summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-12-04net: mvpp2: fix phylink handling of invalid PHY modesBaruch Siach
The .validate phylink callback should empty the supported bitmap when the interface mode is invalid. Cc: Maxime Chevallier <maxime.chevallier@bootlin.com> Cc: Antoine Tenart <antoine.tenart@bootlin.com> Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-04net: mvpp2: fix detection of 10G SFP modulesBaruch Siach
The mvpp2_phylink_validate() relies on the interface field of phylink_link_state to determine valid link modes. However, when called from phylink_sfp_module_insert() this field in not initialized. The default switch case then excludes 10G link modes. This allows 10G SFP modules that are detected correctly to be configured at max rate of 2.5G. Catch the uninitialized PHY mode case, and allow 10G rates. Fixes: d97c9f4ab000b ("net: mvpp2: 1000baseX support") Cc: Maxime Chevallier <maxime.chevallier@bootlin.com> Cc: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-04thermal: armada: fix legacy validity test senseRussell King
Commit 8c0e64ac4075 ("thermal: armada: get rid of the ->is_valid() pointer") removed the unnecessary indirection through a function pointer, but in doing so, also removed the negation operator too: - if (priv->data->is_valid && !priv->data->is_valid(priv)) { + if (armada_is_valid(priv)) { which results in: armada_thermal f06f808c.thermal: Temperature sensor reading not valid armada_thermal f2400078.thermal: Temperature sensor reading not valid armada_thermal f4400078.thermal: Temperature sensor reading not valid at boot, or whenever the "temp" sysfs file is read. Replace the negation operator. Fixes: 8c0e64ac4075 ("thermal: armada: get rid of the ->is_valid() pointer") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-04ethernet: fman: fix wrong of_node_put() in probe functionNicolas Saenz Julienne
After getting a reference to the platform device's of_node the probe function ends up calling of_find_matching_node() using the node as an argument. The function takes care of decreasing the refcount on it. We are then incorrectly decreasing the refcount on that node again. This patch removes the unwarranted call to of_node_put(). Fixes: 414fd46e7762 ("fsl/fman: Add FMan support") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-04drm/amd/display: Fix overflow/truncation from strncpy.Nicholas Kazlauskas
[Why] New GCC warnings for stringop-truncation and stringop-overflow help catch common misuse of strncpy. This patch suppresses these warnings by fixing bugs identified by them. [How] Since the parameter passed for name in amdpgu_dm_create_common_mode has no fixed length, if the string is >= DRM_DISPLAY_MODE_LEN then mode->name will not be null-terminated. The truncation in fill_audio_info won't actually occur (and the string will be null-terminated since the buffer is initialized to zero), but the warning can be suppressed by using the proper buffer size. This patch fixes both issues by using the real size for the buffer and making use of strscpy (which always terminates). Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-04drm/amd/powerplay: improve OD code robustnesstianci yin
add protection code to avoid lower frequency trigger over drive. Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Tianci Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-04drm/amdgpu: enlarge maximum waiting time of KIQwentalou
KIQ in VF’s init delayed by another VF’s reset, which would cause late_init failed occasionally. MAX_KIQ_REG_TRY enlarged from 20 to 80 would fix this issue. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Wentao Lou <Wentao.Lou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-04phy: Revert toggling reset changes.David S. Miller
This reverts: ef1b5bf506b1 ("net: phy: Fix not to call phy_resume() if PHY is not attached") 8c85f4b81296 ("net: phy: micrel: add toggling phy reset if PHY is not attached") Andrew Lunn informs me that there are alternative efforts underway to fix this more properly. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Mostly new IDs for Elan/Synaptics touchpads, plus a few small fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: omap-keypad - fix keyboard debounce configuration Input: xpad - quirk all PDP Xbox One gamepads Input: synaptics - enable SMBus for HP 15-ay000 Input: synaptics - add PNP ID for ThinkPad P50 to SMBus Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR Input: elan_i2c - add support for ELAN0621 touchpad Input: hyper-v - fix wakeup from suspend-to-idle Input: atkbd - clean up indentation issue Input: st1232 - convert to SPDX identifiers Input: migor_ts - convert to SPDX identifiers Input: dt-bindings - fix a typo in file input-reset.txt Input: cros_ec_keyb - fix button/switch capability reports Input: elan_i2c - add ELAN0620 to the ACPI table Input: matrix_keypad - check for errors from of_get_named_gpio()
2018-12-04MMC: OMAP: fix broken MMC on OMAP15XX/OMAP5910/OMAP310Aaro Koskinen
Since v2.6.22 or so there has been reports [1] about OMAP MMC being broken on OMAP15XX based hardware (OMAP5910 and OMAP310). The breakage seems to have been caused by commit 46a6730e3ff9 ("mmc-omap: Fix omap to use MMC_POWER_ON") that changed clock enabling to be done on MMC_POWER_ON. This can happen multiple times in a row, and on 15XX the hardware doesn't seem to like it and the MMC just stops responding. Fix by memorizing the power mode and do the init only when necessary. Before the patch (on Palm TE): mmc0: new SD card at address b368 mmcblk0: mmc0:b368 SDC 977 MiB mmci-omap mmci-omap.0: command timeout (CMD18) mmci-omap mmci-omap.0: command timeout (CMD13) mmci-omap mmci-omap.0: command timeout (CMD13) mmci-omap mmci-omap.0: command timeout (CMD12) [x 6] mmci-omap mmci-omap.0: command timeout (CMD13) [x 6] mmcblk0: error -110 requesting status mmci-omap mmci-omap.0: command timeout (CMD8) mmci-omap mmci-omap.0: command timeout (CMD18) mmci-omap mmci-omap.0: command timeout (CMD13) mmci-omap mmci-omap.0: command timeout (CMD13) mmci-omap mmci-omap.0: command timeout (CMD12) [x 6] mmci-omap mmci-omap.0: command timeout (CMD13) [x 6] mmcblk0: error -110 requesting status mmcblk0: recovery failed! print_req_error: I/O error, dev mmcblk0, sector 0 Buffer I/O error on dev mmcblk0, logical block 0, async page read mmcblk0: unable to read partition table After the patch: mmc0: new SD card at address b368 mmcblk0: mmc0:b368 SDC 977 MiB mmcblk0: p1 The patch is based on a fix and analysis done by Ladislav Michl. Tested on OMAP15XX/OMAP310 (Palm TE), OMAP1710 (Nokia 770) and OMAP2420 (Nokia N810). [1] https://marc.info/?t=123175197000003&r=1&w=2 Fixes: 46a6730e3ff9 ("mmc-omap: Fix omap to use MMC_POWER_ON") Reported-by: Ladislav Michl <ladis@linux-mips.org> Reported-by: Andrzej Zaborowski <balrogg@gmail.com> Tested-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-04drm/fb-helper: Fix typo in parameter descriptionWei Yongjun
Fix typo in parameter description. Fixes: 4be9bd10e22d ("drm/fb_helper: Allow leaking fbdev smem_start") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/1543905135-35293-1-git-send-email-weiyongjun1@huawei.com
2018-12-04mmc: core: use mrq->sbc when sending CMD23 for RPMBWolfram Sang
When sending out CMD23 in the blk preparation, the comment there rightfully says: * However, it is not sufficient to just send CMD23, * and avoid the final CMD12, as on an error condition * CMD12 (stop) needs to be sent anyway. This, coupled * with Auto-CMD23 enhancements provided by some * hosts, means that the complexity of dealing * with this is best left to the host. If CMD23 is * supported by card and host, we'll fill sbc in and let * the host deal with handling it correctly. Let's do this behaviour for RPMB as well, and not send CMD23 independently. Otherwise IP cores (like Renesas SDHI) may timeout because of automatic CMD23/CMD12 handling. Reported-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Clément Péron <peron.clem@gmail.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-03net/mlx4_en: Fix build break when CONFIG_INET is offSaeed Mahameed
MLX4_EN depends on NETDEVICES, ETHERNET and INET Kconfigs. Make sure they are listed in MLX4_EN Kconfig dependencies. This fixes the following build break: drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: ‘struct iphdr’ declared inside parameter list [enabled by default] struct iphdr *iph) ^ drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/ethernet/mellanox/mlx4/en_rx.c: In function ‘get_fixed_ipv4_csum’: drivers/net/ethernet/mellanox/mlx4/en_rx.c:586:20: error: dereferencing pointer to incomplete type _u8 ipproto = iph->protocol; Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net/mlx4_en: Change min MTU size to ETH_MIN_MTUEran Ben Elisha
NIC driver minimal MTU size shall be set to ETH_MIN_MTU, as defined in the RFC791 and in the network stack. Remove old mlx4_en only define for it, which was set to wrong value. Fixes: b80f71f5816f ("ethernet/mellanox: use core min/max MTU checking") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03Revert "PCI/ASPM: Do not initialize link state when aspm_disabled is set"Bjorn Helgaas
This reverts commit 17c91487364fb33797ed84022564ee7544ac4945. Rafael found that this commit broke the SD card reader in his Acer Aspire S5. Details of the problem are in the bugzilla below. Fixes: 17c91487364f ("PCI/ASPM: Do not initialize link state when aspm_disabled is set") Link: https://bugzilla.kernel.org/show_bug.cgi?id=201801 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-12-03mv88e6060: disable hardware level MAC learningAnderson Luiz Alves
Disable hardware level MAC learning because it breaks station roaming. When enabled it drops all frames that arrive from a MAC address that is on a different port at learning table. Signed-off-by: Anderson Luiz Alves <alacn1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03macvlan: return correct error valueMatteo Croce
A MAC address must be unique among all the macvlan devices with the same lower device. The only exception is the passthru [sic] mode, which shares the lower device address. When duplicate addresses are detected, EBUSY is returned when bringing the interface up: # ip link add macvlan0 link eth0 type macvlan # read addr </sys/class/net/eth0/address # ip link set macvlan0 address $addr # ip link set macvlan0 up RTNETLINK answers: Device or resource busy Use correct error code which is EADDRINUSE, and do the check also earlier, on address change: # ip link set macvlan0 address $addr RTNETLINK answers: Address already in use Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net/ibmvnic: Fix RTNL deadlock during device resetThomas Falcon
Commit a5681e20b541 ("net/ibmnvic: Fix deadlock problem in reset") made the change to hold the RTNL lock during driver reset but still calls netdev_notify_peers, which results in a deadlock. Instead, use call_netdevice_notifiers, which is functionally the same except that it does not take the RTNL lock again. Fixes: a5681e20b541 ("net/ibmnvic: Fix deadlock problem in reset") Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03vhost: fix IOTLB lockingJean-Philippe Brucker
Commit 78139c94dc8c ("net: vhost: lock the vqs one by one") moved the vq lock to improve scalability, but introduced a possible deadlock in vhost-iotlb. vhost_iotlb_notify_vq() now takes vq->mutex while holding the device's IOTLB spinlock. And on the vhost_iotlb_miss() path, the spinlock is taken while holding vq->mutex. Since calling vhost_poll_queue() doesn't require any lock, avoid the deadlock by not taking vq->mutex. Fixes: 78139c94dc8c ("net: vhost: lock the vqs one by one") Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net: phy: micrel: add toggling phy reset if PHY is not attachedYoshihiro Shimoda
This patch adds toggling phy reset if PHY is not attached. Otherwise, some boards (e.g. R-Car H3 Salvator-XS) cannot link up correctly if we do the following method: 1) Kernel boots by using initramfs. --> No open the nic, so phy_device_register() and phy_probe() deasserts the reset. 2) Kernel enters the suspend. --> So, keep the reset signal as deassert. --> On R-Car Salvator-XS board, unfortunately, the board power is turned off. 3) Kernel returns from suspend. 4) ifconfig eth0 up --> Then, since edge signal of the reset doesn't happen, it cannot link up. 5) ifconfig eth0 down 6) ifconfig eth0 up --> In this case, it can link up. Reported-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net: phy: Fix not to call phy_resume() if PHY is not attachedYoshihiro Shimoda
This patch fixes an issue that mdio_bus_phy_resume() doesn't call phy_resume() if the PHY is not attached. Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03tun: remove skb access after netif_receive_skbPrashant Bhole
In tun.c skb->len was accessed while doing stats accounting after a call to netif_receive_skb. We can not access skb after this call because buffers may be dropped. The fix for this bug would be to store skb->len in local variable and then use it after netif_receive_skb(). IMO using xdp data size for accounting bytes will be better because input for tun_xdp_one() is xdp_buff. Hence this patch: - fixes a bug by removing skb access after netif_receive_skb() - uses xdp data size for accounting bytes [613.019057] BUG: KASAN: use-after-free in tun_sendmsg+0x77c/0xc50 [tun] [613.021062] Read of size 4 at addr ffff8881da9ab7c0 by task vhost-1115/1155 [613.023073] [613.024003] CPU: 0 PID: 1155 Comm: vhost-1115 Not tainted 4.20.0-rc3-vm+ #232 [613.026029] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [613.029116] Call Trace: [613.031145] dump_stack+0x5b/0x90 [613.032219] print_address_description+0x6c/0x23c [613.034156] ? tun_sendmsg+0x77c/0xc50 [tun] [613.036141] kasan_report.cold.5+0x241/0x308 [613.038125] tun_sendmsg+0x77c/0xc50 [tun] [613.040109] ? tun_get_user+0x1960/0x1960 [tun] [613.042094] ? __isolate_free_page+0x270/0x270 [613.045173] vhost_tx_batch.isra.14+0xeb/0x1f0 [vhost_net] [613.047127] ? peek_head_len.part.13+0x90/0x90 [vhost_net] [613.049096] ? get_tx_bufs+0x5a/0x2c0 [vhost_net] [613.051106] ? vhost_enable_notify+0x2d8/0x420 [vhost] [613.053139] handle_tx_copy+0x2d0/0x8f0 [vhost_net] [613.053139] ? vhost_net_buf_peek+0x340/0x340 [vhost_net] [613.053139] ? __mutex_lock+0x8d9/0xb30 [613.053139] ? finish_task_switch+0x8f/0x3f0 [613.053139] ? handle_tx+0x32/0x120 [vhost_net] [613.053139] ? mutex_trylock+0x110/0x110 [613.053139] ? finish_task_switch+0xcf/0x3f0 [613.053139] ? finish_task_switch+0x240/0x3f0 [613.053139] ? __switch_to_asm+0x34/0x70 [613.053139] ? __switch_to_asm+0x40/0x70 [613.053139] ? __schedule+0x506/0xf10 [613.053139] handle_tx+0xc7/0x120 [vhost_net] [613.053139] vhost_worker+0x166/0x200 [vhost] [613.053139] ? vhost_dev_init+0x580/0x580 [vhost] [613.053139] ? __kthread_parkme+0x77/0x90 [613.053139] ? vhost_dev_init+0x580/0x580 [vhost] [613.053139] kthread+0x1b1/0x1d0 [613.053139] ? kthread_park+0xb0/0xb0 [613.053139] ret_from_fork+0x35/0x40 [613.088705] [613.088705] Allocated by task 1155: [613.088705] kasan_kmalloc+0xbf/0xe0 [613.088705] kmem_cache_alloc+0xdc/0x220 [613.088705] __build_skb+0x2a/0x160 [613.088705] build_skb+0x14/0xc0 [613.088705] tun_sendmsg+0x4f0/0xc50 [tun] [613.088705] vhost_tx_batch.isra.14+0xeb/0x1f0 [vhost_net] [613.088705] handle_tx_copy+0x2d0/0x8f0 [vhost_net] [613.088705] handle_tx+0xc7/0x120 [vhost_net] [613.088705] vhost_worker+0x166/0x200 [vhost] [613.088705] kthread+0x1b1/0x1d0 [613.088705] ret_from_fork+0x35/0x40 [613.088705] [613.088705] Freed by task 1155: [613.088705] __kasan_slab_free+0x12e/0x180 [613.088705] kmem_cache_free+0xa0/0x230 [613.088705] ip6_mc_input+0x40f/0x5a0 [613.088705] ipv6_rcv+0xc9/0x1e0 [613.088705] __netif_receive_skb_one_core+0xc1/0x100 [613.088705] netif_receive_skb_internal+0xc4/0x270 [613.088705] br_pass_frame_up+0x2b9/0x2e0 [613.088705] br_handle_frame_finish+0x2fb/0x7a0 [613.088705] br_handle_frame+0x30f/0x6c0 [613.088705] __netif_receive_skb_core+0x61a/0x15b0 [613.088705] __netif_receive_skb_one_core+0x8e/0x100 [613.088705] netif_receive_skb_internal+0xc4/0x270 [613.088705] tun_sendmsg+0x738/0xc50 [tun] [613.088705] vhost_tx_batch.isra.14+0xeb/0x1f0 [vhost_net] [613.088705] handle_tx_copy+0x2d0/0x8f0 [vhost_net] [613.088705] handle_tx+0xc7/0x120 [vhost_net] [613.088705] vhost_worker+0x166/0x200 [vhost] [613.088705] kthread+0x1b1/0x1d0 [613.088705] ret_from_fork+0x35/0x40 [613.088705] [613.088705] The buggy address belongs to the object at ffff8881da9ab740 [613.088705] which belongs to the cache skbuff_head_cache of size 232 Fixes: 043d222f93ab ("tuntap: accept an array of XDP buffs through sendmsg()") Reviewed-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net: 8139cp: fix a BUG triggered by changing mtu with network trafficSu Yanjun
When changing mtu many times with traffic, a bug is triggered: [ 1035.684037] kernel BUG at lib/dynamic_queue_limits.c:26! [ 1035.684042] invalid opcode: 0000 [#1] SMP [ 1035.684049] Modules linked in: loop binfmt_misc 8139cp(OE) macsec tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag tcp_lp fuse uinput xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter devlink ip6_tables iptable_filter sunrpc snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep ppdev snd_seq iosf_mbi crc32_pclmul parport_pc snd_seq_device ghash_clmulni_intel parport snd_pcm aesni_intel joydev lrw snd_timer virtio_balloon sg gf128mul glue_helper ablk_helper cryptd snd soundcore i2c_piix4 pcspkr ip_tables xfs libcrc32c sr_mod sd_mod cdrom crc_t10dif crct10dif_generic ata_generic [ 1035.684102] pata_acpi virtio_console qxl drm_kms_helper syscopyarea sysfillrect sysimgblt floppy fb_sys_fops crct10dif_pclmul crct10dif_common ttm crc32c_intel serio_raw ata_piix drm libata 8139too virtio_pci drm_panel_orientation_quirks virtio_ring virtio mii dm_mirror dm_region_hash dm_log dm_mod [last unloaded: 8139cp] [ 1035.684132] CPU: 9 PID: 25140 Comm: if-mtu-change Kdump: loaded Tainted: G OE ------------ T 3.10.0-957.el7.x86_64 #1 [ 1035.684134] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 1035.684136] task: ffff8f59b1f5a080 ti: ffff8f5a2e32c000 task.ti: ffff8f5a2e32c000 [ 1035.684149] RIP: 0010:[<ffffffffba3a40d0>] [<ffffffffba3a40d0>] dql_completed+0x180/0x190 [ 1035.684162] RSP: 0000:ffff8f5a75483e50 EFLAGS: 00010093 [ 1035.684162] RAX: 00000000000000c2 RBX: ffff8f5a6f91c000 RCX: 0000000000000000 [ 1035.684162] RDX: 0000000000000000 RSI: 0000000000000184 RDI: ffff8f599fea3ec0 [ 1035.684162] RBP: ffff8f5a75483ea8 R08: 00000000000000c2 R09: 0000000000000000 [ 1035.684162] R10: 00000000000616ef R11: ffff8f5a75483b56 R12: ffff8f599fea3e00 [ 1035.684162] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000184 [ 1035.684162] FS: 00007fa8434de740(0000) GS:ffff8f5a75480000(0000) knlGS:0000000000000000 [ 1035.684162] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1035.684162] CR2: 00000000004305d0 CR3: 000000024eb66000 CR4: 00000000001406e0 [ 1035.684162] Call Trace: [ 1035.684162] <IRQ> [ 1035.684162] [<ffffffffc08cbaf8>] ? cp_interrupt+0x478/0x580 [8139cp] [ 1035.684162] [<ffffffffba14a294>] __handle_irq_event_percpu+0x44/0x1c0 [ 1035.684162] [<ffffffffba14a442>] handle_irq_event_percpu+0x32/0x80 [ 1035.684162] [<ffffffffba14a4cc>] handle_irq_event+0x3c/0x60 [ 1035.684162] [<ffffffffba14db29>] handle_fasteoi_irq+0x59/0x110 [ 1035.684162] [<ffffffffba02e554>] handle_irq+0xe4/0x1a0 [ 1035.684162] [<ffffffffba7795dd>] do_IRQ+0x4d/0xf0 [ 1035.684162] [<ffffffffba76b362>] common_interrupt+0x162/0x162 [ 1035.684162] <EOI> [ 1035.684162] [<ffffffffba0c2ae4>] ? __wake_up_bit+0x24/0x70 [ 1035.684162] [<ffffffffba1e46f5>] ? do_set_pte+0xd5/0x120 [ 1035.684162] [<ffffffffba1b64fb>] unlock_page+0x2b/0x30 [ 1035.684162] [<ffffffffba1e4879>] do_read_fault.isra.61+0x139/0x1b0 [ 1035.684162] [<ffffffffba1e9134>] handle_pte_fault+0x2f4/0xd10 [ 1035.684162] [<ffffffffba1ebc6d>] handle_mm_fault+0x39d/0x9b0 [ 1035.684162] [<ffffffffba76f5e3>] __do_page_fault+0x203/0x500 [ 1035.684162] [<ffffffffba76f9c6>] trace_do_page_fault+0x56/0x150 [ 1035.684162] [<ffffffffba76ef42>] do_async_page_fault+0x22/0xf0 [ 1035.684162] [<ffffffffba76b788>] async_page_fault+0x28/0x30 [ 1035.684162] Code: 54 c7 47 54 ff ff ff ff 44 0f 49 ce 48 8b 35 48 2f 9c 00 48 89 77 58 e9 fe fe ff ff 0f 1f 80 00 00 00 00 41 89 d1 e9 ef fe ff ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 55 8d 42 ff 48 [ 1035.684162] RIP [<ffffffffba3a40d0>] dql_completed+0x180/0x190 [ 1035.684162] RSP <ffff8f5a75483e50> It's not the same as in 7fe0ee09 patch described. As 8139cp uses shared irq mode, other device irq will trigger cp_interrupt to execute. cp_change_mtu -> cp_close -> cp_open In cp_close routine just before free_irq(), some interrupt may occur. In my environment, cp_interrupt exectutes and IntrStatus is 0x4, exactly TxOk. That will cause cp_tx to wake device queue. As device queue is started, cp_start_xmit and cp_open will run at same time which will cause kernel BUG. For example: [#] for tx descriptor At start: [#][#][#] num_queued=3 After cp_init_hw->cp_start_hw->netdev_reset_queue: [#][#][#] num_queued=0 When 8139cp starts to work then cp_tx will check num_queued mismatchs the complete_bytes. The patch will check IntrMask before check IntrStatus in cp_interrupt. When 8139cp interrupt is disabled, just return. Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03IB/mlx5: Fix implicit ODP interrupted page faultArtemy Kovalyov
Since any page fault may be interrupted by a MMU invalidation and implicit leaf MR may be released during this process. The check for parent value is unreliable condition for an implicit MR. Use other condition that we can rely on to determine if MR is implicit. Fixes: b4cfe447d47b ("IB/mlx5: Implement on demand paging by adding support for MMU notifiers") Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-12-03net: phy: don't allow __set_phy_supported to add unsupported modesHeiner Kallweit
Currently __set_phy_supported allows to add modes w/o checking whether the PHY supports them. This is wrong, it should never add modes but only remove modes we don't want to support. The commit marked as fixed didn't do anything wrong, it just copied existing functionality to the helper which is being fixed now. Fixes: f3a6bd393c2c ("phylib: Add phy_set_max_speed helper") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03IB/hfi1: Fix an out-of-bounds access in get_hw_statsPiotr Stankiewicz
When running with KASAN, the following trace is produced: [ 62.535888] ================================================================== [ 62.544930] BUG: KASAN: slab-out-of-bounds in gut_hw_stats+0x122/0x230 [hfi1] [ 62.553856] Write of size 8 at addr ffff88080e8d6330 by task kworker/0:1/14 [ 62.565333] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 4.19.0-test-build-kasan+ #8 [ 62.575087] Hardware name: Intel Corporation S2600KPR/S2600KPR, BIOS SE5C610.86B.01.01.0019.101220160604 10/12/2016 [ 62.587951] Workqueue: events work_for_cpu_fn [ 62.594050] Call Trace: [ 62.598023] dump_stack+0xc6/0x14c [ 62.603089] ? dump_stack_print_info.cold.1+0x2f/0x2f [ 62.610041] ? kmsg_dump_rewind_nolock+0x59/0x59 [ 62.616615] ? get_hw_stats+0x122/0x230 [hfi1] [ 62.622985] print_address_description+0x6c/0x23c [ 62.629744] ? get_hw_stats+0x122/0x230 [hfi1] [ 62.636108] kasan_report.cold.6+0x241/0x308 [ 62.642365] get_hw_stats+0x122/0x230 [hfi1] [ 62.648703] ? hfi1_alloc_rn+0x40/0x40 [hfi1] [ 62.655088] ? __kmalloc+0x110/0x240 [ 62.660695] ? hfi1_alloc_rn+0x40/0x40 [hfi1] [ 62.667142] setup_hw_stats+0xd8/0x430 [ib_core] [ 62.673972] ? show_hfi+0x50/0x50 [hfi1] [ 62.680026] ib_device_register_sysfs+0x165/0x180 [ib_core] [ 62.687995] ib_register_device+0x5a2/0xa10 [ib_core] [ 62.695340] ? show_hfi+0x50/0x50 [hfi1] [ 62.701421] ? ib_unregister_device+0x2e0/0x2e0 [ib_core] [ 62.709222] ? __vmalloc_node_range+0x2d0/0x380 [ 62.716131] ? rvt_driver_mr_init+0x11f/0x2d0 [rdmavt] [ 62.723735] ? vmalloc_node+0x5c/0x70 [ 62.729697] ? rvt_driver_mr_init+0x11f/0x2d0 [rdmavt] [ 62.737347] ? rvt_driver_mr_init+0x1f5/0x2d0 [rdmavt] [ 62.744998] ? __rvt_alloc_mr+0x110/0x110 [rdmavt] [ 62.752315] ? rvt_rc_error+0x140/0x140 [rdmavt] [ 62.759434] ? rvt_vma_open+0x30/0x30 [rdmavt] [ 62.766364] ? mutex_unlock+0x1d/0x40 [ 62.772445] ? kmem_cache_create_usercopy+0x15d/0x230 [ 62.780115] rvt_register_device+0x1f6/0x360 [rdmavt] [ 62.787823] ? rvt_get_port_immutable+0x180/0x180 [rdmavt] [ 62.796058] ? __get_txreq+0x400/0x400 [hfi1] [ 62.802969] ? memcpy+0x34/0x50 [ 62.808611] hfi1_register_ib_device+0xde6/0xeb0 [hfi1] [ 62.816601] ? hfi1_get_npkeys+0x10/0x10 [hfi1] [ 62.823760] ? hfi1_init+0x89f/0x9a0 [hfi1] [ 62.830469] ? hfi1_setup_eagerbufs+0xad0/0xad0 [hfi1] [ 62.838204] ? pcie_capability_clear_and_set_word+0xcd/0xe0 [ 62.846429] ? pcie_capability_read_word+0xd0/0xd0 [ 62.853791] ? hfi1_pcie_init+0x187/0x4b0 [hfi1] [ 62.860958] init_one+0x67f/0xae0 [hfi1] [ 62.867301] ? hfi1_init+0x9a0/0x9a0 [hfi1] [ 62.873876] ? wait_woken+0x130/0x130 [ 62.879860] ? read_word_at_a_time+0xe/0x20 [ 62.886329] ? strscpy+0x14b/0x280 [ 62.891998] ? hfi1_init+0x9a0/0x9a0 [hfi1] [ 62.898405] local_pci_probe+0x70/0xd0 [ 62.904295] ? pci_device_shutdown+0x90/0x90 [ 62.910833] work_for_cpu_fn+0x29/0x40 [ 62.916750] process_one_work+0x584/0x960 [ 62.922974] ? rcu_work_rcufn+0x40/0x40 [ 62.928991] ? __schedule+0x396/0xdc0 [ 62.934806] ? __sched_text_start+0x8/0x8 [ 62.941020] ? pick_next_task_fair+0x68b/0xc60 [ 62.947674] ? run_rebalance_domains+0x260/0x260 [ 62.954471] ? __list_add_valid+0x29/0xa0 [ 62.960607] ? move_linked_works+0x1c7/0x230 [ 62.967077] ? trace_event_raw_event_workqueue_execute_start+0x140/0x140 [ 62.976248] ? mutex_lock+0xa6/0x100 [ 62.982029] ? __mutex_lock_slowpath+0x10/0x10 [ 62.988795] ? __switch_to+0x37a/0x710 [ 62.994731] worker_thread+0x62e/0x9d0 [ 63.000602] ? max_active_store+0xf0/0xf0 [ 63.006828] ? __switch_to_asm+0x40/0x70 [ 63.012932] ? __switch_to_asm+0x34/0x70 [ 63.019013] ? __switch_to_asm+0x40/0x70 [ 63.025042] ? __switch_to_asm+0x34/0x70 [ 63.031030] ? __switch_to_asm+0x40/0x70 [ 63.037006] ? __schedule+0x396/0xdc0 [ 63.042660] ? kmem_cache_alloc_trace+0xf3/0x1f0 [ 63.049323] ? kthread+0x59/0x1d0 [ 63.054594] ? ret_from_fork+0x35/0x40 [ 63.060257] ? __sched_text_start+0x8/0x8 [ 63.066212] ? schedule+0xcf/0x250 [ 63.071529] ? __wake_up_common+0x110/0x350 [ 63.077794] ? __schedule+0xdc0/0xdc0 [ 63.083348] ? wait_woken+0x130/0x130 [ 63.088963] ? finish_task_switch+0x1f1/0x520 [ 63.095258] ? kasan_unpoison_shadow+0x30/0x40 [ 63.101792] ? __init_waitqueue_head+0xa0/0xd0 [ 63.108183] ? replenish_dl_entity.cold.60+0x18/0x18 [ 63.115151] ? _raw_spin_lock_irqsave+0x25/0x50 [ 63.121754] ? max_active_store+0xf0/0xf0 [ 63.127753] kthread+0x1ae/0x1d0 [ 63.132894] ? kthread_bind+0x30/0x30 [ 63.138422] ret_from_fork+0x35/0x40 [ 63.146973] Allocated by task 14: [ 63.152077] kasan_kmalloc+0xbf/0xe0 [ 63.157471] __kmalloc+0x110/0x240 [ 63.162804] init_cntrs+0x34d/0xdf0 [hfi1] [ 63.168883] hfi1_init_dd+0x29a3/0x2f90 [hfi1] [ 63.175244] init_one+0x551/0xae0 [hfi1] [ 63.181065] local_pci_probe+0x70/0xd0 [ 63.186759] work_for_cpu_fn+0x29/0x40 [ 63.192310] process_one_work+0x584/0x960 [ 63.198163] worker_thread+0x62e/0x9d0 [ 63.203843] kthread+0x1ae/0x1d0 [ 63.208874] ret_from_fork+0x35/0x40 [ 63.217203] Freed by task 1: [ 63.221844] __kasan_slab_free+0x12e/0x180 [ 63.227844] kfree+0x92/0x1a0 [ 63.232570] single_release+0x3a/0x60 [ 63.238024] __fput+0x1d9/0x480 [ 63.242911] task_work_run+0x139/0x190 [ 63.248440] exit_to_usermode_loop+0x191/0x1a0 [ 63.254814] do_syscall_64+0x301/0x330 [ 63.260283] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 63.270199] The buggy address belongs to the object at ffff88080e8d5500 which belongs to the cache kmalloc-4096 of size 4096 [ 63.287247] The buggy address is located 3632 bytes inside of 4096-byte region [ffff88080e8d5500, ffff88080e8d6500) [ 63.303564] The buggy address belongs to the page: [ 63.310447] page:ffffea00203a3400 count:1 mapcount:0 mapping:ffff88081380e840 index:0x0 compound_mapcount: 0 [ 63.323102] flags: 0x2fffff80008100(slab|head) [ 63.329775] raw: 002fffff80008100 0000000000000000 0000000100000001 ffff88081380e840 [ 63.340175] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000 [ 63.350564] page dumped because: kasan: bad access detected [ 63.361974] Memory state around the buggy address: [ 63.369137] ffff88080e8d6200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 63.379082] ffff88080e8d6280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 63.389032] >ffff88080e8d6300: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc [ 63.398944] ^ [ 63.406141] ffff88080e8d6380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 63.416109] ffff88080e8d6400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 63.426099] ================================================================== The trace happens because get_hw_stats() assumes there is room in the memory allocated in init_cntrs() to accommodate the driver counters. Unfortunately, that routine only allocated space for the device counters. Fix by insuring the allocation has room for the additional driver counters. Cc: <Stable@vger.kernel.org> # v4.14+ Fixes: b7481944b06e9 ("IB/hfi1: Show statistics counters under IB stats interface") Reviewed-by: Mike Marciniczyn <mike.marciniszyn@intel.com> Reviewed-by: Mike Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Piotr Stankiewicz <piotr.stankiewicz@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-12-03IB/hfi1: Fix a latency issue for small messagesMichael J. Ruhl
A recent performance enhancement introduced a latency issue in the HFI message path. The new algorithm removed a forced call send for PIO messages and added a forced schedule event for messages larger than the MTU. For PIO, the schedule path can introduce thrashing that can significantly impact the throughput for small messages. If a message size is within the PIO threshold, always take the send path. Fixes: 0b79b27748cb ("IB/{hfi1, qib, rdmavt}: Schedule multi RC/UC packets instead of posting") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-12-03media: vicodec: set state resolution from raw formatHans Verkuil
The state structure contains the resolution expected by the decoder and encoder. For an encoder that resolution should be taken from the OUTPUT format, and for a decoder from the CAPTURE format. If the wrong format is picked, a buffer overrun can occur if there is a mismatch between the CAPTURE and OUTPUT formats. The real fix would be to correctly implement the stateful codec specification, but that will take more time. For now just prevent the buffer overrun. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-03media: vivid: drop v4l2_ctrl_request_complete() from start_streamingHans Verkuil
If start_streaming() fails and all queued buffers are returned to vb2, then do not call v4l2_ctrl_request_complete(). Nothing happened to the request and the state should remain as it was before start_streaming was called. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-03media: vb2: don't unbind/put the object when going to state QUEUEDHans Verkuil
When a buffer is returned to state QUEUED (that happens when start_streaming fails), then do not unbind and put the object from the request. Nothing has changed yet, so just keep it as is. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-03media: vb2: keep a reference to the request until dqbufHans Verkuil
When vb2_buffer_done is called the buffer is unbound from the request and put. The media_request_object_put also 'put's the request reference. If the application has already closed the request fd, then that means that the request reference at that point goes to 0 and the whole request is released. This means that the control handler associated with the request is also freed and that causes this kernel oops: [174705.995401] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [174705.995411] in_atomic(): 1, irqs_disabled(): 1, pid: 28071, name: vivid-000-vid-o [174705.995416] 2 locks held by vivid-000-vid-o/28071: [174705.995420] #0: 000000001ea3a232 (&dev->mutex#3){....}, at: vivid_thread_vid_out+0x3f5/0x550 [vivid] [174705.995447] #1: 00000000e30a0d1e (&(&q->done_lock)->rlock){....}, at: vb2_buffer_done+0x92/0x1d0 [videobuf2_common] [174705.995460] Preemption disabled at: [174705.995461] [<0000000000000000>] (null) [174705.995472] CPU: 11 PID: 28071 Comm: vivid-000-vid-o Tainted: G W 4.20.0-rc1-test-no #88 [174705.995476] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 [174705.995481] Call Trace: [174705.995500] dump_stack+0x46/0x60 [174705.995512] ___might_sleep.cold.79+0xe1/0xf1 [174705.995523] __mutex_lock+0x50/0x8f0 [174705.995531] ? find_held_lock+0x2d/0x90 [174705.995536] ? find_held_lock+0x2d/0x90 [174705.995542] ? find_held_lock+0x2d/0x90 [174705.995564] ? v4l2_ctrl_handler_free.part.13+0x44/0x1d0 [videodev] [174705.995576] v4l2_ctrl_handler_free.part.13+0x44/0x1d0 [videodev] [174705.995590] v4l2_ctrl_request_release+0x1c/0x30 [videodev] [174705.995600] media_request_clean+0x64/0xe0 [media] [174705.995609] media_request_release+0x19/0x40 [media] [174705.995617] vb2_buffer_done+0xef/0x1d0 [videobuf2_common] [174705.995630] vivid_thread_vid_out+0x2c1/0x550 [vivid] [174705.995645] ? vivid_stop_generating_vid_cap+0x1c0/0x1c0 [vivid] [174705.995653] kthread+0x113/0x130 [174705.995659] ? kthread_park+0x80/0x80 [174705.995667] ret_from_fork+0x35/0x40 The vb2_buffer_done function can be called from interrupt context, so anything that sleeps is not allowed. The solution is to increment the request refcount when the buffer is queued and decrement it when the buffer is dequeued. Releasing the request is fine if that happens from VIDIOC_DQBUF. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-03media: vb2: skip request checks for VIDIOC_PREPARE_BUFHans Verkuil
VIDIOC_PREPARE_BUF should ignore V4L2_BUF_FLAG_REQUEST_FD since it isn't doing anything with requests. So inform vb2_queue_or_prepare_buf whether it is called from vb2_prepare_buf or vb2_qbuf and just return 0 in the first case. This was found when adding new v4l2-compliance checks. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-03media: vb2: don't call __vb2_queue_cancel if vb2_start_streaming failedHans Verkuil
vb2_start_streaming() already rolls back the buffers, so there is no need to call __vb2_queue_cancel(). Especially since __vb2_queue_cancel() does too much, such as zeroing the q->queued_count value, causing vb2 to think that no buffers have been queued. It appears that this call to __vb2_queue_cancel() is a left-over from before commit b3379c6201bb3. Fixes: b3379c6201bb3 ('vb2: only call start_streaming if sufficient buffers are queued') Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: <stable@vger.kernel.org> # for v4.16 and up Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-03media: cedrus: Fix a NULL vs IS_ERR() checkDan Carpenter
The devm_ioremap_resource() function doesn't return NULL pointers, it returns error pointers. Fixes: 50e761516f2b ("media: platform: Add Cedrus VPU decoder driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-03media: vsp1: Fix LIF buffer thresholdsLaurent Pinchart
Commit de2bc45c84f7 ("media: vsp1: Update LIF buffer thresholds") updated the LIF buffer thresholds based on the VSP version, but used the wrong model mask. This resulted in all VSP instances to be treated as a Gen3 VSPD, breaking operation on all Gen2 platforms as well as on H3 ES2.0, M3-N, V3M and V3H. Fix it. Fixes: de2bc45c84f7 ("media: vsp1: Update LIF buffer thresholds") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-03libata: whitelist all SAMSUNG MZ7KM* solid-state disksJuha-Matti Tilli
These devices support read zero after trim (RZAT), as they advertise to the OS. However, the OS doesn't believe the SSDs unless they are explicitly whitelisted. Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Juha-Matti Tilli <juha-matti.tilli@iki.fi> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-03Input: omap-keypad - fix keyboard debounce configurationTony Lindgren
I noticed that the Android v3.0.8 kernel on droid4 is using different keypad values from the mainline kernel and does not have issues with keys occasionally being stuck until pressed again. Turns out there was an earlier patch posted to fix this as "Input: omap-keypad: errata i689: Correct debounce time", but it was never reposted to fix use macros for timing calculations. This updated version is using macros, and also fixes the use of the input clock rate to use 32768KiHz instead of 32000KiHz. And we want to use the known good Android kernel values of 3 and 6 instead of 2 and 6 in the earlier patch. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: xpad - quirk all PDP Xbox One gamepadsCameron Gutman
Since we continue to find tons of new variants [0,1,2,3,4,5,6] that need the PDP quirk, let's just quirk all devices from PDP. [0]: https://github.com/paroj/xpad/pull/104 [1]: https://github.com/paroj/xpad/pull/105 [2]: https://github.com/paroj/xpad/pull/108 [3]: https://github.com/paroj/xpad/pull/109 [4]: https://github.com/paroj/xpad/pull/112 [5]: https://github.com/paroj/xpad/pull/115 [6]: https://github.com/paroj/xpad/pull/116 Fixes: e5c9c6a885fa ("Input: xpad - add support for PDP Xbox One controllers") Cc: stable@vger.kernel.org Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: synaptics - enable SMBus for HP 15-ay000Teika Kazura
SMBus works fine for the touchpad with id SYN3221, used in the HP 15-ay000 series, This device has been reported in these messages in the "linux-input" mailing list: * https://marc.info/?l=linux-input&m=152016683003369&w=2 * https://www.spinics.net/lists/linux-input/msg52525.html Reported-by: Nitesh Debnath <niteshkd1999@gmail.com> Reported-by: Teika Kazura <teika@gmx.com> Signed-off-by: Teika Kazura <teika@gmx.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: synaptics - add PNP ID for ThinkPad P50 to SMBusLyude Paul
Noticed the other day the trackpoint felt different on my P50, then realized it was because rmi4 wasn't loading for this machine automatically. Suspend/resume, hibernate, and everything else seem to work perfectly fine on here. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARRNoah Westervelt
Add ELAN061E to the ACPI table to support Elan touchpad found in Lenovo IdeaPad 330-15ARR. Signed-off-by: Noah Westervelt <nwestervelt@outlook.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: elan_i2c - add support for ELAN0621 touchpadAdam Wong
Added the ability to detect the ELAN0621 touchpad found in some Lenovo laptops. Signed-off-by: Adam Wong <adam@adamwong.me> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Input: olpc_apsp - remove set but not used variable 'np'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/input/serio/olpc_apsp.c: In function 'olpc_apsp_probe': drivers/input/serio/olpc_apsp.c:192:22: warning: variable 'np' set but not used [-Wunused-but-set-variable] It never used since introduction in commit b56ece9a3ac3 ("Input: add OLPC AP-SP driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-12-03Merge tag 'media/v4.20-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - Revert a dt-bindings patch whose driver didn't make for 4.20 - fix a kernel oops at vicodec driver - fix a frame overflow at gspca with was causing regressions on some cameras, making them to not work - use the proper type for wait_queue head - make media request API compatible with 32-bit userspace on 64-bit kernel - fix a regression on Kernel 4.19 at dvb-pll - don't use SPDX headers yet for GFDL * tag 'media/v4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: mediactl docs: Fix licensing message media: dvb-pll: don't re-validate tuner frequencies media: dvb-pll: fix tuner frequency ranges media: Revert "media: dt-bindings: Document the Rockchip VPU bindings" media: gspca: fix frame overflow error media: vicodec: fix memchr() kernel oops media: cedrus: add action item to the TODO media: media-request: Add compat ioctl media: Use wait_queue_head_t for media_request
2018-12-03clk: zynqmp: Off by one in zynqmp_is_valid_clock()Dan Carpenter
The > comparison should be >= to prevent reading beyond the end of the clock[] array. (The clock[] array is allocated in zynqmp_clk_setup() and has clock_max_idx elements.) Fixes: 3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-03clk: mmp: Off by one in mmp_clk_add()Dan Carpenter
The > comparison should be >= or we write one element beyond the end of the unit->clk_table[] array. (The unit->clk_table[] array is allocated in the mmp_clk_init() function and it has unit->nr_clks elements). Fixes: 4661fda10f8b ("clk: mmp: add basic support functions for DT support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-03clk: mvebu: Off by one bugs in cp110_of_clk_get()Dan Carpenter
These > comparisons should be >= to prevent reading beyond the end of of the clk_data->hws[] buffer. The clk_data->hws[] array is allocated in cp110_syscon_common_probe() when we do: cp110_clk_data = devm_kzalloc(dev, sizeof(*cp110_clk_data) + sizeof(struct clk_hw *) * CP110_CLK_NUM, GFP_KERNEL); As you can see, it has CP110_CLK_NUM elements which is equivalent to CP110_MAX_CORE_CLOCKS + CP110_MAX_GATABLE_CLOCKS. Fixes: d3da3eaef7f4 ("clk: mvebu: new driver for Armada CP110 system controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ideLinus Torvalds
Pull IDE fixes from David Miller: "A missing of_node_put() and a small cleanup" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: Change to use DEFINE_SHOW_ATTRIBUTE macro ide: pmac: add of_node_put()
2018-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: 1) Some implicit switch fallthrough fixes from Stephen Rothwell. 2) Missing of_node_put() in various sparc drivers from Yangtao Li. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: drivers/tty: add missing of_node_put() drivers/sbus/char: add of_node_put() sbus: char: add of_node_put() sparc32: supress another implicit-fallthrough warning sparc32: suppress an implicit-fallthrough warning sparc: suppress the implicit-fallthrough warning arch/sparc: Use kzalloc_node
2018-12-03drm/amd/powerplay: support SoftMin/Max setting for some specific DPMEvan Quan
For some case, no need to force SoftMin/Max settings for all DPMs. It's OK to force on some specific DPM only. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-13 00:21:40 +0000