| Age | Commit message (Collapse) | Author |
|---|
|
Capacity is stranded when CFMWS regions are not aligned to block size. On
x86, block size increases with capacity (2G blocks @ 64G capacity).
Use CFMWS base/size to report memory block size alignment advice.
Link: https://lkml.kernel.org/r/20250127153405.3379117-4-gourry@gourry.net
Signed-off-by: Gregory Price <gourry@gourry.net>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Bruno Faccini <bfaccini@nvidia.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rrichter@amd.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "memory,x86,acpi: hotplug memory alignment advisement", v8.
When physical address regions are not aligned to memory block size, the
misaligned portion is lost (stranded capacity).
Block size (min/max/selected) is architecture defined. Most architectures
tend to use the minimum block size or some simplistic heurist. On x86,
memory block size increases up to 2GB, and is otherwise fitted to the
alignment of non-hotplug (i.e. not special purpose memory).
CXL exposes its memory for management through the ACPI CEDT (CXL Early
Detection Table) in a field called the CXL Fixed Memory Window. Per the
CXL specification, this memory must be aligned to at least 256MB.
When a CFMW aligns on a size less than the block size, this causes a loss
of up to 2GB per CFMW on x86. It is not uncommon for CFMW to be allocated
per-device - though this behavior is BIOS defined.
This patch set provides 3 things:
1) implement advise/query functions in driverse/base/memory.c to
report/query architecture agnostic hotplug block alignment advice.
2) update x86 memblock size logic to consider the hotplug advice
3) add code in acpi/numa/srat.c to report CFMW alignment advice
The advisement interfaces are design to be called during arch_init code
prior to allocator and smp_init. start_kernel will call these through
setup_arch() (via acpi and mm/init_64.c on x86), which occurs prior to
mm_core_init and smp_init - so no need for atomics.
There's an attempt to signal callers to advise() that query has already
occurred, but this is predicated on the notion that query actually occurs
(which presently only happens on the x86 arch). This is to assist
debugging future users. Otherwise, the advise() call has been marked
__init to help static discovery of bad call times.
Once query is called the first time, it will always return the same value.
Interfaces return -EBUSY and 0 respectively on systems without hotplug.
This patch (of 3):
Hotplug memory sources may have opinions on what the memblock size should
be - usually for alignment purposes. For example, CXL memory extents can
be 256MB with a matching alignment. If this size/alignment is smaller
than the block size, it can result in stranded capacity.
Implement memory_block_advise_max_size for use prior to allocator init,
for software to advise the system on the max block size.
Implement memory_block_probe_max_size for use by arch init code to
calculate the best block size. Use of advice is architecture defined.
The probe value can never change after first probe. Calls to advise after
probe will return -EBUSY to aid debugging.
On systems without hotplug, always return -ENODEV and 0 respectively.
Link: https://lkml.kernel.org/r/20250127153405.3379117-1-gourry@gourry.net
Link: https://lkml.kernel.org/r/20250127153405.3379117-2-gourry@gourry.net
Signed-off-by: Gregory Price <gourry@gourry.net>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Bruno Faccini <bfaccini@nvidia.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Robert Richter <rrichter@amd.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, zsmalloc, zswap's and zram's backend memory allocator, does not
enforce any policy for the allocation of memory for the compressed data,
instead just adopting the memory policy of the task entering reclaim, or
the default policy (prefer local node) if no such policy is specified.
This can lead to several pathological behaviors in multi-node NUMA
systems:
1. Systems with CXL-based memory tiering can encounter the following
inversion with zswap/zram: the coldest pages demoted to the CXL tier
can return to the high tier when they are reclaimed to compressed swap,
creating memory pressure on the high tier.
2. Consider a direct reclaimer scanning nodes in order of allocation
preference. If it ventures into remote nodes, the memory it compresses
there should stay there. Trying to shift those contents over to the
reclaiming thread's preferred node further *increases* its local
pressure, and provoking more spills. The remote node is also the most
likely to refault this data again. This undesirable behavior was
pointed out by Johannes Weiner in [1].
3. For zswap writeback, the zswap entries are organized in
node-specific LRUs, based on the node placement of the original pages,
allowing for targeted zswap writeback for specific nodes.
However, the compressed data of a zswap entry can be placed on a
different node from the LRU it is placed on. This means that reclaim
targeted at one node might not free up memory used for zswap entries in
that node, but instead reclaiming memory in a different node.
All of these issues will be resolved if the compressed data go to the same
node as the original page. This patch encourages this behavior by having
zswap and zram pass the node of the original page to zsmalloc, and have
zsmalloc prefer the specified node if we need to allocate new (zs)pages
for the compressed data.
Note that we are not strictly binding the allocation to the preferred
node. We still allow the allocation to fall back to other nodes when the
preferred node is full, or if we have zspages with slots available on a
different node. This is OK, and still a strict improvement over the
status quo:
1. On a system with demotion enabled, we will generally prefer
demotions over compressed swapping, and only swap when pages have
already gone to the lowest tier. This patch should achieve the desired
effect for the most part.
2. If the preferred node is out of memory, letting the compressed data
going to other nodes can be better than the alternative (OOMs, keeping
cold memory unreclaimed, disk swapping, etc.).
3. If the allocation go to a separate node because we have a zspage
with slots available, at least we're not creating extra immediate
memory pressure (since the space is already allocated).
3. While there can be mixings, we generally reclaim pages in same-node
batches, which encourage zspage grouping that is more likely to go to
the right node.
4. A strict binding would require partitioning zsmalloc by node, which
is more complicated, and more prone to regression, since it reduces the
storage density of zsmalloc. We need to evaluate the tradeoff and
benchmark carefully before adopting such an involved solution.
[1]: https://lore.kernel.org/linux-mm/20250331165306.GC2110528@cmpxchg.org/
[senozhatsky@chromium.org: coding-style fixes]
Link: https://lkml.kernel.org/r/mnvexa7kseswglcqbhlot4zg3b3la2ypv2rimdl5mh5glbmhvz@wi6bgqn47hge
Link: https://lkml.kernel.org/r/20250402204416.3435994-1-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Gregory Price <gourry@gourry.net>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: Sergey Senozhatsky <senozhatsky@chromium.org> [zram, zsmalloc]
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosry.ahmed@linux.dev> [zswap/zsmalloc]
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 ITS mitigation from Dave Hansen:
"Mitigate Indirect Target Selection (ITS) issue.
I'd describe this one as a good old CPU bug where the behavior is
_obviously_ wrong, but since it just results in bad predictions it
wasn't wrong enough to notice. Well, the researchers noticed and also
realized that thus bug undermined a bunch of existing indirect branch
mitigations.
Thus the unusually wide impact on this one. Details:
ITS is a bug in some Intel CPUs that affects indirect branches
including RETs in the first half of a cacheline. Due to ITS such
branches may get wrongly predicted to a target of (direct or indirect)
branch that is located in the second half of a cacheline. Researchers
at VUSec found this behavior and reported to Intel.
Affected processors:
- Cascade Lake, Cooper Lake, Whiskey Lake V, Coffee Lake R, Comet
Lake, Ice Lake, Tiger Lake and Rocket Lake.
Scope of impact:
- Guest/host isolation:
When eIBRS is used for guest/host isolation, the indirect branches
in the VMM may still be predicted with targets corresponding to
direct branches in the guest.
- Intra-mode using cBPF:
cBPF can be used to poison the branch history to exploit ITS.
Realigning the indirect branches and RETs mitigates this attack
vector.
- User/kernel:
With eIBRS enabled user/kernel isolation is *not* impacted by ITS.
- Indirect Branch Prediction Barrier (IBPB):
Due to this bug indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB.
This will be fixed in the microcode.
Mitigation:
As indirect branches in the first half of cacheline are affected, the
mitigation is to replace those indirect branches with a call to thunk that
is aligned to the second half of the cacheline.
RETs that take prediction from RSB are not affected, but they may be
affected by RSB-underflow condition. So, RETs in the first half of
cacheline are also patched to a return thunk that executes the RET aligned
to second half of cacheline"
* tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftest/x86/bugs: Add selftests for ITS
x86/its: FineIBT-paranoid vs ITS
x86/its: Use dynamic thunks for indirect branches
x86/ibt: Keep IBT disabled during alternative patching
mm/execmem: Unify early execmem_cache behaviour
x86/its: Align RETs in BHB clear sequence to avoid thunking
x86/its: Add support for RSB stuffing mitigation
x86/its: Add "vmexit" option to skip mitigation on some CPUs
x86/its: Enable Indirect Target Selection mitigation
x86/its: Add support for ITS-safe return thunk
x86/its: Add support for ITS-safe indirect thunk
x86/its: Enumerate Indirect Target Selection (ITS) bug
Documentation: x86/bugs/its: Add ITS documentation
|
|
Update soc_id table for the Qualcomm SM8750 SoC to represent
SM8750 machine.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250508134635.1627031-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use a single DRIVER_VERSION for the plat, hsmp and acpi modules,
as all these modules are connected to a common functionality.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20250506101542.200811-1-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Resolve conflicts in dell/alienware-wmi-wmax and asus-wmi, and enable
applying a few amd/hsmp patches that depend on changes in the fixes
branch.
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.16-2025-05-09:
amdgpu:
- IPS fixes
- DSC cleanup
- DC Scaling updates
- DC FP fixes
- Fused I2C-over-AUX updates
- SubVP fixes
- Freesync fix
- DMUB AUX fixes
- VCN fix
- Hibernation fixes
- HDP fixes
- DCN 2.1 fixes
- DPIA fixes
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- Misc code cleanups
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
amdkfd:
- Update error messages for SDMA
- Userptr updates
drm:
- Add drm_file_err function
dma-buf:
- Add a helper to sort and deduplicate dma_fence arrays
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250509230951.3871914-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Add missed call to release adapter.
Remove wrong error pointer conversion.
Fixes: 3e75f2954116 ("platform/mellanox: mlxreg-dpu: Add initial support for Nvidia DPU")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250508203139.55171-1-vadimp@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Clang warns (or errors with CONFIG_WERROR=y):
drivers/platform/mellanox/nvsw-sn2201.c:531:32: error: variable 'nvsw_sn2201_busbar_items' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
531 | static struct mlxreg_core_item nvsw_sn2201_busbar_items[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~
nvsw_sn2201_busbar_items is only used in ARRAY_SIZE(), which uses
sizeof(), so this variable is only used at compile time. It appears that
this may be a copy and paste issue, so use nvsw_sn2201_busbar_items as
the .items member in nvsw_sn2201_busbar_hotplug, clearing up the
warning.
Fixes: 56b0bb7f9069 ("platform: mellanox: nvsw-sn2200: Add support for new system flavour")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250509-nvsw-sn2200-fix-items-busbar-hotplug-v1-1-8844fff38dc8@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc timers fixes from Ingo Molnar:
- Fix time keeping bugs in CLOCK_MONOTONIC_COARSE clocks
- Work around absolute relocations into vDSO code that GCC erroneously
emits in certain arm64 build environments
- Fix a false positive lockdep warning in the i8253 clocksource driver
* tag 'timers-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/i8253: Use raw_spinlock_irqsave() in clockevent_i8253_disable()
arm64: vdso: Work around invalid absolute relocations from GCC
timekeeping: Prevent coarse clocks going backwards
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell Precision
M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes
* tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
Input: xpad - fix two controller table values
Input: hisi_powerkey - enable system-wakeup for s2idle
Input: synaptics - enable InterTouch on Dell Precision M3800
Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5
Input: synaptics - enable InterTouch on Dynabook Portege X30L-G
Input: synaptics - enable InterTouch on Dynabook Portege X30-D
Input: synaptics - enable SMBus for HP Elitebook 850 G1
Input: mtk-pmic-keys - fix possible null pointer dereference
Input: xpad - add support for 8BitDo Ultimate 2 Wireless Controller
Input: cyttsp5 - fix power control issue on wakeup
MAINTAINERS: .mailmap: update Mattijs Korpershoek's email address
dt-bindings: mediatek,mt6779-keypad: Update Mattijs' email address
Input: stmpe-ts - use module alias instead of device table
Input: cyttsp5 - ensure minimum reset pulse width
Input: sparcspkr - avoid unannotated fall-through
input/joystick: magellan: Mark __nonstring look-up table
|
|
s/devince/device/
It's used only internally, so no any behavior changes.
Fixes: 37e0e14128e0 ("ALSA: ump: Support UMP Endpoint and Function Block parsing")
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250511141147.10246-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The pointer returned from ad4851_parse_channels_common() is incremented
internally as each channel is populated. In ad4858_parse_channels(),
the same pointer was further incremented while setting ext_scan_type
fields for each channel. This resulted in indio_dev->channels being set
to a pointer past the end of the allocated array, potentially causing
memory corruption or undefined behavior.
Fix this by iterating over the channels using an explicit index instead
of incrementing the pointer. This preserves the original base pointer
and ensures all channel metadata is set correctly.
Fixes: 6250803fe2ec ("iio: adc: ad4851: add ad485x driver")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250509101657.6742-1-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
A recent commit put one entry in the wrong place. This just moves it to the
right place.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-5-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This adds support for several new controllers, all of which include
Share buttons:
- HORI Drum controller
- PowerA Fusion Pro 4
- 8BitDo Ultimate 3-mode Controller
- Hyperkin DuchesS Xbox One controller
- PowerA MOGA XP-Ultra controller
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-4-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The Share button, if present, is always one of two offsets from the end of the
file, depending on the presence of a specific interface. As we lack parsing for
the identify packet we can't automatically determine the presence of that
interface, but we can hardcode which of these offsets is correct for a given
controller.
More controllers are probably fixable by adding the MAP_SHARE_BUTTON in the
future, but for now I only added the ones that I have the ability to test
directly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-2-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Two controllers -- Mad Catz JOYTECH NEO SE Advanced and PDP Mirror's
Edge Official -- were missing the value of the mapping field, and thus
wouldn't detect properly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-1-vi@endrift.com
Fixes: 540602a43ae5 ("Input: xpad - add a few new VID/PID combinations")
Fixes: 3492321e2e60 ("Input: xpad - add multiple supported devices")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
To wake up the system from s2idle when pressing the power-button, let's
convert from using pm_wakeup_event() to pm_wakeup_dev_event(), as it allows
us to specify the "hard" in-parameter, which needs to be set for s2idle.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250306115021.797426-1-ulf.hansson@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Fix unbalanced PM in error path of `atmel_qspi_probe()`
by using `devm_pm_runtime_*()` functions.
Reported-by: Alexander Dahl <ada@thorsis.com>
Closes: https://lore.kernel.org/linux-spi/20250110-paycheck-irregular-bcddab1276c7@thorsis.com/
Fixes: 5af42209a4d2 ("spi: atmel-quadspi: Add support for sama7g5 QSPI")
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20250327195928.680771-4-csokas.bence@prolan.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It was decided this was supported after all, so remove
the restriction.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-15-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
add support for remain on channel on BSS vif for iwlmld.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-14-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
If one of the stages in starting a ROC failed,
the ROC will not start nor end so EMLSR will stay blocked forever.
Block EMLSR once all ROC conditions are validated and
clear EMLSR blocked reasons in mld_vif cleanup.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-13-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This change reflects the correct ownership of aux_sta,
as it is not a property of the link but rather of the virtual interface.
Updated the initialization, cleanup and access logic for the aux_sta member
to align with its new location within iwl_mld_vif.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-12-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
The roc_activity member in the iwl_mld_vif structure was previously
set to zero during cleanup as was present in struct_group, which
incorrectly indicated ROC_ACTIVITY_HOTSPOT.
To fix this issue, remove roc_activity member from struct_group.
Notify mac80211 of ROC expiration during vif cleanup to maintain
synchronization between the driver and mac80211.
While on it, update it's type to enum iwl_roc_activity.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-11-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Update comments to accurately reflect the purpose of the
iwl_mld_cleanup_link and iwl_cleanup_mld functions.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-10-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
With all the cleanups now, we can rename the structure to
better indicate the functionality. For older devices this
isn't quite accurate, of course, but it's better to have a
name that reflects future use for maintenance.
Add some kernel-doc while at it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-9-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
For now, the WH and PE radios require the same config as
FM, so just add a #define for those instead of copying
the data. Since this is true, Sc/Dr/Br all used the same
configs for all RF types, but that's confusing, so now
use the defined WH/PE names for the correct combinations.
We can also now enable the unit test that ensures we have
no duplicate RF configs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-8-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
The Bz configs really should be FM for the RF, so
move that around.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-7-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This is equivalent to just the previous iwl_cfg_ma, but
really should also be used for Bz/Gf and Sc/Gf, instead
of those using EHT sizes.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-6-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Unify the HR configs to just one HR RF config. All the fields
were the same already, so this doesn't do anything.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-5-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Unify the JF configs to just one JF RF config. This can be
done because the differing fields (thermal and DCCM offsets)
won't be used for Qu MACs (and up) due to firmware support.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-4-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
This should depend on both the RF (VHT/HE/EHT support) and
the MAC (<=22000 can put multiple frames into one buffer),
so unify the config in the struct iwl_cfg to just have it
sized according to the RF, and then double it for all the
MACs starting from AX210 (So/Ty).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-3-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
In some older devices, the min/max firmware API supported by
the driver depends on the specific device, when sharing the
the same MAC (config). For most newer devices, it really is
dependent on the MAC instead, since the firmware was frozen
for certain MAC types. However, in the future we expect also
freezes for RF types there.
To handle this most generally, add an API min/max to the MAC
config and then use the narrowest range prescribed by both,
if set.
For the newer MACs since 9000, move the configuration, there
was only a freeze on MAC+RF lines so far.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix for a regression for platform devices
that is a regression from a change that went into 6.15-rc1 that
affected Pixel devices. It has been in linux-next for over a week with
no reported problems"
* tag 'driver-core-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
platform: Fix race condition during DMA configure at IOMMU probe time
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 6.15-rc6. Included in here
are:
- typec driver fixes
- usbtmc ioctl fixes
- xhci driver fixes
- cdnsp driver fixes
- some gadget driver fixes
Nothing really major, just all little stuff that people have reported
being issues. All of these have been in linux-next this week with no
reported issues"
* tag 'usb-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: dbc: Avoid event polling busyloop if pending rx transfers are inactive.
usb: xhci: Don't trust the EP Context cycle bit when moving HW dequeue
usb: usbtmc: Fix erroneous generic_read ioctl return
usb: usbtmc: Fix erroneous wait_srq ioctl return
usb: usbtmc: Fix erroneous get_stb ioctl error returns
usb: typec: tcpm: delay SNK_TRY_WAIT_DEBOUNCE to SRC_TRYWAIT transition
USB: usbtmc: use interruptible sleep in usbtmc_read
usb: cdnsp: fix L1 resume issue for RTL_REVISION_NEW_LPM version
usb: typec: ucsi: displayport: Fix NULL pointer access
usb: typec: ucsi: displayport: Fix deadlock
usb: misc: onboard_usb_dev: fix support for Cypress HX3 hubs
usb: uhci-platform: Make the clock really optional
usb: dwc3: gadget: Make gadget_wakeup asynchronous
usb: gadget: Use get_status callback to set remote wakeup capability
usb: gadget: f_ecm: Add get_status callback
usb: host: tegra: Prevent host controller crash when OTG port is used
usb: cdnsp: Fix issue with resuming from L1
usb: gadget: tegra-xudc: ACK ST_RC after clearing CTRL_RUN
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 6.15-rc6. These are:
- bcm2835-camera driver fix
- two axis-fifo driver fixes
All of these have been in linux-next for a few weeks with no reported
issues"
* tag 'staging-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: axis-fifo: Remove hardware resets for user errors
staging: axis-fifo: Correct handling of tx_fifo_depth for size validation
staging: bcm2835-camera: Initialise dev in v4l2_dev
|
|
The driver handles the case where gpu fw is not in the initrd. OTOH it
doesn't always handle the case where _some_ fw is in the initrd, but
others are not. In particular the zap fw tends to be signed with an OEM
specific key, so the paths/names differ across devices with the same
SoC/GPU, so we cannot sanely list them with MODULE_FIRMWARE().
So MODULE_FIRMWARE() just ends up causing problems without actually
solving anything. Remove them!
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/652195/
|
|
This feature is supposed to be enabled with UBWC v4 or later.
Implementations of this SKU feature an effective UBWC version of 3, so
disable it, in line with the BSP kernel.
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Fixes: 192f4ee3e408 ("drm/msm/a6xx: Add support for Adreno 7c Gen 3 gpu")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/651759/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a bunch of small driver fixes (mostly all IIO) for 6.15-rc6.
Included in here are:
- loads of tiny IIO driver fixes for reported issues
- hyperv driver fix for a much-reported and worked on sysfs ring
buffer creation bug
All of these have been in linux-next for over a week (the IIO ones for
many weeks now), with no reported issues"
* tag 'char-misc-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Drivers: hv: Make the sysfs node size for the ring buffer dynamic
uio_hv_generic: Fix sysfs creation path for ring buffer
iio: adis16201: Correct inclinometer channel resolution
iio: adc: ad7606: fix serial register access
iio: pressure: mprls0025pa: use aligned_s64 for timestamp
iio: imu: adis16550: align buffers for timestamp
staging: iio: adc: ad7816: Correct conditional logic for store mode
iio: adc: ad7266: Fix potential timestamp alignment issue.
iio: adc: ad7768-1: Fix insufficient alignment of timestamp.
iio: adc: dln2: Use aligned_s64 for timestamp
iio: accel: adxl355: Make timestamp 64-bit aligned using aligned_s64
iio: temp: maxim-thermocouple: Fix potential lack of DMA safe buffer.
iio: chemical: pms7003: use aligned_s64 for timestamp
iio: chemical: sps30: use aligned_s64 for timestamp
iio: imu: inv_mpu6050: align buffer for timestamp
iio: imu: st_lsm6dsx: Fix wakeup source leaks on device unbind
iio: adc: qcom-spmi-iadc: Fix wakeup source leaks on device unbind
iio: accel: fxls8962af: Fix wakeup source leaks on device unbind
iio: adc: ad7380: fix event threshold shift
iio: hid-sensor-prox: Fix incorrect OFFSET calculation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- omap: use correct function to read from device tree
- MAINTAINERS: remove Seth from ISMT maintainership
* tag 'i2c-for-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Remove entry for Seth Heasley
i2c: omap: fix deprecated of_property_read_bool() use
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A fix for the xenbus driver allowing to use a PVH Dom0 with
Xenstore running in another domain
- A fix for the xenbus driver addressing a rare race condition
resulting in NULL dereferences and other problems
- A fix for the xen-swiotlb driver fixing a problem seen on Arm
platforms
* tag 'for-linus-6.15a-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xenbus: Use kref to track req lifetime
xenbus: Allow PVH dom0 a non-local xenstore
xen: swiotlb: Use swiotlb bouncing if kmalloc allocation demands it
|
|
'subvariant_id' is an enum, thus cast of pointer on 64-bit compile test
with clang and W=1 causes:
da9121-regulator.c:1132:24: error: cast to smaller integer type 'enum da9121_subvariant' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250509142448.257199-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This corrects the type and suppresses sparse warnings about passing
plain integers as NULL pointer.
Fixes: 621ba4d9f6db ("clk: rockchip: Support MMC clocks in GRF region")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505100302.YVtB1zhF-lkp@intel.com/
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250510075248.34006-2-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The kernel test robot reports the following error when building on
Hexagon with hexagon-allmodconfig.
ERROR: modpost: "__hexagon_divdi3"
[drivers/media/platform/amlogic/c3/mipi-csi2/c3-mipi-csi2.ko] undefined!
The error is caused by using DIV_ROUND_UP() with a 64 bits divisor with
a 32-bit dividend, which on Hexagon and clang-17 is resolved with a call
to the __hexagon_divdi3() helper function, part of the compiler support
library and not available when building Linux.
Use DIV_ROUND_UP_ULL() to fix the build error and avoid calling the
__hexagon_divdi3() helper function.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505101334.UHxNcUUO-lkp@intel.com/
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
Small TEE updates for v6.16
- Remove an unnecessary NULL check before release_firmware() in the
OP-TEE driver
- Prevent a size wrap in the TEE subsystem. The wrap would have been caught
later in the code so no security consequences.
* tag 'tee-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: Prevent size calculation wraparound on 32-bit kernels
tee: optee: smc: remove unnecessary NULL check before release_firmware()
Link: https://lore.kernel.org/r/20250509065114.GA4188600@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
It's no longer used and can be removed, also remove the field
'gendisk->sync_io'.
Link: https://lore.kernel.org/linux-raid/20250506124903.2540268-10-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
|
|
If sync_speed is above speed_min, then is_mddev_idle() will be called
for each sync IO to check if the array is idle, and inflight sync_io
will be limited if the array is not idle.
However, while mkfs.ext4 for a large raid5 array while recovery is in
progress, it's found that sync_speed is already above speed_min while
lots of stripes are used for sync IO, causing long delay for mkfs.ext4.
Root cause is the following checking from is_mddev_idle():
t1: submit sync IO: events1 = completed IO - issued sync IO
t2: submit next sync IO: events2 = completed IO - issued sync IO
if (events2 - events1 > 64)
For consequence, the more sync IO issued, the less likely checking will
pass. And when completed normal IO is more than issued sync IO, the
condition will finally pass and is_mddev_idle() will return false,
however, last_events will be updated hence is_mddev_idle() can only
return false once in a while.
Fix this problem by changing the checking as following:
1) mddev doesn't have normal IO completed;
2) mddev doesn't have normal IO inflight;
3) if any member disks is partition, and all other partitions doesn't
have IO completed.
Also change rdev->last_events to unsigned long to cleanup type casting.
Link: https://lore.kernel.org/linux-raid/20250506124903.2540268-9-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
|
|
Currently if sync speed is above speed_min and below speed_max,
md_do_sync() will wait for all sync IOs to be done before issuing new
sync IO, means sync IO depth is limited to just 1.
This limit is too low, in order to prevent sync speed drop conspicuously
after fixing is_mddev_idle() in the next patch, add a new api for
limiting sync IO depth, the default value is 32.
Link: https://lore.kernel.org/linux-raid/20250506124903.2540268-8-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
|
|
Following patch will use gendisk to check if there are normal IO
completed or inflight, to fix a problem in mdraid that foreground IO
can be starved by background sync IO in later patches.
Link: https://lore.kernel.org/linux-raid/20250506124903.2540268-7-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
|
