summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-09-01platform/mellanox: mlxreg-lc: Fix locking issueVadim Pasternak
Fix locking issues: - mlxreg_lc_state_update() takes a lock when set or clear "MLXREG_LC_POWERED". - All the devices can be deleted before MLXREG_LC_POWERED flag is cleared. To fix it: - Add lock() / unlock() at the beginning / end of mlxreg_lc_event_handler() and remove locking from mlxreg_lc_power_on_off() and mlxreg_lc_enable_disable() - Add locked version of mlxreg_lc_state_update() - mlxreg_lc_state_update_locked() for using outside mlxreg_lc_event_handler(). (2) Remove redundant NULL check for of if 'data->notifier'. Fixes: 62f9529b8d5c87b ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20220823201937.46855-3-vadimp@nvidia.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-09-01platform/mellanox: mlxreg-lc: Fix coverity warningVadim Pasternak
Fix smatch warning: drivers/platform/mellanox/mlxreg-lc.c:866 mlxreg_lc_probe() warn: passing zero to 'PTR_ERR' by removing 'err = PTR_ERR(regmap)'. Fixes: b4b830a34d80 ("platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20220823201937.46855-2-vadimp@nvidia.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-09-01platform/x86: acer-wmi: Acer Aspire One AOD270/Packard Bell Dot keymap fixesHans de Goede
2 keymap fixes for the Acer Aspire One AOD270 and the same hardware rebranded as Packard Bell Dot SC: 1. The F2 key is marked with a big '?' symbol on the Packard Bell Dot SC, this sends WMID_HOTKEY_EVENTs with a scancode of 0x27 add a mapping for this. 2. Scancode 0x61 is KEY_SWITCHVIDEOMODE. Usually this is a duplicate input event with the "Video Bus" input device events. But on these devices the "Video Bus" does not send events for this key. Map 0x61 to KEY_UNKNOWN instead of using KE_IGNORE so that udev/hwdb can override it on these devs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220829163544.5288-1-hdegoede@redhat.com
2022-09-01perf/arm_pmu_platform: fix tests for platform_get_irq() failureYu Zhe
The platform_get_irq() returns negative error codes. It can't actually return zero. Signed-off-by: Yu Zhe <yuzhe@nfschina.com> Link: https://lore.kernel.org/r/20220825011844.8536-1-yuzhe@nfschina.com Signed-off-by: Will Deacon <will@kernel.org>
2022-09-01Merge tag 'usb-serial-6.0-rc4' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: "USB-serial fixes for 6.0-rc4 Here are a couple of fixes for two long-standing issues with some older ch341 devices and a number of new device ids. All have been in linux-next with no reported issues." * tag 'usb-serial-6.0-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: ch341: fix disabled rx timer on older devices USB: serial: ch341: fix lost character on LCR updates USB: serial: cp210x: add Decagon UCA device id USB: serial: option: add support for Cinterion MV32-WA/WB RmNet mode USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id USB: serial: option: add Quectel EM060K modem USB: serial: option: add support for OPPO R11 diag port
2022-09-01soundwire: qcom: fix device status array rangeSrinivas Kandagatla
This patch updates device status array range from 11 to 12 as we will be reading status from device number 0 to device number 11 inclusive. Without this patch we can potentially access status array out of range during auto-enumeration. Fixes: aa1262ca6695 ("soundwire: qcom: Check device status before reading devid") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220708104747.8722-1-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-01Merge tag 'drm-intel-fixes-2022-08-26' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - GVT fixes including fix for a CommetLake regression in mmio table and misc doc and typo fixes - Fix CCS handling (Matt) - Fix for guc requests after reset (Daniele) - Display DSI related fixes (Jani) - Display backlight related fixes (Arun, Jouni) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YwjCTDFm7clXPgEu@intel.com
2022-08-31drm/amd/amdgpu: skip ucode loading if ucode_size == 0Chengming Gui
Restrict the ucode loading check to avoid frontdoor loading error. Signed-off-by: Chengming Gui <Jack.Gui@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-31mlxbf_gige: compute MDIO period based on i1clkDavid Thompson
This patch adds logic to compute the MDIO period based on the i1clk, and thereafter write the MDIO period into the YU MDIO config register. The i1clk resource from the ACPI table is used to provide addressing to YU bootrecord PLL registers. The values in these registers are used to compute MDIO period. If the i1clk resource is not present in the ACPI table, then the current default hardcorded value of 430Mhz is used. The i1clk clock value of 430MHz is only accurate for boards with BF2 mid bin and main bin SoCs. The BF2 high bin SoCs have i1clk = 500MHz, but can support a slower MDIO period. Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver") Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/20220826155916.12491-1-davthompson@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31Revert "clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops"Stephen Boyd
This reverts commit 35b0fac808b95eea1212f8860baf6ad25b88b087. Alexander reports that it causes boot failures on i.MX8M Plus based boards (specifically imx8mp-tqma8mpql-mba8mpxl.dts). Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: Chen-Yu Tsai <wenst@chromium.org> Fixes: 35b0fac808b9 ("clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops") Link: https://lore.kernel.org/r/12115951.O9o76ZdvQC@steina-w Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220831175326.2523912-1-sboyd@kernel.org
2022-08-31Merge tag 'for-linus-2022083101' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - NULL pointer dereference fix for Steam driver (Lee Jones) - memory leak fix for hidraw (Karthik Alapati) - regression fix for functionality of some UCLogic tables (Benjamin Tissoires) - a few new device IDs and device-specific quirks * tag 'for-linus-2022083101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: nintendo: fix rumble worker null pointer deref HID: intel-ish-hid: ipc: Add Meteor Lake PCI device ID HID: input: fix uclogic tablets HID: Add Apple Touchbar on T2 Macs in hid_have_special_driver list HID: add Lenovo Yoga C630 battery quirk HID: AMD_SFH: Add a DMI quirk entry for Chromebooks HID: thrustmaster: Add sparco wheel and fix array length hid: intel-ish-hid: ishtp: Fix ishtp client sending disordered message HID: ishtp-hid-clientHID: ishtp-hid-client: Fix comment typo HID: asus: ROG NKey: Ignore portion of 0x5a report HID: hidraw: fix memory leak in hidraw_release() HID: steam: Prevent NULL pointer dereference in steam_{recv,send}_report
2022-08-31Merge tag 'lsm-pr-20220829' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm Pull LSM support for IORING_OP_URING_CMD from Paul Moore: "Add SELinux and Smack controls to the io_uring IORING_OP_URING_CMD. These are necessary as without them the IORING_OP_URING_CMD remains outside the purview of the LSMs (Luis' LSM patch, Casey's Smack patch, and my SELinux patch). They have been discussed at length with the io_uring folks, and Jens has given his thumbs-up on the relevant patches (see the commit descriptions). There is one patch that is not strictly necessary, but it makes testing much easier and is very trivial: the /dev/null IORING_OP_URING_CMD patch." * tag 'lsm-pr-20220829' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: Smack: Provide read control for io_uring_cmd /dev/null: add IORING_OP_URING_CMD support selinux: implement the security_uring_cmd() LSM hook lsm,io_uring: add LSM hooks for the new uring_cmd file op
2022-08-31gpio: realtek-otto: switch to 32-bit I/OSander Vanheule
By using 16-bit I/O on the GPIO peripheral, which is apparently not safe on MIPS, the IMR can end up containing garbage. This then results in interrupt triggers for lines that don't have an interrupt handler associated. The irq_desc lookup fails, and the ISR will not be cleared, keeping the CPU busy until reboot, or until another IMR operation restores the correct value. This situation appears to happen very rarely, for < 0.5% of IMR writes. Instead of using 8-bit or 16-bit I/O operations on the 32-bit memory mapped peripheral registers, switch to using 32-bit I/O only, operating on the entire bank for all single bit line settings. For 2-bit line settings, with 16-bit port values, stick to manual (un)packing. This issue has been seen on RTL8382M (HPE 1920-16G), RTL8391M (Netgear GS728TP v2), and RTL8393M (D-Link DGS-1210-52 F3, Zyxel GS1900-48). Reported-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> # DGS-1210-52 Reported-by: Birger Koblitz <mail@birger-koblitz.de> # GS728TP Reported-by: Jan Hoffmann <jan@3e8.eu> # 1920-16G Fixes: 0d82fb1127fb ("gpio: Add Realtek Otto GPIO support") Signed-off-by: Sander Vanheule <sander@svanheule.net> Cc: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-08-31USB: serial: ch341: fix disabled rx timer on older devicesJohan Hovold
At least one older CH341 appears to have the RX timer enable bit inverted so that setting it disables the RX timer and prevents the FIFO from emptying until it is full. Only set the RX timer enable bit for devices with version newer than 0x27 (even though this probably affects all pre-0x30 devices). Reported-by: Jonathan Woithe <jwoithe@just42.net> Tested-by: Jonathan Woithe <jwoithe@just42.net> Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Cc: stable@vger.kernel.org # 4.10 Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-31USB: serial: ch341: fix lost character on LCR updatesJohan Hovold
Disable LCR updates for pre-0x30 devices which use a different (unknown) protocol for line control and where the current register write causes the next received character to be lost. Note that updating LCR using the INIT command has no effect on these devices either. Reported-by: Jonathan Woithe <jwoithe@just42.net> Tested-by: Jonathan Woithe <jwoithe@just42.net> Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Fixes: 55fa15b5987d ("USB: serial: ch341: fix baud rate and line-control handling") Cc: stable@vger.kernel.org # 4.10 Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-31ethernet: rocker: fix sleep in atomic context bug in neigh_timer_handlerDuoming Zhou
The function neigh_timer_handler() is a timer handler that runs in an atomic context. When used by rocker, neigh_timer_handler() calls "kzalloc(.., GFP_KERNEL)" that may sleep. As a result, the sleep in atomic context bug will happen. One of the processes is shown below: ofdpa_fib4_add() ... neigh_add_timer() (wait a timer) neigh_timer_handler() neigh_release() neigh_destroy() rocker_port_neigh_destroy() rocker_world_port_neigh_destroy() ofdpa_port_neigh_destroy() ofdpa_port_ipv4_neigh() kzalloc(sizeof(.., GFP_KERNEL) //may sleep This patch changes the gfp_t parameter of kzalloc() from GFP_KERNEL to GFP_ATOMIC in order to mitigate the bug. Fixes: 00fc0c51e35b ("rocker: Change world_ops API and implementation to be switchdev independant") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31USB: serial: cp210x: add Decagon UCA device idJohan Hovold
Add the device id for Decagon Devices USB Cable Adapter. Link: https://lore.kernel.org/r/trinity-819f9db2-d3e1-40e9-a669-9c245817c046-1661523546680@msvc-mesg-web108 Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2022-08-31gpio: pca953x: Add mutex_lock for regcache sync in PMHaibo Chen
The regcache sync will set the cache_bypass = true, at that time, when there is regmap write operation, it will bypass the regmap cache, then the regcache sync will write back the value from cache to register, which is not as our expectation. Though regmap already use its internal lock to avoid such issue, but this driver force disable the regmap internal lock in its regmap config: disable_locking = true To avoid this issue, use the driver's own lock to do the protect in system PM. Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-08-31Revert "usb: add quirks for Lenovo OneLink+ Dock"Greg Kroah-Hartman
This reverts commit 3d5f70949f1b1168fbb17d06eb5c57e984c56c58. The quirk does not work properly, more work is needed to determine what should be done here. Reported-by: Oliver Neukum <oneukum@suse.com> Cc: Jean-Francois Le Fillatre <jflf_kernel@gmx.com> Cc: stable <stable@kernel.org> Fixes: 3d5f70949f1b ("usb: add quirks for Lenovo OneLink+ Dock") Link: https://lore.kernel.org/r/9a17ea86-079f-510d-e919-01bc53a6d09f@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30net: lan966x: improve error handle in lan966x_fdma_rx_get_frame()Dan Carpenter
Don't just print a warning. Clean up and return an error as well. Fixes: c8349639324a ("net: lan966x: Add FDMA functionality") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/YwjgDm/SVd5c1tQU@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-30nfp: fix the access to management firmware hangingGao Xiao
When running `ethtool -p` with the old management firmware, the management firmware resource is not correctly released, which causes firmware related malfunction: all the access to management firmware hangs. It releases the management firmware resource when set id mode operation is not supported. Fixes: ccb9bc1dfa44 ("nfp: add 'ethtool --identify' support") Signed-off-by: Gao Xiao <gao.xiao@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20220829101651.633840-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-30Merge tag 'ieee802154-for-net-2022-08-29' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== ieee802154 for net 2022-08-29 - repeated word fix from Jilin Yuan. - missed return code setting in the cc2520 driver by Li Qiong. - fixing a potential race in by defering the workqueue destroy in the adf7242 driver by Lin Ma. - fixing a long standing problem in the mac802154 rx path to match corretcly by Miquel Raynal. * tag 'ieee802154-for-net-2022-08-29' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan: ieee802154: cc2520: add rc code in cc2520_tx() net: mac802154: Fix a condition in the receive path net/ieee802154: fix repeated words in comments ieee802154/adf7242: defer destroy_workqueue call ==================== Link: https://lore.kernel.org/r/20220829100308.2802578-1-stefan@datenfreihafen.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-30net: phy: micrel: Make the GPIO to be non-exclusiveHoratiu Vultur
The same GPIO line can be shared by multiple phys for the coma mode pin. If that is the case then, all the other phys that share the same line will failed to be probed because the access to the gpio line is not non-exclusive. Fix this by making access to the gpio line to be nonexclusive using flag GPIOD_FLAGS_BIT_NONEXCLUSIVE. This allows all the other PHYs to be probed. Fixes: 738871b09250ee ("net: phy: micrel: add coma mode GPIO") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220830064055.2340403-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31nvmet-tcp: fix unhandled tcp states in nvmet_tcp_state_change()Maurizio Lombardi
TCP_FIN_WAIT2 and TCP_LAST_ACK were not handled, the connection is closing so we can ignore them and avoid printing the "unhandled state" warning message. [ 1298.852386] nvmet_tcp: queue 2 unhandled state 5 [ 1298.879112] nvmet_tcp: queue 7 unhandled state 5 [ 1298.884253] nvmet_tcp: queue 8 unhandled state 5 [ 1298.889475] nvmet_tcp: queue 9 unhandled state 5 v2: Do not call nvmet_tcp_schedule_release_queue(), just ignore the fin_wait2 and last_ack states. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-08-31nvmet-auth: add missing goto in nvmet_setup_auth()Hannes Reinecke
There's a goto missing in nvmet_setup_auth(), causing a kernel oops when nvme_auth_extract_key() fails. Reported-by: Tal Lossos <tallossos@gmail.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-08-31nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM610Shyamin Ayesh
Lexar NM610 reports bogus eui64 values that appear to be the same across all drives. Quirk them out so they are not marked as "non globally unique" duplicates. Signed-off-by: Shyamin Ayesh <me@shyamin.com> [patch formatting] Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-08-30drm/amdgpu: only init tap_delay ucode when it's included in ucode binaryHawking Zhang
Not all the gfx10 variants need to integrate global tap_delay and per se tap_delay firmwares Only init tap_delay ucode when it does include in rlc ucode binary so driver doesn't send a null buffer to psp for firmware loading Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Fix black flash when switching from ODM2to1 to ODMBypassVladimir Stempen
[Why] On secondary display hotplug we switch primary stream from ODM2to1 to ODMBypass mode. Current logic will trigger disabling front end for this stream. [How] We need to check if prev_odm_pipe is equal to NULL in order to disable dangling planes in this scenario. Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Fix check for stream and planeEthan Wellenreiter
[WHY] Function wasn't returning false when it had a no stream [HOW] Made it return false when it had no stream. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Ethan Wellenreiter <Ethan.Wellenreiter@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Re-initialize viewport after pipe mergeEthan Wellenreiter
[Why] Pipes get merged in preparation for SubVP but if they don't get used, and are in ODM or some other multi pipe config, it would calculate the voltage level with a viewport of just one pipe from when they were split resulting in too low of a voltage level. [How] Made it so that the viewport and other timing settings get rebuilt and re- initialized after the pipe merge, before calculating the voltage level so it would calculate it correctly. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Ethan Wellenreiter <Ethan.Wellenreiter@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Use correct plane for CAB cursor size allocationAurabindo Pillai
[Why&How] plane and stream variables used for cursor size allocation calculation were stale from previous iteration. Redo the iteration to find the correct cursor plane for the calculation. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: ensure no PCIe peer access for CPU XGMI iolinksAlex Sierra
[Why] Devices with CPU XGMI iolink do not support PCIe peer access. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/pm: bump SMU 13.0.0 driver_if header versionEvan Quan
To suppress the warning about version mismatch with the latest 78.54.0 PMFW. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/pm: use vbios carried pptable for all SMU13.0.7 SKUsEvan Quan
For those SMU13.0.7 unsecure SKUs, the vbios carried pptable is ready to go. Use that one instead of hardcoded softpptable. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/pm: use vbios carried pptable for those supported SKUsEvan Quan
For some SMU13.0.0 SKUs, the vbios carried pptable is ready to go. Use that one instead of hardcoded softpptable. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: fix wrong register accessCharlene Liu
[why] fw version check was for release branch. for staging, it has a chance to enter wrong code path. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: use actual cursor size instead of max for CAB allocationAurabindo Pillai
[Why&How] When calculating allocation for cursor size, get the real cursor through the HUBP instead of using the maximum cursor size for more optimal allocation Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: disable display fresh from MALL on an edge case for DCN321Aurabindo Pillai
[Why&How] When using a 4k monitor when cursor caching is not supported due to framebuffer being on an uncacheable address, enabling display refresh from MALL would trigger corruption if SS is enabled. Prevent entering SS if we are on the edge case and cursor caching is not possible. Do this only if cursor size larger than a 64x64@4bpp. Pull the cursor size calculation out of if condition since cursor address may not be set on all platforms Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Fix CAB cursor size allocation for DCN32/321Aurabindo Pillai
For calculating cursor size allocation, surface size was used, resulting in over allocation Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Missing HPO instance addedLeo Chen
[Why & How] Number of encoder is set to 4 but only 3 instances are created. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: set dig fifo read start level to 7 before dig fifo resetWang Fudong
[Why] DIG_FIFO_ERROR = 1 caused mst daisy chain 2nd monitor black. [How] We need to set dig fifo read start level = 7 before dig fifo reset during dig fifo enable according to hardware designer's suggestion. If it is zero, it will cause underflow or overflow and DIG_FIFO_ERROR = 1. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Wang Fudong <Fudong.Wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: Fix use-after-free in amdgpu_cs_ioctlYuBiao Wang
[Why] In amdgpu_cs_ioctl, amdgpu_job_free could be performed ealier if there is -ERESTARTSYS error. In this case, job->hw_fence could be not initialized yet. Putting hw_fence during amdgpu_job_free could lead to a use-after-free warning. [How] Check if drm_sched_job_init is performed before job_free by checking s_fence. v2: Check hw_fence.ops instead since it could be NULL if fence is not initialized. Reverse the condition since !=NULL check is discouraged in kernel. Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Fix OTG H timing reset for dcn314Duncan Ma
[Why] When ODM is enabled, H timing control register reset to 0. Div mode manual field get overwritten causing no display on certain modes for dcn314. [How] Use REG_UPDATE instead of REG_SET to set div_mode field. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Duncan Ma <duncan.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programmingGeorge Shen
[Why] Each index in the DPSTREAMCLK_CNTL register phyiscally maps 1-to-1 with HPO stream encoder instance. On the other hand, each index in DTBCLK_P_CNTL physically maps 1-to-1 with OTG instance. Current DCN32 DPSTREAMCLK_CLK programing assumes that OTG instance always maps 1-to-1 with HPO stream encoder instance. This is not always guaranteed and can result in blackscreen. [How] Program the correct dpstreamclk instance with the correct dtbclk_p source. Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: Update mes_v11_api_def.hGraham Sider
New GFX11 MES FW adds the trap_en bit. For now hardcode to 1 (traps enabled). Signed-off-by: Graham Sider <Graham.Sider@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: disable FRU access on special SIENNA CICHLID cardGuchun Chen
Below driver load error will be printed, not friendly to end user. amdgpu: ATOM BIOS: 113-D603GLXE-077 [drm] FRU: Failed to get size field [drm:amdgpu_fru_get_product_info [amdgpu]] *ERROR* Failed to read FRU Manufacturer, ret:-5 Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30staging: rtl8712: fix use after free bugsDan Carpenter
_Read/Write_MACREG callbacks are NULL so the read/write_macreg_hdl() functions don't do anything except free the "pcmd" pointer. It results in a use after free. Delete them. Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel") Cc: stable <stable@kernel.org> Reported-by: Zheng Wang <hackerzheng666@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/Yw4ASqkYcUhUfoY2@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30Merge tag 'mhi-fixes-for-v6.0' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-linus Manivannan writes: "A single fix targeting the MHI host stack: - Since the commit 1227d2a20cd7 ("bus: mhi: host: Move IRQ allocation to controller registration phase"), the MHI context gets freed during mhi_unregister_controller(). But when the MHI IRQs are shared, the IRQ handler may get invoked during __free_irq() if CONFIG_DEBUG_SHIRQ is set. In that case, there will be a null pointer dereference because of trying to use the freed context struct. So for fixing the issue, let's check for the existence of the context struct at the start of the handler before handling the IRQ." * tag 'mhi-fixes-for-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi: bus: mhi: host: Fix up null pointer access in mhi_irq_handler
2022-08-30Merge tag 'peci-fixes-6.0' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/iwi/linux into char-misc-linus Iwona writes: "PECI fixes for v6.0 Two minor fixes: * cpu - Fix use-after-free in adev_release() * aspeed - Fix error check for platform_get_irq()" * tag 'peci-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/iwi/linux: peci: cpu: Fix use-after-free in adev_release() peci: aspeed: fix error check return value of platform_get_irq()
2022-08-30usb: cdns3: fix issue with rearming ISO OUT endpointPawel Laszczak
ISO OUT endpoint is enabled during queuing first usb request in transfer ring and disabled when TRBERR is reported by controller. After TRBERR and before next transfer added to TR driver must again reenable endpoint but does not. To solve this issue during processing TRBERR event driver must set the flag EP_UPDATE_EP_TRBADDR in priv_ep->flags field. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20220825062137.5766-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-18 21:27:24 +0000