summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-03-13mac80211: rename bss_conf timestamp to last_tsfJohannes Berg
This value is not really very useful by itself, yet some drivers (including iwlwifi until I can figure out what it should do) use it. At least rename it to "last_tsf" to indicate the meaning and add a note that it may be really old. I suspect the value may become useful combined with the rx_status->mactime, but we don't (yet) store that value and pass it to the driver. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13brmc80211: dont use jiffies for BSS TSFJohannes Berg
The cfg80211_inform_bss() timestamp argument is intended to be the TSF, not any form of host timestamp. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13mwifiex: rename fuctions and variables for better readabilityYogesh Ashok Powar
Renaming the long fuctions and variable names from 11n_rxreoder.c file to shorter ones for better readability. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13mwifiex: rearrange if and else blocks to avoid extra indentationYogesh Ashok Powar
This adds better readability. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13mwifiex: use usleep_range instead of udelayYogesh Ashok Powar
For the delay of 10 uSec or more usleep_range is prefered. Unlike udelay, sleep_range avoids large number of undesired interrupts. Ref Documentation/timers/timers-howto.txt Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13mwifiex: merge functions to derive cfp by chan & freq in oneYogesh Ashok Powar
There exist different functions with very long names to derive the channel frequency and power tripplet based on band and channel/freq. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13mwifiex: rearrange switch statementYogesh Ashok Powar
Fixing coding style by rearranging the switch statement Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13mwifiex: rename long function names to shorter onesYogesh Ashok Powar
This saves some space and adds better readability. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13b43: Load firmware from a work queue and not from the probe routineLarry Finger
Recent changes in udev are causing problems for drivers that load firmware from the probe routine. As b43 has such a structure, it must be changed. As this driver loads more than 1 firmware file, changing to the asynchronous routine request_firmware_nowait() would be complicated. In this implementation, the probe routine starts a queue that calls the firmware loading routines. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13b43legacy: Load firmware from work queue instead of from probe routineLarry Finger
Recent changes in udev are causing problems for drivers that load firmware from the probe routine. As b43legacy has such a structure, it must be changed. As this driver loads 3 or 4 firmware files, changing to the asynchronous routine request_firmware_nowait() would be complicated. In this implementation, the probe routine starts a work queue that calls the firmware loading routines. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13Merge branch 'for-linville' of git://github.com/kvalo/ath6klJohn W. Linville
2012-03-13Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-03-13xenbus: don't free other end details too earlyJan Beulich
The individual drivers' remove functions could legitimately attempt to access this information (for logging messages if nothing else). Note that I did not in fact observe a problem anywhere, but I came across this while looking into the reasons for what turned out to need the fix at https://lkml.org/lkml/2012/3/5/336 to vsprintf(). Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-13x86, acpi, tboot: Have a ACPI os prepare sleep instead of calling tboot_sleep.Tang Liang
The ACPI suspend path makes a call to tboot_sleep right before it writes the PM1A, PM1B values. We replace the direct call to tboot via an registration callback similar to __acpi_register_gsi. CC: Len Brown <len.brown@intel.com> Acked-by: Joseph Cihula <joseph.cihula@intel.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> [v1: Added __attribute__ ((unused))] [v2: Introduced a wrapper instead of changing tboot_sleep return values] [v3: Added return value AE_CTRL_SKIP for acpi_os_sleep_prepare] Signed-off-by: Tang Liang <liang.tang@oracle.com> [v1: Fix compile issues on IA64 and PPC64] [v2: Fix where __acpi_os_prepare_sleep==NULL and did not go in sleep properly] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-13usb: host: xhci: add platform driver supportSebastian Andrzej Siewior
This adds a fairly simple xhci-platform driver support. Currently it is used by the dwc3 driver for supporting host mode. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-03-13sata_fsl: add support for interrupt coalsecing featureQiang Liu
Adds support for interrupt coalescing feature to reduce interrupt events. Provides a mechanism of adjusting coalescing count and timeout tick by sysfs at runtime, so that tradeoff of latency and CPU load can be made depending on different applications. Signed-off-by: Qiang Liu <qiang.liu@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-03-13ata/pata_arasan_cf: Add Hibernation supportViresh Kumar
This patch adds in Hibernation related callbacks. Also we don't really need to free DMA channel on suspend. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-03-13pata_legacy: correctly mask recovery field for HT6560BSergei Shtylyov
According to the HT6560H datasheet, the recovery timing field is 4-bit wide, with a value of 0 meaning 16 cycles. Correct obvious thinko in the recovery field mask. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-03-13ata_piix: IDE-mode SATA patch for Intel Lynx Point DeviceIDsSeth Heasley
This patch adds the IDE-mode SATA DeviceIDs for the Intel Lynx Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-03-13ahci: AHCI-mode SATA patch for Intel Lynx Point DeviceIDsSeth Heasley
This patch adds the AHCI-mode SATA DeviceIDs for the Intel Lynx Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-03-13xHCI: update sg tablesizeAndiry Xu
Update sg tablesize as we can expand the ring now. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: check enqueue pointer advance into dequeue segAndiry Xu
When a urb is submitted to xHCI driver, check if queueing the urb will make the enqueue pointer advance into dequeue seg and expand the ring if it occurs. This is to guarantee the safety of ring expansion. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: Allocate 2 segments for transfer ringAndiry Xu
Allocate 2 segments for transfer ring by default, so we can expand the ring when the enqueue pointer and dequeue pointer are in different segments. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: dynamic ring expansionAndiry Xu
If room_on_ring() check fails, try to expand the ring and check again. When expand a ring, use a cached ring or allocate new segments, link the original ring and the new ring or segments, update the original ring's segment numbers and the last segment pointer. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: set cycle state when allocate ringsAndiry Xu
In the past all the rings were allocated with cycle state equal to 1. Now the driver may expand an existing ring, and the new segments shall be allocated with the same cycle state as the old one. This affects ring allocation and cached ring re-initialization. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: factor out segments allocation and free functionAndiry Xu
Factor out the segments allocation and free part from ring allocation and free routines since driver may call them directly when try to expand a ring. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: count free TRBs on transfer ringAndiry Xu
In the past, the room_on_ring() check was implemented by walking all over the ring, which is wasteful and complicated. Count the number of free TRBs instead. The free TRBs number should be updated when enqueue/dequeue pointer is updated, or upon the completion of a set dequeue pointer command. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: store ring's last segment and segment numbersAndiry Xu
Store the ring's last segment pointer and number of segments for ring expansion usage. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13OMAPDSS: APPLY: fix clearing shadow dirty flag with manual updateTomi Valkeinen
Currently the shadow-dirty flags for manual update displays is cleared in the apply_irq_handler when an update has finished. This is not correct, as the shadow registers are taken into use (i.e. after that they are not dirty) when the update is started. Move the mgr_clear_shadow_dirty() call from apply_irq_handler to dss_mgr_start_update() to fix this. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-03-13ath6kl: fix debug.c file modeKalle Valo
Commit 7504a3e1 ("ath6kl: add padding to firmware log records") accidentally changed debug.c mode from 100644 to 100755. Revert that back to original. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-13ath6kl: use max_t() in ath6kl_cfg80211_connect()Kalle Valo
ath6kl/cfg80211.c:589: WARNING: max() should probably be max_t(u16, vif->listen_intvl_t, ATH6KL_MAX_WOW_LISTEN_INTL) Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-13ath6kl: fix open parenthesis alignment in ath6kl_sdio_suspend()Kalle Valo
ath6kl/sdio.c:875: CHECK: Alignment should match open parenthesis Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-13ath6kl: replace strict_strtoul() with kstrtoul()Kalle Valo
Recommended by checkpatch. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-13ath6kl: fix regression in ath6kl_upload_board_file()Kalle Valo
My patch 24fc32b3 ("ath6kl: add ath6kl_bmi_write_hi32()") caused a regression in ath6kl_upload_board_file() and the board_address variable was not properly initialised in some cases: ath6kl/init.c:1068:6: warning: ‘board_address’ may be used uninitialized in this function Most likely this broke ar6004 support but I can't test that right now. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-13hwmon: (w83627ehf) Fix temp2 source for W83627UHGJean Delvare
Properly set the source of temp2 for the W83627UHG. Also fix a comment right before that, and document the W83627UHG as reporting up to 3 temperatures. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-13iommu/tegra-gart: fix spin_unlock in map failure pathLucas Stach
This must have been messed up while merging, the intention was clearly to unlock there. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-03-13HID: tivo: add support for BT-version (0x1200)Jiri Kosina
Add support for BT-driven configuration of the TiVo remote. Reported-by: Joshua Dillon <jvdillon@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-13drm/nouveau: map first page of mmio early and determine chipset earlierBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-03-13drm/nvd0/disp: disconnect encoders before reprogramming themBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-03-13drm/nvd0/disp: move syncs/magic setup to or mode_setBen Skeggs
NVIDIA appear to do these around the same place they do the MODE_CTRL methods, and for DP at least we need to bash some extra bits in "syncs" to keep EVO happy. It's a bit of a guess as to the 6/8bpc, but i have no better idea yet. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-03-13drm/nouveau/dp: account for channel coding overhead in link trainingBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-03-13drm/nvd0/disp: fix dcb sor link matching in supervisor handlerBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-03-13drm/nvd0/disp: initial implementation of displayportBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-03-13drm/nouveau/dp: make dp dpms function common, call from sor code insteadBen Skeggs
GF119 will use this too. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-03-13drm/nv50/hwsq: some nv92 fixesMartin Peres
The shift from hwsq_data = 0x1400 to 0x080000 actually happened in nv94, not nv92 This fixes some reclocking issues on my newly acquired nv92 Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-03-13drm/nouveau/dp: move all nv50/sor-specific code out of nouveau_dp.cBen Skeggs
Off-chip encoders (which we don't support yet anyway), and newer chipsets (such as NVD9...), will need their own code for this. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-03-13drm/nouveau/dp: make functions for executing various bios tablesBen Skeggs
More code to do the same thing, but will make it easier to handle various changes that could possibly happen the the VBIOS tables. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-03-13drm/nouveau/pm: fix oops if chipset has no pm support at allBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-03-13drm/nouveau/bios: rework vbios shadowingBen Skeggs
Refactored to allow shadowing of VBIOS images longer than 64KiB, which allows us to pass the VBIOS checksum test on certain boards. There's also a workaround for reading the PROM VBIOS on some chipsets. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-03-13drm/nouveau/bios: attempt acpi rom fetch before pciromBen Skeggs
There's cards out there with completely messed up PCIROM images that have a perfectly valid signature.. Sigh! Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-22 10:24:14 +0000