summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-03-19phy: tegra: xusb: Protect Tegra186 soc with configJC Kuo
As xusb-tegra186.c will be reused for Tegra194, it would be good to protect Tegra186 soc data with CONFIG_ARCH_TEGRA_186_SOC. This commit also reshuffles Tegra186 soc data single CONFIG_ARCH_TEGRA_186_SOC will be sufficient. Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19phy: tegra: xusb: Add set_mode support for UTMI phy on Tegra186Nagarjuna Kristam
Add support for set_mode on UTMI phy. This allow XUSB host/device mode drivers to configure the hardware to corresponding modes. Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19phy: tegra: xusb: Add set_mode support for USB 2 phy on Tegra210Nagarjuna Kristam
Add support for set_mode on USB 2 phy. This allow XUSB host/device mode drivers to configure the hardware to corresponding modes. Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19phy: tegra: xusb: Add support to get companion USB 3 portNagarjuna Kristam
Tegra XUSB host, device mode driver requires the USB 3 companion port number for corresponding USB 2 port. Add API to retrieve the same. Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> Reviewed-by: JC Kuo <jckuo@nvidia.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19phy: tegra: xusb: Add usb-phy supportNagarjuna Kristam
For USB 2 ports that has usb-role-switch enabled, add usb-phy for corresponding USB 2 phy. USB role changes from role switch are then updated to corresponding host and device mode drivers via usb-phy notifier block. Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> [treding@nvidia.com: rebase onto Greg's usb-next branch] Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19phy: tegra: xusb: Add usb-role-switch supportNagarjuna Kristam
If usb-role-switch property is present in USB 2 port, register usb-role-switch to receive usb role changes. Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> [treding@nvidia.com: rebase onto Greg's usb-next branch] Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19irqchip/gic-v4.1: Ensure mutual exclusion between vPE affinity change and RD ↵Marc Zyngier
access Before GICv4.1, all operations would be serialized with the affinity changes by virtue of using the same ITS command queue. With v4.1, things change, as invalidations (and a number of other operations) are issued using the redistributor MMIO frame. We must thus make sure that these redistributor accesses cannot race against aginst the affinity change, or we may end-up talking to the wrong redistributor. To ensure this, we expand the irq_to_cpuid() helper to take a spinlock when the LPI is mapped to a vLPI (a new per-VPE lock) on each operation that requires mutual exclusion. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20200304203330.4967-4-maz@kernel.org
2020-03-19irqchip/gic-v4.1: Skip absent CPUs while iterating over redistributorsMarc Zyngier
In a system that is only sparsly populated with CPUs, we can end-up with redistributors structures that are not initialized. Let's make sure we don't try and access those when iterating over them (in this case when checking we have a L2 VPE table). Fixes: 4e6437f12d6e ("irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level") Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20200304203330.4967-3-maz@kernel.org
2020-03-19irqchip/gic-v3: Use SGIs without active state if offeredMarc Zyngier
To allow the direct injection of SGIs into a guest, the GICv4.1 architecture has to sacrifice the Active state so that SGIs look a lot like LPIs (they are injected by the same mechanism). In order not to break existing software, the architecture gives offers guests OSs the choice: SGIs with or without an active state. It is the hypervisors duty to honor the guest's choice. For this, the architecture offers a discovery bit indicating whether the GIC supports GICv4.1 SGIs (GICD_TYPER2.nASSGIcap), and another bit indicating whether the guest wants Active-less SGIs or not (controlled by GICD_CTLR.nASSGIreq). A hypervisor not supporting GICv4.1 SGIs would leave nASSGIcap clear, and a guest not knowing about GICv4.1 SGIs (or definitely wanting an Active state) would leave nASSGIreq clear (both being thankfully backward compatible with older revisions of the GIC). Since Linux is perfectly happy without an active state on SGIs, inform the hypervisor that we'll use that if offered. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20200304203330.4967-2-maz@kernel.org
2020-03-19Revert "drivers: base: power: wakeup.c: Use built-in RCU list checking"Greg Kroah-Hartman
This reverts commit 8ba88804bb3b877c841bc1864a8605111580cd0b as a better version is already in Rafael's tree, sorry about that. Reported-by: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-19irqchip/versatile-fpga: Handle chained IRQs properlySungbo Eo
Enclose the chained handler with chained_irq_{enter,exit}(), so that the muxed interrupts get properly acked. This patch also fixes a reboot bug on OX820 SoC, where the jiffies timer interrupt is never acked. The kernel waits a clock tick forever in calibrate_delay_converge(), which leads to a boot hang. Fixes: c41b16f8c9d9 ("ARM: integrator/versatile: consolidate FPGA IRQ handling code") Signed-off-by: Sungbo Eo <mans0n@gorani.run> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200319023448.1479701-1-mans0n@gorani.run
2020-03-18wireguard: noise: error out precomputed DH during handshake rather than configJason A. Donenfeld
We precompute the static-static ECDH during configuration time, in order to save an expensive computation later when receiving network packets. However, not all ECDH computations yield a contributory result. Prior, we were just not letting those peers be added to the interface. However, this creates a strange inconsistency, since it was still possible to add other weird points, like a valid public key plus a low-order point, and, like points that result in zeros, a handshake would not complete. In order to make the behavior more uniform and less surprising, simply allow all peers to be added. Then, we'll error out later when doing the crypto if there's an issue. This also adds more separation between the crypto layer and the configuration layer. Discussed-with: Mathias Hall-Andersen <mathias@hall-andersen.dk> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18wireguard: receive: remove dead code from default packet type caseJason A. Donenfeld
The situation in which we wind up hitting the default case here indicates a major bug in earlier parsing code. It is not a usual thing that should ever happen, which means a "friendly" message for it doesn't make sense. Rather, replace this with a WARN_ON, just like we do earlier in the file for a similar situation, so that somebody sends us a bug report and we can fix it. Reported-by: Fabian Freyer <fabianfreyer@radicallyopensecurity.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18wireguard: queueing: account for skb->protocol==0Jason A. Donenfeld
We carry out checks to the effect of: if (skb->protocol != wg_examine_packet_protocol(skb)) goto err; By having wg_skb_examine_untrusted_ip_hdr return 0 on failure, this means that the check above still passes in the case where skb->protocol is zero, which is possible to hit with AF_PACKET: struct sockaddr_pkt saddr = { .spkt_device = "wg0" }; unsigned char buffer[5] = { 0 }; sendto(socket(AF_PACKET, SOCK_PACKET, /* skb->protocol = */ 0), buffer, sizeof(buffer), 0, (const struct sockaddr *)&saddr, sizeof(saddr)); Additional checks mean that this isn't actually a problem in the code base, but I could imagine it becoming a problem later if the function is used more liberally. I would prefer to fix this by having wg_examine_packet_protocol return a 32-bit ~0 value on failure, which will never match any value of skb->protocol, which would simply change the generated code from a mov to a movzx. However, sparse complains, and adding __force casts doesn't seem like a good idea, so instead we just add a simple helper function to check for the zero return value. Since wg_examine_packet_protocol itself gets inlined, this winds up not adding an additional branch to the generated code, since the 0 return value already happens in a mergable branch. Reported-by: Fabian Freyer <fabianfreyer@radicallyopensecurity.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19Merge tag 'drm-misc-fixes-2020-03-18-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - drm/lease: fix WARNING in idr_destroy - Fix AVI frame colorimetry in the dw-hdmi bridge. - Fix compiler warning in komeda by annotating functions as __maybe_unused. - Downgrade bochs pci_request_region failure from error to warning to workaround firmware fb. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7654ac39-deb8-c9ca-9fd5-ef77b2636380@linux.intel.com
2020-03-18vxlan: check return value of gro_cells_init()Taehee Yoo
gro_cells_init() returns error if memory allocation is failed. But the vxlan module doesn't check the return value of gro_cells_init(). Fixes: 58ce31cca1ff ("vxlan: GRO support at tunnel layer")` Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18spi: spi-fsl-dspi: Add support for LS1028AVladimir Oltean
This is similar to the DSPI instantiation on LS1028A, except that: - The A-011218 erratum has been fixed, so DMA works - The endianness is different, which has implications on XSPI mode Some benchmarking with the following command: spidev_test --device /dev/spidev2.0 --bpw 8 --size 256 --cpha --iter 10000000 --speed 20000000 shows that in DMA mode, it can achieve around 2400 kbps, and in XSPI mode, the same command goes up to 4700 kbps. This is somewhat to be expected, since the DMA buffer size is extremely small at 8 bytes, the winner becomes whomever can prepare the buffers for transmission quicker, and DMA mode has higher overhead there. So XSPI FIFO mode has been chosen as the operating mode for this chip. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20200318001603.9650-11-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-18spi: spi-fsl-dspi: Move invariant configs out of dspi_transfer_one_messageVladimir Oltean
The operating mode (DMA, XSPI, EOQ) is not going to change across the lifetime of the device. So it makes no sense to keep writing to SPI_RSER on each message. Move this configuration to dspi_init instead. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20200318001603.9650-10-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-18spi: spi-fsl-dspi: Fix interrupt-less DMA mode taking an XSPI code pathVladimir Oltean
Interrupts are not necessary for DMA functionality, since the completion event is provided by the DMA driver. But if the driver fails to request the IRQ defined in the device tree, it will call dspi_poll which would make the driver hang waiting for data to become available in the RX FIFO. Fixes: c55be3059159 ("spi: spi-fsl-dspi: Use poll mode in case the platform IRQ is missing") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20200318001603.9650-9-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-18spi: spi-fsl-dspi: Avoid NULL pointer in dspi_slave_abort for non-DMA modeVladimir Oltean
The driver does not create the dspi->dma structure unless operating in DSPI_DMA_MODE, so it makes sense to check for that. Fixes: f4b323905d8b ("spi: Introduce dspi_slave_abort() function for NXP's dspi SPI driver") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20200318001603.9650-8-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-18spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completionVladimir Oltean
Currently the driver puts the process in interruptible sleep waiting for the interrupt train to finish transfer to/from the tx_buf and rx_buf. But exiting the process with ctrl-c may make the kernel panic: the wait_event_interruptible call will return -ERESTARTSYS, which a proper driver implementation is perhaps supposed to handle, but nonetheless this one doesn't, and aborts the transfer altogether. Actually when the task is interrupted, there is still a high chance that the dspi_interrupt is still triggering. And if dspi_transfer_one_message returns execution all the way to the spi_device driver, that can free the spi_message and spi_transfer structures, leaving the interrupts to access a freed tx_buf and rx_buf. hexdump -C /dev/mtd0 00000000 00 75 68 75 0a ff ff ff ff ff ff ff ff ff ff ff |.uhu............| 00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| * ^C[ 38.495955] fsl-dspi 2120000.spi: Waiting for transfer to complete failed! [ 38.503097] spi_master spi2: failed to transfer one message from queue [ 38.509729] Unable to handle kernel paging request at virtual address ffff800095ab3377 [ 38.517676] Mem abort info: [ 38.520474] ESR = 0x96000045 [ 38.523533] EC = 0x25: DABT (current EL), IL = 32 bits [ 38.528861] SET = 0, FnV = 0 [ 38.531921] EA = 0, S1PTW = 0 [ 38.535067] Data abort info: [ 38.537952] ISV = 0, ISS = 0x00000045 [ 38.541797] CM = 0, WnR = 1 [ 38.544771] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000082621000 [ 38.551494] [ffff800095ab3377] pgd=00000020fffff003, p4d=00000020fffff003, pud=0000000000000000 [ 38.560229] Internal error: Oops: 96000045 [#1] PREEMPT SMP [ 38.565819] Modules linked in: [ 38.568882] CPU: 0 PID: 2729 Comm: hexdump Not tainted 5.6.0-rc4-next-20200306-00052-gd8730cdc8a0b-dirty #193 [ 38.578834] Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT) [ 38.587129] pstate: 20000085 (nzCv daIf -PAN -UAO) [ 38.591941] pc : ktime_get_real_ts64+0x3c/0x110 [ 38.596487] lr : spi_take_timestamp_pre+0x40/0x90 [ 38.601203] sp : ffff800010003d90 [ 38.604525] x29: ffff800010003d90 x28: ffff80001200e000 [ 38.609854] x27: ffff800011da9000 x26: ffff002079c40400 [ 38.615184] x25: ffff8000117fe018 x24: ffff800011daa1a0 [ 38.620513] x23: ffff800015ab3860 x22: ffff800095ab3377 [ 38.625841] x21: 000000000000146e x20: ffff8000120c3000 [ 38.631170] x19: ffff0020795f6e80 x18: ffff800011da9948 [ 38.636498] x17: 0000000000000000 x16: 0000000000000000 [ 38.641826] x15: ffff800095ab3377 x14: 0720072007200720 [ 38.647155] x13: 0720072007200765 x12: 0775076507750771 [ 38.652483] x11: 0720076d076f0772 x10: 0000000000000040 [ 38.657812] x9 : ffff8000108e2100 x8 : ffff800011dcabe8 [ 38.663139] x7 : 0000000000000000 x6 : ffff800015ab3a60 [ 38.668468] x5 : 0000000007200720 x4 : ffff800095ab3377 [ 38.673796] x3 : 0000000000000000 x2 : 0000000000000ab0 [ 38.679125] x1 : ffff800011daa000 x0 : 0000000000000026 [ 38.684454] Call trace: [ 38.686905] ktime_get_real_ts64+0x3c/0x110 [ 38.691100] spi_take_timestamp_pre+0x40/0x90 [ 38.695470] dspi_fifo_write+0x58/0x2c0 [ 38.699315] dspi_interrupt+0xbc/0xd0 [ 38.702987] __handle_irq_event_percpu+0x78/0x2c0 [ 38.707706] handle_irq_event_percpu+0x3c/0x90 [ 38.712161] handle_irq_event+0x4c/0xd0 [ 38.716008] handle_fasteoi_irq+0xbc/0x170 [ 38.720115] generic_handle_irq+0x2c/0x40 [ 38.724135] __handle_domain_irq+0x68/0xc0 [ 38.728243] gic_handle_irq+0xc8/0x160 [ 38.732000] el1_irq+0xb8/0x180 [ 38.735149] spi_nor_spimem_read_data+0xe0/0x140 [ 38.739779] spi_nor_read+0xc4/0x120 [ 38.743364] mtd_read_oob+0xa8/0xc0 [ 38.746860] mtd_read+0x4c/0x80 [ 38.750007] mtdchar_read+0x108/0x2a0 [ 38.753679] __vfs_read+0x20/0x50 [ 38.757002] vfs_read+0xa4/0x190 [ 38.760237] ksys_read+0x6c/0xf0 [ 38.763471] __arm64_sys_read+0x20/0x30 [ 38.767319] el0_svc_common.constprop.3+0x90/0x160 [ 38.772125] do_el0_svc+0x28/0x90 [ 38.775449] el0_sync_handler+0x118/0x190 [ 38.779468] el0_sync+0x140/0x180 [ 38.782793] Code: 91000294 1400000f d50339bf f9405e80 (f90002c0) [ 38.788910] ---[ end trace 55da560db4d6bef7 ]--- [ 38.793540] Kernel panic - not syncing: Fatal exception in interrupt [ 38.799914] SMP: stopping secondary CPUs [ 38.803849] Kernel Offset: disabled [ 38.807344] CPU features: 0x10002,20006008 [ 38.811451] Memory Limit: none [ 38.814513] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- So it is clear that the "interruptible" part isn't handled correctly. When the process receives a signal, one could either attempt a clean abort (which appears to be difficult with this hardware) or just keep restarting the sleep until the wait queue really completes. But checking in a loop for -ERESTARTSYS is a bit too complicated for this driver, so just make the sleep uninterruptible, to avoid all that nonsense. The wait queue was actually restructured as a completion, after polling other drivers for the most "popular" approach. Fixes: 349ad66c0ab0 ("spi:Add Freescale DSPI driver for Vybrid VF610 platform") Reported-by: Michael Walle <michael@walle.cc> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20200318001603.9650-7-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-18spi: spi-fsl-dspi: Protect against races on dspi->words_in_flightVladimir Oltean
dspi->words_in_flight is a variable populated in the *_write functions and used in the dspi_fifo_read function. It is also used in dspi_fifo_write, immediately after transmission, to update the message->actual_length variable used by higher layers such as spi-mem for integrity checking. But it may happen that the IRQ which calls dspi_fifo_read to be triggered before the updating of message->actual_length takes place. In that case, dspi_fifo_read will decrement dspi->words_in_flight to -1, and that will cause an invalid modification of message->actual_length. For that, we make the simplest fix possible: to not decrement the actual shared variable in dspi->words_in_flight from dspi_fifo_read, but actually a copy of it which is on stack. But even if dspi_fifo_read from the next IRQ does not interfere with the dspi_fifo_write of the current chunk, the *next* dspi_fifo_write still can. So we must assume that everything after the last write to the TX FIFO can be preempted by the "TX complete" IRQ, and the dspi_fifo_write function must be safe against that. This means refactoring the 2 flavours of FIFO writes (for EOQ and XSPI) such that the calculation of the number of words to be written is common and happens a priori. This way, the code for updating the message->actual_length variable works with a copy and not with the volatile dspi->words_in_flight. After some interior debate, the dspi->progress variable used for software timestamping was *not* backed up against preemption in a copy on stack. Because if preemption does occur between spi_take_timestamp_pre and spi_take_timestamp_post, there's really no point in trying to save anything. The first-in-time spi_take_timestamp_post call with a dspi->progress higher than the requested xfer->ptp_sts_word_post will trigger xfer->timestamped = true anyway and will close the deal. To understand the above a bit better, consider a transfer with xfer->ptp_sts_word_pre = xfer->ptp_sts_word_post = 3, and xfer->bits_per_words = 8 (so byte 3 needs to be timestamped). The DSPI controller timestamps in chunks of 4 bytes at a time, and preemption occurs in the middle of timestamping the first chunk: spi_take_timestamp_pre(0) . . (preemption) . . spi_take_timestamp_pre(4) . . spi_take_timestamp_post(7) . spi_take_timestamp_post(3) So the reason I'm not bothering to back up dspi->progress for that spi_take_timestamp_post(3) is that spi_take_timestamp_post(7) is going to (a) be more honest, (b) provide better accuracy and (c) already render the spi_take_timestamp_post(3) into a noop by setting xfer->timestamped = true anyway. Fixes: d59c90a2400f ("spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode") Reported-by: Michael Walle <michael@walle.cc> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20200318001603.9650-6-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-18spi: spi-fsl-dspi: Avoid reading more data than written in EOQ modeVladimir Oltean
If dspi->words_in_flight is populated with the hardware FIFO size, then in dspi_fifo_read it will attempt to read more data at the end of a buffer that is not a multiple of 16 bytes in length. It will probably time out attempting to do so. So limit the num_fifo_entries variable to the actual number of FIFO entries that is going to be used. Fixes: d59c90a2400f ("spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20200318001603.9650-5-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-18spi: spi-fsl-dspi: Fix bits-per-word acceleration in DMA modeVladimir Oltean
In DMA mode, dspi_setup_accel does not get called, which results in the dspi->oper_word_size variable (which is used by dspi_dma_xfer) to not be initialized properly. Because oper_word_size is zero, a few calculations end up being incorrect, and the DMA transfer eventually times out instead of sending anything on the wire. Set up native transfers (or 8-on-16 acceleration) using dspi_setup_accel for DMA mode too. Also take the opportunity and simplify the DMA buffer handling a little bit. Fixes: 6c1c26ecd9a3 ("spi: spi-fsl-dspi: Accelerate transfers using larger word size if possible") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20200318001603.9650-4-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-18spi: spi-fsl-dspi: Fix little endian access to PUSHR CMD and TXDATAVladimir Oltean
In XSPI mode, the 32-bit PUSHR register can be written to separately: the higher 16 bits are for commands and the lower 16 bits are for data. This has nicely been hacked around, by defining a second regmap with a width of 16 bits, and effectively splitting a 32-bit register into 2 16-bit ones, from the perspective of this regmap_pushr. The problem is the assumption about the controller's endianness. If the controller is little endian (such as anything post-LS1046A), then the first 2 bytes, in the order imposed by memory layout, will actually hold the TXDATA, and the last 2 bytes will hold the CMD. So take the controller's endianness into account when performing split writes to PUSHR. The obvious and simple solution would have been to call regmap_get_val_endian(), but that is an internal regmap function and we don't want to change regmap just for this. Therefore, we just re-read the "big-endian" device tree property. Fixes: 58ba07ec79e6 ("spi: spi-fsl-dspi: Add support for XSPI mode registers") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20200318001603.9650-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-18spi: spi-fsl-dspi: Don't access reserved fields in SPI_MCRVladimir Oltean
The SPI_MCR_PCSIS macro assumes that the controller has a number of chip select signals equal to 6. That is not always the case, but actually is described through the driver-specific "spi-num-chipselects" device tree binding. LS1028A for example only has 4 chip selects. Don't write to the upper bits of the PCSIS field, which are reserved in the reference manual. Fixes: 349ad66c0ab0 ("spi:Add Freescale DSPI driver for Vybrid VF610 platform") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20200318001603.9650-2-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-18drm/amdgpu: fix typo for vcn2.5/jpeg2.5 idle checkJames Zhu
fix typo for vcn2.5/jpeg2.5 idle check Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-18drm/amdgpu: fix typo for vcn2/jpeg2 idle checkJames Zhu
fix typo for vcn2/jpeg2 idle check Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-18drm/amdgpu: fix typo for vcn1 idle checkJames Zhu
fix typo for vcn1 idle check Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-18scsi: Convert to use set_capacity_revalidate_and_notifyBalbir Singh
block/genhd provides set_capacity_revalidate_and_notify() for sending RESIZE notifications via uevents. This notification is newly added to scsi sd. Signed-off-by: Balbir Singh <sblbir@amazon.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-18nvme: Convert to use set_capacity_revalidate_and_notifyBalbir Singh
block/genhd provides set_capacity_revalidate_and_notify() for sending RESIZE notifications via uevents. This notification is newly added to NVME devices Signed-off-by: Balbir Singh <sblbir@amazon.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-18xen-blkfront.c: Convert to use set_capacity_revalidate_and_notifyBalbir Singh
block/genhd provides set_capacity_revalidate_and_notify() for sending RESIZE notifications via uevents. Signed-off-by: Balbir Singh <sblbir@amazon.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-18virtio_blk.c: Convert to use set_capacity_revalidate_and_notifyBalbir Singh
block/genhd provides set_capacity_revalidate_and_notify() for sending RESIZE notifications via uevents. Signed-off-by: Balbir Singh <sblbir@amazon.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-18regulator: da9063: fix suspendMartin Fuzzey
The .set_suspend_enable() and .set_suspend_disable() methods are not supposed to immediately change the regulator state but just indicated if the regulator should be enabled or disabled when standby mode is entered (by a hardware signal). However currently they set control the SEL bits in the DVC registers, which causes the voltage to change to immediately between the "A" (normal) and "B" (standby) values as programmed and does nothing for the enable state... This means that "regulator-on-in-suspend" does not work (the regulator is switched off when the PMIC enters standby mode on the hardware signal) and, potentially, depending on the A and B voltage configurations the voltage could be incorrectly changed *before* actually entering suspend. The right bit to use for the functionality is the "CONF" bit in the "CONT" register. The detailed register description says "Sequencer target state" for this bit which is not very clear but the functional description is clearer. >From 5.1.5 System Enable: De-asserting SYS_EN (changing from active to passive state) clears control SYSTEM_EN which triggers a power down sequence into hibernate/standby mode ... With the exception of supplies that have the xxxx_CONF control bit asserted, all regulators in power domains POWER1, POWER, and SYSTEM are sequentially disabled in reverse order. Regulators with the <x>_CONF bit set remain on but change the active voltage controlregisters from V<x>_A to V<x>_B (if V<x>_B is notalready selected). Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Link: https://lore.kernel.org/r/1584461691-14344-1-git-send-email-martin.fuzzey@flowbird.group Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-18drm/lease: fix WARNING in idr_destroyQiujun Huang
drm_lease_create takes ownership of leases. And leases will be released by drm_master_put. drm_master_put ->drm_master_destroy ->idr_destroy So we needn't call idr_destroy again. Reported-and-tested-by: syzbot+05835159fe322770fe3d@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1584518030-4173-1-git-send-email-hqjagain@gmail.com
2020-03-18drivers: base: power: wakeup.c: Use built-in RCU list checkingMadhuparna Bhowmik
Pass cond argument to list_for_each_entry_rcu() to fix the following false positive lockdep warning and other uses of list_for_each_entry_rcu() in wakeup.c. [ 331.934648] ============================= [ 331.934650] WARNING: suspicious RCU usage [ 331.934653] 5.6.0-rc1+ #5 Not tainted [ 331.934655] ----------------------------- [ 331.934657] drivers/base/power/wakeup.c:408 RCU-list traversed in non-reader section!! [ 333.025156] ============================= [ 333.025161] WARNING: suspicious RCU usage [ 333.025168] 5.6.0-rc1+ #5 Not tainted [ 333.025173] ----------------------------- [ 333.025180] drivers/base/power/wakeup.c:424 RCU-list traversed in non-reader section!! Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Link: https://lore.kernel.org/r/20200228174745.9308-1-madhuparnabhowmik10@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18component: allow missing unbind callbackMarco Felsch
The component framework reuses the devres managed functions. There is no need to specify an unbind() callback if the driver only wants to release the devres managed resources. The bind/unbind is like the probe/remove pair. The bind/probe is necessary and the unbind/remove is optional. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20200227104547.30085-1-m.felsch@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18tty: fix compat TIOCGSERIAL checking wrong function ptrEric Biggers
Commit 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start checking for the presence of the ->set_serial function pointer rather than ->get_serial. This appears to be a copy-and-paste error, since ->get_serial is the function pointer that is called as well as the pointer that is checked by the non-compat version of TIOCGSERIAL. Fix this by checking the correct function pointer. Fixes: 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20200224182044.234553-3-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18tty: fix compat TIOCGSERIAL leaking uninitialized memoryEric Biggers
Commit 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start copying a whole 'serial_struct32' to userspace rather than individual fields, but failed to initialize all padding and fields -- namely the hole after the 'iomem_reg_shift' field, and the 'reserved' field. Fix this by initializing the struct to zero. [v2: use sizeof, and convert the adjacent line for consistency.] Reported-by: syzbot+8da9175e28eadcb203ce@syzkaller.appspotmail.com Fixes: 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20200224182044.234553-2-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18tty: drop outdated comments about release_tty() lockingEric Biggers
The current version of the TTY code unlocks the tty_struct(s) before release_tty() rather than after. Moreover, tty_unlock_pair() no longer exists. Thus, remove the outdated comments regarding tty_unlock_pair(). Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20200224073359.292795-1-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18firmware: fix a double abort case with fw_load_sysfs_fallbackJunyong Sun
fw_sysfs_wait_timeout may return err with -ENOENT at fw_load_sysfs_fallback and firmware is already in abort status, no need to abort again, so skip it. This issue is caused by concurrent situation like below: when thread 1# wait firmware loading, thread 2# may write -1 to abort loading and wakeup thread 1# before it timeout. so wait_for_completion_killable_timeout of thread 1# would return remaining time which is != 0 with fw_st->status FW_STATUS_ABORTED.And the results would be converted into err -ENOENT in __fw_state_wait_common and transfered to fw_load_sysfs_fallback in thread 1#. The -ENOENT means firmware status is already at ABORTED, so fw_load_sysfs_fallback no need to get mutex to abort again. ----------------------------- thread 1#,wait for loading fw_load_sysfs_fallback ->fw_sysfs_wait_timeout ->__fw_state_wait_common ->wait_for_completion_killable_timeout in __fw_state_wait_common, ... 93 ret = wait_for_completion_killable_timeout(&fw_st->completion, timeout); 94 if (ret != 0 && fw_st->status == FW_STATUS_ABORTED) 95 return -ENOENT; 96 if (!ret) 97 return -ETIMEDOUT; 98 99 return ret < 0 ? ret : 0; ----------------------------- thread 2#, write -1 to abort loading firmware_loading_store ->fw_load_abort ->__fw_load_abort ->fw_state_aborted ->__fw_state_set ->complete_all in __fw_state_set, ... 111 if (status == FW_STATUS_DONE || status == FW_STATUS_ABORTED) 112 complete_all(&fw_st->completion); ------------------------------------------- BTW,the double abort issue would not cause kernel panic or create an issue, but slow down it sometimes.The change is just a minor optimization. Signed-off-by: Junyong Sun <sunjunyong@xiaomi.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/1583202968-28792-1-git-send-email-sunjunyong@xiaomi.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18mmc: rtsx_pci: Fix support for speed-modes that relies on tuningRicky Wu
The TX/RX register should not be treated the same way to allow for better support of tuning. Fix this by using a default initial value for TX. Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200316025232.1167-1-ricky_wu@realtek.com [Ulf: Updated changelog] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18USB: serial: f81232: add control driver for F81534AJi-Ze Hong (Peter Hong)
The Fintek F81534A series contains 1 HUB, 1 GPIO device and n UARTs. The UARTs are disabled by default and need to be enabled by the GPIO device (2c42:16F8). When F81534A plug to host, we can only see 1 HUB and 1 GPIO device and we write 0x8fff to GPIO device register F81534A_CTRL_CMD_ENABLE_PORT (116h) to enable all available serial ports. Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> [johan: reword commit message and an error message slightly] Signed-off-by: Johan Hovold <johan@kernel.org>
2020-03-18arch_topology: Fix putting invalid cpu clkJeffy Chen
Add a sanity check before putting the cpu clk. Fixes: b8fe128dad8f (“arch_topology: Adjust initial CPU capacities with current freq") Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Link: https://lore.kernel.org/r/20200317063308.23209-1-jeffy.chen@rock-chips.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18Merge tag 'iio-5.7a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new IIO device support, fatures and cleanups for the 5.7 cycle Includes changes for the counter subsystem Core Feature * Explicitly handle sysfs values in dB, including correctly handling the needed postfix dB. * Add a TODO to suggest suitable activities for new contributors to IIO now the vast majority of drivers are out of staging (and the remaining ones there are 'hard'). Also update the TODO in staging to remove stale entries. Staging graduations * ad7192 ADC. New device support * ad5770r - New driver for this 6 channel DAC including DT bindings. * ad8366 - Add supprot for the hmc1119 attenuator. * al3010 - New driver supporting this Dyna-image light sensors. - Power management and DT bindings added in additional patches. * atlas-sensor - Add support for atlas DO-SM device. Reads disolved oxygen in a solution. * gpap002x00f - New driver and bindings to support the GP2AP002A00F and GP2AP002S00F light and proximity sensors. There is some limited existing support in input. The intent is to drop this driver once IIO driver is in place. * hmc425a - New driver for this attenuator. * icp10100 - New driver for this presure sensor. * ltc2632 - Add support for the ltc2636 8 channel DAC. Includes bindings and some tidying up of the driver. * inv_mpu6050 - Support IAM20680, ICM20609, ICM20689 and ICM20690. Includes related tidy up and rework of low pass filter bandwidth handling to give suitable values for all chips. Binding conversions to yaml or missing bindings docs. * atlas-sensor, including consolidation of previous 3 separate docs into 1. * ad7923, previously no doc. * max1363, split into max1238 and max1363 to simplify yaml. * stm32-adc Features * (counter) 104-quad-8 - Support a filter clock prescaler. - Support reporting of encoder cable status. * ad7124 - Low pass filter support. - Debugfs interface to access registers directly. * ad8366 - Support control of hardware gain. * inv_mpu6050 - Runtime pm with autosuspend. * npcm adc - Add reset support. This is a breaking change if DT is not in sync, however this device is a BMC so the ecosystem is closed enought that this should not be a problem. * srf04 - Add power management with DT bindings for the GPIO. * stm32-timer-trigger - Power management. * (counter) stm32-timer-cnt - Power management. * vcnl4000 - Enable runtime PM for devices that don't use on demand measurement. Cleanups and minor fixes * core - Avoid double read when using debugfs. Whilst we provide no guarantees on lack of side effects using the debugfs interfaces, this one is generate unexpected results so let us tidy it up. * dac/Kconfig - Alphabetic order. * ad5755 - Grammar and minor other fixes. * ad7124 - Fail probe if get_voltage fails as no meaningful readings can be had without knowing the external reference. - Switch to selection between different channel attributes rather than building the arrays at runtime. - Remove the spi_device_id table as the driver cannot be probled without more information that can be provided without dt. - Update sysfs docs to provide more inormation and bring remaining docs for this part out of staging. * ad9292 - Use new SPI transfer delay structure. * adis library - Add unlocked version of adis_initial_startup and refactor the function. - Add a product ID santiy check. - Add support for different self test registers. - Use new SPI delay structure. - Add new docs and tidy up existing. * adis16136 - Initialize adis_data statically. * adis16400 - Initialize adis_data statically. * adis16460 - Use core __adis_initial_Startup now it supports everything needed. * adis16480 - Initialize adis_data statically. - Use core __adis_initial_startup now it supports everything needed. * al3320a - Add missing DT binding docs. - Tidy up code formatting. - Simplify error paths using devm_add_action_or_reset. - Ensure autoloading works by adding the of_match_table. * atlas-sensor - Drop false requirement for interrupt line, the value can be polled using a sysfs or hrtimer type trigger. * exynos-adc - Silence warning message on deferring probe. * gp2ap002 - Greatly simplify the Lux LUT. - Reorder actions around buffer setup and tear down as part of a sub-system wide standardization of these. * inv_mpu6050 - Various lttle tidyups. - Simpliy I2C aux MUX handling by enabling it only at startup. It never needs to be disabled. - Simplify polling rate when magnetometer enabled by putting only under control of userspace. - Always execute full reset on devices supporting spi. It does no harm when using i2c and makes for simpler code. - Reduce over the top sleep times for vddio regulator power up. - Greatly simplify power and engine management. - Fix some delays in polled reads (only visible due to other changes) - Stop preventing sampling rate changes whilst running as there is no adverse consequence of doing so. - Prevent attempting to read the temperature if neither accel nor gyro is enabled. * lmp9100 - Reorder actions around buffer setup and tear down as part of a sub-system wide standardization of these. * max1118 - Use new SPI transfer delay structure. * mcp320x - Use new SPI transfer delay structure. * si1133 - Read full 24 bit signed integer instead o dropping last 8 bits of value. Not a critical fix as just adds precision. * st_sensors - Use st_sensors_dev_name_probe instead of open coded version in st_accel - Handle potential memory allocation failure. * st_lsm6dsx - Fix some wrong structure element naming in documentation. - Add missing return value check. * stm32_timer_cnt - Drop some unused left over IIO headers from this count subsystem driver. - Ensure the clock is enabled in master mode. Theoretical issue rather than one known to happen in the wild. * tlc4541 - Use new SPI delay structure. * tag 'iio-5.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (98 commits) iio: dac: Kconfig: sort symbols alphabetically iio: light: gp2ap020a00f: fix iio_triggered_buffer_{predisable,postenable} positions iio: potentiostat: lmp9100: fix iio_triggered_buffer_{predisable,postenable} positions iio: trigger: stm32-timer: add power management support iio: trigger: stm32-timer: rename enabled flag iio: add a TODO counter: 104-quad-8: Support Differential Encoder Cable Status counter: 104-quad-8: Support Filter Clock Prescaler iio: pressure: icp10100: add driver for InvenSense ICP-101xx iio: industrialio-core: Fix debugfs read iio: imu: adis: add a note better explaining state_lock iio: imu: adis: update 'adis_data' struct doc-string iio: imu: adis: add doc-string for 'adis' struct iio: imu: adis_buffer: Use new structure for SPI transfer delays iio: adc: ti-tlc4541: Use new structure for SPI transfer delays iio: adc: mcp320x: Use new structure for SPI transfer delays iio: adc: max1118: Use new structure for SPI transfer delays iio: adc: ad9292: Use new structure for SPI transfer delays iio: adc: exynos: Silence warning about regulators during deferred probe staging: iio: update TODO ...
2020-03-18intel_th: pci: Add Elkhart Lake CPU supportAlexander Shishkin
This adds support for the Trace Hub in Elkhart Lake CPU. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200317062215.15598-7-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18intel_th: Fix user-visible error codesAlexander Shishkin
There are a few places in the driver that end up returning ENOTSUPP to the user, replace those with EINVAL. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: ba82664c134ef ("intel_th: Add Memory Storage Unit driver") Cc: stable@vger.kernel.org # v4.4+ Link: https://lore.kernel.org/r/20200317062215.15598-6-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18intel_th: msu: Fix the unexpected state warningAlexander Shishkin
The unexpected state warning should only warn on illegal state transitions. Fix that. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: 615c164da0eb4 ("intel_th: msu: Introduce buffer interface") Cc: stable@vger.kernel.org # v5.4+ Link: https://lore.kernel.org/r/20200317062215.15598-5-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18stm class: sys-t: Fix the use of time_after()Alexander Shishkin
The operands of time_after() are in a wrong order in both instances in the sys-t driver. Fix that. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: 39f10239df75 ("stm class: p_sys-t: Add support for CLOCKSYNC packets") Fixes: d69d5e83110f ("stm class: Add MIPI SyS-T protocol support") Cc: stable@vger.kernel.org # v4.20+ Link: https://lore.kernel.org/r/20200317062215.15598-3-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18Merge tag 'iio-fixes-for-5.6a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes in the 5.6 cycle. * adxl372 - Fix marking of buffered values as big endian. * ak8974 - Fix wrong handling of negative values when read from sysfs. * at91-sama5d2 - Fix differential mode by ensuring configuration set correctly. * ping - Use the write sensor type for of_ping_match table. * sps30 - Kconfig build dependency fix. * st-sensors - Fix a wrong identification of which part the SMO8840 ACPI ID indicates. * stm32-dsfdm - Fix a sleep in atomic issue by not using a trigger when it makes no sense. * stm32-timer - Make sure master mode is disabled when stopping. * vcnl400 - Update some sampling periods based on new docs. * tag 'iio-fixes-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: ping: set pa_laser_ping_cfg in of_ping_match iio: chemical: sps30: fix missing triggered buffer dependency iio: st_sensors: remap SMO8840 to LIS2DH12 iio: light: vcnl4000: update sampling periods for vcnl4040 iio: light: vcnl4000: update sampling periods for vcnl4200 iio: accel: adxl372: Set iio_chan BE iio: magnetometer: ak8974: Fix negative raw values in sysfs iio: trigger: stm32-timer: disable master mode when stopping iio: adc: stm32-dfsdm: fix sleep in atomic context iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
generated by cgit (git 2.34.1) at 2025-09-13 06:39:03 +0000