summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-10-30Merge tag 'icc-5.10-rc2' of ↵Greg Kroah-Hartman
https://git.linaro.org/people/georgi.djakov/linux into char-misc-linus Georgi writes: interconnect fixes for v5.10 This contains one core fix and a few driver fixes. - Fix the core to perform also aggregation when setting the initial bandwidth with sync_state. - Fixes in some drivers to make sure the correct sequence is used for initialization when we use sync_state. - Fix in the sdm845 driver to prevent a board hang that was hit when bandwidth scaling for display and multimedia was enabled. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> * tag 'icc-5.10-rc2' of https://git.linaro.org/people/georgi.djakov/linux: interconnect: qcom: use icc_sync state for sm8[12]50 interconnect: qcom: Ensure that the floor bandwidth value is enforced interconnect: qcom: sc7180: Init BCMs before creating the nodes interconnect: qcom: sdm845: Init BCMs before creating the nodes interconnect: Aggregate before setting initial bandwidth interconnect: qcom: sdm845: Enable keepalive for the MM1 BCM
2020-10-30Merge tag 'usb-v5.10-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus Peter writes: 4 bug fixes for Cadence 3 driver. The biggest fix is changing endpoint configuration method to avoid FIFO overflow at multiple endpoints situation. * tag 'usb-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: cdns3: gadget: own the lock wrongly at the suspend routine usb: cdns3: Fix on-chip memory overflow issue usb: cdns3: gadget: suspicious implicit sign extension usb: cdns3: Variable 'length' set but not used
2020-10-30vdpasim: allow to assign a MAC addressLaurent Vivier
Add macaddr parameter to the module to set the MAC address to use Signed-off-by: Laurent Vivier <lvivier@redhat.com> Link: https://lore.kernel.org/r/20201029122050.776445-3-lvivier@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2020-10-30vdpasim: fix MAC address configurationLaurent Vivier
vdpa_sim generates a ramdom MAC address but it is never used by upper layers because the VIRTIO_NET_F_MAC bit is not set in the features list. Because of that, virtio-net always regenerates a random MAC address each time it is loaded whereas the address should only change on vdpa_sim load/unload. Fix that by adding VIRTIO_NET_F_MAC in the features list of vdpa_sim. Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator") Cc: jasowang@redhat.com Signed-off-by: Laurent Vivier <lvivier@redhat.com> Link: https://lore.kernel.org/r/20201029122050.776445-2-lvivier@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2020-10-30vdpa: handle irq bypass register failure caseZhu Lingshan
LKP considered variable 'ret' in vhost_vdpa_setup_vq_irq() as a unused variable, so suggest we remove it. Actually it stores return value of irq_bypass_register_producer(), but we did not check it, we should handle the failure case. This commit will print a message if irq bypass register producer fail, in this case, vqs still remain functional. Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20201023104046.404794-1-lingshan.zhu@intel.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2020-10-30vdpa_sim: Fix DMA maskLaurent Vivier
Since commit f959dcd6ddfd ("dma-direct: Fix potential NULL pointer dereference") an error is reported when we load vdpa_sim and virtio-vdpa: [ 129.351207] net eth0: Unexpected TXQ (0) queue failure: -12 It seems that dma_mask is not initialized. This patch initializes dma_mask() and calls dma_set_mask_and_coherent() to fix the problem. Full log: [ 128.548628] ------------[ cut here ]------------ [ 128.553268] WARNING: CPU: 23 PID: 1105 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x14c/0x1d0 [ 128.562139] Modules linked in: virtio_net net_failover failover virtio_vdpa vdpa_sim vringh vhost_iotlb vdpa xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun bridge stp llc iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi rfkill intel_rapl_msr intel_rapl_common isst_if_common sunrpc skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ipmi_ssif kvm mgag200 i2c_algo_bit irqbypass drm_kms_helper crct10dif_pclmul crc32_pclmul syscopyarea ghash_clmulni_intel iTCO_wdt sysfillrect iTCO_vendor_support sysimgblt rapl fb_sys_fops dcdbas intel_cstate drm acpi_ipmi ipmi_si mei_me dell_smbios intel_uncore ipmi_devintf mei i2c_i801 dell_wmi_descriptor wmi_bmof pcspkr lpc_ich i2c_smbus ipmi_msghandler acpi_power_meter ip_tables xfs libcrc32c sd_mod t10_pi sg ahci libahci libata megaraid_sas tg3 crc32c_intel wmi dm_mirror dm_region_hash dm_log [ 128.562188] dm_mod [ 128.651334] CPU: 23 PID: 1105 Comm: NetworkManager Tainted: G S I 5.10.0-rc1+ #59 [ 128.659939] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.8.1 06/30/2020 [ 128.667419] RIP: 0010:dma_map_page_attrs+0x14c/0x1d0 [ 128.672384] Code: 1c 25 28 00 00 00 0f 85 97 00 00 00 48 83 c4 10 5b 5d 41 5c 41 5d c3 4c 89 da eb d7 48 89 f2 48 2b 50 18 48 89 d0 eb 8d 0f 0b <0f> 0b 48 c7 c0 ff ff ff ff eb c3 48 89 d9 48 8b 40 40 e8 2d a0 aa [ 128.691131] RSP: 0018:ffffae0f0151f3c8 EFLAGS: 00010246 [ 128.696357] RAX: ffffffffc06b7400 RBX: 00000000000005fa RCX: 0000000000000000 [ 128.703488] RDX: 0000000000000040 RSI: ffffcee3c7861200 RDI: ffff9e2bc16cd000 [ 128.710620] RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000 [ 128.717754] R10: 0000000000000002 R11: 0000000000000000 R12: ffff9e472cb291f8 [ 128.724886] R13: ffff9e2bc14da780 R14: ffff9e472bc20000 R15: ffff9e2bc1b14940 [ 128.732020] FS: 00007f887bae23c0(0000) GS:ffff9e4ac01c0000(0000) knlGS:0000000000000000 [ 128.740105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 128.745852] CR2: 0000562bc09de998 CR3: 00000003c156c006 CR4: 00000000007706e0 [ 128.752982] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 128.760114] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 128.767247] PKRU: 55555554 [ 128.769961] Call Trace: [ 128.772418] virtqueue_add+0x81e/0xb00 [ 128.776176] virtqueue_add_inbuf_ctx+0x26/0x30 [ 128.780625] try_fill_recv+0x3a2/0x6e0 [virtio_net] [ 128.785509] virtnet_open+0xf9/0x180 [virtio_net] [ 128.790217] __dev_open+0xe8/0x180 [ 128.793620] __dev_change_flags+0x1a7/0x210 [ 128.797808] dev_change_flags+0x21/0x60 [ 128.801646] do_setlink+0x328/0x10e0 [ 128.805227] ? __nla_validate_parse+0x121/0x180 [ 128.809757] ? __nla_parse+0x21/0x30 [ 128.813338] ? inet6_validate_link_af+0x5c/0xf0 [ 128.817871] ? cpumask_next+0x17/0x20 [ 128.821535] ? __snmp6_fill_stats64.isra.54+0x6b/0x110 [ 128.826676] ? __nla_validate_parse+0x47/0x180 [ 128.831120] __rtnl_newlink+0x541/0x8e0 [ 128.834962] ? __nla_reserve+0x38/0x50 [ 128.838713] ? security_sock_rcv_skb+0x2a/0x40 [ 128.843158] ? netlink_deliver_tap+0x2c/0x1e0 [ 128.847518] ? netlink_attachskb+0x1d8/0x220 [ 128.851793] ? skb_queue_tail+0x1b/0x50 [ 128.855641] ? fib6_clean_node+0x43/0x170 [ 128.859652] ? _cond_resched+0x15/0x30 [ 128.863406] ? kmem_cache_alloc_trace+0x3a3/0x420 [ 128.868110] rtnl_newlink+0x43/0x60 [ 128.871602] rtnetlink_rcv_msg+0x12c/0x380 [ 128.875701] ? rtnl_calcit.isra.39+0x110/0x110 [ 128.880147] netlink_rcv_skb+0x50/0x100 [ 128.883987] netlink_unicast+0x1a5/0x280 [ 128.887913] netlink_sendmsg+0x23d/0x470 [ 128.891839] sock_sendmsg+0x5b/0x60 [ 128.895331] ____sys_sendmsg+0x1ef/0x260 [ 128.899255] ? copy_msghdr_from_user+0x5c/0x90 [ 128.903702] ___sys_sendmsg+0x7c/0xc0 [ 128.907369] ? dev_forward_change+0x130/0x130 [ 128.911731] ? sysctl_head_finish.part.29+0x24/0x40 [ 128.916616] ? new_sync_write+0x11f/0x1b0 [ 128.920628] ? mntput_no_expire+0x47/0x240 [ 128.924727] __sys_sendmsg+0x57/0xa0 [ 128.928309] do_syscall_64+0x33/0x40 [ 128.931887] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 128.936937] RIP: 0033:0x7f88792e3857 [ 128.940518] Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 0b ed ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 44 ed ff ff 48 [ 128.959263] RSP: 002b:00007ffdca60dea0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 128.966827] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f88792e3857 [ 128.973960] RDX: 0000000000000000 RSI: 00007ffdca60def0 RDI: 000000000000000c [ 128.981095] RBP: 00007ffdca60def0 R08: 0000000000000000 R09: 0000000000000000 [ 128.988224] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000000000000 [ 128.995357] R13: 0000000000000000 R14: 00007ffdca60e0a8 R15: 00007ffdca60e09c [ 129.002492] CPU: 23 PID: 1105 Comm: NetworkManager Tainted: G S I 5.10.0-rc1+ #59 [ 129.011093] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.8.1 06/30/2020 [ 129.018571] Call Trace: [ 129.021027] dump_stack+0x57/0x6a [ 129.024346] __warn.cold.14+0xe/0x3d [ 129.027925] ? dma_map_page_attrs+0x14c/0x1d0 [ 129.032283] report_bug+0xbd/0xf0 [ 129.035602] handle_bug+0x44/0x80 [ 129.038922] exc_invalid_op+0x13/0x60 [ 129.042589] asm_exc_invalid_op+0x12/0x20 [ 129.046602] RIP: 0010:dma_map_page_attrs+0x14c/0x1d0 [ 129.051566] Code: 1c 25 28 00 00 00 0f 85 97 00 00 00 48 83 c4 10 5b 5d 41 5c 41 5d c3 4c 89 da eb d7 48 89 f2 48 2b 50 18 48 89 d0 eb 8d 0f 0b <0f> 0b 48 c7 c0 ff ff ff ff eb c3 48 89 d9 48 8b 40 40 e8 2d a0 aa [ 129.070311] RSP: 0018:ffffae0f0151f3c8 EFLAGS: 00010246 [ 129.075536] RAX: ffffffffc06b7400 RBX: 00000000000005fa RCX: 0000000000000000 [ 129.082669] RDX: 0000000000000040 RSI: ffffcee3c7861200 RDI: ffff9e2bc16cd000 [ 129.089803] RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000 [ 129.096936] R10: 0000000000000002 R11: 0000000000000000 R12: ffff9e472cb291f8 [ 129.104068] R13: ffff9e2bc14da780 R14: ffff9e472bc20000 R15: ffff9e2bc1b14940 [ 129.111200] virtqueue_add+0x81e/0xb00 [ 129.114952] virtqueue_add_inbuf_ctx+0x26/0x30 [ 129.119399] try_fill_recv+0x3a2/0x6e0 [virtio_net] [ 129.124280] virtnet_open+0xf9/0x180 [virtio_net] [ 129.128984] __dev_open+0xe8/0x180 [ 129.132390] __dev_change_flags+0x1a7/0x210 [ 129.136575] dev_change_flags+0x21/0x60 [ 129.140415] do_setlink+0x328/0x10e0 [ 129.143994] ? __nla_validate_parse+0x121/0x180 [ 129.148528] ? __nla_parse+0x21/0x30 [ 129.152107] ? inet6_validate_link_af+0x5c/0xf0 [ 129.156639] ? cpumask_next+0x17/0x20 [ 129.160306] ? __snmp6_fill_stats64.isra.54+0x6b/0x110 [ 129.165443] ? __nla_validate_parse+0x47/0x180 [ 129.169890] __rtnl_newlink+0x541/0x8e0 [ 129.173731] ? __nla_reserve+0x38/0x50 [ 129.177483] ? security_sock_rcv_skb+0x2a/0x40 [ 129.181928] ? netlink_deliver_tap+0x2c/0x1e0 [ 129.186286] ? netlink_attachskb+0x1d8/0x220 [ 129.190560] ? skb_queue_tail+0x1b/0x50 [ 129.194401] ? fib6_clean_node+0x43/0x170 [ 129.198411] ? _cond_resched+0x15/0x30 [ 129.202163] ? kmem_cache_alloc_trace+0x3a3/0x420 [ 129.206869] rtnl_newlink+0x43/0x60 [ 129.210361] rtnetlink_rcv_msg+0x12c/0x380 [ 129.214462] ? rtnl_calcit.isra.39+0x110/0x110 [ 129.218908] netlink_rcv_skb+0x50/0x100 [ 129.222747] netlink_unicast+0x1a5/0x280 [ 129.226672] netlink_sendmsg+0x23d/0x470 [ 129.230599] sock_sendmsg+0x5b/0x60 [ 129.234090] ____sys_sendmsg+0x1ef/0x260 [ 129.238015] ? copy_msghdr_from_user+0x5c/0x90 [ 129.242461] ___sys_sendmsg+0x7c/0xc0 [ 129.246128] ? dev_forward_change+0x130/0x130 [ 129.250487] ? sysctl_head_finish.part.29+0x24/0x40 [ 129.255368] ? new_sync_write+0x11f/0x1b0 [ 129.259381] ? mntput_no_expire+0x47/0x240 [ 129.263478] __sys_sendmsg+0x57/0xa0 [ 129.267058] do_syscall_64+0x33/0x40 [ 129.270639] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 129.275689] RIP: 0033:0x7f88792e3857 [ 129.279268] Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 0b ed ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 44 ed ff ff 48 [ 129.298015] RSP: 002b:00007ffdca60dea0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 129.305581] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f88792e3857 [ 129.312712] RDX: 0000000000000000 RSI: 00007ffdca60def0 RDI: 000000000000000c [ 129.319846] RBP: 00007ffdca60def0 R08: 0000000000000000 R09: 0000000000000000 [ 129.326978] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000000000000 [ 129.334109] R13: 0000000000000000 R14: 00007ffdca60e0a8 R15: 00007ffdca60e09c [ 129.341249] ---[ end trace c551e8028fbaf59d ]--- [ 129.351207] net eth0: Unexpected TXQ (0) queue failure: -12 [ 129.360445] net eth0: Unexpected TXQ (0) queue failure: -12 [ 129.824428] net eth0: Unexpected TXQ (0) queue failure: -12 Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator") Signed-off-by: Laurent Vivier <lvivier@redhat.com> Link: https://lore.kernel.org/r/20201027175914.689278-1-lvivier@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: stable@vger.kernel.org Acked-by: Jason Wang <jasowang@redhat.com>
2020-10-30Revert "vhost-vdpa: fix page pinning leakage in error path"Michael S. Tsirkin
This reverts commit 7ed9e3d97c32d969caded2dfb6e67c1a2cc5a0b1. The patch creates a DoS risk since it can result in a high order memory allocation. Fixes: 7ed9e3d97c32d ("vhost-vdpa: fix page pinning leakage in error path") Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-30vdpa/mlx5: Fix error return in map_direct_mr()Jing Xiangfeng
Fix to return the variable "err" from the error handling case instead of "ret". Fixes: 94abbccdf291 ("vdpa/mlx5: Add shared memory registration code") Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Link: https://lore.kernel.org/r/20201026070637.164321-1-jingxiangfeng@huawei.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Eli Cohen <elic@nvidia.com> Cc: stable@vger.kernel.org Acked-by: Jason Wang <jasowang@redhat.com>
2020-10-30vhost_vdpa: Return -EFAULT if copy_from_user() failsDan Carpenter
The copy_to/from_user() functions return the number of bytes which we weren't able to copy but the ioctl should return -EFAULT if they fail. Fixes: a127c5bbb6a8 ("vhost-vdpa: fix backend feature ioctls") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201023120853.GI282278@mwanda Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: stable@vger.kernel.org Acked-by: Jason Wang <jasowang@redhat.com>
2020-10-30usb: cdns3: gadget: own the lock wrongly at the suspend routinePeter Chen
When the system goes to suspend, if the controller is at device mode with cable connecting to host, the call stack is: cdns3_suspend-> cdns3_gadget_suspend -> cdns3_disconnect_gadget, after cdns3_disconnect_gadget is called, it owns lock wrongly, it causes the system being deadlock after resume due to at cdns3_device_thread_irq_handler, it tries to get the lock, but can't get it forever. To fix it, we delete the unlock-lock operations at cdns3_disconnect_gadget, and do it at the caller. Fixes: b1234e3b3b26 ("usb: cdns3: add runtime PM support") Acked-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-10-30usb: cdns3: Fix on-chip memory overflow issuePawel Laszczak
Patch fixes issue caused setting On-chip memory overflow bit in usb_sts register. The issue occurred because EP_CFG register was set twice before USB_STS.CFGSTS was set. Every write operation on EP_CFG.BUFFERING causes that controller increases internal counter holding the number of reserved on-chip buffers. First time this register was updated in function cdns3_ep_config before delegating SET_CONFIGURATION request to class driver and again it was updated when class wanted to enable endpoint. This patch fixes this issue by configuring endpoints enabled by class driver in cdns3_gadget_ep_enable and others just before status stage. Cc: stable@vger.kernel.org#v5.8+ Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Reported-and-tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-10-30Merge tag 'drm-intel-fixes-2020-10-29' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix max memory region size calculation (Matt) - Restore ILK-M RPS support, restoring performance (Ville) - Reject 90/270 degreerotated initial fbs (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201030004442.GA146813@intel.com
2020-10-30Merge branch 'linux-5.10' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
Fixes an endian regression on older GPUs, a refcount overflow, a migration fix and 3 display fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv6MOjtgzKchpis1XrZYmu7-6CaxnHVzJKOXPH62_em7tw@mail.gmail.com
2020-10-30Merge tag 'drm-misc-fixes-2020-10-29' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes First round of drm-misc-fixes with a couple of leftovers from drm-misc-fixes next. Some reset fixes for the mantix panel, some fixes for a scaler issue on sun4i, many kernel-doc fixes and various fixes for vc4 (mostly HDMI audio related) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201029173414.fxrl5jacsdwqheto@gilmour.lan
2020-10-30drm/nouveau/kms/nv50-: Fix clock checking algorithm in nv50_dp_mode_valid()Lyude Paul
While I thought I had this correct (since it actually did reject modes like I expected during testing), Ville Syrjala from Intel pointed out that the logic here isn't correct. max_clock refers to the max data rate supported by the DP encoder. So, limiting it to the output of ds_clock (which refers to the maximum dotclock of the downstream DP device) doesn't make any sense. Additionally, since we're using the connector's bpc as the canonical BPC we should use this in mode_valid until we support dynamically setting the bpp based on bandwidth constraints. https://lists.freedesktop.org/archives/dri-devel/2020-September/280276.html For more info. So, let's rewrite this using Ville's advice. v2: * Ville pointed out I mixed up the dotclock and the link rate. So fix that... * ...and also rename all the variables in this function to be more appropriately labeled so I stop mixing them up. * Reuse the bpp from the connector for now until we have dynamic bpp selection. * Use use DIV_ROUND_UP for calculating the mode rate like i915 does, which we should also have been doing from the start Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 409d38139b42 ("drm/nouveau/kms/nv50-: Use downstream DP clock limits for mode validation") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-10-30drm/nouveau/kms/nv50-: Get rid of bogus nouveau_conn_mode_valid()Lyude Paul
Ville also pointed out that I got a lot of the logic here wrong as well, whoops. While I don't think anyone's likely using 3D output with nouveau, the next patch will make nouveau_conn_mode_valid() make a lot less sense. So, let's just get rid of it and open-code it like before, while taking care to move the 3D frame packing calculations on the dot clock into the right place. Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: d6a9efece724 ("drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.8+ Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-10-30drm/nouveau/device: fix changing endianess code to work on older GPUsKarol Herbst
With this we try to detect if the endianess switch works and assume LE if not. Suggested by Ben. Fixes: 51c05340e407 ("drm/nouveau/device: detect if changing endianness failed") Signed-off-by: Karol Herbst <kherbst@redhat.com> Cc: <stable@vger.kernel.org> # v5.8+ Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-10-30drm/nouveau/gem: fix "refcount_t: underflow; use-after-free"Karol Herbst
we can't use nouveau_bo_ref here as no ttm object was allocated and nouveau_bo_ref mainly deals with that. Simply deallocate the object. Signed-off-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-10-30drm/nouveau/kms/nv50-: Program notifier offset before requesting disp capsLyude Paul
Not entirely sure why this never came up when I originally tested this (maybe some BIOSes already have this setup?) but the ->caps_init vfunc appears to cause the display engine to throw an exception on driver init, at least on my ThinkPad P72: nouveau 0000:01:00.0: disp: chid 0 mthd 008c data 00000000 0000508c 0000102b This is magic nvidia speak for "You need to have the DMA notifier offset programmed before you can call NV507D_GET_CAPABILITIES." So, let's fix this by doing that, and also perform an update afterwards to prevent racing with the GPU when reading capabilities. v2: * Don't just program the DMA notifier offset, make sure to actually perform an update v3: * Don't call UPDATE() * Actually read the correct notifier fields, as apparently the CAPABILITIES_DONE field lives in a different location than the main NV_DISP_CORE_NOTIFIER_1 field. As well, 907d+ use a different CAPABILITIES_DONE field then pre-907d cards. v4: * Don't forget to check the return value of core507d_read_caps() v5: * Get rid of NV50_DISP_CAPS_NTFY[14], use NV50_DISP_CORE_NTFY * Disable notifier after calling GetCapabilities() Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 4a2cb4181b07 ("drm/nouveau/kms/nv50-: Probe SOR and PIOR caps for DP interlacing support") Cc: <stable@vger.kernel.org> # v5.8+ Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-10-30drm/nouveau/nouveau: fix the start/end range for migrationRalph Campbell
The user level OpenCL code shouldn't have to align start and end addresses to a page boundary. That is better handled in the nouveau driver. The npages field is also redundant since it can be computed from the start and end addresses. Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-10-29scsi: target: tcmu: Replace zero-length array with flexible-array memberGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-10-29enetc: Replace zero-length array with flexible-array memberGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-10-29soc: ti: ti_sci_pm_domains: check for proper args count in xlateTero Kristo
K2G devices still only use single parameter for power-domains property, so check for this properly in the driver. Without this, every peripheral fails to probe resulting in boot failure. Link: https://lore.kernel.org/r/20201029093337.21170-1-t-kristo@ti.com Fixes: efa5c01cd7ee ("soc: ti: ti_sci_pm_domains: switch to use multiple genpds instead of one") Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-29Merge tag 'net-5.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release regressions: - r8169: fix forced threading conflicting with other shared interrupts; we tried to fix the use of raise_softirq_irqoff from an IRQ handler on RT by forcing hard irqs, but this driver shares legacy PCI IRQs so drop the _irqoff() instead - tipc: fix memory leak caused by a recent syzbot report fix to tipc_buf_append() Current release - bugs in new features: - devlink: Unlock on error in dumpit() and fix some error codes - net/smc: fix null pointer dereference in smc_listen_decline() Previous release - regressions: - tcp: Prevent low rmem stalls with SO_RCVLOWAT. - net: protect tcf_block_unbind with block lock - ibmveth: Fix use of ibmveth in a bridge; the self-imposed filtering to only send legal frames to the hypervisor was too strict - net: hns3: Clear the CMDQ registers before unmapping BAR region; incorrect cleanup order was leading to a crash - bnxt_en - handful of fixes to fixes: - Send HWRM_FUNC_RESET fw command unconditionally, even if there are PCIe errors being reported - Check abort error state in bnxt_open_nic(). - Invoke cancel_delayed_work_sync() for PFs also. - Fix regression in workqueue cleanup logic in bnxt_remove_one(). - mlxsw: Only advertise link modes supported by both driver and device, after removal of 56G support from the driver 56G was not cleared from advertised modes - net/smc: fix suppressed return code Previous release - always broken: - netem: fix zero division in tabledist, caused by integer overflow - bnxt_en: Re-write PCI BARs after PCI fatal error. - cxgb4: set up filter action after rewrites - net: ipa: command payloads already mapped Misc: - s390/ism: fix incorrect system EID, it's okay to change since it was added in current release - vsock: use ns_capable_noaudit() on socket create to suppress false positive audit messages" * tag 'net-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits) r8169: fix issue with forced threading in combination with shared interrupts netem: fix zero division in tabledist ibmvnic: fix ibmvnic_set_mac mptcp: add missing memory scheduling in the rx path tipc: fix memory leak caused by tipc_buf_append() gtp: fix an use-before-init in gtp_newlink() net: protect tcf_block_unbind with block lock ibmveth: Fix use of ibmveth in a bridge. net/sched: act_mpls: Add softdep on mpls_gso.ko ravb: Fix bit fields checking in ravb_hwtstamp_get() devlink: Unlock on error in dumpit() devlink: Fix some error codes chelsio/chtls: fix memory leaks in CPL handlers chelsio/chtls: fix deadlock issue net: hns3: Clear the CMDQ registers before unmapping BAR region bnxt_en: Send HWRM_FUNC_RESET fw command unconditionally. bnxt_en: Check abort error state in bnxt_open_nic(). bnxt_en: Re-write PCI BARs after PCI fatal error. bnxt_en: Invoke cancel_delayed_work_sync() for PFs also. bnxt_en: Fix regression in workqueue cleanup logic in bnxt_remove_one(). ...
2020-10-29coresight: cti: Initialize dynamic sysfs attributesSuzuki K Poulose
With LOCKDEP enabled, CTI driver triggers the following splat due to uninitialized lock class for dynamically allocated attribute objects. [ 5.372901] coresight etm0: CPU0: ETM v4.0 initialized [ 5.376694] coresight etm1: CPU1: ETM v4.0 initialized [ 5.380785] coresight etm2: CPU2: ETM v4.0 initialized [ 5.385851] coresight etm3: CPU3: ETM v4.0 initialized [ 5.389808] BUG: key ffff00000564a798 has not been registered! [ 5.392456] ------------[ cut here ]------------ [ 5.398195] DEBUG_LOCKS_WARN_ON(1) [ 5.398233] WARNING: CPU: 1 PID: 32 at kernel/locking/lockdep.c:4623 lockdep_init_map_waits+0x14c/0x260 [ 5.406149] Modules linked in: [ 5.415411] CPU: 1 PID: 32 Comm: kworker/1:1 Not tainted 5.9.0-12034-gbbe85027ce80 #51 [ 5.418553] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 5.426453] Workqueue: events amba_deferred_retry_func [ 5.433299] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 5.438252] pc : lockdep_init_map_waits+0x14c/0x260 [ 5.444410] lr : lockdep_init_map_waits+0x14c/0x260 [ 5.449007] sp : ffff800012bbb720 ... [ 5.531561] Call trace: [ 5.536847] lockdep_init_map_waits+0x14c/0x260 [ 5.539027] __kernfs_create_file+0xa8/0x1c8 [ 5.543539] sysfs_add_file_mode_ns+0xd0/0x208 [ 5.548054] internal_create_group+0x118/0x3c8 [ 5.552307] internal_create_groups+0x58/0xb8 [ 5.556733] sysfs_create_groups+0x2c/0x38 [ 5.561160] device_add+0x2d8/0x768 [ 5.565148] device_register+0x28/0x38 [ 5.568537] coresight_register+0xf8/0x320 [ 5.572358] cti_probe+0x1b0/0x3f0 ... Fix this by initializing the attributes when they are allocated. Fixes: 3c5597e39812 ("coresight: cti: Add connection information to sysfs") Reported-by: Leo Yan <leo.yan@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20201029164559.1268531-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29coresight: Fix uninitialised pointer bug in etm_setup_aux()Mike Leach
Commit [bb1860efc817] changed the sink handling code introducing an uninitialised pointer bug. This results in the default sink selection failing. Prior to commit: static void etm_setup_aux(...) <snip> struct coresight_device *sink; <snip> /* First get the selected sink from user space. */ if (event->attr.config2) { id = (u32)event->attr.config2; sink = coresight_get_sink_by_id(id); } else { sink = coresight_get_enabled_sink(true); } <ctd> *sink always initialised - possibly to NULL which triggers the automatic sink selection. After commit: static void etm_setup_aux(...) <snip> struct coresight_device *sink; <snip> /* First get the selected sink from user space. */ if (event->attr.config2) { id = (u32)event->attr.config2; sink = coresight_get_sink_by_id(id); } <ctd> *sink pointer uninitialised when not providing a sink on the perf command line. This breaks later checks to enable automatic sink selection. Fixes: bb1860efc817 ("coresight: etm: perf: Sink selection using sysfs is deprecated") Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20201029164559.1268531-3-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "The good news is people are testing rc1 in the RDMA world - the bad news is testing of the for-next area is not as good as I had hoped, as we really should have caught at least the rdma_connect_locked() issue before now. Notable merge window regressions that didn't get caught/fixed in time for rc1: - Fix in kernel users of rxe, they were broken by the rapid fix to undo the uABI breakage in rxe from another patch - EFA userspace needs to read the GID table but was broken with the new GID table logic - Fix user triggerable deadlock in mlx5 using devlink reload - Fix deadlock in several ULPs using rdma_connect from the CM handler callbacks - Memory leak in qedr" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/qedr: Fix memory leak in iWARP CM RDMA: Add rdma_connect_locked() RDMA/uverbs: Fix false error in query gid IOCTL RDMA/mlx5: Fix devlink deadlock on net namespace deletion RDMA/rxe: Fix small problem in network_type patch
2020-10-29r8169: fix issue with forced threading in combination with shared interruptsHeiner Kallweit
As reported by Serge flag IRQF_NO_THREAD causes an error if the interrupt is actually shared and the other driver(s) don't have this flag set. This situation can occur if a PCI(e) legacy interrupt is used in combination with forced threading. There's no good way to deal with this properly, therefore we have to remove flag IRQF_NO_THREAD. For fixing the original forced threading issue switch to napi_schedule(). Fixes: 424a646e072a ("r8169: fix operation under forced interrupt threading") Link: https://www.spinics.net/lists/netdev/msg694960.html Reported-by: Serge Belyshev <belyshev@depni.sinp.msu.ru> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Serge Belyshev <belyshev@depni.sinp.msu.ru> Link: https://lore.kernel.org/r/b5b53bfe-35ac-3768-85bf-74d1290cf394@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-29ibmvnic: fix ibmvnic_set_macLijun Pan
Jakub Kicinski brought up a concern in ibmvnic_set_mac(). ibmvnic_set_mac() does this: ether_addr_copy(adapter->mac_addr, addr->sa_data); if (adapter->state != VNIC_PROBED) rc = __ibmvnic_set_mac(netdev, addr->sa_data); So if state == VNIC_PROBED, the user can assign an invalid address to adapter->mac_addr, and ibmvnic_set_mac() will still return 0. The fix is to validate ethernet address at the beginning of ibmvnic_set_mac(), and move the ether_addr_copy to the case of "adapter->state != VNIC_PROBED". Fixes: c26eba03e407 ("ibmvnic: Update reset infrastructure to support tunable parameters") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20201027220456.71450-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-29drm/i915: Reject 90/270 degree rotated initial fbsVille Syrjälä
We don't currently handle the initial fb readout correctly for 90/270 degree rotated scanout. Reject it. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201020194330.28568-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit a40a8305a732f4ecc2186ac7ca132ba062ed770d) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-10-29drm/i915: Restore ILK-M RPS supportVille Syrjälä
Restore RPS for ILK-M. We lost it when an extra HAS_RPS() check appeared in intel_rps_enable(). Unfortunaltey this just makes the performance worse on my ILK because intel_ips insists on limiting the GPU freq to the minimum. If we don't do the RPS init then intel_ips will not limit the frequency for whatever reason. Either it can't get at some required information and thus makes wrong decisions, or we mess up some weights/etc. and cause it to make the wrong decisions when RPS init has been done, or the entire thing is just wrong. Would require a bunch of reverse engineering to figure out what's going on. Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 9c878557b1eb ("drm/i915/gt: Use the RPM config register to determine clk frequencies") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201021131443.25616-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 2bf06370bcfb0dea5655e9a5ad460c7f7dca7739) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-10-29drm/i915/region: fix max size calculationMatthew Auld
We are incorrectly limiting the max allocation size as per the mm max_order, which is effectively the largest power-of-two that we can fit in the region size. However, it's normal to setup the region or allocator with a non-power-of-two size(for example 3G), which we should already handle correctly, except it seems for the early too-big-check. v2: make sure we also exercise the I915_BO_ALLOC_CONTIGUOUS path, which is quite different, since for that we are actually limited by the largest power-of-two that we can fit within the region size. (Chris) Fixes: b908be543e44 ("drm/i915: support creating LMEM objects") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: CQ Tang <cq.tang@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201021103606.241395-1-matthew.auld@intel.com (cherry picked from commit 83ebef47f8ebe320d5c5673db82f9903a4f40a69) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-10-29gtp: fix an use-before-init in gtp_newlink()Masahiro Fujiwara
*_pdp_find() from gtp_encap_recv() would trigger a crash when a peer sends GTP packets while creating new GTP device. RIP: 0010:gtp1_pdp_find.isra.0+0x68/0x90 [gtp] <SNIP> Call Trace: <IRQ> gtp_encap_recv+0xc2/0x2e0 [gtp] ? gtp1_pdp_find.isra.0+0x90/0x90 [gtp] udp_queue_rcv_one_skb+0x1fe/0x530 udp_queue_rcv_skb+0x40/0x1b0 udp_unicast_rcv_skb.isra.0+0x78/0x90 __udp4_lib_rcv+0x5af/0xc70 udp_rcv+0x1a/0x20 ip_protocol_deliver_rcu+0xc5/0x1b0 ip_local_deliver_finish+0x48/0x50 ip_local_deliver+0xe5/0xf0 ? ip_protocol_deliver_rcu+0x1b0/0x1b0 gtp_encap_enable() should be called after gtp_hastable_new() otherwise *_pdp_find() will access the uninitialized hash table. Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional") Signed-off-by: Masahiro Fujiwara <fujiwara.masahiro@gmail.com> Link: https://lore.kernel.org/r/20201027114846.3924-1-fujiwara.masahiro@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-29dma-mapping: fix 32-bit overflow with CONFIG_ARM_LPAE=nGeert Uytterhoeven
On r8a7791/koelsch and shmobile_defconfig, PCIe probing fails with: rcar-pcie fe000000.pcie: Adjusted size 0x0 invalid rcar-pcie: probe of fe000000.pcie failed with error -22 of_dma_get_range() returns the following map: cpu_start 0x40000000 dma_start 0x40000000 size 0x080000000 offset 0 cpu_start 0x00000000 dma_start 0x00000000 size 0x100000000 offset 0 If CONFIG_ARM_LPAE=n, dma_addr_t is 32-bit. Hence when assigning r->dma_start + r->size to dma_end, this value will be truncated to 32-bit, yielding zero when processing the second table entry. Consequently, both dma_start and dma_end will be zero, leading to a zero size. Fix this by changing the dma_start and dma_end variables from dma_addr_t to u64. Fixes: e0d072782c734d27 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-29Merge tag 'nvme-5.10-2020-10-29' of git://git.infradead.org/nvme into block-5.10Jens Axboe
Pull NVMe fixes from Christoph: "nvme updates for 5.10: - improve zone revalidation (Keith Busch) - gracefully handle zero length messages in nvme-rdma (zhenwei pi) - nvme-fc error handling fixes (James Smart) - nvmet tracing NULL pointer dereference fix (Chaitanya Kulkarni)" * tag 'nvme-5.10-2020-10-29' of git://git.infradead.org/nvme: nvmet: fix a NULL pointer dereference when tracing the flush command nvme-fc: remove nvme_fc_terminate_io() nvme-fc: eliminate terminate_io use by nvme_fc_error_recovery nvme-fc: remove err_work work item nvme-fc: track error_recovery while connecting nvme-rdma: handle unexpected nvme completion data length nvme: ignore zone validate errors on subsequent scans
2020-10-29xsysace: use platform_get_resource() and platform_get_irq_optional()Andy Shevchenko
Use platform_get_resource() to fetch the memory resource and platform_get_irq_optional() to get optional IRQ instead of open-coded variants. IRQ is not supposed to be changed at runtime, so there is no functional change in ace_fsm_yieldirq(). On the other hand we now take first resources instead of last ones to proceed. I can't imagine how broken should be firmware to have a garbage in the first resource slots. But if it the case, it needs to be documented. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-29null_blk: Fix locking in zoned modeDamien Le Moal
When the zoned mode is enabled in null_blk, Serializing read, write and zone management operations for each zone is necessary to protect device level information for managing zone resources (zone open and closed counters) as well as each zone condition and write pointer position. Commit 35bc10b2eafb ("null_blk: synchronization fix for zoned device") introduced a spinlock to implement this serialization. However, when memory backing is also enabled, GFP_NOIO memory allocations are executed under the spinlock, resulting in might_sleep() warnings. Furthermore, the zone_lock spinlock is locked/unlocked using spin_lock_irq/spin_unlock_irq, similarly to the memory backing code with the nullb->lock spinlock. This nested use of irq locks wrecks the irq enabled/disabled state. Fix all this by introducing a bitmap for per-zone lock, with locking implemented using wait_on_bit_lock_io() and clear_and_wake_up_bit(). This locking mechanism allows keeping a zone locked while executing null_process_cmd(), serializing all operations to the zone while allowing to sleep during memory backing allocation with GFP_NOIO. Device level zone resource management information is protected using a spinlock which is not held while executing null_process_cmd(); Fixes: 35bc10b2eafb ("null_blk: synchronization fix for zoned device") Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-29null_blk: Fix zone reset all tracingDamien Le Moal
In the cae of the REQ_OP_ZONE_RESET_ALL operation, the command sector is ignored and the operation is applied to all sequential zones. For these commands, tracing the effect of the command using the command sector to determine the target zone is thus incorrect. Fix null_zone_mgmt() zone condition tracing in the case of REQ_OP_ZONE_RESET_ALL to apply tracing to all sequential zones that are not already empty. Fixes: 766c3297d7e1 ("null_blk: add trace in null_blk_zoned.c") Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-29nbd: don't update block size after device is startedMing Lei
Mounted NBD device can be resized, one use case is rbd-nbd. Fix the issue by setting up default block size, then not touch it in nbd_size_update() any more. This kind of usage is aligned with loop which has same use case too. Cc: stable@vger.kernel.org Fixes: c8a83a6b54d0 ("nbd: Use set_blocksize() to set device blocksize") Reported-by: lining <lining2020x@163.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Jan Kara <jack@suse.cz> Tested-by: lining <lining2020x@163.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-29cpufreq: Introduce cpufreq_driver_test_flags()Rafael J. Wysocki
Add a helper function to test the flags of the cpufreq driver in use againt a given flags mask. In particular, this will be needed to test the CPUFREQ_NEED_UPDATE_LIMITS cpufreq driver flag in the schedutil governor. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-29usb: cdns3: gadget: suspicious implicit sign extensionPeter Chen
The code: trb->length = cpu_to_le32(TRB_BURST_LEN(priv_ep->trb_burst_size) | TRB_LEN(length)); TRB_BURST_LEN(priv_ep->trb_burst_size) may be overflow for int 32 if priv_ep->trb_burst_size is equal or larger than 0x80; Below is the Coverity warning: sign_extension: Suspicious implicit sign extension: priv_ep->trb_burst_size with type u8 (8 bits, unsigned) is promoted in priv_ep->trb_burst_size << 24 to type int (32 bits, signed), then sign-extended to type unsigned long (64 bits, unsigned). If priv_ep->trb_burst_size << 24 is greater than 0x7FFFFFFF, the upper bits of the result will all be 1. To fix it, it needs to add an explicit cast to unsigned int type for ((p) << 24). Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-10-29drm/vc4: Rework the structure conversion functionsMaxime Ripard
Most of the helpers to retrieve vc4 structures from the DRM base structures rely on the fact that the first member of the vc4 structure is the DRM one and just cast the pointers between them. However, this is pretty fragile especially since there's no check to make sure that the DRM structure is indeed at the offset 0 in the structure, so let's use container_of to make it more robust. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201028123752.1733242-1-maxime@cerno.tech
2020-10-29drm/vc4: hdmi: Add a name to the codec DAI componentMaxime Ripard
Since the components for a given device in ASoC are identified by their name, it makes sense to add one even though it's not strictly necessary. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200708144555.718404-1-maxime@cerno.tech
2020-10-29coresight: add module licenseArnd Bergmann
When built as a loadable module, coresight now causes a warning about missing license information. WARNING: modpost: missing MODULE_LICENSE() in drivers/hwtracing/coresight/coresight.o Fixes: 8e264c52e1da ("coresight: core: Allow the coresight core driver to be built as a module") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20201026160205.3704789-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29xhci: Don't create stream debugfs files with spinlock held.Mathias Nyman
Creating debugfs files while loding the spin_lock_irqsave(xhci->lock) creates a lock dependecy that could possibly deadlock. Lockdep warns: ===================================================== WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected 5.10.0-rc1pdx86+ #8 Not tainted ----------------------------------------------------- systemd-udevd/386 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: ffffffffb1a94038 (pin_fs_lock){+.+.}-{2:2}, at: simple_pin_fs+0x22/0xa0 and this task is already holding: ffff9e7b87fbc430 (&xhci->lock){-.-.}-{2:2}, at: xhci_alloc_streams+0x5f9/0x810 which would create a new lock dependency: (&xhci->lock){-.-.}-{2:2} -> (pin_fs_lock){+.+.}-{2:2} Create the files a bit later after lock is released. Fixes: 673d74683627 ("usb: xhci: add debugfs support for ep with stream") CC: Li Jun <jun.li@nxp.com> Reported-by: Hans de Goede <hdegoede@redhat.com> Reported-by: Mike Galbraith <efault@gmx.de> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20201028203124.375344-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29usb: xhci: Workaround for S3 issue on AMD SNPS 3.0 xHCSandeep Singh
On some platform of AMD, S3 fails with HCE and SRE errors. To fix this, need to disable a bit which is enable in sparse controller. Cc: stable@vger.kernel.org #v4.19+ Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com> Signed-off-by: Sandeep Singh <sandeep.singh@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20201028203124.375344-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29xhci: Fix sizeof() mismatchColin Ian King
An incorrect sizeof() is being used, sizeof(rhub->ports) is not correct, it should be sizeof(*rhub->ports). This bug did not cause any issues because it just so happens the sizes are the same. Fixes: bcaa9d5c5900 ("xhci: Create new structures to store xhci port information") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20201028203124.375344-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29usb: typec: stusb160x: fix signedness comparison issue with enum variablesAmelie Delaunay
chip->port_type and chip->pwr_opmode are enums and when GCC considers them as unsigned, the conditions are never met. This patch takes advantage of the ret variable and fixes the following warnings: drivers/usb/typec/stusb160x.c:548 stusb160x_get_fw_caps() warn: unsigned 'chip->port_type' is never less than zero. drivers/usb/typec/stusb160x.c:570 stusb160x_get_fw_caps() warn: unsigned 'chip->pwr_opmode' is never less than zero. Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Link: https://lore.kernel.org/r/20201028163309.12878-1-amelie.delaunay@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29usb: typec: add missing MODULE_DEVICE_TABLE() to stusb160xAmelie Delaunay
When stusb160x driver is built as a module, no modalias information is available, and it prevents the module to be loaded by udev. Add MODULE_DEVICE_TABLE() to fix this issue. Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family") Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Link: https://lore.kernel.org/r/20201028151703.31195-1-amelie.delaunay@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-28misc: mic: remove the MIC driversSudeep Dutt
This patch removes the MIC drivers from the kernel tree since the corresponding devices have been discontinued. Removing the dma and char-misc changes in one patch and merging via the char-misc tree is best to avoid any potential build breakage. Cc: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Acked-By: Vinod Koul <vkoul@kernel.org> Reviewed-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/8c1443136563de34699d2c084df478181c205db4.1603854416.git.sudeep.dutt@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-11 09:49:40 +0000