summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-02-10Merge tag 'drm-intel-fixes-2023-02-09' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Display watermark fix (Ville) - fbdev fix for PSR, FBC, DRRS (Jouni) - Move fd_install after last use of fence (Rob) - Initialize the obj flags for shmem objects (Aravind) - Fix VBT DSI DVO port handling (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y+UZ0rh2YlhTrE4t@intel.com
2023-02-10Merge tag 'drm-misc-fixes-2023-02-09' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes A fix for a circular refcounting in drm/client, one for a memory leak in amdgpu and a virtio fence fix when interrupted Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230209083600.7hi6roht6xxgldgz@houat
2023-02-09rtc: jz4740: Register clock provider for the CLK32K pinPaul Cercueil
On JZ4770 and JZ4780, the CLK32K pin is configurable. By default, it is configured as a GPIO in input mode, and its value can be read through GPIO PD14. With this change, clients can now request the 32 kHz clock on the CLK32K pin, through Device Tree. This clock is simply a pass-through of the input oscillator's clock with enable/disable operations. This will permit the WiFi/Bluetooth chip to work on the MIPS CI20 board, which does source one of its clocks from the CLK32K pin. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20230129120442.22858-5-paul@crapouillou.net Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09rtc: jz4740: Use dev_err_probe()Paul Cercueil
Use dev_err_probe() where it makes sense to simplify a bit the code. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20230129120442.22858-4-paul@crapouillou.net Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09rtc: jz4740: Use readl_poll_timeoutPaul Cercueil
Use readl_poll_timeout() from <iopoll.h> instead of using custom poll loops. The timeout settings are different, but that shouldn't be much of a problem. Instead of polling 10000 times in a close loop, it polls for one millisecond. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20230129120442.22858-3-paul@crapouillou.net Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09rtc: moxart: switch to using gpiod APIDmitry Torokhov
Switch the driver from legacy gpio API that is deprecated to the newer gpiod API that respects line polarities described in ACPI/DT. This makes driver use standard property name for its gpios ("rtc-*-gpios" vs "gpios-rtc-*"), however there is a quirk in gpiolib to also recognize legacy names and keep compatibility with older DTSes: eaf1a29665cd ("gpiolib: of: add a quirk for legacy names in MOXA ART RTC"). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20230201054815.4112632-1-dmitry.torokhov@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09rtc: pm8xxx: drop error messagesJohan Hovold
For consistency with the rest of the driver, drop the last two error messages for conditions that should only occur during development, if ever. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230202155448.6715-16-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09rtc: pm8xxx: clean up local declarationsJohan Hovold
Clean up local declarations somewhat by using the reverse xmas style consistently throughout. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: David Collins <quic_collinsd@quicinc.com> Link: https://lore.kernel.org/r/20230202155448.6715-15-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09rtc: pm8xxx: refactor read_time()Johan Hovold
In preparation for adding support for setting the time by means of an externally stored offset, refactor read_time() by adding a new helper that can be used to retrieve the raw time as stored in the RTC. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230202155448.6715-14-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09rtc: pm8xxx: use u32 for timestampsJohan Hovold
The PMIC RTC registers are 32-bit so explicitly use u32 rather than unsigned long for timestamps to reflect the hardware. This will also help avoid unintentional range extensions when adding support for managing an external offset. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230202155448.6715-13-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09rtc: pm8xxx: clean up commentsJohan Hovold
Clean up the driver comments somewhat and remove obsolete, incorrect or redundant ones. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: David Collins <quic_collinsd@quicinc.com> Link: https://lore.kernel.org/r/20230202155448.6715-12-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09rtc: pm8xxx: rename alarm irq variableJohan Hovold
Clean up the driver somewhat by renaming the driver-data alarm irq variable by dropping the redundant "rtc" prefix. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: David Collins <quic_collinsd@quicinc.com> Link: https://lore.kernel.org/r/20230202155448.6715-11-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09rtc: pm8xxx: rename struct device pointerJohan Hovold
Rename the driver-data struct device pointer by dropping the "rtc" prefix which is both redundant and misleading (as this is a pointer to the platform device and not the rtc class device). Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: David Collins <quic_collinsd@quicinc.com> Link: https://lore.kernel.org/r/20230202155448.6715-10-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09rtc: pm8xxx: clean up time and alarm debuggingJohan Hovold
Clean up the time and alarm callback debugging by using a consistent and succinct human-readable (i.e. non-raw) format. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: David Collins <quic_collinsd@quicinc.com> Link: https://lore.kernel.org/r/20230202155448.6715-9-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09rtc: pm8xxx: use unaligned le32 helpersJohan Hovold
Use the unaligned le32 helpers instead of open coding when accessing the time and alarm registers. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: David Collins <quic_collinsd@quicinc.com> Link: https://lore.kernel.org/r/20230202155448.6715-8-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09rtc: pm8xxx: drop unused register definesJohan Hovold
Drop the original register defines which have been unused since commit c8d523a4b053 ("drivers/rtc/rtc-pm8xxx.c: rework to support pm8941 rtc"). Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: David Collins <quic_collinsd@quicinc.com> Link: https://lore.kernel.org/r/20230202155448.6715-7-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09Bluetooth: btintel: Set Per Platform Antenna Gain(PPAG)Seema Sreemantha
Antenna gain is defined as the antenna’s ability to increase the Tx power in a given direction. Intel is certifying its products with fixed reference antenna peak gain values (3/5dBi). The feature takes into account the actual antenna gain, and increases output power values, which results in a performance improvement. After firmware download is completed, driver reads from ACPI table and configures PPAG as required. ACPI table entry for PPAG is defined as below. Name (PPAG, Package (0x02) { 0x00000001, Package (0x02) { 0x00000012, /* Bluetooth Domain */ 0x00000001 /* 1 - Enable PPAG, 0 - Disable PPAG */ } }) btmon log: < HCI Command: Intel Configure Per Platform Antenna Gain (0x3f|0x0219) plen 12 Mcc: 0x00000000 Selector: Enable Delta: 0x00000000 > HCI Event: Command Complete (0x0e) plen 4 Intel Configure Per Platform Antenna Gain (0x3f|0x0219) ncmd 1 Status: Success (0x00) Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Seema Sreemantha <seema.sreemantha@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-02-09Bluetooth: hci_qca: get wakeup status from serdev device handleZhengping Jiang
Bluetooth controller attached via the UART is handled by the serdev driver. Get the wakeup status from the device handle through serdev, instead of the parent path. Fixes: c1a74160eaf1 ("Bluetooth: hci_qca: Add device_may_wakeup support") Signed-off-by: Zhengping Jiang <jiangzp@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-02-09rtc: pm8xxx: return IRQ_NONE on errorsJohan Hovold
In the unlikely event that disabling the alarm and clearing the status ever fails, return IRQ_NONE instead of IRQ_HANDLED. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230202155448.6715-6-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09rtc: pm8xxx: drop bogus lockingJohan Hovold
Since commit c8d523a4b053 ("drivers/rtc/rtc-pm8xxx.c: rework to support pm8941 rtc") which removed the shadow control register there is no need for a driver lock. Specifically, the rtc ops are serialised by rtc core and the interrupt handler only unconditionally disables the alarm using the alarm_ctrl register. Note that since only the alarm enable bit of alarm_ctrl is used after enabling the RTC at probe, the locking was not needed when doing open coded read-modify-write cycles either. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: David Collins <quic_collinsd@quicinc.com> Link: https://lore.kernel.org/r/20230202155448.6715-5-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09rtc: pm8xxx: use regmap_update_bits()Johan Hovold
Switch to using regmap_update_bits() instead of open coding read-modify-write accesses. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: David Collins <quic_collinsd@quicinc.com> Link: https://lore.kernel.org/r/20230202155448.6715-4-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09rtc: pm8xxx: drop spmi error messagesJohan Hovold
Drop the unnecessary error messages after every spmi regmap access, which are not expected to fail. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230202155448.6715-3-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09rtc: pm8xxx: fix set-alarm raceJohan Hovold
Make sure to disable the alarm before updating the four alarm time registers to avoid spurious alarms during the update. Note that the disable needs to be done outside of the ctrl_reg_lock section to prevent a racing alarm interrupt from disabling the newly set alarm when the lock is released. Fixes: 9a9a54ad7aa2 ("drivers/rtc: add support for Qualcomm PMIC8xxx RTC") Cc: stable@vger.kernel.org # 3.1 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: David Collins <quic_collinsd@quicinc.com> Link: https://lore.kernel.org/r/20230202155448.6715-2-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09Bluetooth: qca: Fix sparse warningsLuiz Augusto von Dentz
This fixes the following warnings: drivers/bluetooth/hci_qca.c:1014:26: warning: cast to restricted __le16 drivers/bluetooth/hci_qca.c:1028:37: warning: cast to restricted __le32 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-02-09Bluetooth: btusb: Add VID:PID 13d3:3529 for Realtek RTL8821CEMoises Cardona
This patch adds VID:PID 13d3:3529 to the btusb.c file. This VID:PID is found in the Realtek RTL8821CE module (M.2 module AW-CB304NF on an ASUS E210MA laptop) Output of /sys/kernel/debug/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3529 Rev= 1.10 S: Manufacturer=Realtek S: Product=Bluetooth Radio C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Moises Cardona <moisesmcardona@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-02-09Bluetooth: btusb: Add new PID/VID 0489:e0f2 for MT7921Mario Limonciello
This bluetooth device is found in a combo WLAN/BT card for a MediaTek 7921e. The device information: T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0f2 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Cc: Sean Wang <sean.wang@mediatek.com> Cc: Anson Tsao <anson.tsao@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-02-09Bluetooth: Fix issue with Actions Semi ATS2851 based devicesMarcel Holtmann
Their devices claim to support the erroneous data reporting, but don't actually support the required commands. So blacklist them and add a quirk. < HCI Command: Read Default Erroneous Data Reporting (0x03|0x005a) plen 0 > HCI Event: Command Status (0x0f) plen 4 Read Default Erroneous Data Reporting (0x03|0x005a) ncmd 1 Status: Unknown HCI Command (0x01) T: Bus=02 Lev=02 Prnt=08 Port=02 Cnt=01 Dev#= 10 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=10d7 ProdID=b012 Rev=88.91 S: Manufacturer=Actions S: Product=general adapter S: SerialNumber=ACTIONS1234 C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=01(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=01(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=01(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=01(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=01(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=01(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-02-09rtc: rv8803: invalidate date/time if alarm time is invalidSascha Hauer
RTC core never calls rv8803_set_alarm with an invalid alarm time, so if an invalid alarm time > 0 is set, external factors must have corrupted the RTC's alarm time and possibly other registers. Play it safe by marking the date/time invalid, so all registers are reinitialized on a ->set_time. This may cause existing setups to lose time if they so far set only date/time, but ignored that the alarm registers had an invalid date value, e.g.: rtc rtc0: invalid alarm value: 2020-3-27 7:82:0 These systems will have their ->get_time return -EINVAL till ->set_time initializes the alarm value (and sets a new time). Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20221123095527.2771434-3-s.hauer@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
net/devlink/leftover.c / net/core/devlink.c: 565b4824c39f ("devlink: change port event netdev notifier from per-net to global") f05bd8ebeb69 ("devlink: move code to a dedicated directory") 687125b5799c ("devlink: split out core code") https://lore.kernel.org/all/20230208094657.379f2b1a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-09ACPI: CPPC: Fix some kernel-doc commentsYang Li
Add the description of @pcc_ss_id in pcc_data_alloc(). Add the description of @cpu_num in cppc_get_transition_latency(). clear the below warnings: drivers/acpi/cppc_acpi.c:607: warning: Function parameter or member 'pcc_ss_id' not described in 'pcc_data_alloc' drivers/acpi/cppc_acpi.c:1616: warning: Function parameter or member 'cpu_num' not described in 'cppc_get_transition_latency' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3983 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> [ rjw: Dropped redundant empty code lines, minor edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09cpuidle: sysfs: make kobj_type structures constantThomas Weißschuh
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.") the driver core allows the usage of const struct kobj_type. Take advantage of this to constify the structure definitions to prevent modification at runtime. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09thermal: intel: powerclamp: Add two module parametersSrinivas Pandruvada
In some use cases, it is desirable to only inject idle on certain set of CPUs. For example on Alder Lake systems, it is possible that we force idle only on P-Cores for thermal reasons. Also the idle percent can be more than 50% if we only choose partial set of CPUs in the system. Introduce 2 new module parameters for this purpose. They can be only changed when the cooling device is inactive. cpumask (Read/Write): A bit mask of CPUs to inject idle. The format of this bitmask is same as used in other subsystems like in /proc/irq/*/smp_affinity. The mask is comma separated 32 bit groups. Each CPU is one bit. For example for 256 CPU system the full mask is: ffffffff,ffffffff,ffffffff,ffffffff,ffffffff,ffffffff,ffffffff,ffffffff The rightmost mask is for CPU 0-32. max_idle (Read/Write): Maximum injected idle time to the total CPU time ratio in percent range from 1 to 100. Even if the cooling device max_state is always 100 (100%), this parameter allows to add a max idle percent limit. The default is 50, to match the current implementation of powerclamp driver. Also doesn't allow value more than 75, if the cpumask includes every CPU present in the system. Also when the cpumask doesn't include every CPU, there is no use of compensation using package C-state idle counters. Hence don't start package C-state polling thread even for a single package or a single die system in this case. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09cpuidle: add ARCH_SUSPEND_POSSIBLE dependenciesArnd Bergmann
Some ARMv4 processors don't support suspend, which leads to a build failure with the tegra and qualcomm cpuidle driver: WARNING: unmet direct dependencies detected for ARM_CPU_SUSPEND Depends on [n]: ARCH_SUSPEND_POSSIBLE [=n] Selected by [y]: - ARM_TEGRA_CPUIDLE [=y] && CPU_IDLE [=y] && (ARM [=y] || ARM64) && (ARCH_TEGRA [=n] || COMPILE_TEST [=y]) && !ARM64 && MMU [=y] arch/arm/kernel/sleep.o: in function `__cpu_suspend': (.text+0x68): undefined reference to `cpu_sa110_suspend_size' (.text+0x68): undefined reference to `cpu_fa526_suspend_size' Add an explicit dependency to make randconfig builds avoid this combination. Fixes: faae6c9f2e68 ("cpuidle: tegra: Enable compile testing") Fixes: a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver") Link: https://lore.kernel.org/all/20211013160125.772873-1-arnd@kernel.org/ Cc: All applicable <stable@vger.kernel.org> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09thermal: core: Use sysfs_emit_at() instead of scnprintf()ye xingchen
Follow the advice in Documentation/filesystems/sysfs.rst that show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09PM: domains: fix memory leak with using debugfs_lookup()Greg Kroah-Hartman
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09cpufreq: Make kobj_type structure constantThomas Weißschuh
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.") the driver core allows the usage of const struct kobj_type. Take advantage of this to constify the structure definition to prevent modification at runtime. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09cpufreq: davinci: Fix clk use after freeUwe Kleine-König
The remove function first frees the clks and only then calls cpufreq_unregister_driver(). If one of the cpufreq callbacks is called just before cpufreq_unregister_driver() is run, the freed clks might be used. Fixes: 6601b8030de3 ("davinci: add generic CPUFreq driver for DaVinci") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09cpufreq: amd-pstate: avoid uninitialized variable useArnd Bergmann
The new epp support causes warnings about three separate but related bugs: 1) failing before allocation should just return an error: drivers/cpufreq/amd-pstate.c:951:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (!dev) ^~~~ drivers/cpufreq/amd-pstate.c:1018:9: note: uninitialized use occurs here return ret; ^~~ 2) wrong variable to store return code: drivers/cpufreq/amd-pstate.c:963:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (rc) ^~ drivers/cpufreq/amd-pstate.c:1019:9: note: uninitialized use occurs here return ret; ^~~ drivers/cpufreq/amd-pstate.c:963:2: note: remove the 'if' if its condition is always false if (rc) ^~~~~~~ 3) calling amd_pstate_set_epp() in cleanup path after determining that it should not be called: drivers/cpufreq/amd-pstate.c:1055:6: error: variable 'epp' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (cpudata->epp_policy == cpudata->policy) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/cpufreq/amd-pstate.c:1080:30: note: uninitialized use occurs here amd_pstate_set_epp(cpudata, epp); ^~~ All three are trivial to fix, but most likely there are additional bugs in this function when the error handling was not really tested. Fixes: ffa5096a7c33 ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Wyes Karny <wyes.karny@amd.com> Reviewed-by: Yuan Perry <Perry.Yuan@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09cpufreq: Make cpufreq_unregister_driver() return voidUwe Kleine-König
All but a few drivers ignore the return value of cpufreq_unregister_driver(). Those few that don't only call it after cpufreq_register_driver() succeeded, in which case the call doesn't fail. Make the function return no value and add a WARN_ON for the case that the function is called in an invalid situation (i.e. without a previous successful call to cpufreq_register_driver()). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> # brcmstb-avs-cpufreq.c Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09Add MediaTek MT7986 SPI NAND supportMark Brown
Merge series from Xiangsheng Hou <xiangsheng.hou@mediatek.com>: This patch series split from bellow series which pick-up spi relevant patches https://lore.kernel.org/all/20230130030656.12127-1-xiangsheng.hou@mediatek.com. This series add MediaTek MT7986 SPI NAND controller support, add read latch latency, smaple delay adjust and add optional nfi_hclk.
2023-02-09thermal: intel: powerclamp: Fix duration module parameterSrinivas Pandruvada
After the switch to use the powercap/idle-inject framework in the Intel powerclamp driver, the idle duration unit is microsecond. However, the module parameter for idle duration is in milliseconds, so convert it to microseconds in the "set" callback and back to milliseconds in a new "get" callback. While here, also use mutex protection for setting and getting "duration". The other uses of "duration" are already protected by the mutex. Fixes: 8526eb7fc75a ("thermal: intel: powerclamp: Use powercap idle-inject feature") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09Merge tag 'pm-6.2-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix the incorrect value returned by cpufreq driver's ->get() callback for Qualcomm platforms (Douglas Anderson)" * tag 'pm-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: qcom-hw: Fix cpufreq_driver->get() for non-LMH systems
2023-02-09Merge back cpufreq material for 6.3-rc1.Rafael J. Wysocki
2023-02-09PCI/DPC: Await readiness of secondary bus after resetLukas Wunner
pci_bridge_wait_for_secondary_bus() is called after a Secondary Bus Reset, but not after a DPC-induced Hot Reset. As a result, the delays prescribed by PCIe r6.0 sec 6.6.1 are not observed and devices on the secondary bus may be accessed before they're ready. One affected device is Intel's Ponte Vecchio HPC GPU. It comprises a PCIe switch whose upstream port is not immediately ready after reset. Because its config space is restored too early, it remains in D0uninitialized, its subordinate devices remain inaccessible and DPC recovery fails with messages such as: i915 0000:8c:00.0: can't change power state from D3cold to D0 (config space inaccessible) intel_vsec 0000:8e:00.1: can't change power state from D3cold to D0 (config space inaccessible) pcieport 0000:89:02.0: AER: device recovery failed Fix it. Link: https://lore.kernel.org/r/9f5ff00e1593d8d9a4b452398b98aa14d23fca11.1673769517.git.lukas@wunner.de Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable@vger.kernel.org
2023-02-09vfio/mlx5: Fix range size calculation upon tracker creationYishai Hadas
Fix range size calculation to include the last byte of each range. In addition, log round up the length of the total ranges to be stricter. Fixes: c1d050b0d169 ("vfio/mlx5: Create and destroy page tracker object") Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/20230208152234.32370-1-yishaih@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-02-09vfio: no need to pass kvm pointer during device openMatthew Rosato
Nothing uses this value during vfio_device_open anymore so it's safe to remove it. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230203215027.151988-3-mjrosato@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-02-09vfio: fix deadlock between group lock and kvm lockMatthew Rosato
After 51cdc8bc120e, we have another deadlock scenario between the kvm->lock and the vfio group_lock with two different codepaths acquiring the locks in different order. Specifically in vfio_open_device, vfio holds the vfio group_lock when issuing device->ops->open_device but some drivers (like vfio-ap) need to acquire kvm->lock during their open_device routine; Meanwhile, kvm_vfio_release will acquire the kvm->lock first before calling vfio_file_set_kvm which will acquire the vfio group_lock. To resolve this, let's remove the need for the vfio group_lock from the kvm_vfio_release codepath. This is done by introducing a new spinlock to protect modifications to the vfio group kvm pointer, and acquiring a kvm ref from within vfio while holding this spinlock, with the reference held until the last close for the device in question. Fixes: 51cdc8bc120e ("kvm/vfio: Fix potential deadlock on vfio group_lock") Reported-by: Anthony Krowiak <akrowiak@linux.ibm.com> Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230203215027.151988-2-mjrosato@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-02-09vfio: revert "iommu driver notify callback"Steve Sistare
Revert this dead code: commit ec5e32940cc9 ("vfio: iommu driver notify callback") Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/1675184289-267876-8-git-send-email-steven.sistare@oracle.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-02-09vfio/type1: revert "implement notify callback"Steve Sistare
This is dead code. Revert it. commit 487ace134053 ("vfio/type1: implement notify callback") Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/1675184289-267876-7-git-send-email-steven.sistare@oracle.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-02-09vfio/type1: revert "block on invalid vaddr"Steve Sistare
Revert this dead code: commit 898b9eaeb3fe ("vfio/type1: block on invalid vaddr") Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/1675184289-267876-6-git-send-email-steven.sistare@oracle.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-19 04:18:26 +0000