summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-05-07drm/amdgpu/vcn: using separate VCN1_AON_SOC offsetRuijing Dong
VCN1_AON_SOC_ADDRESS_3_0 offset varies on different VCN generations, the issue in vcn4.0.5 is caused by a different VCN1_AON_SOC_ADDRESS_3_0 offset. This patch does the following: 1. use the same offset for other VCN generations. 2. use the vcn4.0.5 special offset 3. update vcn_4_0 and vcn_5_0 Acked-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Ruijing Dong <ruijing.dong@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 5c89ceda9984498b28716944633a9a01cbb2c90d) Cc: stable@vger.kernel.org
2025-05-07drm/amd/display: Fix wrong handling for AUX_DEFER caseWayne Lin
[Why] We incorrectly ack all bytes get written when the reply actually is defer. When it's defer, means sink is not ready for the request. We should retry the request. [How] Only reply all data get written when receive I2C_ACK|AUX_ACK. Otherwise, reply the number of actual written bytes received from the sink. Add some messages to facilitate debugging as well. Fixes: ad6756b4d773 ("drm/amd/display: Shift dc link aux to aux_payload") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ray Wu <ray.wu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 3637e457eb0000bc37d8bbbec95964aad2fb29fd) Cc: stable@vger.kernel.org
2025-05-07drm/amd/display: Copy AUX read reply data whenever length > 0Wayne Lin
[Why] amdgpu_dm_process_dmub_aux_transfer_sync() should return all exact data reply from the sink side. Don't do the analysis job in it. [How] Remove unnecessary check condition AUX_TRANSACTION_REPLY_AUX_ACK. Fixes: ead08b95fa50 ("drm/amd/display: Fix race condition in DPIA AUX transfer") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ray Wu <ray.wu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 9b540e3fe6796fec4fb1344f3be8952fc2f084d4) Cc: stable@vger.kernel.org
2025-05-07drm/amd/display: Remove incorrect checking in dmub aux handlerWayne Lin
[Why & How] "Request length != reply length" is expected behavior defined in spec. It's not an invalid reply. Besides, replied data handling logic is not designed to be written in amdgpu_dm_process_dmub_aux_transfer_sync(). Remove the incorrectly handling section. Fixes: ead08b95fa50 ("drm/amd/display: Fix race condition in DPIA AUX transfer") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ray Wu <ray.wu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 81b5c6fa62af62fe89ae9576f41aae37830b94cb) Cc: stable@vger.kernel.org
2025-05-07drm/amd/display: Fix the checking condition in dmub aux handlingWayne Lin
[Why & How] Fix the checking condition for detecting AUX_RET_ERROR_PROTOCOL_ERROR. It was wrongly checking by "not equals to" Reviewed-by: Ray Wu <ray.wu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 1db6c9e9b62e1a8912f0a281c941099fca678da3) Cc: stable@vger.kernel.org
2025-05-07drm/amd/display: Shift DMUB AUX reply command if necessaryWayne Lin
[Why] Defined value of dmub AUX reply command field get updated but didn't adjust dm receiving side accordingly. [How] Check the received reply command value to see if it's updated version or not. Adjust it if necessary. Fixes: ead08b95fa50 ("drm/amd/display: Fix race condition in DPIA AUX transfer") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ray Wu <ray.wu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit d5c9ade755a9afa210840708a12a8f44c0d532f4) Cc: stable@vger.kernel.org
2025-05-07drm/amd/display: Call FP Protect Before Mode Programming/Mode SupportAustin Zheng
[Why] Memory allocation occurs within dml21_validate() for adding phantom planes. May cause kernel to be tainted due to usage of FP Start. [How] Move FP start from dml21_validate to before mode programming/mode support. Calculations requiring floating point are all done within mode programming or mode support. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit fe3250f10819b411808ab9ae1d824c5fc9b59170)
2025-05-07drm/amd/display: Remove unnecessary DC_FP_START/DC_FP_ENDAlex Hung
[WHY & HOW] Remove the unnecessary DC_FP_START/DC_FP_END pair to reduce time in preempt_disable. It also fixes "BUG: sleeping function called from invalid context" error messages because of calling kzalloc with GFP_KERNEL which can sleep. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 94da0735b67b3ada90a3e2e017d306f070306f1d)
2025-05-07drm/amd/display: more liberal vmin/vmax update for freesyncAurabindo Pillai
[Why] FAMS2 expects vmin/vmax to be updated in the case when freesync is off, but supported. But we only update it when freesync is enabled. [How] Change the vsync handler such that dc_stream_adjust_vmin_vmax() its called irrespective of whether freesync is enabled. If freesync is supported, then there is no harm in updating vmin/vmax registers. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3546 Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit cfb2d41831ee5647a4ae0ea7c24971a92d5dfa0d) Cc: stable@vger.kernel.org
2025-05-07drm/amd/display: Fix invalid context error in dml helperRoman Li
[Why] "BUG: sleeping function called from invalid context" error. after: "drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()" The populate_dml_plane_cfg_from_plane_state() uses the GFP_KERNEL flag for memory allocation, which shouldn't be used in atomic contexts. The allocation is needed only for using another helper function get_scaler_data_for_plane(). [How] Modify helpers to pass a pointer to scaler_data within existing context, eliminating the need for dynamic memory allocation/deallocation and copying. Fixes: 366e77cd4923 ("drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit bd3e84bc98f81b44f2c43936bdadc3241d654259) Cc: stable@vger.kernel.org
2025-05-07xenbus: Use kref to track req lifetimeJason Andryuk
Marek reported seeing a NULL pointer fault in the xenbus_thread callstack: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: e030:__wake_up_common+0x4c/0x180 Call Trace: <TASK> __wake_up_common_lock+0x82/0xd0 process_msg+0x18e/0x2f0 xenbus_thread+0x165/0x1c0 process_msg+0x18e is req->cb(req). req->cb is set to xs_wake_up(), a thin wrapper around wake_up(), or xenbus_dev_queue_reply(). It seems like it was xs_wake_up() in this case. It seems like req may have woken up the xs_wait_for_reply(), which kfree()ed the req. When xenbus_thread resumes, it faults on the zero-ed data. Linux Device Drivers 2nd edition states: "Normally, a wake_up call can cause an immediate reschedule to happen, meaning that other processes might run before wake_up returns." ... which would match the behaviour observed. Change to keeping two krefs on each request. One for the caller, and one for xenbus_thread. Each will kref_put() when finished, and the last will free it. This use of kref matches the description in Documentation/core-api/kref.rst Link: https://lore.kernel.org/xen-devel/ZO0WrR5J0xuwDIxW@mail-itl/ Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Fixes: fd8aa9095a95 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") Cc: stable@vger.kernel.org Signed-off-by: Jason Andryuk <jason.andryuk@amd.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Message-ID: <20250506210935.5607-1-jason.andryuk@amd.com>
2025-05-07xenbus: Allow PVH dom0 a non-local xenstoreJason Andryuk
Make xenbus_init() allow a non-local xenstore for a PVH dom0 - it is currently forced to XS_LOCAL. With Hyperlaunch booting dom0 and a xenstore stubdom, dom0 can be handled as a regular XS_HVM following the late init path. Ideally we'd drop the use of xen_initial_domain() and just check for the event channel instead. However, ARM has a xen,enhanced no-xenstore mode, where the event channel and PFN would both be 0. Retain the xen_initial_domain() check, and use that for an additional check when the event channel is 0. Check the full 64bit HVM_PARAM_STORE_EVTCHN value to catch the off chance that high bits are set for the 32bit event channel. Signed-off-by: Jason Andryuk <jason.andryuk@amd.com> Change-Id: I5506da42e4c6b8e85079fefb2f193c8de17c7437 Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com> Message-ID: <20250506204456.5220-1-jason.andryuk@amd.com>
2025-05-07Merge tag 'media/v6.15-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Some Kconfig dependency fixes" * tag 'media/v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: cec: tda9950: add back i2c dependency media: i2c: lt6911uxe: add two selects to Kconfig media: platform: synopsys: VIDEO_SYNOPSYS_HDMIRX should depend on ARCH_ROCKCHIP media: i2c: lt6911uxe: Fix Kconfig dependencies: media: vivid: fix FB dependency
2025-05-07xen: swiotlb: Use swiotlb bouncing if kmalloc allocation demands itJohn Ernberg
Xen swiotlb support was missed when the patch set starting with 4ab5f8ec7d71 ("mm/slab: decouple ARCH_KMALLOC_MINALIGN from ARCH_DMA_MINALIGN") was merged. When running Xen on iMX8QXP, a SoC without IOMMU, the effect was that USB transfers ended up corrupted when there was more than one URB inflight at the same time. Add a call to dma_kmalloc_needs_bounce() to make sure that allocations too small for DMA get bounced via swiotlb. Closes: https://lore.kernel.org/linux-usb/ab2776f0-b838-4cf6-a12a-c208eb6aad59@actia.se/ Fixes: 4ab5f8ec7d71 ("mm/slab: decouple ARCH_KMALLOC_MINALIGN from ARCH_DMA_MINALIGN") Cc: stable@kernel.org # v6.5+ Signed-off-by: John Ernberg <john.ernberg@actia.se> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com> Message-ID: <20250502114043.1968976-2-john.ernberg@actia.se>
2025-05-07s390/pci: Fix duplicate pci_dev_put() in disable_slot() when PF has child VFsNiklas Schnelle
With commit bcb5d6c76903 ("s390/pci: introduce lock to synchronize state of zpci_dev's") the code to ignore power off of a PF that has child VFs was changed from a direct return to a goto to the unlock and pci_dev_put() section. The change however left the existing pci_dev_put() untouched resulting in a doubple put. This can subsequently cause a use after free if the struct pci_dev is released in an unexpected state. Fix this by removing the extra pci_dev_put(). Cc: stable@vger.kernel.org Fixes: bcb5d6c76903 ("s390/pci: introduce lock to synchronize state of zpci_dev's") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2025-05-07nvme: unblock ctrl state transition for firmware updateDaniel Wagner
The original nvme subsystem design didn't have a CONNECTING state; the state machine allowed transitions from RESETTING to LIVE directly. With the introduction of nvme fabrics the CONNECTING state was introduce. Over time the nvme-pci started to use the CONNECTING state as well. Eventually, a bug fix for the nvme-fc started to depend that the only valid transition to LIVE was from CONNECTING. Though this change didn't update the firmware update handler which was still depending on RESETTING to LIVE transition. The simplest way to address it for the time being is to switch into CONNECTING state before going to LIVE state. Fixes: d2fe192348f9 ("nvme: only allow entering LIVE from CONNECTING state") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Daniel Wagner <wagi@kernel.org> Closes: https://lore.kernel.org/all/0134ea15-8d5f-41f7-9e9a-d7e6d82accaa@roeck-us.net Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2025-05-06Merge tag 'wireless-2025-05-06' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Couple of fixes: * iwlwifi: add two missing device entries * cfg80211: fix a potential out-of-bounds access * mac80211: fix format of TID to link mapping action frames * tag 'wireless-2025-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: iwlwifi: add support for Killer on MTL wifi: mac80211: fix the type of status_code for negotiated TID to Link Mapping wifi: cfg80211: fix out-of-bounds access during multi-link element defragmentation ==================== Link: https://patch.msgid.link/20250506203506.158818-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-06Merge tag 'linux-can-fixes-for-6.15-20250506' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2025-05-06 The first patch is by Antonios Salios and adds a missing spin_lock_init() to the m_can driver. The next 3 patches are by me and fix the unregistration order in the mcp251xfd, rockchip_canfd and m_can driver. The last patch is by Oliver Hartkopp and fixes RCU and BH locking/handling in the CAN gw protocol. * tag 'linux-can-fixes-for-6.15-20250506' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: gw: fix RCU/BH usage in cgw_create_job() can: mcan: m_can_class_unregister(): fix order of unregistration calls can: rockchip_canfd: rkcanfd_remove(): fix order of unregistration calls can: mcp251xfd: mcp251xfd_remove(): fix order of unregistration calls can: mcp251xfd: fix TDC setting for low data bit rates can: m_can: m_can_class_allocate_dev(): initialize spin lock on device probe ==================== Link: https://patch.msgid.link/20250506135939.652543-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-06ice: use DSN instead of PCI BDF for ice_adapter indexPrzemek Kitszel
Use Device Serial Number instead of PCI bus/device/function for the index of struct ice_adapter. Functions on the same physical device should point to the very same ice_adapter instance, but with two PFs, when at least one of them is PCI-e passed-through to a VM, it is no longer the case - PFs will get seemingly random PCI BDF values, and thus indices, what finally leds to each of them being on their own instance of ice_adapter. That causes them to don't attempt any synchronization of the PTP HW clock usage, or any other future resources. DSN works nicely in place of the index, as it is "immutable" in terms of virtualization. Fixes: 0e2bddf9e5f9 ("ice: add ice_adapter for shared data across PFs on the same NIC") Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20250505161939.2083581-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-07rust: clean Rust 1.88.0's `clippy::uninlined_format_args` lintMiguel Ojeda
Starting with Rust 1.88.0 (expected 2025-06-26) [1], `rustc` may move back the `uninlined_format_args` to `style` from `pedantic` (it was there waiting for rust-analyzer suppotr), and thus we will start to see lints like: warning: variables can be used directly in the `format!` string --> rust/macros/kunit.rs:105:37 | 105 | let kunit_wrapper_fn_name = format!("kunit_rust_wrapper_{}", test); | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#uninlined_format_args help: change this to | 105 - let kunit_wrapper_fn_name = format!("kunit_rust_wrapper_{}", test); 105 + let kunit_wrapper_fn_name = format!("kunit_rust_wrapper_{test}"); There is even a case that is a pure removal: warning: variables can be used directly in the `format!` string --> rust/macros/module.rs:51:13 | 51 | format!("{field}={content}\0", field = field, content = content) | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#uninlined_format_args help: change this to | 51 - format!("{field}={content}\0", field = field, content = content) 51 + format!("{field}={content}\0") The lints all seem like nice cleanups, thus just apply them. We may want to disable `allow-mixed-uninlined-format-args` in the future. Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs). Link: https://github.com/rust-lang/rust-clippy/pull/14160 [1] Acked-by: Benno Lossin <lossin@kernel.org> Reviewed-by: Tamir Duberstein <tamird@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20250502140237.1659624-6-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-05-06wifi: iwlwifi: add support for Killer on MTLJohannes Berg
For now, we need another entry for these devices, this will be changed completely for 6.16. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219926 Link: https://patch.msgid.link/20250506214258.2efbdc9e9a82.I31915ec252bd1c74bd53b89a0e214e42a74b6f2e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-06vfio/pci: Align huge faults to orderAlex Williamson
The vfio-pci huge_fault handler doesn't make any attempt to insert a mapping containing the faulting address, it only inserts mappings if the faulting address and resulting pfn are aligned. This works in a lot of cases, particularly in conjunction with QEMU where DMA mappings linearly fault the mmap. However, there are configurations where we don't get that linear faulting and pages are faulted on-demand. The scenario reported in the bug below is such a case, where the physical address width of the CPU is greater than that of the IOMMU, resulting in a VM where guest firmware has mapped device MMIO beyond the address width of the IOMMU. In this configuration, the MMIO is faulted on demand and tracing indicates that occasionally the faults generate a VM_FAULT_OOM. Given the use case, this results in a "error: kvm run failed Bad address", killing the VM. The host is not under memory pressure in this test, therefore it's suspected that VM_FAULT_OOM is actually the result of a NULL return from __pte_offset_map_lock() in the get_locked_pte() path from insert_pfn(). This suggests a potential race inserting a pte concurrent to a pmd, and maybe indicates some deficiency in the mm layer properly handling such a case. Nevertheless, Peter noted the inconsistency of vfio-pci's huge_fault handler where our mapping granularity depends on the alignment of the faulting address relative to the order rather than aligning the faulting address to the order to more consistently insert huge mappings. This change not only uses the page tables more consistently and efficiently, but as any fault to an aligned page results in the same mapping, the race condition suspected in the VM_FAULT_OOM is avoided. Reported-by: Adolfo <adolfotregosa@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220057 Fixes: 09dfc8a5f2ce ("vfio/pci: Fallback huge faults for unaligned pfn") Cc: stable@vger.kernel.org Tested-by: Adolfo <adolfotregosa@gmail.com> Co-developed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Link: https://lore.kernel.org/r/20250502224035.3183451-1-alex.williamson@redhat.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2025-05-06Merge tag 'for-6.15/dm-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mikulas Patocka: - fix reading past the end of allocated memory - fix missing dm_put_live_table() in dm_keyslot_evict() * tag 'for-6.15/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix copying after src array boundaries dm: add missing unlock on in dm_keyslot_evict()
2025-05-06can: mcan: m_can_class_unregister(): fix order of unregistration callsMarc Kleine-Budde
If a driver is removed, the driver framework invokes the driver's remove callback. A CAN driver's remove function calls unregister_candev(), which calls net_device_ops::ndo_stop further down in the call stack for interfaces which are in the "up" state. The removal of the module causes a warning, as can_rx_offload_del() deletes the NAPI, while it is still active, because the interface is still up. To fix the warning, first unregister the network interface, which calls net_device_ops::ndo_stop, which disables the NAPI, and then call can_rx_offload_del(). Fixes: 1be37d3b0414 ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250502-can-rx-offload-del-v1-3-59a9b131589d@pengutronix.de Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-06can: rockchip_canfd: rkcanfd_remove(): fix order of unregistration callsMarc Kleine-Budde
If a driver is removed, the driver framework invokes the driver's remove callback. A CAN driver's remove function calls unregister_candev(), which calls net_device_ops::ndo_stop further down in the call stack for interfaces which are in the "up" state. The removal of the module causes a warning, as can_rx_offload_del() deletes the NAPI, while it is still active, because the interface is still up. To fix the warning, first unregister the network interface, which calls net_device_ops::ndo_stop, which disables the NAPI, and then call can_rx_offload_del(). Fixes: ff60bfbaf67f ("can: rockchip_canfd: add driver for Rockchip CAN-FD controller") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250502-can-rx-offload-del-v1-2-59a9b131589d@pengutronix.de Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-06can: mcp251xfd: mcp251xfd_remove(): fix order of unregistration callsMarc Kleine-Budde
If a driver is removed, the driver framework invokes the driver's remove callback. A CAN driver's remove function calls unregister_candev(), which calls net_device_ops::ndo_stop further down in the call stack for interfaces which are in the "up" state. With the mcp251xfd driver the removal of the module causes the following warning: | WARNING: CPU: 0 PID: 352 at net/core/dev.c:7342 __netif_napi_del_locked+0xc8/0xd8 as can_rx_offload_del() deletes the NAPI, while it is still active, because the interface is still up. To fix the warning, first unregister the network interface, which calls net_device_ops::ndo_stop, which disables the NAPI, and then call can_rx_offload_del(). Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250502-can-rx-offload-del-v1-1-59a9b131589d@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-06can: mcp251xfd: fix TDC setting for low data bit ratesKelsey Maes
The TDC is currently hardcoded enabled. This means that even for lower CAN-FD data bitrates (with a DBRP (data bitrate prescaler) > 2) a TDC is configured. This leads to a bus-off condition. ISO 11898-1 section 11.3.3 says "Transmitter delay compensation" (TDC) is only applicable if DBRP is 1 or 2. To fix the problem, switch the driver to use the TDC calculation provided by the CAN driver framework (which respects ISO 11898-1 section 11.3.3). This has the positive side effect that userspace can control TDC as needed. Demonstration of the feature in action: | $ ip link set can0 up type can bitrate 125000 dbitrate 500000 fd on | $ ip -details link show can0 | 3: can0: <NOARP,UP,LOWER_UP,ECHO> mtu 72 qdisc pfifo_fast state UP mode DEFAULT group default qlen 10 | link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 | can <FD> state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 0 | bitrate 125000 sample-point 0.875 | tq 50 prop-seg 69 phase-seg1 70 phase-seg2 20 sjw 10 brp 2 | mcp251xfd: tseg1 2..256 tseg2 1..128 sjw 1..128 brp 1..256 brp_inc 1 | dbitrate 500000 dsample-point 0.875 | dtq 125 dprop-seg 6 dphase-seg1 7 dphase-seg2 2 dsjw 1 dbrp 5 | mcp251xfd: dtseg1 1..32 dtseg2 1..16 dsjw 1..16 dbrp 1..256 dbrp_inc 1 | tdcv 0..63 tdco 0..63 | clock 40000000 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 tso_max_size 65536 tso_max_segs 65535 gro_max_size 65536 parentbus spi parentdev spi0.0 | $ ip link set can0 up type can bitrate 1000000 dbitrate 4000000 fd on | $ ip -details link show can0 | 3: can0: <NOARP,UP,LOWER_UP,ECHO> mtu 72 qdisc pfifo_fast state UP mode DEFAULT group default qlen 10 | link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 | can <FD,TDC-AUTO> state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 0 | bitrate 1000000 sample-point 0.750 | tq 25 prop-seg 14 phase-seg1 15 phase-seg2 10 sjw 5 brp 1 | mcp251xfd: tseg1 2..256 tseg2 1..128 sjw 1..128 brp 1..256 brp_inc 1 | dbitrate 4000000 dsample-point 0.700 | dtq 25 dprop-seg 3 dphase-seg1 3 dphase-seg2 3 dsjw 1 dbrp 1 | tdco 7 | mcp251xfd: dtseg1 1..32 dtseg2 1..16 dsjw 1..16 dbrp 1..256 dbrp_inc 1 | tdcv 0..63 tdco 0..63 | clock 40000000 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 tso_max_size 65536 tso_max_segs 65535 gro_max_size 65536 parentbus spi parentdev spi0.0 There has been some confusion about the MCP2518FD using a relative or absolute TDCO due to the datasheet specifying a range of [-64,63]. I have a custom board with a 40 MHz clock and an estimated loop delay of 100 to 216 ns. During testing at a data bit rate of 4 Mbit/s I found that using can_get_relative_tdco() resulted in bus-off errors. The final TDCO value was 1 which corresponds to a 10% SSP in an absolute configuration. This behavior is expected if the TDCO value is really absolute and not relative. Using priv->can.tdc.tdco instead results in a final TDCO of 8, setting the SSP at exactly 80%. This configuration works. The automatic, manual, and off TDC modes were tested at speeds up to, and including, 8 Mbit/s on real hardware and behave as expected. Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Reported-by: Kelsey Maes <kelsey@vpprocess.com> Closes: https://lore.kernel.org/all/C2121586-C87F-4B23-A933-845362C29CA1@vpprocess.com Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Kelsey Maes <kelsey@vpprocess.com> Link: https://patch.msgid.link/20250430161501.79370-1-kelsey@vpprocess.com [mkl: add comment] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-06can: m_can: m_can_class_allocate_dev(): initialize spin lock on device probeAntonios Salios
The spin lock tx_handling_spinlock in struct m_can_classdev is not being initialized. This leads the following spinlock bad magic complaint from the kernel, eg. when trying to send CAN frames with cansend from can-utils: | BUG: spinlock bad magic on CPU#0, cansend/95 | lock: 0xff60000002ec1010, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 | CPU: 0 UID: 0 PID: 95 Comm: cansend Not tainted 6.15.0-rc3-00032-ga79be02bba5c #5 NONE | Hardware name: MachineWare SIM-V (DT) | Call Trace: | [<ffffffff800133e0>] dump_backtrace+0x1c/0x24 | [<ffffffff800022f2>] show_stack+0x28/0x34 | [<ffffffff8000de3e>] dump_stack_lvl+0x4a/0x68 | [<ffffffff8000de70>] dump_stack+0x14/0x1c | [<ffffffff80003134>] spin_dump+0x62/0x6e | [<ffffffff800883ba>] do_raw_spin_lock+0xd0/0x142 | [<ffffffff807a6fcc>] _raw_spin_lock_irqsave+0x20/0x2c | [<ffffffff80536dba>] m_can_start_xmit+0x90/0x34a | [<ffffffff806148b0>] dev_hard_start_xmit+0xa6/0xee | [<ffffffff8065b730>] sch_direct_xmit+0x114/0x292 | [<ffffffff80614e2a>] __dev_queue_xmit+0x3b0/0xaa8 | [<ffffffff8073b8fa>] can_send+0xc6/0x242 | [<ffffffff8073d1c0>] raw_sendmsg+0x1a8/0x36c | [<ffffffff805ebf06>] sock_write_iter+0x9a/0xee | [<ffffffff801d06ea>] vfs_write+0x184/0x3a6 | [<ffffffff801d0a88>] ksys_write+0xa0/0xc0 | [<ffffffff801d0abc>] __riscv_sys_write+0x14/0x1c | [<ffffffff8079ebf8>] do_trap_ecall_u+0x168/0x212 | [<ffffffff807a830a>] handle_exception+0x146/0x152 Initializing the spin lock in m_can_class_allocate_dev solves that problem. Fixes: 1fa80e23c150 ("can: m_can: Introduce a tx_fifo_in_flight counter") Signed-off-by: Antonios Salios <antonios@mwa.re> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20250425111744.37604-2-antonios@mwa.re Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-05-06dm: fix copying after src array boundariesTudor Ambarus
The blammed commit copied to argv the size of the reallocated argv, instead of the size of the old_argv, thus reading and copying from past the old_argv allocated memory. Following BUG_ON was hit: [ 3.038929][ T1] kernel BUG at lib/string_helpers.c:1040! [ 3.039147][ T1] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP ... [ 3.056489][ T1] Call trace: [ 3.056591][ T1] __fortify_panic+0x10/0x18 (P) [ 3.056773][ T1] dm_split_args+0x20c/0x210 [ 3.056942][ T1] dm_table_add_target+0x13c/0x360 [ 3.057132][ T1] table_load+0x110/0x3ac [ 3.057292][ T1] dm_ctl_ioctl+0x424/0x56c [ 3.057457][ T1] __arm64_sys_ioctl+0xa8/0xec [ 3.057634][ T1] invoke_syscall+0x58/0x10c [ 3.057804][ T1] el0_svc_common+0xa8/0xdc [ 3.057970][ T1] do_el0_svc+0x1c/0x28 [ 3.058123][ T1] el0_svc+0x50/0xac [ 3.058266][ T1] el0t_64_sync_handler+0x60/0xc4 [ 3.058452][ T1] el0t_64_sync+0x1b0/0x1b4 [ 3.058620][ T1] Code: f800865e a9bf7bfd 910003fd 941f48aa (d4210000) [ 3.058897][ T1] ---[ end trace 0000000000000000 ]--- [ 3.059083][ T1] Kernel panic - not syncing: Oops - BUG: Fatal exception Fix it by copying the size of src, and not the size of dst, as it was. Fixes: 5a2a6c428190 ("dm: always update the array size in realloc_argv on success") Cc: stable@vger.kernel.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-05-06drm/panel: simple: Update timings for AUO G101EVN010Kevin Baker
Switch to panel timings based on datasheet for the AUO G101EVN01.0 LVDS panel. Default timings were tested on the panel. Previous mode-based timings resulted in horizontal display shift. Signed-off-by: Kevin Baker <kevinb@ventureresearch.com> Fixes: 4fb86404a977 ("drm/panel: simple: Add AUO G101EVN010 panel support") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com
2025-05-06net: ethernet: mtk_eth_soc: do not reset PSE when setting FEFrank Wunderlich
Remove redundant PSE reset. When setting FE register there is no need to reset PSE, doing so may cause FE to work abnormal. Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/3a5223473e086a4b54a2b9a44df7d9ddcc2bc75a Fixes: dee4dd10c79aa ("net: ethernet: mtk_eth_soc: ppe: add support for multiple PPEs") Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://patch.msgid.link/18f0ac7d83f82defa3342c11ef0d1362f6b81e88.1746406763.git.daniel@makrotopia.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-06net: ethernet: mtk_eth_soc: reset all TX queues on DMA freeDaniel Golle
The purpose of resetting the TX queue is to reset the byte and packet count as well as to clear the software flow control XOFF bit. MediaTek developers pointed out that netdev_reset_queue would only resets queue 0 of the network device. Queues that are not reset may cause unexpected issues. Packets may stop being sent after reset and "transmit timeout" log may be displayed. Import fix from MediaTek's SDK to resolve this issue. Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/319c0d9905579a46dc448579f892f364f1f84818 Fixes: f63959c7eec31 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Link: https://patch.msgid.link/c9ff9adceac4f152239a0f65c397f13547639175.1746406763.git.daniel@makrotopia.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-06drm/ttm: Remove the struct ttm_backup abstractionThomas Hellström
The abstraction was previously added to support separate ttm_backup implementations. However with the current implementation casting from a struct file to a struct ttm_backup, we run into trouble since struct file may have randomized the layout and gcc complains. Remove the struct ttm_backup abstraction Cc: dri-devel@lists.freedesktop.org Cc: Matthew Brost <matthew.brost@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Christian König <christian.koenig@amd.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Reported-by: Kees Cook <kees@kernel.org> Closes: https://lore.kernel.org/dri-devel/9c8dbbafdaf9f3f089da2cde5a772d69579b3795.camel@linux.intel.com/T/#mb153ab9216cb813b92bdeb36f391ad4808c2ba29 Suggested-by: Christian König <christian.koenig@amd.com> Fixes: 70d645deac98 ("drm/ttm: Add helpers for shrinking") Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20250502130014.3156-1-thomas.hellstrom@linux.intel.com
2025-05-06drm/ttm: Fix ttm_backup kerneldocThomas Hellström
The docs were not properly updated from an earlier version of the code. Fixes: e7b5d23e5d47 ("drm/ttm: Provide a shmem backup implementation") Cc: Christian König <christian.koenig@amd.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250502130101.3185-1-thomas.hellstrom@linux.intel.com
2025-05-06i2c: omap: fix deprecated of_property_read_bool() useJohan Hovold
Using of_property_read_bool() for non-boolean properties is deprecated and results in a warning during runtime since commit c141ecc3cecd ("of: Warn when of_property_read_bool() is used on non-boolean properties"). Fixes: b6ef830c60b6 ("i2c: omap: Add support for setting mux") Cc: Jayesh Choudhary <j-choudhary@ti.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com> Link: https://lore.kernel.org/r/20250415075230.16235-1-johan+linaro@kernel.org Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2025-05-05virtio-net: free xsk_buffs on error in virtnet_xsk_pool_enable()Jakub Kicinski
The selftests added to our CI by Bui Quang Minh recently reveals that there is a mem leak on the error path of virtnet_xsk_pool_enable(): unreferenced object 0xffff88800a68a000 (size 2048): comm "xdp_helper", pid 318, jiffies 4294692778 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 0): __kvmalloc_node_noprof+0x402/0x570 virtnet_xsk_pool_enable+0x293/0x6a0 (drivers/net/virtio_net.c:5882) xp_assign_dev+0x369/0x670 (net/xdp/xsk_buff_pool.c:226) xsk_bind+0x6a5/0x1ae0 __sys_bind+0x15e/0x230 __x64_sys_bind+0x72/0xb0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Acked-by: Jason Wang <jasowang@redhat.com> Fixes: e9f3962441c0 ("virtio_net: xsk: rx: support fill with xsk buffer") Link: https://patch.msgid.link/20250430163836.3029761-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-05virtio-net: don't re-enable refill work too early when NAPI is disabledJakub Kicinski
Commit 4bc12818b363 ("virtio-net: disable delayed refill when pausing rx") fixed a deadlock between reconfig paths and refill work trying to disable the same NAPI instance. The refill work can't run in parallel with reconfig because trying to double-disable a NAPI instance causes a stall under the instance lock, which the reconfig path needs to re-enable the NAPI and therefore unblock the stalled thread. There are two cases where we re-enable refill too early. One is in the virtnet_set_queues() handler. We call it when installing XDP: virtnet_rx_pause_all(vi); ... virtnet_napi_tx_disable(..); ... virtnet_set_queues(..); ... virtnet_rx_resume_all(..); We want the work to be disabled until we call virtnet_rx_resume_all(), but virtnet_set_queues() kicks it before NAPIs were re-enabled. The other case is a more trivial case of mis-ordering in __virtnet_rx_resume() found by code inspection. Taking the spin lock in virtnet_set_queues() (requested during review) may be unnecessary as we are under rtnl_lock and so are all paths writing to ->refill_enabled. Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Bui Quang Minh <minhquangbui99@gmail.com> Fixes: 4bc12818b363 ("virtio-net: disable delayed refill when pausing rx") Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()") Link: https://patch.msgid.link/20250430163758.3029367-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-05Merge tag 'soc-fixes-6.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC fixes from Arnd Bergmann: "The main changes are once more for the NXP i.MX platform, addressing multiple regressions in recent devicetree updates for the i.MX8MM and i.MX6ULL SoCs, a PCIe fix for i.MX9 and a MAINTAINERS file update to disambiguate NXP i.MX SoCs from Sony IMX image sensors. The stm32 platform devicetree files get some compatibility fixes for the interrupt controller node. Another compatibility fix is done for the Arm Morello platform's cache controller node. The code changes are all for firmware drivers, fixing kernel-side bugs on the Arm FF-A and SCMI drivers" * tag 'soc-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: st: Use 128kB size for aliased GIC400 register access on stm32mp23 SoCs arm64: dts: st: Adjust interrupt-controller for stm32mp23 SoCs arm64: dts: st: Use 128kB size for aliased GIC400 register access on stm32mp21 SoCs arm64: dts: st: Adjust interrupt-controller for stm32mp21 SoCs arm64: dts: st: Use 128kB size for aliased GIC400 register access on stm32mp25 SoCs arm64: dts: st: Adjust interrupt-controller for stm32mp25 SoCs arm64: dts: imx8mm-verdin: Link reg_usdhc2_vqmmc to usdhc2 MAINTAINERS: add exclude for dt-bindings to imx entry ARM: dts: opos6ul: add ksz8081 phy properties arm64: dts: imx95: Correct the range of PCIe app-reg region arm64: dts: imx8mp: configure GPU and NPU clocks in nominal DTSI arm64: dts: morello: Fix-up cache nodes firmware: arm_ffa: Skip Rx buffer ownership release if not acquired firmware: arm_scmi: Fix timeout checks on polling path firmware: arm_scmi: Balance device refcount when destroying devices
2025-05-05s390/dcssblk: Fix build error with CONFIG_DAX=m and CONFIG_DCSSBLK=yGerald Schaefer
After commit 653d7825c149 ("dcssblk: mark DAX broken, remove FS_DAX_LIMITED support") moved the "select DAX" from config DCSSBLK to the new config DCSSBLK_DAX, randconfig tests could result in build errors like this: s390-linux-ld: drivers/s390/block/dcssblk.o: in function `dcssblk_shared_store': drivers/s390/block/dcssblk.c:417: undefined reference to `kill_dax' s390-linux-ld: drivers/s390/block/dcssblk.c:418: undefined reference to `put_dax' This is because it's now possible to have CONFIG_DCSSBLK=y, but CONFIG_DAX=m. Fix this by adding "depends on DAX || DAX=n" to config DCSSBLK, to make it explicit that we want either no DAX, or the same "y/m" for both config DAX and DCSSBLK, similar to config BLK_DEV_DM. This also requires removing the "select DAX" from config DCSSBLK_DAX, or else there would be a recursive dependency detected. DCSSBLK_DAX is marked as BROKEN at the moment, and won't work well with DAX anyway, so it doesn't really matter if it is selected. Fixes: 653d7825c149 ("dcssblk: mark DAX broken, remove FS_DAX_LIMITED support") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202504291604.pvjonhWX-lkp@intel.com/ Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2025-05-05loop: Add sanity check for read/write_iterLizhi Xu
Some file systems do not support read_iter/write_iter, such as selinuxfs in this issue. So before calling them, first confirm that the interface is supported and then call it. It is releavant in that vfs_iter_read/write have the check, and removal of their used caused szybot to be able to hit this issue. Fixes: f2fed441c69b ("loop: stop using vfs_iter__{read,write} for buffered I/O") Reported-by: syzbot+6af973a3b8dfd2faefdc@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6af973a3b8dfd2faefdc Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250428143626.3318717-1-lizhi.xu@windriver.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-05-05drm/i915/slpc: Balance the inc/dec for num_waitersVinay Belgaumkar
As seen in some recent failures, SLPC num_waiters value is < 0. This happens because the inc/dec are not balanced. We should skip decrement for the same conditions as the increment. Currently, we do that for power saving profile mode. This patch also ensures that num_waiters is incremented in the case min_softlimit is at boost freq. It ensures that we don't reduce the frequency while this request is in flight. v2: Add Fixes tags Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13598 Fixes: f864a29afc32 ("drm/i915/slpc: Optmize waitboost for SLPC") Fixes: 4a82ceb04ad4 ("drm/i915/slpc: Add sysfs for SLPC power profiles") Cc: Sk Anirban <sk.anirban@intel.com> Reviewed-by: Sk Anirban <sk.anirban@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://lore.kernel.org/r/20250428183555.3250021-1-vinay.belgaumkar@intel.com (cherry picked from commit d26e55085f4b7a63677670db827541209257b313) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-05-04Merge tag 'edac_urgent_for_v6.15_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fixes from Borislav Petkov: - Test the correct structure member when handling correctable errors and avoid spurious interrupts, in altera_edac * tag 'edac_urgent_for_v6.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/altera: Set DDR and SDMMC interrupt mask before registration EDAC/altera: Test the correct error reg offset
2025-05-04Merge tag 'irq-urgent-2025-05-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: - Prevent NULL pointer dereference in msi_domain_debug_show() - Fix crash in the qcom-mpm irqchip driver when configuring interrupts for non-wake GPIOs * tag 'irq-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs genirq/msi: Prevent NULL pointer dereference in msi_domain_debug_show()
2025-05-03Merge tag 'i2c-for-6.15-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: - imx-lpi2c: fix clock error handling sequence in probe * tag 'i2c-for-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: imx-lpi2c: Fix clock count when probe defers
2025-05-03Merge tag 'sound-6.15-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A bunch of small fixes. Mostly driver specific. - An OOB access fix in core UMP rawmidi conversion code - Fix for ASoC DAPM hw_params widget sequence - Make retry of usb_set_interface() errors for flaky devices - Fix redundant USB MIDI name strings - Quirks for various HP and ASUS models with HD-audio, and Jabra Evolve 65 USB-audio - Cirrus Kunit test fixes - Various fixes for ASoC Intel, stm32, renesas, imx-card, and simple-card" * tag 'sound-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits) ASoC: amd: ps: fix for irq handler return status ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction ASoC: intel/sdw_utils: Add volume limit to cs35l56 speakers ASoC: intel/sdw_utils: Add volume limit to cs42l43 speakers ASoC: stm32: sai: add a check on minimal kernel frequency ASoC: stm32: sai: skip useless iterations on kernel rate loop ALSA: hda/realtek - Add more HP laptops which need mute led fixup ALSA: hda/realtek: Fix built-mic regression on other ASUS models ASoC: Intel: catpt: avoid type mismatch in dev_dbg() format ALSA: usb-audio: Fix duplicated name in MIDI substream names ALSA: ump: Fix buffer overflow at UMP SysEx message conversion ALSA: usb-audio: Add second USB ID for Jabra Evolve 65 headset ALSA: hda/realtek: Add quirk for HP Spectre x360 15-df1xxx ALSA: hda: Apply volume control on speaker+lineout for HP EliteStudio AIO ASoC: Intel: bytcr_rt5640: Add DMI quirk for Acer Aspire SW3-013 ASoC: amd: acp: Fix devm_snd_soc_register_card(acp-pdm-mach) failure ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot ASoC: amd: acp: Fix NULL pointer deref on acp resume path ASoC: renesas: rz-ssi: Use NOIRQ_SYSTEM_SLEEP_PM_OPS() ASoC: soc-acpi-intel-ptl-match: add empty item to ptl_cs42l43_l3[] ...
2025-05-02Merge tag 'spi-fix-v6.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A fairly small pile of fixes, plus one new compatible string addition to the Synopsis driver for a new platform. The most notable thing is the fix for divide by zeros in spi-mem if an operation has no dummy bytes" * tag 'spi-fix-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: tegra114: Don't fail set_cs_timing when delays are zero spi: spi-qpic-snand: fix NAND_READ_LOCATION_2 register handling spi: spi-mem: Add fix to avoid divide error spi: dt-bindings: snps,dw-apb-ssi: Add compatible for SOPHGO SG2042 SoC spi: dt-bindings: snps,dw-apb-ssi: Merge duplicate compatible entry spi: spi-qpic-snand: propagate errors from qcom_spi_block_erase() spi: stm32-ospi: Fix an error handling path in stm32_ospi_probe()
2025-05-02Merge tag 'pm-6.15-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix three recent regressions, two in cpufreq and one in the Intel Soundwire driver, and an unchecked MSR access in the intel_pstate driver: - Fix a recent regression causing systems where frequency tables are used by cpufreq to have issues with setting frequency limits (Rafael Wysocki) - Fix a recent regressions causing frequency boost settings to become out-of-sync if platform firmware updates the registers associated with frequency boost during system resume (Viresh Kumar) - Fix a recent regression causing resume failures to occur in the Intel Soundwire driver if the device handled by it is in runtime suspend before a system-wide suspend (Rafael Wysocki) - Fix an unchecked MSR aceess in the intel_pstate driver occurring when CPUID indicates no turbo, but the driver attempts to enable turbo frequencies due to a misleading value read from an MSR (Srinivas Pandruvada)" * tag 'pm-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode soundwire: intel_auxdevice: Fix system suspend/resume handling cpufreq: Fix setting policy limits when frequency tables are used cpufreq: ACPI: Re-sync CPU boost state on system resume
2025-05-02Merge tag 'drm-fixes-2025-05-03' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly drm fixes, amdgpu and xe as usual, the new adp driver has a bunch of vblank fixes, then a bunch of small fixes across the board. Seems about the right level for this time in the release cycle. ttm: - docs warning fix kunit - fix leak in shmem tests fdinfo: - driver unbind race fix amdgpu: - Fix possible UAF in HDCP - XGMI dma-buf fix - NBIO 7.11 fix - VCN 5.0.1 fix xe: - EU stall locking fix and disabling on VF - Documentation fix kernel version supporting hwmon entries - SVM fixes on error handling i915: - Fix build for CONFIG_DRM_I915_PXP=n nouveau: - fix race condition in fence handling ivpu: - interrupt handling fix - D0i2 test mode fix adp: - vblank fixes mipi-dbi: - timing fix" * tag 'drm-fixes-2025-05-03' of https://gitlab.freedesktop.org/drm/kernel: (23 commits) drm/gpusvm: set has_dma_mapping inside mapping loop drm/xe/hwmon: Fix kernel version documentation for temperature drm/xe/eustall: Do not support EU stall on SRIOV VF drm/xe/eustall: Resolve a possible circular locking dependency drm/amdgpu: Add DPG pause for VCN v5.0.1 drm/amdgpu: Fix offset for HDP remap in nbio v7.11 drm/amdgpu: Fail DMABUF map of XGMI-accessible memory drm/amd/display: Fix slab-use-after-free in hdcp drm/mipi-dbi: Fix blanking for non-16 bit formats drm/tests: shmem: Fix memleak drm/xe/guc: Fix capture of steering registers drm/xe/svm: fix dereferencing error pointer in drm_gpusvm_range_alloc() drm: Select DRM_KMS_HELPER from DRM_DEBUG_DP_MST_TOPOLOGY_REFS drm: adp: Remove pointless irq_lock spin lock drm: adp: Enable vblank interrupts in crtc's .atomic_enable drm: adp: Handle drm_crtc_vblank_get() errors drm: adp: Use spin_lock_irqsave for drm device event_lock drm/fdinfo: Protect against driver unbind drm/ttm: fix the warning for hit_low and evict_low accel/ivpu: Fix the D0i2 disable test mode ...
2025-05-02Merge branch 'pm-cpufreq'Rafael J. Wysocki
Merge cpufreq fixes for 6.15-rc5: - Fix a recent regression causing systems where frequency tables are used by cpufreq to have issues with setting frequency limits (Rafael Wysocki). - Fix a recent regressions causing frequency boost settings to become out-of-sync if platform firmware updates the registers associated with them during system resume (Viresh Kumar). - Fix an unchecked MSR aceess in the intel_pstate driver occurring when CPUID indicates no turbo, but the driver attempts to enable turbo frequencies due to a misleading value read from an MSR (Srinivas Pandruvada). * pm-cpufreq: cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode cpufreq: Fix setting policy limits when frequency tables are used cpufreq: ACPI: Re-sync CPU boost state on system resume
2025-05-02drm/v3d: Add job to pending list if the reset was skippedMaíra Canal
When a CL/CSD job times out, we check if the GPU has made any progress since the last timeout. If so, instead of resetting the hardware, we skip the reset and let the timer get rearmed. This gives long-running jobs a chance to complete. However, when `timedout_job()` is called, the job in question is removed from the pending list, which means it won't be automatically freed through `free_job()`. Consequently, when we skip the reset and keep the job running, the job won't be freed when it finally completes. This situation leads to a memory leak, as exposed in [1] and [2]. Similarly to commit 704d3d60fec4 ("drm/etnaviv: don't block scheduler when GPU is still active"), this patch ensures the job is put back on the pending list when extending the timeout. Cc: stable@vger.kernel.org # 6.0 Reported-by: Daivik Bhatia <dtgs1208@gmail.com> Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12227 [1] Closes: https://github.com/raspberrypi/linux/issues/6817 [2] Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Link: https://lore.kernel.org/r/20250430210643.57924-1-mcanal@igalia.com Signed-off-by: Maíra Canal <mcanal@igalia.com>
generated by cgit (git 2.34.1) at 2025-09-29 06:15:26 +0000