summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-05-24drbd: fix schedule in atomicLars Ellenberg
An administrative detach used to request a state change directly to D_DISKLESS, first suspending IO to avoid the last put_ldev() occuring from an endio handler, potentially in irq context. This is not enough on the receiving side (typically secondary), we may miss some peer_req on the way to local disk, which then may do the last put_ldev() from their drbd_peer_request_endio(). This patch makes the detach always go through the intermediate D_FAILED state. We may consider to rename it D_DETACHING. Alternative approach would be to create yet an other work item to be scheduled on the worker, do the destructor work from there, and get the timing right. manually picked commit 564040f from the drbd 8.4 branch. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-05-24drbd: Take a more conservative approach when deciding max_bio_sizePhilipp Reisner
The old (optimistic) implementation could shrink the bio size on an primary device. Shrinking the bio size on a primary device is bad. Since there we might get BIOs with the old (bigger) size shortly after we published the new size. The new implementation is more conservative, and eventually increases the max_bio_size on a primary device (which is valid). It does so, when it knows the local limit AND the remote limit. We cache the last seen max_bio_size of the peer in the meta data, and rely on that, to make the operation of single nodes more efficient. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-05-24drbd: Fixed state transitions after async outdate-peer-handler returnedPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-05-24drbd: Disallow the peer_disk_state to be D_OUTDATED while connectedPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-05-24drbd: Fix for the connection problems on high latency linksPhilipp Reisner
It seems that the real cause of all the issues where that we did not noticed in drbd_try_connect() when the other guy closes one socket if the round trip time gets higher than 100ms. There were that 100ms hard coded! Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-05-24drbd: fix potential activity log refcount imbalance in error pathLars Ellenberg
It is no longer sufficient to trigger on local WRITE, we need to check on (rq_state & RQ_IN_ACT_LOG) before calling drbd_al_complete_io also in the error path. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-05-24drbd: Only downgrade the disk state in case of disk failuresPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-05-24drbd: fix disconnect/reconnect loop, if ping-timeout == ping-intLars Ellenberg
If there is no replication traffic within the idle timeout (ping-int seconds), DRBD will send a P_PING, and adjust the timeout to ping-timeout. If there is no P_PING_ACK received within this ping-timeout, DRBD finally drops the connection, and tries to re-establish it. To decide which timeout was active, we compared the current timeout with the ping-timeout, and dropped the connection, if that was the case. By default, ping-int is 10 seconds, ping-timeout is 500 ms. Unfortunately, if you configure ping-timeout to be the same as ping-int, expiry of the idle-timeout had been mistaken for a missing ping ack, and caused an immediate reconnection attempt. Fix: Allow both timeouts to be equal, use a local variable to store which timeout is active. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-05-24drbd: fix potential distributed deadlockLars Ellenberg
We limit ourselves to a configurable maximum number of pages used as temporary bio pages. If the configured "max_buffers" is not big enough to match the bandwidth of the respective deployment, a distributed deadlock could be triggered by e.g. fast online verify and heavy application IO. TCP connections would block on congestion, because both receivers would wait on pages to become available. Fortunately the respective senders in this case would be able to give back some pages already. So do that. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-05-24drbd: Fix for application IO with the on-io-error=pass-on policyPhilipp Reisner
In case a write failes on the local disk, go into D_INCONSISTENT disk state. That causes future reads of that block to be shipped to the peer. Read retry remote was already in place. Actually the documentation needs to get fixed now. Since the application is still shielded from the error. (as long as we have only a single disk failing) The difference to detach is that we keep the disk. And therefore might keep all the other, still working sectors up to date. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-05-24Merge branch 'for_2.6.40/pm-cleanup' of ↵Tony Lindgren
ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2011-05-24fbdev/amifb: Remove superfluous alignment of frame buffer memoryGeert Uytterhoeven
amiga_chip_alloc() already aligns to the PAGE_SIZE Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24fbdev/amifb: Do not call panic() if there's not enough Chip RAMGeert Uytterhoeven
Fail gracefully instead. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24fbdev/amifb: Correct check for video memory sizeGeert Uytterhoeven
The check should compare the available memory size with the highest allocation value (VIDEOMEMSIZE_*_2M), not with the lowest value (VIDEOMEMSIZE_*_1M). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24video: mb862xxfb: Require either FB_MB862XX_PCI_GDC or FB_MB862XX_LIMEBen Hutchings
The driver can be built as either a PCI or platform (OF) driver. It might make sense to built it as both (though that is not currently possible) but it certainly doesn't make sense to build it as neither! Add dependencies and add a choice group to ensure that exactly one of FB_MB862XX_PCI_GDC and FB_MB862XX_LIME is selected. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24video: s3c-fb: add window variant information for S5PJingoo Han
Compared to s3c64xx, S5P series such as S5PC100 and S5PV210 have the different window features including valid bpp, palette size and palette bpp. Therefore, window variant information for S5P should be added. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24video: s3c-fb: add additional validate bppsJingoo Han
Additional validate bpps are added to windows as follows: window0: 18 bpp for RGB666 window1, 2 and 3: 28 bpp for ARGB4888 window4: 19 bpp for ARGB1666, 28 bpp for ARGB4888 Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24video: s3c-fb: correct window osd size offset valuesJingoo Han
Offset values for OSD size registers of window 1 and 2 are corrected. The offset values of OSD size registers are as follows: window0: VIDOSDC (0x8) window1 and 2: VIDOSDD (0xc) window3 and 4: not present Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24udlfb: include prefetch.h explicitlyStephen Rothwell
Commit e66eed651fd1 ("list: remove prefetching from regular list iterators") removed the include of prefetch.h from list.h, so we need to include it explicitly, now. fixes this build error on powerpc: drivers/video/udlfb.c: In function 'dlfb_compress_hline': drivers/video/udlfb.c:421: error: implicit declaration of function 'prefetch_range' Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24drivers/video/s3c2410fb.c: Convert release_resource to release_mem_regionJulia Lawall
Request_mem_region should be used with release_mem_region, not release_resource. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @s exists@ expression e1,e2,e3,e4,e; @@ *e4 = request_mem_region(e1,e2,e3) ... when != e4 = e *release_resource(e4); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24drivers/video/sm501fb.c: Convert release_resource to release_mem_regionJulia Lawall
Request_mem_region should be used with release_mem_region, not release_resource. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @s exists@ expression e1,e2,e3,e4,e; @@ *e4 = request_mem_region(e1,e2,e3) ... when != e4 = e *release_resource(e4); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24drivers/video: Convert release_resource to release_mem_regionJulia Lawall
Request_mem_region should be used with release_mem_region, not release_resource. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @s exists@ expression e1,e2,e3,e4,e; @@ *e4 = request_mem_region(e1,e2,e3) ... when != e4 = e *release_resource(e4); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24video, udlfb: Fix two build warnings about 'ignoring return value'Liu Yuan
build warning: ... drivers/video/udlfb.c:1590: warning: ignoring return value of ‘device_create_file’, declared with attribute warn_unused_result drivers/video/udlfb.c:1592: warning: ignoring return value of ‘device_create_bin_file’, declared with attribute warn_unused_result ... So add two checks to get rid of 'em. Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24Merge branch 'next' into for-linusDmitry Torokhov
2011-05-24savagefb: Enable LCD detection on mobile TwisterTormod Volden
Copy and paste from the Xorg DDX. Tested on TwisterK (Compaq Presario 700). Signed-off-by: Tormod Volden <debian.tormod@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24savagefb: New S3_TWISTER and S3_PROSAVAGEDDR chip familiesTormod Volden
Realign the chip families with the Xorg DDX Signed-off-by: Tormod Volden <debian.tormod@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24video: da8xx-fb: fix section mismatch warningaxel lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24Merge branches 'common/fbdev' and 'common/fbdev-meram' of ↵Paul Mundt
master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
2011-05-24fbdev: sh_mobile_lcdc: remove runtime PM calls from the notifierGuennadi Liakhovetski
The notifier function calls sh_mobile_lcdc_stop() and sh_mobile_lcdc_start(), which already take care about the runtime PM state. Remove redundant calls. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24fbdev: sh_mobile_lcdc: reduce scope of a variableGuennadi Liakhovetski
The "ret" variable in sh_mobile_lcdc_start() is only used at one location, move its definition to the inner-most scope. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24fbdev: sh_mobile_hdmi: runtime suspend HDMI on error and clean up pathsGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24Merge branch 'for-paul' of git://gitorious.org/linux-omap-dss2/linuxPaul Mundt
Conflicts: drivers/video/omap2/dss/dsi.c drivers/video/omap2/dss/dss_features.c drivers/video/omap2/dss/dss_features.h Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2011-05-24efifb: fix int to pointer cast warningKonstantin Khlebnikov
drivers/video/efifb.c:247: warning: cast to pointer from integer of different size Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-24coldfire_qspi compile fixSteven King
The m68k/m68knommu merge broke the qspi build. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-05-24net/irda: convert bfin_sir to common Blackfin UART headerMike Frysinger
No need to duplicate these defines now that the common Blackfin code has unified these for all UART devices. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-23Merge branch 'sh-latest' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits) sh: Ignore R_SH_NONE module relocations. SH: SE7751: Fix pcibios_map_platform_irq prototype. sh: remove warning and warning_symbol from struct stacktrace_ops sh: wire up sys_sendmmsg. clocksource: sh_tmu: Runtime PM support clocksource: sh_tmu: __clocksource_updatefreq_hz() update clocksource: sh_cmt: Runtime PM support clocksource: sh_cmt: __clocksource_updatefreq_hz() update dmaengine: shdma: synchronize RCU before freeing, simplify spinlock dmaengine: shdma: add runtime- and system-level power management dmaengine: shdma: fix locking sh: sh-sci: sh7377 and sh73a0 build fixes sh: cosmetic improvement: use an existing pointer serial: sh-sci: suspend/resume wakeup support V2 serial: sh-sci: Runtime PM support sh: select IRQ_FORCED_THREADING. sh: intc: Set virtual IRQs as nothread. sh: fixup fpu.o compile order i2c: add a module alias to the sh-mobile driver ALSA: add a module alias to the FSI driver ...
2011-05-23Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (247 commits) [media] gspca - sunplus: Fix some warnings and simplify code [media] gspca: Fix some warnings tied to 'no debug' [media] gspca: Unset debug by default [media] gspca - cpia1: Remove a bad conditional compilation instruction [media] gspca - main: Remove USB traces [media] gspca - main: Version change to 2.13 [media] gspca - stk014 / t613: Accept the index 0 in querymenu [media] gspca - kinect: Remove __devinitdata [media] gspca - cpia1: Fix some warnings [media] video/Kconfig: Fix mis-classified devices [media] support for medion dvb stick 1660:1921 [media] tm6000: fix uninitialized field, change prink to dprintk [media] cx231xx: Add support for Iconbit U100 [media] saa7134 add new TV cards [media] Use a more consistent value for RC repeat period [media] cx18: Move spinlock and vb_type initialisation into stream_init [media] tm6000: remove tm6010 sif audio start and stop [media] tm6000: remove unused exports [media] tm6000: add pts logging [media] tm6000: change from ioctl to unlocked_ioctl ...
2011-05-23hwmon: (coretemp) Add comments describing the handling of HT CPUsGuenter Roeck
The coretemp driver provides a single set of device attributes for each physical core of a HT CPU to avoid duplicate sensors. This functionality was introduced with commit d883b9f09772 ("hwmon: (coretemp) Skip duplicate CPU entries"). Commit e40cc4bdfd4b ("x86/hwmon: register alternate sibling upon CPU removal") extends this functionality to register the HT sibling of a CPU which is taken offline, to ensure that sensor attributes are provided if at least one HT sibling of a core is online. Add comments into the code describing the functionality in some more detail. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-24drivers/gpu/drm/radeon/atom.c: fix warningAndrew Morton
udelay() doesn't like 8-bit arguments: drivers/gpu/drm/radeon/atom.c: In function 'atom_op_delay': drivers/gpu/drm/radeon/atom.c:653: warning: comparison is always false due to limited range of data type while we're there, use msleep() rather than open-coding it. Cc: David Airlie <airlied@linux.ie> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-24drm/radeon/kms: bump kms version numberAlex Deucher
- proper bank size for fusion for 2D tiling. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-24drm/radeon/kms: properly set num banks for fusion asicsAlex Deucher
Needed by userspace for 2D tiled buffer alignment Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-24drm/radeon/kms/atom: move dig phy init out of modesettingAlex Deucher
It only needs to be called once at startup, not for every modeset. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-24drm/radeon/kms/cayman: fix typo in register maskAlex Deucher
Noticed by Droste on IRC. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-24drm/radeon/kms: fix typo in spread spectrum codeAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-23Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (27 commits) PCI: Don't use dmi_name_in_vendors in quirk PCI: remove unused AER functions PCI/sysfs: move bus cpuaffinity to class dev_attrs PCI: add rescan to /sys/.../pci_bus/.../ PCI: update bridge resources to get more big ranges when allocating space (again) KVM: Use pci_store/load_saved_state() around VM device usage PCI: Add interfaces to store and load the device saved state PCI: Track the size of each saved capability data area PCI/e1000e: Add and use pci_disable_link_state_locked() x86/PCI: derive pcibios_last_bus from ACPI MCFG PCI: add latency tolerance reporting enable/disable support PCI: add OBFF enable/disable support PCI: add ID-based ordering enable/disable support PCI hotplug: acpiphp: assume device is in state D0 after powering on a slot. PCI: Set PCIE maxpayload for card during hotplug insertion PCI/ACPI: Report _OSC control mask returned on failure to get control x86/PCI: irq and pci_ids patch for Intel Panther Point DeviceIDs PCI: handle positive error codes PCI: check pci_vpd_pci22_wait() return PCI: Use ICH6_GPIO_EN in ich6_lpc_acpi_gpio ... Fix up trivial conflicts in include/linux/pci_ids.h: commit a6e5e2be4461 moved the intel SMBUS ID definitons to the i2c-i801.c driver.
2011-05-23Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (137 commits) ARM: bcmring: convert to use sp804 clockevents ARM: bcmring: convert to sp804 clocksource ARM: 6912/1: bcmring: Add clkdev table in init_early clockevents: ARM sp804: obtain sp804 timer rate via clks clockevents: ARM sp804: allow clockevent name to be specified clocksource: ARM sp804: obtain sp804 timer rate via clks clocksource: ARM sp804: allow clocksource name to be specified clocksource: convert OMAP1 to 32-bit down counting clocksource clocksource: convert MXS timrotv2 to 32-bit down counting clocksource clocksource: convert SPEAr platforms 16-bit up counting clocksource clocksource: convert Integrator/AP 16-bit down counting clocksource clocksource: convert W90x900 24-bit down counting clocksource clocksource: convert ARM 32-bit down counting clocksources clocksource: convert ARM 32-bit up counting clocksources clocksource: add common mmio clocksource ARM: update sa1100 to reflect PXA updates ARM: omap1: convert to using readl/writel instead of volatile struct ARM: omap1: delete useless interrupt handler ARM: s5p: consolidate selection of timer register ARM: 6939/1: fix missing 'cpu_relax()' declaration ...
2011-05-23ehea: Fix multicast registration on semi-promiscuous modeBreno Leitao
Ehea will not register multicast groups in phyp if the physical interface is in promiscuous mode. But it should register if the logical port is in promiscuous mode, but the physical port is not. Ehea physical promiscuous mode is defined by ehea_port->promisc, while logical port is defined by IFF_PROMISC. So currently, if the user set the interface in promiscuous mode, IGMP will not be registred in PHYP, and PHYP will never pass the multicast packet to the logical port, which is bad So, this patch just fixes it, assuring that we register in phyp if the physical port is not on promiscuous mode. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-23ptp: Fix dp83640 build warning when building staticallyJohn Stultz
If the dp83640 driver is not built as a module, the MODULE_DEVICE_TABLE reference to dp83640_tbl nops out. Since the table isn't referenced elsewhere, it it causes the following warning: drivers/net/phy/dp83640.c:1095: warning: ‘dp83640_tbl’ defined but not used This apparently is common with mdio_device_id table structures, and is avoided by using __maybe_unused annotation. Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-05-23ptp: Added a clock driver for the National Semiconductor PHYTER.Richard Cochran
This patch adds support for the PTP clock found on the DP83640. The basic clock operations and one external time stamp have been implemented. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: John Stultz <john.stultz@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-16 13:48:38 +0000