summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-08-27i40e: Fix for unused value issue found by static analysisCarolyn Wyborny
This patch fixes an issue where an error return value is set, but without an immediate exit, the value can be overwritten by the following code execution. The condition at this point is not fatal, so remove the error assignment and comment the intent for future code maintainers Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-08-27i40e: 25G FEC status improvementsMariusz Stachura
This patch improves the system log message. The log message will be expanded to include the FEC mode the FW requested before link was established. Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-08-27i40e/i40evf: support for VF VLAN tag stripping controlMariusz Stachura
This patch gives VF capability to control VLAN tag stripping via ethtool. As rx-vlan-offload was fixed before, now the VF is able to change it using "ethtool --offload <IF> rxvlan on/off" settings. Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-08-27i40e: force VMDQ device name truncationJacob Keller
In new versions of GCC since 7.x a new warning exists which warns when a string is truncated before all of the format can be completed. When we setup VMDQ netdev names we are copying a pre-existing interface name which could be up to 15 characters in length. Since we also add 4 bytes, v, the literal %, the d and a \0 null, we would overrun the available size unless snprintf truncated for us. The snprintf call will of course truncate on the end, so lets instead modify the code to force truncation of the copied netdev name by 4 characters, to create enough space for the 4 bytes we're adding. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-08-27i40evf: fix possible snprintf truncation of q_vector->nameJacob Keller
The q_vector names are based on the interface name with a driver prefix, the type of q_vector setup, and the queue number. We previously set the size of this variable to IFNAMSIZ + 9, which is incorrect, because we actually include a minimum of 14 characters extra beyond the interface name size. New versions of GCC since 7 include a new warning that detects this possible truncation and complains. We can fix this by increasing the size in case our interface name is too large to avoid truncation. We don't need to go beyond 14 because the compiler is smart enough to realize our values can never exceed size of 1. We do go up to 15 here because possible future changes may increase the number of queues beyond one digit. While we are here, also change some variables to be unsigned (since they are never negative) and stop using an extra unnecessary %s format specifier. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-08-27i40e: Use correct flag to enable egress traffic for unicast promiscAkeem G Abodunrin
Albeit, we usually set true promiscuous mode for both multicast and unicast at the same time - however, it is possible to set it individually, so using allmulti flag which is only for allmulticast might caused unwanted behavior in mirroring egress traffic promiscuous for unicast in VF. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-08-27i40e: prevent snprintf format specifier truncationJacob Keller
Increase the size of the prefix buffer so that it can hold enough characters for every possible input. Although 20 is enough for all expected inputs, it is possible for the values to be larger than expected, resulting in a possibly truncated string. Additionally, lets use sizeof(prefix) in order to ensure we use the correct size if we need to change the array length in the future. New versions of GCC starting at 7 now include warnings to prevent truncation unless you handle the return code. At most 27 bytes can be written here, so lets just increase the buffer size even if for all expected hw->bus.* values we only needed 20. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-08-27i40e: Store the requested FEC informationMariusz Stachura
Store information about FEC modes, that were requested. It will be used in printing link status information function and this way there is no need to call admin queue there. Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-08-27i40e: Update state variable for adminq subtaskSudheer Mogilappagari
During NVM update, state machine gets into unrecoverable state because i40e_clean_adminq_subtask can get scheduled after the admin queue command but before other state variables are updated. This causes incorrect input to i40e_nvmupd_check_wait_event and state transitions don't happen. This fix updates the state variables so that adminq_subtask will have accurate information whenever it gets scheduled. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-08-27media: max2175: Propagate the real error on devm_clk_get() failureFabio Estevam
When devm_clk_get() fails we should return the real error code instead of always returning -ENODEV. This allows defer probe to happen in the case the clock provider has not been enabled by the time max2175 driver gets probed. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: cx23885: Explicitly list Hauppauge model numbers of HVR-4400 and HVR-5500Matthias Schwarzott
Add two new model numbers to suppress this message in kernel log: cx23885: cx23885[0]: warning: unknown hauppauge model #121029 Add these model numbers: * Model 121019 - WinTV-HVR4400 * Model 121029 - WinTV-HVR5500 For WinTV-HVR4400 the documentation and my hardware differ: Documentation says it supports DVB-S/S2 and DVB-T, but my hardware also supports DVB-C. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: i2c: adv748x: Export I2C device table entries as module aliasesJavier Martinez Canillas
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the device was registered via OF, and the driver is only exporting the OF ID table entries as module aliases. So if the driver is built as module, autoload won't work since udev/kmod won't be able to match the registered OF device with its driver module. Before this patch: $ modinfo drivers/media/i2c/adv748x/adv748x.ko | grep alias alias: of:N*T*Cadi,adv7482C* alias: of:N*T*Cadi,adv7482 alias: of:N*T*Cadi,adv7481C* alias: of:N*T*Cadi,adv7481 After this patch: modinfo drivers/media/i2c/adv748x/adv748x.ko | grep alias alias: of:N*T*Cadi,adv7482C* alias: of:N*T*Cadi,adv7482 alias: of:N*T*Cadi,adv7481C* alias: of:N*T*Cadi,adv7481 alias: i2c:adv7482 alias: i2c:adv7481 Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: staging/imx: always select VIDEOBUF2_DMA_CONTIGArnd Bergmann
I ran into a rare build error during randconfig testing: drivers/staging/media/imx/imx-media-capture.o: In function `capture_stop_streaming': imx-media-capture.c:(.text+0x224): undefined reference to `vb2_buffer_done' drivers/staging/media/imx/imx-media-capture.o: In function `imx_media_capture_device_register': imx-media-capture.c:(.text+0xe60): undefined reference to `vb2_queue_init' imx-media-capture.c:(.text+0xfa0): undefined reference to `vb2_dma_contig_memops' While VIDEOBUF2_DMA_CONTIG was already selected by the camera driver, it wasn't necessarily there with just the base driver enabled. This moves the 'select' statement to the top-level option to make sure it's always available. Fixes: 64b5a49df486 ("[media] media: imx: Add Capture Device Interface") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dw2102: make dvb_usb_device_description structures constBhumika Goyal
dvb_usb_device_description structures are only used during a copy operation. Therefore, declare them as const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: mn88473: reset stream ID reg if no PLP givenOlli Salonen
If the PLP given is NO_STREAM_ID_FILTER (~0u) don't try to set that into the PLP register. Set PLP to 0 instead. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: mn88472: reset stream ID reg if no PLP givenOlli Salonen
If the PLP given is NO_STREAM_ID_FILTER (~0u) don't try to set that into the PLP register. Set PLP to 0 instead. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dvb_frontend: initialize variable s with FE_NONE instead of 0Colin Ian King
GIT_AUTHOR_NAME=Colin King GIT_AUTHOR_EMAIL=colin.king@canonical.com In a previous commit, we added FE_NONE as an unknown fe_status. Initialize variable s to FE_NONE instead of the more opaque value 0. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dvb_frontend: ensure that inital front end status initializedColin Ian King
The fe_status variable s is not initialized meaning it can have any random garbage status. This could be problematic if fe->ops.tune is false as s is not updated by the call to fe->ops.tune() and a subsequent check on the change status will using a garbage value. Fix this by adding FE_NONE to the enum fe_status and initializing s to this. Detected by CoverityScan, CID#112887 ("Uninitialized scalar variable") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27staging: rtl8723bs: remove null check before kfreeHimanshu Jha
Kfree on NULL pointer is a no-op and therefore checking is redundant. Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-27staging: r8822be: remove unnecessary call to memsetHimanshu Jha
call to memset to assign 0 value immediately after allocating memory with kzalloc is unnecesaary as kzalloc allocates the memory filled with 0 value. Build and tested it. Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-27staging: most: hdm_usb: Driver registration with module_driver macroAlex Briskin
Register with module_driver macro instead of module_init/module_exit. Signed-off-by: Alex Briskin <br.shurik@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-27regulator: rn5t618: add RC5T619 PMIC supportPierre-Hugues Husson
Extend the driver to support Ricoh RC5T619. Support the additional regulators and slightly different voltage ranges. Signed-off-by: Pierre-Hugues Husson <phh@phh.me> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-27blackfin: merge the two TWI header filesWolfram Sang
There seems to be no need for separate ones since all users include both files anyhow. Merge them because include/linux/i2c is to be deprecated. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-27i2c: davinci: Preserve return value of devm_clk_getFranklin S Cooper Jr
The i2c driver can run into driver dependency issues if its loaded before a clock driver it depends on. Therefore, EPROBE_DEFER may be returned by devm_clk_get and should be returned in probe to allow the kernel to reprobe the driver at a later time. This patch allows the error value returned by devm_clk_get to be passed through and not overwritten. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-27i2c: mediatek: Add i2c compatible for MediaTek MT7622Jun Gao
Add i2c compatible for MT7622. Compare to MT8173 i2c controller, MT7622 limits message numbers to 255, and does not support 4GB DMA mode. Signed-off-by: Jun Gao <jun.gao@mediatek.com> Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-27Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into ↵Wolfram Sang
i2c/for-4.14
2017-08-27media: usbvision: Improve a size determination in usbvision_alloc()Markus Elfring
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: usbvision: Adjust eight checks for null pointersMarkus Elfring
The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written !… Thus fix the affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: usbvision: Delete an error message for a failed memory allocation in ↵Markus Elfring
usbvision_probe() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: Staging: media: radio-bcm2048: make video_device constBhumika Goyal
Make this const as it is only used in a copy operation. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: radio: make video_device constBhumika Goyal
Make these const as they are only used in a copy operation. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dib8000: remove some bogus dead codeDan Carpenter
This function is broken. It sets the wrong front_end to NULL. But it's not used, so let's just delete it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dib9000: delete some unused broken codeDan Carpenter
The dib9000_remove_slave_frontend() function isn't used. I was reviewing it because my static checker claims it writes one element beyond the end of the array. That's a false positive. What it actually does is, if there are two or more front ends, then it prints a debug message to say that it removed the first one, stored in state->fe[1], and then it "removes" (scare quotes on purpose) the second one, stored in state->fe[2]. Deleting a front end from the middle is not really supported and breaks code like dib9000_release() which assumes the first NULL front end marks the end of the list. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: staging: omap4iss: make v4l2_file_operations constBhumika Goyal
Make this const as it is only stored in a const field of a video_device structure. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: usbtv: make v4l2_file_operations constBhumika Goyal
Make this const as it is only stored in a const field of a video_device structure. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: cx18: make v4l2_file_operations constBhumika Goyal
Make this const as it is only stored in a const field of a video_device structure. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: usb: make video_device constBhumika Goyal
Make these const as they are only used during a copy operation. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: pci: make video_device constBhumika Goyal
Make these const as they are either used during a copy operation or passed to a const argument of the function cx88_vdev_init. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: platform: make video_device constBhumika Goyal
Make these const as they are only used during a copy operation. Done using Coccinelle: @match disable optional_qualifier@ identifier s; @@ static struct video_device s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ identifier match.s; expression list[3] es; position ref.p; @@ cx88_vdev_init(es,&s@p,...) @good2@ position ref.p; identifier match.s,f,c; expression e; @@ ( e = s@p | e = s@p.f | c(...,s@p.f,...) | c(...,s@p,...) ) @bad depends on !good1 && !good2@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct video_device s; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: au0828: fix RC_CORE dependencyArnd Bergmann
When RC_CORE is a loadable module, and au0828 is built-in including the RC support, we get a link error: drivers/media/usb/au0828/au0828-input.o: In function `au0828_get_key_au8522': au0828-input.c:(.text+0x474): undefined reference to `ir_raw_event_store' drivers/media/usb/au0828/au0828-input.o: In function `au0828_rc_register': au0828-input.c:(.text+0x7c8): undefined reference to `rc_allocate_device' au0828-input.c:(.text+0x8f8): undefined reference to `rc_register_device' This adds an additional dependency, similar to the one for em28xx, to ensure the broken configuration is never used. Fixes: 2fcfd317f66c ("[media] au0828: add support for IR on HVR-950Q") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dib0090: fix duplicated code for different branchesGustavo A. R. Silva
Refactor code in order to avoid identical code for different branches. This issue was detected with the help of Coccinelle. Addresses-Coverity-ID: 1226795 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: mx2_emmaprp: Check for platform_get_irq() errorFabio Estevam
platform_get_irq() may fail, so we should better check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dvb-frontends/stv0367: remove QAM_AUTO from ddb_fe_opsDaniel Scheller
Since the cab_* codepath doesn't recognize QAM_AUTO, don't announce that it is supported when it really isn't. Fixes ie. w_scan from unconditionally using QAM_AUTO on DVB-C scans. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: imx: use setup_timerCihangir Akturk
Use setup_timer function instead of initializing timer with the function and data fields. Generated by: scripts/coccinelle/api/setup_timer.cocci. Signed-off-by: Cihangir Akturk <cakturk@gmail.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: mxl111sf: Fix potential null pointer dereferenceEugeniu Rosca
Reviewing the delta between cppcheck output of v4.9.39 and v4.9.40 stable updates, I stumbled on the new warning: mxl111sf.c:80: (warning) Possible null pointer dereference: rbuf Since copying state->rcvbuf into rbuf is not needed in the 'write-only' scenario (i.e. calling mxl111sf_ctrl_msg() from mxl111sf_i2c_send_data() or from mxl111sf_write_reg()), bypass memcpy() in this case. Fixes: d90b336f3f65 ("[media] mxl111sf: Fix driver to use heap allocate buffers for USB messages") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: au0828: fix unbalanced lock/unlock in au0828_usb_probeGustavo A. R. Silva
Call mutex_unlock and free dev on failure. Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dvb-usb: Add memory free on error path in dw2102_probe()Anton Vasilyev
If dw2102_probe() fails on dvb_usb_device_init(), then memleak occurs. The patch adds deallocation to the error path. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Reviewed-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: dvb-frontends/stv0910: change minsymrate to 100Ksyms/sDaniel Scheller
The demodulator supports symbol rates as low as 100Ksyms/s - the demod setup in start() already handles such low symbol rates and reviewers of stv0910 equipped cards even found and tested transponders with SRs in that range. So, announce this in the fe_ops. Cc: Ralph Metzler <rjkm@metzlerbros.de> Cc: Richard Scobie <r.scobie@clear.net.nz> Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: staging/cxd2099: Add module parameter for buffer modeDaniel Scheller
The buffer mode of the cxd2099 driver requires more work regarding error handling and thus can cause issues in some cases, so disable it by default and make that mode of operation controllable by users via a module parameter (ie. 'modprobe cxd2099 buffermode=1' enables current behaviour). The upstream codebase also has the buffer mode disabled by default, so we should match this (but users still can test things out using the modparm). Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Jasmin Jessich <jasmin@anw.at> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-27media: ddbridge: fix sparse warningsDaniel Scheller
Fix several drivers/media/pci/ddbridge/ddbridge-core.c: warning: symbol ... was not declared. Should it be static? drivers/media/pci/ddbridge/ddbridge-core.c: warning: Using plain integer as NULL pointer drivers/media/pci/ddbridge/ddbridge-io.h: warning: cast removes address space of expression drivers/media/pci/ddbridge/ddbridge-io.h: warning: incorrect type in argument 1 (different address spaces) at multiple places. Cc: Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit (git 2.34.1) at 2025-09-23 05:42:09 +0000