| Age | Commit message (Collapse) | Author |
|---|
|
MPO video
[Why]
Pipes for MPO primary and overlay will be power down and power up during
plug/unplug external monitor while MPO video playback.
But the pipes were the same after plug/unplug and should not need to be
power down and power up or it will make page flip interrupt disabled and
cause hang issue.
[How]
Add pipe split change condition that not only check the top pipe pointer
but also check the index of top pipe if both top pipes are available.
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Need a way to retain default clock table to aid
the investigation into why 8k@30 display not
lighting up on dcn314
[How]
Use flag to prevent execution of bw_params helper
function and function for updating bw_bounding_box
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
During multi-vf executing benchmark (Luxmark) observed kiq error timeout.
It happenes because all of VFs do the tlb invalidation at the same time.
Although each VF has the invalidate register set, from hardware side
the invalidate requests are queue to execute.
[How]
In case of 12 VF increase timeout on 12*100ms
Signed-off-by: Dusica Milinkovic <Dusica.Milinkovic@amd.com>
Acked-by: Shaoyun Liu <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Increase width of some variables to avoid comparing integers of
different widths.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Some pixel clock values could cause HDMI TMDS SSCPs to be misaligned
between different HDMI lanes when using YCbCr420 10-bit pixel format.
BIOS functions for transmitter/encoder control take pixel clock in kHz
increments, whereas the function for setting the pixel clock is in 100Hz
increments. Setting pixel clock to a value that is not on a kHz boundary
will cause the issue.
[How]
Round pixel clock down to nearest kHz in 10/12-bpc cases.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This version brings along following fixes:
-Fix edp panel missing event
-Set ARGB16161616 pixel format to 26
-Fix dcn32 interger issue
-Clear optc underflow bit after ODM clock off
-Fix issue with stereo3D
-Fix DML2 lightup issue
-Correct DTBCLK for dcn314
-Revert for a regression
-Fix clocks and bugs in DML2
-Enable SubVP by defalut on DCN32 & DCN321
-Corret boundary condition for engin ID on DCN303
-Fix FRL encoder override registry key
-Fix VPG for dcn314 HPO
-Fix Linux compile-time warning
-Add new prefetch modes in DML for DCN32
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
pixel format addition
[WHY]
Limiting vscsdp_for_colorimetry for YCbCr420/BT2020 resulted in red/green
point failures in HDR10 DTN tests. The re-implementation of ARGB16161616
was to fix this however it did not actually fix this issue but a side effect of the
issue.
[HOW]
Change ARGB16161616 pixel format to 26.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Ethan Wellenreiter <Ethan.Wellenreiter@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The driver needs to set EnableGfxImu message parameter to tell the PMFW
to set the flag that enables the GFXOFF feature.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable AMD_CG_SUPPORT_IH_CG support.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This code has two bugs. If kfd_topology_device_by_proximity_domain()
failed on the first iteration through the loop then "cpu_link" is
uninitialized and should not be dereferenced.
The second bug is that we cannot dereference a list iterator when it
points to the list head. In other words, if we exit the
list_for_each_entry() loop exits without hitting a break then "cpu_link"
is not a valid pointer and should not be dereferenced.
Fix both of these problems by setting "cpu_link" to NULL when it is invalid
and non-NULL when it is valid. That makes it easier to test for
valid vs invalid.
Fixes: 0f28cca87e9a ("drm/amdkfd: Extend KFD device topology to surface peer-to-peer links")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is only one engine in sdma 6.0.1, the total number of
reserved queues should be 2, reflect this number in bitmap as well.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable AMD_CG_SUPPORT_ATHUB_MGCG and AMD_CG_SUPPORT_ATHUB_LS support.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable AMD_CG_SUPPORT_HDP_MGCG and AMD_CG_SUPPORT_HDP_LS support.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable AMD_CG_SUPPORT_MC_MGCG and AMD_CG_SUPPORT_MC_LS support.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ATHUB IP v3.0.1 in athub_v3_0_set_clockgating.
The regATHUB_MISC_CNTL has different offset for ATHUB IP v3.0.1,
so need to add IP version checking to use the right REG offset.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add set/get_clockgating for HDP IP v5.2.1.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add set/get_clockgating for MMHUB IP v3.0.1.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The pmfw has changed the driver interface version, so keep same with the
fw.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use the mm reference from the fence. This allows removing the
svm_bo->svms pointer, which was problematic because we cannot assume
that the struct kfd_process containing the svms is still allocated
without holding a refcount on the process.
Use mmget_not_zero to ensure the mm is still valid, and drop the svm_bo
reference if it isn't.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add mode1 support since it's missing on smu_v13_0_7
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add ih cg and hdp sd on smu_v13_0_7
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Without these, potential memory leak may be induced.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To avoid any potential memory leak.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some stability issues were reported with these features.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few fixes that came in since my pull request, the Meson fix is a
little large since it's fixing all possible cases of the problem that
was observed with the driver and clock API trying to share
configuration by integrating the device clocking fully with the clock
API rather than spot fixing the one instance that was observed"
* tag 'spi-fix-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: Drop Pratyush Yadav
spi: meson-spicc: add local pow2 clock ops to preserve rate between messages
MAINTAINERS: rectify entry for ARM/HPE GXP ARCHITECTURE
spi: spi.c: Add missing __percpu annotations in users of spi_statistics
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of small fixes that came in since my pull request, nothing
major here"
* tag 'regulator-fix-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Fix missing error return from regulator_bulk_get()
regulator: pca9450: Remove restrictions for regulator-name
|
|
When a tx_timeout fires, the PF attempts to recover by incrementally
resetting. First we try a PFR, then CORER and finally a GLOBR. If the
GLOBR fails, then we keep hitting the tx_timeout and incrementing the
recovery level and issuing dmesgs, which is both annoying to the user
and accomplishes nothing.
If the GLOBR fails, then we're pretty much totally hosed, and there's
not much else we can do to recover, so this makes it such that we just
kill the VSI and stop hitting the tx_timeout in such a case.
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix checksum offload on VXLAN tunnels.
In case, when mpls protocol is not used, set l4 header to transport
header of skb. This fixes case, when user tries to offload checksums
of VXLAN tunneled traffic.
Steps for reproduction (requires link partner with tunnels):
ip l s enp130s0f0 up
ip a f enp130s0f0
ip a a 10.10.110.2/24 dev enp130s0f0
ip l s enp130s0f0 mtu 1600
ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev \
enp130s0f0 dstport 4789
ip l s vxlan12_sut up
ip a a 20.10.110.2/24 dev vxlan12_sut
iperf3 -c 20.10.110.1 #should connect
Without this patch, TX descriptor was using wrong data, due to
l4 header pointing wrong address. NIC would then drop those packets
internally, due to incorrect TX descriptor data, which increased
GLV_TEPC register.
Fixes: b4fb2d33514a ("i40e: Add support for MPLS + TSO")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ib_umem_dmabuf_map_pages() returns 0 on success and -ERRNO on failure.
dma_resv_wait_timeout() uses a different scheme:
* Returns -ERESTARTSYS if interrupted, 0 if the wait timed out, or
* greater than zero on success.
This results in ib_umem_dmabuf_map_pages() being non-functional as a
positive return will be understood to be an error by drivers.
Fixes: f30bceab16d1 ("RDMA: use dma_resv_wait() instead of extracting the fence")
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/0-v1-d8f4e1fa84c8+17-rdma_dmabuf_fix_jgg@nvidia.com
Tested-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
QP0 in HW is used for CMDQ, and the rest is for RDMA QPs. So the actual
max_qp capacity reported to core should be max_qp (reported by HW) - 1.
So does max_cq.
Fixes: 155055771704 ("RDMA/erdma: Add verbs implementation")
Link: https://lore.kernel.org/all/20220810014320.88026-1-chengyou@linux.alibaba.com
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
This device is reported as using the RTL8188EUS chip.
It has the improbable USB ID of 0bda:ffef, which normally would belong
to Realtek, but this ID works for the reporter.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220814175027.2689-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
RDMA driver should get the MR key from FMR WR, not the MR structure passed
in.
Fixes: 155055771704 ("RDMA/erdma: Add verbs implementation")
Link: https://lore.kernel.org/r/20220810014320.88026-2-chengyou@linux.alibaba.com
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The old rtl8188eu module, removed in commit 55dfa29b43d2 ("staging:
rtl8188eu: remove rtl8188eu driver from staging dir") (Linux kernel
v5.15-rc1), required (through a MODULE_FIRMWARE call()) the
rtlwifi/rtl8188eufw.bin firmware file, which the new r8188eu driver no
longer requires.
I have tested a few RTL8188EUS-based Wi-Fi cards and, while supported by
both drivers, they do not work when using the new one and the firmware
wasn't manually loaded. According to Larry Finger, the module
maintainer, all such cards need the firmware and the driver should
depend on it (see the linked mails).
Add a proper MODULE_FIRMWARE() call, like it was done in the old driver.
Thanks to Greg Kroah-Hartman and Larry Finger for quick responses to my
questions.
Cc: stable <stable@kernel.org>
Link: https://answers.launchpad.net/ubuntu/+source/linux-meta-hwe-5.15/+question/702611
Link: https://lore.kernel.org/lkml/YukkBu3TNODO3or9@nx64de-df6d00/
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Link: https://lore.kernel.org/r/YulcdKfhA8dPQ78s@nx64de-df6d00
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 'c2ed5611afd7' has increased the cpl_t5_pass_accept_rpl{} structure
size by 8B to avoid roundup. cpl_t5_pass_accept_rpl{} is a HW specific
structure and increasing its size will lead to unwanted adapter errors.
Current commit reverts the cpl_t5_pass_accept_rpl{} back to its original
and allocates zeroed skb buffer there by avoiding the memset for iss field.
Reorder code to minimize chip type checks.
Fixes: c2ed5611afd7 ("iw_cxgb4: Use memset_startat() for cpl_t5_pass_accept_rpl")
Link: https://lore.kernel.org/r/20220809184118.2029-1-rahul.lakkireddy@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The cited commit allowed the driver to operate over HCAs that have
4 physical ports. Use the number of ports of the RDMA device in the for
loop instead of using the struct size.
Fixes: 4cd14d44b11d ("net/mlx5: Support devices with more than 2 ports")
Link: https://lore.kernel.org/r/a54a56c2ede16044a29d119209b35189c662ac72.1659944855.git.leonro@nvidia.com
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The iSER Initiator uses two types of receive buffers:
- one big login buffer posted by iser_post_recvl();
- several small message buffers posted by iser_post_recvm().
The login buffer is used at the login phase and full feature phase in
the discovery session. It may take a few requests and responses to
complete the login phase. The message buffers are only used in the
normal operational session at the full feature phase.
After the commit referred in the fixes line, the login operation fails
if the authentication is enabled. That happens because the Initiator
posts a small receive buffer after the first response from Target. So,
the next send operation fails because Target's second response does not
fit into the small receive buffer.
This commit adds additional checks to prevent posting small receive
buffers until the full feature phase.
Fixes: 39b169ea0d36 ("IB/iser: Fix RNR errors")
Link: https://lore.kernel.org/r/20220805060135.18493-1-sergeygo@nvidia.com
Signed-off-by: Sergey Gorenko <sergeygo@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
task_work
In ublk_queue_rq(), Assume current request is a re-issued request aborted
previously in monitor_work because the ubq_daemon(ioucmd's task) is
PF_EXITING. For this request, we cannot call
io_uring_cmd_complete_in_task() anymore because at that moment io_uring
context may be freed in case that no inflight ioucmd exists. Otherwise,
we may cause null-deref in ctx->fallback_work.
Add a check on UBLK_IO_FLAG_ABORTED to prevent the above situation. This
check is safe and makes sense.
Note: monitor_work sets UBLK_IO_FLAG_ABORTED and ends this request
(releasing the tag). Then the request is restarted(allocating the tag)
and we are here. Since releasing/allocating a tag implies smp_mb(),
finding UBLK_IO_FLAG_ABORTED guarantees that here is a re-issued request
aborted previously.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220815023633.259825-4-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since __ublk_rq_task_work always fails requests immediately during
exiting, __ublk_fail_req() is only called from abort context during
exiting. So lock is unnecessary.
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220815023633.259825-3-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace direct check on PF_EXITING in __ublk_rq_task_work() by the
existing wrapper. Also inline ubq_daemon_is_dying().
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220815023633.259825-2-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix variable names in some kerneldocs, naming in others.
Add kerneldocs for struct vring_desc and vring_interrupt.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Message-Id: <20220810094004.1250-2-ricardo.canuelo@collabora.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
|
|
This reverts commit a10fba0377145fccefea4dc4dd5915b7ed87e546: the
proposed API isn't supported on all transports but no
effort was made to address this.
It might not be hard to fix if we want to: maybe just
rename size to size_hint and make sure legacy
transports ignore the hint.
But it's not sure what the benefit is in any case, so
let's drop it.
Fixes: a10fba037714 ("virtio: find_vqs() add arg sizes")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220816053602.173815-8-mst@redhat.com>
|
|
This reverts commit 99e8927d8a4da8eb8a8a5904dc13a3156be8e7c0:
proposed API isn't supported on all transports but no
effort was made to address this.
It might not be hard to fix if we want to: maybe just rename size to
size_hint and make sure legacy transports ignore the hint.
But it's not sure what the benefit is in any case, so let's drop it.
Fixes: 99e8927d8a4d ("virtio_vdpa: support the arg sizes of find_vqs()")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220816053602.173815-6-mst@redhat.com>
|
|
This reverts commit cdb44806fca2d0ad29ca644cbf1505433902ee0c: the legacy
path is wrong and in fact can not support the proposed API since for a
legacy device we never communicate the vq size to the hypervisor.
Reported-by: Andres Freund <andres@anarazel.de>
Fixes: cdb44806fca2 ("virtio_pci: support the arg sizes of find_vqs()")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220816053602.173815-5-mst@redhat.com>
|
|
This reverts commit fbed86abba6e0472d98079790e58060e4332608a.
The API is now unused, let's not carry dead code around.
Fixes: fbed86abba6e ("virtio_mmio: support the arg sizes of find_vqs()")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220816053602.173815-4-mst@redhat.com>
|
|
This reverts commit 762faee5a2678559d3dc09d95f8f2c54cd0466a7.
This has been reported to trip up guests on GCP (Google Cloud).
The reason is that virtio_find_vqs_ctx_size is broken on legacy
devices. We can in theory fix virtio_find_vqs_ctx_size but
in fact the patch itself has several other issues:
- It treats unknown speed as < 10G
- It leaves userspace no way to find out the ring size set by hypervisor
- It tests speed when link is down
- It ignores the virtio spec advice:
Both \field{speed} and \field{duplex} can change, thus the driver
is expected to re-read these values after receiving a
configuration change notification.
- It is not clear the performance impact has been tested properly
Revert the patch for now.
Reported-by: Andres Freund <andres@anarazel.de>
Link: https://lore.kernel.org/r/20220814212610.GA3690074%40roeck-us.net
Link: https://lore.kernel.org/r/20220815070203.plwjx7b3cyugpdt7%40awork3.anarazel.de
Link: https://lore.kernel.org/r/3df6bb82-1951-455d-a768-e9e1513eb667%40www.fastmail.com
Link: https://lore.kernel.org/r/FCDC5DDE-3CDD-4B8A-916F-CA7D87B547CE%40anarazel.de
Fixes: 762faee5a267 ("virtio_net: set the default max ring size by find_vqs()")
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Andres Freund <andres@anarazel.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-Id: <20220816053602.173815-2-mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-08-12 (iavf)
This series contains updates to iavf driver only.
Przemyslaw frees memory for admin queues in initialization error paths,
prevents freeing of vf_res which is causing null pointer dereference,
and adjusts calls in error path of reset to avoid iavf_close() which
could cause deadlock.
Ivan Vecera avoids deadlock that can occur when driver if part of
failover.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: Fix deadlock in initialization
iavf: Fix reset error handling
iavf: Fix NULL pointer dereference in iavf_get_link_ksettings
iavf: Fix adminq error handling
====================
Link: https://lore.kernel.org/r/20220812172309.853230-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dma_map_single() calls fail in moxart_mac_setup_desc_ring() and
moxart_mac_start_xmit() which leads to an incessant output of this:
[ 16.043925] moxart-ethernet 92000000.mac eth0: DMA mapping error
[ 16.050957] moxart-ethernet 92000000.mac eth0: DMA mapping error
[ 16.058229] moxart-ethernet 92000000.mac eth0: DMA mapping error
Passing pdev to DMA is a common approach among net drivers.
Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220812171339.2271788-1-saproj@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit in Fixes also introduced a new error handling path which should
goto the existing error handling path.
Otherwise some resources leak.
Fixes: 0d31d91e6145 ("iio: light: cm3605: Make use of the helper function dev_err_probe()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/0e186de2c125b3e17476ebf9c54eae4a5d66f994.1659854238.git.christophe.jaillet@wanadoo.fr
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The device supports negative values as well.
Fixes: 3a89b289df5d ("iio: adc: add support for mcp3911")
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220722130726.7627-2-marcus.folkesson@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
