixes: 0f7cb26830a6e ("ath10k: add rx bitrate report for SDIO")
Signed-off-by: Anand K Mistry <amistry@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210202134451.1.I0d2e83c42755671b7143504b62787fd06cd914ed@changeid
|
|
The sdebug_q_arr pointer must be freed when the module is unloaded.
$ cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff888e1cfb0000 (size 4096):
comm "modprobe", pid 165555, jiffies 4325987516 (age 685.194s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000458f4f5d>] 0xffffffffc06702d9
[<000000003edc4b1f>] do_one_initcall+0xe9/0x57d
[<00000000da7d518c>] do_init_module+0x1d1/0x6f0
[<000000009a6a9248>] load_module+0x36bd/0x4f50
[<00000000ddb0c3ce>] __do_sys_init_module+0x1db/0x260
[<000000009532db57>] do_syscall_64+0xa5/0x420
[<000000002916b13d>] entry_SYSCALL_64_after_hwframe+0x6a/0xdf
Fixes: 87c715dcde63 ("scsi: scsi_debug: Add per_host_store option")
Link: https://lore.kernel.org/r/20210208111734.34034-1-mlombard@redhat.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When attempting to link XDP prog with MTU larger than supported,
user is not informed why XDP linking fails. Adding proper
error message: "MTU too large to enable XDP".
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Consolidate the actions performed on the packet based on the XDP
program result into a separate function that is easier to read and
maintain. Simplify the i40e_construct_skb_zc function, so that the
input xdp buffer is always freed, regardless of whether the output
skb is successfully created or not. Simplify the behavior of the
i40e_clean_rx_irq_zc function, so that the current packet descriptor
is dropped when function i40_construct_skb_zc returns an error as
opposed to re-processing the same description on the next invocation.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
For performance reasons, remove the redundant buffer info updates
(*bi = NULL). The buffers ready to be cleaned can easily be tracked
based on the ring next-to-clean variable, which is consistently
updated.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
For performance reasons, remove the redundant updates of the cleaned_count
variable, as its value can be computed based on the ring next-to-clean
variable, which is consistently updated.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
For performance reasons, avoid writing the ring next-to-clean pointer
value back to memory on every update, as it is not really necessary.
Instead, simply read it at initialization into a local copy, update
the local copy as necessary and write the local copy back to memory
after the last update.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and route insertion
fails, FIB abort is triggered.
After aborting, set the appropriate hardware flag to make the kernel emit
RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED flag.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add "fail_route_offload" flag to disallow offloading routes.
It is needed to test "offload failed" notifications.
Create the flag as part of nsim_fib_create() under fib directory and set
it to false by default.
When FIB_EVENT_ENTRY_{REPLACE, APPEND} are triggered and
"fail_route_offload" value is true, set the appropriate hardware flag to
make the kernel emit RTM_NEWROUTE notification with RTM_F_OFFLOAD_FAILED
flag.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Initialize the dummy FIB offload module after debugfs, so that the FIB
module could create its own directory there.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
