| Age | Commit message (Collapse) | Author |
|---|
|
The right function to release a fwnode acquired via
device_get_named_child_node() is fwnode_handle_put(), and not
fwnode_remove_software_node(), as no software node is being handled.
Replace the calls to fwnode_remove_software_node() with
fwnode_handle_put() in qcom_pmic_typec_probe() and
qcom_pmic_typec_remove().
Cc: stable@vger.kernel.org
Fixes: a4422ff22142 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver")
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241020-qcom_pmic_typec-fwnode_remove-v2-1-7054f3d2e215@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix a boot hang issue triggered when a USB3 device is incorrectly assumed
to be tunneled over USB4, thus attempting to create a device link between
the USB3 "consumer" device and the USB4 "supplier" Host Interface before
the USB4 side is properly bound to a driver.
This could happen if xhci isn't capable of detecting tunneled devices,
but ACPI tables contain all info needed to assume device is tunneled.
i.e. udev->tunnel_mode == USB_LINK_UNKNOWN.
It turns out that even for actual tunneled USB3 devices it can't be
assumed that the thunderbolt driver providing the tunnel is loaded
before the tunneled USB3 device is created.
The tunnel can be created by BIOS and remain in use by thunderbolt/USB4
host driver once it loads.
Solve this by making the device link "stateless", which doesn't create
a driver presence order dependency between the supplier and consumer
drivers.
It still guarantees correct suspend/resume and shutdown ordering.
cc: Mario Limonciello <mario.limonciello@amd.com>
Fixes: f1bfb4a6fed6 ("usb: acpi: add device link between tunneled USB3 device and USB4 Host Interface")
Tested-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241024131355.3836538-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The commit d483f034f032 ("usb: dwc2: Skip clock gating on Broadcom SoCs")
introduced a regression on Raspberry Pi 3 B Plus, which prevents
enumeration of the onboard Microchip LAN7800 in case no external USB device
is connected during boot.
Fixes: d483f034f032 ("usb: dwc2: Skip clock gating on Broadcom SoCs")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20241025103621.4780-2-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
During the aborting of a command, the software receives a command
completion event for the command ring stopped, with the TRB pointing
to the next TRB after the aborted command.
If the command we abort is located just before the Link TRB in the
command ring, then during the 'command ring stopped' completion event,
the xHC gives the Link TRB in the event's cmd DMA, which causes a
mismatch in handling command completion event.
To address this situation, move the 'command ring stopped' completion
event check slightly earlier, since the specific command it stopped
on isn't of significant concern.
Fixes: 7f84eef0dafb ("USB: xhci: No-op command queueing and irq handler.")
Cc: stable@vger.kernel.org
Signed-off-by: Faisal Hassan <quic_faisalh@quicinc.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241022155631.1185-1-quic_faisalh@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use pm_runtime_put in the remove function and pm_runtime_get to disable
RPM on platforms that don't support runtime D3, as re-enabling it through
sysfs auto power control may cause the controller to malfunction. This
can lead to issues such as hotplug devices not being detected due to
failed interrupt generation.
Fixes: a5d6264b638e ("xhci: Enable RPM on controllers that support low-power states")
Cc: stable <stable@kernel.org>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241024133718.723846-1-Basavaraj.Natikar@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fixes for v6.12-rc5
This includes following USB4/Thunderbolt fixes for v6.12-rc5:
- Fix KASAN reported stack out-of-bounds read
- Honor Time Management Unit (TMU) requirements in the domain when
configuring TMU mode of a newly plugged router.
Both have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.12-rc5' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Honor TMU requirements in the domain when setting TMU mode
thunderbolt: Fix KASAN reported stack out-of-bounds read in tb_retimer_scan()
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: Fixes for 6.12, set 2
Usual mixed back of fixes for ancient bugs and some more recently
introduced problems.
gts-helper module
- Memory leak fixes for this library code to handle complex gain cases.
adi,ad7124
- Fix a divide by zero that can be triggered from userspace.
adi,ad7380
- Various supply fixes. Includes some minor rework that simplifies the
fix though increases the apparent scale of the change.
adi,ad9832
- Avoid a potential divide by zero if clk_get_rate() returns 0.
adi,ltc2642
- Fix wrong Kconfig regmap dependency.
vishay,veml6030
- Fix a scaling problem with decimal part of processed channel.
Note that only the illuminance channel is fixed as a larger series
of cleanups not suitable for this point in the rc cycle removes
the intensity channel anyway.
* tag 'iio-fixes-for-6.12b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: dac: Kconfig: Fix build error for ltc2664
iio: adc: ad7124: fix division by zero in ad7124_set_channel_odr()
staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg()
docs: iio: ad7380: fix supply for ad7380-4
iio: adc: ad7380: fix supplies for ad7380-4
iio: adc: ad7380: add missing supplies
iio: adc: ad7380: use devm_regulator_get_enable_read_voltage()
dt-bindings: iio: adc: ad7380: fix ad7380-4 reference supply
iio: light: veml6030: fix microlux value calculation
iio: gts-helper: Fix memory leaks for the error path of iio_gts_build_avail_scale_table()
iio: gts-helper: Fix memory leaks in iio_gts_build_avail_scale_table()
|
|
Read buffer is allocated according to max message size, reported by
the firmware and may reach 64K in systems with pxp client.
Contiguous 64k allocation may fail under memory pressure.
Read buffer is used as in-driver message storage and not required
to be contiguous.
Use kvmalloc to allow kernel to allocate non-contiguous memory.
Fixes: 3030dc056459 ("mei: add wrapper for queuing control commands.")
Cc: stable <stable@kernel.org>
Reported-by: Rohit Agarwal <rohiagar@chromium.org>
Closes: https://lore.kernel.org/all/20240813084542.2921300-1-rohiagar@chromium.org/
Tested-by: Brian Geffon <bgeffon@google.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Acked-by: Tomas Winkler <tomasw@gmail.com>
Link: https://lore.kernel.org/r/20241015123157.2337026-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 15fffc6a5624b13b428bb1c6e9088e32a55eb82c.
This commit causes a regression, so revert it for now until it can come
back in a way that works for everyone.
Link: https://lore.kernel.org/all/172790598832.1168608.4519484276671503678.stgit@dwillia2-xfh.jf.intel.com/
Fixes: 15fffc6a5624 ("driver core: Fix uevent_show() vs driver detach race")
Cc: stable <stable@kernel.org>
Cc: Ashish Sangwan <a.sangwan@samsung.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Dirk Behme <dirk.behme@de.bosch.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds support for another Lenovo Mini dock 0x17EF:0x3098 to the
r8152 driver. The device has been tested on NixOS, hotplugging and sleep
included.
Signed-off-by: Benjamin Große <ste3ls@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241020174128.160898-1-ste3ls@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KASAN reports the following UAF. The metadata_dst, which is used to
store the SCI value for macsec offload, is already freed by
metadata_dst_free() in macsec_free_netdev(), while driver still use it
for sending the packet.
To fix this issue, dst_release() is used instead to release
metadata_dst. So it is not freed instantly in macsec_free_netdev() if
still referenced by skb.
BUG: KASAN: slab-use-after-free in mlx5e_xmit+0x1e8f/0x4190 [mlx5_core]
Read of size 2 at addr ffff88813e42e038 by task kworker/7:2/714
[...]
Workqueue: mld mld_ifc_work
Call Trace:
<TASK>
dump_stack_lvl+0x51/0x60
print_report+0xc1/0x600
kasan_report+0xab/0xe0
mlx5e_xmit+0x1e8f/0x4190 [mlx5_core]
dev_hard_start_xmit+0x120/0x530
sch_direct_xmit+0x149/0x11e0
__qdisc_run+0x3ad/0x1730
__dev_queue_xmit+0x1196/0x2ed0
vlan_dev_hard_start_xmit+0x32e/0x510 [8021q]
dev_hard_start_xmit+0x120/0x530
__dev_queue_xmit+0x14a7/0x2ed0
macsec_start_xmit+0x13e9/0x2340
dev_hard_start_xmit+0x120/0x530
__dev_queue_xmit+0x14a7/0x2ed0
ip6_finish_output2+0x923/0x1a70
ip6_finish_output+0x2d7/0x970
ip6_output+0x1ce/0x3a0
NF_HOOK.constprop.0+0x15f/0x190
mld_sendpack+0x59a/0xbd0
mld_ifc_work+0x48a/0xa80
process_one_work+0x5aa/0xe50
worker_thread+0x79c/0x1290
kthread+0x28f/0x350
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x11/0x20
</TASK>
Allocated by task 3922:
kasan_save_stack+0x20/0x40
kasan_save_track+0x10/0x30
__kasan_kmalloc+0x77/0x90
__kmalloc_noprof+0x188/0x400
metadata_dst_alloc+0x1f/0x4e0
macsec_newlink+0x914/0x1410
__rtnl_newlink+0xe08/0x15b0
rtnl_newlink+0x5f/0x90
rtnetlink_rcv_msg+0x667/0xa80
netlink_rcv_skb+0x12c/0x360
netlink_unicast+0x551/0x770
netlink_sendmsg+0x72d/0xbd0
__sock_sendmsg+0xc5/0x190
____sys_sendmsg+0x52e/0x6a0
___sys_sendmsg+0xeb/0x170
__sys_sendmsg+0xb5/0x140
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Freed by task 4011:
kasan_save_stack+0x20/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x37/0x50
poison_slab_object+0x10c/0x190
__kasan_slab_free+0x11/0x30
kfree+0xe0/0x290
macsec_free_netdev+0x3f/0x140
netdev_run_todo+0x450/0xc70
rtnetlink_rcv_msg+0x66f/0xa80
netlink_rcv_skb+0x12c/0x360
netlink_unicast+0x551/0x770
netlink_sendmsg+0x72d/0xbd0
__sock_sendmsg+0xc5/0x190
____sys_sendmsg+0x52e/0x6a0
___sys_sendmsg+0xeb/0x170
__sys_sendmsg+0xb5/0x140
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 0a28bfd4971f ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20241021100309.234125-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the allocation of chip->auth to tpm2_start_auth_session() so that this
field can be used as flag to tell whether auth session is active or not.
Instead of flushing and reloading the auth session for every transaction
separately, keep the session open unless /dev/tpm0 is used.
Reported-by: Pengyu Ma <mapengyu@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219229
Cc: stable@vger.kernel.org # v6.10+
Fixes: 7ca110f2679b ("tpm: Address !chip->auth in tpm_buf_append_hmac_session*()")
Tested-by: Pengyu Ma <mapengyu@gmail.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The following 3 commits landed in parallel:
commit d7d2688bf4ea ("drm/amd/pm: update workload mask after the setting")
commit 7a1613e47e65 ("drm/amdgpu/smu13: always apply the powersave optimization")
commit 7c210ca5a2d7 ("drm/amdgpu: handle default profile on on devices without fullscreen 3D")
While everything is set correctly, this caused the profile to be
reported incorrectly because both the powersave and fullscreen3d bits
were set in the mask and when the driver prints the profile, it looks
for the first bit set.
Fixes: d7d2688bf4ea ("drm/amd/pm: update workload mask after the setting")
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ecfe9b237687a55d596fff0650ccc8cc455edd3f)
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of driver specific fixes for SPI, there's nothing
particularly remarkable about any of them"
* tag 'spi-fix-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-fsl-dspi: Fix crash when not using GPIO chip select
spi: geni-qcom: Fix boot warning related to pm_runtime and devres
spi: mtk-snfi: fix kerneldoc for mtk_snand_is_page_ops()
spi: stm32: fix missing device mode capability in stm32mp25
|
|
KASAN reports that the GPU metrics table allocated in
vangogh_tables_init() is not large enough for the memset done in
smu_cmn_init_soft_gpu_metrics(). Condensed report follows:
[ 33.861314] BUG: KASAN: slab-out-of-bounds in smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu]
[ 33.861799] Write of size 168 at addr ffff888129f59500 by task mangoapp/1067
...
[ 33.861808] CPU: 6 UID: 1000 PID: 1067 Comm: mangoapp Tainted: G W 6.12.0-rc4 #356 1a56f59a8b5182eeaf67eb7cb8b13594dd23b544
[ 33.861816] Tainted: [W]=WARN
[ 33.861818] Hardware name: Valve Galileo/Galileo, BIOS F7G0107 12/01/2023
[ 33.861822] Call Trace:
[ 33.861826] <TASK>
[ 33.861829] dump_stack_lvl+0x66/0x90
[ 33.861838] print_report+0xce/0x620
[ 33.861853] kasan_report+0xda/0x110
[ 33.862794] kasan_check_range+0xfd/0x1a0
[ 33.862799] __asan_memset+0x23/0x40
[ 33.862803] smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.863306] vangogh_get_gpu_metrics_v2_4+0x123/0xad0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.864257] vangogh_common_get_gpu_metrics+0xb0c/0xbc0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.865682] amdgpu_dpm_get_gpu_metrics+0xcc/0x110 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.866160] amdgpu_get_gpu_metrics+0x154/0x2d0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.867135] dev_attr_show+0x43/0xc0
[ 33.867147] sysfs_kf_seq_show+0x1f1/0x3b0
[ 33.867155] seq_read_iter+0x3f8/0x1140
[ 33.867173] vfs_read+0x76c/0xc50
[ 33.867198] ksys_read+0xfb/0x1d0
[ 33.867214] do_syscall_64+0x90/0x160
...
[ 33.867353] Allocated by task 378 on cpu 7 at 22.794876s:
[ 33.867358] kasan_save_stack+0x33/0x50
[ 33.867364] kasan_save_track+0x17/0x60
[ 33.867367] __kasan_kmalloc+0x87/0x90
[ 33.867371] vangogh_init_smc_tables+0x3f9/0x840 [amdgpu]
[ 33.867835] smu_sw_init+0xa32/0x1850 [amdgpu]
[ 33.868299] amdgpu_device_init+0x467b/0x8d90 [amdgpu]
[ 33.868733] amdgpu_driver_load_kms+0x19/0xf0 [amdgpu]
[ 33.869167] amdgpu_pci_probe+0x2d6/0xcd0 [amdgpu]
[ 33.869608] local_pci_probe+0xda/0x180
[ 33.869614] pci_device_probe+0x43f/0x6b0
Empirically we can confirm that the former allocates 152 bytes for the
table, while the latter memsets the 168 large block.
Root cause appears that when GPU metrics tables for v2_4 parts were added
it was not considered to enlarge the table to fit.
The fix in this patch is rather "brute force" and perhaps later should be
done in a smarter way, by extracting and consolidating the part version to
size logic to a common helper, instead of brute forcing the largest
possible allocation. Nevertheless, for now this works and fixes the out of
bounds write.
v2:
* Drop impossible v3_0 case. (Mario)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: 41cec40bc9ba ("drm/amd/pm: Vangogh: Add new gpu_metrics_v2_4 to acquire gpu_metrics")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Wenyou Yang <WenYou.Yang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241025145639.19124-1-tursulin@igalia.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0880f58f9609f0200483a49429af0f050d281703)
Cc: stable@vger.kernel.org # v6.6+
|
|
EnhancedPrefetchScheduleAccelerationFinal DCN35"
This reverts
commit 9dad21f910fc ("drm/amd/display: update DML2 policy EnhancedPrefetchScheduleAccelerationFinal DCN35")
[why & how]
The offending commit exposes a hang with lid close/open behavior.
Both issues seem to be related to ODM 2:1 mode switching, so there
is another issue generic to that sequence that needs to be
investigated.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 68bf95317ebf2cfa7105251e4279e951daceefb7)
Cc: stable@vger.kernel.org
|
|
drm_gpu_scheduler.submit_wq is used to submit jobs, jobs are in the path
of dma-fences, and dma-fences are in the path of reclaim. Mark scheduler
work queue with WQ_MEM_RECLAIM to ensure forward progress during
reclaim; without WQ_MEM_RECLAIM, work queues cannot make forward
progress during reclaim.
v2:
- Fixes tags (Philipp)
- Reword commit message (Philipp)
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Philipp Stanner <pstanner@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 34f50cc6441b ("drm/sched: Use drm sched lockdep map for submit_wq")
Fixes: a6149f039369 ("drm/sched: Convert drm scheduler to use a work queue rather than kthread")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023235917.1836428-1-matthew.brost@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Do not continue on tpm2_create_primary() failure in tpm2_load_null().
Cc: stable@vger.kernel.org # v6.10+
Fixes: eb24c9788cd9 ("tpm: disable the TPM if NULL name changes")
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Do not continue tpm2_sessions_init() further if the null key pair creation
fails.
Cc: stable@vger.kernel.org # v6.10+
Fixes: d2add27cf2b8 ("tpm: Add NULL primary creation")
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The original optional property was missing a vendor string prefix; this
has been rectified.
Fix the naming of such optional property in code too.
Cc: Peng Fan <peng.fan@nxp.com>
Fixes: 1780e411ef94 ("firmware: arm_scmi: Use max-rx-timeout-ms from devicetree")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20241028120151.1301177-8-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
When starting the SD Express process, the low power negotiation mode will
be disabled, so we need to re-enable it after switching back to SD mode.
Fixes: 0e92aec2efa0 ("mmc: sdhci-pci-gli: Add support SD Express card for GL9767")
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Cc: stable@vger.kernel.org
Message-ID: <20241025060017.1663697-2-benchuanggli@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
On sdhci_gl9767_set_clock(), the vendor header space(VHS) is read-only
after calling gl9767_disable_ssc_pll() and gl9767_set_ssc_pll_205mhz().
So the low power negotiation mode cannot be enabled again.
Introduce gl9767_set_low_power_negotiation() function to fix it.
The explanation process is as below.
static void sdhci_gl9767_set_clock()
{
...
gl9767_vhs_write();
...
value |= PCIE_GLI_9767_CFG_LOW_PWR_OFF;
pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value); <--- (a)
gl9767_disable_ssc_pll(); <--- (b)
sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
if (clock == 0)
return; <-- (I)
...
if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) {
...
gl9767_set_ssc_pll_205mhz(); <--- (c)
}
...
value &= ~PCIE_GLI_9767_CFG_LOW_PWR_OFF;
pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value); <-- (II)
gl9767_vhs_read();
}
(a) disable low power negotiation mode. When return on (I), the low power
mode is disabled. After (b) and (c), VHS is read-only, the low power mode
cannot be enabled on (II).
Reported-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Fixes: d2754355512e ("mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL9767")
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Tested-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Message-ID: <20241025060017.1663697-1-benchuanggli@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The maximum number of buffers that can be requested was increased to
64 for the video capture queue. But video capture used a must_blank
array that was still sized for 32 (VIDEO_MAX_FRAME). This caused an
out-of-bounds write when using buffer indices >= 32.
Create a new define MAX_VID_CAP_BUFFERS that is used to access the
must_blank array and set max_num_buffers for the video capture queue.
This solves a crash reported by:
https://bugzilla.kernel.org/show_bug.cgi?id=219258
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Fixes: cea70ed416b4 ("media: test-drivers: vivid: Increase max supported buffers for capture queues")
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Asus thermal profile fix, fixing performance issues on Lunar Lake
- Intel PMC: one revert for a lockdep issue and one bugfix
- Dell WMI: Ignore some WMI events on suspend/resume to silence warnings
* tag 'platform-drivers-x86-v6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-wmi: Fix thermal profile initialization
platform/x86: dell-wmi: Ignore suspend notifications
platform/x86/intel/pmc: Fix pmc_core_iounmap to call iounmap for valid addresses
platform/x86:intel/pmc: Revert "Enable the ACPI PM Timer to be turned off when suspended"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A single commit to resolve a regression existing in v6.11 or later.
The change in 1394 OHCI driver in v6.11 kernel could cause general
protection faults when rediscovering nodes in IEEE 1394 bus while
holding a spin lock. Consequently, watchdog checks can report a hard
lockup.
Currently, this issue is observed primarily during the system resume
phase when using an extra node with three ports or more is used.
However, it could potentially occur in the other cases as well"
* tag 'firewire-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fix invalid port index for parent device
|
|
Pull block fixes from Jens Axboe:
- Pull request for MD via Song fixing a few issues
- Fix a wrong check in blk_rq_map_user_bvec(), causing IO errors on
passthrough IO (Xinyu)
* tag 'block-6.12-20241026' of git://git.kernel.dk/linux:
block: fix sanity checks in blk_rq_map_user_bvec
md/raid10: fix null ptr dereference in raid10_size()
md: ensure child flush IO does not affect origin bio->bi_status
|
|
Zenghui points out that a recent change to the way set_affinity is
handled for VPEs has the potential to return an error if the VPE
hasn't been mapped yet (because the guest hasn't emited a MAPTI
command yet), affecting GICv4.0 implementations that rely on the
ITSList feature.
Fix this by making the set_affinity succeed in this case, and
return early, without trying to touch the HW.
Fixes: 1442ee0011983 ("irqchip/gic-v4: Don't allow a VMOVP on a dying VPE")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/all/20241027102220.1858558-1-maz@kernel.org
Link: https://lore.kernel.org/r/aab45cd3-e5ca-58cf-e081-e32a17f5b4e7@huawei.com
|
|
In a commit 24b7f8e5cd65 ("firewire: core: use helper functions for self
ID sequence"), the enumeration over self ID sequence was refactored with
some helper functions with KUnit tests. These helper functions are
guaranteed to work expectedly by the KUnit tests, however their application
includes a mistake to assign invalid value to the index of port connected
to parent device.
This bug affects the case that any extra node devices which has three or
more ports are connected to 1394 OHCI controller. In the case, the path
to update the tree cache could hits WARN_ON(), and gets general protection
fault due to the access to invalid address computed by the invalid value.
This commit fixes the bug to assign correct port index.
Cc: stable@vger.kernel.org
Reported-by: Edmund Raile <edmund.raile@proton.me>
Closes: https://lore.kernel.org/lkml/8a9902a4ece9329af1e1e42f5fea76861f0bf0e8.camel@proton.me/
Fixes: 24b7f8e5cd65 ("firewire: core: use helper functions for self ID sequence")
Link: https://lore.kernel.org/r/20241025034137.99317-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
When support for vivobook fan profiles was added, the initial
call to throttle_thermal_policy_set_default() was removed, which
however is necessary for full initialization.
Fix this by calling throttle_thermal_policy_set_default() again
when setting up the platform profile.
Fixes: bcbfcebda2cb ("platform/x86: asus-wmi: add support for vivobook fan profiles")
Reported-by: Michael Larabel <Michael@phoronix.com>
Closes: https://www.phoronix.com/review/lunar-lake-xe2/5
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241025191514.15032-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Commit dc748812fca0 ("Input: adp5588-keys - add support for pure gpio")
made having interrupt line optional for the device, however it neglected
to update suspend and resume handlers that try to disable interrupts
for the duration of suspend.
Fix this by checking if interrupt number assigned to the i2c device is
not 0 before trying to disable or reenable it.
Fixes: dc748812fca0 ("Input: adp5588-keys - add support for pure gpio")
Link: https://lore.kernel.org/r/Zv_2jEMYSWDw2gKs@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
With the recent change to allow out-of-order decoder de-commit it
highlights a need to strengthen the in-order decoder commit guarantees.
As it stands match_free_decoder() ensures that if 2 regions are racing
decoder allocations the one that wins the race will get the lower id
decoder, but that still leaves the race to *commit* the decoder.
Rather than have this complicated case of "reserved in-order, but may
still commit out-of-order", just arrange for the reservation order to
match the commit-order. In other words, prevent subsequent allocations
until the last reservation is committed.
This precludes overlapping region creation events and requires the
previous regionN to either move forward to the decoder commit stage or
drop its reservation before regionN+1 can move forward. That is,
provided that regionN and regionN+1 decode through the same switch port.
As a side effect this allows match_free_decoder() to drop its dependency
on needing write access to the device_find_child() @data parameter [1].
Reported-by: Zijun Hu <quic_zijuhu@quicinc.com>
Closes: http://lore.kernel.org/20240905-const_dfc_prepare-v4-0-4180e1d5a244@quicinc.com
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964783668.81806.14962699553881333486.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
In support of investigating an initialization failure report [1],
cxl_test was updated to register mock memory-devices after the mock
root-port/bus device had been registered. That led to cxl_test crashing
with a use-after-free bug with the following signature:
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1
cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0
1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1
[..]
cxld_unregister: cxl decoder14.0:
cxl_region_decode_reset: cxl_region region3:
mock_decoder_reset: cxl_port port3: decoder3.0 reset
2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1
cxl_endpoint_decoder_release: cxl decoder14.0:
[..]
cxld_unregister: cxl decoder7.0:
3) cxl_region_decode_reset: cxl_region region3:
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI
[..]
RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core]
[..]
Call Trace:
<TASK>
cxl_region_decode_reset+0x69/0x190 [cxl_core]
cxl_region_detach+0xe8/0x210 [cxl_core]
cxl_decoder_kill_region+0x27/0x40 [cxl_core]
cxld_unregister+0x5d/0x60 [cxl_core]
At 1) a region has been established with 2 endpoint decoders (7.0 and
14.0). Those endpoints share a common switch-decoder in the topology
(3.0). At teardown, 2), decoder14.0 is the first to be removed and hits
the "out of order reset case" in the switch decoder. The effect though
is that region3 cleanup is aborted leaving it in-tact and
referencing decoder14.0. At 3) the second attempt to teardown region3
trips over the stale decoder14.0 object which has long since been
deleted.
The fix here is to recognize that the CXL specification places no
mandate on in-order shutdown of switch-decoders, the driver enforces
in-order allocation, and hardware enforces in-order commit. So, rather
than fail and leave objects dangling, always remove them.
In support of making cxl_region_decode_reset() always succeed,
cxl_region_invalidate_memregion() failures are turned into warnings.
Crashing the kernel is ok there since system integrity is at risk if
caches cannot be managed around physical address mutation events like
CXL region destruction.
A new device_for_each_child_reverse_from() is added to cleanup
port->commit_end after all dependent decoders have been disabled. In
other words if decoders are allocated 0->1->2 and disabled 1->2->0 then
port->commit_end only decrements from 2 after 2 has been disabled, and
it decrements all the way to zero since 1 was disabled previously.
Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1]
Cc: stable@vger.kernel.org
Fixes: 176baefb2eb5 ("cxl/hdm: Commit decoder state to hardware")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964782781.81806.17902885593105284330.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
In order to ensure root CXL ports are enabled upon cxl_acpi_probe()
when the 'cxl_port' driver is built as a module, arrange for the
module to be pre-loaded or built-in.
The "Fixes:" but no "Cc: stable" on this patch reflects that the issue
is merely by inspection since the bug that triggered the discovery of
this potential problem [1] is fixed by other means. However, a stable
backport should do no harm.
Fixes: 8dd2bc0f8e02 ("cxl/mem: Add the cxl_mem driver")
Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964781969.81806.17276352414854540808.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
It turns out since its original introduction, pre-2.6.12,
bus_rescan_devices() has skipped devices that might be in the process of
attaching or detaching from their driver. For CXL this behavior is
unwanted and expects that cxl_bus_rescan() is a probe barrier.
That behavior is simple enough to achieve with bus_for_each_dev() paired
with call to device_attach(), and it is unclear why bus_rescan_devices()
took the position of lockless consumption of dev->driver which is racy.
The "Fixes:" but no "Cc: stable" on this patch reflects that the issue
is merely by inspection since the bug that triggered the discovery of
this potential problem [1] is fixed by other means. However, a stable
backport should do no harm.
Fixes: 8dd2bc0f8e02 ("cxl/mem: Add the cxl_mem driver")
Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964781104.81806.4277549800082443769.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
When the CXL subsystem is built-in the module init order is determined
by Makefile order. That order violates expectations. The expectation is
that cxl_acpi and cxl_mem can race to attach. If cxl_acpi wins the race,
cxl_mem will find the enabled CXL root ports it needs. If cxl_acpi loses
the race it will retrigger cxl_mem to attach via cxl_bus_rescan(). That
flow only works if cxl_acpi can assume ports are enabled immediately
upon cxl_acpi_probe() return. That in turn can only happen in the
CONFIG_CXL_ACPI=y case if the cxl_port driver is registered before
cxl_acpi_probe() runs.
Fix up the order to prevent initialization failures. Ensure that
cxl_port is built-in when cxl_acpi is also built-in, arrange for
Makefile order to resolve the subsys_initcall() order of cxl_port and
cxl_acpi, and arrange for Makefile order to resolve the
device_initcall() (module_init()) order of the remaining objects.
As for what contributed to this not being found earlier, the CXL
regression environment, cxl_test, builds all CXL functionality as a
module to allow to symbol mocking and other dynamic reload tests. As a
result there is no regression coverage for the built-in case.
Reported-by: Gregory Price <gourry@gourry.net>
Closes: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net
Tested-by: Gregory Price <gourry@gourry.net>
Fixes: 8dd2bc0f8e02 ("cxl/mem: Add the cxl_mem driver")
Cc: stable@vger.kernel.org
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/172988474904.476062.7961350937442459266.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
If ufshcd_rtc_work calls ufshcd_rpm_put_sync() and the pm's usage_count
is 0, we will enter the runtime suspend callback. However, the runtime
suspend callback will wait to flush ufshcd_rtc_work, causing a deadlock.
Replace ufshcd_rpm_put_sync() with ufshcd_rpm_put() to avoid the
deadlock.
Fixes: 6bf999e0eb41 ("scsi: ufs: core: Add UFS RTC support")
Cc: stable@vger.kernel.org #6.11.x
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20241024015453.21684-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If the sg_copy_buffer() call returns less than sdebug_sector_size, then
we drop out of the copy loop. However, we still report that we copied
the full expected amount, which is not proper.
Fix by keeping a running total and return that value.
Fixes: 84f3a3c01d70 ("scsi: scsi_debug: Atomic write support")
Reported-by: Colin Ian King <colin.i.king@gmail.com>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241018101655.4207-1-john.g.garry@oracle.com
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI PRM (Platform Runtime Mechanism) issue and add two
new DMI quirks, one for an ACPI IRQ override and one for lid switch
detection:
- Make acpi_parse_prmt() look for EFI_MEMORY_RUNTIME memory regions
only to comply with the UEFI specification and make PRM use
efi_guid_t instead of guid_t to avoid a compiler warning triggered
by that change (Koba Ko, Dan Carpenter)
- Add an ACPI IRQ override quirk for LG 16T90SP (Christian Heusel)
- Add a lid switch detection quirk for Samsung Galaxy Book2 (Shubham
Panwar)"
* tag 'acpi-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PRM: Clean up guid type in struct prm_handler_info
ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue
ACPI: resource: Add LG 16T90SP to irq1_level_low_skip_override[]
ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Update cpufreq documentation to match the code after recent changes
(Christian Loehle), fix a units conversion issue in the CPPC cpufreq
driver (liwei), and fix an error check in the dtpm_devfreq power
capping driver (Yuan Can)"
* tag 'pm-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: CPPC: fix perf_to_khz/khz_to_perf conversion exception
powercap: dtpm_devfreq: Fix error check against dev_pm_qos_add_request()
cpufreq: docs: Reflect latency changes in docs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Hold the rescan lock while adding devices to avoid race with
concurrent pwrctl rescan that can lead to a crash (Bartosz
Golaszewski)
- Avoid binding pwrctl driver to QCom WCN wifi if the DT lacks the
necessary PMU regulator descriptions (Bartosz Golaszewski)
* tag 'pci-v6.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/pwrctl: Abandon QCom WCN probe on pre-pwrseq device-trees
PCI: Hold rescan lock while adding devices during host probe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
- Fix some build warnings and failures with CONFIG_FB_IOMEM_FOPS and
CONFIG_FB_DEVICE
- Remove the da8xx fbdev driver
- Constify struct sbus_mmap_map and fix indentation warning
* tag 'fbdev-for-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: wm8505fb: select CONFIG_FB_IOMEM_FOPS
fbdev: da8xx: remove the driver
fbdev: Constify struct sbus_mmap_map
fbdev: nvidiafb: fix inconsistent indentation warning
fbdev: sstfb: Make CONFIG_FB_DEVICE optional
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Fix the handling of ATA commands that timeout (command that did not
receive a completion interrupt within the configured timeout time).
Commands that timeout, while also having either the FAILFAST flag
set, or the command being a passthrough command, should never be
retried. Restore this behavior (as it was before v6.12-rc1).
* tag 'ata-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata: Set DID_TIME_OUT for commands that actually timed out
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The majority of changes here are about ASoC.
There are two core changes in ASoC (the bump of minimal topology ABI
version and the fix for references of components in DAPM code), and
others are mostly various device-specific fixes for SoundWire, AMD,
Intel, SOF, Qualcomm and FSL, in addition to a few usual HD-audio
quirks and fixes"
* tag 'sound-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
ALSA: hda/realtek: Update default depop procedure
ASoC: qcom: sc7280: Fix missing Soundwire runtime stream alloc
ASoC: fsl_micfil: Add sample rate constraint
ASoC: rt722-sdca: increase clk_stop_timeout to fix clock stop issue
ALSA: hda/tas2781: select CRC32 instead of CRC32_SARWATE
ALSA: hda/realtek: Add subwoofer quirk for Acer Predator G9-593
ALSA: firewire-lib: Avoid division by zero in apply_constraint_to_size()
ASoC: fsl_micfil: Add a flag to distinguish with different volume control types
ASoC: codecs: lpass-rx-macro: fix RXn(rx,n) macro for DSM_CTL and SEC7 regs
ASoC: Change my e-mail to gmail
ASoC: Intel: soc-acpi: lnl: Add match entry for TM2 laptops
ASoC: amd: yc: Fix non-functional mic on ASUS E1404FA
ASoC: SOF: Intel: hda: Always clean up link DMA during stop
soundwire: intel_ace2x: Send PDI stream number during prepare
ASoC: SOF: Intel: hda: Handle prepare without close for non-HDA DAI's
ASoC: SOF: ipc4-topology: Do not set ALH node_id for aggregated DAIs
MAINTAINERS: Update maintainer list for MICROCHIP ASOC, SSC and MCP16502 drivers
ASoC: qcom: Select missing common Soundwire module code on SDM845
ASoC: fsl_esai: change dev_warn to dev_dbg in irq handler
ASoC: rsnd: Fix probe failure on HiHope boards due to endpoint parsing
...
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, mostly amdgpu and xe, with minor bridge and an i915
Kconfig fix. Nothing too scary and it seems to be pretty quiet.
amdgpu:
- ACPI method handling fixes
- SMU 14.x fixes
- Display idle optimization fix
- DP link layer compliance fix
- SDMA 7.x fix
- PSR-SU fix
- SWSMU fix
i915:
- Fix DRM_I915_GVT_KVMGT dependencies in Kconfig
xe:
- Increase invalidation timeout to avoid errors in some hosts
- Flush worker on timeout
- Better handling for force wake failure
- Improve argument check on user fence creation
- Don't restart parallel queues multiple times on GT reset
bridge:
- aux: Fix assignment of OF node
- tc358767: Add missing of_node_put() in error path"
* tag 'drm-fixes-2024-10-25' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe: Don't restart parallel queues multiple times on GT reset
drm/xe/ufence: Prefetch ufence addr to catch bogus address
drm/xe: Handle unreliable MMIO reads during forcewake
drm/xe/guc/ct: Flush g2h worker in case of g2h response timeout
drm/xe: Enlarge the invalidation timeout from 150 to 500
drm/amdgpu: handle default profile on on devices without fullscreen 3D
drm/amd/display: Disable PSR-SU on Parade 08-01 TCON too
drm/amdgpu: fix random data corruption for sdma 7
drm/amd/display: temp w/a for DP Link Layer compliance
drm/amd/display: temp w/a for dGPU to enter idle optimizations
drm/amd/pm: update deep sleep status on smu v14.0.2/3
drm/amd/pm: update overdrive function on smu v14.0.2/3
drm/amd/pm: update the driver-fw interface file for smu v14.0.2/3
drm/amd: Guard against bad data for ATIF ACPI method
drm/bridge: tc358767: fix missing of_node_put() in for_each_endpoint_of_node()
drm/bridge: Fix assignment of the of_node of the parent to aux bridge
i915: fix DRM_I915_GVT_KVMGT dependencies
|
|
CXL spec rev 3.0 section 8.2.9.2.1.2 defines the DRAM Event Record.
Fix decode memory event type field of DRAM Event Record.
For e.g. if value is 0x1 it will be reported as an Invalid Address
(General Media Event Record - Memory Event Type) instead of Scrub Media
ECC Error (DRAM Event Record - Memory Event Type) and so on.
Fixes: 2d6c1e6d60ba ("cxl/mem: Trace DRAM Event Record")
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://patch.msgid.link/20241014143003.1170-1-shiju.jose@huawei.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
If more than 255 colocated APs exist for the set of all
APs found during 2.4/5 GHz scanning, then the 6 GHz scan
construction will loop forever since the loop variable
has type u8, which can never reach the number found when
that's bigger than 255, and is stored in a u32 variable.
Also move it into the loops to have a smaller scope.
Using a u32 there is fine, we limit the number of APs in
the scan list and each has a limit on the number of RNR
entries due to the frame size. With a limit of 1000 scan
results, a frame size upper bound of 4096 (really it's
more like ~2300) and a TBTT entry size of at least 11,
we get an upper bound for the number of ~372k, well in
the bounds of a u32.
Cc: stable@vger.kernel.org
Fixes: eae94cf82d74 ("iwlwifi: mvm: add support for 6GHz")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219375
Link: https://patch.msgid.link/20241023091744.f4baed5c08a1.I8b417148bbc8c5d11c101e1b8f5bf372e17bf2a7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Revert commit dfdfe4be183b ("wifi: iwlwifi: remove retry loops in
start"), it turns out that there's an issue with the PNVM load
notification from firmware not getting processed, that this patch
has been somewhat successfully papering over. Since this is being
reported, revert the loop removal for now.
We will later at least clean this up to only attempt to retry if
there was a timeout, but currently we don't even bubble up the
failure reason to the correct layer, only returning NULL.
Fixes: dfdfe4be183b ("wifi: iwlwifi: remove retry loops in start")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20241022092212.4aa82a558a00.Ibdeff9c8f0d608bc97fc42024392ae763b6937b7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When we add the vif (and its default link) in fw restart we may
override the link that already exists. We take care of this but if
link 0 is a valid MLO link, then we will re-create a default link on
mvmvif->link[0] and we'll loose the real link we had there.
In non-MLO, we need to re-create the default link upon the interface
creation, this is fine. In MLO, we'll just wait for change_vif_links()
to re-build the links.
Fixes: bf976c814c86 ("wifi: iwlwifi: mvm: implement link change ops")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.385bfea1b2e9.I4a127312285ccb529cc95cc4edf6fbe1e0a136ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
1. The size of the response packet is not validated.
2. The response buffer is not freed.
Resolve these issues by switching to iwl_mvm_send_cmd_status(),
which handles both size validation and frees the buffer.
Fixes: f130bb75d881 ("iwlwifi: add FW recovery flow")
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.76c73185951e.Id3b6ca82ced2081f5ee4f33c997491d0ebda83f7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
SAR table format in ACPI and local data base are different,
So modified code to read data properly.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.f077aced4dee.I4dc618f12d01f7ad19f9f8881f6e09eea77e9a14@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
