summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-10-22iwlwifi: mvm: set BT-coex high priority for 802.1X/4-way-HSJohannes Berg
Set BT coex high priority during the 802.1X handshake to avoid issues where BT is active enough to kill all the big negotiation frames that we may need to send (e.g. with a large certificate), leading to the connection not being established correctly. Give WiFi priority over BT during this short but critical phase. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017165728.a1825bbba397.I10315577fb41dfcec15c92e8f6785d9655f74c6a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: dbg: treat dbgc allocation failure when tlv is missingRotem Saado
in case allocation tlv is missing for specific dbgc id, treat it as allocation failure. with this behavior we removing later the unsupported regions relating to the failed dbgc allocation. this saves operational driver memory and run time at collecting debug data. Signed-off-by: Rotem Saado <rotem.saado@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017165728.4cd241abf1de.I8f6cf00a7266675dfebdc01a73c1ac6e001855b9@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: add new killer devices to the driverYaara Baruch
Add 1550, 1675 and 1690 killer devices to the driver. Signed-off-by: Yaara Baruch <yaara.baruch@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017165728.9a3d01b8c4e9.I9720afa0a6ea72f94ed4a3f3cf88294174ab905b@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: set inactivity timeouts also for PS-pollSara Sharon
Code tried to avoid setting ACs for PS-poll by an early return. However as a result the timeouts weren't set as well. Inactivity timeout of zero means we will always try to go back to sleep immediately after moving to AM, which doesn't make much sense, and isn't supported by FW. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017165728.dda7f6ba0b22.Ia107bfe496b84e8a2edb33d9f39a5d2b56ed63f7@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: pcie: try to grab NIC access earlyJohannes Berg
Sometimes some NICs may fail to initialize, but if we have such a scenario we may only see an alive timeout (i.e. the firmware doesn't send us the alive message), and that will only cause us to fail the interface up. Try to once grab NIC access during device probe to ensure we can properly talk to the hardware at all, and to do all the potential workarounds in that function. Since we now finish NIC init here, we can remove it from the later potential read of the RF ID. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017165728.604dfc8f43bd.I07b58a5c9238f75413a91198452ba1268ee79425@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: reduce WARN_ON() in TX status pathJohannes Berg
Evidently, it's possible to hit this issue, so reduce the noise from it by just having it print a (rate-limited) message instead. We don't really know yet why we hit it, but there's no value in having a WARN_ON() here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.8d503387b523.Id2c82d023df5128e553b28c935d30df4d9411917@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: allow rate-limited error messagesJohannes Berg
Sometimes we might want to have an error message for something related to TX/RX, but if that somehow happens frequently it'll overwhelm the logs. Add IWL_ERR_LIMIT() to alleviate that by rate-limiting those messages. To do this, rework __iwl_err() a bit to have a mode argument instead of passing yet another (bool) argument to it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.2cb1e6b75672.Iec5b1c1bcc6ebc87c586921a6c5c2a937f49e83c@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: remove session protection after auth/assocJohannes Berg
When auth/assoc completes, we should remove session protection, except when association is successful, where we need it until a beacon is received from the AP. In particular, in the case of assoc comeback, currently the session protection event just times out, leading to confusing messages: wlan0: 42:00:00:00:00:00 rejected association temporarily; comeback duration 1000 TU (1024 ms) iwlwifi 0000:00:00.0: Not associated and the session protection is over already... wlan0: Connection to AP 42:00:00:00:00:00 lost wlan0: associate with 42:00:00:00:00:00 (try 2/3) mac80211 never does anything on the "Connection ... lost" as it's not even connected. Removing the session protection when it's no longer needed removes those confusing messages and lets the device do other things in the allocated time. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.95e4bebb069b.I635280e5d26c70414ac6eb5d62b46fe4bd942818@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: remove redundant iwl_finish_nic_init() argumentJohannes Berg
We don't need this argument, since in all cases where the function is called, trans->trans_cfg is already set (it's in fact set during allocation). Remove it to avoid any confusion about it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.cb04580b8521.I7129d4ba3dc689af839761d5807a10f99718893e@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Add RTS and CTS flags to iwl_tx_cmd_flags.Miri Korenblit
As part of the new rate_n_flags, the RTS and CTS flags are being removed from it. Instead, we have these flags in the flags field in the TX command. Add to new flags to the iwl_tx_cmd_flags enum. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.b5aaabb04432.I999f86ed6a9d9b99e63a33f724963f83f85fbb44@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: remove csi from iwl_mvm_pass_packet_to_mac80211()Luca Coelho
Remove the unused csi parameter from iwl_mvm_pass_packet_to_mac80211(). It is not used anymore, but was accidentally left in. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20211017132604.480251-2-luca@coelho.fi Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Support new rate_n_flags for REPLY_RX_MPDU_CMD and ↵Luca Coelho
RX_NO_DATA_NOTIF As part of the new rate_n_flags this two APIs may use the new rate. Add support for the new rate. These two APIs were updated in one patch because both of them are using the same functions which were changed. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.7eb6240b8079.I1e804e70a8ebd23840a9431fc5d2a56ad8d5d1a2@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Support new TX_RSP and COMPRESSED_BA_RES versionsMiri Korenblit
As part of the new rate_n_flags, a new version of this structures was added in the FW. Add support for this new version and for the new rate_n_flags in this API. Both these APIs were updated in one patch since they are using the same functions. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.a28e7a92f558.I19f72735c674f815c6e7c11cecfad6230b4510ef@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Support new version of BEACON_TEMPLATE_CMD.Miri Korenblit
As part of the new rate_n_flags, a new version of BEACON_TEMPLATE_CMD was added in FW in order to support the new rate_n_flags. Add support for the new version. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.b42e67f14293.Ic3f1ed8cb3a31cfaa51174497dd993936b00d398@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Add support for new rate_n_flags in tx_cmd.Miri Korenblit
As part of the new rate_n_flags, tx_cmd API has changed. Add support for these changes. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.26efa51624b1.Ic96ae4d81b3ff07fb514df2b5f6a8e470e4d3778@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: BZ Family SW reset supportRoee Goldfiner
Previously added BZ reset wasn't taking into account the call to iwl_trans_pcie_sw_reset which used a pre-BZ logic to reset the device - enabling iwl_trans_pcie_sw_reset to support BZ family made this reset redundant. MAC_ACCESS clear shouldn't be called here but only when calling _iwl_trans_pcie_stop_device which now support also BZ family. Signed-off-by: Roee Goldfiner <roee.h.goldfiner@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.648931fe07e2.Ibf30f9b8e70536da93c4a574ace33d325d3f8da4@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: BZ Family BUS_MASTER_DISABLE_REQ code duplicationRoee Goldfiner
Remove redundant code which occurs anyway in a later stage and add msleep(100) which is required after disable request. Signed-off-by: Roee Goldfiner <roee.h.goldfiner@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017162352.46183bcd6549.Ie05161496810d3f28fb9d1fecb5f8593889ed2c6@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: yoyo: fw debug config from context info and presetMukesh Sisodiya
Add new TLV for debug config set to read preset based on TLV is set in context info. This is needed to set the preset based on ucode in early trigger point. Add DRAM frag allocation info in first fragment of DBGC1 with all details. New capability from FW for DBGC frag debug support is added and BUFFER_ALLOCATION_CMD is disabled in capability is supported. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.cacf0babc521.If3704b5fda09b344e3e438252360898a3f2e90fa@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Support new version of ranging response notificationMiri Korenblit
As part of the new rate_n_flags, FW added a new version for LOCATION_RANGE_RSP_NTFY, and it's internal structure - LOCATION_RANGE_RSP_AP_ETRY_NTFY. Add support for this. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.c5c6c863631e.I4b493f4eeabbfa1dc965ae012b72fc57de7d5f4f@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Support version 3 of tlc_update_notif.Miri Korenblit
As part of the new rate_n_flags, a new version of tlc_update_notif was added in FW in order to support the new rate_n_flags. Add support for the new version, and move the all API to use the new rate_n_flags only (if FW supports the old one - convert it). Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.9fc0cb5d5898.I1f88e02317f79f1be7f792c01236d836045a44b3@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: convert old rate & flags to the new format.Miri Korenblit
As part of the new rate & flags, convert an old format rate to the new. This is needed if the driver supports the new format but the FW supports the old one. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.1ea5263dafec.Iadffe7cb26554d4c23c9242eb2ec8326306202a9@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: add definitions for new rate & flagsMiri Korenblit
As a part of preparing to the new rate & flags, add new needed definitions. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.41563bea6610.I51a886fa75cca723c81877b386ba41b2a9db1122@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: update definitions due to new rate & flagsMiri Korenblit
As a part of preparing to the new rate & flags version Update the relevant definitions and use them. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.5862bf4f14c4.Ib476b5443faa085539b79d49a0aebd81a213b42f@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: scrub key material in firmware dumpsJohannes Berg
Use the previously added infrastructure to scrub key material in firmware dumps: * in the TX FIFO data, just search for each key that we know about and override such data * scrub various commands that we sent to the firmware if they're present * in firmware memory, where advertised by firmware TLVs Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.d1514964e6a7.I18f8c2ce8082952af7cfe5f8fe75fe51851b8853@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: parse debug exclude data from firmware fileJohannes Berg
Parse the memory dump exclusion TLVs from the firmware file and save the data to be able to apply them later upon dump. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.ec280bcb32cb.Iac0da0e22d7c3c0e237867c9113a06ddd95c7a51@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: fw dump: add infrastructure for dump scrubbingJohannes Berg
In firmware dumps, currently all kinds of key material may be included, e.g. in host commands (if firmware crashes during the processing of a key-related command) or in the TX FIFO(s) if we have been using in-TX-command key material. Additionally, some firmware versions will advertise sections of their internal data to not dump, due to them containing some sensitive data. Add some infrastructure to allow scrubbing this data out, as dependent on the opmode's idea of what will need to be done. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.360cc8fe55b1.Ie3bd3ece38043969f7e116e61a6ec1197a58d78b@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: correct sta-state logic for TDLSJohannes Berg
For TDLS stations, much of the sta-state logic shouldn't apply, since they don't affect the link to the AP. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.954001ec079f.I9deb8bc7520ad569a453f72c8d99adc9c99c9be3@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: api: fix struct iwl_wowlan_status_v7 kernel-docJohannes Berg
This was mislabeled as struct iwl_wowlan_status, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.f2ff92fcbe4d.Id2b8edd2160d9a703a7a2744e1139017cfd958c0@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: fix fw/img.c license statementJohannes Berg
We still had the entire license statement here, but with BSD, so the SPDX tag was not matching the actual text. Fix that and remove all the texts since they're no longer needed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017123741.328c2b33081c.Ib3570e8f214538a878204cc2b0b612b5ed0571b3@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: remove contact informationJohannes Berg
The list address is going away, and the postal address isn't useful, remove all the contact information. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017113927.f73e3b6384cb.I967fd394995461277eafa149bb25cefd1673751e@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: remove MODULE_AUTHOR() statementsJohannes Berg
Consensus seems to be emerging that corporations or groups shouldn't be listed as module authors, and we will not maintain this email address any longer. Just remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017113927.32109514aad0.I91a7d745f4ab50ee8ef918ece00dda8251541595@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: api: remove unused RX status bitsJohannes Berg
These bits are unused and don't actually exist in the firmware API any longer. Remove them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017113927.022a9f87fdbd.Iae7b8a0196b6e94f9dc525e92a541a28374b0cac@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: add some missing kernel-doc in struct iwl_fwJohannes Berg
The phy integration string members were missed, add them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017113927.8aa65feeda5f.Idf492c939f7f8856da09c5017c16b8b88438395d@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: Remove antenna c referencesMiri Korenblit
Since antenna c is not in use and won't be relevant after the new rate & flags, remove all it's references Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017113927.5e39106ec75b.I4281edc844f734bf9591396a5cc8009ad37ccda8@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: add support for 160Mhz in ranging measurementsAvraham Stern
Add support for 160Mhz bandwidth in ranging measurements for initiator and responder. Advertise 160Mhz in the supported bandwidths for ranging. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017113927.32a13ac0f4d4.I883492648518cc5067a2f91b7ecf8bfa55f6876a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: add vendor specific capabilities for some RFsJohannes Berg
On some RFs we want to advertise vendor specific capabilities to indicate support for improved beamforming rates and/or on 160 MHz, some APs where Intel has collaborated with the vendor will use it to improve behaviour. Add these elements where relevant, i.e. for HR and GF RFs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017113927.510f0ef9c2d5.If99bdb9009583ac7cc6cbb708e871a67df836dbe@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: add lmac/umac PC info in case of errorMordechay Goodstein
Currently it's only added to 22000 family in this patch we also add it to 9000 family where it's also relevant. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017113927.e51c61b31037.I118299d9d6eeef211cc8d4ee72193fdddc54d446@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: disable RX-diversity in powersaveJohannes Berg
Just like we have default SMPS mode as dynamic in powersave, we should not enable RX-diversity in powersave, to reduce power consumption when connected to a non-MIMO AP. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017113927.fc896bc5cdaa.I1d11da71b8a5cbe921a37058d5f578f1b14a2023@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: mvm: fix ieee80211_get_he_iftype_cap() iftypeJohannes Berg
We should consider the P2P interface type, which isn't in vif->type due to mac80211's special handling of that. Use ieee80211_vif_type_p2p() to convert appropriately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211017113927.8e992a3beee2.I4231ac8a7ae8f844e35a1ec221baf3e2b676e765@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: Start scratch debug register for Bz familyMatti Gottlieb
Start scratch debug register for Bz family. This register is used for FW debug, and the driver should start this register with a fixed value, during init, and upon an error, should read it, and add it to the dump. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.609ad58a49f3.I05c351233601ecc51dddfa5df69ace292216eb95@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: Add support for more BZ HWsMatti Gottlieb
Add support for GA and for BZ with FM rf. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.64ab5278fb9f.I4f2a547dc04c3d14cacdbc739da0b056fc04923d@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-22iwlwifi: Add support for getting rf id with blank otpMatti Gottlieb
When having a blank OTP the only way to get the rf id and the cdb info is from prph registers. Currently there is some implementation for this, but it is located in the wrong place in the code (should be before trying to understand what HW is connected and not after), and it has a partial implementation. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210826224715.820c2ae18c2b.Iec9b2e2615ce65e6aff5ce896589227a7030f4cf@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-10-21Merge tag 'drm-fixes-2021-10-22' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Nothing too crazy at the end of the cycle, the kmb modesetting fixes are probably a bit large but it's not a major driver, and its fixing monitor doesn't turn on type problems. Otherwise it's just a few minor patches, one ast regression revert, an msm power stability fix. ast: - fix regression with connector detect msm: - fix power stability issue msxfb: - fix crash on unload panel: - sync fix kmb: - modesetting fixes" * tag 'drm-fixes-2021-10-22' of git://anongit.freedesktop.org/drm/drm: Revert "drm/ast: Add detect function support" drm/kmb: Enable ADV bridge after modeset drm/kmb: Corrected typo in handle_lcd_irq drm/kmb: Disable change of plane parameters drm/kmb: Remove clearing DPHY regs drm/kmb: Limit supported mode to 1080p drm/kmb: Work around for higher system clock drm/panel: ilitek-ili9881c: Fix sync for Feixin K101-IM2BYL02 panel drm: mxsfb: Fix NULL pointer dereference crash on unload drm/msm/devfreq: Restrict idle clamping to a618 for now
2021-10-21memblock: exclude MEMBLOCK_NOMAP regions from kmemleakMike Rapoport
Vladimir Zapolskiy reports: Commit a7259df76702 ("memblock: make memblock_find_in_range method private") invokes a kernel panic while running kmemleak on OF platforms with nomaped regions: Unable to handle kernel paging request at virtual address fff000021e00000 [...] scan_block+0x64/0x170 scan_gray_list+0xe8/0x17c kmemleak_scan+0x270/0x514 kmemleak_write+0x34c/0x4ac The memory allocated from memblock is registered with kmemleak, but if it is marked MEMBLOCK_NOMAP it won't have linear map entries so an attempt to scan such areas will fault. Ideally, memblock_mark_nomap() would inform kmemleak to ignore MEMBLOCK_NOMAP memory, but it can be called before kmemleak interfaces operating on physical addresses can use __va() conversion. Make sure that functions that mark allocated memory as MEMBLOCK_NOMAP take care of informing kmemleak to ignore such memory. Link: https://lore.kernel.org/all/8ade5174-b143-d621-8c8e-dc6a1898c6fb@linaro.org Link: https://lore.kernel.org/all/c30ff0a2-d196-c50d-22f0-bd50696b1205@quicinc.com Fixes: a7259df76702 ("memblock: make memblock_find_in_range method private") Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Tested-by: Qian Cai <quic_qiancai@quicinc.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-10-21Merge tag 'net-5.15-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, and can. We'll have one more fix for a socket accounting regression, it's still getting polished. Otherwise things look fine. Current release - regressions: - revert "vrf: reset skb conntrack connection on VRF rcv", there are valid uses for previous behavior - can: m_can: fix iomap_read_fifo() and iomap_write_fifo() Current release - new code bugs: - mlx5: e-switch, return correct error code on group creation failure Previous releases - regressions: - sctp: fix transport encap_port update in sctp_vtag_verify - stmmac: fix E2E delay mechanism (in PTP timestamping) Previous releases - always broken: - netfilter: ip6t_rt: fix out-of-bounds read of ipv6_rt_hdr - netfilter: xt_IDLETIMER: fix out-of-bound read caused by lack of init - netfilter: ipvs: make global sysctl read-only in non-init netns - tcp: md5: fix selection between vrf and non-vrf keys - ipv6: count rx stats on the orig netdev when forwarding - bridge: mcast: use multicast_membership_interval for IGMPv3 - can: - j1939: fix UAF for rx_kref of j1939_priv abort sessions on receiving bad messages - isotp: fix TX buffer concurrent access in isotp_sendmsg() fix return error on FC timeout on TX path - ice: fix re-init of RDMA Tx queues and crash if RDMA was not inited - hns3: schedule the polling again when allocation fails, prevent stalls - drivers: add missing of_node_put() when aborting for_each_available_child_of_node() - ptp: fix possible memory leak and UAF in ptp_clock_register() - e1000e: fix packet loss in burst mode on Tiger Lake and later - mlx5e: ipsec: fix more checksum offload issues" * tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits) usbnet: sanity check for maxpacket net: enetc: make sure all traffic classes can send large frames net: enetc: fix ethtool counter name for PM0_TERR ptp: free 'vclock_index' in ptp_clock_release() sfc: Don't use netif_info before net_device setup sfc: Export fibre-specific supported link modes net/mlx5e: IPsec: Fix work queue entry ethernet segment checksum flags net/mlx5e: IPsec: Fix a misuse of the software parser's fields net/mlx5e: Fix vlan data lost during suspend flow net/mlx5: E-switch, Return correct error code on group creation failure net/mlx5: Lag, change multipath and bonding to be mutually exclusive ice: Add missing E810 device ids igc: Update I226_K device ID e1000e: Fix packet loss on Tiger Lake and later e1000e: Separate TGP board type from SPT ptp: Fix possible memory leak in ptp_clock_register() net: stmmac: Fix E2E delay mechanism nfc: st95hf: Make spi remove() callback return zero net: hns3: disable sriov before unload hclge layer net: hns3: fix vf reset workqueue cannot exit ...
2021-10-22Merge series "regulator: Introduce UniPhier NX1 SoC support" from Kunihiko ↵Mark Brown
Hayashi <hayashi.kunihiko@socionext.com>: This series includes the patches to add basic support for new UniPhier NX1 SoC. NX1 SoC also has the same kinds of controls as the other UniPhier SoCs. Kunihiko Hayashi (2): dt-bindings: regulator: uniphier: Add binding for NX1 SoC regulator: uniphier: Add USB-VBUS compatible string for NX1 SoC .../devicetree/bindings/regulator/socionext,uniphier-regulator.yaml | 1 + drivers/regulator/uniphier-regulator.c | 4 ++++ 2 files changed, 5 insertions(+) -- 2.7.4
2021-10-22Merge series "Initial Fairphone 4 support" from Luca Weiss <luca@z3ntu.xyz>:Mark Brown
This series adds basic support for the recently announced Fairphone 4 smartphone, based on the Snapdragon 750G (sm7225). This adds support for UART, power & volume buttons, screen based on simple-framebuffer, regulators and USB. v2 fixes some stylistic problems in dts and corrects the situation with pm6350 regulator supplies. Luca Weiss (11): clk: qcom: add select QCOM_GDSC for SM6350 dt-bindings: regulator: qcom,rpmh: Add compatible for PM6350 regulator: qcom-rpmh: Add PM6350 regulators dt-bindings: pinctrl: qcom,pmic-gpio: Add compatible for PM6350 pinctrl: qcom: spmi-gpio: Add compatible for PM6350 arm64: dts: qcom: Add PM6350 PMIC arm64: dts: qcom: sm6350: add debug uart dt-bindings: arm: cpus: Add Kryo 570 CPUs dt-bindings: arm: qcom: Document sm7225 and fairphone,fp4 board arm64: dts: qcom: Add SM7225 device tree arm64: dts: qcom: sm7225: Add device tree for Fairphone 4 .../devicetree/bindings/arm/cpus.yaml | 1 + .../devicetree/bindings/arm/qcom.yaml | 6 + .../bindings/pinctrl/qcom,pmic-gpio.yaml | 2 + .../regulator/qcom,rpmh-regulator.yaml | 2 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/pm6350.dtsi | 54 +++ arch/arm64/boot/dts/qcom/sm6350.dtsi | 31 ++ .../boot/dts/qcom/sm7225-fairphone-fp4.dts | 320 ++++++++++++++++++ arch/arm64/boot/dts/qcom/sm7225.dtsi | 16 + drivers/clk/qcom/Kconfig | 1 + drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 1 + drivers/regulator/qcom-rpmh-regulator.c | 32 ++ 12 files changed, 467 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/pm6350.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts create mode 100644 arch/arm64/boot/dts/qcom/sm7225.dtsi -- 2.33.0
2021-10-22Merge series "Add support for the silergy,sy7636a" from Alistair Francis ↵Mark Brown
<alistair@alistair23.me>: v13: - Address comments on thermal driver - Rebase on master (without other patches) v12: - Rebase v11: - Address comments on hwmon - Improve "mfd: simple-mfd-i2c: Add a Kconfig name" commit message v10: - Use dev_get_regmap() instead of dev_get_drvdata() v9: - Convert to use the simple-mfd-i2c instead Alistair Francis (9): dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml mfd: simple-mfd-i2c: Add a Kconfig name mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a regulator: sy7636a: Remove requirement on sy7636a mfd thermal: sy7636a: Add thermal driver for sy7636a hwmon: sy7636a: Add temperature driver for sy7636a ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a ARM: dts: imx7d: remarkable2: Enable silergy,sy7636a ARM: dts: imx7d: remarkable2: Enable lcdif .../bindings/mfd/silergy,sy7636a.yaml | 79 ++++++++++ Documentation/hwmon/sy7636a-hwmon.rst | 24 ++++ arch/arm/boot/dts/imx7d-remarkable2.dts | 136 ++++++++++++++++++ arch/arm/configs/imx_v6_v7_defconfig | 4 + drivers/hwmon/Kconfig | 9 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/sy7636a-hwmon.c | 75 ++++++++++ drivers/mfd/Kconfig | 2 +- drivers/mfd/simple-mfd-i2c.c | 12 ++ drivers/regulator/Kconfig | 1 - drivers/regulator/sy7636a-regulator.c | 2 +- drivers/thermal/Kconfig | 6 + drivers/thermal/Makefile | 1 + drivers/thermal/sy7636a_thermal.c | 94 ++++++++++++ include/linux/mfd/sy7636a.h | 41 ++++++ 15 files changed, 484 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml create mode 100644 Documentation/hwmon/sy7636a-hwmon.rst create mode 100644 drivers/hwmon/sy7636a-hwmon.c create mode 100644 drivers/thermal/sy7636a_thermal.c create mode 100644 include/linux/mfd/sy7636a.h -- 2.31.1
2021-10-21net: ax88796c: ASIX AX88796C SPI Ethernet Adapter DriverŁukasz Stelmach
ASIX AX88796[1] is a versatile ethernet adapter chip, that can be connected to a CPU with a 8/16-bit bus or with an SPI. This driver supports SPI connection. The driver has been ported from the vendor kernel for ARTIK5[2] boards. Several changes were made to adapt it to the current kernel which include: + updated DT configuration, + clock configuration moved to DT, + new timer, ethtool and gpio APIs, + dev_* instead of pr_* and custom printk() wrappers, + removed awkward vendor power managemtn. + introduced ethtool tunable to control SPI compression [1] https://www.asix.com.tw/products.php?op=pItemdetail&PItemID=104;65;86&PLine=65 [2] https://git.tizen.org/cgit/profile/common/platform/kernel/linux-3.10-artik/ The other ax88796 driver is for NE2000 compatible AX88796L chip. These chips are not compatible. Hence, two separate drivers are required. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-21net: enetc: use the skb variable directly in enetc_clean_tx_ring()Vladimir Oltean
The code checks whether the skb had one-step TX timestamping enabled, in order to schedule the work item for emptying the priv->tx_skbs queue. That code checks for "tx_swbd->skb" directly, when we already had a skb retrieved using enetc_tx_swbd_get_skb(tx_swbd) - a TX software BD can also hold an XDP_TX packet or an XDP frame. But since the direct tx_swbd dereference is in an "if" block guarded by the non-NULL quality of "skb", accessing "tx_swbd->skb" directly is not wrong, just confusing. Just use the local variable named "skb". Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-23 23:11:25 +0000