summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-07-19Drivers: hv: vmbus: Fix duplicate CPU assignments within a deviceHaiyang Zhang
The vmbus module uses a rotational algorithm to assign target CPUs to a device's channels. Depending on the timing of different device's channel offers, different channels of a device may be assigned to the same CPU. For example on a VM with 2 CPUs, if NIC A and B's channels are offered in the following order, NIC A will have both channels on CPU0, and NIC B will have both channels on CPU1 -- see below. This kind of assignment causes RSS load that is spreading across different channels to end up on the same CPU. Timing of channel offers: NIC A channel 0 NIC B channel 0 NIC A channel 1 NIC B channel 1 VMBUS ID 14: Class_ID = {f8615163-df3e-46c5-913f-f2d2f965ed0e} - Synthetic network adapter Device_ID = {cab064cd-1f31-47d5-a8b4-9d57e320cccd} Sysfs path: /sys/bus/vmbus/devices/cab064cd-1f31-47d5-a8b4-9d57e320cccd Rel_ID=14, target_cpu=0 Rel_ID=17, target_cpu=0 VMBUS ID 16: Class_ID = {f8615163-df3e-46c5-913f-f2d2f965ed0e} - Synthetic network adapter Device_ID = {244225ca-743e-4020-a17d-d7baa13d6cea} Sysfs path: /sys/bus/vmbus/devices/244225ca-743e-4020-a17d-d7baa13d6cea Rel_ID=16, target_cpu=1 Rel_ID=18, target_cpu=1 Update the vmbus CPU assignment algorithm to avoid duplicate CPU assignments within a device. The new algorithm iterates num_online_cpus + 1 times. The existing rotational algorithm to find "next NUMA & CPU" is still here. But if the resulting CPU is already used by the same device, it will try the next CPU. In the last iteration, it assigns the channel to the next available CPU like the existing algorithm. This is not normally expected, because during device probe, we limit the number of channels of a device to be <= number of online CPUs. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1626459673-17420-1-git-send-email-haiyangz@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-07-19drm/nouveau: init the base GEM fields for internal BOsChristian König
TTMs buffer objects are based on GEM objects for quite a while and rely on initializing those fields before initializing the TTM BO. Nouveau now doesn't init the GEM object for internally allocated BOs, so make sure that we at least initialize some necessary fields. Signed-off-by: Christian König <christian.koenig@amd.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210609172902.1937-1-christian.koenig@amd.com
2021-07-18scsi: target: Fix protect handling in WRITE SAME(32)Dmitry Bogdanov
WRITE SAME(32) command handling reads WRPROTECT at the wrong offset in 1st byte instead of 10th byte. Link: https://lore.kernel.org/r/20210702091655.22818-1-d.bogdanov@yadro.com Fixes: afd73f1b60fc ("target: Perform PROTECT sanity checks for WRITE_SAME") Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-18scsi: iscsi: Fix iface sysfs attr detectionMike Christie
A ISCSI_IFACE_PARAM can have the same value as a ISCSI_NET_PARAM so when iscsi_iface_attr_is_visible tries to figure out the type by just checking the value, we can collide and return the wrong type. When we call into the driver we might not match and return that we don't want attr visible in sysfs. The patch fixes this by setting the type when we figure out what the param is. Link: https://lore.kernel.org/r/20210701002559.89533-1-michael.christie@oracle.com Fixes: 3e0f65b34cc9 ("[SCSI] iscsi_transport: Additional parameters for network settings") Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-18Revert "gpio: mpc8xxx: change the gpio interrupt flags."Rasmus Villemoes
This reverts commit 3d5bfbd9716318b1ca5c38488aa69f64d38a9aa5. When booting with threadirqs, it causes a splat WARNING: CPU: 0 PID: 29 at kernel/irq/handle.c:159 __handle_irq_event_percpu+0x1ec/0x27c irq 66 handler irq_default_primary_handler+0x0/0x1c enabled interrupts That splat later went away with commit 81e2073c175b ("genirq: Disable interrupts for force threaded handlers"), which got backported to -stable. However, when running an -rt kernel, the splat still exists. Moreover, quoting Thomas Gleixner [1] But 3d5bfbd97163 ("gpio: mpc8xxx: change the gpio interrupt flags.") has nothing to do with that: "Delete the interrupt IRQF_NO_THREAD flags in order to gpio interrupts can be threaded to allow high-priority processes to preempt." This changelog is blatantly wrong. In mainline forced irq threads have always been invoked with softirqs disabled, which obviously makes them non-preemptible. So the patch didn't even do what its commit log said. [1] https://lore.kernel.org/lkml/871r8zey88.ffs@nanos.tec.linutronix.de/ Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-07-17Merge tag 'soc-fixes-5.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Here are the patches for this week that came as the fallout of the merge window: - Two fixes for the NVidia memory controller driver - multiple defconfig files get patched to turn CONFIG_FB back on after that is no longer selected by CONFIG_DRM - ffa and scmpi firmware drivers fixes, mostly addressing compiler and documentation warnings - Platform specific fixes for device tree files on ASpeed, Renesas and NVidia SoC, mostly for recent regressions. - A workaround for a regression on the USB PHY with devlink when the usb-nop-xceiv driver is not available until the rootfs is mounted. - Device tree compiler warnings in Arm Versatile-AB" * tag 'soc-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits) ARM: dts: versatile: Fix up interrupt controller node names ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in ARM: configs: Update u8500_defconfig ARM: configs: Update Vexpress defconfig ARM: configs: Update Versatile defconfig ARM: configs: Update RealView defconfig ARM: configs: Update Integrator defconfig arm: Typo s/PCI_IXP4XX_LEGACY/IXP4XX_PCI_LEGACY/ firmware: arm_scmi: Fix range check for the maximum number of pending messages firmware: arm_scmi: Avoid padding in sensor message structure firmware: arm_scmi: Fix kernel doc warnings about return values firmware: arm_scpi: Fix kernel doc warnings firmware: arm_scmi: Fix kernel doc warnings ARM: shmobile: defconfig: Restore graphical consoles firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflow firmware: arm_ffa: Fix the comment style firmware: arm_ffa: Simplify probe function firmware: arm_ffa: Ensure drivers provide a probe function firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow firmware: arm_scmi: Ensure drivers provide a probe function ...
2021-07-17Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "One core fix for an oops which can occur if the error handling thread fails to start for some reason and the driver is removed. The other fixes are all minor ones in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Add missing host_lock in ufshcd_vops_setup_xfer_req() scsi: mpi3mr: Fix W=1 compilation warnings scsi: pm8001: Clean up kernel-doc and comments scsi: zfcp: Report port fc_security as unknown early during remote cable pull scsi: core: Fix bad pointer dereference when ehandler kthread is invalid scsi: fas216: Fix a build error scsi: core: Fix the documentation of the scsi_execute() time parameter
2021-07-17iio: adis: set GPIO reset pin directionAntti Keränen
Set reset pin direction to output as the reset pin needs to be an active low output pin. Co-developed-by: Hannu Hartikainen <hannu@hrtk.in> Signed-off-by: Hannu Hartikainen <hannu@hrtk.in> Signed-off-by: Antti Keränen <detegr@rbx.email> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Fixes: ecb010d44108 ("iio: imu: adis: Refactor adis_initial_startup") Link: https://lore.kernel.org/r/20210708095425.13295-1-detegr@rbx.email Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-07-17iio: adc: ti-ads7950: Ensure CS is deasserted after reading channelsUwe Kleine-König
The ADS7950 requires that CS is deasserted after each SPI word. Before commit e2540da86ef8 ("iio: adc: ti-ads7950: use SPI_CS_WORD to reduce CPU usage") the driver used a message with one spi transfer per channel where each but the last one had .cs_change set to enforce a CS toggle. This was wrongly translated into a message with a single transfer and .cs_change set which results in a CS toggle after each word but the last which corrupts the first adc conversion of all readouts after the first readout. Fixes: e2540da86ef8 ("iio: adc: ti-ads7950: use SPI_CS_WORD to reduce CPU usage") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210709101110.1814294-1-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-07-17platform/x86: think-lmi: Fix possible mem-leaks on tlmi_analyze() error-exitHans de Goede
Fix 2 possible memleaks on error-exits from tlmi_analyze(): 1. If the kzalloc of pwd_power fails, then not only free the atributes, but also the allocated pwd_admin struct. 2. Freeing the attributes should also free the possible_values strings. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210717143607.3580-3-hdegoede@redhat.com
2021-07-17platform/x86: think-lmi: Split kobject_init() and kobject_add() callsHans de Goede
tlmi_sysfs_init() calls tlmi_release_attr() on errors which calls kobject_put() for attributes created by tlmi_analyze(), but if we bail early because of an error, then this means that some of the kobjects will not have been initialized yet; and we should thus not call kobject_put() on them. Switch from using kobject_init_and_add() inside tlmi_sysfs_init() to initializing all the created kobjects directly in tlmi_analyze() and only adding them from tlmi_sysfs_init(). This way all kobjects will always be initialized when tlmi_release_attr() gets called. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210717143607.3580-2-hdegoede@redhat.com
2021-07-17platform/x86: think-lmi: Move pending_reboot_attr to the attributes sysfs dirMark Pearson
Move the pending_reboot node under attributes dir where it should live, as documented in: Documentation/ABI/testing/sysfs-class-firmware-attributes. Also move the create / remove code to be together with the other code populating / cleaning the attributes sysfs dir. In the removal path this is necessary so that the remove is done before the kset_unregister(tlmi_priv.attribute_kset) call. Signed-off-by: Mark Pearson <markpearson@lenovo.com> Co-developed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210717143607.3580-1-hdegoede@redhat.com
2021-07-17platform/x86: amd-pmc: Fix undefined reference to __udivdi3Shyam Sundar S K
It was reported that on i386 config ------ on i386: ld: drivers/platform/x86/amd-pmc.o: in function `s0ix_stats_show': amd-pmc.c:(.text+0x100): undefined reference to `__udivdi3' ------- The reason for this is that 64-bit integer division is not supported on 32-bit architecture. Use do_div macro to fix this. Fixes: b9a4fa6978be ("platform/x86: amd-pmc: Add support for logging s0ix counters") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> # and build-tested Link: https://lore.kernel.org/r/20210716153802.2929670-1-Shyam-sundar.S-k@amd.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-07-16bonding: fix build issueMahesh Bandewar
The commit 9a5605505d9c (" bonding: Add struct bond_ipesc to manage SA") is causing following build error when XFRM is not selected in kernel config. lld: error: undefined symbol: xfrm_dev_state_flush >>> referenced by bond_main.c:3453 (drivers/net/bonding/bond_main.c:3453) >>> net/bonding/bond_main.o:(bond_netdev_event) in archive drivers/built-in.a Fixes: 9a5605505d9c (" bonding: Add struct bond_ipesc to manage SA") Signed-off-by: Mahesh Bandewar <maheshb@google.com> CC: Taehee Yoo <ap420073@gmail.com> CC: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16Merge tag 'scmi-fixes-5.14' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes ARM SCMI fixes for v5.14 A small set of fixes: - adding check for presence of probe while registering the driver to prevent NULL pointer access - dropping the duplicate check as the driver core already takes care of it - fix for possible scmi_linux_errmap buffer overflow - fix to avoid sensor message structure padding - fix the range check for the maximum number of pending SCMI messages - fix for various kernel-doc warnings * tag 'scmi-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Fix range check for the maximum number of pending messages firmware: arm_scmi: Avoid padding in sensor message structure firmware: arm_scmi: Fix kernel doc warnings about return values firmware: arm_scpi: Fix kernel doc warnings firmware: arm_scmi: Fix kernel doc warnings firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow firmware: arm_scmi: Ensure drivers provide a probe function firmware: arm_scmi: Simplify device probe function on the bus Link: https://lore.kernel.org/r/20210714165831.2617437-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-16Merge tag 'arm-ffa-fixes-5.14' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm FF-A fixes for v5.14 A small set of fixes: - adding check for presence of probe while registering the driver to prevent NULL pointer access - dropping the duplicate check as the driver core already takes care of it - fixing possible ffa_linux_errmap buffer overflow and - fixing kernel-doc warning for comment style * tag 'arm-ffa-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflow firmware: arm_ffa: Fix the comment style firmware: arm_ffa: Simplify probe function firmware: arm_ffa: Ensure drivers provide a probe function Link: https://lore.kernel.org/r/20210714165806.2617325-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-16mt7530 fix mt7530_fdb_write vid missing ivl bitEric Woudstra
According to reference guides mt7530 (mt7620) and mt7531: NOTE: When IVL is reset, MAC[47:0] and FID[2:0] will be used to read/write the address table. When IVL is set, MAC[47:0] and CVID[11:0] will be used to read/write the address table. Since the function only fills in CVID and no FID, we need to set the IVL bit. The existing code does not set it. This is a fix for the issue I dropped here earlier: http://lists.infradead.org/pipermail/linux-mediatek/2021-June/025697.html With this patch, it is now possible to delete the 'self' fdb entry manually. However, wifi roaming still has the same issue, the entry does not get deleted automatically. Wifi roaming also needs a fix somewhere else to function correctly in combination with vlan. Signed-off-by: Eric Woudstra <ericwouds@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-16Merge tag 'block-5.14-2021-07-16' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe fixes via Christoph: - fix various races in nvme-pci when shutting down just after probing (Casey Chen) - fix a net_device leak in nvme-tcp (Prabhakar Kushwaha) - Fix regression in xen-blkfront by cleaning up the removal state machine (Christoph) - Fix tag_set and queue cleanup ordering regression in nbd (Wang) - Fix tag_set and queue cleanup ordering regression in pd (Guoqing) * tag 'block-5.14-2021-07-16' of git://git.kernel.dk/linux-block: xen-blkfront: sanitize the removal state machine nbd: fix order of cleaning up the queue and freeing the tagset pd: fix order of cleaning up the queue and freeing the tagset nvme-pci: do not call nvme_dev_remove_admin from nvme_remove nvme-pci: fix multiple races in nvme_setup_io_queues nvme-tcp: use __dev_get_by_name instead dev_get_by_name for OPT_HOST_IFACE
2021-07-16drm/amd/display: Fix 10bit 4K display on CIK GPUsLiviu Dudau
Commit 72a7cf0aec0c ("drm/amd/display: Keep linebuffer pixel depth at 30bpp for DCE-11.0.") doesn't seems to have fixed 10bit 4K rendering over DisplayPort for CIK GPUs. On my machine with a HAWAII GPU I get a broken image that looks like it has an effective resolution of 1920x1080 but scaled up in an irregular way. Reverting the commit or applying this patch fixes the problem on v5.14-rc1. Fixes: 72a7cf0aec0c ("drm/amd/display: Keep linebuffer pixel depth at 30bpp for DCE-11.0.") Acked-by: Mario Kleiner <mario.kleiner.de@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Liviu Dudau <liviu@dudau.co.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-16drm/amd/pm: update DRIVER_IF_VERSION for beige_gobyTao Zhou
Update the version to 0xD for beige_goby. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-16drm/amdgpu: update gc golden setting for dimgrey_cavefishTao Zhou
Update gc_10_3_4 golden setting. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-07-16drm/amdgpu: update golden setting for sienna_cichlidLikun Gao
Update GFX golden setting for sienna_cichlid. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-07-16drm/amdgpu: update the golden setting for vangoghXiaojian Du
This patch is to update the golden setting for vangogh. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-07-16amdgpu/nv.c - Optimize code for video codec support structureVeerabadhran Gopalakrishnan
Optimized the code for codec info structure initialization Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-16amdgpu/nv.c - Added video codec support for Yellow CarpVeerabadhran Gopalakrishnan
Added the supported codecs in the video capabilities query. Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-16Merge tag 'drm-fixes-2021-07-16' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Regular rc2 fixes though a bit more than usual at rc2 stage, people must have been testing early or else some fixes from last week got a bit laggy. There is one larger change in the amd fixes to amalgamate some power management code on the newer chips with the code from the older chips, it should only affects chips where support was introduced in rc1 and it should make future fixes easier to maintain probably a good idea to merge it now. Otherwise it's mostly fixes across the board. dma-buf: - Fix fence leak in sync_file_merge() error code drm/panel: - nt35510: Don't fail on DSI reads fbdev: - Avoid use-after-free by not deleting current video mode ttm: - Avoid NULL-ptr deref in ttm_range_man_fini() vmwgfx: - Fix a merge commit qxl: - fix a TTM regression amdgpu: - SR-IOV fixes - RAS fixes - eDP fixes - SMU13 code unification to facilitate fixes in the future - Add new renoir DID - Yellow Carp fixes - Beige Goby fixes - Revert a bunch of TLB fixes that caused regressions - Revert an LTTPR display regression amdkfd - Fix VRAM access regression - SVM fixes i915: - Fix -EDEADLK handling regression - Drop the page table optimisation" * tag 'drm-fixes-2021-07-16' of git://anongit.freedesktop.org/drm/drm: (29 commits) drm/amdgpu: add another Renoir DID drm/ttm: add a check against null pointer dereference drm/i915/gtt: drop the page table optimisation drm/i915/gt: Fix -EDEADLK handling regression drm/amd/pm: Add waiting for response of mode-reset message for yellow carp Revert "drm/amdkfd: Add heavy-weight TLB flush after unmapping" Revert "drm/amdgpu: Add table_freed parameter to amdgpu_vm_bo_update" Revert "drm/amdkfd: Make TLB flush conditional on mapping" Revert "drm/amdgpu: Fix warning of Function parameter or member not described" Revert "drm/amdkfd: Add memory sync before TLB flush on unmap" drm/amd/pm: Fix BACO state setting for Beige_Goby drm/amdgpu: Restore msix after FLR drm/amdkfd: Allow CPU access for all VRAM BOs drm/amdgpu/display - only update eDP's backlight level when necessary drm/amdkfd: handle fault counters on invalid address drm/amdgpu: Correct the irq numbers for virtual crtc drm/amd/display: update header file name drm/amd/pm: drop smu_v13_0_1.c|h files for yellow carp drm/amd/display: remove faulty assert Revert "drm/amd/display: Always write repeater mode regardless of LTTPR" ...
2021-07-16spi: cadence-quadspi: Disable Auto-HW pollingApurva Nandan
cadence-quadspi has a builtin Auto-HW polling funtionality using which it keep tracks of completion of write operations. When Auto-HW polling is enabled, it automatically initiates status register read operation, until the flash clears its busy bit. cadence-quadspi controller doesn't allow an address phase when auto-polling the busy bit on the status register. Unlike SPI NOR flashes, SPI NAND flashes do require the address of status register when polling the busy bit using the read register operation. As Auto-HW polling is enabled by default, cadence-quadspi returns a timeout for every write operation after an indefinite amount of polling on SPI NAND flashes. Disable Auto-HW polling completely as the spi-nor core, spinand core, etc. take care of polling the busy bit on their own. Signed-off-by: Apurva Nandan <a-nandan@ti.com> Link: https://lore.kernel.org/r/20210713125743.1540-2-a-nandan@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-16efi/libstub: Fix the efi_load_initrd function descriptionAtish Patra
The soft_limit and hard_limit in the function efi_load_initrd describes the preferred and max address of initrd loading location respectively. However, the description wrongly describes it as the size of the allocated memory. Fix the function description. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2021-07-16firmware/efi: Tell memblock about EFI iomem reservationsMarc Zyngier
kexec_load_file() relies on the memblock infrastructure to avoid stamping over regions of memory that are essential to the survival of the system. However, nobody seems to agree how to flag these regions as reserved, and (for example) EFI only publishes its reservations in /proc/iomem for the benefit of the traditional, userspace based kexec tool. On arm64 platforms with GICv3, this can result in the payload being placed at the location of the LPI tables. Shock, horror! Let's augment the EFI reservation code with a memblock_reserve() call, protecting our dear tables from the secondary kernel invasion. Reported-by: Moritz Fischer <mdf@kernel.org> Tested-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2021-07-16efi/tpm: Differentiate missing and invalid final event log table.Michal Suchanek
Missing TPM final event log table is not a firmware bug. Clearly if providing event log in the old format makes the final event log invalid it should not be provided at least in that case. Fixes: b4f1874c6216 ("tpm: check event log version before reading final events") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2021-07-16spi: spi-cadence-quadspi: Fix division by zero warningYoshitaka Ikeda
Fix below division by zero warning: - The reason for dividing by zero is because the dummy bus width is zero, but if the dummy n bytes is zero, it indicates that there is no data transfer, so we can just return zero without doing any calculations. [ 0.795337] Division by zero in kernel. : [ 0.834051] [<807fd40c>] (__div0) from [<804e1acc>] (Ldiv0+0x8/0x10) [ 0.839097] [<805f0710>] (cqspi_exec_mem_op) from [<805edb4c>] (spi_mem_exec_op+0x3b0/0x3f8) Fixes: 7512eaf54190 ("spi: cadence-quadspi: Fix dummy cycle calculation when buswidth > 1") Signed-off-by: Yoshitaka Ikeda <ikeda@nskint.co.jp> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/92eea403-9b21-2488-9cc1-664bee760c5e@nskint.co.jp Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-16spi: spi-cadence-quadspi: Revert "Fix division by zero warning"Yoshitaka Ikeda
Revert to change to a better code. This reverts commit 55cef88bbf12f3bfbe5c2379a8868a034707e755. Signed-off-by: Yoshitaka Ikeda <ikeda@nskint.co.jp> Link: https://lore.kernel.org/r/bd30bdb4-07c4-f713-5648-01c898d51f1b@nskint.co.jp Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-16power: supply: cw2015: use dev_err_probe to allow deferred probePeter Robinson
Deal with deferred probe using dev_err_probe so the error is handled and avoid logging lots probe defer information like the following: [ 9.125121] cw2015 4-0062: Failed to register power supply [ 9.211131] cw2015 4-0062: Failed to register power supply Fixes: b4c7715c10c1 ("power: supply: add CellWise cw2015 fuel gauge driver") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-07-16power: supply: PCHG: Peripheral device chargerDaisuke Nojiri
This patch adds a driver for PCHG (Peripheral CHarGer). PCHG is a framework managing power supplies for peripheral devices. This driver creates a sysfs node for each peripheral charge port: /sys/class/power_supply/peripheral<n> where <n> is the index of a charge port. For example, when a stylus is connected to a NFC/WLC port, the node returns: /sys/class/power_supply/peripheral0/ capacity=50 charge_type=Standard scope=Device status=Charging type=Battery Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-07-16power: supply: ab8500: Drop some includes from bmdataLinus Walleij
This file isn't using any AB8500 symbols so drop these includes. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-07-16power: supply: ab8500: Rename charging algorithm psyLinus Walleij
If we rename the "abx500_chargalg" supply to "ab8500_chargalg" as it should be named, the existing supplies are supplying that supply but that was obviously not working since it had the wrong name. Now that the dependency kicks in we get a bunch of NULL references from ab8500_chargalg_external_power_changed() so check that the workqueue is allocated before we try to queue work on it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-07-16power: supply: ab8500: Drop abx500 conceptLinus Walleij
Drop the entire idea with abx500 being abstract and different from ab8500 in the AB8500 charging drivers. This rids the two identical definitions of a slew of structs in ab8500-bm.h and makes things less confusion and easier to understand. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-07-16power: supply: ab8500: Rename charging algorithm symbolsLinus Walleij
The "abx500" name on the charging algorithm stems from the ambition to produce a series of these analog basebands, re-using the same charging algorithm driver. No ASICs beside AB8500 and AB8505 were ever produced so this terminology is confusing. Rename the algorithm file and symbols to reflect the more narrow scope. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-07-16power: supply: ab8500: Use library interpolationLinus Walleij
The kernel already has a static inline for linear interpolation so use that instead of rolling our own. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-07-16regulator: rtq6752: fix reg reset behaviorChiYuan Huang
Reg will be reset in below two conditions. 1. 'Enable' pin from H to L. 2. Both PAVDD and NAVDD are all disabled. And 'Enable' pin also control i2c communication capability. This patch is to Seperate the if condition in enable/disable callback for reg cache manipulation. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1626407746-23156-1-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-16hwrng: rename 'mod_init' & 'mod_exit' functions to be module-specificRandy Dunlap
Rename module_init & module_exit functions that are named "mod_init" and "mod_exit" so that they are unique in both the System.map file and in initcall_debug output instead of showing up as almost anonymous "mod_init". This is helpful for debugging and in determining how long certain module_init calls take to execute. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Andres Salomon <dilinger@queued.net> Cc: linux-geode@lists.infradead.org Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-07-16crypto: mxs-dcp - Use sg_mapping_iter to copy dataSean Anderson
This uses the sg_pcopy_from_buffer to copy data, instead of doing it ourselves. In addition to reducing code size, this fixes the following oops resulting from failing to kmap the page: [ 68.896381] Unable to handle kernel NULL pointer dereference at virtual address 00000ab8 [ 68.904539] pgd = 3561adb3 [ 68.907475] [00000ab8] *pgd=00000000 [ 68.911153] Internal error: Oops: 805 [#1] ARM [ 68.915618] Modules linked in: cfg80211 rfkill des_generic libdes arc4 libarc4 cbc ecb algif_skcipher sha256_generic libsha256 sha1_generic hmac aes_generic libaes cmac sha512_generic md5 md4 algif_hash af_alg i2c_imx i2c_core ci_hdrc_imx ci_hdrc mxs_dcp ulpi roles udc_core imx_sdma usbmisc_imx usb_common firmware_class virt_dma phy_mxs_usb nf_tables nfnetlink ip_tables x_tables ipv6 autofs4 [ 68.950741] CPU: 0 PID: 139 Comm: mxs_dcp_chan/ae Not tainted 5.10.34 #296 [ 68.958501] Hardware name: Freescale i.MX6 Ultralite (Device Tree) [ 68.964710] PC is at memcpy+0xa8/0x330 [ 68.968479] LR is at 0xd7b2bc9d [ 68.971638] pc : [<c053e7c8>] lr : [<d7b2bc9d>] psr: 000f0013 [ 68.977920] sp : c2cbbee4 ip : 00000010 fp : 00000010 [ 68.983159] r10: 00000000 r9 : c3283a40 r8 : 1a5a6f08 [ 68.988402] r7 : 4bfe0ecc r6 : 76d8a220 r5 : c32f9050 r4 : 00000001 [ 68.994945] r3 : 00000ab8 r2 : fffffff0 r1 : c32f9050 r0 : 00000ab8 [ 69.001492] Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 69.008646] Control: 10c53c7d Table: 83664059 DAC: 00000051 [ 69.014414] Process mxs_dcp_chan/ae (pid: 139, stack limit = 0x667b57ab) [ 69.021133] Stack: (0xc2cbbee4 to 0xc2cbc000) [ 69.025519] bee0: c32f9050 c3235408 00000010 00000010 00000ab8 00000001 bf10406c [ 69.033720] bf00: 00000000 00000000 00000010 00000000 c32355d0 832fb080 00000000 c13de2fc [ 69.041921] bf20: c3628010 00000010 c33d5780 00000ab8 bf1067e8 00000002 c21e5010 c2cba000 [ 69.050125] bf40: c32f8040 00000000 bf106a40 c32f9040 c3283a80 00000001 bf105240 c3234040 [ 69.058327] bf60: ffffe000 c3204100 c2c69800 c2cba000 00000000 bf103b84 00000000 c2eddc54 [ 69.066530] bf80: c3204144 c0140d1c c2cba000 c2c69800 c0140be8 00000000 00000000 00000000 [ 69.074730] bfa0: 00000000 00000000 00000000 c0100114 00000000 00000000 00000000 00000000 [ 69.082932] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 69.091131] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 69.099364] [<c053e7c8>] (memcpy) from [<bf10406c>] (dcp_chan_thread_aes+0x4e8/0x840 [mxs_dcp]) [ 69.108117] [<bf10406c>] (dcp_chan_thread_aes [mxs_dcp]) from [<c0140d1c>] (kthread+0x134/0x160) [ 69.116941] [<c0140d1c>] (kthread) from [<c0100114>] (ret_from_fork+0x14/0x20) [ 69.124178] Exception stack(0xc2cbbfb0 to 0xc2cbbff8) [ 69.129250] bfa0: 00000000 00000000 00000000 00000000 [ 69.137450] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 69.145648] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 69.152289] Code: e320f000 e4803004 e4804004 e4805004 (e4806004) Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-07-16crypto: mxs-dcp - Check for DMA mapping errorsSean Anderson
After calling dma_map_single(), we must also call dma_mapping_error(). This fixes the following warning when compiling with CONFIG_DMA_API_DEBUG: [ 311.241478] WARNING: CPU: 0 PID: 428 at kernel/dma/debug.c:1027 check_unmap+0x79c/0x96c [ 311.249547] DMA-API: mxs-dcp 2280000.crypto: device driver failed to check map error[device address=0x00000000860cb080] [size=32 bytes] [mapped as single] Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-07-16drm/amdgpu: workaround failed COW checks for Thunk VMAsFelix Kuehling
KFD Thunk maps invisible VRAM BOs with PROT_NONE, MAP_PRIVATE. is_cow_mapping returns true for these mappings, which causes mmap to fail in ttm_bo_mmap_obj. As a workaround, clear VM_MAYWRITE for PROT_NONE-COW mappings. This should prevent the mapping from ever becoming writable and makes is_cow_mapping(vm_flags) false. Fixes: f91142c62161 ("drm/ttm: nuke VM_MIXEDMAP on BO mappings v3") Suggested-by: Daniel Vetter <daniel.vetter@intel.com> Tested-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210715190537.585456-1-Felix.Kuehling@amd.com Signed-off-by: Christian König <christian.koenig@amd.com>
2021-07-16Merge tag 'drm-intel-fixes-2021-07-15' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Two regression fixes targeting stable: - Fix -EDEADLK handling regression (Ville) - Drop the page table optimisation (Matt) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YPA8y1DSCp2EbtpC@intel.com
2021-07-16Merge tag 'drm-misc-fixes-2021-07-15' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull (less than what git shortlog provides): * fbdev: Avoid use-after-free by not deleting current video mode * ttm: Avoid NULL-ptr deref in ttm_range_man_fini() * vmwgfx: Fix a merge commit Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YO/yoFO+iSEqnIH0@linux-uq9g
2021-07-15Merge tag 'pwm/for-5.14-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm fixes from Thierry Reding: "A couple of fixes from Uwe that I missed for v5.14-rc1" * tag 'pwm/for-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: ep93xx: Ensure configuring period and duty_cycle isn't wrongly skipped pwm: berlin: Ensure configuring period and duty_cycle isn't wrongly skipped pwm: tiecap: Ensure configuring period and duty_cycle isn't wrongly skipped pwm: spear: Ensure configuring period and duty_cycle isn't wrongly skipped pwm: sprd: Ensure configuring period and duty_cycle isn't wrongly skipped
2021-07-16mtd: cfi_cmdset_0002: fix crash when erasing/writing AMD cardsAndreas Persson
Erasing an AMD linear flash card (AM29F016D) crashes after the first sector has been erased. Likewise, writing to it crashes after two bytes have been written. The reason is a missing check for a null pointer - the cmdset_priv field is not set for this type of card. Fixes: 4844ef80305d ("mtd: cfi_cmdset_0002: Add support for polling status register") Signed-off-by: Andreas Persson <andreasp56@outlook.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/DB6P189MB05830B3530B8087476C5CFE4C1159@DB6P189MB0583.EURP189.PROD.OUTLOOK.COM
2021-07-16mtd: core: handle flashes without OTP gracefullyMichael Walle
There are flash drivers which registers the OTP callbacks although the flash doesn't support OTP regions and return -ENODATA for these callbacks if there is no OTP. If this happens, the probe of the whole flash will fail. Fix it by handling the ENODATA return code and skip the OTP region nvmem setup. Fixes: 4b361cfa8624 ("mtd: core: add OTP nvmem provider support") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Walle <michael@walle.cc> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210707135359.32398-1-michael@walle.cc
2021-07-16mtd: mchp48l640: silence some uninitialized variable warningsDan Carpenter
Smatch complains that zero length read/writes will lead to an uninitalized return value. I don't know if that's possible, but it's nicer to return a zero literal anyway so let's do that. Fixes: 88d125026753 ("mtd: devices: add support for microchip 48l640 EERAM") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/YMyir961W28TX5dT@mwanda
generated by cgit (git 2.34.1) at 2025-10-02 13:12:20 +0000