summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-02-11DM9000: Remove old timer based poll routinesBen Dooks
Remove the timer based MII phy polling, as this is currently broken with the new EEPROM code that now uses mutexes to protect the phy access. This will need to be replaced in the future by some form of mutex safe mechanism for reading the MII phy status. The replacement has not been done here as changing this patch, which is early in the sequence has quite a knock-on effect. Once this series is merged, then a new presentation of an patch to poll the MII link status can be added. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Pass IRQ flags via platform resourcesBen Dooks
Use the flags in the IRQ resource to specify the type of IRQ being requested, so that systems which do not have level-based interrupts, or change the interrupt in some other way can specify this without making an #ifdef mess in the driver. This is specifically designed to undo the change in commit 4e4fc05a2b6e7bd2e0facd96e0c18dceb34d9349 which hardwires the type for everyone but blackfin to IRQT_RISING, which breaks all a number of Simtec boards which use (and setup in the bootloader) active low IRQs. Note, although there where originally objections due to the use of IORESOURCE_IRQ and IRQT_ flags not sharing the same definition, at least <include/linux/interrupt.h> notes these are the same. Signed-off-by: Ben Dooks <ben-linux@fluff.org> CC: Daniel Mack <daniel@caiaq.de> CC: Bryan Wu <bryan.wu@analog.com> CC: Alex Landau <landau.alex@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000 update debugging macros to use debug levelBen Dooks
Change the debug macros to use the compiler to elide any unnecessary debug level, and to allow device configurable debug control. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000 use dev_xxx() instead of printk for output.Ben Dooks
Move to using dev_dbg() and friends for the output of information to the user. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Add platform data to specify external phyBen Dooks
Patch from: Laurent Pinchart <laurentp@cse-semaphore.com> This patch adds a flag to the DM9000 platform data which, when set, configures the device to use an external PHY. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Ben Dooks <ben-linuy@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11DM9000: Fix endian-ness of data accesses.Ben Dooks
Patch from: Laurent Pinchart <laurentp@cse-semaphore.com> This patch splits the receive status in 8bit wide fields and convert the packet length from little endian to CPU byte order. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11Optimize cxgb3 xmit path (a bit)Krishna Kumar
1. Add common code for stopping queue. 2. No need to call netif_stop_queue followed by netif_wake_queue (and infact a netif_start_queue could have been used instead), instead call stop_queue if required, and remove code under USE_GTS macro. 3. There is no need to check for netif_queue_stopped, as the network core guarantees that for us (I am sure every driver could remove that check, eg e1000 - I have tested that path a few billion times with about a few hundred thousand qstops but the condition never hit even once). Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11e1000: Fix for 32 bits platforms with 64 bits resourcesBenjamin Herrenschmidt
The e1000 driver stores the content of the PCI resources into unsigned long's before ioremapping. This breaks on 32 bits platforms that support 64 bits MMIO resources such as ppc 44x. This fixes it by removing those temporary variables and passing directly the result of pci_resource_start/len to ioremap. The side effect is that I removed the assignments to the netdev fields mem_start, mem_end and base_addr, which are totally useless for PCI devices. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> -- drivers/net/e1000/e1000_main.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11PS3: gelic: Add wireless support for PS3Masakazu Mokuno
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Acked-by: Dan Williams <dcbw@redhat.com> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11PS3: gelic: Add support for dual network interfaceMasakazu Mokuno
Add support for dual network (net_device) interface so that ethernet and wireless can own separate ethX interfaces. V2 - Fix the bug that bringing down and up the interface keeps rx disabled. - Make 'gelic_net_poll_controller()' extern , as David Woodhouse pointed out at the previous submission. - Fix weird usage of member names for the rx descriptor chain V1 - Export functions which are convenient for both interfaces - Move irq allocation/release code to driver probe/remove handlers because interfaces share interrupts. - Allocate skbs by using dev_alloc_skb() instead of netdev_alloc_skb() as the interfaces share the hardware rx queue. - Add gelic_port struct in order to abstract dual interface handling - Change handlers for hardware queues so that they can handle dual {source,destination} interfaces. - Use new NAPI functions This is a prerequisite for the new PS3 wireless support. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11PS3: gelic: add support for port link statusMasakazu Mokuno
Add support for interrupt driven port link status detection. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11PS3: gelic: remove duplicated ethtool handlersMasakazu Mokuno
Remove some ethtool handlers, which duplicate functionality that was already provided by the common ethtool handlers. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11PS3: gelic: code cleanupMasakazu Mokuno
Code cleanup: - Use appropriate prefixes for names instead of fixed 'gelic_net' so that objects of the functions, variables and constants can be estimated. - Remove definitions for IPSec offload to the gelic hardware. This functionality is never supported on PS3. - Group constants with enum. - Use bitwise constants for interrupt status, instead of bit numbers to eliminate shift operations. - Style fixes. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11PS3: gelic: Add endianness macrosMasakazu Mokuno
Mark the members of the structure for DMA descriptors with proper endian annotations and use the appropriate accessor macros. As the gelic driver works only on PS3, all these macros will be expanded to null. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11PS3: gelic: Fix the wrong dev_id passedMasakazu Mokuno
The device id for lv1_net_set_interrupt_status_indicator() is wrong. This path would be invoked only in the case of an initialization failure. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-118139too fix for DreamcastAdrian McMenamin
Updates the 8139too driver to work with recently added (a724605cb7a66d423a494a395f9a8ba871b8a1eb) declared coherent memory patch for the Dreamcast. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11ni52: Remove 278 scripts/checkpatch errorsAlan Cox
To kill the volatiles also switch it to stop poking ISA memory directly without going through readb and friends. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11pcnet32: Use print_macDon Fry
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Don Fry <pcnet32@verizon.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11pcnet32: use NET_IP_ALIGN instead of 2Don Fry
Change hard coded 2 to NET_IP_ALIGN. Added new #define with comments. Tested amd_64 Signed-off-by: Don Fry <pcnet32@verizon.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11HID: add LCSPEC from VERNIER to quirk listJiri Kosina
We need to blacklist this device, as it should be handled by ldusb driver. Reported-by: stephen <stephen.ware@eqware.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-02-11HID: fix processing of event quirksJiri Kosina
The old code (before move) stopped further processing of the event after it has been already processed by the quirk handler. The new code didn't propagate the return value properly, and therefore the processing always proceeded, which was wrong. This patch fixes it. Pointed out in kernel.org bugzilla #9842 Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-02-11HID: Blacklist new GTCO CalComp USB device PIDsJeremy Roberson
Adds new GTCO CalComp USB device PIDs to the blacklist. Signed-off-by: Jeremy A. Roberson <jroberson@gtcocalcomp.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-02-11ide: remove stale comment from ide-lib.cBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide: fix comment in init_irq()Bartlomiej Zolnierkiewicz
APUS support is gone... Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide: ide_init_port() bugfixBartlomiej Zolnierkiewicz
On Sunday 10 February 2008, Atsushi Nemoto wrote: > On Sun, 06 Jan 2008 18:03:10 +0100, Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> wrote: > > + /* reset DMA masks only for SFF-style DMA controllers */ > > + if ((d->host_flags && IDE_HFLAG_NO_DMA) == 0 && hwif->dma_base == 0) > > + hwif->swdma_mask = hwif->mwdma_mask = hwif->ultra_mask = 0; > > It might be too late, but "host_flags && IDE_HFLAGS_NO_DMA" seems > wrong for me. Fix regression caused by commmit c413b9b94d9a8e7548cc4b2e04b7df0439ce76fd ("ide: add struct ide_port_info instances to legacy host drivers"). Reported-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide-disk: fix flush requests (take 2)Bartlomiej Zolnierkiewicz
commit 813a0eb233ee67d7166241a8b389b6a76f2247f9 Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Date: Fri Jan 25 22:17:10 2008 +0100 ide: switch idedisk_prepare_flush() to use REQ_TYPE_ATA_TASKFILE requests ... broke flush requests. Allocating IDE command structure on the stack for flush requests is not a very brilliant idea: - idedisk_prepare_flush() only prepares the request and it doesn't wait for it to be completed - there are can be multiple flush requests queued in the queue Fix the problem (per hints from James Bottomley) by: - dynamically allocating ide_task_t instance using kmalloc(..., GFP_ATOMIC) - adding new taskfile flag (IDE_TFLAG_DYN) - calling kfree() in ide_end_drive_command() if IDE_TFLAG_DYN is set (while at it rename 'args' to 'task' and fix whitespace damage) [ This will be fixed properly before 2.6.25 but this bug is rather critical and the proper solution requires some more work + testing. ] Thanks to Sebastian Siewior and Christoph Hellwig for reporting the problem and testing patches (extra thanks to Sebastian for bisecting it to the guilty commmit). Tested-by: Sebastian Siewior <ide-bug@ml.breakpoint.cc> Cc: Christoph Hellwig <hch@infradead.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Tejun Heo <htejun@gmail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide: introduce CONFIG_BLK_DEV_IDEDMA_SFF optionSergei Shtylyov
Introduce new option CONFIG_BLK_DEV_IDEDMA_SFF for non-PCI SFF-8038i compatible bus mastering IDE controllers (which there are a few known), thus fixing a hack made for Palmchip BK3710 controller... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Anton Salnikov <asalnikov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11bast-ide: build fixBartlomiej Zolnierkiewicz
On Saturday 09 February 2008, Adrian Bunk wrote: > Commit 9e016a719209d95338e314b46c3012cc7feaaeec causes the following > compile error: > > <-- snip --> > > ... > CC drivers/ide/arm/bast-ide.o > /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/arm/bast-ide.c: In function 'bastide_register': > /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/arm/bast-ide.c:31: error: 'hwif' redeclared as different kind of symbol > /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/arm/bast-ide.c:29: error: previous definition of 'hwif' was here > make[4]: *** [drivers/ide/arm/bast-ide.o] Error 1 > > <-- snip --> Remove 'ide_hwif_t **hwif' argument from bastide_register() (together with write-only ifs[]). Cc: Adrian Bunk <bunk@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide-tape: remove never executed codeBartlomiej Zolnierkiewicz
rq->cmd[0] is never set to REQ_IDETAPE_READ_BUFFER so remove REQ_IDETAPE_READ_BUFFER handling from idetape_create_write_cmd() and the define itself. Then remove no longer used idetape_create_read_buffer_cmd() and IDETAPE_RETRIEVE_FAULTY_BLOCK define. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide: fix ide/legacy/gayle.c compilationAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide-cd: replace ntohs with generic byteorder macro be16_to_cpuBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide: remove stale version numberBartlomiej Zolnierkiewicz
On Thursday 03 January 2008, Robert Hancock wrote: [...] > How about getting rid of this stupid thing in drivers/ide/ide.c: > > #define       REVISION        "Revision: 7.00alpha2" > > which is used in: > > printk(KERN_INFO "Uniform Multi-Platform E-IDE driver " REVISION "\n"); > > It's been 7.00alpha2 for god knows how long, so clearly this version > number is not useful.. Cc: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11pdc202xx_old: always enable burst modeBartlomiej Zolnierkiewicz
Alan has noticed that distros always enabled burst mode (+ datasheet confirms that it is the right thing to do). Thus fix pdc202xx_old host driver to do it unconditionally and remove no longer needed CONFIG_PDC202XX_BURST option. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11palm_bk3710: use struct ide_port_infoBartlomiej Zolnierkiewicz
* Factor out cable detection to palm_bk3710_cable_detect(). * Add palm_bk3710_init_hwif() (->init_hwif method implementation). * Remove needless ->quirkproc initialization. * Add missing ->pio_mask initialization. * Use ATA_* defines for setting ->{ultra,mwdma}_mask. * Add 'struct ide_port_info palm_bk3710_port_info' and pass it to ide_device_add(). Then remove open-coded 'hwif' initialization. Cc: Anton Salnikov <asalnikov@ru.mvista.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11palm_bk3710: port initialization/probing bugfixBartlomiej Zolnierkiewicz
Probe port _after_ it is fully initialized. Cc: Anton Salnikov <asalnikov@ru.mvista.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11palm_bk3710: fix ide_unregister() usageBartlomiej Zolnierkiewicz
Don't set 'restore' flag for ide_unregister() when initializing new interface. [ identical change as done to bast-ide/ide-cs/delkin_cb host drivers by commit 909f4369bca30f9a186316a3bf2b4a9c1e702a25 ] Cc: Anton Salnikov <asalnikov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11palm_bk3710: ide_register_hw() -> ide_device_add()Bartlomiej Zolnierkiewicz
* Convert palm_bk3710 host driver to use ide_device_add() instead of ide_register_hw() (while at it drop doing "ide_unregister()" loop which tries to unregister _all_ IDE interfaces if useable ide_hwifs[] slot cannot be find). [ identical change as done to bast-ide/ide-cs/delkin_cb host drivers by commit 9e016a719209d95338e314b46c3012cc7feaaeec ] * Rename 'ide_ctlr_info' to 'hw' and 'index' to 'i' while at it. Cc: Anton Salnikov <asalnikov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide: insert BUG_ON() into __ide_set_handler() (take 2)Sergei Shtylyov
Replace the check for hwgroup->handler and printk(KERN_CRIT, ...) at the start of __ide_set_handler() with mere BUG_ON() while removing such from the caller, ide_execute_command(). Fix up the code formatting, while at it... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11cs5520: remove stale commentBenjamin Herrenschmidt
Remove stale comment from the cs5520 IDE driver. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide: another possible ide panic fix for blk-end-requestKiyoshi Ueda
I have reviewed all blk-end-request patches again to confirm whether there are any similar problems with the last week's ide-cd panic: http://lkml.org/lkml/2008/1/29/140 And I found a possible similar bug in ide-io change: ide_end_drive_cmd() could be called for blk_pc_request() which could have bios. To complete such requests correctly, we need to pass the actual size of the request. Otherwise, __blk_end_request() returns 1 because the request still has bios, and the system will BUG() unnecessarily. The following patch fixes the bug and should be applied on top of Linus' git. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-10Change pci_raw_ops to pci_raw_read/writeMatthew Wilcox
We want to allow different implementations of pci_raw_ops for standard and extended config space on x86. Rather than clutter generic code with knowledge of this, we make pci_raw_ops private to x86 and use it to implement the new raw interface -- raw_pci_read() and raw_pci_write(). Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (28 commits) [NET_SCHED] sch_htb: htb_requeue fix [IPV6]: Replace using the magic constant "1024" with IP6_RT_PRIO_USER for fc_metric. starfire: secton fix via-velocity: section fix natsemi: section fix typhoon: section fix isdn: fix section mismatch warning for ISACVer isdn: fix section mismatch warnings from hisax_cs_setup_card isdn: fix section mismatch warnings in isac.c and isar.c isdn: fix section mismatch warning in hfc_sx.c [PKT_SCHED] ematch: tcf_em_destroy robustness [PKT_SCHED]: deinline functions in meta match [SCTP]: Convert sctp_dbg_objcnt to seq files. [SCTP]: Use snmp_fold_field instead of a homebrew analogue. [IGMP]: Optimize kfree_skb in igmp_rcv. [KEY]: Convert net/pfkey to use seq files. [KEY]: Clean up proc files creation a bit. pppol2tp: fix printk warnings bnx2: section fix bnx2x: section fix ...
2008-02-09starfire: secton fixAndrew Morton
gcc-3.4.4 on powerpc: drivers/net/starfire.c:219: error: version causes a section type conflict Cc: Jeff Garzik <jeff@garzik.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-09via-velocity: section fixAndrew Morton
From: Andrew Morton <akpm@linux-foundation.org> gcc-3.4.4 on powerpc: drivers/net/via-velocity.c:443: error: chip_info_table causes a section type conflict on this one I had to remove the __devinitdata too. Don't know why. Cc: Jeff Garzik <jeff@garzik.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-09natsemi: section fixAndrew Morton
gcc-3.4.4 on powerpc: drivers/net/natsemi.c:245: error: natsemi_pci_info causes a section type conflict Cc: Jeff Garzik <jeff@garzik.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-09typhoon: section fixAndrew Morton
gcc-3.4.4 on powerpc: drivers/net/typhoon.c:137: error: version causes a section type conflict Cc: Jeff Garzik <jeff@garzik.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: (32 commits) x86: cpa, strict range check in try_preserve_large_page() x86: cpa, enable CONFIG_DEBUG_PAGEALLOC on 64-bit x86: cpa, use page pool x86: introduce page pool in cpa x86: DEBUG_PAGEALLOC: enable after mem_init() brk: help text typo fix lguest: accept guest _PAGE_PWT page table entries x86 PM: update stale comments x86 PM: consolidate suspend and hibernation code x86 PM: rename 32-bit files in arch/x86/power x86 PM: move 64-bit hibernation files to arch/x86/power x86: trivial printk optimizations x86: fix early_ioremap pagetable ops x86: construct 32-bit boot time page tables in native format. x86, core: remove CONFIG_FORCED_INLINING x86: avoid unused variable warning in mm/init_64.c x86: fixup more paravirt fallout brk: document randomize_va_space and CONFIG_COMPAT_BRK (was Re: x86: fix sparse warnings in acpi/bus.c x86: fix sparse warning in topology.c ...
2008-02-09isdn: fix section mismatch warning for ISACVerSam Ravnborg
Fix following warnings: WARNING: drivers/isdn/hisax/built-in.o(.text+0x19723): Section mismatch in reference from the function ISACVersion() to the variable .devinit.data:ISACVer WARNING: drivers/isdn/hisax/built-in.o(.text+0x2005b): Section mismatch in reference from the function setup_avm_a1_pcmcia() to the function .devinit.text:setup_isac() ISACVer were only used from function annotated __devinit so add same annotation to ISACVer. One af the fererencing functions missed __devinit so add it and kill an additional warning. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Karsten Keil <kkeil@suse.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-09isdn: fix section mismatch warnings from hisax_cs_setup_cardSam Ravnborg
Fix the following warnings: WARNING: drivers/isdn/hisax/built-in.o(.text+0x722): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_teles3() WARNING: drivers/isdn/hisax/built-in.o(.text+0x72c): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_s0box() WARNING: drivers/isdn/hisax/built-in.o(.text+0x736): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_telespci() WARNING: drivers/isdn/hisax/built-in.o(.text+0x747): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_avm_pcipnp() WARNING: drivers/isdn/hisax/built-in.o(.text+0x74e): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_elsa() WARNING: drivers/isdn/hisax/built-in.o(.text+0x755): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_diva() WARNING: drivers/isdn/hisax/built-in.o(.text+0x75c): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_sedlbauer() WARNING: drivers/isdn/hisax/built-in.o(.text+0x763): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_netjet_s() WARNING: drivers/isdn/hisax/built-in.o(.text+0x76a): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_hfcpci() WARNING: drivers/isdn/hisax/built-in.o(.text+0x771): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_hfcsx() WARNING: drivers/isdn/hisax/built-in.o(.text+0x778): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_niccy() WARNING: drivers/isdn/hisax/built-in.o(.text+0x77f): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_bkm_a4t() WARNING: drivers/isdn/hisax/built-in.o(.text+0x786): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_sct_quadro() WARNING: drivers/isdn/hisax/built-in.o(.text+0x78d): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_gazel() WARNING: drivers/isdn/hisax/built-in.o(.text+0x794): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_w6692() WARNING: drivers/isdn/hisax/built-in.o(.text+0x79b): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_netjet_u() WARNING: drivers/isdn/hisax/built-in.o(.text+0x7a2): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_enternow_pci() checkcard() are the only user of hisax_cs_setup_card(). And checkcard is only used during init or when hot plugging ISDN devices. So annotate hisax_cs_setup_card() with __devinit. checkcard() is used by exported functions so it cannot be annotated __devinit. Annotate it with __ref so modpost ignore references to _devinit section. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Karsten Keil <kkeil@suse.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-09isdn: fix section mismatch warnings in isac.c and isar.cSam Ravnborg
Fix the following warnings: WARNING: drivers/isdn/hisax/built-in.o(.text+0x1b276): Section mismatch in reference from the function inithscxisac() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x1b286): Section mismatch in reference from the function inithscxisac() to the function .devinit.text:initisac() WARNING: drivers/isdn/hisax/built-in.o(.text+0x1fec7): Section mismatch in reference from the function AVM_card_msg() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x21669): Section mismatch in reference from the function AVM_card_msg() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x21671): Section mismatch in reference from the function AVM_card_msg() to the function .devinit.text:initisac() WARNING: drivers/isdn/hisax/built-in.o(.text+0x2991e): Section mismatch in reference from the function Sedl_card_msg() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x29936): Section mismatch in reference from the function Sedl_card_msg() to the function .devinit.text:initisac() WARNING: drivers/isdn/hisax/built-in.o(.text+0x2993e): Section mismatch in reference from the function Sedl_card_msg() to the function .devinit.text:initisar() WARNING: drivers/isdn/hisax/built-in.o(.text+0x2e026): Section mismatch in reference from the function NETjet_S_card_msg() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x2e02e): Section mismatch in reference from the function NETjet_S_card_msg() to the function .devinit.text:initisac() WARNING: drivers/isdn/hisax/built-in.o(.text+0x37813): Section mismatch in reference from the function BKM_card_msg() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x37823): Section mismatch in reference from the function BKM_card_msg() to the function .devinit.text:initisac() initisar(), initisac() and clear_pending_isac_ints() were all used via a cardmsg fnction - which may be called ouside __devinit context. So remove the bogus __devinit annotation of the above three functions to fix the warnings. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Karsten Keil <kkeil@suse.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 21:42:44 +0000