summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-12-05dmaengine: cppi41: delete channel from pending list when stop channelBin Liu
The driver defines three states for a cppi channel. - idle: .chan_busy == 0 && not in .pending list - pending: .chan_busy == 0 && in .pending list - busy: .chan_busy == 1 && not in .pending list There are cases in which the cppi channel could be in the pending state when cppi41_dma_issue_pending() is called after cppi41_runtime_suspend() is called. cppi41_stop_chan() has a bug for these cases to set channels to idle state. It only checks the .chan_busy flag, but not the .pending list, then later when cppi41_runtime_resume() is called the channels in .pending list will be transitioned to busy state. Removing channels from the .pending list solves the problem. Fixes: 975faaeb9985 ("dma: cppi41: start tear down only if channel is busy") Cc: stable@vger.kernel.org # v3.15+ Signed-off-by: Bin Liu <b-liu@ti.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-12-05dmaengine: imx-sdma: use GFP_NOWAIT for dma descriptor allocationsLucas Stach
DMA buffer descriptors aren't allocated from atomic context, so they can use the less heavyweigth GFP_NOWAIT. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Robin Gong <yibin.gong@nxp.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-12-05dmaengine: imx-sdma: implement channel termination via workerLucas Stach
The dmaengine documentation states that device_terminate_all may be asynchronous and need not wait for the active transfers to stop. This allows us to move most of the functionality currently implemented in the sdma channel termination function to run in a worker, outside of any atomic context. Moving this out of atomic context has two benefits: we can now sleep while waiting for the channel to terminate, instead of busy waiting and the freeing of the dma descriptors happens with IRQs enabled, getting rid of a warning in the dma mapping code. As the termination is now async, we need to implement the device_synchronize dma engine function which simply waits for the worker to finish its execution. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Robin Gong <yibin.gong@nxp.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-12-05Revert "dmaengine: imx-sdma: alloclate bd memory from dma pool"Lucas Stach
This reverts commit fe5b85c656bc. The SDMA engine needs the descriptors to be contiguous in memory. As the dma pool API is only able to provide a single descriptor per alloc invocation there is no guarantee that multiple descriptors satisfy this requirement. Also the code in question is broken as it only allocates memory for a single descriptor, without looking at the number of descriptors required for the transfer, leading to out-of-bounds accesses when the descriptors are written. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Robin Gong <yibin.gong@nxp.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-12-05Revert "dmaengine: imx-sdma: Use GFP_NOWAIT for dma allocations"Lucas Stach
This reverts commit c1199875d327, as this depends on another commit that is going to be reverted. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Robin Gong <yibin.gong@nxp.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-12-04thermal: bcm2835: Switch to SPDX identifierStefan Wahren
Adopt the SPDX license identifier headers to ease license compliance management. Cc: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-04thermal: armada: fix legacy resource fixupRussell King
When the armada thermal module is inserted, removed and then reinserted, the system panics as per the messages below. The reason is that "edit" a live resource in the resource tree twice, and end up with it pointing to some other hardware. Editing live resources (resources that are part of the registered resource tree) is not permissible - the resource tree is an ordered set of resources, sorted by start address, and when a new resource is inserted, it is validated that it (a) fits within its parent resource and (b) does not overlap a neighbouring resource. Get rid of this resource editing. We can instead adjust the return value from ioremap() as ioremap() deals with the creation of page- based mappings - provided the adjustment does not cross a page boundary. SError Interrupt on CPU1, code 0xbf000000 -- SError CPU: 1 PID: 2749 Comm: modprobe Not tainted 4.19.0+ #175 Hardware name: Marvell 8040 MACCHIATOBin Double shot (DT) pstate: 20400085 (nzCv daIf +PAN -UAO) pc : regmap_mmio_read+0x3c/0x60 lr : regmap_mmio_read+0x3c/0x60 sp : ffffff800d453900 x29: ffffff800d453900 x28: ffffff800096a1d0 x27: 0000000000000100 x26: ffffff80009696d8 x25: ffffff8000969000 x24: ffffffc13a588918 x23: ffffffc13a9a28a8 x22: ffffff800d4539dc x21: 0000000000000084 x20: ffffff800d4539dc x19: ffffffc13a5d5480 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000030 x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f x9 : 0000000000000000 x8 : ffffffc13a5d5a80 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffffff800851be70 x2 : ffffff800851bd60 x1 : ffffff800d492ff8 x0 : 0000000000000000 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 1 PID: 2749 Comm: modprobe Not tainted 4.19.0+ #175 Hardware name: Marvell 8040 MACCHIATOBin Double shot (DT) Call trace: dump_backtrace+0x0/0x158 show_stack+0x14/0x1c dump_stack+0x90/0xb0 panic+0x128/0x298 print_tainted+0x0/0xa8 arm64_serror_panic+0x74/0x80 do_serror+0x5c/0xb8 el1_error+0xb4/0x144 regmap_mmio_read+0x3c/0x60 _regmap_bus_reg_read+0x18/0x20 _regmap_read+0x64/0x180 regmap_read+0x44/0x6c armada_ap806_init+0x24/0x5c [armada_thermal] armada_thermal_probe+0x2c8/0x37c [armada_thermal] platform_drv_probe+0x4c/0xb0 really_probe+0x21c/0x2b4 driver_probe_device+0x58/0xfc __driver_attach+0xd4/0xd8 bus_for_each_dev+0x50/0xa0 driver_attach+0x20/0x28 bus_add_driver+0x1c4/0x228 driver_register+0x6c/0x124 __platform_driver_register+0x4c/0x54 armada_thermal_driver_init+0x20/0x1000 [armada_thermal] do_one_initcall+0x30/0x204 do_init_module+0x5c/0x1d4 load_module+0x1a88/0x212c __se_sys_finit_module+0xa0/0xac __arm64_sys_finit_module+0x1c/0x24 el0_svc_common+0x94/0xf0 el0_svc_handler+0x24/0x80 el0_svc+0x8/0x3c0 SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x0,21806000 Memory Limit: none Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Tested-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-04net: mvpp2: fix phylink handling of invalid PHY modesBaruch Siach
The .validate phylink callback should empty the supported bitmap when the interface mode is invalid. Cc: Maxime Chevallier <maxime.chevallier@bootlin.com> Cc: Antoine Tenart <antoine.tenart@bootlin.com> Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-04net: mvpp2: fix detection of 10G SFP modulesBaruch Siach
The mvpp2_phylink_validate() relies on the interface field of phylink_link_state to determine valid link modes. However, when called from phylink_sfp_module_insert() this field in not initialized. The default switch case then excludes 10G link modes. This allows 10G SFP modules that are detected correctly to be configured at max rate of 2.5G. Catch the uninitialized PHY mode case, and allow 10G rates. Fixes: d97c9f4ab000b ("net: mvpp2: 1000baseX support") Cc: Maxime Chevallier <maxime.chevallier@bootlin.com> Cc: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-04thermal: armada: fix legacy validity test senseRussell King
Commit 8c0e64ac4075 ("thermal: armada: get rid of the ->is_valid() pointer") removed the unnecessary indirection through a function pointer, but in doing so, also removed the negation operator too: - if (priv->data->is_valid && !priv->data->is_valid(priv)) { + if (armada_is_valid(priv)) { which results in: armada_thermal f06f808c.thermal: Temperature sensor reading not valid armada_thermal f2400078.thermal: Temperature sensor reading not valid armada_thermal f4400078.thermal: Temperature sensor reading not valid at boot, or whenever the "temp" sysfs file is read. Replace the negation operator. Fixes: 8c0e64ac4075 ("thermal: armada: get rid of the ->is_valid() pointer") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-04ethernet: fman: fix wrong of_node_put() in probe functionNicolas Saenz Julienne
After getting a reference to the platform device's of_node the probe function ends up calling of_find_matching_node() using the node as an argument. The function takes care of decreasing the refcount on it. We are then incorrectly decreasing the refcount on that node again. This patch removes the unwarranted call to of_node_put(). Fixes: 414fd46e7762 ("fsl/fman: Add FMan support") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-04drm/amd/display: Fix overflow/truncation from strncpy.Nicholas Kazlauskas
[Why] New GCC warnings for stringop-truncation and stringop-overflow help catch common misuse of strncpy. This patch suppresses these warnings by fixing bugs identified by them. [How] Since the parameter passed for name in amdpgu_dm_create_common_mode has no fixed length, if the string is >= DRM_DISPLAY_MODE_LEN then mode->name will not be null-terminated. The truncation in fill_audio_info won't actually occur (and the string will be null-terminated since the buffer is initialized to zero), but the warning can be suppressed by using the proper buffer size. This patch fixes both issues by using the real size for the buffer and making use of strscpy (which always terminates). Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-04drm/amd/powerplay: improve OD code robustnesstianci yin
add protection code to avoid lower frequency trigger over drive. Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Tianci Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-04drm/amdgpu: enlarge maximum waiting time of KIQwentalou
KIQ in VF’s init delayed by another VF’s reset, which would cause late_init failed occasionally. MAX_KIQ_REG_TRY enlarged from 20 to 80 would fix this issue. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Wentao Lou <Wentao.Lou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-04block: only allow polling if a poll queue_map existsChristoph Hellwig
This avoids having to have differnet mq_ops for different setups with or without poll queues. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04nvme-mpath: remove I/O polling supportChristoph Hellwig
The ->poll_fn has been stale for a while, as a lot of places check for mq ops. But there is no real point in it anyway, as we don't even use the multipath code for subsystems without multiple ports, which is usually what we do high performance I/O to. If it really becomes an issue we should rework the nvme code to also skip the multipath code for any private namespace, even if that could mean some trouble when rescanning. Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04nvme-rdma: remove I/O polling supportChristoph Hellwig
The code was always a bit of a hack that digs far too much into RDMA core internals. Lets kick it out and reimplement proper dedicated poll queues as needed. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04nvme-pci: remove the CQ lock for interrupt driven queuesChristoph Hellwig
Now that we can't poll regular, interrupt driven I/O queues there is almost nothing that can race with an interrupt. The only possible other contexts polling a CQ are the error handler and queue shutdown, and both are so far off in the slow path that we can simply use the big hammer of disabling interrupts. With that we can stop taking the cq_lock for normal queues. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04nvme-pci: don't poll from irq context when deleting queuesChristoph Hellwig
This is the last place outside of nvme_irq that handles CQEs from interrupt context, and thus is in the way of removing the cq_lock for normal queues, and avoiding lockdep warnings on the poll queues, for which we already take it without IRQ disabling. Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04nvme-pci: refactor nvme_disable_io_queuesChristoph Hellwig
Pass the opcode for the delete SQ/CQ command as an argument instead of the somewhat confusing pass loop. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04nvme-pci: consolidate code for polling non-dedicated queuesChristoph Hellwig
We have three places that can poll for I/O completions on a normal interrupt-enabled queue. All of them are in slow path code, so consolidate them to a single helper that uses spin_lock_irqsave and removes the fast path cqe_pending check. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04nvme-pci: only allow polling with separate poll queuesChristoph Hellwig
This will allow us to simplify both the regular NVMe interrupt handler and the upcoming aio poll code. In addition to that the separate queues are generally a good idea for performance reasons. Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04nvme-pci: cleanup SQ allocation a bitChristoph Hellwig
Use a bit flag to mark if the SQ was allocated from the CMB, and clean up the surrounding code a bit. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04nvme-pci: use atomic bitops to mark a queue enabledChristoph Hellwig
This gets rid of all the messing with cq_vector and the ->polled field by using an atomic bitop to mark the queue enabled or not. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04block: move queues types to the block layerChristoph Hellwig
Having another indirect all in the fast path doesn't really help in our post-spectre world. Also having too many queue type is just going to create confusion, so I'd rather manage them centrally. Note that the queue type naming and ordering changes a bit - the first index now is the default queue for everything not explicitly marked, the optional ones are read and poll queues. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04phy: Revert toggling reset changes.David S. Miller
This reverts: ef1b5bf506b1 ("net: phy: Fix not to call phy_resume() if PHY is not attached") 8c85f4b81296 ("net: phy: micrel: add toggling phy reset if PHY is not attached") Andrew Lunn informs me that there are alternative efforts underway to fix this more properly. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Mostly new IDs for Elan/Synaptics touchpads, plus a few small fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: omap-keypad - fix keyboard debounce configuration Input: xpad - quirk all PDP Xbox One gamepads Input: synaptics - enable SMBus for HP 15-ay000 Input: synaptics - add PNP ID for ThinkPad P50 to SMBus Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR Input: elan_i2c - add support for ELAN0621 touchpad Input: hyper-v - fix wakeup from suspend-to-idle Input: atkbd - clean up indentation issue Input: st1232 - convert to SPDX identifiers Input: migor_ts - convert to SPDX identifiers Input: dt-bindings - fix a typo in file input-reset.txt Input: cros_ec_keyb - fix button/switch capability reports Input: elan_i2c - add ELAN0620 to the ACPI table Input: matrix_keypad - check for errors from of_get_named_gpio()
2018-12-04Merge tag 'v4.20-rc5' into for-4.21/blockJens Axboe
Pull in v4.20-rc5, solving a conflict we'll otherwise get in aio.c and also getting the merge fix that went into mainline that users are hitting testing for-4.21/block and/or for-next. * tag 'v4.20-rc5': (664 commits) Linux 4.20-rc5 PCI: Fix incorrect value returned from pcie_get_speed_cap() MAINTAINERS: Update linux-mips mailing list address ocfs2: fix potential use after free mm/khugepaged: fix the xas_create_range() error path mm/khugepaged: collapse_shmem() do not crash on Compound mm/khugepaged: collapse_shmem() without freezing new_page mm/khugepaged: minor reorderings in collapse_shmem() mm/khugepaged: collapse_shmem() remember to clear holes mm/khugepaged: fix crashes due to misaccounted holes mm/khugepaged: collapse_shmem() stop if punched or truncated mm/huge_memory: fix lockdep complaint on 32-bit i_size_read() mm/huge_memory: splitting set mapping+index before unfreeze mm/huge_memory: rename freeze_page() to unmap_page() initramfs: clean old path before creating a hardlink kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace psi: make disabling/enabling easier for vendor kernels proc: fixup map_files test on arm debugobjects: avoid recursive calls with kmemleak userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set ...
2018-12-04drm/fb-helper: Fix typo in parameter descriptionWei Yongjun
Fix typo in parameter description. Fixes: 4be9bd10e22d ("drm/fb_helper: Allow leaking fbdev smem_start") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/1543905135-35293-1-git-send-email-weiyongjun1@huawei.com
2018-12-03net/mlx4_en: Fix build break when CONFIG_INET is offSaeed Mahameed
MLX4_EN depends on NETDEVICES, ETHERNET and INET Kconfigs. Make sure they are listed in MLX4_EN Kconfig dependencies. This fixes the following build break: drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: ‘struct iphdr’ declared inside parameter list [enabled by default] struct iphdr *iph) ^ drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/ethernet/mellanox/mlx4/en_rx.c: In function ‘get_fixed_ipv4_csum’: drivers/net/ethernet/mellanox/mlx4/en_rx.c:586:20: error: dereferencing pointer to incomplete type _u8 ipproto = iph->protocol; Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net/mlx4_en: Change min MTU size to ETH_MIN_MTUEran Ben Elisha
NIC driver minimal MTU size shall be set to ETH_MIN_MTU, as defined in the RFC791 and in the network stack. Remove old mlx4_en only define for it, which was set to wrong value. Fixes: b80f71f5816f ("ethernet/mellanox: use core min/max MTU checking") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03Revert "PCI/ASPM: Do not initialize link state when aspm_disabled is set"Bjorn Helgaas
This reverts commit 17c91487364fb33797ed84022564ee7544ac4945. Rafael found that this commit broke the SD card reader in his Acer Aspire S5. Details of the problem are in the bugzilla below. Fixes: 17c91487364f ("PCI/ASPM: Do not initialize link state when aspm_disabled is set") Link: https://bugzilla.kernel.org/show_bug.cgi?id=201801 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-12-03mv88e6060: disable hardware level MAC learningAnderson Luiz Alves
Disable hardware level MAC learning because it breaks station roaming. When enabled it drops all frames that arrive from a MAC address that is on a different port at learning table. Signed-off-by: Anderson Luiz Alves <alacn1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03macvlan: return correct error valueMatteo Croce
A MAC address must be unique among all the macvlan devices with the same lower device. The only exception is the passthru [sic] mode, which shares the lower device address. When duplicate addresses are detected, EBUSY is returned when bringing the interface up: # ip link add macvlan0 link eth0 type macvlan # read addr </sys/class/net/eth0/address # ip link set macvlan0 address $addr # ip link set macvlan0 up RTNETLINK answers: Device or resource busy Use correct error code which is EADDRINUSE, and do the check also earlier, on address change: # ip link set macvlan0 address $addr RTNETLINK answers: Address already in use Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net/ibmvnic: Fix RTNL deadlock during device resetThomas Falcon
Commit a5681e20b541 ("net/ibmnvic: Fix deadlock problem in reset") made the change to hold the RTNL lock during driver reset but still calls netdev_notify_peers, which results in a deadlock. Instead, use call_netdevice_notifiers, which is functionally the same except that it does not take the RTNL lock again. Fixes: a5681e20b541 ("net/ibmnvic: Fix deadlock problem in reset") Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03vhost: fix IOTLB lockingJean-Philippe Brucker
Commit 78139c94dc8c ("net: vhost: lock the vqs one by one") moved the vq lock to improve scalability, but introduced a possible deadlock in vhost-iotlb. vhost_iotlb_notify_vq() now takes vq->mutex while holding the device's IOTLB spinlock. And on the vhost_iotlb_miss() path, the spinlock is taken while holding vq->mutex. Since calling vhost_poll_queue() doesn't require any lock, avoid the deadlock by not taking vq->mutex. Fixes: 78139c94dc8c ("net: vhost: lock the vqs one by one") Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net: phy: micrel: add toggling phy reset if PHY is not attachedYoshihiro Shimoda
This patch adds toggling phy reset if PHY is not attached. Otherwise, some boards (e.g. R-Car H3 Salvator-XS) cannot link up correctly if we do the following method: 1) Kernel boots by using initramfs. --> No open the nic, so phy_device_register() and phy_probe() deasserts the reset. 2) Kernel enters the suspend. --> So, keep the reset signal as deassert. --> On R-Car Salvator-XS board, unfortunately, the board power is turned off. 3) Kernel returns from suspend. 4) ifconfig eth0 up --> Then, since edge signal of the reset doesn't happen, it cannot link up. 5) ifconfig eth0 down 6) ifconfig eth0 up --> In this case, it can link up. Reported-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net: phy: Fix not to call phy_resume() if PHY is not attachedYoshihiro Shimoda
This patch fixes an issue that mdio_bus_phy_resume() doesn't call phy_resume() if the PHY is not attached. Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03tun: remove skb access after netif_receive_skbPrashant Bhole
In tun.c skb->len was accessed while doing stats accounting after a call to netif_receive_skb. We can not access skb after this call because buffers may be dropped. The fix for this bug would be to store skb->len in local variable and then use it after netif_receive_skb(). IMO using xdp data size for accounting bytes will be better because input for tun_xdp_one() is xdp_buff. Hence this patch: - fixes a bug by removing skb access after netif_receive_skb() - uses xdp data size for accounting bytes [613.019057] BUG: KASAN: use-after-free in tun_sendmsg+0x77c/0xc50 [tun] [613.021062] Read of size 4 at addr ffff8881da9ab7c0 by task vhost-1115/1155 [613.023073] [613.024003] CPU: 0 PID: 1155 Comm: vhost-1115 Not tainted 4.20.0-rc3-vm+ #232 [613.026029] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [613.029116] Call Trace: [613.031145] dump_stack+0x5b/0x90 [613.032219] print_address_description+0x6c/0x23c [613.034156] ? tun_sendmsg+0x77c/0xc50 [tun] [613.036141] kasan_report.cold.5+0x241/0x308 [613.038125] tun_sendmsg+0x77c/0xc50 [tun] [613.040109] ? tun_get_user+0x1960/0x1960 [tun] [613.042094] ? __isolate_free_page+0x270/0x270 [613.045173] vhost_tx_batch.isra.14+0xeb/0x1f0 [vhost_net] [613.047127] ? peek_head_len.part.13+0x90/0x90 [vhost_net] [613.049096] ? get_tx_bufs+0x5a/0x2c0 [vhost_net] [613.051106] ? vhost_enable_notify+0x2d8/0x420 [vhost] [613.053139] handle_tx_copy+0x2d0/0x8f0 [vhost_net] [613.053139] ? vhost_net_buf_peek+0x340/0x340 [vhost_net] [613.053139] ? __mutex_lock+0x8d9/0xb30 [613.053139] ? finish_task_switch+0x8f/0x3f0 [613.053139] ? handle_tx+0x32/0x120 [vhost_net] [613.053139] ? mutex_trylock+0x110/0x110 [613.053139] ? finish_task_switch+0xcf/0x3f0 [613.053139] ? finish_task_switch+0x240/0x3f0 [613.053139] ? __switch_to_asm+0x34/0x70 [613.053139] ? __switch_to_asm+0x40/0x70 [613.053139] ? __schedule+0x506/0xf10 [613.053139] handle_tx+0xc7/0x120 [vhost_net] [613.053139] vhost_worker+0x166/0x200 [vhost] [613.053139] ? vhost_dev_init+0x580/0x580 [vhost] [613.053139] ? __kthread_parkme+0x77/0x90 [613.053139] ? vhost_dev_init+0x580/0x580 [vhost] [613.053139] kthread+0x1b1/0x1d0 [613.053139] ? kthread_park+0xb0/0xb0 [613.053139] ret_from_fork+0x35/0x40 [613.088705] [613.088705] Allocated by task 1155: [613.088705] kasan_kmalloc+0xbf/0xe0 [613.088705] kmem_cache_alloc+0xdc/0x220 [613.088705] __build_skb+0x2a/0x160 [613.088705] build_skb+0x14/0xc0 [613.088705] tun_sendmsg+0x4f0/0xc50 [tun] [613.088705] vhost_tx_batch.isra.14+0xeb/0x1f0 [vhost_net] [613.088705] handle_tx_copy+0x2d0/0x8f0 [vhost_net] [613.088705] handle_tx+0xc7/0x120 [vhost_net] [613.088705] vhost_worker+0x166/0x200 [vhost] [613.088705] kthread+0x1b1/0x1d0 [613.088705] ret_from_fork+0x35/0x40 [613.088705] [613.088705] Freed by task 1155: [613.088705] __kasan_slab_free+0x12e/0x180 [613.088705] kmem_cache_free+0xa0/0x230 [613.088705] ip6_mc_input+0x40f/0x5a0 [613.088705] ipv6_rcv+0xc9/0x1e0 [613.088705] __netif_receive_skb_one_core+0xc1/0x100 [613.088705] netif_receive_skb_internal+0xc4/0x270 [613.088705] br_pass_frame_up+0x2b9/0x2e0 [613.088705] br_handle_frame_finish+0x2fb/0x7a0 [613.088705] br_handle_frame+0x30f/0x6c0 [613.088705] __netif_receive_skb_core+0x61a/0x15b0 [613.088705] __netif_receive_skb_one_core+0x8e/0x100 [613.088705] netif_receive_skb_internal+0xc4/0x270 [613.088705] tun_sendmsg+0x738/0xc50 [tun] [613.088705] vhost_tx_batch.isra.14+0xeb/0x1f0 [vhost_net] [613.088705] handle_tx_copy+0x2d0/0x8f0 [vhost_net] [613.088705] handle_tx+0xc7/0x120 [vhost_net] [613.088705] vhost_worker+0x166/0x200 [vhost] [613.088705] kthread+0x1b1/0x1d0 [613.088705] ret_from_fork+0x35/0x40 [613.088705] [613.088705] The buggy address belongs to the object at ffff8881da9ab740 [613.088705] which belongs to the cache skbuff_head_cache of size 232 Fixes: 043d222f93ab ("tuntap: accept an array of XDP buffs through sendmsg()") Reviewed-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net: 8139cp: fix a BUG triggered by changing mtu with network trafficSu Yanjun
When changing mtu many times with traffic, a bug is triggered: [ 1035.684037] kernel BUG at lib/dynamic_queue_limits.c:26! [ 1035.684042] invalid opcode: 0000 [#1] SMP [ 1035.684049] Modules linked in: loop binfmt_misc 8139cp(OE) macsec tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag tcp_lp fuse uinput xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter devlink ip6_tables iptable_filter sunrpc snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep ppdev snd_seq iosf_mbi crc32_pclmul parport_pc snd_seq_device ghash_clmulni_intel parport snd_pcm aesni_intel joydev lrw snd_timer virtio_balloon sg gf128mul glue_helper ablk_helper cryptd snd soundcore i2c_piix4 pcspkr ip_tables xfs libcrc32c sr_mod sd_mod cdrom crc_t10dif crct10dif_generic ata_generic [ 1035.684102] pata_acpi virtio_console qxl drm_kms_helper syscopyarea sysfillrect sysimgblt floppy fb_sys_fops crct10dif_pclmul crct10dif_common ttm crc32c_intel serio_raw ata_piix drm libata 8139too virtio_pci drm_panel_orientation_quirks virtio_ring virtio mii dm_mirror dm_region_hash dm_log dm_mod [last unloaded: 8139cp] [ 1035.684132] CPU: 9 PID: 25140 Comm: if-mtu-change Kdump: loaded Tainted: G OE ------------ T 3.10.0-957.el7.x86_64 #1 [ 1035.684134] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 1035.684136] task: ffff8f59b1f5a080 ti: ffff8f5a2e32c000 task.ti: ffff8f5a2e32c000 [ 1035.684149] RIP: 0010:[<ffffffffba3a40d0>] [<ffffffffba3a40d0>] dql_completed+0x180/0x190 [ 1035.684162] RSP: 0000:ffff8f5a75483e50 EFLAGS: 00010093 [ 1035.684162] RAX: 00000000000000c2 RBX: ffff8f5a6f91c000 RCX: 0000000000000000 [ 1035.684162] RDX: 0000000000000000 RSI: 0000000000000184 RDI: ffff8f599fea3ec0 [ 1035.684162] RBP: ffff8f5a75483ea8 R08: 00000000000000c2 R09: 0000000000000000 [ 1035.684162] R10: 00000000000616ef R11: ffff8f5a75483b56 R12: ffff8f599fea3e00 [ 1035.684162] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000184 [ 1035.684162] FS: 00007fa8434de740(0000) GS:ffff8f5a75480000(0000) knlGS:0000000000000000 [ 1035.684162] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1035.684162] CR2: 00000000004305d0 CR3: 000000024eb66000 CR4: 00000000001406e0 [ 1035.684162] Call Trace: [ 1035.684162] <IRQ> [ 1035.684162] [<ffffffffc08cbaf8>] ? cp_interrupt+0x478/0x580 [8139cp] [ 1035.684162] [<ffffffffba14a294>] __handle_irq_event_percpu+0x44/0x1c0 [ 1035.684162] [<ffffffffba14a442>] handle_irq_event_percpu+0x32/0x80 [ 1035.684162] [<ffffffffba14a4cc>] handle_irq_event+0x3c/0x60 [ 1035.684162] [<ffffffffba14db29>] handle_fasteoi_irq+0x59/0x110 [ 1035.684162] [<ffffffffba02e554>] handle_irq+0xe4/0x1a0 [ 1035.684162] [<ffffffffba7795dd>] do_IRQ+0x4d/0xf0 [ 1035.684162] [<ffffffffba76b362>] common_interrupt+0x162/0x162 [ 1035.684162] <EOI> [ 1035.684162] [<ffffffffba0c2ae4>] ? __wake_up_bit+0x24/0x70 [ 1035.684162] [<ffffffffba1e46f5>] ? do_set_pte+0xd5/0x120 [ 1035.684162] [<ffffffffba1b64fb>] unlock_page+0x2b/0x30 [ 1035.684162] [<ffffffffba1e4879>] do_read_fault.isra.61+0x139/0x1b0 [ 1035.684162] [<ffffffffba1e9134>] handle_pte_fault+0x2f4/0xd10 [ 1035.684162] [<ffffffffba1ebc6d>] handle_mm_fault+0x39d/0x9b0 [ 1035.684162] [<ffffffffba76f5e3>] __do_page_fault+0x203/0x500 [ 1035.684162] [<ffffffffba76f9c6>] trace_do_page_fault+0x56/0x150 [ 1035.684162] [<ffffffffba76ef42>] do_async_page_fault+0x22/0xf0 [ 1035.684162] [<ffffffffba76b788>] async_page_fault+0x28/0x30 [ 1035.684162] Code: 54 c7 47 54 ff ff ff ff 44 0f 49 ce 48 8b 35 48 2f 9c 00 48 89 77 58 e9 fe fe ff ff 0f 1f 80 00 00 00 00 41 89 d1 e9 ef fe ff ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 55 8d 42 ff 48 [ 1035.684162] RIP [<ffffffffba3a40d0>] dql_completed+0x180/0x190 [ 1035.684162] RSP <ffff8f5a75483e50> It's not the same as in 7fe0ee09 patch described. As 8139cp uses shared irq mode, other device irq will trigger cp_interrupt to execute. cp_change_mtu -> cp_close -> cp_open In cp_close routine just before free_irq(), some interrupt may occur. In my environment, cp_interrupt exectutes and IntrStatus is 0x4, exactly TxOk. That will cause cp_tx to wake device queue. As device queue is started, cp_start_xmit and cp_open will run at same time which will cause kernel BUG. For example: [#] for tx descriptor At start: [#][#][#] num_queued=3 After cp_init_hw->cp_start_hw->netdev_reset_queue: [#][#][#] num_queued=0 When 8139cp starts to work then cp_tx will check num_queued mismatchs the complete_bytes. The patch will check IntrMask before check IntrStatus in cp_interrupt. When 8139cp interrupt is disabled, just return. Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net: phy: don't allow __set_phy_supported to add unsupported modesHeiner Kallweit
Currently __set_phy_supported allows to add modes w/o checking whether the PHY supports them. This is wrong, it should never add modes but only remove modes we don't want to support. The commit marked as fixed didn't do anything wrong, it just copied existing functionality to the helper which is being fixed now. Fixes: f3a6bd393c2c ("phylib: Add phy_set_max_speed helper") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03libata: whitelist all SAMSUNG MZ7KM* solid-state disksJuha-Matti Tilli
These devices support read zero after trim (RZAT), as they advertise to the OS. However, the OS doesn't believe the SSDs unless they are explicitly whitelisted. Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Juha-Matti Tilli <juha-matti.tilli@iki.fi> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-03Input: omap-keypad - fix keyboard debounce configurationTony Lindgren
I noticed that the Android v3.0.8 kernel on droid4 is using different keypad values from the mainline kernel and does not have issues with keys occasionally being stuck until pressed again. Turns out there was an earlier patch posted to fix this as "Input: omap-keypad: errata i689: Correct debounce time", but it was never reposted to fix use macros for timing calculations. This updated version is using macros, and also fixes the use of the input clock rate to use 32768KiHz instead of 32000KiHz. And we want to use the known good Android kernel values of 3 and 6 instead of 2 and 6 in the earlier patch. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: xpad - quirk all PDP Xbox One gamepadsCameron Gutman
Since we continue to find tons of new variants [0,1,2,3,4,5,6] that need the PDP quirk, let's just quirk all devices from PDP. [0]: https://github.com/paroj/xpad/pull/104 [1]: https://github.com/paroj/xpad/pull/105 [2]: https://github.com/paroj/xpad/pull/108 [3]: https://github.com/paroj/xpad/pull/109 [4]: https://github.com/paroj/xpad/pull/112 [5]: https://github.com/paroj/xpad/pull/115 [6]: https://github.com/paroj/xpad/pull/116 Fixes: e5c9c6a885fa ("Input: xpad - add support for PDP Xbox One controllers") Cc: stable@vger.kernel.org Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: synaptics - enable SMBus for HP 15-ay000Teika Kazura
SMBus works fine for the touchpad with id SYN3221, used in the HP 15-ay000 series, This device has been reported in these messages in the "linux-input" mailing list: * https://marc.info/?l=linux-input&m=152016683003369&w=2 * https://www.spinics.net/lists/linux-input/msg52525.html Reported-by: Nitesh Debnath <niteshkd1999@gmail.com> Reported-by: Teika Kazura <teika@gmx.com> Signed-off-by: Teika Kazura <teika@gmx.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: synaptics - add PNP ID for ThinkPad P50 to SMBusLyude Paul
Noticed the other day the trackpoint felt different on my P50, then realized it was because rmi4 wasn't loading for this machine automatically. Suspend/resume, hibernate, and everything else seem to work perfectly fine on here. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARRNoah Westervelt
Add ELAN061E to the ACPI table to support Elan touchpad found in Lenovo IdeaPad 330-15ARR. Signed-off-by: Noah Westervelt <nwestervelt@outlook.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: elan_i2c - add support for ELAN0621 touchpadAdam Wong
Added the ability to detect the ELAN0621 touchpad found in some Lenovo laptops. Signed-off-by: Adam Wong <adam@adamwong.me> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Merge tag 'media/v4.20-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - Revert a dt-bindings patch whose driver didn't make for 4.20 - fix a kernel oops at vicodec driver - fix a frame overflow at gspca with was causing regressions on some cameras, making them to not work - use the proper type for wait_queue head - make media request API compatible with 32-bit userspace on 64-bit kernel - fix a regression on Kernel 4.19 at dvb-pll - don't use SPDX headers yet for GFDL * tag 'media/v4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: mediactl docs: Fix licensing message media: dvb-pll: don't re-validate tuner frequencies media: dvb-pll: fix tuner frequency ranges media: Revert "media: dt-bindings: Document the Rockchip VPU bindings" media: gspca: fix frame overflow error media: vicodec: fix memchr() kernel oops media: cedrus: add action item to the TODO media: media-request: Add compat ioctl media: Use wait_queue_head_t for media_request
2018-12-03clk: zynqmp: Off by one in zynqmp_is_valid_clock()Dan Carpenter
The > comparison should be >= to prevent reading beyond the end of the clock[] array. (The clock[] array is allocated in zynqmp_clk_setup() and has clock_max_idx elements.) Fixes: 3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-22 17:54:37 +0000