| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes for SPI, small mostly driver specific
things plus a fix for module autoloading which hadn't been working
properly for DT systems"
* tag 'spi-fix-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-quadspi: Fix check condition for DTR ops
spi: mediatek: Fix fifo transfer
spi: imx: mx51-ecspi: Fix CONFIGREG delay comment
spi: imx: mx51-ecspi: Fix low-speed CONFIGREG delay calculation
spi: update modalias_show after of_device_uevent_modalias support
spi: meson-spicc: fix memory leak in meson_spicc_remove
spi: spi-mux: Add module info needed for autoloading
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"A bunch of driver fixes, notably:
- idxd driver fixes for submission race, driver remove sequence,
setup sequence for MSIXPERM, array index and updating descriptor
vector
- usb-dmac, pm reference leak fix
- xilinx_dma, read-after-free fix
- uniphier-xdmac fix for using atomic readl_poll_timeout_atomic()
- of-dma, router_xlate to return
- imx-dma, generic dma fix"
* tag 'dmaengine-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: imx-dma: configure the generic DMA type to make it work
dmaengine: of-dma: router_xlate to return -EPROBE_DEFER if controller is not yet available
dmaengine: stm32-dmamux: Fix PM usage counter unbalance in stm32 dmamux ops
dmaengine: stm32-dma: Fix PM usage counter imbalance in stm32 dma ops
dmaengine: uniphier-xdmac: Use readl_poll_timeout_atomic() in atomic state
dmaengine: idxd: fix submission race window
dmaengine: idxd: fix sequence for pci driver remove() and shutdown()
dmaengine: idxd: fix desc->vector that isn't being updated
dmaengine: idxd: fix setup sequence for MSIXPERM table
dmaengine: idxd: fix array index when int_handles are being used
dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe()
dmaengine: xilinx_dma: Fix read-after-free bug when terminating transfers
|
|
Pull rdma fixes from Jason Gunthorpe:
"Several small recent regressions - rather more than usual, but nothing
too scary. Good to know people are testing.
- Typo causing incorrect operation of the mlx5 mkey cache
expiration
- Revert a CM patch that is breaking some ULPs
- Typo breaking SRQ in rxe
- Revert a rxe patch breaking icrc calculation
- Static checker warning about unbalanced locking in hns
- Subtle cxgb4 regression from a recent atomic to refcount
conversion"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/iw_cxgb4: Fix refcount underflow while destroying cqs.
RDMA/hns: Fix the double unlock problem of poll_sem
RDMA/rxe: Restore setting tot_len in the IPv4 header
RDMA/rxe: Use the correct size of wqe when processing SRQ
RDMA/cma: Revert INIT-INIT patch
RDMA/mlx5: Delay emptying a cache entry when a new MR is added to it recently
|
|
Pull drm fixes from Dave Airlie:
"Regular weekly fixes pull, live from a Brisbane lockdown with kids at
home.
A big bunch of scattered amdgpu fixes, but they are all pretty small,
minor i915 fixes, kmb, and one vmwgfx regression fixes, all pretty
quiet for this time.
amdgpu:
- Fix potential out-of-bounds read when updating GPUVM mapping
- Renoir powergating fix
- Yellow Carp updates
- 8K fix for navi1x
- Beige Goby updates and new DIDs
- Fix DMUB firmware version output
- EDP fix
- pmops config fix
i915:
- Call i915_globals_exit if pci_register_device fails
- (follow on fix for section mismatch)
- Correct SFC_DONE register offset
kmb:
- DMA fix
- driver date/version macros
vmwgfx:
- Fix I/O memory access on 64-bit systems"
* tag 'drm-fixes-2021-08-06' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: add DID for beige goby
drm/amdgpu/display: fix DMUB firmware version info
drm/amd/display: workaround for hard hang on HPD on native DP
drm/amd/display: Fix resetting DCN3.1 HW when resuming from S4
drm/amd/display: Increase stutter watermark for dcn303
drm/amd/display: Fix Dynamic bpp issue with 8K30 with Navi 1X
drm/amd/display: Assume LTTPR interop for DCN31+
drm/amdgpu: fix checking pmops when PM_SLEEP is not enabled
drm/amd/pm: update yellow carp pmfw interface version
drm/i915: fix i915_globals_exit() section mismatch error
drm/i915: Call i915_globals_exit() if pci_register_device() fails
drm/i915: Correct SFC_DONE register offset
drm/vmwgfx: Fix a 64bit regression on svga3
drm/amdgpu: fix the doorbell missing when in CGPG issue for renoir.
drm/amdgpu: Fix out-of-bounds read when update mapping
drm/kmb: Define driver date and major/minor version
drm/kmb: Enable LCD DMA for low TVDDCV
|
|
'vangogh_tables_init()'
'watermarks_table' must be freed instead 'clocks_table', because
'clocks_table' is known to be NULL at this point and 'watermarks_table' is
never freed if the last kzalloc fails.
Fixes: c98ee89736b8 ("drm/amd/pm: add the fine grain tuning function for vangogh")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If the platform uses BOCO, don't use BACO in runtime suspend.
We could end up executing the BACO path if the platform supports
both.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1669
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
update to latest atombios fw table
[Backport to 5.14 - Alex]
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1670
Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Update smu v13.0.1 firmware header for yellow carp.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
gpio-lookup tables
The gpiod_lookup_table.table passed to gpiod_add_lookup_table() must
be terminated with an empty entry, add this.
Note we have likely been getting away with this not being present because
the GPIO lookup code first matches on the dev_id, causing most lookups to
skip checking the table and the lookups which do check the table will
find a matching entry before reaching the end. With that said, terminating
these tables properly still is obviously the correct thing to do.
Fixes: f8eb0235f659 ("x86: pcengines apuv2 gpio/leds/keys platform driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210806115515.12184-1-hdegoede@redhat.com
|
|
360 degree hinges devices with dual KIOX010A + KIOX020A accelerometers
always have both a KIOX010A and a KIOX020A ACPI device (one for each
accel).
Theoretical some vendor may re-use some DSDT for a non-convertible
stripping out just the KIOX020A ACPI device from the DSDT. Check that
both ACPI devices are present to make the check more robust.
Fixes: 153cca9caa81 ("platform/x86: Add and use a dual_accel_detect() helper")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210802141000.978035-1-hdegoede@redhat.com
|
|
The "Arm True Random Number Generator Firmware Interface"[1] provides
an SMCCC based interface to a true hardware random number generator.
So far we are using that in arch_get_random_seed(), but it might be
useful to expose the entropy through the /dev/hwrng device as well. This
allows to assess the quality of the implementation, by using "rngtest"
from the rng-tools package, for example.
Add a simple platform driver implementing the hw_random interface.
The corresponding platform device is created by the SMCCC core code,
we just match it here by name and provide a module alias.
Since the firmware takes care about serialisation, this can happily
coexist with the arch_get_random_seed() bits.
[1] https://developer.arm.com/documentation/den0098/latest/
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
At the moment we probe for the Random Number Generator SMCCC service,
and use that in the core code (arch_get_random). However the hardware
entropy can also be useful to access from userland, and be it to assess
its quality.
Register a platform device when the SMCCC TRNG service is detected, to
allow a hw_random driver to hook onto this.
The function registering the device is deliberately made in a way which
allows expansion, so other services that could be exposed via a platform
device (or some other interface), can be added here easily.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The commit 97f9ac3db6612 ("crypto: ccp - Add support for SEV-ES to the
PSP driver") added support to allocate Trusted Memory Region (TMR)
used during the SEV-ES firmware initialization. The TMR gets locked
during the firmware initialization and unlocked during the shutdown.
While the TMR is locked, access to it is disallowed.
Currently, the CCP driver does not shutdown the firmware during the
kexec reboot, leaving the TMR memory locked.
Register a callback to shutdown the SEV firmware on the kexec boot.
Fixes: 97f9ac3db6612 ("crypto: ccp - Add support for SEV-ES to the PSP driver")
Reported-by: Lucas Nussbaum <lucas.nussbaum@inria.fr>
Tested-by: Lucas Nussbaum <lucas.nussbaum@inria.fr>
Cc: <stable@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit b0a3d8986a76 ("crypto: omap-sham - Use pm_runtime_irq_safe()") added
the use of pm_runtime_irq_safe() as pm_runtime_get_sync() was called
from a tasklet.
We now use the crypto engine queue instead of a custom queue since
commit 33c3d434d91 ("crypto: omap-sham - convert to use crypto engine").
We want to drop the use of pm_runtime_irq_safe() in general as it takes a
permanent usage count on the parent device causing issues for power
management.
Based on testing with CONFIG_DEBUG_ATOMIC_SLEEP=y, modprobe omap-sham,
followed by modprobe tcrypt sec=1 mode=423, I have not been able to
reproduce the scheduling while atomic issue seen earlier with current
kernels and we can just drop the call to pm_runtime_irq_safe().
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Let's get rid of the suspend and resume calls to runtime PM as these calls
do not idle the hardware. The runtime suspend has been disabled for
system suspend since commit 88d26136a256 ("PM: Prevent runtime suspend
during system resume").
Instead of runtime PM, the system suspend and resume functions should call
driver internal shared functions to idle the hardware as needed.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
FLAGS_INIT is now unused and we can just use standard runtime PM
functions instead.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We should pair the usage of pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend().
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Let's only initialize dd->req after omap_sham_hw_init() in case of
errors.
Looks like leaving dd->req initialized on omap_sham_hw_init() errors is
is not causing issues though as we return on errors. So this patch can be
applied as clean-up.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We should not clear FLAGS_DMA_ACTIVE before omap_sham_update_dma_stop() is
done calling dma_unmap_sg(). We already clear FLAGS_DMA_ACTIVE at the
end of omap_sham_update_dma_stop().
The early clearing of FLAGS_DMA_ACTIVE is not causing issues as we do not
need to defer anything based on FLAGS_DMA_ACTIVE currently. So this can be
applied as clean-up.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
On s390, the following build warning occurs:
drivers/net/ethernet/marvell/mvpp2/mvpp2.h:844:2: warning: overflow in
conversion from 'long unsigned int' to 'int' changes value from
'18446744073709551584' to '-32' [-Woverflow]
844 | ((total_size) - MVPP2_SKB_HEADROOM - MVPP2_SKB_SHINFO_SIZE)
This happens because MVPP2_SKB_SHINFO_SIZE, which is 320 bytes (which is
already 64-byte aligned) on some architectures, actually gets ALIGN'd up
to 512 bytes in the s390 case.
So then, when this is invoked:
MVPP2_RX_MAX_PKT_SIZE(MVPP2_BM_SHORT_FRAME_SIZE)
...that turns into:
704 - 224 - 512 == -32
...which is not a good frame size to end up with! The warning above is a
bit lucky: it notices a signed/unsigned bad behavior here, which leads
to the real problem of a frame that is too short for its contents.
Increase MVPP2_BM_SHORT_FRAME_SIZE by 32 (from 704 to 736), which is
just exactly big enough. (The other values can't readily be changed
without causing a lot of other problems.)
Fixes: 07dd0a7aae7f ("mvpp2: add basic XDP support")
Cc: Sven Auhagen <sven.auhagen@voleatech.de>
Cc: Matteo Croce <mcroce@microsoft.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the missing RxUnicast counter.
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no 'NONE' version of 'enum mcu_cipher_type', and returning
'MT_CIPHER_NONE' causes a warning:
drivers/net/wireless/mediatek/mt76/mt7921/mcu.c: In function 'mt7921_mcu_get_cipher':
drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:114:24: error: implicit conversion from 'enum mt76_cipher_type' to 'enum mcu_cipher_type' [-Werror=enum-conversion]
114 | return MT_CIPHER_NONE;
| ^~~~~~~~~~~~~~
Add the missing MCU_CIPHER_NONE defintion that fits in here with
the same value.
Fixes: c368362c36d3 ("mt76: fix iv and CCMP header insertion")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721150745.1914829-1-arnd@kernel.org
|
|
Previous atomic increment/decrement logic expects the atomic count to be
'0' after the final decrement.
Replacing atomic count with refcount does not allow that, as
refcount_dec() considers count of 1 as underflow and triggers a kernel
splat.
Fix the current refcount logic by using the usual pattern of decrementing
the refcount and test if it is '0' on the final deref in
c4iw_destroy_cq(). Use wait_for_completion() instead of wait_event().
Fixes: 7183451f846d ("RDMA/cxgb4: Use refcount_t instead of atomic_t for reference counting")
Link: https://lore.kernel.org/r/1628167412-12114-1-git-send-email-dakshaja@chelsio.com
Signed-off-by: Dakshaja Uppalapati <dakshaja@chelsio.com>
Reviewed-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.14-2021-08-05:
amdgpu:
- Fix potential out-of-bounds read when updating GPUVM mapping
- Renoir powergating fix
- Yellow Carp updates
- 8K fix for navi1x
- Beige Goby updates and new DIDs
- Fix DMUB firmware version output
- EDP fix
- pmops config fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210806011635.1055841-1-alexander.deucher@amd.com
|
|
As GDSCs are registered and found to be already enabled gdsc_init()
ensures that 1) the kernel state matches the hardware state, and 2)
votable GDSCs are properly enabled from this master as well.
But as the (optional) supply regulator is enabled deep into
gdsc_toggle_logic(), which is only executed for votable GDSCs, the
kernel's state of the regulator might not match the hardware. The
regulator might be automatically turned off if no other users are
present or the next call to gdsc_disable() would cause an unbalanced
regulator_disable().
Given that the votable case deals with an already enabled GDSC, most of
gdsc_enable() and gdsc_toggle_logic() can be skipped. Reduce it to just
clearing the SW_COLLAPSE_MASK and enabling hardware control to simply
call regulator_enable() in both cases.
The enablement of hardware control seems to be an independent property
from the GDSC being enabled, so this is moved outside that conditional
segment.
Lastly, as the propagation of ALWAYS_ON to GENPD_FLAG_ALWAYS_ON needs to
happen regardless of the initial state this is grouped together with the
other sc->pd updates at the end of the function.
Cc: stable@vger.kernel.org
Fixes: 37416e554961 ("clk: qcom: gdsc: Handle GDSC regulator supplies")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210721224056.3035016-1-bjorn.andersson@linaro.org
[sboyd@kernel.org: Rephrase commit text]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The earlycon depends on the bootloader setup UART clocks being retained.
There're actually two uart clocks (ipg, per) on MX6QDL,
but the 'Fixes' commit change to register only one which means
another clock may be disabled during booting phase
and result in the earlycon unwork.
Cc: stable@vger.kernel.org # v5.10+
Fixes: 379c9a24cc23 ("clk: imx: Fix reparenting of UARTs not associated with stdout")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20210702085438.1988087-1-aisheng.dong@nxp.com
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add device ids.
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DMUB firmware info is printed before it gets initialized.
Correct this order to ensure true value is conveyed.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
HPD disable and enable sequences are not mutually exclusive
on Linux. For HPDs that spans over 1s (i.e. HPD low = 1s),
part of the disable sequence (specifically, a request to SMU
to lower refclk) could come right before the call to PHY
enable, causing DMUB to access an unresponsive PHY
and thus a hard hang on the system.
[How]
Disable 48mhz refclk off on native DP.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why] On S4 resume we also need to fix detection of when to reload DMCUB
firmware because we're currently using the VBIOS version which isn't
compatible with the driver version.
[How] Update the hardware init check for DCN31 since it's the ASIC that
has this issue.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jude Shih <jude.shih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
Hardware team suggested to use SRExitTime= 35.5us as w/a to prevent
underflow in certain modes.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Bing Guo <bing.guo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Why:
In DCN2x, HW doesn't automatically divide MASTER_UPDATE_LOCK_DB_X
by the number of pipes ODM Combined.
How:
Set MASTER_UPDATE_LOCK_DB_X to the value that is adjusted by the
number of pipes ODM Combined.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Bing Guo <bing.guo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
For DCN31 onward, LTTPR is to be enabled and set to Transparent by
VBIOS. Driver is to assume that VBIOS has done this without needing to
check the VBIOS interop bit.
[HOW]
Add LTTPR enable and interop VBIOS bits into dc->caps, and force-set the
interop bit to true for DCN31+.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
'pm_suspend_target_state' is only available when CONFIG_PM_SLEEP
is set/enabled. OTOH, when both SUSPEND and HIBERNATION are not set,
PM_SLEEP is not set, so this variable cannot be used.
../drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c: In function ‘amdgpu_acpi_is_s0ix_active’:
../drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:1046:11: error: ‘pm_suspend_target_state’ undeclared (first use in this function); did you mean ‘__KSYM_pm_suspend_target_state’?
return pm_suspend_target_state == PM_SUSPEND_TO_IDLE;
^~~~~~~~~~~~~~~~~~~~~~~
__KSYM_pm_suspend_target_state
Also use shorter IS_ENABLED(CONFIG_foo) notation for checking the
2 config symbols.
Fixes: 91e273712ab8dd ("drm/amdgpu: Check pmops for desired suspend state")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-next@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Correct yellow carp driver-PMFW interface version to v4.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from ipsec.
Current release - regressions:
- sched: taprio: fix init procedure to avoid inf loop when dumping
- sctp: move the active_key update after sh_keys is added
Current release - new code bugs:
- sparx5: fix build with old GCC & bitmask on 32-bit targets
Previous releases - regressions:
- xfrm: redo the PREEMPT_RT RCU vs hash_resize_mutex deadlock fix
- xfrm: fixes for the compat netlink attribute translator
- phy: micrel: Fix detection of ksz87xx switch
Previous releases - always broken:
- gro: set inner transport header offset in tcp/udp GRO hook to avoid
crashes when such packets reach GSO
- vsock: handle VIRTIO_VSOCK_OP_CREDIT_REQUEST, as required by spec
- dsa: sja1105: fix static FDB entries on SJA1105P/Q/R/S and SJA1110
- bridge: validate the NUD_PERMANENT bit when adding an extern_learn
FDB entry
- usb: lan78xx: don't modify phy_device state concurrently
- usb: pegasus: check for errors of IO routines"
* tag 'net-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
net: vxge: fix use-after-free in vxge_device_unregister
net: fec: fix use-after-free in fec_drv_remove
net: pegasus: fix uninit-value in get_interrupt_interval
net: ethernet: ti: am65-cpsw: fix crash in am65_cpsw_port_offload_fwd_mark_update()
bnx2x: fix an error code in bnx2x_nic_load()
net: wwan: iosm: fix recursive lock acquire in unregister
net: wwan: iosm: correct data protocol mask bit
net: wwan: iosm: endianness type correction
net: wwan: iosm: fix lkp buildbot warning
net: usb: lan78xx: don't modify phy_device state concurrently
docs: networking: netdevsim rules
net: usb: pegasus: Remove the changelog and DRIVER_VERSION.
net: usb: pegasus: Check the return value of get_geristers() and friends;
net/prestera: Fix devlink groups leakage in error flow
net: sched: fix lockdep_set_class() typo error for sch->seqlock
net: dsa: qca: ar9331: reorder MDIO write sequence
VSOCK: handle VIRTIO_VSOCK_OP_CREDIT_REQUEST
mptcp: drop unused rcu member in mptcp_pm_addr_entry
net: ipv6: fix returned variable type in ip6_skb_dst_mtu
nfp: update ethtool reporting of pauseframe control
...
|
|
buswidth and dtr fields in spi_mem_op are only valid when the
corresponding spi_mem_op phase has a non-zero length. For example,
SPI NAND core doesn't set buswidth when using SPI_MEM_OP_NO_ADDR
phase.
Fix the dtr checks in set_protocol() and suppports_mem_op() to
ignore empty spi_mem_op phases, as checking for dtr field in
empty phase will result in false negatives.
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Link: https://lore.kernel.org/r/20210716232504.182-3-a-nandan@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull pcmcia fix from Dominik Brodowski:
"Zheyu Ma found and fixed a null pointer dereference bug in the device
driver for the i82092 card reader"
* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: i82092: fix a null pointer dereference bug
|
|
probe()
The I2C-bus to the XPower AXP288 is shared between the Linux kernel and
the SoCs P-Unit. The P-Unit has a semaphore which the kernel must "lock"
before it may use the bus. If not explicitly taken by the I2C-driver,
then this semaphore is automatically taken by the I2C-bus-driver for
each I2C-transfer and this is a quite expensive operation.
Explicitly take the semaphore in probe() around the register-accesses
done during probe, so that this only needs to be done once, rather then
once per register-access.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
with the other checks
The I2C-bus to the XPower AXP288 is shared between the Linux kernel and
the SoCs P-Unit. The P-Unit has a semaphore which the kernel must "lock"
before it may use the bus. If not explicitly taken by the I2C-driver,
then this semaphore is automatically taken by the I2C-bus-driver for
each I2C-transfer.
Move the AXP20X_CC_CTRL check done in probe() together with the other
register-accesses done in probe, so that we can take the semaphore once
for the entire set of register-accesses.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The I2C-bus to the XPower AXP288 is shared between the Linux kernel and
the SoCs P-Unit. The P-Unit has a semaphore which the kernel must "lock"
before it may use the bus and while the kernel holds the semaphore the CPU
and GPU power-states must not be changed otherwise the system will freeze.
This is a complex process, which is quite expensive. This is all done by
iosf_mbi_block_punit_i2c_access(). To ensure that no unguarded I2C-bus
accesses happen, iosf_mbi_block_punit_i2c_access() gets called by the
I2C-bus-driver for every I2C transfer. Because this is so expensive it
is allowed to call iosf_mbi_block_punit_i2c_access() in a nested
fashion, so that higher-level code which does multiple I2C-transfers can
call it once for a group of transfers, turning the calls done by the
I2C-bus-driver into no-ops.
Userspace power-supply API users typically will read all provided
properties in one go, refreshing the last read values when
power_supply_changed() is called by the driver and/or periodically
(e.g. every 2 minutes).
The reading of all properties in one go causes the P-Unit semaphore
to quickly be taken and released multiple times in a row. Certain
PMIC registers like AXP20X_FG_RES are even used in multiple properties
so they get read multiple times, leading to a P-Unit take + release
each time the register is read.
As already mentioned the taking of the P-Unit semaphore is a quite
expensive operation and it has also been reported that the
"hammering" of the P-Unit semaphore done by the axp288_fuel_gauge
driver can even cause stability issues with the system as a whole.
Switch over to a scheme where the axp288_fuel_gauge driver keeps
a local copy of all the registers which it uses for properties
and make it only refresh its copy of the registers if the values
are older then 1 minute; or when a fuel-gauge interrupt has
triggered since the last read.
This not only reduces the amount of reads, it also makes the code
do all the reads in one go, rather then reading specific registers
based on which property is being queried. This allows calling
iosf_mbi_block_punit_i2c_access() once before doing all the reads,
so that we now only take the P-Unit semaphore once per update.
Tested-by: Andrejus Basovas <cpp@gcc.lt>
Signed-off-by: Andrejus Basovas <cpp@gcc.lt>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
once
Accessing registers on the AXP288 is quite expensive, so we should avoid
doing unnecessary accesses.
The FG_LOW_CAP_REG never changes underneath us, so we only need to read
it once. Devices with an AXP288 do not have user-replace (let alone
hot-swappable) batteries and the only bit we care about in the
PWR_OP_MODE register is the CHRG_STAT_BAT_PRESENT bit, so we can get
away with only reading the PWR_OP_MODE register once too.
Note that the FG_LOW_CAP_REG is not marked volatile in the regmap, so we
were effectively already reading it once. This change makes this explicit,
this is done as preparation of a further patch which moves all remaining
register accesses in fuel_gauge_get_property() out of that function.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Directly store the struct device pointer in axp288_fg_info, rather then
storing a pointer to the struct platform_device there and then using
"&info->pdev->dev" everywhere.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The I2C-bus to the XPower AXP288 is shared between the Linux kernel and
the SoCs P-Unit. The P-Unit has a semaphore which the kernel must "lock"
before it may use the bus. This semaphore is automatically taken by the
I2C-bus-driver.
The retry on -EBUSY logic in fuel_gauge_reg_readb() likely was added to
deal with the I2C-bus-drive returning -EBUSY when it failed to take the
semaphore, but this really should never happen. The semaphore code even
has a WARN_ON(ret) to log a kernel backtrace if this does somehow happen,
when this happens something is seriously wrong and the system typically
freezes soon afterwards.
TL;DR: the regmap_read() should never fail with -EBUSY so the retries
are unnecessary.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
errors
When fuel_gauge_reg_readb()/_writeb() fails, report which register we
were trying to read / write when the error happened.
Also reword the message a bit:
- Drop the axp288 prefix, dev_err() already prints this
- Switch from telegram / abbreviated style to a normal sentence, aligning
the message with those from fuel_gauge_read_*bit_word()
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Drop the IRQ mapping messages, because they are really not
interesting at all.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The debugfs code is simply just dumping a bunch of registers, the same
information can also easily be gotten through the regmap debugfs
interface or through the i2cdump utility.
I've not used the debugfs interface once in all these years that I've
been working on the axp288_fuel_gauge driver, so lets just remove it.
Note this also removes the temperature-channels from the list of
IIO ADC channels used by the driver, since these were only used in the
debugfs interface.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The values of various defines used in the driver are not aligned
properly when tabsize is set to 8 (I guess they were created with
a different tabsize).
Properly align the defines to make the code easier to read.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
In the function sc27xx_fgu_probe(), when get irq failed,
platform_get_irq() logs an error message, so remove
redundant message here.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
This patch modified set_cs_timing parameter, no need pass in spi_delay
to set_cs_timing callback.
By the way, we modified the mediatek and tegra114 spi driver to fix build err.
In mediatek spi driver, We have support set absolute time not clk_count,
and call this function in prepare_message not user's API.
Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
Link: https://lore.kernel.org/r/20210804133746.6742-1-Mason.Zhang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
