summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-05-30qtnfmac: cancel scan on disconnectAndrey Shevchenko
Cancel scan operation on STA disconnect. Signed-off-by: Andrey Shevchenko <ashevchenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: fix bg_scan_period parameter processingAndrey Shevchenko
Do not process bg_scan_period parameter in qtnfmac driver. Pass correct values as is. In the case of invalid values pass default value. Leave further processing to firmware. Signed-off-by: Andrey Shevchenko <ashevchenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: fix firmware command error pathDmitry Lebed
Free command skb if bus state is not QTNF_FW_STATE_ACTIVE. Signed-off-by: Dmitry Lebed <dlebed@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: improve control path timeout handlingDmitry Lebed
Control path will not be operational after firmware failure. Change bus state to QTNF_FW_STATE_EP_DEAD after the control path timeout. Don't wait for timeout if control path is already dead. Signed-off-by: Dmitry Lebed <dlebed@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: cleanup wdev structure between its usesSergey Matyukevich
Driver uses statically allocated wdev structures for each virtual interface. However wdev structure is not properly cleaned up between its uses. As a result, various bugs appear when userspace tools like hostapd were not gracefully stopped. In particular, this commit fixes the following issue: - start hostapd with more than 2 mBSS - kill hostapd using SIGKILL - start again hostapd with more than 2 mBSS However only two mBSS entities will be started: primary and the last BSS listed in hostapd config. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: decode error codes from firmware repliesIgor Mitsyanko
Introduce a function that will map an error code reported in reply to a firmware command, into one of standard errno codes. Use additional error codes to improve error reporting for MAC address changes. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: simplify notationSergey Matyukevich
Shorten line lengths using a more compact notation to access mac info. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: remove unused function declarationsAndrey Shevchenko
Functions qtnf_cmd_resp_parse and qtnf_cmd_resp_check have been removed. Remove their declarations as well. Signed-off-by: Andrey Shevchenko <ashevchenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30drm/v3d: add CONFIG_MMU dependencyArnd Bergmann
Without CONFIG_MMU, we get a link error: drivers/gpu/drm/v3d/v3d_bo.o: In function `v3d_gem_fault': v3d_bo.c:(.text+0x3ca): undefined reference to `vm_insert_mixed' The other drivers with this problem already depend on CONFIG_MMU, so let's do the same thing here. Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180525155030.3667352-5-arnd@arndb.de
2018-05-30drm/vc4: Fix leak of the file_priv that stored the perfmon.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 65101d8c9108 ("drm/vc4: Expose performance counters to userspace") Link: https://patchwork.freedesktop.org/patch/msgid/20180409205813.7077-1-eric@anholt.net Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-05-30platform/chrome: Use to_cros_ec_dev more broadlyGwendal Grignou
Move to_cros_ec_dev macro to cros_ec.h and use it when the private ec object is needed from device object. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Benson Leung <bleung@chromium.org>
2018-05-30drm/bridge/synopsys: dw-hdmi: fix dw_hdmi_setup_rx_senseNeil Armstrong
The dw_hdmi_setup_rx_sense exported function should not use struct device to recover the dw-hdmi context using drvdata, but take struct dw_hdmi directly like other exported functions. This caused a regression using Meson DRM on S905X since v4.17-rc1 : Internal error: Oops: 96000007 [#1] PREEMPT SMP [...] CPU: 0 PID: 124 Comm: irq/32-dw_hdmi_ Not tainted 4.17.0-rc7 #2 Hardware name: Libre Technology CC (DT) [...] pc : osq_lock+0x54/0x188 lr : __mutex_lock.isra.0+0x74/0x530 [...] Process irq/32-dw_hdmi_ (pid: 124, stack limit = 0x00000000adf418cb) Call trace: osq_lock+0x54/0x188 __mutex_lock_slowpath+0x10/0x18 mutex_lock+0x30/0x38 __dw_hdmi_setup_rx_sense+0x28/0x98 dw_hdmi_setup_rx_sense+0x10/0x18 dw_hdmi_top_thread_irq+0x2c/0x50 irq_thread_fn+0x28/0x68 irq_thread+0x10c/0x1a0 kthread+0x128/0x130 ret_from_fork+0x10/0x18 Code: 34000964 d00050a2 51000484 9135c042 (f864d844) ---[ end trace 945641e1fbbc07da ]--- note: irq/32-dw_hdmi_[124] exited with preempt_count 1 genirq: exiting task "irq/32-dw_hdmi_" (124) is an active IRQ thread (irq 32) Fixes: eea034af90c6 ("drm/bridge/synopsys: dw-hdmi: don't clobber drvdata") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1527673438-20643-1-git-send-email-narmstrong@baylibre.com
2018-05-30drm/amdgpu/display: check if ppfuncs exists before using itAlex Deucher
Fixes a crash on asics without powerplay yet (e.g., vega20). Reviewed-by: Rex Zhu<rezhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-30drm/amd/pp: Connect display_clock_voltage_request to a function pointerMikita Lipski
Get rid of an empty dublicate of smu10_display_clock_voltage_request Add display_clock_voltage_request to smu10 functions struct so it can be called from outside the class and connect the pointer to the function. That way Display driver can finally apply clock voltage requests when needed. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-30drm/amdgpu: typo fix for vega20 cg flagsEvan Quan
The AMD_CG_SUPPORT_HDP_LS was wrongly written as AMD_CG_SUPPORT_BIF_LS. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-30drm/amd/powerplay: bug fixs for getsmuclockinfoEvan Quan
The .syspll_id and .dfsdid are not initialzed correctly. And le32_to_cpu transfer is needed on the output. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-30drm/amdgpu: correct SMU11 SYSPLL0 clock id valuesEvan Quan
The SMU11 SYSPLL0 clock ids were assigned wrong values. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-30drm/amdgpu: gds bo must not be per-vm-boChunming Zhou
In per-vm-bo case, there could be no bo list. But gds bo created from user space must be passed to bo list. So adding a check to prevent to creat gds bo as per-vm-bo. Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-30drm/amdgpu: To get gds, gws and oa from adev->gds (v2)Emily Deng
As now enabled per vm bo feature, the user mode driver won't supply the bo_list generally, for this case, the gdb_base, gds_size, gws_base, gws_size and oa_base, oa_size won't be set. v2: fix warning (Chunming) Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-30blk-mq: only iterate over inflight requests in blk_mq_tagset_busy_iterChristoph Hellwig
We already check for started commands in all callbacks, but we should also protect against already completed commands. Do this by taking the checks to common code. Acked-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-30nbd: clear DISCONNECT_REQUESTED flag once disconnection occurs.Kevin Vigor
When a userspace client requests a NBD device be disconnected, the DISCONNECT_REQUESTED flag is set. While this flag is set, the driver will not inform userspace when a connection is closed. Unfortunately the flag was never cleared, so once a disconnect was requested the driver would thereafter never tell userspace about a closed connection. Thus when connections failed due to timeout, no attempt to reconnect was made and eventually the device would fail. Fix by clearing the DISCONNECT_REQUESTED flag (and setting the DISCONNECTED flag) once all connections are closed. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Kevin Vigor <kvigor@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-30vhost_net: flush batched heads before trying to busy pollingJason Wang
After commit e2b3b35eb989 ("vhost_net: batch used ring update in rx"), we tend to batch updating used heads. But it doesn't flush batched heads before trying to do busy polling, this will cause vhost to wait for guest TX which waits for the used RX. Fixing by flush batched heads before busy loop. 1 byte TCP_RR performance recovers from 13107.83 to 50402.65. Fixes: e2b3b35eb989 ("vhost_net: batch used ring update in rx") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-30drivers/net: Fix various unnecessary characters after logging newlinesJoe Perches
Remove and coalesce formats when there is an unnecessary character after a logging newline. These extra characters cause logging defects. Miscellanea: o Coalesce formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-30net: davinci: fix building davinci mdio code without CONFIG_OFArnd Bergmann
Test-building this driver on targets without CONFIG_OF revealed a build failure: drivers/net/ethernet/ti/davinci_mdio.c: In function 'davinci_mdio_probe': drivers/net/ethernet/ti/davinci_mdio.c:380:9: error: implicit declaration of function 'davinci_mdio_probe_dt'; did you mean 'davinci_mdio_probe'? [-Werror=implicit-function-declaration] This adjusts the #ifdef logic in the driver to make it build in all configurations. Fixes: 2652113ff043 ("net: ethernet: ti: Allow most drivers with COMPILE_TEST") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-30net: ethernet: freescale: fix false-positive string overflow warningArnd Bergmann
While compile-testing on arm64 with gcc-8.1, I ran into a build diagnostic: drivers/net/ethernet/freescale/fec_main.c: In function 'fec_probe': drivers/net/ethernet/freescale/fec_main.c:3517:25: error: '%d' directive writing between 1 and 10 bytes into a region of size 5 [-Werror=format-overflow=] sprintf(irq_name, "int%d", i); ^~ drivers/net/ethernet/freescale/fec_main.c:3517:21: note: directive argument in the range [0, 2147483646] sprintf(irq_name, "int%d", i); ^~~~~~~ drivers/net/ethernet/freescale/fec_main.c:3517:3: note: 'sprintf' output between 5 and 14 bytes into a destination of size 8 sprintf(irq_name, "int%d", i); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ It appears this has never shown on ppc32 or arm32 for an unknown reason, but now gcc fails to identify that the 'irq_cnt' loop index has an upper bound of 3, and instead uses a bogus range. To work around the warning, this changes the sprintf to snprintf with the correct buffer length. Fixes: 78cc6e7ef957 ("net: ethernet: freescale: Allow FEC with COMPILE_TEST") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-30tpm: fix race condition in tpm_common_write()Tadeusz Struk
There is a race condition in tpm_common_write function allowing two threads on the same /dev/tpm<N>, or two different applications on the same /dev/tpmrm<N> to overwrite each other commands/responses. Fixed this by taking the priv->buffer_mutex early in the function. Also converted the priv->data_pending from atomic to a regular size_t type. There is no need for it to be atomic since it is only touched under the protection of the priv->buffer_mutex. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-05-30PCI: Enable PCI_DOMAINS along with generic PCI host controllerJan Kiszka
The generic PCI host controller is often instantiated by hypervisors, and they may add several of them or add them in addition to a physical host controller like the Jailhouse hypervisor is doing. Therefore, allow for multiple domains so that we can handle them all. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-30PCI: Add support for unbinding the generic PCI host controllerJan Kiszka
Add support for unbinding the generic PCI host controller. This is particularly useful when working in virtual environments where the controller may come and go, but possibly not only there. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Will Deacon <will.deacon@arm.com> CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-05-30PCI: Rework of_pci_get_host_bridge_resources() to ↵Jan Kiszka
devm_of_pci_get_host_bridge_resources() of_pci_get_host_bridge_resources() allocates the resource structures it fills dynamically, but none of its callers care to release them so far. Rather than requiring everyone to do this explicitly, convert the existing function to a managed version. Tested-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Acked-by: Joao Pinto <jpinto@synopsys.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-05-30PCI: Use dev_printk() in of_pci_get_host_bridge_resources()Jan Kiszka
Now that we have a device reference, make use of it for printing. Tested-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
2018-05-30PCI: Pass struct device to of_pci_get_host_bridge_resources()Jan Kiszka
Another step towards a managed version of of_pci_get_host_bridge_resources(): Feed in the underlying device, rather than just the OF node. This will allow us to use managed resource allocation internally later on. Tested-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> CC: Joao Pinto <Joao.Pinto@synopsys.com> CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-05-30PCI: Rename of_pci_get_host_bridge_resources() device node parameterJan Kiszka
We will add a "struct device *dev" parameter to this function soon, so rename the existing "struct device_node *dev" parameter to "dev_node". Tested-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
2018-05-30PCI: Fix devm_pci_alloc_host_bridge() memory leakJan Kiszka
Fix a memory leak by freeing the PCI resource list in devm_pci_release_host_bridge_dev(). Fixes: 5c3f18cce083 ("PCI: Add devm_pci_alloc_host_bridge() interface") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-31crypto: chtls - free beyond end rspq_skb_cacheAtul Gupta
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-31crypto: chtls - kbuild warningsAtul Gupta
- unindented continue - check for null page - signed return Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-31crypto: chtls - dereference null variableAtul Gupta
skb dereferenced before check in sendpage Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-31crypto: chtls - wait for memory sendmsg, sendpageAtul Gupta
address suspicious code <gustavo@embeddedor.com> 1210 set_bit(SOCK_NOSPACE, &sk->sk_socket->flags); 1211 } The issue is that in the code above, set_bit is never reached due to the 'continue' statement at line 1208. Also reported by bug report:<dan.carpenter@oracle.com> 1210 set_bit(SOCK_NOSPACE, &sk->sk_socket->flags); ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Not reachable. Its required to wait for buffer in the send path and takes care of unaddress and un-handled SOCK_NOSPACE. v2: use csk_mem_free where appropriate proper indent of goto do_nonblock replace out with do_rm_wq Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-31crypto: chtls - key len correctionAtul Gupta
corrected the key length to copy 128b key. Removed 192b and 256b key as user input supports key of size 128b in gcm_ctx Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-31crypto: ccp - Add GET_ID SEV commandJanakarajan Natarajan
The GET_ID command, added as of SEV API v0.16, allows the SEV firmware to be queried about a unique CPU ID. This unique ID can then be used to obtain the public certificate containing the Chip Endorsement Key (CEK) public key signed by the AMD SEV Signing Key (ASK). For more information please refer to "Section 5.12 GET_ID" of https://support.amd.com/TechDocs/55766_SEV-KM%20API_Specification.pdf Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-31crypto: ccp - Add DOWNLOAD_FIRMWARE SEV commandJanakarajan Natarajan
The DOWNLOAD_FIRMWARE command, added as of SEV API v0.15, allows the OS to install SEV firmware newer than the currently active SEV firmware. For the new SEV firmware to be applied it must: * Pass the validation test performed by the existing firmware. * Be of the same build or a newer build compared to the existing firmware. For more information please refer to "Section 5.11 DOWNLOAD_FIRMWARE" of https://support.amd.com/TechDocs/55766_SEV-KM%20API_Specification.pdf Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-31crypto: qat - Add MODULE_FIRMWARE for all qat driversConor McLoughlin
Signed-off-by: Conor McLoughlin <conor.mcloughlin@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-31crypto: ccree - silence debug printsGilad Ben-Yossef
The cache parameter register configuration was being too verbose. Use dev_dbg() to only provide the information if needed. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-31crypto: ccree - better clock handlingGilad Ben-Yossef
Use managed clock handling, differentiate between no clock (possibly OK) and clock init failure (never OK) and correctly handle clock detection being deferred. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-31crypto: ccree - correct host regs offsetGilad Ben-Yossef
The product signature and HW revision register have different offset on the older HW revisions. This fixes the problem of the driver failing sanity check on silicon despite working on the FPGA emulation systems. Fixes: 27b3b22dd98c ("crypto: ccree - add support for older HW revs") Cc: stable@vger.kernel.org Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-31crypto: chelsio - Remove separate buffer used for DMA map B0 block in CCMHarsh Jain
Extends memory required for IV to include B0 Block and DMA map in single operation. Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-31crypt: chelsio - Send IV as Immediate for cipher algoHarsh Jain
Send IV in WR as immediate instead of dma mapped entry for cipher. Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-31crypto: chelsio - Return -ENOSPC for transient busy indication.Harsh Jain
Change the return type based on following patch https://www.mail-archive.com/linux-crypto@vger.kernel.org/msg28552.html Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-31crypto: caam/qi - fix warning in init_cgr()Horia Geantă
Coverity warns about an "Unintentional integer overflow (OVERFLOW_BEFORE_WIDEN)" when computing the congestion threshold value. Even though it is highly unlikely for an overflow to happen, use this as an opportunity to simplify the code. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-31crypto: caam - fix rfc4543 descriptorsHoria Geantă
In some cases the CCB DMA-based internal transfer started by the MOVE command (src=M3 register, dst=descriptor buffer) does not finish in time and DECO executes the unpatched descriptor. This leads eventually to a DECO Watchdog Timer timeout error. To make sure the transfer ends, change the MOVE command to be blocking. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-31crypto: caam - fix MC firmware detectionHoria Geantă
Management Complex (MC) f/w detection is based on CTPR_MS[DPAA2] bit. This is incorrect since: -the bit is set for all CAAM blocks integrated in SoCs with a certain Layerscape Chassis -some SoCs with LS Chassis don't have an MC block (thus no MC f/w) To fix this, MC f/w detection will be based on the presence of "fsl,qoriq-mc" compatible string in the device tree. Fixes: 297b9cebd2fc0 ("crypto: caam/jr - add support for DPAA2 parts") Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit (git 2.34.1) at 2025-09-15 07:50:46 +0000