| Age | Commit message (Collapse) | Author |
|---|
|
The headroom reserved for received frames needs to be aligned to an
RX specific value. There is currently a discrepancy between the values
used in the Ethernet driver and the values passed to the FMan.
Coincidentally, the resulting aligned values are identical.
Fixes: 3c68b8fffb48 ("dpaa_eth: FMan erratum A050385 workaround")
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Impose a larger RX private data area only when the A050385 erratum is
present on the hardware. A smaller buffer size is sufficient in all
other scenarios. This enables a wider range of linear Jumbo frame
sizes in non-erratum scenarios, instead of turning to multi
buffer Scatter/Gather frames. The maximum linear frame size is
increased by 128 bytes for non-erratum arm64 platforms.
Cleanup the hardware annotations header defines in the process.
Fixes: 3c68b8fffb48 ("dpaa_eth: FMan erratum A050385 workaround")
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit f959dcd6ddfd ("dma-direct: Fix potential NULL pointer
dereference") made dma_mask as mandetory field to be setup even for
dma_virt_ops based dma devices. The commit in the fixes tag omitted
setting up the dma_mask on virtual devices triggering the below trace when
they were combined during the merge window.
Fix it by setting empty DMA MASK for software based RDMA devices.
WARNING: CPU: 1 PID: 8488 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x493/0x700
CPU: 1 PID: 8488 Comm: syz-executor144 Not tainted 5.9.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:dma_map_page_attrs+0x493/0x700 kernel/dma/mapping.c:149
Trace:
dma_map_single_attrs include/linux/dma-mapping.h:279 [inline]
ib_dma_map_single include/rdma/ib_verbs.h:3967 [inline]
ib_mad_post_receive_mads+0x23f/0xd60 drivers/infiniband/core/mad.c:2715
ib_mad_port_start drivers/infiniband/core/mad.c:2862 [inline]
ib_mad_port_open drivers/infiniband/core/mad.c:3016 [inline]
ib_mad_init_device+0x72b/0x1400 drivers/infiniband/core/mad.c:3092
add_client_context+0x405/0x5e0 drivers/infiniband/core/device.c:680
enable_device_and_get+0x1d5/0x3c0 drivers/infiniband/core/device.c:1301
ib_register_device drivers/infiniband/core/device.c:1376 [inline]
ib_register_device+0x7a7/0xa40 drivers/infiniband/core/device.c:1335
rxe_register_device+0x46d/0x570 drivers/infiniband/sw/rxe/rxe_verbs.c:1182
rxe_add+0x12fe/0x16d0 drivers/infiniband/sw/rxe/rxe.c:247
rxe_net_add+0x8c/0xe0 drivers/infiniband/sw/rxe/rxe_net.c:507
rxe_newlink drivers/infiniband/sw/rxe/rxe.c:269 [inline]
rxe_newlink+0xb7/0xe0 drivers/infiniband/sw/rxe/rxe.c:250
nldev_newlink+0x30e/0x540 drivers/infiniband/core/nldev.c:1555
rdma_nl_rcv_msg+0x367/0x690 drivers/infiniband/core/netlink.c:195
rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline]
rdma_nl_rcv+0x2f2/0x440 drivers/infiniband/core/netlink.c:259
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:671
____sys_sendmsg+0x6e8/0x810 net/socket.c:2353
___sys_sendmsg+0xf3/0x170 net/socket.c:2407
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2440
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x443699
Link: https://lore.kernel.org/r/20201030093803.278830-1-parav@nvidia.com
Reported-by: syzbot+34dc2fea3478e659af01@syzkaller.appspotmail.com
Fixes: e0477b34d9d1 ("RDMA: Explicitly pass in the dma_device to ib_register_device")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Tested-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Tested-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Zhu Yanjun <yanjunz@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When we read device memory, we lock a spinlock, write the address we
want to read from the device and then spin in a loop reading the data
in 32-bit quantities from another register.
As the description makes clear, this is rather inefficient, incurring
a PCIe bus transaction for every read. In a typical device today, we
want to read 786k SMEM if it crashes, leading to 192k register reads.
Occasionally, we've seen the whole loop take over 20 seconds and then
triggering the soft lockup detector.
Clearly, it is unreasonable to spin here for such extended periods of
time.
To fix this, break the loop down into an outer and an inner loop, and
break out of the inner loop if more than half a second elapsed. To
avoid too much overhead, check for that only every 128 reads, though
there's no particular reason for that number. Then, unlock and relock
to obtain NIC access again, reprogram the start address and continue.
This will keep (interrupt) latencies on the CPU down to a reasonable
time.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201022165103.45878a7e49aa.I3b9b9c5a10002915072312ce75b68ed5b3dc6e14@changeid
|
|
The clang build reports this warning
fw.c:1485:21: warning: address of array 'rtwdev->chip->fw_fifo_addr'
will always evaluate to 'true'
if (!rtwdev->chip->fw_fifo_addr) {
fw_fifo_addr is an array in rtw_chip_info so it is always
nonzero. A better check is if the first element of the array is
nonzero. In the cases where fw_fifo_addr is initialized by rtw88b
and rtw88c, the first array element is 0x780.
Fixes: 0fbc2f0f34cc ("rtw88: add dump firmware fifo support")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201011155438.15892-1-trix@redhat.com
|
|
Multiple CPUs may be mapped to the same hctx, allowing mulitple
submission contexts to attempt commit_rqs(). We need to verify we're
not writing the same doorbell value multiple times since that's a spec
violation.
Revert commit 54b2fcee1db041a83b52b51752dade6090cf952f.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1878596
Reported-by: "B.L. Jones" <brandon.gustav@googlemail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
There is no need to specify a "ULL" suffix for "all bits set": "~0" is
sufficient, and works regardless of type. In fact adding the suffix
makes the code more fragile.
Fixes: 48ab6d5d1f09 ("dma-mapping: fix 32-bit overflow with CONFIG_ARM_LPAE=n")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since the device is resumed from runtime-suspend in
__device_release_driver() anyway, it is better to do that before
looking for busy managed device links from it to consumers, because
if there are any, device_links_unbind_consumers() will be called
and it will cause the consumer devices' drivers to unbind, so the
consumer devices will be runtime-resumed. In turn, resuming each
consumer device will cause the supplier to be resumed and when the
runtime PM references from the given consumer to it are dropped, it
may be suspended. Then, the runtime-resume of the next consumer
will cause the supplier to resume again and so on.
Update the code accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fixes: 9ed9895370ae ("driver core: Functional dependencies tracking support")
Cc: All applicable <stable@vger.kernel.org> # All applicable
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After commit d12544fb2aa9 ("PM: runtime: Remove link state checks in
rpm_get/put_supplier()") nothing prevents the consumer device's
runtime PM from acquiring additional references to the supplier
device after pm_runtime_clean_up_links() has run (or even while it
is running), so calling this function from __device_release_driver()
may be pointless (or even harmful).
Moreover, it ignores stateless device links, so the runtime PM
handling of managed and stateless device links is inconsistent
because of it, so better get rid of it entirely.
Fixes: d12544fb2aa9 ("PM: runtime: Remove link state checks in rpm_get/put_supplier()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While removing a device link, drop the supplier device's runtime PM
usage counter as many times as needed to drop all of the runtime PM
references to it from the consumer in addition to dropping the
consumer's link count.
Fixes: baa8809f6097 ("PM / runtime: Optimize the use of device links")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The tbl_dma_addr argument is used to check the DMA boundary for the
allocations, and thus needs to be a dma_addr_t. swiotlb-xen instead
passed a physical address, which could lead to incorrect results for
strange offsets. Fix this by removing the parameter entirely and hard
code the DMA address for io_tlb_start instead.
Fixes: 91ffe4ad534a ("swiotlb-xen: introduce phys_to_dma/dma_to_phys translations")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
USB: fixes for v5.10-rc2
Nothing major as of yet, we're adding support for Intel Alder Lake-S
in dwc3, together with a few fixes that are quite important (memory
leak in raw-gadget, probe crashes in goku_udc, and so on).
Signed-off-by: Felipe Balbi <balbi@kernel.org>
* tag 'fixes-for-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
usb: raw-gadget: fix memory leak in gadget_setup
usb: dwc2: Avoid leaving the error_debugfs label unused
usb: dwc3: ep0: Fix delay status handling
usb: gadget: fsl: fix null pointer checking
usb: gadget: goku_udc: fix potential crashes in probe
usb: dwc3: pci: add support for the Intel Alder Lake-S
|
|
In order to make the vc4_kms_load code and error path a bit easier to
read and extend, add functions to create state objects, and use managed
actions to cleanup if needed.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029190104.2181730-6-maxime@cerno.tech
|
|
We can simplify a bit the bind code, its error path and unbind by using
the managed devm_drm_dev_alloc function.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029190104.2181730-5-maxime@cerno.tech
|
|
We have a helper to retrieve the vc4_dev structure from the drm_device one
when needed, so let's use it consistently.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029190104.2181730-4-maxime@cerno.tech
|
|
The job queue needs to be cleaned up using vc4_gem_destroy, but it's
not used consistently (vc4_drv's bind calls it in its error path, but
doesn't in unbind), and we can make that automatic through a managed
action. Let's remove the requirement to call vc4_gem_destroy.
Fixes: d5b1a78a772f ("drm/vc4: Add support for drawing 3D frames.")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029190104.2181730-3-maxime@cerno.tech
|
|
Using drmm_mode_config_init instead of drm_mode_config_init allows us to
cleanup a bit the error path.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029190104.2181730-2-maxime@cerno.tech
|
|
The BO cache needs to be cleaned up using vc4_bo_cache_destroy, but it's
not used consistently (vc4_drv's bind calls it in its error path, but
doesn't in unbind), and we can make that automatic through a managed
action. Let's remove the requirement to call vc4_bo_cache_destroy.
Fixes: c826a6e10644 ("drm/vc4: Add a BO cache.")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029190104.2181730-1-maxime@cerno.tech
|
|
Set 10ms as minimum i2c slave configuration timeout since st_lsm6dsx
relies on accel ODR for i2c master clock and at high sample rates
(e.g. 833Hz or 416Hz) the slave sensor occasionally may need more cycles
than i2c master timeout (2s/833Hz + 1 ~ 3ms) to apply the configuration
resulting in an uncomplete slave configuration and a constant reading
from the i2c slave connected to st_lsm6dsx i2c master.
Fixes: 8f9a5249e3d9 ("iio: imu: st_lsm6dsx: enable 833Hz sample frequency for tagged sensors")
Fixes: c91c1c844ebd ("iio: imu: st_lsm6dsx: add i2c embedded controller support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/a69c8236bf16a1569966815ed71710af2722ed7d.1604247274.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes/removals from Greg KH:
"Here's some small fixes for 5.10-rc2 and a big driver removal.
The fixes are for some reported issues in the interconnect and
coresight drivers, nothing major.
The "big" driver removal is the MIC drivers have been asked to be
removed as the hardware never shipped and Intel no longer wants to
maintain something that no one can use. This is welcomed by many as
the DMA usage of these drivers was "interesting" and the security
people were starting to question some issues that were starting to be
found in the codebase.
Note, one of the subsystems for this driver, the "VOP" code, will
probably come back in future kernel versions as it was looking to
potentially solve some PCIe virtualization issues that a number of
other vendors were wanting to solve. But as-is, this codebase didn't
work for anyone else so no actual functionality is being removed.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
coresight: cti: Initialize dynamic sysfs attributes
coresight: Fix uninitialised pointer bug in etm_setup_aux()
coresight: add module license
misc: mic: remove the MIC drivers
interconnect: qcom: use icc_sync state for sm8[12]50
interconnect: qcom: Ensure that the floor bandwidth value is enforced
interconnect: qcom: sc7180: Init BCMs before creating the nodes
interconnect: qcom: sdm845: Init BCMs before creating the nodes
interconnect: Aggregate before setting initial bandwidth
interconnect: qcom: sdm845: Enable keepalive for the MM1 BCM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for issues that have been
reported in 5.10-rc1:
- octeon driver fixes
- wfx driver fixes
- memory leak fix in vchiq driver
- fieldbus driver bugfix
- comedi driver bugfix
All of these have been in linux-next with no reported issues"
* tag 'staging-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: fieldbus: anybuss: jump to correct label in an error path
staging: wfx: fix test on return value of gpiod_get_value()
staging: wfx: fix use of uninitialized pointer
staging: mmal-vchiq: Fix memory leak for vchiq_instance
staging: comedi: cb_pcidas: Allow 2-channel commands for AO subdevice
staging: octeon: Drop on uncorrectable alignment or FCS error
staging: octeon: repair "fixed-link" support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small TTY and Serial driver fixes for reported issues
for 5.10-rc2. They include:
- vt ioctl bugfix for reported problems
- fsl_lpuart serial driver fix
- 21285 serial driver bugfix
All have been in linux-next with no reported issues"
* tag 'tty-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vt_ioctl: fix GIO_UNIMAP regression
vt: keyboard, extend func_buf_lock to readers
vt: keyboard, simplify vt_kdgkbsent
tty: serial: fsl_lpuart: LS1021A has a FIFO size of 16 words, like LS1028A
tty: serial: 21285: fix lockup on open
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are a number of small bugfixes for reported issues in some USB
drivers. They include:
- typec bugfixes
- xhci bugfixes and lockdep warning fixes
- cdc-acm driver regression fix
- kernel doc fixes
- cdns3 driver bugfixes for a bunch of reported issues
- other tiny USB driver fixes
All have been in linux-next with no reported issues"
* tag 'usb-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdns3: gadget: own the lock wrongly at the suspend routine
usb: cdns3: Fix on-chip memory overflow issue
usb: cdns3: gadget: suspicious implicit sign extension
xhci: Don't create stream debugfs files with spinlock held.
usb: xhci: Workaround for S3 issue on AMD SNPS 3.0 xHC
xhci: Fix sizeof() mismatch
usb: typec: stusb160x: fix signedness comparison issue with enum variables
usb: typec: add missing MODULE_DEVICE_TABLE() to stusb160x
USB: apple-mfi-fastcharge: don't probe unhandled devices
usbcore: Check both id_table and match() when both available
usb: host: ehci-tegra: Fix error handling in tegra_ehci_probe()
usb: typec: stusb160x: fix an IS_ERR() vs NULL check in probe
usb: typec: tcpm: reset hard_reset_count for any disconnect
usb: cdc-acm: fix cooldown mechanism
usb: host: fsl-mph-dr-of: check return of dma_set_mask()
usb: fix kernel-doc markups
usb: typec: stusb160x: fix some signedness bugs
usb: cdns3: Variable 'length' set but not used
|
|
The values given were the offset of the register after the last
register instead of the actual last register in each range. Fix
by using the correct last register of each range.
Fixes: f213729f6796 ("counter: new TI eQEP driver")
Signed-off-by: David Lechner <david@lechnology.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/20201025165122.607866-1-david@lechnology.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Since overrun interrupt support has been added, there's a regression when
two ADCs are used at the same time, with:
- an ADC configured to use IRQs. EOCIE bit is set. The handler is normally
called in this case.
- an ADC configured to use DMA. EOCIE bit isn't set. EOC triggers the DMA
request. It's then automatically cleared by DMA read. But the handler
gets called due to status bit is temporarily set (IRQ triggered by the
other ADC).
This is a regression as similar issue had been fixed earlier by
commit dcb10920179a ("iio: adc: stm32-adc:
fix a race when using several adcs with dma and irq").
Issue is that stm32_adc_eoc_enabled() returns non-zero value (always)
since OVR bit has been added and enabled for both DMA and IRQ case.
Remove OVR mask in IER register, and rely only on CSR status for overrun.
To avoid subsequent calls to interrupt routine on overrun, CSR OVR bit has
to be cleared. CSR OVR bit cannot be cleared directly by software.
To do this ADC must be stopped first, and OVR bit in ADC ISR has
to be cleared.
Also add a check in ADC IRQ handler to report spurious IRQs.
Fixes: cc06e67d8fa5 ("iio: adc: stm32-adc: Add check on overrun interrupt")
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201021085313.5335-1-olivier.moysan@st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
dev_comp field is used in a couple of places but it is never set. This
results in kernel oops when dereferencing a NULL pointer. Set the
`dev_comp` field correctly in the probe function.
Fixes: 6d97024dce23 ("iio: adc: mediatek: mt6577-auxadc, add mt6765 support")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201018194644.3366846-1-fparent@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Minimal and maximal frequencies supported by a sensor is queried.
On some older machines, these frequencies are not returned properly and
the EC returns 0 instead.
When returned maximal frequency is 0, ignore the information and use
default frequencies instead.
Fixes: ae7b02ad2f32 ("iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20200630153730.3302889-1-gwendal@chromium.org
CC: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The DMA (BCDMA/PKTDMA and their rings/flows) events are under the INTA's
supervision as unmapped events in AM64.
In order to keep the current SW stack working, the INTA driver must replace
the dev_id with it's own when a request comes for BCDMA or PKTDMA
resources.
Implement parsing of the optional "ti,unmapped-event-sources" phandle array
to get the sci-dev-ids of the devices where the unmapped events originate.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201020073243.19255-3-peter.ujfalusi@ti.com
|
|
Get rid of the separate flag to indicate if the IRLM bit is present in
the INTC/Interrupt Control Register 0, by considering -1 an invalid
irlm_bit value.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201028153955.1736767-1-geert+renesas@glider.be
|
|
The plic driver crashes in plic_irq_unmask() when the interrupt is within a
hierarchy, as it picks the top-level chip_data instead of its local one.
Using irq_data_get_irq_chip_data() instead of irq_get_chip_data() solves
the issue for good.
Fixes: f1ad1133b18f ("irqchip/sifive-plic: Add support for multiple PLICs")
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
[maz: rewrote commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Link: https://lore.kernel.org/r/20201029023738.127472-1-greentime.hu@sifive.com
|
|
In my test setup, I had a SAMA5D27 device configured with ip forwarding, and
second device with usb ethernet (r8152) sending ICMP packets. If the packet
was larger than about 220 bytes, the SAMA5 device would "oops" with the
following trace:
kernel BUG at net/core/skbuff.c:1863!
Internal error: Oops - BUG: 0 [#1] ARM
Modules linked in: xt_MASQUERADE ppp_async ppp_generic slhc iptable_nat xt_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 can_raw can bridge stp llc ipt_REJECT nf_reject_ipv4 sd_mod cdc_ether usbnet usb_storage r8152 scsi_mod mii o
ption usb_wwan usbserial micrel macb at91_sama5d2_adc phylink gpio_sama5d2_piobu m_can_platform m_can industrialio_triggered_buffer kfifo_buf of_mdio can_dev fixed_phy sdhci_of_at91 sdhci_pltfm libphy sdhci mmc_core ohci_at91 ehci_atmel o
hci_hcd iio_rescale industrialio sch_fq_codel spidev prox2_hal(O)
CPU: 0 PID: 0 Comm: swapper Tainted: G O 5.9.1-prox2+ #1
Hardware name: Atmel SAMA5
PC is at skb_put+0x3c/0x50
LR is at macb_start_xmit+0x134/0xad0 [macb]
pc : [<c05258cc>] lr : [<bf0ea5b8>] psr: 20070113
sp : c0d01a60 ip : c07232c0 fp : c4250000
r10: c0d03cc8 r9 : 00000000 r8 : c0d038c0
r7 : 00000000 r6 : 00000008 r5 : c59b66c0 r4 : 0000002a
r3 : 8f659eff r2 : c59e9eea r1 : 00000001 r0 : c59b66c0
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c53c7d Table: 2640c059 DAC: 00000051
Process swapper (pid: 0, stack limit = 0x75002d81)
<snipped stack>
[<c05258cc>] (skb_put) from [<bf0ea5b8>] (macb_start_xmit+0x134/0xad0 [macb])
[<bf0ea5b8>] (macb_start_xmit [macb]) from [<c053e504>] (dev_hard_start_xmit+0x90/0x11c)
[<c053e504>] (dev_hard_start_xmit) from [<c0571180>] (sch_direct_xmit+0x124/0x260)
[<c0571180>] (sch_direct_xmit) from [<c053eae4>] (__dev_queue_xmit+0x4b0/0x6d0)
[<c053eae4>] (__dev_queue_xmit) from [<c05a5650>] (ip_finish_output2+0x350/0x580)
[<c05a5650>] (ip_finish_output2) from [<c05a7e24>] (ip_output+0xb4/0x13c)
[<c05a7e24>] (ip_output) from [<c05a39d0>] (ip_forward+0x474/0x500)
[<c05a39d0>] (ip_forward) from [<c05a13d8>] (ip_sublist_rcv_finish+0x3c/0x50)
[<c05a13d8>] (ip_sublist_rcv_finish) from [<c05a19b8>] (ip_sublist_rcv+0x11c/0x188)
[<c05a19b8>] (ip_sublist_rcv) from [<c05a2494>] (ip_list_rcv+0xf8/0x124)
[<c05a2494>] (ip_list_rcv) from [<c05403c4>] (__netif_receive_skb_list_core+0x1a0/0x20c)
[<c05403c4>] (__netif_receive_skb_list_core) from [<c05405c4>] (netif_receive_skb_list_internal+0x194/0x230)
[<c05405c4>] (netif_receive_skb_list_internal) from [<c0540684>] (gro_normal_list.part.0+0x14/0x28)
[<c0540684>] (gro_normal_list.part.0) from [<c0541280>] (napi_complete_done+0x16c/0x210)
[<c0541280>] (napi_complete_done) from [<bf14c1c0>] (r8152_poll+0x684/0x708 [r8152])
[<bf14c1c0>] (r8152_poll [r8152]) from [<c0541424>] (net_rx_action+0x100/0x328)
[<c0541424>] (net_rx_action) from [<c01012ec>] (__do_softirq+0xec/0x274)
[<c01012ec>] (__do_softirq) from [<c012d6d4>] (irq_exit+0xcc/0xd0)
[<c012d6d4>] (irq_exit) from [<c0160960>] (__handle_domain_irq+0x58/0xa4)
[<c0160960>] (__handle_domain_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x90)
Exception stack(0xc0d01ef0 to 0xc0d01f38)
1ee0: 00000000 0000003d 0c31f383 c0d0fa00
1f00: c0d2eb80 00000000 c0d2e630 4dad8c49 4da967b0 0000003d 0000003d 00000000
1f20: fffffff5 c0d01f40 c04e0f88 c04e0f8c 30070013 ffffffff
[<c0100b0c>] (__irq_svc) from [<c04e0f8c>] (cpuidle_enter_state+0x7c/0x378)
[<c04e0f8c>] (cpuidle_enter_state) from [<c04e12c4>] (cpuidle_enter+0x28/0x38)
[<c04e12c4>] (cpuidle_enter) from [<c014f710>] (do_idle+0x194/0x214)
[<c014f710>] (do_idle) from [<c014fa50>] (cpu_startup_entry+0xc/0x14)
[<c014fa50>] (cpu_startup_entry) from [<c0a00dc8>] (start_kernel+0x46c/0x4a0)
Code: e580c054 8a000002 e1a00002 e8bd8070 (e7f001f2)
---[ end trace 146c8a334115490c ]---
The solution was to force nonlinear buffers to be cloned. This was previously
reported by Klaus Doth (https://www.spinics.net/lists/netdev/msg556937.html)
but never formally submitted as a patch.
This is the third revision, hopefully the formatting is correct this time!
Suggested-by: Klaus Doth <krnl@doth.eu>
Fixes: 653e92a9175e ("net: macb: add support for padding and fcs computation")
Signed-off-by: Mark Deneen <mdeneen@saucontech.com>
Link: https://lore.kernel.org/r/20201030155814.622831-1-mdeneen@saucontech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull vhost fixes from Michael Tsirkin:
"Fixes all over the place.
A new UAPI is borderline: can also be considered a new feature but
also seems to be the only way we could come up with to fix addressing
for userspace - and it seems important to switch to it now before
userspace making assumptions about addressing ability of devices is
set in stone"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpasim: allow to assign a MAC address
vdpasim: fix MAC address configuration
vdpa: handle irq bypass register failure case
vdpa_sim: Fix DMA mask
Revert "vhost-vdpa: fix page pinning leakage in error path"
vdpa/mlx5: Fix error return in map_direct_mr()
vhost_vdpa: Return -EFAULT if copy_from_user() fails
vdpa_sim: implement get_iova_range()
vhost: vdpa: report iova range
vdpa: introduce config op to get valid iova range
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull more flexible-array member conversions from Gustavo A. R. Silva:
"Replace zero-length arrays with flexible-array members"
* tag 'flexible-array-conversions-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
printk: ringbuffer: Replace zero-length array with flexible-array member
net/smc: Replace zero-length array with flexible-array member
net/mlx5: Replace zero-length array with flexible-array member
mei: hw: Replace zero-length array with flexible-array member
gve: Replace zero-length array with flexible-array member
Bluetooth: btintel: Replace zero-length array with flexible-array member
scsi: target: tcmu: Replace zero-length array with flexible-array member
ima: Replace zero-length array with flexible-array member
enetc: Replace zero-length array with flexible-array member
fs: Replace zero-length array with flexible-array member
Bluetooth: Replace zero-length array with flexible-array member
params: Replace zero-length array with flexible-array member
tracepoint: Replace zero-length array with flexible-array member
platform/chrome: cros_ec_proto: Replace zero-length array with flexible-array member
platform/chrome: cros_ec_commands: Replace zero-length array with flexible-array member
mailbox: zynqmp-ipi-message: Replace zero-length array with flexible-array member
dmaengine: ti-cppi5: Replace zero-length array with flexible-array member
|
|
Pull dma-mapping fix from Christoph Hellwig:
"Fix an integer overflow on 32-bit platforms in the new DMA range code
(Geert Uytterhoeven)"
* tag 'dma-mapping-5.10-2' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: fix 32-bit overflow with CONFIG_ARM_LPAE=n
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four driver fixes and one core fix.
The core fix closes a race window where we could kick off a second
asynchronous scan because the test and set of the variable preventing
it isn't atomic"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hisi_sas: Stop using queue #0 always for v2 hw
scsi: ibmvscsi: Fix potential race after loss of transport
scsi: mptfusion: Fix null pointer dereferences in mptscsih_remove()
scsi: qla2xxx: Return EBUSY on fcport deletion
scsi: core: Don't start concurrent async scan on same host
|
|
Pull block fixes from Jens Axboe:
- null_blk zone fixes (Damien, Kanchan)
- NVMe pull request from Christoph:
- improve zone revalidation (Keith Busch)
- gracefully handle zero length messages in nvme-rdma (zhenwei pi)
- nvme-fc error handling fixes (James Smart)
- nvmet tracing NULL pointer dereference fix (Chaitanya Kulkarni)"
- xsysace platform fixes (Andy)
- scatterlist type cleanup (David)
- blk-cgroup memory fixes (Gabriel)
- nbd block size update fix (Ming)
- Flush completion state fix (Ming)
- bio_add_hw_page() iteration fix (Naohiro)
* tag 'block-5.10-2020-10-30' of git://git.kernel.dk/linux-block:
blk-mq: mark flush request as IDLE in flush_end_io()
lib/scatterlist: use consistent sg_copy_buffer() return type
xsysace: use platform_get_resource() and platform_get_irq_optional()
null_blk: Fix locking in zoned mode
null_blk: Fix zone reset all tracing
nbd: don't update block size after device is started
block: advance iov_iter on bio_add_hw_page failure
null_blk: synchronization fix for zoned device
nvmet: fix a NULL pointer dereference when tracing the flush command
nvme-fc: remove nvme_fc_terminate_io()
nvme-fc: eliminate terminate_io use by nvme_fc_error_recovery
nvme-fc: remove err_work work item
nvme-fc: track error_recovery while connecting
nvme-rdma: handle unexpected nvme completion data length
nvme: ignore zone validate errors on subsequent scans
blk-cgroup: Pre-allocate tree node on blkg_conf_prep
blk-cgroup: Fix memleak on error path
|
|
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The
older style of one-element or zero-length arrays should no longer be
used[2].
Refactor the code according to the use of a flexible-array member in
struct gve_stats_report, instead of a zero-length array, and use the
struct_size() helper to calculate the size for the resource allocation.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
Pull libata fix from Jens Axboe:
"Single fix for an old regression with sata_nv"
* tag 'libata-5.10-2020-10-30' of git://git.kernel.dk/linux-block:
ata: sata_nv: Fix retrieving of active qcs
|
|
Some devices support ACS functionality even though they don't have a
spec-compliant ACS Capability; pci_enable_acs() has a quirk mechanism to
handle them.
We want to enable ACS whenever possible, but 52fbf5bdeeef ("PCI: Cache ACS
capability offset in device") inadvertently broke this by calling
pci_enable_acs() only if we find an ACS Capability.
This resulted in ACS not being enabled for these non-compliant devices,
which means devices can't be separated into different IOMMU groups, which
in turn means we may not be able to pass those devices through to VMs, as
reported by Boris V:
https://lore.kernel.org/r/74aeea93-8a46-5f5a-343c-790d4c655da3@bstnet.org
Fixes: 52fbf5bdeeef ("PCI: Cache ACS capability offset in device")
Link: https://lore.kernel.org/r/20201028231545.4116866-1-rajatja@google.com
Reported-by: Boris V <borisvk@bstnet.org>
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is a fairly large set of bug fixes on top of -rc1, as most of
them were ready but didn't quite make it into the last-minute pull
requests for the merge window.
Allwinner:
- fix for incorrect CPU overtemperature limit
Amlogic:
- multiple smaller DT bugfixes, and missing device nodes
Marvell EBU:
- add missing aliases for ethernet switch ports on espressobin board
Marvell MMP:
- DTC warning fix
- bugfix for camera interface power-down
NXP i.MX:
- re-enable the GPIO driver on all defconfigs
ST STM32MP1:
- fix random crashes from incorrect voltage settings
Synaptics Berlin:
- enable the correct hardware timer driver
Texas Instruments K2G:
- fix a boot regression in the power domain code
TEE drivers:
- fix regression in TEE "login" method
SCMI drivers:
- multiple code fixes for corner cases in newly added code
MAINTAINERS file:
- move Kukjin Kim and Sangbeom Kim to credits (used to work on
Samsung Exynos)
- Masahiro Yamada is stepping down as Uniphier maintainer
I did not include a series of patches that work around a regression
caused by a bugfix in an ethernet phy driver that resulted in an
inadvertent DT binding change. This is still under discussion"
* tag 'arm-soc-fixes-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
soc: ti: ti_sci_pm_domains: check for proper args count in xlate
ARM: dts: stm32: Describe Vin power supply on stm32mp157c-edx board
ARM: dts: stm32: Describe Vin power supply on stm32mp15xx-dkx board
ARM: multi_v5_defconfig: Select CONFIG_GPIO_MXC
ARM: imx_v4_v5_defconfig: Select CONFIG_GPIO_MXC
ARM: dts: mmp2-olpc-xo-1-75: Use plural form of "-gpios"
ARM: dts: mmp3: Add power domain for the camera
arm64: berlin: Select DW_APB_TIMER_OF
dt-bindings: sram: sunxi-sram: add V3s compatible string
MAINTAINERS: Move Sangbeom Kim to credits
MAINTAINERS: Move Kukjin Kim to credits
MAINTAINERS: step down as maintainer of UniPhier SoCs and Denali driver
ARM: multi_v7_defconfig: Build in CONFIG_GPIO_MXC by default
ARM: imx_v6_v7_defconfig: Build in CONFIG_GPIO_MXC by default
arm64: defconfig: Build in CONFIG_GPIO_MXC by default
arm64: dts: meson: odroid-n2 plus: fix vddcpu_a pwm
ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
arm64: dts: amlogic: add missing ethernet reset ID
firmware: arm_scmi: Fix duplicate workqueue name
firmware: arm_scmi: Fix locking in notifications
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull PNP fix from Rafael Wysocki:
"Make function names in kerneldoc comments match the actual names of
the functions that they correspond to (Mauro Carvalho Chehab)"
* tag 'pnp-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PNP: fix kernel-doc markups
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework fixes from Rafael Wysocki:
"Fix the secondary firmware node handling while manipulating the
primary firmware node for a given device (Andy Shevchenko)"
* tag 'devprop-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: Don't clear secondary pointer for shared primary firmware node
device property: Keep secondary firmware node secondary by type
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix three assorted minor issues.
Specifics:
- Eliminate compiler warning emitted when building the ACPI dock
driver (Arnd Bergmann).
- Drop lid_init_state quirk for Acer SW5-012 that is not needed any
more after recent changes (Hans de Goede).
- Fix "missing minus" typo in the NFIT parsing code (Zhang Qilong)"
* tag 'acpi-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: button: Drop no longer necessary Acer SW5-012 lid_init_state quirk
ACPI: NFIT: Fix comparison to '-ENXIO'
ACPI: dock: fix enum-conversion warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a few issues related to running intel_pstate in the passive
mode with HWP enabled, correct the handling of the max_cstate module
parameter in intel_idle and make a few janitorial changes.
Specifics:
- Modify Kconfig to prevent configuring either the "conservative" or
the "ondemand" governor as the default cpufreq governor if
intel_pstate is selected, in which case "schedutil" is the default
choice for the default governor setting (Rafael Wysocki).
- Modify the cpufreq core, intel_pstate and the schedutil governor to
avoid missing updates of the HWP max limit when intel_pstate
operates in the passive mode with HWP enabled (Rafael Wysocki).
- Fix max_cstate module parameter handling in intel_idle for
processor models with C-state tables coming from ACPI (Chen Yu).
- Clean up assorted pieces of power management code (Jackie Zamow,
Tom Rix, Zhang Qilong)"
* tag 'pm-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: schedutil: Always call driver if CPUFREQ_NEED_UPDATE_LIMITS is set
cpufreq: Introduce cpufreq_driver_test_flags()
cpufreq: speedstep: remove unneeded semicolon
PM: sleep: fix typo in kernel/power/process.c
intel_idle: Fix max_cstate for processor models without C-state tables
cpufreq: intel_pstate: Avoid missing HWP max updates in passive mode
cpufreq: Introduce CPUFREQ_NEED_UPDATE_LIMITS driver flag
cpufreq: Avoid configuring old governors as default with intel_pstate
cpufreq: e_powersaver: remove unreachable break
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- sdhci: Fix performance regression with auto CMD auto select
- sdhci-of-esdhc: Fix initialization for eMMC HS400 mode
- sdhci-of-esdhc: Fix timeout bug for tuning commands
* tag 'mmc-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-of-esdhc: make sure delay chain locked for HS400
mmc: sdhci-of-esdhc: set timeout to max before tuning
mmc: sdhci: Use Auto CMD Auto Select only when v4_mode is true
|
|
Pull drm fixes from Dave Airlie:
"A busier rc2 than normal, have larger sets of fixes for amdgpu +
nouveau, along with some i915, docs, core, panel, sun4i, v3d, vc4
fixes.
Nothing spooky though or pumpkin related.
docs:
- kernel doc fixes
core:
- fix shmem helpers dma-buf mmap bug
amdgpu:
- Add new navi1x PCI ID
- GPUVM reserved area fixes
- Misc display fixes
- Fix bad interactions between display code and CONFIG_KGDB
- Fixes for SMU manual fan control and i2c
nouveau:
- endian regression fix for old gpus
- buffer object refcount fix
- uapi start/end alignment fix
- display notifier fix
- display clock checking fixes
i915:
- Fix max memory region size calculation
- Restore ILK-M RPS support, restoring performance
- Reject 90/270 degreerotated initial fbs
panel:
- mantix reset fixes
sun4i:
- scalar fix
vc4:
- hdmi audio fixes
v3d:
- fix double free"
* tag 'drm-fixes-2020-10-30-1' of git://anongit.freedesktop.org/drm/drm: (42 commits)
drm/nouveau/kms/nv50-: Fix clock checking algorithm in nv50_dp_mode_valid()
drm/nouveau/kms/nv50-: Get rid of bogus nouveau_conn_mode_valid()
drm/nouveau/device: fix changing endianess code to work on older GPUs
drm/nouveau/gem: fix "refcount_t: underflow; use-after-free"
drm/nouveau/kms/nv50-: Program notifier offset before requesting disp caps
drm/nouveau/nouveau: fix the start/end range for migration
drm/i915: Reject 90/270 degree rotated initial fbs
drm/i915: Restore ILK-M RPS support
drm/i915/region: fix max size calculation
drm/vc4: Rework the structure conversion functions
drm/vc4: hdmi: Add a name to the codec DAI component
drm/shme-helpers: Fix dma_buf_mmap forwarding bug
drm/vc4: hdmi: Avoid sleeping in atomic context
drm/amdgpu/pm: fix the fan speed in fan1_input in manual mode for navi1x
drm/amd/pm: fix the wrong fan speed in fan1_input
drm/amdgpu/swsmu: drop smu i2c bus on navi1x
drm/vc4: drv: Add error handding for bind
drm: drm_print.h: fix kernel-doc markups
drm: kernel-doc: drm_dp_helper.h: fix a typo
drm: kernel-doc: add description for a new function parameter
...
|
|
Since commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework user
input parsing bits"), ECC are broken in FMC2 driver in case of
nand-ecc-step-size and nand-ecc-strength are not set in the device tree.
To avoid this issue, the default settings are now set in
stm32_fmc2_nfc_attach_chip function.
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Fixes: d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1604064819-26861-1-git-send-email-christophe.kerello@st.com
|
