summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-03-20hyperv: Log hypercall status codes as stringsNuno Das Neves
Introduce hv_status_printk() macros as a convenience to log hypercall errors, formatting them with the status code (HV_STATUS_*) as a raw hex value and also as a string, which saves some time while debugging. Create a table of HV_STATUS_ codes with strings and mapped errnos, and use it for hv_result_to_string() and hv_result_to_errno(). Use the new hv_status_printk()s in hv_proc.c, hyperv-iommu.c, and irqdomain.c hypercalls to aid debugging in the root partition. Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-2-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-2-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-20hyperv: Add CONFIG_MSHV_ROOT to gate root partition supportNuno Das Neves
CONFIG_MSHV_ROOT allows kernels built to run as a normal Hyper-V guest to exclude the root partition code, which is expected to grow significantly over time. This option is a tristate so future driver code can be built as a (m)odule, allowing faster development iteration cycles. If CONFIG_MSHV_ROOT is disabled, don't compile hv_proc.c, and stub hv_root_partition() to return false unconditionally. This allows the compiler to optimize away root partition code blocks since they will be disabled at compile time. In the case of booting as root partition *without* CONFIG_MSHV_ROOT enabled, print a critical error (the kernel will likely crash). Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/1740167795-13296-4-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1740167795-13296-4-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR (net-6.14-rc8). Conflict: tools/testing/selftests/net/Makefile 03544faad761 ("selftest: net: add proc_net_pktgen") 3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops") tools/testing/selftests/net/config: 85cb3711acb8 ("selftests: net: Add test cases for link and peer netns") 3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops") Adjacent commits: tools/testing/selftests/net/Makefile c935af429ec2 ("selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY") 355d940f4d5a ("Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-20drm/xe/eustall: Fix a possible pointer dereference after freeHarish Chegondi
If devm_add_action_or_reset() isn't successful, xe_eu_stall_fini() is invoked. So, unsuccessful return from devm_add_action_or_reset() shouldn't dereference gt->eu_stall as xe_eu_stall_fini() already frees it. Fix this issue. Fixes: 9a0b11d4cf3b ("drm/xe/eustall: Add support to init, enable and disable EU stall sampling") Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/eae49a414a7314921108e0388810aaee6261ad92.1741800396.git.harish.chegondi@intel.com (cherry picked from commit 278469ff569e1082d56b4a7af26fbaecef9fbf3b) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-03-20cxl/region: Fix the first aliased address miscalculationLi Ming
In extended linear cache(ELC) case, cxl_port_get_spa_cache_alias() helps to get the aliased address of a SPA, it considers the first address in CXL memory range is "region start + region cache size + 1", but it should be "region start + region cache size". So if a SPA is equal to "region start + region cache size", its aliased address should be "SPA - region cache size". Signed-off-by: Li Ming <ming.li@zohomail.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://patch.msgid.link/20250317070124.815028-1-ming.li@zohomail.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2025-03-20drm/xe: Fix exporting xe buffers multiple timesTomasz Rusinowicz
The `struct ttm_resource->placement` contains TTM_PL_FLAG_* flags, but it was incorrectly tested for XE_PL_* flags. This caused xe_dma_buf_pin() to always fail when invoked for the second time. Fix this by checking the `mem_type` field instead. Fixes: 7764222d54b7 ("drm/xe: Disallow pinning dma-bufs in VRAM") Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: intel-xe@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.8+ Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250218100353.2137964-1-jacek.lawrynowicz@linux.intel.com Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> (cherry picked from commit b96dabdba9b95f71ded50a1c094ee244408b2a8e) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-03-20Merge tag 'kvmarm-6.15' of ↵Paolo Bonzini
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for 6.15 - Nested virtualization support for VGICv3, giving the nested hypervisor control of the VGIC hardware when running an L2 VM - Removal of 'late' nested virtualization feature register masking, making the supported feature set directly visible to userspace - Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers - Paravirtual interface for discovering the set of CPU implementations where a VM may run, addressing a longstanding issue of guest CPU errata awareness in big-little systems and cross-implementation VM migration - Userspace control of the registers responsible for identifying a particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1), allowing VMs to be migrated cross-implementation - pKVM updates, including support for tracking stage-2 page table allocations in the protected hypervisor in the 'SecPageTable' stat - Fixes to vPMU, ensuring that userspace updates to the vPMU after KVM_RUN are reflected into the backing perf events
2025-03-20Merge tag 'zynqmp-soc-for-6.15' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann
soc/drivers arm64: ZynqMP SoC changes for 6.15 - Align fpga config status with firmware * tag 'zynqmp-soc-for-6.15' of https://github.com/Xilinx/linux-xlnx: firmware: xilinx: Dont send linux address to get fpga config get status Link: https://lore.kernel.org/r/CAHTX3d+T+_zvwAVqGO+J_+Yia+wXAGsaEbPi1ye1AUYXoq6dmw@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-03-20Merge tag 'net-6.14-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can, bluetooth and ipsec. This contains a last minute revert of a recent GRE patch, mostly to allow me stating there are no known regressions outstanding. Current release - regressions: - revert "gre: Fix IPv6 link-local address generation." - eth: ti: am65-cpsw: fix NAPI registration sequence Previous releases - regressions: - ipv6: fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw(). - mptcp: fix data stream corruption in the address announcement - bluetooth: fix connection regression between LE and non-LE adapters - can: - flexcan: only change CAN state when link up in system PM - ucan: fix out of bound read in strscpy() source Previous releases - always broken: - lwtunnel: fix reentry loops - ipv6: fix TCP GSO segmentation with NAT - xfrm: force software GSO only in tunnel mode - eth: ti: icssg-prueth: add lock to stats Misc: - add Andrea Mayer as a maintainer of SRv6" * tag 'net-6.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits) MAINTAINERS: Add Andrea Mayer as a maintainer of SRv6 Revert "gre: Fix IPv6 link-local address generation." Revert "selftests: Add IPv6 link-local address generation tests for GRE devices." net/neighbor: add missing policy for NDTPA_QUEUE_LENBYTES tools headers: Sync uapi/asm-generic/socket.h with the kernel sources mptcp: Fix data stream corruption in the address announcement selftests: net: test for lwtunnel dst ref loops net: ipv6: ioam6: fix lwtunnel_output() loop net: lwtunnel: fix recursion loops net: ti: icssg-prueth: Add lock to stats net: atm: fix use after free in lec_send() xsk: fix an integer overflow in xp_create_and_assign_umem() net: stmmac: dwc-qos-eth: use devm_kzalloc() for AXI data selftests: drv-net: use defer in the ping test phy: fix xa_alloc_cyclic() error handling dpll: fix xa_alloc_cyclic() error handling devlink: fix xa_alloc_cyclic() error handling ipv6: Set errno after ip_fib_metrics_init() in ip6_route_info_create(). ipv6: Fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw(). net: ipv6: fix TCP GSO segmentation with NAT ...
2025-03-20drm/i915/display: Fix build error without DRM_FBDEV_EMULATIONYue Haibing
In file included from <command-line>: ./drivers/gpu/drm/i915/display/intel_fbdev.h: In function ‘intel_fbdev_framebuffer’: ./drivers/gpu/drm/i915/display/intel_fbdev.h:32:16: error: ‘NULL’ undeclared (first use in this function) 32 | return NULL; | ^~~~ ./drivers/gpu/drm/i915/display/intel_fbdev.h:1:1: note: ‘NULL’ is defined in header ‘<stddef.h>’; did you forget to ‘#include <stddef.h>’? +++ |+#include <stddef.h> 1 | /* SPDX-License-Identifier: MIT */ ./drivers/gpu/drm/i915/display/intel_fbdev.h:32:16: note: each undeclared identifier is reported only once for each function it appears in 32 | return NULL; | ^~~~ Build fails if CONFIG_DRM_FBDEV_EMULATION is n, add missing header file. Fixes: 9fa154f40eb6 ("drm/{i915,xe}: Run DRM default client setup") Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250315120143.2344958-1-yuehaibing@huawei.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 97e81f78d3cbf061a809bbb8180a5b96395b8e03) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-03-20drm/i915/watermark: Check bounds for scaler_users for dsc prefill latencyAnkit Nautiyal
Currently, during the computation of global watermarks, the latency for each scaler user is calculated to compute the DSC prefill latency. At this point, the number of scaler users can exceed the number of supported scalers, which is checked later in intel_atomic_setup_scalers(). This can cause issues when the number of scaler users exceeds the number of supported scalers. While checking for DSC prefill, ensure that the number of scaler users does not exceed the number of supported scalers. Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4341 Fixes: a9b14af999b0 ("drm/i915/dsc: Check if vblank is sufficient for dsc prefill") Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250227034106.1638203-1-ankit.k.nautiyal@intel.com (cherry picked from commit 5d6c69b712f9cb34063ef32168ce6a12af8acf0c) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-03-20Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "Collected driver fixes from the last few weeks, I was surprised how significant many of them seemed to be. - Fix rdma-core test failures due to wrong startup ordering in rxe - Don't crash in bnxt_re if the FW supports more than 64k QPs - Fix wrong QP table indexing math in bnxt_re - Calculate the max SRQs for userspace properly in bnxt_re - Don't try to do math on errno for mlx5's rate calculation - Properly allow userspace to control the VLAN in the QP state during INIT->RTR for bnxt_re - 6 bug fixes for HNS: - Soft lockup when processing huge MRs, add a cond_resched() - Fix missed error unwind for doorbell allocation - Prevent bad send queue parameters from userspace - Wrong error unwind in qp creation - Missed xa_destroy during driver shutdown - Fix reporting to userspace of max_sge_rd, hns doesn't have a read/write difference" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/hns: Fix wrong value of max_sge_rd RDMA/hns: Fix missing xa_destroy() RDMA/hns: Fix a missing rollback in error path of hns_roce_create_qp_common() RDMA/hns: Fix invalid sq params not being blocked RDMA/hns: Fix unmatched condition in error path of alloc_user_qp_db() RDMA/hns: Fix soft lockup during bt pages loop RDMA/bnxt_re: Avoid clearing VLAN_ID mask in modify qp path RDMA/mlx5: Handle errors returned from mlx5r_ib_rate() RDMA/bnxt_re: Fix reporting maximum SRQs on P7 chips RDMA/bnxt_re: Add missing paranthesis in map_qp_id_to_tbl_indx RDMA/bnxt_re: Fix allocation of QP table RDMA/rxe: Fix the failure of ibv_query_device() and ibv_query_device_ex() tests
2025-03-20Merge tag 'mmc-v6.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC host fixes from Ulf Hansson: - sdhci-brcmstb: Fix CQE suspend/resume support - atmel-mci: Add a missing clk_disable_unprepare() in ->probe() * tag 'mmc-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-brcmstb: add cqhci suspend/resume to PM ops mmc: atmel-mci: Add missing clk_disable_unprepare()
2025-03-20Merge tag 'efi-fixes-for-v6.14-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: "Here's a final batch of EFI fixes for v6.14. The efivarfs ones are fixes for changes that were made this cycle. James's fix is somewhat of a band-aid, but it was blessed by the VFS folks, who are working with James to come up with something better for the next cycle. - Avoid physical address 0x0 for random page allocations - Add correct lockdep annotation when traversing efivarfs on resume - Avoid NULL mount in kernel_file_open() when traversing efivarfs on resume" * tag 'efi-fixes-for-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efivarfs: fix NULL dereference on resume efivarfs: use I_MUTEX_CHILD nested lock to traverse variables on resume efi/libstub: Avoid physical address 0x0 when doing random allocation
2025-03-20irqdomain: soc: Switch to irq_find_mapping()Jiri Slaby (SUSE)
irq_linear_revmap() is deprecated, so remove all its uses and supersede them by an identical call to irq_find_mapping(). Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Cc: Qiang Zhao <qiang.zhao@nxp.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20250319092951.37667-49-jirislaby@kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2025-03-20ASoC: wm8904: Add DMIC and DRC supportMark Brown
Merge series from Francesco Dolcini <francesco@dolcini.it>: This patch series adds DMIC and DRC support to the WM8904 driver, a new of_ helper is added to simplify the driver code. DRC functionality is added in the same patch series to provide the necessary dynamic range control to make DMIC support useful. The WM8904 supports digital microphones on two of its inputs: IN1L/DMICDAT1 and IN1R/DMICDAT2. These two inputs can either be connected to an ADC or to the DMIC system. There is an ADC for each line, and only one DMIC block. This DMIC block is either connected to DMICDAT1 or to DMICDAT2. One DMIC data line supports two digital microphones via time multiplexing. The pin's functionality is decided during hardware design (IN1L vs DMICDAT1 and IN1R vs DMICDAT2). This is reflected in the Device Tree. If one line is analog and one is DMIC, we need to be able to switch between ADC and DMIC at runtime. The DMIC source is known from the Device Tree. If both are DMIC inputs, we need to be able to switch the DMIC source. There is no need to switch between ADC and DMIC at runtime. Therefore, kcontrols are dynamically added by the driver depending on its Device Tree configuration. This is a heavy rework of a previous patch series provided by Alifer Moraes and Pierluigi Passaro, https://lore.kernel.org/lkml/20220307141041.27538-1-alifer.m@variscite.com.
2025-03-20serial: stm32: do not deassert RS485 RTS GPIO prematurelyCheick Traore
If stm32_usart_start_tx is called with an empty xmit buffer, RTS GPIO could be deasserted prematurely, as bytes in TX FIFO are still transmitting. So this patch remove rts disable when xmit buffer is empty. Fixes: d7c76716169d ("serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode") Cc: stable <stable@kernel.org> Signed-off-by: Cheick Traore <cheick.traore@foss.st.com> Link: https://lore.kernel.org/r/20250320152540.709091-1-cheick.traore@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20serial: 8250: add driver for NI UARTsChaitanya Vadrevu
The National Instruments (NI) 16550 is a 16550-like UART with larger FIFOs and embedded RS-232/RS-485 transceiver control circuitry. This patch adds a driver that can operate this UART, which is used for onboard serial ports in several NI embedded controller designs. Portions of this driver were originally written by Jaeden Amero and Karthik Manamcheri, with extensive cleanups and refactors since by Brenda Streiff. Cc: Gratian Crisan <gratian.crisan@emerson.com> Co-developed-by: Jason Smith <jason.smith@emerson.com> Signed-off-by: Jason Smith <jason.smith@emerson.com> Signed-off-by: Chaitanya Vadrevu <chaitanya.vadrevu@emerson.com> Link: https://lore.kernel.org/r/a3b0df6d-1dd5-4cc4-a7e1-4ed51fb9e4cc@emerson.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20serial: icom: fix code format problemsCharles Han
Fix below inconsistent indenting smatch warning. smatch warnings: drivers/tty/serial/icom.c:1768 icom_probe() warn: inconsistent indenting Removed that useless (void *), the code would fit on a single 100c line Removed '{' and '}'. Signed-off-by: Charles Han <hanchunchao@inspur.com> Link: https://lore.kernel.org/r/20250305095120.7518-1-hanchunchao@inspur.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20serial: sh-sci: Save and restore more registersGeert Uytterhoeven
On (H)SCIF with a Baud Rate Generator for External Clock (BRG), there are multiple ways to configure the requested serial speed. If firmware uses a different method than Linux, and if any debug info is printed after the Bit Rate Register (SCBRR) is restored, but before termios is reconfigured (which configures the alternative method), the system may lock-up during resume. Fix this by saving and restoring the contents of the BRG Frequency Division (SCDL) and Clock Select (SCCKS) registers as well. Also save and restore the HSCIF's Sampling Rate Register (HSSRR), which configures the sampling point, and the SCIFA/SCIFB's Serial Port Control and Data Registers (SCPCR/SCPDR), which configure the optional control flow signals. After this, all registers that are not saved/restored are either: - read-only, - write-only, - status registers containing flags with clear-after-set semantics, - FIFO Data Count Trigger registers, which do not matter much for the serial console. Fixes: 22a6984c5b5df8ea ("serial: sh-sci: Update the suspend/resume support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/11c2eab45d48211e75d8b8202cce60400880fe55.1741114989.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20tty: serial: pl011: remove incorrect of_match_ptr annotationArnd Bergmann
Building with W=1 shows a warning about sbsa_uart_of_match being unused when CONFIG_OF is disabled: drivers/tty/serial/amba-pl011.c:2945:34: error: unused variable 'sbsa_uart_of_match' [-Werror,-Wunused-const-variable] The driver is not actually used on any machines that are built with CONFIG_OF disabled, so using of_match_ptr() won't save any actual memory, and it can be best removed. The corresponding ACPI_PTR() annotation does save a few bytes on 32-bit arm since CONFIG_ACPI is not available, but for consistency it seems better to remove both along with the __maybe_unused annotation on the ACPI table. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20250225163556.4169086-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20tty: serial: lpuart: only disable CTS instead of overwriting the whole ↵Sherry Sun
UARTMODIR register No need to overwrite the whole UARTMODIR register before waiting the transmit engine complete, actually our target here is only to disable CTS flow control to avoid the dirty data in TX FIFO may block the transmit engine complete. Also delete the following duplicate CTS disable configuration. Fixes: d5a2e0834364 ("tty: serial: lpuart: disable flow control while waiting for the transmit engine to complete") Cc: stable <stable@kernel.org> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20250307065446.1122482-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20tty: caif: removed unused function debugfs_tx()Simon Horman
Remove debugfs_tx() which was added when the caif driver was added in commit 9b27105b4a44 ("net-caif-driver: add CAIF serial driver (ldisc)") but it has never been used. Flagged by LLVM 19.1.7 W=1 builds. Signed-off-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20250320-caif-debugfs-tx-v1-1-be5654770088@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20serial: 8250_dma: terminate correct DMA in tx_dma_flush()John Keeping
When flushing transmit side DMA, it is the transmit channel that should be terminated, not the receive channel. Fixes: 9e512eaaf8f40 ("serial: 8250: Fix fifo underflow on flush") Cc: stable <stable@kernel.org> Reported-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: John Keeping <jkeeping@inmusicbrands.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20250224121831.1429323-1-jkeeping@inmusicbrands.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20tty: serial: fsl_lpuart: rename register variables more specificallySherry Sun
There are many fuzzy register variables in the lpuart driver, such as temp, tmp, val, reg. Let's give these register variables more specific names. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20250312023904.1343351-4-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20tty: serial: fsl_lpuart: use port struct directly to simply codeSherry Sun
Most lpuart functions have the parameter struct uart_port *port, but still use the &sport->port to get the uart_port instead of use it directly, let's simply the code logic, directly use this struct instead of covert it from struct sport. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20250312023904.1343351-3-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20tty: serial: fsl_lpuart: Use u32 and u8 for register variablesSherry Sun
Use u32 and u8 rather than unsigned long or unsigned char for register variables for clarity and consistency. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20250312023904.1343351-2-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20tty: serial: fsl_lpuart: disable transmitter before changing RS485 related ↵Sherry Sun
registers According to the LPUART reference manual, TXRTSE and TXRTSPOL of MODIR register only can be changed when the transmitter is disabled. So disable the transmitter before changing RS485 related registers and re-enable it after the change is done. Fixes: 67b01837861c ("tty: serial: lpuart: Add RS485 support for 32-bit uart flavour") Cc: stable <stable@kernel.org> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250312022503.1342990-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20tty: serial: 8250: Add Brainboxes XC devicesCameron Williams
These ExpressCard devices use the OxPCIE chip and can be used with this driver. Signed-off-by: Cameron Williams <cang1@live.co.uk> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/DB7PR02MB3802907A9360F27F6CD67AAFC4D62@DB7PR02MB3802.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20tty: serial: 8250: Add some more device IDsCameron Williams
These card IDs got missed the first time around. Cc: stable <stable@kernel.org> Signed-off-by: Cameron Williams <cang1@live.co.uk> Link: https://lore.kernel.org/r/DB7PR02MB380295BCC879CCF91315AC38C4C12@DB7PR02MB3802.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20serial: 8250_dw: Comment possible corner cases in serial_out() implementationAndy Shevchenko
8250 DesignWare driver uses a few custom implementations of the serial_out(). These implementations are carefully made to avoid infinite loops. But this is not obvious from looking at the code. Comment the possible corner cases in the respective functions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250317094021.1201512-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20serial: switch change_irq and change_port to bool in uart_set_info()Jiri Slaby (SUSE)
change_irq and change_port are boolean variables. Mark them as such (instead of uint). Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20250317070046.24386-32-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20serial: 8250_port: simplify serial8250_request_std_resource()Jiri Slaby (SUSE)
Return immediately from the error locations or switch-case ends. It is therefore easier to see the flow. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20250317070046.24386-31-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20serial: 8250_port: do not use goto for UPQ_NO_TXEN_TEST code flowJiri Slaby (SUSE)
This is unnecessary here and makes the code harder to follow. Invert the condition and drop the goto+label. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20250317070046.24386-30-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20serial: 8250_rsa: simplify rsa8250_{request/release}_resource()Jiri Slaby (SUSE)
* Use already defined 'port' for fetching start/offset, and size. * Return from the switch immediately -- so it is clear what is returned and when. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20250317070046.24386-29-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20serial: 8250: use serial_port_in/out() helpersJiri Slaby (SUSE)
There are serial_port_in/out() helpers to be used instead of direct p->serial_in/out(). Use them in various 8250 drivers. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> -- [v2] * Use serial_port_in/out() and not serial_in/out() [Andy] Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # 8250_dw Link: https://lore.kernel.org/r/20250317070046.24386-28-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20serial: pass struct uart_state to uart_line_info()Jiri Slaby (SUSE)
uart_line_info() wants to work with struct uart_state. Do not pass a driver and an index. Pass the precomputed struct directly. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20250317070046.24386-27-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20serial: remove redundant tty_port_link_device()Jiri Slaby (SUSE)
The linking is done implicitly by tty_port_register_device_attr_serdev() few lines below. So drop this explicit tty_port_link_device(). Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20250317070046.24386-26-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20tty: sunsu: remove unused serial_icr_read()Jiri Slaby (SUSE)
It is commented and never used. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Link: https://lore.kernel.org/r/20250317070046.24386-25-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20tty: sunsu: drop serial_{in,out}p()Jiri Slaby (SUSE)
They are simple wrappers around serial_{in/out}() without actually pausing the execution. Since ever. So drop these useless wrappers. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Link: https://lore.kernel.org/r/20250317070046.24386-24-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20tty: staging/greybus: pass tty_driver flags to tty_alloc_driver()Jiri Slaby (SUSE)
tty_alloc_driver() is supposed to receive tty driver flags. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Acked-by: Johan Hovold <johan@kernel.org> Cc: David Lin <dtwlin@gmail.com> Cc: Alex Elder <elder@kernel.org> Cc: greybus-dev@lists.linaro.org Cc: linux-staging@lists.linux.dev Reviewed-by: Alex Elder <elder@riscstar.com> Link: https://lore.kernel.org/r/20250317070046.24386-23-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20tty: moxa: carve out special ioctls and extra tty_portJiri Slaby (SUSE)
These ioctls are undocumented and not exposed -- they are defined locally. Given they need a special tty_port just for them, this is very ugly. So drop this whole functionality. It is barely used for something real. (And if it is, we'd need a common functionality to all drivers.) Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20250317070046.24386-21-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20tty: moxa: drop ISA supportJiri Slaby (SUSE)
I doubt anyone actually uses this driver (unlike mxser.c and serial moxa driven devices). Even less there is anyone with a moxa ISA card. The newer mxser dropped the support for ISA in 2021. Let this moxa follow now. Good diet. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20250317070046.24386-20-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20tty: moxa: drop version dump to logsJiri Slaby (SUSE)
The arbitrary MOXA_VERSION is dumped to the logs when the driver is loaded. Avoid this as a driver should be silent unless something breaks. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20250317070046.24386-19-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20tty: mmc: sdio: use bool for cts and remove parenthesesJiri Slaby (SUSE)
'cts' in sdio_uart_check_modem_status() is considered a 'bool', but typed as signed 'int'. Make it 'bool' so it is clear the code does not care about the masked value, but true/false. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-mmc@vger.kernel.org Link: https://lore.kernel.org/r/20250317070046.24386-18-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20tty: serdev: drop serdev_controller_ops::write_room()Jiri Slaby (SUSE)
In particular, serdev_device_write_room() is not called, so the whole serdev's write_room() can go. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Cc: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20250317070046.24386-17-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20tty: tty_driver: document both {,__}tty_alloc_driver() properlyJiri Slaby (SUSE)
__tty_alloc_driver()'s kernel-doc needed some care: describe the return value using the standard "Returns:", and use the new enum tty_driver_flag for @flags. Then, the tty_alloc_driver() macro was undocumented, but referenced many times in the docs. Copy the docs from the above (except the @owner parameter, obviously). Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20250317070046.24386-15-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20tty: n_tty: move more_to_be_read to the end of n_tty_read()Jiri Slaby (SUSE)
n_tty_read() contains "we need more data" handling deep in that function. And there is also a label (more_to_be_read) as we handle this situation from two places. It makes more sense to have all "return"s accumulated at the end of functions. And "goto" from multiple places there. Therefore, do this with the "more_to_be_read" label in n_tty_read(). After this and the previous changes, n_tty_read() is now much more easier to follow. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20250317070046.24386-12-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20tty: n_tty: extract n_tty_wait_for_input()Jiri Slaby (SUSE)
n_tty_read() is a very long function doing too much of different stuff. Extract the "wait for input" to a separate function: n_tty_wait_for_input(). It returns an error (< 0), no input (0), or has potential input (1). Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20250317070046.24386-11-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-20tty: n_tty: extract n_tty_continue_cookie() from n_tty_read()Jiri Slaby (SUSE)
n_tty_read() is a very long function doing too much of different stuff. Extract the "cookie" (continuation read) handling to a separate function: n_tty_continue_cookie(). Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20250317070046.24386-10-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-14 11:33:47 +0000