summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-01-04ibmvnic: fix: NULL pointer dereference.YANG LI
The error is due to dereference a null pointer in function reset_one_sub_crq_queue(): if (!scrq) { netdev_dbg(adapter->netdev, "Invalid scrq reset. irq (%d) or msgs(%p).\n", scrq->irq, scrq->msgs); return -EINVAL; } If the expression is true, scrq must be a null pointer and cannot dereference. Fixes: 9281cf2d5840 ("ibmvnic: avoid memset null scrq msgs") Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com> Reported-by: Abaci <abaci@linux.alibaba.com> Acked-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/1609312994-121032-1-git-send-email-abaci-bugfix@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04vhost_net: fix ubuf refcount incorrectly when sendmsg failsYunjian Wang
Currently the vhost_zerocopy_callback() maybe be called to decrease the refcount when sendmsg fails in tun. The error handling in vhost handle_tx_zerocopy() will try to decrease the same refcount again. This is wrong. To fix this issue, we only call vhost_net_ubuf_put() when vq->heads[nvq->desc].len == VHOST_DMA_IN_PROGRESS. Fixes: bab632d69ee4 ("vhost: vhost TX zero-copy support") Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/1609207308-20544-1-git-send-email-wangyunjian@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04bareudp: Fix use of incorrect min_headroom sizeTaehee Yoo
In the bareudp6_xmit_skb(), it calculates min_headroom. At that point, it uses struct iphdr, but it's not correct. So panic could occur. The struct ipv6hdr should be used. Test commands: ip netns add A ip netns add B ip link add veth0 netns A type veth peer name veth1 netns B ip netns exec A ip link set veth0 up ip netns exec A ip a a 2001:db8:0::1/64 dev veth0 ip netns exec B ip link set veth1 up ip netns exec B ip a a 2001:db8:0::2/64 dev veth1 for i in {10..1} do let A=$i-1 ip netns exec A ip link add bareudp$i type bareudp dstport $i \ ethertype 0x86dd ip netns exec A ip link set bareudp$i up ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev bareudp$i ip netns exec A ip -6 r a 2001:db8:$i::2 encap ip6 src \ 2001:db8:$A::1 dst 2001:db8:$A::2 via 2001:db8:$i::2 \ dev bareudp$i ip netns exec B ip link add bareudp$i type bareudp dstport $i \ ethertype 0x86dd ip netns exec B ip link set bareudp$i up ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev bareudp$i ip netns exec B ip -6 r a 2001:db8:$i::1 encap ip6 src \ 2001:db8:$A::2 dst 2001:db8:$A::1 via 2001:db8:$i::1 \ dev bareudp$i done ip netns exec A ping 2001:db8:7::2 Splat looks like: [ 66.436679][ C2] skbuff: skb_under_panic: text:ffffffff928614c8 len:454 put:14 head:ffff88810abb4000 data:ffff88810abb3ffa tail:0x1c0 end:0x3ec0 dev:veth0 [ 66.441626][ C2] ------------[ cut here ]------------ [ 66.443458][ C2] kernel BUG at net/core/skbuff.c:109! [ 66.445313][ C2] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 66.447606][ C2] CPU: 2 PID: 913 Comm: ping Not tainted 5.10.0+ #819 [ 66.450251][ C2] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 66.453713][ C2] RIP: 0010:skb_panic+0x15d/0x15f [ 66.455345][ C2] Code: 98 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 60 8b 78 93 41 57 41 56 41 55 48 8b 54 24 20 48 8b 74 24 28 e8 b5 40 f9 ff <0f> 0b 48 8b 6c 24 20 89 34 24 e8 08 c9 98 fe 8b 34 24 48 c7 c1 80 [ 66.462314][ C2] RSP: 0018:ffff888119209648 EFLAGS: 00010286 [ 66.464281][ C2] RAX: 0000000000000089 RBX: ffff888003159000 RCX: 0000000000000000 [ 66.467216][ C2] RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed10232412c0 [ 66.469768][ C2] RBP: ffff88810a53d440 R08: ffffed102328018d R09: ffffed102328018d [ 66.472297][ C2] R10: ffff888119400c67 R11: ffffed102328018c R12: 000000000000000e [ 66.474833][ C2] R13: ffff88810abb3ffa R14: 00000000000001c0 R15: 0000000000003ec0 [ 66.477361][ C2] FS: 00007f37c0c72f00(0000) GS:ffff888119200000(0000) knlGS:0000000000000000 [ 66.480214][ C2] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 66.482296][ C2] CR2: 000055a058808570 CR3: 000000011039e002 CR4: 00000000003706e0 [ 66.484811][ C2] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 66.487793][ C2] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 66.490424][ C2] Call Trace: [ 66.491469][ C2] <IRQ> [ 66.492374][ C2] ? eth_header+0x28/0x190 [ 66.494054][ C2] ? eth_header+0x28/0x190 [ 66.495401][ C2] skb_push.cold.99+0x22/0x22 [ 66.496700][ C2] eth_header+0x28/0x190 [ 66.497867][ C2] neigh_resolve_output+0x3de/0x720 [ 66.499615][ C2] ? __neigh_update+0x7e8/0x20a0 [ 66.501176][ C2] __neigh_update+0x8bd/0x20a0 [ 66.502749][ C2] ndisc_update+0x34/0xc0 [ 66.504010][ C2] ndisc_recv_na+0x8da/0xb80 [ 66.505041][ C2] ? pndisc_redo+0x20/0x20 [ 66.505888][ C2] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 66.506965][ C2] ndisc_rcv+0x3a0/0x470 [ 66.507797][ C2] icmpv6_rcv+0xad9/0x1b00 [ 66.508645][ C2] ip6_protocol_deliver_rcu+0xcd6/0x1560 [ 66.509719][ C2] ip6_input_finish+0x5b/0xf0 [ 66.510615][ C2] ip6_input+0xcd/0x2d0 [ 66.511406][ C2] ? ip6_input_finish+0xf0/0xf0 [ 66.512327][ C2] ? rcu_read_lock_held+0x91/0xa0 [ 66.513279][ C2] ? ip6_protocol_deliver_rcu+0x1560/0x1560 [ 66.514414][ C2] ipv6_rcv+0xe8/0x300 [ ... ] Acked-by: Guillaume Nault <gnault@redhat.com> Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20201228152146.24270-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04bareudp: set NETIF_F_LLTX flagTaehee Yoo
Like other tunneling interfaces, the bareudp doesn't need TXLOCK. So, It is good to set the NETIF_F_LLTX flag to improve performance and to avoid lockdep's false-positive warning. Test commands: ip netns add A ip netns add B ip link add veth0 netns A type veth peer name veth1 netns B ip netns exec A ip link set veth0 up ip netns exec A ip a a 10.0.0.1/24 dev veth0 ip netns exec B ip link set veth1 up ip netns exec B ip a a 10.0.0.2/24 dev veth1 for i in {2..1} do let A=$i-1 ip netns exec A ip link add bareudp$i type bareudp \ dstport $i ethertype ip ip netns exec A ip link set bareudp$i up ip netns exec A ip a a 10.0.$i.1/24 dev bareudp$i ip netns exec A ip r a 10.0.$i.2 encap ip src 10.0.$A.1 \ dst 10.0.$A.2 via 10.0.$i.2 dev bareudp$i ip netns exec B ip link add bareudp$i type bareudp \ dstport $i ethertype ip ip netns exec B ip link set bareudp$i up ip netns exec B ip a a 10.0.$i.2/24 dev bareudp$i ip netns exec B ip r a 10.0.$i.1 encap ip src 10.0.$A.2 \ dst 10.0.$A.1 via 10.0.$i.1 dev bareudp$i done ip netns exec A ping 10.0.2.2 Splat looks like: [ 96.992803][ T822] ============================================ [ 96.993954][ T822] WARNING: possible recursive locking detected [ 96.995102][ T822] 5.10.0+ #819 Not tainted [ 96.995927][ T822] -------------------------------------------- [ 96.997091][ T822] ping/822 is trying to acquire lock: [ 96.998083][ T822] ffff88810f753898 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 96.999813][ T822] [ 96.999813][ T822] but task is already holding lock: [ 97.001192][ T822] ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 97.002908][ T822] [ 97.002908][ T822] other info that might help us debug this: [ 97.004401][ T822] Possible unsafe locking scenario: [ 97.004401][ T822] [ 97.005784][ T822] CPU0 [ 97.006407][ T822] ---- [ 97.007010][ T822] lock(_xmit_NONE#2); [ 97.007779][ T822] lock(_xmit_NONE#2); [ 97.008550][ T822] [ 97.008550][ T822] *** DEADLOCK *** [ 97.008550][ T822] [ 97.010057][ T822] May be due to missing lock nesting notation [ 97.010057][ T822] [ 97.011594][ T822] 7 locks held by ping/822: [ 97.012426][ T822] #0: ffff888109a144f0 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x12f7/0x2b00 [ 97.014191][ T822] #1: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020 [ 97.016045][ T822] #2: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960 [ 97.017897][ T822] #3: ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 97.019684][ T822] #4: ffffffffbce2f600 (rcu_read_lock){....}-{1:2}, at: bareudp_xmit+0x31b/0x3690 [bareudp] [ 97.021573][ T822] #5: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020 [ 97.023424][ T822] #6: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960 [ 97.025259][ T822] [ 97.025259][ T822] stack backtrace: [ 97.026349][ T822] CPU: 3 PID: 822 Comm: ping Not tainted 5.10.0+ #819 [ 97.027609][ T822] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 97.029407][ T822] Call Trace: [ 97.030015][ T822] dump_stack+0x99/0xcb [ 97.030783][ T822] __lock_acquire.cold.77+0x149/0x3a9 [ 97.031773][ T822] ? stack_trace_save+0x81/0xa0 [ 97.032661][ T822] ? register_lock_class+0x1910/0x1910 [ 97.033673][ T822] ? register_lock_class+0x1910/0x1910 [ 97.034679][ T822] ? rcu_read_lock_sched_held+0x91/0xc0 [ 97.035697][ T822] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 97.036690][ T822] lock_acquire+0x1b2/0x730 [ 97.037515][ T822] ? __dev_queue_xmit+0x1f52/0x2960 [ 97.038466][ T822] ? check_flags+0x50/0x50 [ 97.039277][ T822] ? netif_skb_features+0x296/0x9c0 [ 97.040226][ T822] ? validate_xmit_skb+0x29/0xb10 [ 97.041151][ T822] _raw_spin_lock+0x30/0x70 [ 97.041977][ T822] ? __dev_queue_xmit+0x1f52/0x2960 [ 97.042927][ T822] __dev_queue_xmit+0x1f52/0x2960 [ 97.043852][ T822] ? netdev_core_pick_tx+0x290/0x290 [ 97.044824][ T822] ? mark_held_locks+0xb7/0x120 [ 97.045712][ T822] ? lockdep_hardirqs_on_prepare+0x12c/0x3e0 [ 97.046824][ T822] ? __local_bh_enable_ip+0xa5/0xf0 [ 97.047771][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.048710][ T822] ? trace_hardirqs_on+0x41/0x120 [ 97.049626][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.050556][ T822] ? __local_bh_enable_ip+0xa5/0xf0 [ 97.051509][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.052443][ T822] ? check_chain_key+0x244/0x5f0 [ 97.053352][ T822] ? rcu_read_lock_bh_held+0x56/0xa0 [ 97.054317][ T822] ? ip_finish_output2+0x6ea/0x2020 [ 97.055263][ T822] ? pneigh_lookup+0x410/0x410 [ 97.056135][ T822] ip_finish_output2+0x6ea/0x2020 [ ... ] Acked-by: Guillaume Nault <gnault@redhat.com> Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20201228152136.24215-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04dm crypt: use GFP_ATOMIC when allocating crypto requests from softirqIgnat Korchagin
Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. In this case sometimes when allocating a new crypto request we may get a stacktrace like below: [ 210.103008][ C0] BUG: sleeping function called from invalid context at mm/mempool.c:381 [ 210.104746][ C0] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2602, name: fio [ 210.106599][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.108331][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.110212][ C0] Call Trace: [ 210.110921][ C0] <IRQ> [ 210.111527][ C0] dump_stack+0x7d/0xa3 [ 210.112411][ C0] ___might_sleep.cold+0x122/0x151 [ 210.113527][ C0] mempool_alloc+0x16b/0x2f0 [ 210.114524][ C0] ? __queue_work+0x515/0xde0 [ 210.115553][ C0] ? mempool_resize+0x700/0x700 [ 210.116586][ C0] ? crypt_endio+0x91/0x180 [ 210.117479][ C0] ? blk_update_request+0x757/0x1150 [ 210.118513][ C0] ? blk_mq_end_request+0x4b/0x480 [ 210.119572][ C0] ? blk_done_softirq+0x21d/0x340 [ 210.120628][ C0] ? __do_softirq+0x190/0x611 [ 210.121626][ C0] crypt_convert+0x29f9/0x4c00 [ 210.122668][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.123824][ C0] ? kasan_set_track+0x1c/0x30 [ 210.124858][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.125930][ C0] ? kmem_cache_free+0x104/0x470 [ 210.126973][ C0] ? crypt_endio+0x91/0x180 [ 210.127947][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.129165][ C0] blk_update_request+0x757/0x1150 [ 210.130231][ C0] blk_mq_end_request+0x4b/0x480 [ 210.131294][ C0] blk_done_softirq+0x21d/0x340 [ 210.132332][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.133289][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.134399][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.135458][ C0] __do_softirq+0x190/0x611 [ 210.136409][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.137447][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.138507][ C0] </IRQ> [ 210.139118][ C0] do_softirq_own_stack+0x37/0x40 [ 210.140191][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.141151][ C0] common_interrupt+0x74/0x120 [ 210.142171][ C0] asm_common_interrupt+0x1e/0x40 Fix this by allocating crypto requests with GFP_ATOMIC mask in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Reported-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04dm crypt: do not wait for backlogged crypto request completion in softirqIgnat Korchagin
Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") made it possible for some code paths in dm-crypt to be executed in softirq context, when the underlying driver processes IO requests in interrupt/softirq context. When Crypto API backlogs a crypto request, dm-crypt uses wait_for_completion to avoid sending further requests to an already overloaded crypto driver. However, if the code is executing in softirq context, we might get the following stacktrace: [ 210.235213][ C0] BUG: scheduling while atomic: fio/2602/0x00000102 [ 210.236701][ C0] Modules linked in: [ 210.237566][ C0] CPU: 0 PID: 2602 Comm: fio Tainted: G W 5.10.0+ #50 [ 210.239292][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 [ 210.241233][ C0] Call Trace: [ 210.241946][ C0] <IRQ> [ 210.242561][ C0] dump_stack+0x7d/0xa3 [ 210.243466][ C0] __schedule_bug.cold+0xb3/0xc2 [ 210.244539][ C0] __schedule+0x156f/0x20d0 [ 210.245518][ C0] ? io_schedule_timeout+0x140/0x140 [ 210.246660][ C0] schedule+0xd0/0x270 [ 210.247541][ C0] schedule_timeout+0x1fb/0x280 [ 210.248586][ C0] ? usleep_range+0x150/0x150 [ 210.249624][ C0] ? unpoison_range+0x3a/0x60 [ 210.250632][ C0] ? ____kasan_kmalloc.constprop.0+0x82/0xa0 [ 210.251949][ C0] ? unpoison_range+0x3a/0x60 [ 210.252958][ C0] ? __prepare_to_swait+0xa7/0x190 [ 210.254067][ C0] do_wait_for_common+0x2ab/0x370 [ 210.255158][ C0] ? usleep_range+0x150/0x150 [ 210.256192][ C0] ? bit_wait_io_timeout+0x160/0x160 [ 210.257358][ C0] ? blk_update_request+0x757/0x1150 [ 210.258582][ C0] ? _raw_spin_lock_irq+0x82/0xd0 [ 210.259674][ C0] ? _raw_read_unlock_irqrestore+0x30/0x30 [ 210.260917][ C0] wait_for_completion+0x4c/0x90 [ 210.261971][ C0] crypt_convert+0x19a6/0x4c00 [ 210.263033][ C0] ? _raw_spin_lock_irqsave+0x87/0xe0 [ 210.264193][ C0] ? kasan_set_track+0x1c/0x30 [ 210.265191][ C0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [ 210.266283][ C0] ? kmem_cache_free+0x104/0x470 [ 210.267363][ C0] ? crypt_endio+0x91/0x180 [ 210.268327][ C0] kcryptd_crypt_read_convert+0x30e/0x420 [ 210.269565][ C0] blk_update_request+0x757/0x1150 [ 210.270563][ C0] blk_mq_end_request+0x4b/0x480 [ 210.271680][ C0] blk_done_softirq+0x21d/0x340 [ 210.272775][ C0] ? _raw_spin_lock+0x81/0xd0 [ 210.273847][ C0] ? blk_mq_stop_hw_queue+0x30/0x30 [ 210.275031][ C0] ? _raw_read_lock_irq+0x40/0x40 [ 210.276182][ C0] __do_softirq+0x190/0x611 [ 210.277203][ C0] ? handle_edge_irq+0x221/0xb60 [ 210.278340][ C0] asm_call_irq_on_stack+0x12/0x20 [ 210.279514][ C0] </IRQ> [ 210.280164][ C0] do_softirq_own_stack+0x37/0x40 [ 210.281281][ C0] irq_exit_rcu+0x110/0x1b0 [ 210.282286][ C0] common_interrupt+0x74/0x120 [ 210.283376][ C0] asm_common_interrupt+0x1e/0x40 [ 210.284496][ C0] RIP: 0010:_aesni_enc1+0x65/0xb0 Fix this by making crypt_convert function reentrant from the point of a single bio and make dm-crypt defer further bio processing to a workqueue, if Crypto API backlogs a request in interrupt context. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04dm zoned: select CONFIG_CRC32Arnd Bergmann
Without crc32 support, this driver fails to link: arm-linux-gnueabi-ld: drivers/md/dm-zoned-metadata.o: in function `dmz_write_sb': dm-zoned-metadata.c:(.text+0xe98): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/md/dm-zoned-metadata.o: in function `dmz_check_sb': dm-zoned-metadata.c:(.text+0x7978): undefined reference to `crc32_le' Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04dm integrity: select CRYPTO_SKCIPHERAnthony Iliopoulos
The integrity target relies on skcipher for encryption/decryption, but certain kernel configurations may not enable CRYPTO_SKCIPHER, leading to compilation errors due to unresolved symbols. Explicitly select CRYPTO_SKCIPHER for DM_INTEGRITY, since it is unconditionally dependent on it. Signed-off-by: Anthony Iliopoulos <ailiop@suse.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04dm raid: fix discard limits for raid1Mike Snitzer
Block core warned that discard_granularity was 0 for dm-raid with personality of raid1. Reason is that raid_io_hints() was incorrectly special-casing raid1 rather than raid0. Fix raid_io_hints() by removing discard limits settings for raid1. Check for raid0 instead. Fixes: 61697a6abd24a ("dm: eliminate 'split_discard_bios' flag from DM target interface") Cc: stable@vger.kernel.org Reported-by: Zdenek Kabelac <zkabelac@redhat.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Stephan Bärwolf <stephan@matrixstorm.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-04Merge branch '5.11/scsi-postmerge' into 5.11/scsi-fixesMartin K. Petersen
Merge two commits that had dependencies on other 5.11 trees (the block and the irq trees respectively). - We reverted a megaraid_sas change in 5.10 due to missing block layer plumbing. Now that this is in place, reinstate the change. - The hisi_sas driver had a dependency on a driver core irq change that went in through Thomas' tree. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-04i2c: i801: Fix the i2c-mux gpiod_lookup_table not being properly terminatedHans de Goede
gpiod_add_lookup_table() expects the gpiod_lookup_table->table passed to it to be terminated with a zero-ed out entry. So we need to allocate one more entry then we will use. Fixes: d308dfbf62ef ("i2c: mux/i801: Switch to use descriptor passing") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-04i2c: sprd: use a specific timeout to avoid system hang up issueChunyan Zhang
If the i2c device SCL bus being pulled up due to some exception before message transfer done, the system cannot receive the completing interrupt signal any more, it would not exit waiting loop until MAX_SCHEDULE_TIMEOUT jiffies eclipse, that would make the system seemed hang up. To avoid that happen, this patch adds a specific timeout for message transfer. Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver") Signed-off-by: Linhua Xu <linhua.xu@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> [wsa: changed errno to ETIMEDOUT] Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-04Merge qcom driver fix into regulator-5.11Mark Brown
2021-01-04dmaengine: stm32-mdma: fix STM32_MDMA_VERY_HIGH_PRIORITY valueAmelie Delaunay
STM32_MDMA_VERY_HIGH_PRIORITY is b11 not 0x11, so fix it with 0x3. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210104142045.25583-1-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-04usb: gadget: configfs: Preserve function ordering after bind failureChandana Kishori Chiluveru
When binding the ConfigFS gadget to a UDC, the functions in each configuration are added in list order. However, if usb_add_function() fails, the failed function is put back on its configuration's func_list and purge_configs_funcs() is called to further clean up. purge_configs_funcs() iterates over the configurations and functions in forward order, calling unbind() on each of the previously added functions. But after doing so, each function gets moved to the tail of the configuration's func_list. This results in reshuffling the original order of the functions within a configuration such that the failed function now appears first even though it may have originally appeared in the middle or even end of the list. At this point if the ConfigFS gadget is attempted to re-bind to the UDC, the functions will be added in a different order than intended, with the only recourse being to remove and relink the functions all over again. An example of this as follows: ln -s functions/mass_storage.0 configs/c.1 ln -s functions/ncm.0 configs/c.1 ln -s functions/ffs.adb configs/c.1 # oops, forgot to start adbd echo "<udc device>" > UDC # fails start adbd echo "<udc device>" > UDC # now succeeds, but... # bind order is # "ADB", mass_storage, ncm [30133.118289] configfs-gadget gadget: adding 'Mass Storage Function'/ffffff810af87200 to config 'c'/ffffff817d6a2520 [30133.119875] configfs-gadget gadget: adding 'cdc_network'/ffffff80f48d1a00 to config 'c'/ffffff817d6a2520 [30133.119974] using random self ethernet address [30133.120002] using random host ethernet address [30133.139604] usb0: HOST MAC 3e:27:46:ba:3e:26 [30133.140015] usb0: MAC 6e:28:7e:42:66:6a [30133.140062] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 to config 'c'/ffffff817d6a2520 [30133.140081] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 --> -19 [30133.140098] configfs-gadget gadget: unbind function 'Mass Storage Function'/ffffff810af87200 [30133.140119] configfs-gadget gadget: unbind function 'cdc_network'/ffffff80f48d1a00 [30133.173201] configfs-gadget a600000.dwc3: failed to start g1: -19 [30136.661933] init: starting service 'adbd'... [30136.700126] read descriptors [30136.700413] read strings [30138.574484] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 to config 'c'/ffffff817d6a2520 [30138.575497] configfs-gadget gadget: adding 'Mass Storage Function'/ffffff810af87200 to config 'c'/ffffff817d6a2520 [30138.575554] configfs-gadget gadget: adding 'cdc_network'/ffffff80f48d1a00 to config 'c'/ffffff817d6a2520 [30138.575631] using random self ethernet address [30138.575660] using random host ethernet address [30138.595338] usb0: HOST MAC 2e:cf:43:cd:ca:c8 [30138.597160] usb0: MAC 6a:f0:9f:ee:82:a0 [30138.791490] configfs-gadget gadget: super-speed config #1: c Fix this by reversing the iteration order of the functions in purge_config_funcs() when unbinding them, and adding them back to the config's func_list at the head instead of the tail. This ensures that we unbind and unwind back to the original list order. Fixes: 88af8bbe4ef7 ("usb: gadget: the start of the configfs interface") Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Reviewed-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20201229224443.31623-1-jackp@codeaurora.org Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-04usb: gadget: select CONFIG_CRC32Arnd Bergmann
Without crc32 support, this driver fails to link: arm-linux-gnueabi-ld: drivers/usb/gadget/function/f_eem.o: in function `eem_unwrap': f_eem.c:(.text+0x11cc): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/usb/gadget/function/f_ncm.o:f_ncm.c:(.text+0x1e40): more undefined references to `crc32_le' follow Fixes: 6d3865f9d41f ("usb: gadget: NCM: Add transmit multi-frame.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210103214224.1996535-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-04usb: gadget: core: change the comment for usb_gadget_connectPeter Chen
The pullup does not need to be enabled at below situations: - For platforms which the hardware pullup starts after setting register even they do not see the VBUS. If the pullup is always enabled for these platforms, it will consume more power and break the USB IF compliance tests [1]. - For platforms which need to do BC 1.2 charger detection after seeing the VBUS. Pullup D+ will break the charger detection flow. - For platforms which the system suspend is allowed when the connection with host is there but the bus is not at suspend. For these platforms, it is better to disable pullup when entering the system suspend otherwise the host may confuse the device behavior after controller is in low power mode. Disable pullup is considered as a disconnection event from host side. [1] USB-IF Full and Low Speed Compliance Test Procedure F Back-voltage Testing Section 7.2.1 of the USB specification requires that no device shall supply (source) current on VBUS at its upstream facing port at any time. From VBUS on its upstream facing port, a device may only draw (sink) current. They may not provide power to the pull-up resistor on D+/D- unless VBUS is present (see Section 7.1.5). Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20201230051114.21370-1-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-04usb: gadget: configfs: Fix use-after-free issue with udc_nameEddie Hung
There is a use-after-free issue, if access udc_name in function gadget_dev_desc_UDC_store after another context free udc_name in function unregister_gadget. Context 1: gadget_dev_desc_UDC_store()->unregister_gadget()-> free udc_name->set udc_name to NULL Context 2: gadget_dev_desc_UDC_show()-> access udc_name Call trace: dump_backtrace+0x0/0x340 show_stack+0x14/0x1c dump_stack+0xe4/0x134 print_address_description+0x78/0x478 __kasan_report+0x270/0x2ec kasan_report+0x10/0x18 __asan_report_load1_noabort+0x18/0x20 string+0xf4/0x138 vsnprintf+0x428/0x14d0 sprintf+0xe4/0x12c gadget_dev_desc_UDC_show+0x54/0x64 configfs_read_file+0x210/0x3a0 __vfs_read+0xf0/0x49c vfs_read+0x130/0x2b4 SyS_read+0x114/0x208 el0_svc_naked+0x34/0x38 Add mutex_lock to protect this kind of scenario. Signed-off-by: Eddie Hung <eddie.hung@mediatek.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1609239215-21819-1-git-send-email-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-04usb: dwc3: gadget: Restart DWC3 gadget when enabling pullupWesley Cheng
usb_gadget_deactivate/usb_gadget_activate does not execute the UDC start operation, which may leave EP0 disabled and event IRQs disabled when re-activating the function. Move the enabling/disabling of USB EP0 and device event IRQs to be performed in the pullup routine. Fixes: ae7e86108b12 ("usb: dwc3: Stop active transfers before halting the controller") Tested-by: Michael Tretter <m.tretter@pengutronix.de> Cc: stable <stable@vger.kernel.org> Reported-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/1609282837-21666-1-git-send-email-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-04usb: usbip: vhci_hcd: protect shift sizeRandy Dunlap
Fix shift out-of-bounds in vhci_hcd.c: UBSAN: shift-out-of-bounds in ../drivers/usb/usbip/vhci_hcd.c:399:41 shift exponent 768 is too large for 32-bit type 'int' Fixes: 03cd00d538a6 ("usbip: vhci-hcd: Set the vhci structure up to work") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: syzbot+297d20e437b79283bf6d@syzkaller.appspotmail.com Cc: Yuyang Du <yuyang.du@intel.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201229071309.18418-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-04USB: usblp: fix DMA to stackJohan Hovold
Stack-allocated buffers cannot be used for DMA (on all architectures). Replace the HP-channel macro with a helper function that allocates a dedicated transfer buffer so that it can continue to be used with arguments from the stack. Note that the buffer is cleared on allocation as usblp_ctrl_msg() returns success also on short transfers (the buffer is only used for debugging). Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210104145302.2087-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-04USB: serial: iuu_phoenix: fix DMA from stackJohan Hovold
Stack-allocated buffers cannot be used for DMA (on all architectures) so allocate the flush command buffer using kmalloc(). Fixes: 60a8fc017103 ("USB: add iuu_phoenix driver") Cc: stable <stable@vger.kernel.org> # 2.6.25 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-04USB: serial: option: add LongSung M5710 module supportDaniel Palmer
Add a device-id entry for the LongSung M5710 module. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2df3 ProdID=9d03 Rev= 1.00 S: Manufacturer=Marvell S: Product=Mobile Composite Device Bus S: SerialNumber=<snip> C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03 I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniel Palmer <daniel@0x0f.com> https://lore.kernel.org/r/20201227031716.1343300-1-daniel@0x0f.com [ johan: drop id defines, only bind to vendor class ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-04HID: sony: select CONFIG_CRC32Arnd Bergmann
Without crc32 support, this driver fails to link: arm-linux-gnueabi-ld: drivers/hid/hid-sony.o: in function `sony_raw_event': hid-sony.c:(.text+0x8f4): undefined reference to `crc32_le' arm-linux-gnueabi-ld: hid-sony.c:(.text+0x900): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/hid/hid-sony.o:hid-sony.c:(.text+0x4408): more undefined references to `crc32_le' follow Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-01-04HID: sfh: fix address space confusionArnd Bergmann
The new driver uses a phys_addr_t to store a DMA address, which does not work when the two are different size: drivers/hid/amd-sfh-hid/amd_sfh_client.c:157:11: error: incompatible pointer types passing 'phys_addr_t *' (aka 'unsigned int *') to parameter of type 'dma_addr_t *' (aka 'unsigned long long *') [-Werror,-Wincompatible-pointer-types] &cl_data->sensor_phys_addr[i], ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/dma-mapping.h:393:15: note: passing argument to parameter 'dma_handle' here dma_addr_t *dma_handle, gfp_t gfp) ^ Change both the type and the variable name to dma_addr for consistency. Fixes: 4b2c53d93a4b ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-01-04pinctrl: aspeed: g6: Fix PWMG0 pinctrl settingBilly Tsai
The SCU offset for signal PWM8 in group PWM8G0 is wrong, fix it from SCU414 to SCU4B4. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support") Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20201217024912.3198-1-billy_tsai@aspeedtech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04platform/x86: amd-pmc: Fix CONFIG_DEBUG_FS checkShyam Sundar S K
lkp reported that CONFIG_DEBUG_FS was not defined because of wrong usage if macro, correcting it now. Fixes: 156ec4731cb2 ("platform/x86: amd-pmc: Add AMD platform support for S2Idle") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20201230081028.2615217-1-Shyam-sundar.S-k@amd.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-04platform/x86: thinkpad_acpi: correct palmsensor error checkingMark Pearson
The previous commit adding functionality for the palm sensor had a mistake which meant the error conditions on initialisation was not checked correctly. On some older platforms this meant that if the sensor wasn't available an error would be returned and the driver would fail to load. This commit corrects the error condition. Many thanks to Mario Oenning for reporting and determining the issue Signed-off-by: Mark Pearson <markpearson@lenovo.com> Link: https://lore.kernel.org/r/20201230024726.7861-1-markpearson@lenovo.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-04platform/x86: intel-vbtn: Support for tablet mode on Dell Inspiron 7352Arnold Gozum
The Dell Inspiron 7352 is a 2-in-1 model that has chassis-type "Notebook". Add this model to the dmi_switches_allow_list. Signed-off-by: Arnold Gozum <arngozum@gmail.com> Link: https://lore.kernel.org/r/20201226205307.249659-1-arngozum@gmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-04platform/x86: touchscreen_dmi: Add swap-x-y quirk for Goodix touchscreen on ↵Hans de Goede
Estar Beauty HD tablet The Estar Beauty HD (MID 7316R) tablet uses a Goodix touchscreen, with the X and Y coordinates swapped compared to the LCD panel. Add a touchscreen_dmi entry for this adding a "touchscreen-swapped-x-y" device-property to the i2c-client instantiated for this device before the driver binds. This is the first entry of a Goodix touchscreen to touchscreen_dmi.c, so far DMI quirks for Goodix touchscreen's have been added directly to drivers/input/touchscreen/goodix.c. Currently there are 3 DMI tables in goodix.c: 1. rotated_screen[] for devices where the touchscreen is rotated 180 degrees vs the LCD panel 2. inverted_x_screen[] for devices where the X axis is inverted 3. nine_bytes_report[] for devices which use a non standard touch report size Arguably only 3. really needs to be inside the driver and the other 2 cases are better handled through the generic touchscreen DMI quirk mechanism from touchscreen_dmi.c, which allows adding device-props to any i2c-client. Esp. now that goodix.c is using the generic touchscreen_properties code. Alternative to the approach from this patch we could add a 4th dmi_system_id table for devices with swapped-x-y axis to goodix.c, but that seems undesirable. Cc: Bastien Nocera <hadess@hadess.net> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201224135158.10976-1-hdegoede@redhat.com
2021-01-04platform/x86: i2c-multi-instantiate: Don't create platform device for ↵Heikki Krogerus
INT3515 ACPI nodes There are several reports about the tps6598x causing interrupt flood on boards with the INT3515 ACPI node, which then causes instability. There appears to be several problems with the interrupt. One problem is that the I2CSerialBus resources do not always map to the Interrupt resource with the same index, but that is not the only problem. We have not been able to come up with a solution for all the issues, and because of that disabling the device for now. The PD controller on these platforms is autonomous, and the purpose for the driver is primarily to supply status to the userspace, so this will not affect any functionality. Reported-by: Moody Salem <moody@uniswap.org> Fixes: a3dd034a1707 ("ACPI / scan: Create platform device for INT3515 ACPI nodes") Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1883511 Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201223143644.33341-1-heikki.krogerus@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-04platform/surface: SURFACE_PLATFORMS should depend on ACPIGeert Uytterhoeven
All Microsoft Surface platform-specific device drivers depend on ACPI, but the gatekeeper symbol SURFACE_PLATFORMS does not. Hence when the user is configuring a kernel without ACPI support, he is still asked about Microsoft Surface drivers, even though this question is irrelevant. Fix this by moving the dependency on ACPI from the individual driver symbols to SURFACE_PLATFORMS. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20201216133752.1321978-1-geert@linux-m68k.org Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-04platform/surface: surface_gpe: Fix non-PM_SLEEP build warningsRandy Dunlap
Fix build warnings when CONFIG_PM_SLEEP is not enabled and these functions are not used: ../drivers/platform/surface/surface_gpe.c:189:12: warning: ‘surface_gpe_resume’ defined but not used [-Wunused-function] static int surface_gpe_resume(struct device *dev) ^~~~~~~~~~~~~~~~~~ ../drivers/platform/surface/surface_gpe.c:184:12: warning: ‘surface_gpe_suspend’ defined but not used [-Wunused-function] static int surface_gpe_suspend(struct device *dev) ^~~~~~~~~~~~~~~~~~~ Fixes: 274335f1c557 ("platform/surface: Add Driver to set up lid GPEs on MS Surface device") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Maximilian Luz <luzmaximilian@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: platform-driver-x86@vger.kernel.org Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20201214233336.19782-1-rdunlap@infradead.org Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-04pinctrl: ingenic: Rename registers from JZ4760_GPIO_* to JZ4770_GPIO_*Paul Cercueil
Now that JZ4760 support has been fixed, it looks wrong to have JZ4760_GPIO_* registers being written if the SoC is a JZ4770 or later. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201211232810.261565-2-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: ingenic: Fix JZ4760 supportPaul Cercueil
- JZ4760 and JZ4760B have a similar register layout as the JZ4740, and don't use the new register layout, which was introduced with the JZ4770 SoC and not the JZ4760 or JZ4760B SoCs. - The JZ4740 code path only expected two function modes to be configurable for each pin, and wouldn't work with more than two. Fix it for the JZ4760, which has four configurable function modes. Fixes: 0257595a5cf4 ("pinctrl: Ingenic: Add pinctrl driver for JZ4760 and JZ4760B.") Cc: <stable@vger.kernel.org> # 5.3 Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201211232810.261565-1-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04regulator: qcom-rpmh: add QCOM_COMMAND_DB dependencyArnd Bergmann
A built-in regulator driver cannot link against a modular cmd_db driver: qcom-rpmh-regulator.c:(.text+0x174): undefined reference to `cmd_db_read_addr' There is already a dependency for RPMh, so add another one of this type for cmd_db. Fixes: 34c5aa2666db ("regulator: Kconfig: Fix REGULATOR_QCOM_RPMH dependencies to avoid build error") Fixes: 46fc033eba42 ("regulator: add QCOM RPMh regulator driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201230145712.3133110-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04regulator: qcom-rpmh-regulator: correct hfsmps515 definitionDmitry Baryshkov
According to the datasheet pm8009's HFS515 regulators have 16mV resolution rather than declared 1.6 mV. Correct the resolution. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150") Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201231122348.637917-3-dmitry.baryshkov@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04spi: fix the divide by 0 error when calculating xfer waiting timeXu Yilun
The xfer waiting time is the result of xfer->len / xfer->speed_hz. This patch makes the assumption of 100khz xfer speed if the xfer->speed_hz is not assigned and stays 0. This avoids the divide by 0 issue and ensures a reasonable tolerant waiting time. Signed-off-by: Xu Yilun <yilun.xu@intel.com> Link: https://lore.kernel.org/r/1609723749-3557-1-git-send-email-yilun.xu@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad deviceKai-Heng Feng
Pointstick and its left/right buttons on HP EliteBook 850 G7 need multi-input quirk to work correctly. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-01-04dmaengine: xilinx_dma: fix mixed_enum_type coverity warningShravya Kumbham
Typecast the fls(width -1) with (enum dmaengine_alignment) in xilinx_dma_chan_probe function to fix the coverity warning. Addresses-Coverity: Event mixed_enum_type. Fixes: 9cd4360de609 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support") Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1608722462-29519-4-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-04dmaengine: xilinx_dma: fix incompatible param warning in _child_probe()Shravya Kumbham
In xilinx_dma_child_probe function, the nr_channels variable is passed to of_property_read_u32() which expects an u32 return value pointer. Modify the nr_channels variable type from int to u32 to fix the incompatible parameter coverity warning. Addresses-Coverity: Event incompatible_param. Fixes: 1a9e7a03c761 ("dmaengine: vdma: Add support for mulit-channel dma mode") Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1608722462-29519-3-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-04dmaengine: xilinx_dma: check dma_async_device_register return valueShravya Kumbham
dma_async_device_register() can return non-zero error code. Add condition to check the return value of dma_async_device_register function and handle the error path. Addresses-Coverity: Event check_return. Fixes: 9cd4360de609 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support") Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1608722462-29519-2-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-04dmaengine: qcom: fix gpi undefined behaviorArnd Bergmann
gcc points out an incorrect error handling loop: drivers/dma/qcom/gpi.c: In function 'gpi_ch_init': drivers/dma/qcom/gpi.c:1254:15: error: iteration 2 invokes undefined behavior [-Werror=aggressive-loop-optimizations] 1254 | struct gpii *gpii = gchan->gpii; | ^~~~ drivers/dma/qcom/gpi.c:1951:2: note: within this loop 1951 | for (i = i - 1; i >= 0; i++) { | ^~~ Change the loop to correctly walk backwards through the initialized fields rather than off into the woods. Fixes: 5d0c3533a19f ("dmaengine: qcom: Add GPI dma driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210103135738.3741123-1-arnd@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-04mtd: rawnand: gpmi: fix dst bit offset when extracting raw payloadSean Nyekjaer
Re-add the multiply by 8 to "step * eccsize" to correct the destination bit offset when extracting the data payload in gpmi_ecc_read_page_raw(). Fixes: e5e5631cc889 ("mtd: rawnand: gpmi: Use nand_extract_bits()") Cc: stable@vger.kernel.org Reported-by: Martin Hundebøll <martin@geanix.com> Signed-off-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201221100013.2715675-1-sean@geanix.com
2021-01-04USB: serial: option: add Quectel EM160R-GLBjørn Mork
New modem using ff/ff/30 for QCDM, ff/00/00 for AT and NMEA, and ff/ff/ff for RMNET/QMI. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=2c7c ProdID=0620 Rev= 4.09 S: Manufacturer=Quectel S: Product=EM160R-GL S: SerialNumber=e31cedc1 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Bjørn Mork <bjorn@mork.no> [ johan: add model comment ] Signed-off-by: Johan Hovold <johan@kernel.org>
2021-01-04phy: mediatek: allow compile-testing the dsi phyArnd Bergmann
Randconfig builds show another broken dependency: WARNING: unmet direct dependencies detected for PHY_MTK_MIPI_DSI Depends on [n]: ARCH_MEDIATEK [=n] && OF [=y] Selected by [m]: - DRM_MEDIATEK [=m] && HAS_IOMEM [=y] && DRM [=m] && (ARCH_MEDIATEK [=n] || ARM [=y] && COMPILE_TEST [=y]) && COMMON_CLK [=y] && HAVE_ARM_SMCCC [=y] && OF [=y] && MTK_MMSYS [=y] This is similar to the hdmi driver I fixed earlier, and I guess the common-clk bug would sooner or later also manifest here, so just use the exact same solution I chose for the other driver, and hope that any future drivers just copy it from here. Fixes: 90f80d95992f ("phy: mediatek: Move mtk_mipi_dsi_phy driver into drivers/phy/mediatek folder") Fixes: f5f6e01f9164 ("phy: mediatek: allow compile-testing the hdmi phy") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210103135524.3678664-1-arnd@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-04phy: cpcap-usb: Fix warning for missing regulator_disableTony Lindgren
On deferred probe, we will get the following splat: cpcap-usb-phy cpcap-usb-phy.0: could not initialize VBUS or ID IIO: -517 WARNING: CPU: 0 PID: 21 at drivers/regulator/core.c:2123 regulator_put+0x68/0x78 ... (regulator_put) from [<c068ebf0>] (release_nodes+0x1b4/0x1fc) (release_nodes) from [<c068a9a4>] (really_probe+0x104/0x4a0) (really_probe) from [<c068b034>] (driver_probe_device+0x58/0xb4) Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20201230102105.11826-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-03lightnvm: select CONFIG_CRC32Arnd Bergmann
Without CRC32 support, this fails to link: arm-linux-gnueabi-ld: drivers/lightnvm/pblk-init.o: in function `pblk_init': pblk-init.c:(.text+0x2654): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/lightnvm/pblk-init.o: in function `pblk_exit': pblk-init.c:(.text+0x2a7c): undefined reference to `crc32_le' Fixes: a4bd217b4326 ("lightnvm: physical block device (pblk) target") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-03block: rsxx: select CONFIG_CRC32Arnd Bergmann
Without crc32, the driver fails to link: arm-linux-gnueabi-ld: drivers/block/rsxx/config.o: in function `rsxx_load_config': config.c:(.text+0x124): undefined reference to `crc32_le' Fixes: 8722ff8cdbfa ("block: IBM RamSan 70/80 device driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-03gpiolib: cdev: fix frame size warning in gpio_ioctl()Kent Gibson
The kernel test robot reports the following warning in [1]: drivers/gpio/gpiolib-cdev.c: In function 'gpio_ioctl': >>drivers/gpio/gpiolib-cdev.c:1437:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] Refactor gpio_ioctl() to handle each ioctl in its own helper function and so reduce the variables stored on the stack to those explicitly required to service the ioctl at hand. The lineinfo_get_v1() helper handles both the GPIO_GET_LINEINFO_IOCTL and GPIO_GET_LINEINFO_WATCH_IOCTL, as per the corresponding v2 implementation - lineinfo_get(). [1] https://lore.kernel.org/lkml/202012270910.VW3qc1ER-lkp@intel.com/ Fixes: aad955842d1c ("gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Kent Gibson <warthog618@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
generated by cgit (git 2.34.1) at 2025-09-12 14:22:17 +0000