summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-10-09drm/i915: Disable compression tricks on JSLVille Syrjälä
Bspec asks us to disable some compression trick on JSL. While the bspec description is pretty vague it looks like this is some extra trick for 10bpc+ CCS which presumably the ICL derived display engine doesn't support. Note that we aren't currently exposing 10bpc CCS scanout support, but once that gets added this presumably becomes an issue. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240918144445.5716-3-ville.syrjala@linux.intel.com Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
2024-10-09HID: amd_sfh: Switch to device-managed dmam_alloc_coherent()Basavaraj Natikar
Using the device-managed version allows to simplify clean-up in probe() error path. Additionally, this device-managed ensures proper cleanup, which helps to resolve memory errors, page faults, btrfs going read-only, and btrfs disk corruption. Fixes: 4b2c53d93a4b ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)") Tested-by: Chris Hixon <linux-kernel-bugs@hixontech.com> Tested-by: Richard <hobbes1069@gmail.com> Tested-by: Skyler <skpu@pm.me> Reported-by: Chris Hixon <linux-kernel-bugs@hixontech.com> Closes: https://lore.kernel.org/all/3b129b1f-8636-456a-80b4-0f6cce0eef63@hixontech.com/ Link: https://bugzilla.kernel.org/show_bug.cgi?id=219331 Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-10-09ata: libata: avoid superfluous disk spin down + spin up during hibernationNiklas Cassel
A user reported that commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop") introduced a spin down + immediate spin up of the disk both when entering and when resuming from hibernation. This behavior was not there before, and causes an increased latency both when entering and when resuming from hibernation. Hibernation is done by three consecutive PM events, in the following order: 1) PM_EVENT_FREEZE 2) PM_EVENT_THAW 3) PM_EVENT_HIBERNATE Commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop") modified ata_eh_handle_port_suspend() to call ata_dev_power_set_standby() (which spins down the disk), for both event PM_EVENT_FREEZE and event PM_EVENT_HIBERNATE. Documentation/driver-api/pm/devices.rst, section "Entering Hibernation", explicitly mentions that PM_EVENT_FREEZE does not have to be put the device in a low-power state, and actually recommends not doing so. Thus, let's not spin down the disk on PM_EVENT_FREEZE. (The disk will instead be spun down during the subsequent PM_EVENT_HIBERNATE event.) This way, PM_EVENT_FREEZE will behave as it did before commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop"), while PM_EVENT_HIBERNATE will continue to spin down the disk. This will avoid the superfluous spin down + spin up when entering and resuming from hibernation, while still making sure that the disk is spun down before actually entering hibernation. Cc: stable@vger.kernel.org # v6.6+ Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop") Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20241008135843.1266244-2-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-10-09drm/xe/xe3: Add initial set of workaroundsGustavo Sousa
Implement the initial set of workarounds for Xe3 IPs. Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241008204626.55802-2-matthew.s.atwood@intel.com
2024-10-09drm/writeback: remove pointless enable_signaling implementationChristian König
Just returning true here is a no-op, remove the optional callback. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240911085903.1496-4-christian.koenig@amd.com
2024-10-09dma-buf/sw_sync: remove pointless enable_signaling implementationChristian König
Just returning true here is a no-op, remove the optional callback. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240911085903.1496-3-christian.koenig@amd.com
2024-10-09dma-buf: add WARN_ON() illegal dma-fence signalingChristian König
Calling the signaling a NULL fence is obviously a coding error in a driver. Those functions unfortunately just returned silently without raising a warning. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240911085903.1496-2-christian.koenig@amd.com
2024-10-09net: amd: mvme147: Fix probe banner messageDaniel Palmer
Currently this driver prints this line with what looks like a rogue format specifier when the device is probed: [ 2.840000] eth%d: MVME147 at 0xfffe1800, irq 12, Hardware Address xx:xx:xx:xx:xx:xx Change the printk() for netdev_info() and move it after the registration has completed so it prints out the name of the interface properly. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-10-09net: phy: realtek: Fix MMD access on RTL8126A-integrated PHYHeiner Kallweit
All MMD reads return 0 for the RTL8126A-integrated PHY. Therefore phylib assumes it doesn't support EEE, what results in higher power consumption, and a significantly higher chip temperature in my case. To fix this split out the PHY driver for the RTL8126A-integrated PHY and set the read_mmd/write_mmd callbacks to read from vendor-specific registers. Fixes: 5befa3728b85 ("net: phy: realtek: add support for RTL8126A-integrated 5Gbps PHY") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-10-09drm/ttm: Move pinned objects off LRU lists when pinningThomas Hellström
The ttm_bo_pin() and ttm_bo_unpin() functions weren't moving their resources off the LRU list to the unevictable list. Make sure that happens so that pinned objects don't accidently linger on the LRU lists, and also make sure to move them back once they are unpinned. v2: - Removing from a bulk move must be done with the pin-count still zero. v3: - ttm_resource_move_to_lru_tail must be done after pinning with a non- NULL resource (Intel CI). v6: - Use a TAB instead of space (checkpatch.pl error). Cc: Christian König <christian.koenig@amd.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <dri-devel@lists.freedesktop.org> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240911121859.85387-3-thomas.hellstrom@linux.intel.com
2024-10-09drm/ttm: Move swapped objects off the manager's LRU listThomas Hellström
Resources of swapped objects remains on the TTM_PL_SYSTEM manager's LRU list, which is bad for the LRU walk efficiency. Rename the device-wide "pinned" list to "unevictable" and move also resources of swapped-out objects to that list. An alternative would be to create an "UNEVICTABLE" priority to be able to keep the pinned- and swapped objects on their respective manager's LRU without affecting the LRU walk efficiency. v2: - Remove a bogus WARN_ON (Christian König) - Update ttm_resource_[add|del] bulk move (Christian König) - Fix TTM KUNIT tests (Intel CI) v3: - Check for non-NULL bo->resource in ttm_bo_populate(). v4: - Don't move to LRU tail during swapout until the resource is properly swapped or there was a swapout failure. (Intel Ci) - Add a newline after checkpatch check. v5: - Introduce ttm_resource_is_swapped() to avoid a corner-case where a newly created resource was considered swapped. (Intel CI) v6: - Move an assert. Cc: Christian König <christian.koenig@amd.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <dri-devel@lists.freedesktop.org> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240911121859.85387-2-thomas.hellstrom@linux.intel.com
2024-10-09net: ti: icssg-prueth: Fix race condition for VLAN table accessMD Danish Anwar
The VLAN table is a shared memory between the two ports/slices in a ICSSG cluster and this may lead to race condition when the common code paths for both ports are executed in different CPUs. Fix the race condition access by locking the shared memory access Fixes: 487f7323f39a ("net: ti: icssg-prueth: Add helper functions to configure FDB") Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-10-09drm/vc4: Correct generation check in vc4_hvs_lut_loadDave Stevenson
Commit 24c5ed3ddf27 ("drm/vc4: Introduce generation number enum") incorrectly swapped a check of hvs->vc4->is_vc5 to hvs->vc4->gen == VC4_GEN_4 in vc4_hvs_lut_load, hence breaking loading the gamma look up table on Pi0-3. Correct that conditional. Fixes: 24c5ed3ddf27 ("drm/vc4: Introduce generation number enum") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/dri-devel/37051126-3921-4afe-a936-5f828bff5752@samsung.com/ Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241008-drm-vc4-fixes-v1-3-9d0396ca9f42@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-10-09drm/vc4: Match drm_dev_enter and exit calls in vc4_hvs_atomic_flushDave Stevenson
Commit 92c17d16476c ("drm/vc4: hvs: Ignore atomic_flush if we're disabled") added a path which returned early without having called drm_dev_exit. Ensure all paths call drm_dev_exit. Fixes: 92c17d16476c ("drm/vc4: hvs: Ignore atomic_flush if we're disabled") Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241008-drm-vc4-fixes-v1-2-9d0396ca9f42@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-10-09drm/vc4: Match drm_dev_enter and exit calls in vc4_hvs_lut_loadDave Stevenson
Commit 52efe364d196 ("drm/vc4: hvs: Don't write gamma luts on 2711") added a return path to vc4_hvs_lut_load that had called drm_dev_enter, but not drm_dev_exit. Ensure we call drm_dev_exit. Fixes: 52efe364d196 ("drm/vc4: hvs: Don't write gamma luts on 2711") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/dri-devel/37051126-3921-4afe-a936-5f828bff5752@samsung.com/ Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241008-drm-vc4-fixes-v1-1-9d0396ca9f42@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-10-09drm/vc4: Run default client setup for all variants.Dave Stevenson
Commit 45903624e9fc ("drm/vc4: Run DRM default client setup") only added DRM_FBDEV_DMA_DRIVER_OPS for the vc4 (Pi0-3) driver definition, which caused an issue on vc5 (Pi4) as there was no fbdev_probe function defined. Fixes: 45903624e9fc ("drm/vc4: Run DRM default client setup") Reviewed-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20241002-vc4_fbdev_fix-v1-1-8737bd11b147@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-10-09drm/xe/tests: Fix the shrinker test compiler warnings.Thomas Hellström
The xe_bo_shrink_kunit test has an uninitialized value and illegal integer size conversions on 32-bit. Fix. v2: - Use div64_u64 to ensure the u64 division compiles everywhere. (Matt Auld) Reported-by: Nathan Chancellor <nathan@kernel.org> Closes: https://lore.kernel.org/20240913195649.GA61514@thelio-3990X/ Fixes: 5a90b60db5e6 ("drm/xe: Add a xe_bo subtest for shrinking / swapping") Cc: dri-devel@lists.freedesktop.org Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> #v1 Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241004141121.186177-1-thomas.hellstrom@linux.intel.com
2024-10-09drm/xe/bmg: improve cache flushing behaviourMatthew Auld
The BSpec says that EN_L3_RW_CCS_CACHE_FLUSH must be toggled on for manual global invalidation to take effect and actually flush device cache, however this also turns on flushing for things like pipecontrol, which occurs between submissions for compute/render. This sounds like massive overkill for our needs, where we already have the manual flushing on the display side with the global invalidation. Some observations on BMG: 1. Disabling l2 caching for host writes and stubbing out the driver global invalidation but keeping EN_L3_RW_CCS_CACHE_FLUSH enabled, has no impact on wb-transient-vs-display IGT, which makes sense since the pipecontrol is now flushing the device cache after the render copy. Without EN_L3_RW_CCS_CACHE_FLUSH the test then fails, which is also expected since device cache is now dirty and display engine can't see the writes. 2. Disabling EN_L3_RW_CCS_CACHE_FLUSH, but keeping the driver global invalidation also has no impact on wb-transient-vs-display. This suggests that the global invalidation still works as expected and is flushing the device cache without EN_L3_RW_CCS_CACHE_FLUSH turned on. With that drop EN_L3_RW_CCS_CACHE_FLUSH. This helps some workloads since we no longer flush the device cache between submissions as part of pipecontrol. Edit: We now also have clarification from HW side that BSpec was indeed wrong here. v2: - Rebase and update commit message. BSpec: 71718 Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Vitasta Wattal <vitasta.wattal@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241007074541.33937-2-matthew.auld@intel.com
2024-10-09drm/panel: Add Samsung AMS639RQ08 panel driverDanila Tikhonov
Add the driver for Samsung AMS639RQ08 FHD Plus CMD mode panel support found in: - Xiaomi Mi 9 Lite / CC9 (sdm710-xiaomi-pyxis) - Xiaomi Mi 9T / Redmi K20 (sm7150-xiaomi-davinci) - Xiaomi Mi 9T Pro / Redmi K20 Pro (sm8150-xiaomi-raphael) Tested-by: Degdag Mohamed <degdagmohamed@gmail.com> # xiaomi-raphael Tested-by: Jens Reidel <adrian@travitia.xyz> # xiaomi-davinci Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240930202448.188051-3-danila@jiaxyga.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240930202448.188051-3-danila@jiaxyga.com
2024-10-09drm: panel: jd9365da-h3: Remove unused num_init_cmds structure memberHugo Villeneuve
Now that the driver has been converted to use wrapped MIPI DCS functions, the num_init_cmds structure member is no longer needed, so remove it. Fixes: 35583e129995 ("drm/panel: panel-jadard-jd9365da-h3: use wrapped MIPI DCS functions") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20240930170503.1324560-1-hugo@hugovil.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240930170503.1324560-1-hugo@hugovil.com
2024-10-09drm/panel: Add support for S6E3HA8 panel driverDzmitry Sankouski
Add support for MIPI-DSI based S6E3HA8 AMOLED panel driver. This panel has 1440x2960 resolution, 5.8-inch physical size, and can be found in starqltechn device. Brightness regulation is not yet supported. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Link: https://lore.kernel.org/r/20241006-starqltechn_integration_upstream-v6-3-8336b9cd6c34@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241006-starqltechn_integration_upstream-v6-3-8336b9cd6c34@gmail.com
2024-10-09drm/mipi-dsi: add mipi_dsi_compression_mode_multiDzmitry Sankouski
mipi_dsi_compression_mode_multi can help with error handling. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20241006-starqltechn_integration_upstream-v6-1-8336b9cd6c34@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241006-starqltechn_integration_upstream-v6-1-8336b9cd6c34@gmail.com
2024-10-09drm/panel: ilitek-ili9881c: Report subpixel order according to rotationPhilipp Zabel
Assume a default RGB subpixel order and flip it around if 180° rotation is configured via address mode. Report subpixel order to userspace. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240626-drm-panel-ili9881c-rotation-v1-2-e0ff54173e32@pengutronix.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240626-drm-panel-ili9881c-rotation-v1-2-e0ff54173e32@pengutronix.de
2024-10-09drm/panel: ilitek-ili9881c: Explicitly set address mode, allow 180° rotationPhilipp Zabel
We can use horizontal and vertical flipping via the MIPI DCS address mode to rotate the display by 180° using the device tree "rotation" property. Since the tl050hdv35 panel has been defined as rotated, we have to invert the bits there. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240626-drm-panel-ili9881c-rotation-v1-1-e0ff54173e32@pengutronix.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240626-drm-panel-ili9881c-rotation-v1-1-e0ff54173e32@pengutronix.de
2024-10-09Merge tag 'amd-drm-fixes-6.12-2024-10-08' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.12-2024-10-08: amdgpu: - Fix invalid UBSAN warnings - Fix artifacts in MPO transitions - Hibernation fix amdkfd: - Fix an eviction fence leak radeon: - Add late register for connectors - Always set GEM function pointers Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241008142831.3739244-1-alexander.deucher@amd.com
2024-10-09Merge tag 'drm-misc-next-2024-09-26' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.13: UAPI Changes: - panthor: Add realtime group priority and priority query. Cross-subsystem Changes: - Add Vivek Kasireddy as udmabuf maintainer. - Assorted udmabuf changes. - Device tree binding updates. - dmabuf documentation fixes. - Move drm_rect to drm core module from kms helper. Core Changes: - Update scheduler documentation and concurrency fixes. - drm/ci updates. - Add memory-agnostic fbdev client and client-agnostic setup helper. - Huge driver conversion for using the above. Driver Changes: - Assorted fixes to imx, panel/nt35510, sti, accel/ivpu, v3d, vkms, host1x. - Add panel quirks for AYA NEO panels. - Make module autoloading work for bridge/it6505 and mcde. - Add huge page support to v3d using a custom shmfs. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a9b95e6f-9f35-464e-83f6-bda75b35ee0b@linux.intel.com
2024-10-08net: ibm: emac: mal: fix wrong gotoRosen Penev
dcr_map is called in the previous if and therefore needs to be unmapped. Fixes: 1ff0fcfcb1a6 ("ibm_newemac: Fix new MAL feature handling") Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://patch.msgid.link/20241007235711.5714-1-rosenp@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-08drm/xe: Make wedged_mode debugfs writableMatt Roper
The intent of this debugfs entry is to allow modification of wedging behavior, either from IGT tests or during manual debug; it should be marked as writable to properly reflect this. In practice this hasn't caused a problem because we always access wedged_mode as root, which ignores file permissions, but it's still misleading to have the entry incorrectly marked as RO. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: 6b8ef44cc0a9 ("drm/xe: Introduce the wedged_mode debugfs") Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241002230620.1249258-2-matthew.d.roper@intel.com (cherry picked from commit 93d93813422758f6c99289de446b19184019ef5a) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-10-08drm/xe: Restore GT freq on GSC load errorVinay Belgaumkar
As part of a Wa_22019338487, ensure that GT freq is restored even when GSC reload is not successful. Fixes: 3b1592fb7835 ("drm/xe/lnl: Apply Wa_22019338487") Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240925204918.1989574-1-vinay.belgaumkar@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 491418a258322bbd7f045e36884d2849b673f23d) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-10-08drm/xe/guc_submit: fix xa_store() error checkingMatthew Auld
Looks like we are meant to use xa_err() to extract the error encoded in the ptr. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Badal Nilawar <badal.nilawar@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241001084346.98516-7-matthew.auld@intel.com (cherry picked from commit f040327238b1a8311598c40ac94464e77fff368c) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-10-08drm/xe/ct: fix xa_store() error checkingMatthew Auld
Looks like we are meant to use xa_err() to extract the error encoded in the ptr. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Badal Nilawar <badal.nilawar@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241001084346.98516-6-matthew.auld@intel.com (cherry picked from commit 1aa4b7864707886fa40d959483591f3d3937fa28) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-10-08drm/xe/ct: prevent UAF in send_recv()Matthew Auld
Ensure we serialize with completion side to prevent UAF with fence going out of scope on the stack, since we have no clue if it will fire after the timeout before we can erase from the xa. Also we have some dependent loads and stores for which we need the correct ordering, and we lack the needed barriers. Fix this by grabbing the ct->lock after the wait, which is also held by the completion side. v2 (Badal): - Also print done after acquiring the lock and seeing timeout. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Badal Nilawar <badal.nilawar@intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241001084346.98516-5-matthew.auld@intel.com (cherry picked from commit 52789ce35c55ccd30c4b67b9cc5b2af55e0122ea) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-10-09Merge tag 'drm-misc-next-2024-09-20' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.12: UAPI Changes: - Add panthor/DEV_QUERY_TIMESTAMP_INFO query. Cross-subsystem Changes: - Updated dt bindings. - Add documentation explaining default errnos for fences. - Mark dma-buf heaps creation functions as __init. Core Changes: - Split DSC helpers from DP helpers. - Clang build fixes for drm/mm test. - Remove simple pipeline support for gem-vram, no longer any users left after converting bochs. - Add erno to drm_sched_start to distinguish between GPU and queue reset. - Add drm_framebuffer testcases. - Fix uninitialized spinlock acquisition with CONFIG_DRM_PANIC=n. - Use read_trylock instead of read_lock in dma_fence_begin_signalling to quiesce lockdep. Driver Changes: - Assorted small fixes and updates for tegra, host1x, imagination, nouveau, panfrost, panthor, panel/ili9341, mali, exynos, panel/samsung-s6e3fa7, ast, bridge/ti-sn65dsi86, panel/himax-hx83112a, bridge/tc358767, bridge/imx8mp-hdmi-tx, panel/khadas-ts050, panel/nt36523, panel/sony-acx565akm, kmb, accel/qaic, omap, v3d. - Add bridge/TI TDP158. - Assorted documentation updates. - Convert bochs from simple drm to gem shmem, and check modes against available memory. - Many VC4 fixes, most related to scaling and YUV support. - Convert some drivers to use SYSTEM_SLEEP_PM_OPS and RUNTIME_PM_OPS. - Rockchip 4k@60 support. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/445713a6-2427-4c53-8ec2-3a894ec62405@linux.intel.com
2024-10-08e1000e: change I219 (19) devices to ADPVitaly Lifshits
Sporadic issues, such as PHY access loss, have been observed on I219 (19) devices. It was found that these devices have hardware more closely related to ADP than MTP and the issues were caused by taking MTP-specific flows. Change the MAC and board types of these devices from MTP to ADP to correctly reflect the LAN hardware, and flows, of these devices. Fixes: db2d737d63c5 ("e1000e: Separate MTP board type from ADP") Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-10-08igb: Do not bring the device up after non-fatal errorMohamed Khalfella
Commit 004d25060c78 ("igb: Fix igb_down hung on surprise removal") changed igb_io_error_detected() to ignore non-fatal pcie errors in order to avoid hung task that can happen when igb_down() is called multiple times. This caused an issue when processing transient non-fatal errors. igb_io_resume(), which is called after igb_io_error_detected(), assumes that device is brought down by igb_io_error_detected() if the interface is up. This resulted in panic with stacktrace below. [ T3256] igb 0000:09:00.0 haeth0: igb: haeth0 NIC Link is Down [ T292] pcieport 0000:00:1c.5: AER: Uncorrected (Non-Fatal) error received: 0000:09:00.0 [ T292] igb 0000:09:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID) [ T292] igb 0000:09:00.0: device [8086:1537] error status/mask=00004000/00000000 [ T292] igb 0000:09:00.0: [14] CmpltTO [ 200.105524,009][ T292] igb 0000:09:00.0: AER: TLP Header: 00000000 00000000 00000000 00000000 [ T292] pcieport 0000:00:1c.5: AER: broadcast error_detected message [ T292] igb 0000:09:00.0: Non-correctable non-fatal error reported. [ T292] pcieport 0000:00:1c.5: AER: broadcast mmio_enabled message [ T292] pcieport 0000:00:1c.5: AER: broadcast resume message [ T292] ------------[ cut here ]------------ [ T292] kernel BUG at net/core/dev.c:6539! [ T292] invalid opcode: 0000 [#1] PREEMPT SMP [ T292] RIP: 0010:napi_enable+0x37/0x40 [ T292] Call Trace: [ T292] <TASK> [ T292] ? die+0x33/0x90 [ T292] ? do_trap+0xdc/0x110 [ T292] ? napi_enable+0x37/0x40 [ T292] ? do_error_trap+0x70/0xb0 [ T292] ? napi_enable+0x37/0x40 [ T292] ? napi_enable+0x37/0x40 [ T292] ? exc_invalid_op+0x4e/0x70 [ T292] ? napi_enable+0x37/0x40 [ T292] ? asm_exc_invalid_op+0x16/0x20 [ T292] ? napi_enable+0x37/0x40 [ T292] igb_up+0x41/0x150 [ T292] igb_io_resume+0x25/0x70 [ T292] report_resume+0x54/0x70 [ T292] ? report_frozen_detected+0x20/0x20 [ T292] pci_walk_bus+0x6c/0x90 [ T292] ? aer_print_port_info+0xa0/0xa0 [ T292] pcie_do_recovery+0x22f/0x380 [ T292] aer_process_err_devices+0x110/0x160 [ T292] aer_isr+0x1c1/0x1e0 [ T292] ? disable_irq_nosync+0x10/0x10 [ T292] irq_thread_fn+0x1a/0x60 [ T292] irq_thread+0xe3/0x1a0 [ T292] ? irq_set_affinity_notifier+0x120/0x120 [ T292] ? irq_affinity_notify+0x100/0x100 [ T292] kthread+0xe2/0x110 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork+0x2d/0x50 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork_asm+0x11/0x20 [ T292] </TASK> To fix this issue igb_io_resume() checks if the interface is running and the device is not down this means igb_io_error_detected() did not bring the device down and there is no need to bring it up. Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com> Reviewed-by: Yuanyuan Zhong <yzhong@purestorage.com> Fixes: 004d25060c78 ("igb: Fix igb_down hung on surprise removal") Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-10-08i40e: Fix macvlan leak by synchronizing access to mac_filter_hashAleksandr Loktionov
This patch addresses a macvlan leak issue in the i40e driver caused by concurrent access to vsi->mac_filter_hash. The leak occurs when multiple threads attempt to modify the mac_filter_hash simultaneously, leading to inconsistent state and potential memory leaks. To fix this, we now wrap the calls to i40e_del_mac_filter() and zeroing vf->default_lan_addr.addr with spin_lock/unlock_bh(&vsi->mac_filter_hash_lock), ensuring atomic operations and preventing concurrent access. Additionally, we add lockdep_assert_held(&vsi->mac_filter_hash_lock) in i40e_add_mac_filter() to help catch similar issues in the future. Reproduction steps: 1. Spawn VFs and configure port vlan on them. 2. Trigger concurrent macvlan operations (e.g., adding and deleting portvlan and/or mac filters). 3. Observe the potential memory leak and inconsistent state in the mac_filter_hash. This synchronization ensures the integrity of the mac_filter_hash and prevents the described leak. Fixes: fed0d9f13266 ("i40e: Fix VF's MAC Address change on VM") Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-10-08ice: Fix increasing MSI-X on VFMarcin Szycik
Increasing MSI-X value on a VF leads to invalid memory operations. This is caused by not reallocating some arrays. Reproducer: modprobe ice echo 0 > /sys/bus/pci/devices/$PF_PCI/sriov_drivers_autoprobe echo 1 > /sys/bus/pci/devices/$PF_PCI/sriov_numvfs echo 17 > /sys/bus/pci/devices/$VF0_PCI/sriov_vf_msix_count Default MSI-X is 16, so 17 and above triggers this issue. KASAN reports: BUG: KASAN: slab-out-of-bounds in ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] Read of size 8 at addr ffff8888b937d180 by task bash/28433 (...) Call Trace: (...) ? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] kasan_report+0xed/0x120 ? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] ice_vsi_cfg_def+0x3360/0x4770 [ice] ? mutex_unlock+0x83/0xd0 ? __pfx_ice_vsi_cfg_def+0x10/0x10 [ice] ? __pfx_ice_remove_vsi_lkup_fltr+0x10/0x10 [ice] ice_vsi_cfg+0x7f/0x3b0 [ice] ice_vf_reconfig_vsi+0x114/0x210 [ice] ice_sriov_set_msix_vec_count+0x3d0/0x960 [ice] sriov_vf_msix_count_store+0x21c/0x300 (...) Allocated by task 28201: (...) ice_vsi_cfg_def+0x1c8e/0x4770 [ice] ice_vsi_cfg+0x7f/0x3b0 [ice] ice_vsi_setup+0x179/0xa30 [ice] ice_sriov_configure+0xcaa/0x1520 [ice] sriov_numvfs_store+0x212/0x390 (...) To fix it, use ice_vsi_rebuild() instead of ice_vf_reconfig_vsi(). This causes the required arrays to be reallocated taking the new queue count into account (ice_vsi_realloc_stat_arrays()). Set req_txq and req_rxq before ice_vsi_rebuild(), so that realloc uses the newly set queue count. Additionally, ice_vsi_rebuild() does not remove VSI filters (ice_fltr_remove_all()), so ice_vf_init_host_cfg() is no longer necessary. Reported-by: Jacob Keller <jacob.e.keller@intel.com> Fixes: 2a2cb4c6c181 ("ice: replace ice_vf_recreate_vsi() with ice_vf_reconfig_vsi()") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-10-08ice: Flush FDB entries before resetWojciech Drewek
Triggering the reset while in switchdev mode causes errors[1]. Rules are already removed by this time because switch content is flushed in case of the reset. This means that rules were deleted from HW but SW still thinks they exist so when we get SWITCHDEV_FDB_DEL_TO_DEVICE notification we try to delete not existing rule. We can avoid these errors by clearing the rules early in the reset flow before they are removed from HW. Switchdev API will get notified that the rule was removed so we won't get SWITCHDEV_FDB_DEL_TO_DEVICE notification. Remove unnecessary ice_clear_sw_switch_recipes. [1] ice 0000:01:00.0: Failed to delete FDB forward rule, err: -2 ice 0000:01:00.0: Failed to delete FDB guard rule, err: -2 Fixes: 7c945a1a8e5f ("ice: Switchdev FDB events support") Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-10-08ice: Fix netif_is_ice() in Safe ModeMarcin Szycik
netif_is_ice() works by checking the pointer to netdev ops. However, it only checks for the default ice_netdev_ops, not ice_netdev_safe_mode_ops, so in Safe Mode it always returns false, which is unintuitive. While it doesn't look like netif_is_ice() is currently being called anywhere in Safe Mode, this could change and potentially lead to unexpected behaviour. Fixes: df006dd4b1dc ("ice: Add initial support framework for LAG") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-10-08ice: Fix entering Safe ModeMarcin Szycik
If DDP package is missing or corrupted, the driver should enter Safe Mode. Instead, an error is returned and probe fails. To fix this, don't exit init if ice_init_ddp_config() returns an error. Repro: * Remove or rename DDP package (/lib/firmware/intel/ice/ddp/ice.pkg) * Load ice Fixes: cc5776fe1832 ("ice: Enable switching default Tx scheduler topology") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-10-08nvme: delete unnecessary fallthru commentTokunori Ikegami
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-10-08nvmet-rdma: use sbitmap to replace rsp free listGuixin Liu
We can use sbitmap to manage all the nvmet_rdma_rsp instead of using free lists and spinlock, and we can use an additional tag to determine whether the nvmet_rdma_rsp is extra allocated. In addition, performance has improved: 1. testing environment is local rxe rdma devie and mem-based backstore device. 2. fio command, test the average 5 times: fio -filename=/dev/nvme0n1 --ioengine=libaio -direct=1 -size=1G -name=1 -thread -runtime=60 -time_based -rw=read -numjobs=16 -iodepth=128 -bs=4k -group_reporting 3. Before: 241k IOPS, After: 256k IOPS, an increase of about 5%. Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Reviewed-by: Jens Axboe <axboe@kernel.dk>
2024-10-08fbdev: Switch back to struct platform_driver::remove()Uwe Kleine-König
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/video/fbdev to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. While touching these files, make indention of the struct initializer consistent in several files. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Helge Deller <deller@gmx.de>
2024-10-08thermal: intel: int340x: processor: Add MMIO RAPL PL4 supportZhang Rui
Similar to the MSR RAPL interface, MMIO RAPL supports PL4 too, so add MMIO RAPL PL4d support to the processor_thermal driver. As a result, the powercap sysfs for MMIO RAPL will show a new "peak power" constraint. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://patch.msgid.link/20240930081801.28502-7-rui.zhang@intel.com [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-10-08thermal: intel: int340x: processor: Remove MMIO RAPL CPU hotplug supportZhang Rui
CPU0/package0 is always online and the MMIO RAPL driver runs on single package systems only, so there is no need to handle CPU hotplug in it. Always register a RAPL package device for package 0 and remove the unnecessary CPU hotplug support. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://patch.msgid.link/20240930081801.28502-6-rui.zhang@intel.com [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-10-08powercap: intel_rapl_msr: Add PL4 support for Arrowlake-USumeet Pawnikar
Add PL4 support for ArrowLake-U platform. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://patch.msgid.link/20240930081801.28502-5-rui.zhang@intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-10-08powercap: intel_rapl_tpmi: Ignore minor version changeZhang Rui
The hardware definition of every TPMI feature contains a major and minor version. When there is a change in the MMIO offset or change in the definition of a field, hardware will change major version. For addition of new fields without modifying existing MMIO offsets or fields, only the minor version is changed. If the driver has not been updated to recognize a new hardware major version, it cannot provide the RAPL interface to users due to possible register layout incompatibilities. However, the driver does not need to be updated every time the hardware minor version changes because in that case it will just miss some new functionality exposed by the hardware. The current implementation causes the driver to refuse to work for any hardware version change which is unnecessarily restrictive. If there is a minor version mismatch, log an information message and continue, but if there is a major version mismatch, log a warning and exit (as before). Signed-off-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://patch.msgid.link/20240930081801.28502-4-rui.zhang@intel.com Fixes: 9eef7f9da928 ("powercap: intel_rapl: Introduce RAPL TPMI interface driver") [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-10-08wifi: radiotap: Avoid -Wflex-array-member-not-at-end warningsGustavo A. R. Silva
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are getting ready to enable it, globally. So, in order to avoid ending up with a flexible-array member in the middle of multiple other structs, we use the `__struct_group()` helper to create a new tagged `struct ieee80211_radiotap_header_fixed`. This structure groups together all the members of the flexible `struct ieee80211_radiotap_header` except the flexible array. As a result, the array is effectively separated from the rest of the members without modifying the memory layout of the flexible structure. We then change the type of the middle struct members currently causing trouble from `struct ieee80211_radiotap_header` to `struct ieee80211_radiotap_header_fixed`. We also want to ensure that in case new members need to be added to the flexible structure, they are always included within the newly created tagged struct. For this, we use `static_assert()`. This ensures that the memory layout for both the flexible structure and the new tagged struct is the same after any changes. This approach avoids having to implement `struct ieee80211_radiotap_header_fixed` as a completely separate structure, thus preventing having to maintain two independent but basically identical structures, closing the door to potential bugs in the future. So, with these changes, fix the following warnings: drivers/net/wireless/ath/wil6210/txrx.c:309:50: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/intel/ipw2x00/ipw2100.c:2521:50: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/intel/ipw2x00/ipw2200.h:1146:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/intel/ipw2x00/libipw.h:595:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/marvell/libertas/radiotap.h:34:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/marvell/libertas/radiotap.h:5:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/microchip/wilc1000/mon.c:10:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/microchip/wilc1000/mon.c:15:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/virtual/mac80211_hwsim.c:758:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/virtual/mac80211_hwsim.c:767:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://patch.msgid.link/ZwBMtBZKcrzwU7l4@kspp Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-08wifi: iwlegacy: Clear stale interrupts before resuming deviceVille Syrjälä
iwl4965 fails upon resume from hibernation on my laptop. The reason seems to be a stale interrupt which isn't being cleared out before interrupts are enabled. We end up with a race beween the resume trying to bring things back up, and the restart work (queued form the interrupt handler) trying to bring things down. Eventually the whole thing blows up. Fix the problem by clearing out any stale interrupts before interrupts get enabled during resume. Here's a debug log of the indicent: [ 12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000 [ 12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000 [ 12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio. [ 12.042653] iwl4965 0000:10:00.0: On demand firmware reload [ 12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282 [ 12.052207] ieee80211 phy0: il4965_mac_start enter [ 12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff [ 12.052244] ieee80211 phy0: il4965_set_hw_ready hardware ready [ 12.052324] ieee80211 phy0: il_apm_init Init card's basic functions [ 12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S [ 12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm [ 12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm [ 12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK [ 12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations [ 12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up [ 12.058737] ieee80211 phy0: il4965_mac_start Start UP work done. [ 12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down [ 12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout [ 12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort [ 12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver [ 12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared [ 12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state [ 12.058827] ieee80211 phy0: _il_apm_stop_master stop master [ 12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear. [ 12.058869] ieee80211 phy0: Hardware restart was requested [ 16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms. [ 16.132303] ------------[ cut here ]------------ [ 16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue. [ 16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143 [ 16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.132463] Workqueue: async async_run_entry_fn [ 16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132501] Code: da 02 00 00 c6 83 ad 05 00 00 00 48 89 df e8 98 1b fc ff 85 c0 41 89 c7 0f 84 e9 02 00 00 48 c7 c7 a0 e6 48 a0 e8 d1 77 c4 e0 <0f> 0b eb 2d 84 c0 0f 85 8b 01 00 00 c6 87 ad 05 00 00 00 e8 69 1b [ 16.132504] RSP: 0018:ffffc9000029fcf0 EFLAGS: 00010282 [ 16.132507] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: 0000000000000001 [ 16.132509] RDX: ffffffff81f21a18 RSI: 0000000000000086 RDI: 0000000000000001 [ 16.132510] RBP: ffff8880072003c0 R08: 0000000000000000 R09: 0000000000000003 [ 16.132512] R10: 0000000000000000 R11: ffff88807e5b0000 R12: 0000000000000001 [ 16.132514] R13: 0000000000000000 R14: 0000000000000000 R15: 00000000ffffff92 [ 16.132515] FS: 0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000 [ 16.132517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.132519] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0 [ 16.132521] Call Trace: [ 16.132525] <TASK> [ 16.132526] ? __warn+0x77/0x120 [ 16.132532] ? ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132564] ? report_bug+0x15c/0x190 [ 16.132568] ? handle_bug+0x36/0x70 [ 16.132571] ? exc_invalid_op+0x13/0x60 [ 16.132573] ? asm_exc_invalid_op+0x16/0x20 [ 16.132579] ? ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132611] ? snd_hdac_bus_init_cmd_io+0x24/0x200 [snd_hda_core] [ 16.132617] ? pick_eevdf+0x133/0x1c0 [ 16.132622] ? check_preempt_wakeup_fair+0x70/0x90 [ 16.132626] ? wakeup_preempt+0x4a/0x60 [ 16.132628] ? ttwu_do_activate.isra.0+0x5a/0x190 [ 16.132632] wiphy_resume+0x79/0x1a0 [cfg80211] [ 16.132675] ? wiphy_suspend+0x2a0/0x2a0 [cfg80211] [ 16.132697] dpm_run_callback+0x75/0x1b0 [ 16.132703] device_resume+0x97/0x200 [ 16.132707] async_resume+0x14/0x20 [ 16.132711] async_run_entry_fn+0x1b/0xa0 [ 16.132714] process_one_work+0x13d/0x350 [ 16.132718] worker_thread+0x2be/0x3d0 [ 16.132722] ? cancel_delayed_work_sync+0x70/0x70 [ 16.132725] kthread+0xc0/0xf0 [ 16.132729] ? kthread_park+0x80/0x80 [ 16.132732] ret_from_fork+0x28/0x40 [ 16.132735] ? kthread_park+0x80/0x80 [ 16.132738] ret_from_fork_asm+0x11/0x20 [ 16.132741] </TASK> [ 16.132742] ---[ end trace 0000000000000000 ]--- [ 16.132930] ------------[ cut here ]------------ [ 16.132932] WARNING: CPU: 0 PID: 181 at net/mac80211/driver-ops.c:41 drv_stop+0xe7/0xf0 [mac80211] [ 16.132957] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.133014] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Tainted: G W 6.11.0-cl+ #143 [ 16.133018] Tainted: [W]=WARN [ 16.133019] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.133021] Workqueue: async async_run_entry_fn [ 16.133025] RIP: 0010:drv_stop+0xe7/0xf0 [mac80211] [ 16.133048] Code: 48 85 c0 74 0e 48 8b 78 08 89 ea 48 89 de e8 e0 87 04 00 65 ff 0d d1 de c4 5f 0f 85 42 ff ff ff e8 be 52 c2 e0 e9 38 ff ff ff <0f> 0b 5b 5d c3 0f 1f 40 00 41 54 49 89 fc 55 53 48 89 f3 2e 2e 2e [ 16.133050] RSP: 0018:ffffc9000029fc50 EFLAGS: 00010246 [ 16.133053] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: ffff88800377f6c0 [ 16.133054] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8880072008e0 [ 16.133056] RBP: 0000000000000000 R08: ffffffff81f238d8 R09: 0000000000000000 [ 16.133058] R10: ffff8880080520f0 R11: 0000000000000000 R12: ffff888008051c60 [ 16.133060] R13: ffff8880072008e0 R14: 0000000000000000 R15: ffff8880072011d8 [ 16.133061] FS: 0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000 [ 16.133063] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.133065] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0 [ 16.133067] Call Trace: [ 16.133069] <TASK> [ 16.133070] ? __warn+0x77/0x120 [ 16.133075] ? drv_stop+0xe7/0xf0 [mac80211] [ 16.133098] ? report_bug+0x15c/0x190 [ 16.133100] ? handle_bug+0x36/0x70 [ 16.133103] ? exc_invalid_op+0x13/0x60 [ 16.133105] ? asm_exc_invalid_op+0x16/0x20 [ 16.133109] ? drv_stop+0xe7/0xf0 [mac80211] [ 16.133132] ieee80211_do_stop+0x55a/0x810 [mac80211] [ 16.133161] ? fq_codel_reset+0xa5/0xc0 [sch_fq_codel] [ 16.133164] ieee80211_stop+0x4f/0x180 [mac80211] [ 16.133192] __dev_close_many+0xa2/0x120 [ 16.133195] dev_close_many+0x90/0x150 [ 16.133198] dev_close+0x5d/0x80 [ 16.133200] cfg80211_shutdown_all_interfaces+0x40/0xe0 [cfg80211] [ 16.133223] wiphy_resume+0xb2/0x1a0 [cfg80211] [ 16.133247] ? wiphy_suspend+0x2a0/0x2a0 [cfg80211] [ 16.133269] dpm_run_callback+0x75/0x1b0 [ 16.133273] device_resume+0x97/0x200 [ 16.133277] async_resume+0x14/0x20 [ 16.133280] async_run_entry_fn+0x1b/0xa0 [ 16.133283] process_one_work+0x13d/0x350 [ 16.133287] worker_thread+0x2be/0x3d0 [ 16.133290] ? cancel_delayed_work_sync+0x70/0x70 [ 16.133294] kthread+0xc0/0xf0 [ 16.133296] ? kthread_park+0x80/0x80 [ 16.133299] ret_from_fork+0x28/0x40 [ 16.133302] ? kthread_park+0x80/0x80 [ 16.133304] ret_from_fork_asm+0x11/0x20 [ 16.133307] </TASK> [ 16.133308] ---[ end trace 0000000000000000 ]--- [ 16.133335] ieee80211 phy0: PM: dpm_run_callback(): wiphy_resume [cfg80211] returns -110 [ 16.133360] ieee80211 phy0: PM: failed to restore async: error -110 Cc: stable@vger.kernel.org Cc: Stanislaw Gruszka <stf_xl@wp.pl> Cc: Kalle Valo <kvalo@kernel.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241001200745.8276-1-ville.syrjala@linux.intel.com
2024-10-08iommu/arm-smmu-v3: Convert comma to semicolonChen Ni
Replace comma between expressions with semicolons. Using a ',' in place of a ';' can have unintended side effects. Although that is not the case here, it is seems best to use ';' unless ',' is intended. Found by inspection. No functional change intended. Compile tested only. Fixes: e3b1be2e73db ("iommu/arm-smmu-v3: Reorganize struct arm_smmu_ctx_desc_cfg") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20240923021557.3432068-1-nichen@iscas.ac.cn Signed-off-by: Will Deacon <will@kernel.org>
generated by cgit (git 2.34.1) at 2025-10-01 01:33:43 +0000