| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into master
Pull driver core fix from Greg KH:
"A single driver core fix for 5.8-rc7. It resolves a problem found in
the previous fix for this code made in 5.8-rc6. Hopefully this is all
now cleared up, as this seems to be the last of the reported issues in
this area, and was tested on the problem hardware.
This patch has been in linux-next with no reported problems"
* tag 'driver-core-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
device property: Avoid NULL pointer dereference in device_get_next_child_node()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging into master
Pull staging driver fixes from Greg KH:
"Five small staging driver fixes for 5.8-rc7 to resolve some reported
problems:
- four comedi driver fixes for problems found with them
- a syzbot-found fix for the wlang-ng driver that resolves a much
reported problem.
All of these have been in linux-next with no reported issues"
* tag 'staging-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: wlan-ng: properly check endpoint types
staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty into master
Pull tty/serial/fbcon fixes from Greg KH:
"Here are some small tty and serial and fbcon fixes for 5.8-rc7 to
resolve some reported issues.
The fbcon fix is in here as it was simpler to take it this way (and it
was acked by the maintainer) as it was related to the vt console fix
as well, both of which resolve syzbot-found issues in the console
handling code.
The other serial driver fixes are for small issues reported in the -rc
releases.
All of these have been in linux-next with no reported issues"
* tag 'tty-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: exar: Fix GPIO configuration for Sealevel cards based on XR17V35X
fbdev: Detect integer underflow at "struct fbcon_ops"->clear_margins.
serial: 8250_mtk: Fix high-speed baud rates clamping
serial: 8250: fix null-ptr-deref in serial8250_start_tx()
serial: tegra: drop bogus NULL tty-port checks
serial: tegra: fix CREAD handling for PIO
tty: xilinx_uartps: Really fix id assignment
vt: Reject zero-sized screen buffer size.
|
|
Fix double-free bug in the error path.
Fixes: 6529007522de ("drm: of: Add drm_of_lvds_get_dual_link_pixel_order")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1595502654-40595-1-git-send-email-biju.das.jz@bp.renesas.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb into master
Pull USB fixes from Greg KH:
"Three small USB XHCI driver fixes for 5.8-rc7.
They all resolve some minor issues that have been reported on some
different platforms.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: tegra: Fix allocation for the FPCI context
usb: xhci: Fix ASM2142/ASM3142 DMA addressing
usb: xhci-mtk: fix the failure of bandwidth allocation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi into master
Pull SCSI fix from James Bottomley:
"Small core patch to fix a corner case bug: we forgot to run the queues
to handle starvation in the error exit from the scsi_queue_rq routine,
which can lead to hangs on error conditions"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: Run queue in case of I/O resource contention failure
|
|
After commit 6e02318eaea5 ("nvme: add support for the Write Zeroes
command"), SK hynix PC400 becomes very slow with the following error
message:
[ 224.567695] blk_update_request: operation not supported error, dev nvme1n1, sector 499384320 op 0x9:(WRITE_ZEROES) flags 0x1000000 phys_seg 0 prio class 0]
SK Hynix PC400 has a buggy firmware that treats NLB as max value instead
of a range, so the NLB passed isn't a valid value to the firmware.
According to SK hynix there are three commands are affected:
- Write Zeroes
- Compare
- Write Uncorrectable
Right now only Write Zeroes is implemented, so disable it completely on
SK hynix PC400.
BugLink: https://bugs.launchpad.net/bugs/1872383
Cc: kyounghwan sohn <kyounghwan.sohn@sk.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
If the controller died exactly when we are receiving icresp
we hang because icresp may never return. Make sure to set a
high finite limit.
Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Now that BPF program/link management is centralized in generic net_device
code, kernel code never queries program id from drivers, so
XDP_QUERY_PROG/XDP_QUERY_PROG_HW commands are unnecessary.
This patch removes all the implementations of those commands in kernel, along
the xdp_attachment_query().
This patch was compile-tested on allyesconfig.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200722064603.3350758-10-andriin@fb.com
|
|
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull timer fix from Ingo Molnar:
"Fix a suspend/resume regression (crash) on TI AM3/AM4 SoC's"
* tag 'timers-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull EFI fixes from Ingo Molnar:
"Various EFI fixes:
- Fix the layering violation in the use of the EFI runtime services
availability mask in users of the 'efivars' abstraction
- Revert build fix for GCC v4.8 which is no longer supported
- Clean up some x86 EFI stub details, some of which are borderline
bugs that copy around garbage into padding fields - let's fix these
out of caution.
- Fix build issues while working on RISC-V support
- Avoid --whole-archive when linking the stub on arm64"
* tag 'efi-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Revert "efi/x86: Fix build with gcc 4"
efi/efivars: Expose RT service availability via efivars abstraction
efi/libstub: Move the function prototypes to header file
efi/libstub: Fix gcc error around __umoddi3 for 32 bit builds
efi/libstub/arm64: link stub lib.a conditionally
efi/x86: Only copy upto the end of setup_header
efi/x86: Remove unused variables
|
|
Pull networking fixes from David Miller:
1) Fix RCU locaking in iwlwifi, from Johannes Berg.
2) mt76 can access uninitialized NAPI struct, from Felix Fietkau.
3) Fix race in updating pause settings in bnxt_en, from Vasundhara
Volam.
4) Propagate error return properly during unbind failures in ax88172a,
from George Kennedy.
5) Fix memleak in adf7242_probe, from Liu Jian.
6) smc_drv_probe() can leak, from Wang Hai.
7) Don't muck with the carrier state if register_netdevice() fails in
the bonding driver, from Taehee Yoo.
8) Fix memleak in dpaa_eth_probe, from Liu Jian.
9) Need to check skb_put_padto() return value in hsr_fill_tag(), from
Murali Karicheri.
10) Don't lose ionic RSS hash settings across FW update, from Shannon
Nelson.
11) Fix clobbered SKB control block in act_ct, from Wen Xu.
12) Missing newlink in "tx_timeout" sysfs output, from Xiongfeng Wang.
13) IS_UDPLITE cleanup a long time ago, incorrectly handled
transformations involving UDPLITE_RECV_CC. From Miaohe Lin.
14) Unbalanced locking in netdevsim, from Taehee Yoo.
15) Suppress false-positive error messages in qed driver, from Alexander
Lobakin.
16) Out of bounds read in ax25_connect and ax25_sendmsg, from Peilin Ye.
17) Missing SKB release in cxgb4's uld_send(), from Navid Emamdoost.
18) Uninitialized value in geneve_changelink(), from Cong Wang.
19) Fix deadlock in xen-netfront, from Andera Righi.
19) flush_backlog() frees skbs with IRQs disabled, so should use
dev_kfree_skb_irq() instead of kfree_skb(). From Subash Abhinov
Kasiviswanathan.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
drivers/net/wan: lapb: Corrected the usage of skb_cow
dev: Defer free of skbs in flush_backlog
qrtr: orphan socket in qrtr_release()
xen-netfront: fix potential deadlock in xennet_remove()
flow_offload: Move rhashtable inclusion to the source file
geneve: fix an uninitialized value in geneve_changelink()
bonding: check return value of register_netdevice() in bond_newlink()
tcp: allow at most one TLP probe per flight
AX.25: Prevent integer overflows in connect and sendmsg
cxgb4: add missing release on skb in uld_send()
net: atlantic: fix PTP on AQC10X
AX.25: Prevent out-of-bounds read in ax25_sendmsg()
sctp: shrink stream outq when fails to do addstream reconf
sctp: shrink stream outq only when new outcnt < old outcnt
AX.25: Fix out-of-bounds read in ax25_connect()
enetc: Remove the mdio bus on PF probe bailout
net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offload
net: ethernet: ave: Fix error returns in ave_init
drivers/net/wan/x25_asy: Fix to make it work
ipvs: fix the connection sync failed in some cases
...
|
|
Commit 85750aeb748f ("bcache: use bio_{start,end}_io_acct") moves the
io account code to the location after bio_set_dev(bio, dc->bdev) in
cached_dev_make_request(). Then the account is performed incorrectly on
backing device, indeed the I/O should be counted to bcache device like
/dev/bcache0.
With the mistaken I/O account, iostat does not display I/O counts for
bcache device and all the numbers go to backing device. In writeback
mode, the hard drive may have 340K+ IOPS which is impossible and wrong
for spinning disk.
This patch introduces bch_bio_start_io_acct() and bch_bio_end_io_acct(),
which switches bio->bi_disk to bcache device before calling
bio_start_io_acct() or bio_end_io_acct(). Now the I/Os are counted to
bcache device, and bcache device, cache device and backing device have
their correct I/O count information back.
Fixes: 85750aeb748f ("bcache: use bio_{start,end}_io_acct")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Bcache uses struct bbio to do I/Os for meta data pages like uuids,
disk_buckets, prio_buckets, and btree nodes.
Example writing a btree node onto cache device, the process is,
- Allocate a struct bbio from mempool c->bio_meta.
- Inside struct bbio embedded a struct bio, initialize bi_inline_vecs
for this embedded bio.
- Call bch_bio_map() to map each meta data page to each bv from the
inlined bi_io_vec table.
- Call bch_submit_bbio() to submit the bio into underlying block layer.
- When the I/O completed, only release the struct bbio, don't touch the
reference counter of the meta data pages.
The struct bbio is defined as,
738 struct bbio {
739 unsigned int submit_time_us;
[snipped]
748 struct bio bio;
749 };
Because struct bio is embedded at the end of struct bbio, therefore the
actual size of struct bbio is sizeof(struct bio) + size of the embedded
bio->bi_inline_vecs.
Now all the meta data bucket size are limited to meta_bucket_pages(), if
the bucket size is large than meta_bucket_pages()*PAGE_SECTORS, rested
space in the bucket is unused. Therefore the most used space in meta
bucket is (1<<MAX_ORDER) pages, or (1<<CONFIG_FORCE_MAX_ZONEORDER) if it
is configured.
Therefore for large bucket size, it is unnecessary to calculate the
allocation size of mempool c->bio_meta as,
mempool_init_kmalloc_pool(&c->bio_meta, 2,
sizeof(struct bbio) +
sizeof(struct bio_vec) * bucket_pages(c))
It is too large, neither the Linux buddy allocator cannot allocate so
much continuous pages, nor the extra allocated pages are wasted.
This patch replace bucket_pages() to meta_bucket_pages() in two places,
- In bch_cache_set_alloc(), when initialize mempool c->bio_meta, uses
sizeof(struct bbio) + sizeof(struct bio_vec) * bucket_pages(c) to set
the allocating object size.
- In bch_bbio_alloc(), when calling bio_init() to set inline bvec talbe
bi_inline_bvecs, uses meta_bucket_pages() to indicate number of the
inline bio vencs number.
Now the maximum size of embedded bio inside struct bbio exactly matches
the limit of meta_bucket_pages(), no extra page wasted.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Mempool c->fill_iter is used to allocate memory for struct btree_iter in
bch_btree_node_read_done() to iterate all keys of a read-in btree node.
The allocation size is defined in bch_cache_set_alloc() by,
mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size))
where iter_size is defined by a calculation,
(sb->bucket_size / sb->block_size + 1) * sizeof(struct btree_iter_set)
For 16bit width bucket_size the calculation is OK, but now the bucket
size is extended to 32bit, the bucket size can be 2GB. By the above
calculation, iter_size can be 2048 pages (order 11 is still accepted by
buddy allocator).
But the actual size holds the bkeys in meta data bucket is limited to
meta_bucket_pages() already, which is 16MB. By the above calculation,
if replace sb->bucket_size by meta_bucket_pages() * PAGE_SECTORS, the
result is 16 pages. This is the size large enough for the mempool
allocation to struct btree_iter.
Therefore in worst case every time mempool c->fill_iter allocates, at
most 4080 pages are wasted and won't be used. Therefore this patch uses
meta_bucket_pages() * PAGE_SECTORS to calculate the iter size in
bch_cache_set_alloc(), to avoid extra memory allocation from mempool
c->fill_iter.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The following three sysfs files are created to display according feature
set information of bcache:
/sys/fs/bcache/<cache set UUID>/internal/feature_compat
/sys/fs/bcache/<cache set UUID>/internal/feature_ro_compat
/sys/fs/bcache/<cache set UUID>/internal/feature_incompat
is added by this patch, to display feature sets information of the cache
set.
Now only an incompat feature 'large_bucket' added in bcache, the sysfs
file content is:
[large_bucket]
string large_bucket means the running bcache drive supports incompat
feature 'large_bucket', the wrapping [] means the 'large_bucket' feature
is currently enabled on this cache set.
This patch is ready to display compat and ro_compat features, in future
once bcache code implements such feature sets, the according feature
strings will be displayed in their sysfs files too.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The large bucket feature is to extend bucket_size from 16bit to 32bit.
When create cache device on zoned device (e.g. zoned NVMe SSD), making
a single bucket cover one or more zones of the zoned device is the
simplest way to support zoned device as cache by bcache.
But current maximum bucket size is 16MB and a typical zone size of zoned
device is 256MB, this is the major motiviation to extend bucket size to
a larger bit width.
This patch is the basic and first change to support large bucket size,
the major changes it makes are,
- Add BCH_FEATURE_INCOMPAT_LARGE_BUCKET for the large bucket feature,
INCOMPAT means it introduces incompatible on-disk format change.
- Add BCH_FEATURE_INCOMPAT_FUNCS(large_bucket, LARGE_BUCKET) routines.
- Adds __le16 bucket_size_hi into struct cache_sb_disk at offset 0x8d0
for the on-disk super block format.
- For the in-memory super block struct cache_sb, member bucket_size is
extended from __u16 to __32.
- Add get_bucket_size() to combine the bucket_size and bucket_size_hi
from struct cache_sb_disk into an unsigned int value.
Since we already have large bucket size helpers meta_bucket_pages(),
meta_bucket_bytes() and alloc_meta_bucket_pages(), they make sure when
bucket size > 8MB, the memory allocation for bcache meta data bucket
won't fail no matter how large the bucket size extended. So these meta
data buckets are handled properly when the bucket size width increase
from 16bit to 32bit, we don't need to worry about them.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently the bcache internal btree node occupies a whole bucket. When
loading the btree node from cache device into memory, mca_data_alloc()
will call bch_btree_keys_alloc() to allocate memory for the whole bucket
size, ilog2(b->c->btree_pages) is send to bch_btree_keys_alloc() as the
parameter 'page_order'.
c->btree_pages is set as bucket_pages() in bch_cache_set_alloc(), for
bucket size > 8MB, ilog2(b->c->btree_pages) is 12 for 4KB page size. By
default the maximum page order __get_free_pages() accepts is MAX_ORDER
(11), in this condition bch_btree_keys_alloc() will always fail.
Because of other over-page-order allocation failure fails the cache
device registration, such btree node allocation failure wasn't observed
during runtime. After other blocking page allocation failures for bucket
size > 8MB, this btree node allocation issue may trigger potentical risk
e.g. infinite dead-loop to retry btree node allocation after failure.
This patch fixes the potential problem by setting c->btree_pages to
meta_bucket_pages() in bch_cache_set_alloc(). In the condition that
bucket size > 8MB, meta_bucket_pages() will always return a number which
won't exceed the maximum page order of the buddy allocator.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In bch_btree_cache_alloc() when CONFIG_BCACHE_DEBUG is configured,
allocate memory for c->verify_ondisk may fail if the bucket size > 8MB,
which will require __get_free_pages() to allocate continuous pages
with order > 11 (the default MAX_ORDER of Linux buddy allocator). Such
over size allocation will fail, and cause 2 problems,
- When CONFIG_BCACHE_DEBUG is configured, bch_btree_verify() does not
work, because c->verify_ondisk is NULL and bch_btree_verify() returns
immediately.
- bch_btree_cache_alloc() will fail due to c->verify_ondisk allocation
failed, then the whole cache device registration fails. And because of
this failure, the first problem of bch_btree_verify() has no chance to
be triggered.
This patch fixes the above problem by two means,
1) If pages allocation of c->verify_ondisk fails, set it to NULL and
returns bch_btree_cache_alloc() with -ENOMEM.
2) When calling __get_free_pages() to allocate c->verify_ondisk pages,
use ilog2(meta_bucket_pages(&c->sb)) to make sure ilog2() will always
generate a pages order <= MAX_ORDER (or CONFIG_FORCE_MAX_ZONEORDER).
Then the buddy system won't directly reject the allocation request.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
> 8MB
Similar to c->uuids, struct cache's prio_buckets and disk_buckets also
have the potential memory allocation failure during cache registration
if the bucket size > 8MB.
ca->prio_buckets can be stored on cache device in multiple buckets, its
in-memory space is allocated by kzalloc() interface but normally
allocated by alloc_pages() because the size > KMALLOC_MAX_CACHE_SIZE.
So allocation of ca->prio_buckets has the MAX_ORDER restriction too. If
the bucket size > 8MB, by default the page allocator will fail because
the page order > 11 (default MAX_ORDER value). ca->prio_buckets should
also use meta_bucket_bytes(), meta_bucket_pages() to decide its memory
size and use alloc_meta_bucket_pages() to allocate pages, to avoid the
allocation failure during cache set registration when bucket size > 8MB.
ca->disk_buckets is a single bucket size memory buffer, it is used to
iterate each bucket of ca->prio_buckets, and compose the bio based on
memory of ca->disk_buckets, then write ca->disk_buckets memory to cache
disk one-by-one for each bucket of ca->prio_buckets. ca->disk_buckets
should have in-memory size exact to the meta_bucket_pages(), this is the
size that ca->prio_buckets will be stored into each on-disk bucket.
This patch fixes the above issues and handle cache's prio_buckets and
disk_buckets properly for bucket size larger than 8MB.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Bcache allocates a whole bucket to store c->uuids on cache device, and
allocates continuous pages to store it in-memory. When the bucket size
exceeds maximum allocable continuous pages, bch_cache_set_alloc() will
fail and cache device registration will fail.
This patch allocates c->uuids by alloc_meta_bucket_pages(), and uses
ilog2(meta_bucket_pages(c)) to indicate order of c->uuids pages when
free it. When writing c->uuids to cache device, its size is decided
by meta_bucket_pages(c) * PAGE_SECTORS. Now c->uuids is properly handled
for bucket size > 8MB.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently the in-memory meta data like c->uuids or c->disk_buckets
are allocated by alloc_bucket_pages(). The macro alloc_bucket_pages()
calls __get_free_pages() to allocated continuous pages with order
indicated by ilog2(bucket_pages(c)),
#define alloc_bucket_pages(gfp, c) \
((void *) __get_free_pages(__GFP_ZERO|gfp, ilog2(bucket_pages(c))))
The maximum order is defined as MAX_ORDER, the default value is 11 (and
can be overwritten by CONFIG_FORCE_MAX_ZONEORDER). In bcache code the
maximum bucket size width is 16bits, this is restricted both by KEY_SIZE
size and bucket_size size from struct cache_sb_disk. The maximum 16bits
width and power-of-2 value is (1<<15) in unit of sector (512byte). It
means the maximum value of bucket size in bytes is (1<<24) bytes a.k.a
4096 pages.
When the bucket size is set to maximum permitted value, ilog2(4096) is
12, which exceeds the default maximum order __get_free_pages() can
accepted, the failed pages allocation will fail cache set registration
procedure and print a kernel oops message for the exceeded pages order.
This patch introduces meta_bucket_pages(), meta_bucket_bytes(), and
alloc_bucket_pages() helper routines. meta_bucket_pages() indicates the
maximum pages can be allocated to meta data bucket, meta_bucket_bytes()
indicates the according maximum bytes, and alloc_bucket_pages() does
the pages allocation for meta bucket. Because meta_bucket_pages()
chooses the smaller value among the bucket size and MAX_ORDER_NR_PAGES,
it still works when MAX_ORDER overwritten by CONFIG_FORCE_MAX_ZONEORDER.
Following patches will use these helper routines to decide maximum pages
can be allocated for different meta data buckets. If the bucket size is
larger than meta_bucket_bytes(), the bcache registration can continue to
success, just the space more than meta_bucket_bytes() inside the bucket
is wasted. Comparing bcache failed for large bucket size, wasting some
space for meta data buckets is acceptable at this moment.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Setting sb->first_bucket and checking sb->keys indeed are only for cache
device, it does not make sense to do them in read_super() for backing
device too.
This patch moves the related code piece into read_super_common()
explicitly for cache device and avoid the confusion.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The new added super block version BCACHE_SB_VERSION_BDEV_WITH_FEATURES
(5) BCACHE_SB_VERSION_CDEV_WITH_FEATURES value (6), is for the feature
set bits.
Devices have super block version equal to the new version will have
three new members for feature set bits in the on-disk super block,
__le64 feature_compat;
__le64 feature_incompat;
__le64 feature_ro_compat;
They are used for further new features which may introduce on-disk
format change, and avoid unncessary super block version increase.
The very basic features handling code skeleton is also initialized in
this patch.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In register_cache_set(), c is pointer to struct cache_set, and ca is
pointer to struct cache, if ca->sb.seq > c->sb.seq, it means this
registering cache has up to date version and other members, the in-
memory version and other members should be updated to the newer value.
But current implementation makes a cache set only has a single cache
device, so the above assumption works well except for a special case.
The execption is when a cache device new created and both ca->sb.seq and
c->sb.seq are 0, because the super block is never flushed out yet. In
the location for the following if() check,
2156 if (ca->sb.seq > c->sb.seq) {
2157 c->sb.version = ca->sb.version;
2158 memcpy(c->sb.set_uuid, ca->sb.set_uuid, 16);
2159 c->sb.flags = ca->sb.flags;
2160 c->sb.seq = ca->sb.seq;
2161 pr_debug("set version = %llu\n", c->sb.version);
2162 }
c->sb.version is not initialized yet and valued 0. When ca->sb.seq is 0,
the if() check will fail (because both values are 0), and the cache set
version, set_uuid, flags and seq won't be updated.
The above problem is hiden for current code, because the bucket size is
compatible among different super block version. And the next time when
running cache set again, ca->sb.seq will be larger than 0 and cache set
super block version will be updated properly.
But if the large bucket feature is enabled, sb->bucket_size is the low
16bits of the bucket size. For a power of 2 value, when the actual
bucket size exceeds 16bit width, sb->bucket_size will always be 0. Then
read_super_common() will fail because the if() check to
is_power_of_2(sb->bucket_size) is false. This is how the long time
hidden bug is triggered.
This patch modifies the if() check to the following way,
2156 if (ca->sb.seq > c->sb.seq || c->sb.seq == 0) {
Then cache set's version, set_uuid, flags and seq will always be updated
corectly including for a new created cache device.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In bch_cache_set_alloc() there is a big if() checks combined by 11 items
together. When this big if() statement fails, it is difficult to tell
exactly which item fails indeed.
This patch disassembles this big if() checks into 11 single if() checks,
which makes code debug more easier.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The improperly set bucket or block size will trigger error in
read_super_common(). For large bucket size, a more accurate error message
for invalid bucket or block size is necessary.
This patch disassembles the combined if() checks into multiple single
if() check, and provide more accurate error message for each check
failure condition.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Later patches will introduce feature set bits to on-disk super block and
increase super block version. Current code in read_super() which reads
common part of super block for version BCACHE_SB_VERSION_CDEV and version
BCACHE_SB_VERSION_CDEV_WITH_UUID will be shared with the new version.
Therefore this patch moves the reusable part into read_super_common(),
this preparation patch will make later patches more simplier and only
focus on new feature set bits.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
offset_to_stripe() returns the stripe number (in type unsigned int) from
an offset (in type uint64_t) by the following calculation,
do_div(offset, d->stripe_size);
For large capacity backing device (e.g. 18TB) with small stripe size
(e.g. 4KB), the result is 4831838208 and exceeds UINT_MAX. The actual
returned value which caller receives is 536870912, due to the overflow.
Indeed in bcache_device_init(), bcache_device->nr_stripes is limited in
range [1, INT_MAX]. Therefore all valid stripe numbers in bcache are
in range [0, bcache_dev->nr_stripes - 1].
This patch adds a upper limition check in offset_to_stripe(): the max
valid stripe number should be less than bcache_device->nr_stripes. If
the calculated stripe number from do_div() is equal to or larger than
bcache_device->nr_stripe, -EINVAL will be returned. (Normally nr_stripes
is less than INT_MAX, exceeding upper limitation doesn't mean overflow,
therefore -EOVERFLOW is not used as error code.)
This patch also changes nr_stripes' type of struct bcache_device from
'unsigned int' to 'int', and return value type of offset_to_stripe()
from 'unsigned int' to 'int', to match their exact data ranges.
All locations where bcache_device->nr_stripes and offset_to_stripe() are
referenced also get updated for the above type change.
Reported-and-tested-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1783075
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For some block devices which large capacity (e.g. 8TB) but small io_opt
size (e.g. 8 sectors), in bcache_device_init() the stripes number calcu-
lated by,
DIV_ROUND_UP_ULL(sectors, d->stripe_size);
might be overflow to the unsigned int bcache_device->nr_stripes.
This patch uses the uint64_t variable to store DIV_ROUND_UP_ULL()
and after the value is checked to be available in unsigned int range,
sets it to bache_device->nr_stripes. Then the overflow is avoided.
Reported-and-tested-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1783075
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove unneeded variable i in bch_dirty_init_thread().
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Using for_each_clear_bit() to simplify the code.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are some meta data of bcache are allocated by multiple pages,
and they are used as bio bv_page for I/Os to the cache device. for
example cache_set->uuids, cache->disk_buckets, journal_write->data,
bset_tree->data.
For such meta data memory, all the allocated pages should be treated
as a single memory block. Then the memory management and underlying I/O
code can treat them more clearly.
This patch adds __GFP_COMP flag to all the location allocating >0 order
pages for the above mentioned meta data. Then their pages are treated
as compound pages now.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
registraion -> registration
Fixes: 0c8d3fceade2 ("bcache: configure the asynchronous registertion to be experimental")
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Coly Li <colyli@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The EFI platform firmware fallback would clobber any pre-allocated
buffers. Instead, correctly refuse to reallocate when too small (as
already done in the sysfs fallback), or perform allocation normally
when needed.
Fixes: e4c2c0ff00ec ("firmware: Add new platform fallback mechanism and firmware_request_platform()")
Cc: stable@vger.kernel.org
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200724213640.389191-4-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On non-EFI systems, it wasn't possible to test the platform firmware
loader because it will have never set "checked_fw" during __init.
Instead, allow the test code to override this check. Additionally split
the declarations into a private header file so it there is greater
enforcement of the symbol visibility.
Fixes: 548193cba2a7 ("test_firmware: add support for firmware_request_platform")
Cc: stable@vger.kernel.org
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200724213640.389191-2-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixed 2 issues with the usage of skb_cow in LAPB drivers
"lapbether" and "hdlc_x25":
1) After skb_cow fails, kfree_skb should be called to drop a reference
to the skb. But in both drivers, kfree_skb is not called.
2) skb_cow should be called before skb_push so that is can ensure the
safety of skb_push. But in "lapbether", it is incorrectly called after
skb_push.
More details about these 2 issues:
1) The behavior of calling kfree_skb on failure is also the behavior of
netif_rx, which is called by this function with "return netif_rx(skb);".
So this function should follow this behavior, too.
2) In "lapbether", skb_cow is called after skb_push. This results in 2
logical issues:
a) skb_push is not protected by skb_cow;
b) An extra headroom of 1 byte is ensured after skb_push. This extra
headroom has no use in this function. It also has no use in the
upper-layer function that this function passes the skb to
(x25_lapb_receive_frame in net/x25/x25_dev.c).
So logically skb_cow should instead be called before skb_push.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some of the chips in the mv88e6xxx family don't support jumbo
configuration per port. But they do have a chip-wide max frame size that
can be used. Use this to approximate the behaviour of configuring a port
based MTU.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MV88E6190 and MV88E6190X both support per port jumbo configuration
just like the other GE switches. Install the appropriate ops.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MV88E6097 chip does not support configuring jumbo frames. Prior to
commit 5f4366660d65 only the 6352, 6351, 6165 and 6320 chips configured
jumbo mode. The refactor accidentally added the function for the 6097.
Remove the erroneous function pointer assignment.
Fixes: 5f4366660d65 ("net: dsa: mv88e6xxx: Refactor setting of jumbo frames")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into master
Pull PCI fixes from Bjorn Helgaas:
- Reject invalid IRQ 0 command line argument for virtio_mmio because
IRQ 0 now generates warnings (Bjorn Helgaas)
- Revert "PCI/PM: Assume ports without DLL Link Active train links in
100 ms", which broke nouveau (Bjorn Helgaas)
* tag 'pci-v5.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI/PM: Assume ports without DLL Link Active train links in 100 ms"
virtio-mmio: Reject invalid IRQ 0 command line argument
|
|
Remove casting the values returned by memory allocation function.
Coccinelle emits WARNING:
./drivers/net/ethernet/hisilicon/hix5hd2_gmac.c:1027:9-23: WARNING:
casting value returned by memory allocation function to (struct sg_desc *) is useless.
This issue was detected by using the Coccinelle software.
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.8
Second set of fixes for v5.8, and hopefully also the last. Three
important regressions fixed.
ath9k
* fix a regression which broke support for all ath9k usb devices
ath10k
* fix a regression which broke support for all QCA4019 AHB devices
iwlwifi
* fix a regression which broke support for some Killer Wireless-AC 1550 cards
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There's a potential race in xennet_remove(); this is what the driver is
doing upon unregistering a network device:
1. state = read bus state
2. if state is not "Closed":
3. request to set state to "Closing"
4. wait for state to be set to "Closing"
5. request to set state to "Closed"
6. wait for state to be set to "Closed"
If the state changes to "Closed" immediately after step 1 we are stuck
forever in step 4, because the state will never go back from "Closed" to
"Closing".
Make sure to check also for state == "Closed" in step 4 to prevent the
deadlock.
Also add a 5 sec timeout any time we wait for the bus state to change,
to avoid getting stuck forever in wait_event().
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2020-07-23
This series contains updates to ice driver only.
Jake refactors ice_discover_caps() to reduce the number of AdminQ calls
made. Splits ice_parse_caps() to separate functions to update function
and device capabilities separately to allow for updating outside of
initialization.
Akeem adds power management support.
Paul G refactors FC and FEC code to aid in restoring of PHY settings
on media insertion. Implements lenient mode and link override support.
Adds link debug info and formats existing debug info to be more
readable. Adds support to check and report additional autoneg
capabilities. Implements the capability to detect media cage in order to
differentiate AUI types as Direct Attach or backplane.
Bruce implements Total Port Shutdown for devices that support it.
Lev renames low_power_ctrl field to lower_power_ctrl_an to be more
descriptive of the field.
Doug reports AOC types as media type fiber.
Paul S adds code to handle 1G SGMII PHY type.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
drivers/isdn/mISDN/socket.c: In function ‘data_sock_setsockopt’:
./include/linux/kern_levels.h:5:18: warning: format ‘%p’ expects argument of type ‘void *’, but argument 6 has type ‘sockptr_t’ [-Wformat=]
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
| ^~~~~~
./include/linux/kern_levels.h:15:20: note: in expansion of macro ‘KERN_SOH’
15 | #define KERN_DEBUG KERN_SOH "7" /* debug-level messages */
| ^~~~~~~~
drivers/isdn/mISDN/socket.c:410:10: note: in expansion of macro ‘KERN_DEBUG’
410 | printk(KERN_DEBUG "%s(%p, %d, %x, %p, %d)\n", __func__, sock,
| ^~~~~~~~~~
drivers/isdn/mISDN/socket.c:410:38: note: format string is defined here
410 | printk(KERN_DEBUG "%s(%p, %d, %x, %p, %d)\n", __func__, sock,
| ~^
| |
| void *
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rework the remaining setsockopt code to pass a sockptr_t instead of a
plain user pointer. This removes the last remaining set_fs(KERNEL_DS)
outside of architecture specific code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154]
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
