| Age | Commit message (Collapse) | Author |
|---|
|
The driver RQ has two possible configurations: striding RQ and
non-striding RQ. Until this patch, the driver always reported the
number of hardware WQEs (ring descriptors). For non striding RQ
configuration, this was OK since we have one WQE per pending packet
For striding RQ, multiple packets can fit into one WQE. For better
user experience we normalize the rx_pending parameter (size of wqe/mtu)
as the average ring size in case of striding RQ.
Fixes: 461017cb006a ('net/mlx5e: Support RX multi-packet WQE ...')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of asking the firmware to flush the SQ (Send Queue) via
asynchronous completions when moved to error, we handle SQ flush
manually (mlx5e_free_tx_descs) same as we did when SQ flush got
timed out or on tx_timeout.
This will reduce SQs flush time and speedup interface down procedure.
Moved mlx5e_free_tx_descs to the end of en_tx.c for tx
critical code locality.
Fixes: 29429f3300a3 ('net/mlx5e: Timeout if SQ doesn't flush during close')
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ICO (Internal control operations) SQ (Send Queue) is closed/disabled
after RQ (Receive Queue). After RQ is closed an ICO SQ completion
might post a fragmented MPWQE (Multi Packet Work Queue Element) into
that RQ.
As on regular RQ post, check if we are allowed to post to that
RQ (RQ is enabled). Cleanup in-progress UMR MPWQE on mlx5e_free_rx_descs
if needed.
Fixes: bc77b240b3c5 ('net/mlx5e: Add fragmented memory support for RX multi packet WQE')
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This will significantly reduce receive queue flush time on interface
down.
Instead of asking the firmware to flush the RQ (Receive Queue) via
asynchronous completions when moved to error, we handle RQ flush
manually (mlx5e_free_rx_descs) same as we did when RQ flush got timed
out.
This will reduce RQs flush time and speedup interface down procedure
(ifconfig down) from 6 sec to 0.3 sec on a 48 cores system.
Moved mlx5e_free_rx_descs en_main.c where it is needed, to keep en_rx.c
free form non critical data path code for better code locality.
Fixes: 6cd392a082de ('net/mlx5e: Handle RQ flush in error cases')
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ConnectX-4 UMR (User Memory Region) MTT translation table offset in WQE
is limited to U16_MAX, before this patch we ignored that limitation and
requested the maximum possible UMR translation length that the netdev
might need (MAX channels * MAX pages per channel).
In case of a system with #cores > 32 and when linear WQE allocation fails,
falling back to using UMR WQEs will cause the RQ (Receive Queue) to get
stuck.
Here we limit UMR length to min(U16_MAX, max required pages) (while
considering the required alignments) on driver load, by default U16_MAX is
sufficient since the default RX rings value guarantees that we are in
range, dynamically (on set_ringparam/set_channels) we will check if the
new required UMR length (num mtts) is still in range, if not, fail the
request.
Fixes: bc77b240b3c5 ('net/mlx5e: Add fragmented memory support for RX multi packet WQE')
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull drm fixes from Dave Airlie:
"A bunch of fixes covering i915, amdgpu, one tegra and some core DRM
ones. Nothing too strange at this point"
* tag 'drm-fixes-for-4.8-rc4' of git://people.freedesktop.org/~airlied/linux: (21 commits)
drm/atomic: Don't potentially reset color_mgmt_changed on successive property updates.
drm: Protect fb_defio in drivers with CONFIG_KMS_FBDEV_EMULATION
drm/amdgpu: skip TV/CV in display parsing
drm/amdgpu: avoid a possible array overflow
drm/amdgpu: fix lru size grouping v2
drm/tegra: dsi: Enhance runtime power management
drm/i915: Fix botched merge that downgrades CSR versions.
drm/i915/skl: Ensure pipes with changed wms get added to the state
drm/i915/gen9: Only copy WM results for changed pipes to skl_hw
drm/i915/skl: Add support for the SAGV, fix underrun hangs
drm/i915/gen6+: Interpret mailbox error flags
drm/i915: Reattach comment, complete type specification
drm/i915: Unconditionally flush any chipset buffers before execbuf
drm/i915/gen9: Drop invalid WARN() during data rate calculation
drm/i915/gen9: Initialize intel_state->active_crtcs during WM sanitization (v2)
drm: Reject page_flip for !DRIVER_MODESET
drm/amdgpu: fix timeout value check in amd_sched_job_recovery
drm/amdgpu: fix sdma_v2_4_ring_test_ib
drm/amdgpu: fix amdgpu_move_blit on 32bit systems
drm/radeon: fix radeon_move_blit on 32bit systems
...
|
|
property updates.
Due to assigning the 'replaced' value instead of or'ing it,
if drm_atomic_crtc_set_property() gets called multiple times,
the last call will define the color_mgmt_changed flag, so
a non-updating call to a property can reset the flag and
prevent actual hw state updates required by preceding
property updates.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: <stable@vger.kernel.org> # v4.6+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"This lot provides:
- plug a hotplug race in the new affinity infrastructure
- a fix for the trigger type of chained interrupts
- plug a potential memory leak in the core code
- a few fixes for ARM and MIPS GICs"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips-gic: Implement activate op for device domain
irqchip/mips-gic: Cleanup chip and handler setup
genirq/affinity: Use get/put_online_cpus around cpumask operations
genirq: Fix potential memleak when failing to get irq pm
irqchip/gicv3-its: Disable the ITS before initializing it
irqchip/gicv3: Remove disabling redistributor and group1 non-secure interrupts
irqchip/gic: Allow self-SGIs for SMP on UP configurations
genirq: Correctly configure the trigger on chained interrupts
|
|
An evil userspace could try to cause deadlock by passing an unfaulted-in
GEM bo as submit->bos (or submit->cmds) table. Which will trigger
msm_gem_fault() while we already hold struct_mutex. See:
https://github.com/freedreno/msmtest/blob/master/evilsubmittest.c
Cc: stable@vger.kernel.org
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Use instead __copy_from_user_inatomic() and fallback to slow-path where
we drop and re-aquire the lock in case of fault.
Cc: stable@vger.kernel.org
Reported-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A few updates for timers & co:
- prevent a livelock in the timekeeping code when debugging is
enabled
- prevent out of bounds access in the timekeeping debug code
- various fixes in clocksource drivers
- a new maintainers entry"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/sun4i: Clear interrupts after stopping timer in probe function
drivers/clocksource/pistachio: Fix memory corruption in init
clocksource/drivers/timer-atmel-pit: Enable mck clock
clocksource/drivers/pxa: Fix include files for compilation
MAINTAINERS: Add ARM ARCHITECTED TIMER entry
timekeeping: Cap array access in timekeeping_debug
timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING
|
|
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
We already have need_inval in ib_mr, lets use
that instead.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Merge fixes from Andrew Morton:
"11 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: silently skip readahead for DAX inodes
dax: fix device-dax region base
fs/seq_file: fix out-of-bounds read
mm: memcontrol: avoid unused function warning
mm: clarify COMPACTION Kconfig text
treewide: replace config_enabled() with IS_ENABLED() (2nd round)
printk: fix parsing of "brl=" option
soft_dirty: fix soft_dirty during THP split
sysctl: handle error writing UINT_MAX to u32 fields
get_maintainer: quiet noisy implicit -f vcs_file_exists checking
byteswap: don't use __builtin_bswap*() with sparse
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Round one of 4.8 rc fixes.
This should be the bulk of the -rc fixes for 4.8. I only have a few
things that are still outstanding (two ipoib bugs for which the
solution is not yet fully known, and a few queued items that came in
after my last push and I didn't want to delay this pull request for
late comers again).
Even though the patch count is kind of high, everything is minor fixes
so the overall churn is pretty low.
Summary:
- minor fixes to cxgb4
- minor fixes to mlx4
- one minor fix each to core, rxe, isert, srpt, mlx5, ocrdma, and usnic
- six or so fixes to i40iw fixes
- the rest are hfi1 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (34 commits)
i40iw: Send last streaming mode message for loopback connections
IB/srpt: Update sport->port_guid with each port refresh
RDMA/ocrdma: Fix the max_sge reported from FW
i40iw: Avoid writing to freed memory
i40iw: Fix double free of allocated_buffer
IB/mlx5: Remove superfluous include of io-mapping.h
i40iw: Do not set self-referencing pointer to NULL after kfree
i40iw: Add missing NULL check for MPA private data
iw_cxgb4: Fix cxgb4 arm CQ logic w/IB_CQ_REPORT_MISSED_EVENTS
i40iw: Add missing check for interface already open
i40iw: Protect req_resource_num update
i40iw: Change mem_resources pointer to a u8
IB/core: Use memdup_user() rather than duplicating its implementation
IB/qib: Use memdup_user() rather than duplicating its implementation
iw_cxgb4: use the MPA initiator's IRD if < our ORD
iw_cxgb4: limit IRD/ORD advertised to ULP by device max.
IB/hfi1: Fix mm_struct use after free
IB/rdmvat: Fix double vfree() in rvt_create_qp() error path
IB/hfi1: Improve J_KEY generation
IB/hfi1: Return invalid field for non-QSFP CableInfo queries
...
|
|
On 32-bit systems, mask is only an array of 3 longs, not 4, so don't try
to write to mask[3].
Also include build-time checks in case the size of the bitmask changes.
Fixes: 3c36a2aded8c ("sfc: display vadaptor statistics for all interfaces")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- another stable fix for DM flakey (that tweaks the previous fix that
didn't factor in expected 'drop_writes' behavior for read IO).
- a dm-log bio operation flags fix for the broader block changes that
were merged during the 4.8 merge window.
* tag 'dm-4.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm log: fix unitialized bio operation flags
dm flakey: fix reads to be issued if drop_writes configured
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"Fixes from Will Deacon:
- fix a couple of thinkos in the CMDQ error handling and
short-descriptor page table code that have been there since day one
- disable stalling faults, since they may result in hardware deadlock
- fix an accidental BUG() when passing disable_bypass=1 on the
cmdline"
* tag 'iommu-fixes-v4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/arm-smmu: Don't BUG() if we find aborting STEs with disable_bypass
iommu/arm-smmu: Disable stalling faults for all endpoints
iommu/arm-smmu: Fix CMDQ error handling
iommu/io-pgtable-arm-v7s: Fix attributes when splitting blocks
|
|
Pull block fixes from Jens Axboe:
"Here's a set of block fixes for the current 4.8-rc release. This
contains:
- a fix for a secure erase regression, from Adrian.
- a fix for an mmc use-after-free bug regression, also from Adrian.
- potential zero pointer deference in bdev freezing, from Andrey.
- a race fix for blk_set_queue_dying() from Bart.
- a set of xen blkfront fixes from Bob Liu.
- three small fixes for bcache, from Eric and Kent.
- a fix for a potential invalid NVMe state transition, from Gabriel.
- blk-mq CPU offline fix, preventing us from issuing and completing a
request on the wrong queue. From me.
- revert two previous floppy changes, since they caused a user
visibile regression. A better fix is in the works.
- ensure that we don't send down bios that have more than 256
elements in them. Fixes a crash with bcache, for example. From
Ming.
- a fix for deferencing an error pointer with cgroup writeback.
Fixes a regression. From Vegard"
* 'for-linus' of git://git.kernel.dk/linux-block:
mmc: fix use-after-free of struct request
Revert "floppy: refactor open() flags handling"
Revert "floppy: fix open(O_ACCMODE) for ioctl-only open"
fs/block_dev: fix potential NULL ptr deref in freeze_bdev()
blk-mq: improve warning for running a queue on the wrong CPU
blk-mq: don't overwrite rq->mq_ctx
block: make sure a big bio is split into at most 256 bvecs
nvme: Fix nvme_get/set_features() with a NULL result pointer
bdev: fix NULL pointer dereference
xen-blkfront: free resources if xlvbd_alloc_gendisk fails
xen-blkfront: introduce blkif_set_queue_limits()
xen-blkfront: fix places not updated after introducing 64KB page granularity
bcache: pr_err: more meaningful error message when nr_stripes is invalid
bcache: RESERVE_PRIO is too small by one when prio_buckets() is a power of two.
bcache: register_bcache(): call blkdev_put() when cache_alloc() fails
block: Fix race triggered by blk_set_queue_dying()
block: Fix secure erase
nvme: Prevent controller state invalid transition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov:
"Simply small driver fixups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ads7846 - remove redundant regulator_disable call
Input: synaptics-rmi4 - fix register descriptor subpacket map construction
Input: tegra-kbc - fix inverted reset logic
Input: silead - use devm_gpiod_get
Input: i8042 - set up shared ps2_cmd_mutex for AUX ports
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"Resource management:
- Update "pci=resource_alignment" documentation (Mathias Koehrer)
MSI:
- Use positive flags in pci_alloc_irq_vectors() (Christoph Hellwig)
- Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors() (Christoph Hellwig)
Intel VMD host bridge driver:
- Fix infinite loop executing irq's (Keith Busch)"
* tag 'pci-v4.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
x86/PCI: VMD: Fix infinite loop executing irq's
PCI: Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors()
PCI: Use positive flags in pci_alloc_irq_vectors()
PCI: Update "pci=resource_alignment" documentation
|
|
The data offset for a dax region needs to account for a reservation in
the resource range. Otherwise, device-dax is allowing mappings directly
into the memmap or device-info-block area with crash signatures like the
following:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: get_zone_device_page+0x11/0x30
Call Trace:
follow_devmap_pmd+0x298/0x2c0
follow_page_mask+0x275/0x530
__get_user_pages+0xe3/0x750
__gfn_to_pfn_memslot+0x1b2/0x450 [kvm]
tdp_page_fault+0x130/0x280 [kvm]
kvm_mmu_page_fault+0x5f/0xf0 [kvm]
handle_ept_violation+0x94/0x180 [kvm_intel]
vmx_handle_exit+0x1d3/0x1440 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0x81d/0x16a0 [kvm]
kvm_vcpu_ioctl+0x33c/0x620 [kvm]
do_vfs_ioctl+0xa2/0x5d0
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x1a/0xa4
Fixes: ab68f2622136 ("/dev/dax, pmem: direct access to persistent memory")
Link: http://lkml.kernel.org/r/147205536732.1606.8994275381938837346.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Abhilash Kumar Mulumudi <m.abhilash-kumar@hpe.com>
Reported-by: Toshi Kani <toshi.kani@hpe.com>
Tested-by: Toshi Kani <toshi.kani@hpe.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When team is in bridge and LACP is utilized, LACPDU packets are pushed
to userspace using raw socket and there they are processed. However,
since 8626c56c8279b, LACPDU skbs are dropped by bridge rx_handler so
they never reach packet handlers in rx path. Fix this by explicity treat
LACPDUs to be pushed to exact delivery in team rx_handler.
Reported-by: Ido Schimmel <idosch@mellanox.com>
Fixes: 8626c56c8279b ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ppe_cb->ppe_common_cb is being dereferenced before a null check is
being made on it. If ppe_cb->ppe_common_cb is null then we end up
with a null pointer dereference when assigning dsaf_dev. Fix this
by moving the initialisation of dsaf_dev once we know
ppe_cb->ppe_common_cb is OK to dereference.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In all other places in this file where 'find_first_bit' is called,
port_num is defined as a 'u8' and no casting is done.
Do the same here in order to be more consistent.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Device notifications are not received after the first interface is
closed; since there is an unregister for notifications on every
interface close. Correct this by unregistering for device
notifications only when the last interface is closed. Also, make
all operations on the i40iw_notifiers_registered atomic as it
can be read/modified concurrently.
Fixes: 8e06af711bf2 ("i40iw: add main, hdr, status")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Update iwqp->hw_iwarp_state to reflect the new state of the CQP
modify QP operation. This avoids reissuing a CQP operation to
modify a QP to a state that it is already in.
Fixes: 4e9042e647ff ("i40iw: add hw and utils files")
Reported-by: Stefan Assmann <sassmann@redhat.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
function
The bootloader (U-boot) sometimes uses this timer for various delays.
It uses it as a ongoing counter, and does comparisons on the current
counter value. The timer counter is never stopped.
In some cases when the user interacts with the bootloader, or lets
it idle for some time before loading Linux, the timer may expire,
and an interrupt will be pending. This results in an unexpected
interrupt when the timer interrupt is enabled by the kernel, at
which point the event_handler isn't set yet. This results in a NULL
pointer dereference exception, panic, and no way to reboot.
Clear any pending interrupts after we stop the timer in the probe
function to avoid this.
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
Driver init code incorrectly uses the block base address and as a result
clears clocksource structure's fields instead of the hardware registers.
Commit 09a998201649 ("timekeeping: Lift clocksource cacheline
restriction") has changed the offsets within pistachio_clocksource
structure and what has previously gone unnoticed now leads to a kernel
panic during boot.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
mck is needed to get the PIT working. Explicitly prepare_enable it instead
of assuming it is enabled.
This solves an issue where the system is freezing when the ETM/ETB drivers
are enabled.
Reported-by: Olivier Schonken <olivier.schonken@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The CCN PMU driver leaves the counting logic always enabled, and thus
events are enabled while groups are manipulated. As each event is
stopped and read individually, this leads to arbitrary skew across event
groups, which can be seen if counting several identical events.
To avoid this, implement pmu_{enable,disable} callbacks to stop and
start all counters atomically around event manipulation. As the counters
are now stopped, we cannot poll the cycle counter to wait for events to
drain from the bus. However, as the counters are stopped and the events
will not be read regardless, we can simply allow the bus to drain
naturally.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
|
|
The CCN PMU driver has a single hrtimer, used to simulate a periodic
interrupt on systems where the overflow interrupt is not possible to
use. The hrtimer is started when any event is started, and cancelled when
any event is stopped. Thus, stopping a single event is sufficient to
disable to hrtimer, and overflows (of other events) may be lost.
To avoid this, this patch reworks the hrtimer start/cancel to only occur
when the first event is added to a PMU, and the last event removed,
making use of the existing bitmap counting active events.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
|
|
Currently the IRQ core is permitted to make the CCN PMU IRQ handler
threaded, and will allow userspace to change the CPU affinity of the
interrupt behind our back. Both of these could violate our
synchronisation requirements with the core perf code, which relies upon
strict CPU affinity and disabling of interrupts to guarantee mutual
exclusion in some cases.
As with the CPU PMU drivers, we should request the interrupt with
IRQF_NOBALANCING and IRQF_NO_THREAD, to avoid these issues.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
|
|
When cp_rx_poll does not get enough packet, it will check the rx
interrupt status again. If so, it will jumpt to rx_status_loop again.
But the goto jump resets the rx variable as zero too.
As a result, it causes one possible deadloop. Assume this case,
rx_status_loop only gets the packet count which is less than budget,
and (cpr16(IntrStatus) & cp_rx_intr_mask) condition is always true.
It causes the deadloop happens and system is blocked.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into fixes
SCPI/Vexpress fixes for v4.8-rc
Couple of minor fixes to add missing of_node_put after calling
of_parse_phandle in SCPI and vexpress-config bus drivers(Peter Chen)
* tag 'vexpress-fixes-4.8-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scpi: add missing of_node_put after calling of_parse_phandle
bus: vexpress-config: add missing of_node_put after calling of_parse_phandle
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
This change makes a common flow for Client instance open during init
and reset path. The Client subtask can handle both the cases instead of
making a separate notify_client_of_open call.
Also it may fix a bug during reset where the service task was leaking
some memory and causing issues.
Change-Id: I7232a32fd52b82e863abb54266fa83122f80a0cd
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
OMAP-GPMC: fixes for v4.8-rc1
Allow other children of GPMC to probe even if any child fails. This fixes
problem on Overo boards where networking device child doesn't probe due
to broken NAND child.
* tag 'gpmc-omap-v4.8-rc1' of https://github.com/rogerq/linux:
memory: omap-gpmc: allow probe of child nodes to fail
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
This reverts:
commit 33c133cc7598 ("phy: IRQ cannot be shared")
On hardware with multiple PHY devices hooked up to the same IRQ line, allow
them to share it.
Sergei Shtylyov says:
"I'm not sure now what was the reason I concluded that the IRQ sharing
was impossible... most probably I thought that the kernel IRQ handling
code exited the loop over the IRQ actions once IRQ_HANDLED was returned
-- which is obviously not so in reality..."
Signed-off-by: Xander Huff <xander.huff@ni.com>
Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We kept shadow copies of which interrupt sources we have enabled and
disabled, but due to an order bug in how intrl2_mask_clear was defined,
we could run into the following scenario:
CPU0 CPU1
intrl2_1_mask_clear(..)
sets INTRL2_CPU_MASK_CLEAR
bcm_sf2_switch_1_isr
read INTRL2_CPU_STATUS and masks with stale
irq1_mask value
updates irq1_mask value
Which would make us loop again and again trying to process and interrupt
we are not clearing since our copy of whether it was enabled before
still indicates it was not. Fix this by updating the shadow copy first,
and then unasking at the HW level.
Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v4.8-rc4
Here are a couple of fixes for non-atomic allocations in write paths,
and some new option device ids.
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
We call mmc_req_is_special() after having processed a request, but
it could be freed after that. Check that ahead of time, and use
the cached value.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Fixes: c2df40dfb8c0 ("drivers: use req op accessor")
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
git://anongit.freedesktop.org/drm-intel into drm-fixes
i915 fixes queue.
* tag 'drm-intel-fixes-2016-08-25' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Fix botched merge that downgrades CSR versions.
drm/i915/skl: Ensure pipes with changed wms get added to the state
drm/i915/gen9: Only copy WM results for changed pipes to skl_hw
drm/i915/skl: Add support for the SAGV, fix underrun hangs
drm/i915/gen6+: Interpret mailbox error flags
drm/i915: Reattach comment, complete type specification
drm/i915: Unconditionally flush any chipset buffers before execbuf
drm/i915/gen9: Drop invalid WARN() during data rate calculation
drm/i915/gen9: Initialize intel_state->active_crtcs during WM sanitization (v2)
|
|
For reasons that entirely elude me fb.h exposes all the structures,
even when it is not enabled. Except for special stuff like fb_defio.
Which means all the drivers which haven't yet switched over to the
defio support in the helpers and still roll their own, will fail
to compile when fbdev emulation is disabled. Protect just those
bits, as a gnarly reminder that conversion to the core defio helpers
would be good.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-6-git-send-email-daniel.vetter@ffwll.ch
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
smatch rightfully says:
drivers/i2c/busses/i2c-bcm-kona.c:646 bcm_kona_i2c_xfer() warn: inconsistent indenting
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Reviewed-by: Tim Kryger <tim.kryger@gmail.com>
|
|
We must use the same device we used for mapping.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
We must use the same device we used for mapping.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Make sure the index to the active channel is invalidated when switching
fails.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
|
|
Send a zero length last streaming mode message for loopback
connections to synchronize between accepting QP and connecting QP.
This avoids data transfer to start on the accepting QP before
the connecting QP is in RTS. Also remove function i40iw_loopback_nop()
as it is no longer used.
Fixes: f27b4746f378 ("i40iw: add connection management code")
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This reverts commit 09954bad448791ef01202351d437abdd9497a804.
|
