summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-10-14net: lan743x: Remove duplicate checkJinjie Ruan
Since timespec64_valid() has been checked in higher layer pc_clock_settime(), the duplicate check in lan743x_ptpci_settime64() can be removed. Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://patch.msgid.link/20241009072302.1754567-3-ruanjinjie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-14firmware: arm_scmi: Queue in scmi layer for mailbox implementationJustin Chen
send_message() does not block in the MBOX implementation. This is because the mailbox layer has its own queue. However, this confuses the per xfer timeouts as they all start their timeout ticks in parallel. Consider a case where the xfer timeout is 30ms and a SCMI transaction takes 25ms: | 0ms: Message #0 is queued in mailbox layer and sent out, then sits | at scmi_wait_for_message_response() with a timeout of 30ms | 1ms: Message #1 is queued in mailbox layer but not sent out yet. | Since send_message() doesn't block, it also sits at | scmi_wait_for_message_response() with a timeout of 30ms | ... | 25ms: Message #0 is completed, txdone is called and message #1 is sent | 31ms: Message #1 times out since the count started at 1ms. Even though | it has only been inflight for 6ms. Fixes: 5c8a47a5a91d ("firmware: arm_scmi: Make scmi core independent of the transport type") Signed-off-by: Justin Chen <justin.chen@broadcom.com> Message-Id: <20241014160717.1678953-1-justin.chen@broadcom.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Tested-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-10-14drm/msm: Allocate memory for disp snapshot with kvzalloc()Douglas Anderson
With the "drm/msm: add a display mmu fault handler" series [1] we saw issues in the field where memory allocation was failing when allocating space for registers in msm_disp_state_dump_regs(). Specifically we were seeing an order 5 allocation fail. It's not surprising that order 5 allocations will sometimes fail after the system has been up and running for a while. There's no need here for contiguous memory. Change the allocation to kvzalloc() which should make it much less likely to fail. [1] https://lore.kernel.org/r/20240628214848.4075651-1-quic_abhinavk@quicinc.com/ Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/619658/ Link: https://lore.kernel.org/r/20241014093605.2.I72441365ffe91f3dceb17db0a8ec976af8139590@changeid Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-10-14drm/msm: Avoid NULL dereference in msm_disp_state_print_regs()Douglas Anderson
If the allocation in msm_disp_state_dump_regs() failed then `block->state` can be NULL. The msm_disp_state_print_regs() function _does_ have code to try to handle it with: if (*reg) dump_addr = *reg; ...but since "dump_addr" is initialized to NULL the above is actually a noop. The code then goes on to dereference `dump_addr`. Make the function print "Registers not stored" when it sees a NULL to solve this. Since we're touching the code, fix msm_disp_state_print_regs() not to pointlessly take a double-pointer and properly mark the pointer as `const`. Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/619657/ Link: https://lore.kernel.org/r/20241014093605.1.Ia1217cecec9ef09eb3c6d125360cc6c8574b0e73@changeid Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-10-14drm/msm/dsi: fix 32-bit signed integer extension in pclk_rate calculationJonathan Marek
When (mode->clock * 1000) is larger than (1<<31), int to unsigned long conversion will sign extend the int to 64 bits and the pclk_rate value will be incorrect. Fix this by making the result of the multiplication unsigned. Note that above (1<<32) would still be broken and require more changes, but its unlikely anyone will need that anytime soon. Fixes: c4d8cfe516dc ("drm/msm/dsi: add implementation for helper functions") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/618434/ Link: https://lore.kernel.org/r/20241007050157.26855-2-jonathan@marek.ca Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-10-14drm/msm/dsi: improve/fix dsc pclk calculationJonathan Marek
drm_mode_vrefresh() can introduce a large rounding error, avoid it. Fixes: 7c9e4a554d4a ("drm/msm/dsi: Reduce pclk rate for compression") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/618432/ Link: https://lore.kernel.org/r/20241007050157.26855-1-jonathan@marek.ca Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-10-14drm/msm/hdmi: drop pll_cmp_to_fdata from hdmi_phy_8998Dmitry Baryshkov
The pll_cmp_to_fdata() was never used by the working code. Drop it to prevent warnings with W=1 and clang. Reported-by: Jani Nikula <jani.nikula@intel.com> Closes: https://lore.kernel.org/dri-devel/3553b1db35665e6ff08592e35eb438a574d1ad65.1725962479.git.jani.nikula@intel.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Fixes: caedbf17c48d ("drm/msm: add msm8998 hdmi phy/pll support") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/615348/ Link: https://lore.kernel.org/r/20240922-msm-drop-unused-func-v1-1-c5dc083415b8@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-10-14drm/msm/dpu: check for overflow in _dpu_crtc_setup_lm_bounds()Dmitry Baryshkov
Make _dpu_crtc_setup_lm_bounds() check that CRTC width is not overflowing LM requirements. Rename the function accordingly. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/612237/ Link: https://lore.kernel.org/r/20240903-dpu-mode-config-width-v6-3-617e1ecc4b7a@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-10-14drm/msm/dpu: move CRTC resource assignment to dpu_encoder_virt_atomic_checkDmitry Baryshkov
Historically CRTC resources (LMs and CTLs) were assigned in dpu_crtc_atomic_begin(). The commit 9222cdd27e82 ("drm/msm/dpu: move hw resource tracking to crtc state") simply moved resources to struct dpu_crtc_state, without changing the code sequence. Later on the commit b107603b4ad0 ("drm/msm/dpu: map mixer/ctl hw blocks in encoder modeset") rearanged the code, but still kept the cstate->num_mixers assignment to happen during commit phase. This makes dpu_crtc_state inconsistent between consequent atomic_check() calls. Move CRTC resource assignment to happen at the end of dpu_encoder_virt_atomic_check(). Fixes: b107603b4ad0 ("drm/msm/dpu: map mixer/ctl hw blocks in encoder modeset") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/612235/ Link: https://lore.kernel.org/r/20240903-dpu-mode-config-width-v6-2-617e1ecc4b7a@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-10-14drm/msm/dpu: make sure phys resources are properly initializedDmitry Baryshkov
The commit b954fa6baaca ("drm/msm/dpu: Refactor rm iterator") removed zero-init of the hw_ctl array, but didn't change the error condition, that checked for hw_ctl[i] being NULL. At the same time because of the early returns in case of an error dpu_encoder_phys might be left with the resources assigned in the previous state. Rework assigning of hw_pp / hw_ctl to the dpu_encoder_phys in order to make sure they are always set correctly. Fixes: b954fa6baaca ("drm/msm/dpu: Refactor rm iterator") Suggested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/612233/ Link: https://lore.kernel.org/r/20240903-dpu-mode-config-width-v6-1-617e1ecc4b7a@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-10-14firmware: arm_ffa: Avoid string-fortify warning in export_uuid()Arnd Bergmann
Copying to a 16 byte structure into an 8-byte struct member causes a compile-time warning: | In file included from drivers/firmware/arm_ffa/driver.c:25: | In function 'fortify_memcpy_chk', | inlined from 'export_uuid' at include/linux/uuid.h:88:2, | inlined from 'ffa_msg_send_direct_req2' at drivers/firmware/arm_ffa/driver.c:488:2: | include/linux/fortify-string.h:571:25: error: call to '__write_overflow_field' | declared with attribute warning: detected write beyond size of field | (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] | __write_overflow_field(p_size_field, size); Use a union for the conversion instead and make sure the byte order is fixed in the process. Fixes: aaef3bc98129 ("firmware: arm_ffa: Add support for FFA_MSG_SEND_DIRECT_{REQ,RESP}2") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Message-Id: <20240909110938.247976-1-arnd@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-10-14drm/panel: himax-hx83102: Adjust power and gamma to optimize brightnessCong Yang
The current panel brightness is only 360 nit. Adjust the power and gamma to optimize the panel brightness. The brightness after adjustment is 390 nit. Fixes: 3179338750d8 ("drm/panel: himax-hx83102: Support for IVO t109nw41 MIPI-DSI panel") Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241011020819.1254157-1-yangcong5@huaqin.corp-partner.google.com
2024-10-13Merge tag 'hid-for-linus-2024101301' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - fix for memory corruption regression in amd_sfh driver (Basavaraj Natikar) - fix for mis-reporting of BTN_TOOL_PEN and BTN_TOOL_RUBBER for AES sensors tools in Wacom driver (Jason Gerecke) - fix for unitialized variable use in intel-ish-hid driver (SurajSonawane2415) - a few device-specific quirks / device ID additions * tag 'hid-for-linus-2024101301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: wacom: Hardcode (non-inverted) AES pens as BTN_TOOL_PEN HID: amd_sfh: Switch to device-managed dmam_alloc_coherent() HID: multitouch: Add quirk for HONOR MagicBook Art 14 touchpad HID: multitouch: Add support for B2402FVA track point HID: plantronics: Workaround for an unexcepted opposite volume key hid: intel-ish-hid: Fix uninitialized variable 'rv' in ish_fw_xfer_direct_dma
2024-10-13Merge tag 'usb-6.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for some reported problems for 6.12-rc3. Include in here is: - fix for yurex driver that was caused in -rc1 - build error fix for usbg network filesystem code - onboard_usb_dev build fix - dwc3 driver fixes for reported errors - gadget driver fix - new USB storage driver quirk - xhci resume bugfix All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: net/9p/usbg: Fix build error USB: yurex: kill needless initialization in yurex_read Revert "usb: yurex: Replace snprintf() with the safer scnprintf() variant" usb: xhci: Fix problem with xhci resume from suspend usb: misc: onboard_usb_dev: introduce new config symbol for usb5744 SMBus support usb: dwc3: core: Stop processing of pending events if controller is halted usb: dwc3: re-enable runtime PM after failed resume usb: storage: ignore bogus device raised by JieLi BR21 USB sound chip usb: gadget: core: force synchronous registration
2024-10-13misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for OTP deviceHeiko Thiery
By using NVMEM_DEVID_AUTO we support more than 1 device and automatically enumerate. Fixes: 0969001569e4 ("misc: microchip: pci1xxxx: Add support to read and write into PCI1XXXX OTP via NVMEM sysfs") Cc: stable@vger.kernel.org Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Michael Walle <mwalle@kernel.org> Link: https://lore.kernel.org/r/20241007071120.9522-2-heiko.thiery@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-13misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for EEPROM deviceHeiko Thiery
By using NVMEM_DEVID_AUTO we support more than 1 device and automatically enumerate. Fixes: 9ab5465349c0 ("misc: microchip: pci1xxxx: Add support to read and write into PCI1XXXX EEPROM via NVMEM sysfs") Cc: stable@vger.kernel.org Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Michael Walle <mwalle@kernel.org> Link: https://lore.kernel.org/r/20241007071120.9522-1-heiko.thiery@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-13parport: Proper fix for array out-of-bounds accessTakashi Iwai
The recent fix for array out-of-bounds accesses replaced sprintf() calls blindly with snprintf(). However, since snprintf() returns the would-be-printed size, not the actually output size, the length calculation can still go over the given limit. Use scnprintf() instead of snprintf(), which returns the actually output letters, for addressing the potential out-of-bounds access properly. Fixes: ab11dac93d2d ("dev/parport: fix the array out-of-bounds risk") Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240920103318.19271-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-13Merge tag 'iio-fixes-for-6.12a' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus Jonathan writes: IIO: 1st set of fixes for the 6.12 cycle. Most of this pull request is the result of Javier Carrasco doing a careful audit for missing Kconfig dependencies that luck has meant the random builds have never hit. The rest is the usual mix of old bugs that have surfaced and some fallout from the recent merge window. adi,ad5686 - Fix binding duplication of compatible strings. bosch,bma400 - Fix an uninitialized variable in the event tap handling. bosch,bmi323 - Fix several issues in the register saving and restore on suspend/resume sensiron,spd500 - Fix missing CRC8 dependency ti,op3001 - Fix a missing full-scale range value (values above this point were all reported wrongly) vishay,veml6030 - Fix a segmentation fault due to some type confusion. - Fix wrong ambient light sensor resolution. * tag 'iio-fixes-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (34 commits) iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig iio: frequency: {admv4420,adrf6780}: format Kconfig entries iio: adc: ad4695: Add missing Kconfig select iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency() iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config() iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig iio: resolver: ad2s1210: add missing select (TRIGGERED_)BUFFER in Kconfig iio: resolver: ad2s1210 add missing select REGMAP in Kconfig iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: pressure: bm1390: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: magnetometer: af8133j: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: light: bu27008: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: chemical: ens160: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: dac: ad5766: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: dac: ad3552r: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig ...
2024-10-12accel/qaic: Fix the for loop used to walk SG tablePranjal Ramajor Asha Kanojiya
Only for_each_sgtable_dma_sg() should be used to walk through a SG table to grab correct bus address and length pair after calling DMA MAP API on a SG table as DMA MAP APIs updates the SG table and for_each_sgtable_sg() walks through the original SG table. Fixes: ff13be830333 ("accel/qaic: Add datapath") Fixes: 129776ac2e38 ("accel/qaic: Add control path") Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241004193252.3888544-1-quic_jhugo@quicinc.com
2024-10-12pinctrl: ocelot: fix system hang on level based interruptsSergey Matsievskiy
The current implementation only calls chained_irq_enter() and chained_irq_exit() if it detects pending interrupts. ``` for (i = 0; i < info->stride; i++) { uregmap_read(info->map, id_reg + 4 * i, &reg); if (!reg) continue; chained_irq_enter(parent_chip, desc); ``` However, in case of GPIO pin configured in level mode and the parent controller configured in edge mode, GPIO interrupt might be lowered by the hardware. In the result, if the interrupt is short enough, the parent interrupt is still pending while the GPIO interrupt is cleared; chained_irq_enter() never gets called and the system hangs trying to service the parent interrupt. Moving chained_irq_enter() and chained_irq_exit() outside the for loop ensures that they are called even when GPIO interrupt is lowered by the hardware. The similar code with chained_irq_enter() / chained_irq_exit() functions wrapping interrupt checking loop may be found in many other drivers: ``` grep -r -A 10 chained_irq_enter drivers/pinctrl ``` Cc: stable@vger.kernel.org Signed-off-by: Sergey Matsievskiy <matsievskiysv@gmail.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/20241012105743.12450-2-matsievskiysv@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-10-12Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four small fixes, three in drivers and one in the FC transport class to add idempotence to state setting" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_transport_fc: Allow setting rport state to current state scsi: wd33c93: Don't use stale scsi_pointer value scsi: fnic: Move flush_work initialization out of if block scsi: ufs: Use pre-calculated offsets in ufshcd_init_lrb()
2024-10-12Merge tag 'hwmon-for-v6.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Add missing dependencies on REGMAP_I2C for several drivers - Fix memory leak in adt7475 driver - Relabel Columbiaville temperature sensor in intel-m10-bmc-hwmon driver to match other sensor labels * tag 'hwmon-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (max1668) Add missing dependency on REGMAP_I2C hwmon: (ltc2991) Add missing dependency on REGMAP_I2C hwmon: (adt7470) Add missing dependency on REGMAP_I2C hwmon: (adm9240) Add missing dependency on REGMAP_I2C hwmon: (mc34vr500) Add missing dependency on REGMAP_I2C hwmon: (tmp513) Add missing dependency on REGMAP_I2C hwmon: (adt7475) Fix memory leak in adt7475_fan_pwm_config() hwmon: intel-m10-bmc-hwmon: relabel Columbiaville to CVL Die Temperature
2024-10-11RDMA/bnxt_re: Fix the GID table lengthKalesh AP
GID table length is reported by FW. The gid index which is passed to the driver during modify_qp/create_ah is restricted by the sgid_index field of struct ib_global_route. sgid_index is u8 and the max sgid possible is 256. Each GID entry in HW will have 2 GID entries in the kernel gid table. So we can support twice the gid table size reported by FW. Also, restrict the max GID to 256 also. Fixes: 847b97887ed4 ("RDMA/bnxt_re: Restrict the max_gids to 256") Link: https://patch.msgid.link/r/1728373302-19530-11-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-11RDMA/bnxt_re: Fix a bug while setting up Level-2 PBL pagesBhargava Chenna Marreddy
Avoid memory corruption while setting up Level-2 PBL pages for the non MR resources when num_pages > 256K. There will be a single PDE page address (contiguous pages in the case of > PAGE_SIZE), but, current logic assumes multiple pages, leading to invalid memory access after 256K PBL entries in the PDE. Fixes: 0c4dcd602817 ("RDMA/bnxt_re: Refactor hardware queue memory allocation") Link: https://patch.msgid.link/r/1728373302-19530-10-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-11RDMA/bnxt_re: Change the sequence of updating the CQ toggle valueChandramohan Akula
Currently the CQ toggle value in the shared page (read by the userlib) is updated as part of the cqn_handler. There is a potential race of application calling the CQ ARM doorbell immediately and using the old toggle value. Change the sequence of updating CQ toggle value to update in the bnxt_qplib_service_nq function immediately after reading the toggle value to be in sync with the HW updated value. Fixes: e275919d9669 ("RDMA/bnxt_re: Share a page to expose per CQ info with userspace") Link: https://patch.msgid.link/r/1728373302-19530-9-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com> Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-11RDMA/bnxt_re: Fix an error path in bnxt_re_add_deviceKalesh AP
In bnxt_re_add_device(), when register netdev notifier fails, driver is not unregistering the IB device in the error cleanup path. Also, removed the duplicate cleanup in error path of bnxt_re_probe. Fixes: 94a9dc6ac8f7 ("RDMA/bnxt_re: Group all operations under add_device and remove_device") Link: https://patch.msgid.link/r/1728373302-19530-8-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-11RDMA/bnxt_re: Avoid CPU lockups due fifo occupancy check loopSelvin Xavier
Driver waits indefinitely for the fifo occupancy to go below a threshold as soon as the pacing interrupt is received. This can cause soft lockup on one of the processors, if the rate of DB is very high. Add a loop count for FPGA and exit the __wait_for_fifo_occupancy_below_th if the loop is taking more time. Pacing will be continuing until the occupancy is below the threshold. This is ensured by the checks in bnxt_re_pacing_timer_exp and further scheduling the work for pacing based on the fifo occupancy. Fixes: 2ad4e6303a6d ("RDMA/bnxt_re: Implement doorbell pacing algorithm") Link: https://patch.msgid.link/r/1728373302-19530-7-git-send-email-selvin.xavier@broadcom.com Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-11RDMA/bnxt_re: Fix a possible NULL pointer dereferenceKalesh AP
There is a possibility of a NULL pointer dereference in the failure path of bnxt_re_add_device(). To address that, moved the update of "rdev->adev" to bnxt_re_dev_add(). Fixes: dee3da3422d5 ("RDMA/bnxt_re: Change aux driver data to en_info to hold more information") Link: https://patch.msgid.link/r/1728373302-19530-6-git-send-email-selvin.xavier@broadcom.com Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-rdma/CAH-L+nMCwymKGqf5pd8-FZNhxEkDD=kb6AoCaE6fAVi7b3e5Qw@mail.gmail.com/T/#t Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-11RDMA/bnxt_re: Return more meaningful errorKalesh AP
When the HWRM command fails, driver currently returns -EFAULT(Bad address). This does not look correct. Modified to return -EIO(I/O error). Fixes: cc1ec769b87c ("RDMA/bnxt_re: Fixing the Control path command and response handling") Fixes: 65288a22ddd8 ("RDMA/bnxt_re: use shadow qd while posting non blocking rcfw command") Link: https://patch.msgid.link/r/1728373302-19530-5-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-11RDMA/bnxt_re: Fix incorrect dereference of srq in async eventKashyap Desai
Currently driver is not getting correct srq. Dereference only if qplib has a valid srq. Fixes: b02fd3f79ec3 ("RDMA/bnxt_re: Report async events and errors") Link: https://patch.msgid.link/r/1728373302-19530-4-git-send-email-selvin.xavier@broadcom.com Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-11RDMA/bnxt_re: Fix out of bound checkKalesh AP
Driver exports pacing stats only on GenP5 and P7 adapters. But while parsing the pacing stats, driver has a check for "rdev->dbr_pacing". This caused a trace when KASAN is enabled. BUG: KASAN: slab-out-of-bounds in bnxt_re_get_hw_stats+0x2b6a/0x2e00 [bnxt_re] Write of size 8 at addr ffff8885942a6340 by task modprobe/4809 Fixes: 8b6573ff3420 ("bnxt_re: Update the debug counters for doorbell pacing") Link: https://patch.msgid.link/r/1728373302-19530-3-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-11RDMA/bnxt_re: Fix the max CQ WQEs for older adaptersAbhishek Mohapatra
Older adapters doesn't support the MAX CQ WQEs reported by older FW. So restrict the value reported to 1M always for older adapters. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://patch.msgid.link/r/1728373302-19530-2-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Abhishek Mohapatra<abhishek.mohapatra@broadcom.com> Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-11Merge tag 'devicetree-fixes-for-6.12-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Disable kunit tests for arm64+ACPI - Fix refcount issue in kunit tests - Drop constraints on non-conformant 'interrupt-map' in fsl,ls-extirq - Drop type ref on 'msi-parent in fsl,qoriq-mc binding - Move elgin,jg10309-01 to its own binding from trivial-devices * tag 'devicetree-fixes-for-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: Skip kunit tests when arm64+ACPI doesn't populate root node of: Fix unbalanced of node refcount and memory leaks dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number dt-bindings: misc: fsl,qoriq-mc: remove ref for msi-parent dt-bindings: display: elgin,jg10309-01: Add own binding
2024-10-11Merge tag 'fbdev-for-6.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev platform driver fix from Helge Deller: "Switch fbdev drivers back to struct platform_driver::remove() Now that 'remove()' has been converted to the sane new API, there's no reason for the 'remove_new()' use, so this converts back to the traditional and simpler name. See commits 5c5a7680e67b ("platform: Provide a remove callback that returns no value") 0edb555a65d1 ("platform: Make platform_driver::remove() return void") for background to this all" * tag 'fbdev-for-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: Switch back to struct platform_driver::remove()
2024-10-11net: enetc: disable NAPI after all rings are disabledWei Fang
When running "xdp-bench tx eno0" to test the XDP_TX feature of ENETC on LS1028A, it was found that if the command was re-run multiple times, Rx could not receive the frames, and the result of xdp-bench showed that the rx rate was 0. root@ls1028ardb:~# ./xdp-bench tx eno0 Hairpinning (XDP_TX) packets on eno0 (ifindex 3; driver fsl_enetc) Summary 2046 rx/s 0 err,drop/s Summary 0 rx/s 0 err,drop/s Summary 0 rx/s 0 err,drop/s Summary 0 rx/s 0 err,drop/s By observing the Rx PIR and CIR registers, CIR is always 0x7FF and PIR is always 0x7FE, which means that the Rx ring is full and can no longer accommodate other Rx frames. Therefore, the problem is caused by the Rx BD ring not being cleaned up. Further analysis of the code revealed that the Rx BD ring will only be cleaned if the "cleaned_cnt > xdp_tx_in_flight" condition is met. Therefore, some debug logs were added to the driver and the current values of cleaned_cnt and xdp_tx_in_flight were printed when the Rx BD ring was full. The logs are as follows. [ 178.762419] [XDP TX] >> cleaned_cnt:1728, xdp_tx_in_flight:2140 [ 178.771387] [XDP TX] >> cleaned_cnt:1941, xdp_tx_in_flight:2110 [ 178.776058] [XDP TX] >> cleaned_cnt:1792, xdp_tx_in_flight:2110 From the results, the max value of xdp_tx_in_flight has reached 2140. However, the size of the Rx BD ring is only 2048. So xdp_tx_in_flight did not drop to 0 after enetc_stop() is called and the driver does not clear it. The root cause is that NAPI is disabled too aggressively, without having waited for the pending XDP_TX frames to be transmitted, and their buffers recycled, so that xdp_tx_in_flight cannot naturally drop to 0. Later, enetc_free_tx_ring() does free those stale, unsent XDP_TX packets, but it is not coded up to also reset xdp_tx_in_flight, hence the manifestation of the bug. One option would be to cover this extra condition in enetc_free_tx_ring(), but now that the ENETC_TX_DOWN exists, we have created a window at the beginning of enetc_stop() where NAPI can still be scheduled, but any concurrent enqueue will be blocked. Therefore, enetc_wait_bdrs() and enetc_disable_tx_bdrs() can be called with NAPI still scheduled, and it is guaranteed that this will not wait indefinitely, but instead give us an indication that the pending TX frames have orderly dropped to zero. Only then should we call napi_disable(). This way, enetc_free_tx_ring() becomes entirely redundant and can be dropped as part of subsequent cleanup. The change also refactors enetc_start() so that it looks like the mirror opposite procedure of enetc_stop(). Fixes: ff58fda09096 ("net: enetc: prioritize ability to go down over packet processing") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241010092056.298128-5-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-11net: enetc: disable Tx BD rings after they are emptyWei Fang
The Tx BD rings are disabled first in enetc_stop() and the driver waits for them to become empty. This operation is not safe while the ring is actively transmitting frames, and will cause the ring to not be empty and hardware exception. As described in the NETC block guide, software should only disable an active Tx ring after all pending ring entries have been consumed (i.e. when PI = CI). Disabling a transmit ring that is actively processing BDs risks a HW-SW race hazard whereby a hardware resource becomes assigned to work on one or more ring entries only to have those entries be removed due to the ring becoming disabled. When testing XDP_REDIRECT feautre, although all frames were blocked from being put into Tx rings during ring reconfiguration, the similar warning log was still encountered: fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear The reason is that when there are still unsent frames in the Tx ring, disabling the Tx ring causes the remaining frames to be unable to be sent out. And the Tx ring cannot be restored, which means that even if the xdp program is uninstalled, the Tx frames cannot be sent out anymore. Therefore, correct the operation order in enect_start() and enect_stop(). Fixes: ff58fda09096 ("net: enetc: prioritize ability to go down over packet processing") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241010092056.298128-4-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-11net: enetc: block concurrent XDP transmissions during ring reconfigurationWei Fang
When testing the XDP_REDIRECT function on the LS1028A platform, we found a very reproducible issue that the Tx frames can no longer be sent out even if XDP_REDIRECT is turned off. Specifically, if there is a lot of traffic on Rx direction, when XDP_REDIRECT is turned on, the console may display some warnings like "timeout for tx ring #6 clear", and all redirected frames will be dropped, the detailed log is as follows. root@ls1028ardb:~# ./xdp-bench redirect eno0 eno2 Redirecting from eno0 (ifindex 3; driver fsl_enetc) to eno2 (ifindex 4; driver fsl_enetc) [203.849809] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #5 clear [204.006051] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear [204.161944] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear eno0->eno2 1420505 rx/s 1420590 err,drop/s 0 xmit/s xmit eno0->eno2 0 xmit/s 1420590 drop/s 0 drv_err/s 15.71 bulk-avg eno0->eno2 1420484 rx/s 1420485 err,drop/s 0 xmit/s xmit eno0->eno2 0 xmit/s 1420485 drop/s 0 drv_err/s 15.71 bulk-avg By analyzing the XDP_REDIRECT implementation of enetc driver, the driver will reconfigure Tx and Rx BD rings when a bpf program is installed or uninstalled, but there is no mechanisms to block the redirected frames when enetc driver reconfigures rings. Similarly, XDP_TX verdicts on received frames can also lead to frames being enqueued in the Tx rings. Because XDP ignores the state set by the netif_tx_wake_queue() API, so introduce the ENETC_TX_DOWN flag to suppress transmission of XDP frames. Fixes: c33bfaf91c4c ("net: enetc: set up XDP program under enetc_reconfigure()") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241010092056.298128-3-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-11net: enetc: remove xdp_drops statistic from enetc_xdp_drop()Wei Fang
The xdp_drops statistic indicates the number of XDP frames dropped in the Rx direction. However, enetc_xdp_drop() is also used in XDP_TX and XDP_REDIRECT actions. If frame loss occurs in these two actions, the frames loss count should not be included in xdp_drops, because there are already xdp_tx_drops and xdp_redirect_failures to count the frame loss of these two actions, so it's better to remove xdp_drops statistic from enetc_xdp_drop() and increase xdp_drops in XDP_DROP action. Fixes: 7ed2bc80074e ("net: enetc: add support for XDP_TX") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241010092056.298128-2-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-11net: sparx5: fix source port register when mirroringDaniel Machon
When port mirroring is added to a port, the bit position of the source port, needs to be written to the register ANA_AC_PROBE_PORT_CFG. This register is replicated for n_ports > 32, and therefore we need to derive the correct register from the port number. Before this patch, we wrongly calculate the register from portno / BITS_PER_BYTE, where the divisor ought to be 32, causing any port >=8 to be written to the wrong register. We fix this, by using do_div(), where the dividend is the register, the remainder is the bit position and the divisor is now 32. Fixes: 4e50d72b3b95 ("net: sparx5: add port mirroring implementation") Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241009-mirroring-fix-v1-1-9ec962301989@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-11Merge tag 'gpio-fixes-for-v6.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix clock handle leak in probe() error path in gpio-aspeed - add a dummy register read to ensure the write actually completed * tag 'gpio-fixes-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: aspeed: Use devm_clk api to manage clock source gpio: aspeed: Add the flush write to ensure the write complete.
2024-10-11pinctrl: nuvoton: fix a double free in ma35_pinctrl_dt_node_to_map_func()Harshit Mogalapalli
'new_map' is allocated using devm_* which takes care of freeing the allocated data on device removal, call to .dt_free_map = pinconf_generic_dt_free_map double frees the map as pinconf_generic_dt_free_map() calls pinctrl_utils_free_map(). Fix this by using kcalloc() instead of auto-managed devm_kcalloc(). Cc: stable@vger.kernel.org Fixes: f805e356313b ("pinctrl: nuvoton: Add ma35d1 pinctrl and GPIO driver") Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/20241010205237.1245318-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-10-11Merge tag 'pm-6.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These address two issues in the TPMI module of the Intel RAPL power capping driver and one issue in the processor part of the Intel int340x thermal driver, update a CPU ID list and register definitions needed for RAPL PL4 support and remove some unused code. Specifics: - Fix the TPMI_RAPL_REG_DOMAIN_INFO register offset in the TPMI part of the Intel RAPL power capping driver, make it ignore minor hardware version mismatches (which only indicate exposing additional features) and update register definitions in it to enable PL4 support (Zhang Rui) - Add Arrow Lake-U to the list of processors supporting PL4 in the MSR part of the Intel RAPL power capping driver (Sumeet Pawnikar) - Remove excess pci_disable_device() calls from the processor part of the int340x thermal driver to address a warning triggered during module unload and remove unused CPU hotplug code related to RAPL support from it (Zhang Rui)" * tag 'pm-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: intel: int340x: processor: Add MMIO RAPL PL4 support thermal: intel: int340x: processor: Remove MMIO RAPL CPU hotplug support powercap: intel_rapl_msr: Add PL4 support for Arrowlake-U powercap: intel_rapl_tpmi: Ignore minor version change thermal: intel: int340x: processor: Fix warning during module unload powercap: intel_rapl_tpmi: Fix bogus register reading
2024-10-11Merge tag 'thermal-6.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "Address possible use-after-free scenarios during the processing of thermal netlink commands and during thermal zone removal (Rafael Wysocki)" * tag 'thermal-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: core: Free tzp copy along with the thermal zone thermal: core: Reference count the zone in thermal_zone_get_by_id()
2024-10-11Merge tag 'acpi-6.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "Reduce the number of ACPI IRQ override DMI quirks by combining quirks that cover similar systems while making them cover additional models at the same time (Hans de Goede)" * tag 'acpi-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: resource: Fold Asus Vivobook Pro N6506M* DMI quirks together ACPI: resource: Fold Asus ExpertBook B1402C* and B1502C* DMI quirks together ACPI: resource: Make Asus ExpertBook B2502 matches cover more models ACPI: resource: Make Asus ExpertBook B2402 matches cover more models
2024-10-11Merge tag 'pmdomain-v6.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain fixes from Ulf Hansson: "pmdomain core: - Fix alloc/free in dev_pm_domain_attach|detach_list() pmdomain providers: - qcom: Fix the return of uninitialized variable pmdomain consumers: - drm/tegra/gr3d: Revert conversion to dev_pm_domain_attach|detach_list() OPP core: - Fix error code in dev_pm_opp_set_config()" * tag 'pmdomain-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: PM: domains: Fix alloc/free in dev_pm_domain_attach|detach_list() Revert "drm/tegra: gr3d: Convert into dev_pm_domain_attach|detach_list()" pmdomain: qcom-cpr: Fix the return of uninitialized variable OPP: fix error code in dev_pm_opp_set_config()
2024-10-11Merge tag 'mmc-v6.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Prevent splat from warning when setting maximum DMA segment MMC host: - mvsdio: Drop sg_miter support for PIO as it didn't work - sdhci-of-dwcmshc: Prevent stale interrupt for the T-Head 1520 variant" * tag 'mmc-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-of-dwcmshc: Prevent stale command interrupt handling Revert "mmc: mvsdio: Use sg_miter for PIO" mmc: core: Only set maximum DMA segment size if DMA is supported
2024-10-11Merge tag 'ata-6.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull ata fixes from Niklas Cassel: - Fix a hibernate regression where the disk was needlessly spun down and then immediately spun up both when entering and when resuming from hibernation (me) - Update the MAINTAINERS file to remove remnants from Jens maintainership of libata (Damien) * tag 'ata-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: libata: Update MAINTAINERS file ata: libata: avoid superfluous disk spin down + spin up during hibernation
2024-10-11Merge tag 'drm-fixes-2024-10-11' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly fixes haul for drm, lots of small fixes all over, amdgpu, xe lead the way, some minor nouveau and radeon fixes, and then a bunch of misc all over. Nothing too scary or out of the unusual. sched: - Avoid leaking lockdep map fbdev-dma: - Only clean up deferred I/O if instanciated amdgpu: - Fix invalid UBSAN warnings - Fix artifacts in MPO transitions - Hibernation fix amdkfd: - Fix an eviction fence leak radeon: - Add late register for connectors - Always set GEM function pointers i915: - HDCP refcount fix nouveau: - dmem: Fix privileged error in copy engine channel; Fix possible data leak in migrate_to_ram() - gsp: Fix coding style v3d: - Stop active perfmon before destroying it vc4: - Stop active perfmon before destroying it xe: - Drop GuC submit_wq pool - Fix error checking with xa_store() - Fix missing freq restore on GSC load error - Fix wedged_mode file permission - Fix use-after-free in ct communication" * tag 'drm-fixes-2024-10-11' of https://gitlab.freedesktop.org/drm/kernel: drm/fbdev-dma: Only cleanup deferred I/O if necessary drm/xe: Make wedged_mode debugfs writable drm/xe: Restore GT freq on GSC load error drm/xe/guc_submit: fix xa_store() error checking drm/xe/ct: fix xa_store() error checking drm/xe/ct: prevent UAF in send_recv() drm/radeon: always set GEM function pointer nouveau/dmem: Fix vulnerability in migrate_to_ram upon copy error nouveau/dmem: Fix privileged error in copy engine channel drm/amd/display: fix hibernate entry for DCN35+ drm/amd/display: Clear update flags after update has been applied drm/amdgpu: partially revert powerplay `__counted_by` changes drm/radeon: add late_register for connector drm/amdkfd: Fix an eviction fence leak drm/vc4: Stop the active perfmon before being destroyed drm/v3d: Stop the active perfmon before being destroyed drm/i915/hdcp: fix connector refcounting drm/nouveau/gsp: remove extraneous ; after mutex drm/xe: Drop GuC submit_wq pool drm/sched: Use drm sched lockdep map for submit_wq
2024-10-11RDMA/srpt: Make slab cache names uniqueBart Van Assche
Since commit 4c39529663b9 ("slab: Warn on duplicate cache names when DEBUG_VM=y"), slab complains about duplicate cache names. Hence this patch. The approach is as follows: - Maintain an xarray with the slab size as index and a reference count and a kmem_cache pointer as contents. Use srpt-${slab_size} as kmem cache name. - Use 512-byte alignment for all slabs instead of only for some of the slabs. - Increment the reference count instead of calling kmem_cache_create(). - Decrement the reference count instead of calling kmem_cache_destroy(). Fixes: 5dabcd0456d7 ("RDMA/srpt: Add support for immediate data") Link: https://patch.msgid.link/r/20241009210048.4122518-1-bvanassche@acm.org Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Closes: https://lore.kernel.org/linux-block/xpe6bea7rakpyoyfvspvin2dsozjmjtjktpph7rep3h25tv7fb@ooz4cu5z6bq6/ Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-11RDMA/irdma: Fix misspelling of "accept*"Alexander Zubkov
There is "accept*" misspelled as "accpet*" in the comments. Fix the spelling. Fixes: 146b9756f14c ("RDMA/irdma: Add connection manager") Link: https://patch.msgid.link/r/20241008161913.19965-1-green@qrator.net Signed-off-by: Alexander Zubkov <green@qrator.net> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
generated by cgit (git 2.34.1) at 2025-09-11 10:39:17 +0000