summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-10-31net: hns3: fixed reset failure issues caused by the incorrect reset typeHao Lan
When a reset type that is not supported by the driver is input, a reset pending flag bit of the HNAE3_NONE_RESET type is generated in reset_pending. The driver does not have a mechanism to clear this type of error. As a result, the driver considers that the reset is not complete. This patch provides a mechanism to clear the HNAE3_NONE_RESET flag and the parameter of hnae3_ae_ops.set_default_reset_request is verified. The error message: hns3 0000:39:01.0: cmd failed -16 hns3 0000:39:01.0: hclge device re-init failed, VF is disabled! hns3 0000:39:01.0: failed to reset VF stack hns3 0000:39:01.0: failed to reset VF(4) hns3 0000:39:01.0: prepare reset(2) wait done hns3 0000:39:01.0 eth4: already uninitialized Use the crash tool to view struct hclgevf_dev: struct hclgevf_dev { ... default_reset_request = 0x20, reset_level = HNAE3_NONE_RESET, reset_pending = 0x100, reset_type = HNAE3_NONE_RESET, ... }; Fixes: 720bd5837e37 ("net: hns3: add set_default_reset_request in the hnae3_ae_ops") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-31net: hns3: add sync command to sync io-pgtableJian Shen
To avoid errors in pgtable prefectch, add a sync command to sync io-pagtable. This is a supplement for the previous patch. We want all the tx packet can be handled with tx bounce buffer path. But it depends on the remain space of the spare buffer, checked by the hns3_can_use_tx_bounce(). In most cases, maybe 99.99%, it returns true. But once it return false by no available space, the packet will be handled with the former path, which will map/unmap the skb buffer. Then the driver will face the smmu prefetch risk again. So add a sync command in this case to avoid smmu prefectch, just protects corner scenes. Fixes: 295ba232a8c3 ("net: hns3: add device version to replace pci revision") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-31net: hns3: default enable tx bounce buffer when smmu enabledPeiyang Wang
The SMMU engine on HIP09 chip has a hardware issue. SMMU pagetable prefetch features may prefetch and use a invalid PTE even the PTE is valid at that time. This will cause the device trigger fake pagefaults. The solution is to avoid prefetching by adding a SYNC command when smmu mapping a iova. But the performance of nic has a sharp drop. Then we do this workaround, always enable tx bounce buffer, avoid mapping/unmapping on TX path. This issue only affects HNS3, so we always enable tx bounce buffer when smmu enabled to improve performance. Fixes: 295ba232a8c3 ("net: hns3: add device version to replace pci revision") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-31drm/panel: leadtek-ltk050h3146w: transition to mipi_dsi wrapped functionsTejas Vipin
Changes the leadtek-ltk050h3146w panel to use multi style functions for improved error handling. Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20241026035928.183454-1-tejasvipin76@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241026035928.183454-1-tejasvipin76@gmail.com
2024-10-31drm/panel: samsung-s6e88a0-ams427ap24: Add flip optionJakob Hauser
The way of implementing a flip option follows the existing panel-samsung-s6e8aa0.c [1][2][3]. The value to flip the screen is taken from a downstream kernel file of a similar but older panel [4]. The mipi clock [5] for the new panel samsung-s6e88a0-ams427ap24 matches 461 MHz and a hardware read-out of the 0xcb values corresponds to revision R01 of that older panel [6]. Although for samsung-s6e88a0-ams427ap24 that's in non-flipped state while in this older driver it seems to be the other way around. Further up there is a hint [7] basically saying for revision R01 to change the first word of the 0xcb command from 0x06 to 0x0e, which is actually setting BIT(3) of that word. This causes a horizontal flip. [1] https://github.com/torvalds/linux/blob/v6.11/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c#L103 [2] https://github.com/torvalds/linux/blob/v6.11/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c#L207-L211 [3] https://github.com/torvalds/linux/blob/v6.11/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c#L954-L974 [4] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c [5] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c#L2027-L2028 [6] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c#L137-L151 [7] https://github.com/LineageOS/android_kernel_samsung_msm8930-common/blob/lineage-15.1/drivers/video/msm/mipi_samsung_oled_video_qhd_pt-8930.c#L66-L74 Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/1491f275e9956b2da1f1e2580abd54f4e459c7d2.1730070570.git.jahau@rocketmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1491f275e9956b2da1f1e2580abd54f4e459c7d2.1730070570.git.jahau@rocketmail.com
2024-10-31drm/panel: samsung-s6e88a0-ams427ap24: Add brightness controlJakob Hauser
The tables for brightness to candela, aid and elvss were taken from downstream kernel file "dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi" [1][2][3]. The gamma table gets generated in "ss_dsi_smart_dimming_S6E88A0_AMS427AP24.c" [4] with hard-coded starting values. The function smart_dimming_init() [5] goes through the v{*}_adjustments, generate_gray_scale and gamma_init procedure. Instead of calculating it manually, it's easier to compile a custom downstream kernel with SMART_DIMMING_DEBUG enabled and read out dmesg early at boot. Selection of the values for aid and elvss are again according to downstream file "dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi" [6][7]. The set of write commands is guided by downstream file "ss_dsi_panel_common.c" [8] followed by "ss_dsi_panel_S6E88A0_AMS427AP24.c" [9]. The dsi mode flag MIPI_DSI_MODE_VIDEO_NO_HFP prevents screen flickering while changing the brightness. [1] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi#L341-L397 [2] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi#L214-L254 [3] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi#L301-L320 [4] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/ss_dsi_smart_dimming_S6E88A0_AMS427AP24.c [5] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/ss_dsi_smart_dimming_S6E88A0_AMS427AP24.c#L1816-L1900 [6] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi#L256-L268 [7] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi#L322-L334 [8] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/ss_dsi_panel_common.c#L1389-L1517 [9] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/ss_dsi_panel_S6E88A0_AMS427AP24.c#L666-L678 Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/30c154954a4e0f75d90f6ef6f393a5ba8b3ffea9.1730070570.git.jahau@rocketmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/30c154954a4e0f75d90f6ef6f393a5ba8b3ffea9.1730070570.git.jahau@rocketmail.com
2024-10-31drm/panel: samsung-s6e88a0-ams427ap24: Add initial driverJakob Hauser
This initial part of the panel driver was mostly generated by the "linux-mdss-dsi-panel-driver-generator" tool [1], reading downstream Android kernel file "dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi" [2]. On top of the generic output of the tool, there were a couple of changes applied: - Added mipi_dsi_dcs_set_display_on() to function s6e88a0_ams427ap24_on(), otherwise the display does not show up. - In functions s6e88a0_ams427ap24_on() and s6e88a0_ams427ap24_off() changed DSI commands to multi context and used "accum_err" returns. - In functions s6e88a0_ams427ap24_on() and s6e88a0_ams427ap24_off() replaced msleep() by mipi_dsi_msleep(). - The function s6e88a0_ams427ap24_get_modes() was changed to make use of drm_connector_helper_get_modes_fixed(). This also required to include drm/drm_probe_helper.h. - In function s6e88a0_ams427ap24_probe() registring the regulators was changed to devm_regulator_bulk_get_const(). This required to change supplies in struct s6e88a0_ams427ap24 to a pointer. - Removed bool "prepared" from struct s6e88a0_ams427ap24 and according parts in functions s6e88a0_ams427ap24_prepare() and s6e88a0_ams427ap24_unprepare(). - Removed include <linux/of.h>, it's not needed. - Added comments to the mipi_dsi_dcs_write_seq_multi() lines in function s6e88a0_ams427ap24_on(). [1] https://github.com/msm8916-mainline/linux-mdss-dsi-panel-driver-generator [2] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/drivers/video/msm/mdss/samsung/S6E88A0_AMS427AP24/dsi_panel_S6E88A0_AMS427AP24_qhd_octa_video.dtsi Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/d92ef0036b66520bb6d1ec908165e776cf30c303.1730070570.git.jahau@rocketmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/d92ef0036b66520bb6d1ec908165e776cf30c303.1730070570.git.jahau@rocketmail.com
2024-10-31drm/tests: hdmi: Fix memory leaks in drm_display_mode_from_cea_vic()Jinjie Ruan
modprobe drm_hdmi_state_helper_test and then rmmod it, the following memory leak occurs. The `mode` allocated in drm_mode_duplicate() called by drm_display_mode_from_cea_vic() is not freed, which cause the memory leak: unreferenced object 0xffffff80ccd18100 (size 128): comm "kunit_try_catch", pid 1851, jiffies 4295059695 hex dump (first 32 bytes): 57 62 00 00 80 02 90 02 f0 02 20 03 00 00 e0 01 Wb........ ..... ea 01 ec 01 0d 02 00 00 0a 00 00 00 00 00 00 00 ................ backtrace (crc c2f1aa95): [<000000000f10b11b>] kmemleak_alloc+0x34/0x40 [<000000001cd4cf73>] __kmalloc_cache_noprof+0x26c/0x2f4 [<00000000f1f3cffa>] drm_mode_duplicate+0x44/0x19c [<000000008cbeef13>] drm_display_mode_from_cea_vic+0x88/0x98 [<0000000019daaacf>] 0xffffffedc11ae69c [<000000000aad0f85>] kunit_try_run_case+0x13c/0x3ac [<00000000a9210bac>] kunit_generic_run_threadfn_adapter+0x80/0xec [<000000000a0b2e9e>] kthread+0x2e8/0x374 [<00000000bd668858>] ret_from_fork+0x10/0x20 ...... Free `mode` by using drm_kunit_display_mode_from_cea_vic() to fix it. Cc: stable@vger.kernel.org Fixes: 4af70f19e559 ("drm/tests: Add RGB Quantization tests") Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241030023504.530425-4-ruanjinjie@huawei.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-10-31drm/connector: hdmi: Fix memory leak in drm_display_mode_from_cea_vic()Jinjie Ruan
modprobe drm_connector_test and then rmmod drm_connector_test, the following memory leak occurs. The `mode` allocated in drm_mode_duplicate() called by drm_display_mode_from_cea_vic() is not freed, which cause the memory leak: unreferenced object 0xffffff80cb0ee400 (size 128): comm "kunit_try_catch", pid 1948, jiffies 4294950339 hex dump (first 32 bytes): 14 44 02 00 80 07 d8 07 04 08 98 08 00 00 38 04 .D............8. 3c 04 41 04 65 04 00 00 05 00 00 00 00 00 00 00 <.A.e........... backtrace (crc 90e9585c): [<00000000ec42e3d7>] kmemleak_alloc+0x34/0x40 [<00000000d0ef055a>] __kmalloc_cache_noprof+0x26c/0x2f4 [<00000000c2062161>] drm_mode_duplicate+0x44/0x19c [<00000000f96c74aa>] drm_display_mode_from_cea_vic+0x88/0x98 [<00000000d8f2c8b4>] 0xffffffdc982a4868 [<000000005d164dbc>] kunit_try_run_case+0x13c/0x3ac [<000000006fb23398>] kunit_generic_run_threadfn_adapter+0x80/0xec [<000000006ea56ca0>] kthread+0x2e8/0x374 [<000000000676063f>] ret_from_fork+0x10/0x20 ...... Free `mode` by using drm_kunit_display_mode_from_cea_vic() to fix it. Cc: stable@vger.kernel.org Fixes: abb6f74973e2 ("drm/tests: Add HDMI TDMS character rate tests") Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241030023504.530425-3-ruanjinjie@huawei.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-10-31drm/tests: helpers: Add helper for drm_display_mode_from_cea_vic()Jinjie Ruan
As Maxime suggested, add a new helper drm_kunit_display_mode_from_cea_vic(), it can replace the direct call of drm_display_mode_from_cea_vic(), and it will help solving the `mode` memory leaks. Acked-by: Maxime Ripard <mripard@kernel.org> Suggested-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241030023504.530425-2-ruanjinjie@huawei.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-10-30net: ethernet: mtk_wed: fix path of MT7988 WO firmwareDaniel Golle
linux-firmware commit 808cba84 ("mtk_wed: add firmware for mt7988 Wireless Ethernet Dispatcher") added mt7988_wo_{0,1}.bin in the 'mediatek/mt7988' directory while driver current expects the files in the 'mediatek' directory. Change path in the driver header now that the firmware has been added. Fixes: e2f64db13aa1 ("net: ethernet: mtk_wed: introduce WED support for MT7988") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patch.msgid.link/Zxz0GWTR5X5LdWPe@pidgin.makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-30mlxsw: spectrum_ipip: Fix memory leak when changing remote IPv6 addressIdo Schimmel
The device stores IPv6 addresses that are used for encapsulation in linear memory that is managed by the driver. Changing the remote address of an ip6gre net device never worked properly, but since cited commit the following reproducer [1] would result in a warning [2] and a memory leak [3]. The problem is that the new remote address is never added by the driver to its hash table (and therefore the device) and the old address is never removed from it. Fix by programming the new address when the configuration of the ip6gre net device changes and removing the old one. If the address did not change, then the above would result in increasing the reference count of the address and then decreasing it. [1] # ip link add name bla up type ip6gre local 2001:db8:1::1 remote 2001:db8:2::1 tos inherit ttl inherit # ip link set dev bla type ip6gre remote 2001:db8:3::1 # ip link del dev bla # devlink dev reload pci/0000:01:00.0 [2] WARNING: CPU: 0 PID: 1682 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3002 mlxsw_sp_ipv6_addr_put+0x140/0x1d0 Modules linked in: CPU: 0 UID: 0 PID: 1682 Comm: ip Not tainted 6.12.0-rc3-custom-g86b5b55bc835 #151 Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023 RIP: 0010:mlxsw_sp_ipv6_addr_put+0x140/0x1d0 [...] Call Trace: <TASK> mlxsw_sp_router_netdevice_event+0x55f/0x1240 notifier_call_chain+0x5a/0xd0 call_netdevice_notifiers_info+0x39/0x90 unregister_netdevice_many_notify+0x63e/0x9d0 rtnl_dellink+0x16b/0x3a0 rtnetlink_rcv_msg+0x142/0x3f0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x242/0x390 netlink_sendmsg+0x1de/0x420 ____sys_sendmsg+0x2bd/0x320 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xd0 do_syscall_64+0x9e/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f [3] unreferenced object 0xffff898081f597a0 (size 32): comm "ip", pid 1626, jiffies 4294719324 hex dump (first 32 bytes): 20 01 0d b8 00 02 00 00 00 00 00 00 00 00 00 01 ............... 21 49 61 83 80 89 ff ff 00 00 00 00 01 00 00 00 !Ia............. backtrace (crc fd9be911): [<00000000df89c55d>] __kmalloc_cache_noprof+0x1da/0x260 [<00000000ff2a1ddb>] mlxsw_sp_ipv6_addr_kvdl_index_get+0x281/0x340 [<000000009ddd445d>] mlxsw_sp_router_netdevice_event+0x47b/0x1240 [<00000000743e7757>] notifier_call_chain+0x5a/0xd0 [<000000007c7b9e13>] call_netdevice_notifiers_info+0x39/0x90 [<000000002509645d>] register_netdevice+0x5f7/0x7a0 [<00000000c2e7d2a9>] ip6gre_newlink_common.isra.0+0x65/0x130 [<0000000087cd6d8d>] ip6gre_newlink+0x72/0x120 [<000000004df7c7cc>] rtnl_newlink+0x471/0xa20 [<0000000057ed632a>] rtnetlink_rcv_msg+0x142/0x3f0 [<0000000032e0d5b5>] netlink_rcv_skb+0x50/0x100 [<00000000908bca63>] netlink_unicast+0x242/0x390 [<00000000cdbe1c87>] netlink_sendmsg+0x1de/0x420 [<0000000011db153e>] ____sys_sendmsg+0x2bd/0x320 [<000000003b6d53eb>] ___sys_sendmsg+0x9a/0xe0 [<00000000cae27c62>] __sys_sendmsg+0x7a/0xd0 Fixes: cf42911523e0 ("mlxsw: spectrum_ipip: Use common hash table for IPv6 address mapping") Reported-by: Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/e91012edc5a6cb9df37b78fd377f669381facfcb.1729866134.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-30mlxsw: pci: Sync Rx buffers for deviceAmit Cohen
Non-coherent architectures, like ARM, may require invalidating caches before the device can use the DMA mapped memory, which means that before posting pages to device, drivers should sync the memory for device. Sync for device can be configured as page pool responsibility. Set the relevant flag and define max_len for sync. Cc: Jiri Pirko <jiri@resnulli.us> Fixes: b5b60bb491b2 ("mlxsw: pci: Use page pool for Rx buffers allocation") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/92e01f05c4f506a4f0a9b39c10175dcc01994910.1729866134.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-30mlxsw: pci: Sync Rx buffers for CPUAmit Cohen
When Rx packet is received, drivers should sync the pages for CPU, to ensure the CPU reads the data written by the device and not stale data from its cache. Add the missing sync call in Rx path, sync the actual length of data for each fragment. Cc: Jiri Pirko <jiri@resnulli.us> Fixes: b5b60bb491b2 ("mlxsw: pci: Use page pool for Rx buffers allocation") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/461486fac91755ca4e04c2068c102250026dcd0b.1729866134.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-30mlxsw: spectrum_ptp: Add missing verification before pushing Tx headerAmit Cohen
Tx header should be pushed for each packet which is transmitted via Spectrum ASICs. The cited commit moved the call to skb_cow_head() from mlxsw_sp_port_xmit() to functions which handle Tx header. In case that mlxsw_sp->ptp_ops->txhdr_construct() is used to handle Tx header, and txhdr_construct() is mlxsw_sp_ptp_txhdr_construct(), there is no call for skb_cow_head() before pushing Tx header size to SKB. This flow is relevant for Spectrum-1 and Spectrum-4, for PTP packets. Add the missing call to skb_cow_head() to make sure that there is both enough room to push the Tx header and that the SKB header is not cloned and can be modified. An additional set will be sent to net-next to centralize the handling of the Tx header by pushing it to every packet just before transmission. Cc: Richard Cochran <richardcochran@gmail.com> Fixes: 24157bc69f45 ("mlxsw: Send PTP packets as data packets to overcome a limitation") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/5145780b07ebbb5d3b3570f311254a3a2d554a44.1729866134.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-30Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two small fixes, both in drivers (ufs and scsi_debug)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Fix another deadlock during RTC update scsi: scsi_debug: Fix do_device_access() handling of unexpected SG copy length
2024-10-30drm/panthor: Report group as timedout when we fail to properly suspendBoris Brezillon
If we don't do that, the group is considered usable by userspace, but all further GROUP_SUBMIT will fail with -EINVAL. Changes in v3: - Add R-bs Changes in v2: - New patch Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block") Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241029152912.270346-3-boris.brezillon@collabora.com
2024-10-30drm/panthor: Fail job creation when the group is deadBoris Brezillon
Userspace can use GROUP_SUBMIT errors as a trigger to check the group state and recreate the group if it became unusable. Make sure we report an error when the group became unusable. Changes in v3: - None Changes in v2: - Add R-bs Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block") Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241029152912.270346-2-boris.brezillon@collabora.com
2024-10-30drm/panthor: Fix firmware initialization on systems with a page size > 4kBoris Brezillon
The system and GPU MMU page size might differ, which becomes a problem for FW sections that need to be mapped at explicit addresses since our PAGE_SIZE alignment might cover a VA range that's expected to be used for another section. Make sure we never map more than we need. Changes in v3: - Add R-bs Changes in v2: - Plan for per-VM page sizes so the MCU VM and user VM can have different pages sizes Fixes: 2718d91816ee ("drm/panthor: Add the FW logical block") Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241030150231.768949-1-boris.brezillon@collabora.com
2024-10-30nvme: re-fix error-handling for io_uring nvme-passthroughKeith Busch
This was previously fixed with commit 1147dd0503564fa0e0348 ("nvme: fix error-handling for io_uring nvme-passthrough"), but the change was mistakenly undone in a later commit. Fixes: d6aacee9255e7f ("nvme: use bio_integrity_map_user") Cc: stable@vger.kernel.org Reported-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anuj Gupta <anuj20.g@samsung.com> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-10-30nvmet-auth: assign dh_key to NULL after kfree_sensitiveVitaliy Shevtsov
ctrl->dh_key might be used across multiple calls to nvmet_setup_dhgroup() for the same controller. So it's better to nullify it after release on error path in order to avoid double free later in nvmet_destroy_auth(). Found by Linux Verification Center (linuxtesting.org) with Svace. Fixes: 7a277c37d352 ("nvmet-auth: Diffie-Hellman key exchange support") Cc: stable@vger.kernel.org Signed-off-by: Vitaliy Shevtsov <v.shevtsov@maxima.ru> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-10-30nvme: module parameter to disable pi with offsetsKeith Busch
A recent commit enables integrity checks for formats the previous kernel versions registered with the "nop" integrity profile. This means namespaces using that format become unreadable when upgrading the kernel past that commit. Introduce a module parameter to restore the "nop" integrity profile so that storage can be readable once again. This could be a boot device, so the setting needs to happen at module load time. Fixes: 921e81db524d17 ("nvme: allow integrity when PI is not in first bytes") Reported-by: David Wei <dw@davidwei.uk> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-10-30drm/v3d: Drop allocation of object without mountpointMatthias Brugger
Function drm_gem_shmem_create_with_mnt() creates an object without using the mountpoint if gemfs is NULL. Drop the else branch calling drm_gem_shmem_create(). Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241029-v3d-v2-1-c0d3dd328d1b@gmail.com
2024-10-30drm: xlnx: zynqmp_dpsub: fix hotplug detectionSteffen Dirkwinkel
drm_kms_helper_poll_init needs to be called after zynqmp_dpsub_kms_init. zynqmp_dpsub_kms_init creates the connector and without it we don't enable hotplug detection. Fixes: eb2d64bfcc17 ("drm: xlnx: zynqmp_dpsub: Report HPD through the bridge") Cc: stable@vger.kernel.org Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241028134218.54727-1-lists@steffen.cc
2024-10-30drm: xlnx: zynqmp_disp: layer may be null while releasingSteffen Dirkwinkel
layer->info can be null if we have an error on the first layer in zynqmp_disp_create_layers Fixes: 1836fd5ed98d ("drm: xlnx: zynqmp_dpsub: Minimize usage of global flag") Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241028133941.54264-1-lists@steffen.cc
2024-10-30drm: zynqmp_dp: Add debugfs interface for compliance testingSean Anderson
Add a debugfs interface for exercising the various test modes supported by the DisplayPort controller. This allows performing compliance testing, or performing signal integrity measurements on a failing link. At the moment, we do not support sink-driven link quality testing, although such support would be fairly easy to add. Additionally, add some debugfs files for ignoring AUX errors and HPD events, as this can allow testing with equipment that cannot emulate a DPRX. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> [Tomi: fixed a few minor formatting issues] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-9-sean.anderson@linux.dev
2024-10-30drm: zynqmp_dp: Take dp->lock in zynqmp_dp_hpd_work_funcSean Anderson
Add a non-locking version of zynqmp_dp_bridge_detect and use it in zynqmp_dp_hpd_work_func so we can take the lock explicitly. This will make it easier to check for hpd_ignore when we add debugfs support. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-8-sean.anderson@linux.dev
2024-10-30drm: zynqmp_dp: Split off several helper functionsSean Anderson
In preparation for supporting compliance testing, split off several helper functions. No functional change intended. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-7-sean.anderson@linux.dev
2024-10-30drm: zynqmp_dp: Use AUX IRQs instead of pollingSean Anderson
Instead of polling the status register for the AUX status, just enable the IRQs and signal a completion. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-6-sean.anderson@linux.dev
2024-10-30drm: zynqmp_dp: Convert to a hard IRQSean Anderson
Now that all of the sleeping work is done outside of the IRQ, we can convert it to a hard IRQ. Shared IRQs may be triggered even after calling disable_irq, so use free_irq instead which removes our callback altogether. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-5-sean.anderson@linux.dev
2024-10-30drm: zynqmp_dp: Don't retrain the link in our IRQSean Anderson
Retraining the link can take a while, and might involve waiting for DPCD reads/writes to complete. In preparation for unthreading the IRQ handler, move this into its own work function. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-4-sean.anderson@linux.dev
2024-10-30drm: zynqmp_dp: Add lockingSean Anderson
Add some locking to prevent the IRQ/workers/bridge API calls from stepping on each other's toes. This lock protects: - Non-atomic registers configuring the link. That is, everything but the IRQ registers (since these are accessed in an atomic fashion), and the DP AUX registers (since these don't affect the link). We also access AUX while holding this lock, so it would be very tricky to support. - Link configuration. This is effectively everything in zynqmp_dp which isn't read-only after probe time. So from next_bridge onward. This lock is designed to protect configuration changes so we don't have to do anything tricky. Configuration should never be in the hot path, so I'm not worried about performance. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-3-sean.anderson@linux.dev
2024-10-30drm: zynqmp_kms: Unplug DRM device before removalSean Anderson
Prevent userspace accesses to the DRM device from causing use-after-frees by unplugging the device before we remove it. This causes any further userspace accesses to result in an error without further calls into this driver's internals. Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem") Closes: https://lore.kernel.org/dri-devel/4d8f4c9b-2efb-4774-9a37-2f257f79b2c9@linux.dev/ Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240809193600.3360015-2-sean.anderson@linux.dev
2024-10-30accel/ivpu: Move secondary preemption buffer allocation to DMA rangeKarol Wachowski
Secondary preemption buffer is accessible by NPU's DMA and can be allocated with addresses above 4 GB. Move secondary preemption buffer allocation from SHAVE range which is much smaller (2GB) to DMA range. This allows to allocate more command queues with corresponding preemption buffers without running out of address range. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-12-jacek.lawrynowicz@linux.intel.com
2024-10-30accel/ivpu: Increase DMA address rangeKarol Wachowski
Increase DMA address range to: * 128 GB on 37xx (due to MMU limitations) * 256 GB on other generations Merge User and DMA ranges on 40xx and above as it is possible to access whole 256 GBs from both FW and DMA. Increase User range on 37xx from 255MB to 511MB to allow loading very large models. Do not set global_alias_pio_base/size on other generations than 37xx as it's only used on 37xx anyway. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-11-jacek.lawrynowicz@linux.intel.com
2024-10-30accel/ivpu: Add debug Kconfig optionMaciej Falkowski
Add CONFIG_DRM_ACCEL_IVPU_DEBUG option that: - Adds -DDEBUG that enables printk regardless of the kernel config - Enables unsafe module params (that are now disabled by default) Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-10-jacek.lawrynowicz@linux.intel.com
2024-10-30accel/ivpu: Don't allocate preemption buffers when MIP is disabledKarol Wachowski
Do not allocate preemption buffers when Mid Inference Preemption (MIP) is disabled through test mode. Rename IVPU_TEST_MODE_PREEMPTION_DISABLE to IVPU_TEST_MODE_MIP_DISABLE to better describe that this test mode only disables MIP - job level preemption will still occur. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-9-jacek.lawrynowicz@linux.intel.com
2024-10-30accel/ivpu: Make command queue ID allocated on XArrayKarol Wachowski
Use XArray for dynamic command queue ID allocations instead of fixed ones. This is required by upcoming changes to UAPI that will allow to manage command queues by user space instead of having predefined number of queues in a context. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-8-jacek.lawrynowicz@linux.intel.com
2024-10-30accel/ivpu: Use xa_alloc_cyclic() instead of custom functionKarol Wachowski
Remove custom ivpu_id_alloc() wrapper used for ID allocations and replace it with standard xa_alloc_cyclic() API. The idea behind ivpu_id_alloc() was to have monotonic IDs, so the driver is easier to debug because same IDs are not reused all over. The same can be achieved just by using appropriate Linux API. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-7-jacek.lawrynowicz@linux.intel.com
2024-10-30accel/ivpu: Unmap partially mapped BOs in case of errorsKarol Wachowski
Ensure that all buffers that were created only partially through allocated scatter-gather table are unmapped from MMU600 in case of errors. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-6-jacek.lawrynowicz@linux.intel.com
2024-10-30accel/ivpu: Clear CDTAB entry in case of failureKarol Wachowski
Don't leave a context descriptor in case CFGI_ALL flush fails. Mark it as invalid (by clearing valid bit) so nothing is left in partially-initialized state. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-5-jacek.lawrynowicz@linux.intel.com
2024-10-30accel/ivpu: Remove copy engine supportAndrzej Kacprowski
Copy engine was deprecated by the FW and is no longer supported. Compute engine includes all copy engine functionality and should be used instead. This change does not affect user space as the copy engine was never used outside of a couple of tests. Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-4-jacek.lawrynowicz@linux.intel.com
2024-10-30accel/ivpu: Defer MMU root page table allocationKarol Wachowski
Defer root page table allocation and unify context init/fini functions. Move allocation of the root page table from the file_priv_open function to perform a lazy allocation approach during ivpu_bo_pin(). By doing so, we avoid the overhead of allocating page tables for simple operations like GET_PARAM that do not require them. Additionally, the MMU context descriptor table initialization has been moved to the ivpu_mmu_context_map_page function. This change streamlines the process and ensures that the descriptor table is only initialized when it is actually needed. Refactor init/fini functions to remove redundant code and make the context management more straightforward. Overall, these changes lead to a reduction in the time taken by the file descriptor open operation, as the costly root page table allocation is now avoided for operations that do not require it. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-3-jacek.lawrynowicz@linux.intel.com
2024-10-30accel/ivpu: Do not fail when more than 1 tile is fusedKarol Wachowski
Allow TILE_FUSE register to disable more than 1 tile. The driver should not prevent such configurations from being functional. Signed-off-by: Karol Wachowski <karol.wachowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-2-jacek.lawrynowicz@linux.intel.com
2024-10-30accel/ivpu: Fix NOC firewall interrupt handlingAndrzej Kacprowski
The NOC firewall interrupt means that the HW prevented unauthorized access to a protected resource, so there is no need to trigger device reset in such case. To facilitate security testing add firewall_irq_counter debugfs file that tracks firewall interrupts. Fixes: 8a27ad81f7d3 ("accel/ivpu: Split IP and buttress code") Cc: stable@vger.kernel.org # v6.11+ Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241017144958.79327-1-jacek.lawrynowicz@linux.intel.com
2024-10-29Merge tag 'tpmdd-next-6.12-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm fix from Jarkko Sakkinen: "Address a significant boot-time delay issue" Link: https://bugzilla.kernel.org/show_bug.cgi?id=219229 * tag 'tpmdd-next-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm: Lazily flush the auth session tpm: Rollback tpm2_load_null() tpm: Return tpm2_sessions_init() when null key creation fails
2024-10-29Merge tag 'wireless-2024-10-29' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== wireless fixes for v6.12-rc6 Another set of fixes, mostly iwlwifi: * fix infinite loop in 6 GHz scan if more than 255 colocated APs were reported * revert removal of retry loops for now to work around issues with firmware initialization on some devices/platforms * fix SAR table issues with some BIOSes * fix race in suspend/debug collection * fix memory leak in fw recovery * fix link ID leak in AP mode for older devices * fix sending TX power constraints * fix link handling in FW restart And also the stack: * fix setting TX power from userspace with the new chanctx emulation code for old-style drivers * fix a memory corruption bug due to structure embedding * fix CQM configuration double-free when moving between net namespaces * tag 'wireless-2024-10-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: ieee80211_i: Fix memory corruption bug in struct ieee80211_chanctx wifi: iwlwifi: mvm: fix 6 GHz scan construction wifi: cfg80211: clear wdev->cqm_config pointer on free mac80211: fix user-power when emulating chanctx Revert "wifi: iwlwifi: remove retry loops in start" wifi: iwlwifi: mvm: don't add default link in fw restart flow wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd() wifi: iwlwifi: mvm: SAR table alignment wifi: iwlwifi: mvm: Use the sync timepoint API in suspend wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd wifi: iwlwifi: mvm: don't leak a link on AP removal ==================== Link: https://patch.msgid.link/20241029093926.13750-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-29drm/nouveau/gr/gf100: Fix missing unlock in gf100_gr_chan_new()Li Huafei
When the call to gf100_grctx_generate() fails, unlock gr->fecs.mutex before returning the error. Fixes smatch warning: drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c:480 gf100_gr_chan_new() warn: inconsistent returns '&gr->fecs.mutex'. Fixes: ca081fff6ecc ("drm/nouveau/gr/gf100-: generate golden context during first object alloc") Signed-off-by: Li Huafei <lihuafei1@huawei.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241026173844.2392679-1-lihuafei1@huawei.com
2024-10-29net: usb: qmi_wwan: add Quectel RG650VBenoît Monin
Add support for Quectel RG650V which is based on Qualcomm SDX65 chip. The composition is DIAG / NMEA / AT / AT / QMI. T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2c7c ProdID=0122 Rev=05.15 S: Manufacturer=Quectel S: Product=RG650V-EU S: SerialNumber=xxxxxxx C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=9ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=9ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=9ms Signed-off-by: Benoît Monin <benoit.monin@gmx.fr> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241024151113.53203-1-benoit.monin@gmx.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-29netdevsim: Add trailing zero to terminate the string in ↵Zichen Xie
nsim_nexthop_bucket_activity_write() This was found by a static analyzer. We should not forget the trailing zero after copy_from_user() if we will further do some string operations, sscanf() in this case. Adding a trailing zero will ensure that the function performs properly. Fixes: c6385c0b67c5 ("netdevsim: Allow reporting activity on nexthop buckets") Signed-off-by: Zichen Xie <zichenxie0106@gmail.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20241022171907.8606-1-zichenxie0106@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-26 07:32:13 +0000