summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-12-22cxl: Compute the entire CXL path latency and bandwidth dataDave Jiang
CXL Memory Device SW Guide [1] rev1.0 2.11.2 provides instruction on how to calculate latency and bandwidth for CXL memory device. Calculate minimum bandwidth and total latency for the path from the CXL device to the root port. The QTG id is retrieved by providing the performance data as input and calling the root port callback ->get_qos_class(). The retrieved id is stored with the cxl_port of the CXL device. For example for a device that is directly attached to a host bus: Total Latency = Device Latency (from CDAT) + Dev to Host Bus (HB) Link Latency + Generic Port Latency Min Bandwidth = Min bandwidth for link bandwidth between HB and CXL device, device CDAT bandwidth, and Generic Port Bandwidth For a device that has a switch in between host bus and CXL device: Total Latency = Device (CDAT) Latency + Dev to Switch Link Latency + Switch (CDAT) Latency + Switch to HB Link Latency + Generic Port Latency Min Bandwidth = Min bandwidth for link bandwidth between CXL device to CXL switch, CXL device CDAT bandwidth, CXL switch CDAT bandwidth, CXL switch to HB bandwidth, and Generic Port Bandwidth. [1]: https://cdrdv2-public.intel.com/643805/643805_CXL%20Memory%20Device%20SW%20Guide_Rev1p0.pdf Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/170319624458.2212653.13252496567443656371.stgit@djiang5-mobl3 Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-12-22cxl: Add helper function that calculate performance data for downstream portsDave Jiang
The CDAT information from the switch, Switch Scoped Latency and Bandwidth Information Structure (SSLBIS), is parsed and stored under a cxl_dport based on the correlated downstream port id from the SSLBIS entry. Walk the entire CXL port paths and collect all the performance data. Also pick up the link latency number that's stored under the dports. The entire path PCIe bandwidth can be retrieved using the pcie_bandwidth_available() call. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/170319623824.2212653.10302079766473698427.stgit@djiang5-mobl3 Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-12-22cxl: Store the access coordinates for the generic portsDave Jiang
Each CXL host bridge is represented by an ACPI0016 device. A generic port device handle that is an ACPI device is represented by a string of ACPI0016 device HID and UID. Create a device handle from the ACPI device and retrieve the access coordinates from the stored memory targets. The access coordinates are stored under the cxl_dport that is associated with the CXL host bridge. The access coordinates struct is dynamically allocated under cxl_dport in order for code later on to detect whether the data exists or not. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/170319623196.2212653.17916695743464172534.stgit@djiang5-mobl3 Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-12-22cxl: Calculate and store PCI link latency for the downstream portsDave Jiang
The latency is calculated by dividing the flit size over the bandwidth. Add support to retrieve the flit size for the CXL switch device and calculate the latency of the PCIe link. Cache the latency number with cxl_dport. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/170319621931.2212653.6800240203604822886.stgit@djiang5-mobl3 Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-12-22cxl: Add support for _DSM Function for retrieving QTG IDDave Jiang
CXL spec v3.0 9.17.3 CXL Root Device Specific Methods (_DSM) Add support to retrieve QTG ID via ACPI _DSM call. The _DSM call requires an input of an ACPI package with 4 dwords (read latency, write latency, read bandwidth, write bandwidth). The call returns a package with 1 WORD that provides the max supported QTG ID and a package that may contain 0 or more WORDs as the recommended QTG IDs in the recommended order. Create a cxl_root container for the root cxl_port and provide a callback ->get_qos_class() in order to retrieve the QoS class. For the ACPI case, the _DSM helper is used to retrieve the QTG ID and returned. A devm_cxl_add_root() function is added for root port setup and registration of the cxl_root callback operation(s). Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/170319621294.2212653.1649682083061569256.stgit@djiang5-mobl3 Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-12-22cxl: Add callback to parse the SSLBIS subtable from CDATDave Jiang
Provide a callback to parse the Switched Scoped Latency and Bandwidth Information Structure (SSLBIS) in the CDAT structures. The SSLBIS contains the bandwidth and latency information that's tied to the CXL switch that the data table has been read from. The extracted values are stored to the cxl_dport correlated by the port_id depending on the SSLBIS entry. Coherent Device Attribute Table 1.03 2.1 Switched Scoped Latency and Bandwidth Information Structure (DSLBIS) Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/170319620635.2212653.5194389158785365150.stgit@djiang5-mobl3 Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-12-22cxl: Add callback to parse the DSLBIS subtable from CDATDave Jiang
Provide a callback to parse the Device Scoped Latency and Bandwidth Information Structure (DSLBIS) in the CDAT structures. The DSLBIS contains the bandwidth and latency information that's tied to a DSMAS handle. The driver will retrieve the read and write latency and bandwidth associated with the DSMAS which is tied to a DPA range. Coherent Device Attribute Table 1.03 2.1 Device Scoped Latency and Bandwidth Information Structure (DSLBIS) Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/170319620005.2212653.7475488478229720542.stgit@djiang5-mobl3 Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-12-22cxl: Add callback to parse the DSMAS subtables from CDATDave Jiang
Provide a callback function to the CDAT parser in order to parse the Device Scoped Memory Affinity Structure (DSMAS). Each DSMAS structure contains the DPA range and its associated attributes in each entry. See the CDAT specification for details. The device handle and the DPA range is saved and to be associated with the DSLBIS locality data when the DSLBIS entries are parsed. The xarray is a local variable. When the total path performance data is calculated and storred this xarray can be discarded. Coherent Device Attribute Table 1.03 2.1 Device Scoped memory Affinity Structure (DSMAS) Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/170319619355.2212653.2675953129671561293.stgit@djiang5-mobl3 Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-12-22acpi: numa: Add helper function to retrieve the performance attributesDave Jiang
Add helper to retrieve the performance attributes based on the device handle. The helper function is exported so the CXL driver can use that to acquire the performance data between the CPU and the CXL host bridge. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/170319618721.2212653.5552947472849081786.stgit@djiang5-mobl3 Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-12-22acpi: numa: Add setting of generic port system locality attributesDave Jiang
Add generic port support for the parsing of HMAT system locality sub-table. The attributes will be added to the third array member of the access coordinates in order to not mix with the existing memory attributes. It only provides the system locality attributes from initiator to the generic port targets and is missing the rest of the data to the actual memory device. The complete attributes will be updated when a memory device is attached and the system locality information is calculated end to end. Through hmat_update_target_attrs(), the best performance attributes will be setup in target->coord. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/170319618135.2212653.13778540010384821833.stgit@djiang5-mobl3 Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-12-22acpi: Break out nesting for hmat_parse_locality()Dave Jiang
Refactor hmat_parse_locality() to break up the deep nesting of the function. Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/170319617537.2212653.10625501075519862509.stgit@djiang5-mobl3 Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-12-22acpi: numa: Add genport target allocation to the HMAT parsingDave Jiang
Add SRAT parsing for the HMAT init in order to collect the device handle from the Generic Port Affinity Structure. The device handle will serve as the key to search for target data. Consolidate the common code with alloc_memory_target() in a helper function alloc_target(). Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/170319616951.2212653.14862375982250406464.stgit@djiang5-mobl3 Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-12-22acpi: numa: Create enum for memory_target access coordinates indexingDave Jiang
Create enums to provide named indexing for the access coordinate array. This is in preparation for adding generic port support which will add a third index in the array to keep the generic port attributes separate from the memory attributes. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/170319616332.2212653.3872789279950567889.stgit@djiang5-mobl3 Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-12-22base/node / acpi: Change 'node_hmem_attrs' to 'access_coordinates'Dave Jiang
Dan Williams suggested changing the struct 'node_hmem_attrs' to 'access_coordinates' [1]. The struct is a container of r/w-latency and r/w-bandwidth numbers. Moving forward, this container will also be used by CXL to store the performance characteristics of each link hop in the PCIE/CXL topology. So, where node_hmem_attrs is just the access parameters of a memory-node, access_coordinates applies more broadly to hardware topology characteristics. The observation is that seemed like an exercise in having the application identify "where" it falls on a spectrum of bandwidth and latency needs. For the tuple of read/write-latency and read/write-bandwidth, "coordinates" is not a perfect fit. Sometimes it is just conveying values in isolation and not a "location" relative to other performance points, but in the end this data is used to identify the performance operation point of a given memory-node. [2] Link: http://lore.kernel.org/r/64471313421f7_1b66294d5@dwillia2-xfh.jf.intel.com.notmuch/ Link: https://lore.kernel.org/linux-cxl/645e6215ee0de_1e6f2945e@dwillia2-xfh.jf.intel.com.notmuch/ Suggested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/170319615734.2212653.15319394025985499185.stgit@djiang5-mobl3 Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-12-22lib/firmware_table: tables: Add CDAT table parsing supportDave Jiang
The CDAT table is very similar to ACPI tables when it comes to sub-table and entry structures. The helper functions can be also used to parse the CDAT table. Add support to the helper functions to deal with an external CDAT table, and also handle the endieness since CDAT can be processed by a BE host. Export a function cdat_table_parse() for CXL driver to parse a CDAT table. In order to minimize ACPICA code changes, __force is being utilized to deal with the case of a big endian (BE) host parsing a CDAT. All CDAT data structure variables are being force casted to __leX as appropriate. Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Len Brown <lenb@kernel.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/170319615131.2212653.10932785667981494238.stgit@djiang5-mobl3 Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-12-22HID: sensor-hub: Enable hid core report processing for all devicesYauhen Kharuzhy
After the commit 666cf30a589a ("HID: sensor-hub: Allow multi-function sensor devices") hub devices are claimed by hidraw driver in hid_connect(). This causes stoppping of processing HID reports by hid core due to optimization. In such case, the hid-sensor-custom driver cannot match a known custom sensor in hid_sensor_custom_get_known() because it try to check custom properties which weren't filled from the report because hid core didn't parsed it. As result, custom sensors like hinge angle sensor and LISS sensors don't work. Mark the sensor hub devices claimed by some driver to avoid hidraw-related optimizations. Fixes: 666cf30a589a ("HID: sensor-hub: Allow multi-function sensor devices") Cc: stable@vger.kernel.org Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20231219231503.1506801-1-jekhor@gmail.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2023-12-22Bluetooth: Add device 13d3:3572 IMC Networks Bluetooth RadioJagan Teki
This 13d3:3572 is part of Realtek RTW8852BE chip. The device table is: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3572 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Jagan Teki <jagan@edgeble.ai> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22Bluetooth: btnxpuart: remove useless assignmentFrancesco Dolcini
Remove useless assignment of rx_skb to NULL in case the skb is in error, this is already done in h4_recv_buf() that is executed a few lines before. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22Bluetooth: btmtkuart: fix recv_buf() return valueFrancesco Dolcini
Serdev recv_buf() callback is supposed to return the amount of bytes consumed, therefore an int in between 0 and count. Do not return negative number in case of issue, just print an error and return count. This fixes a WARN in ttyport_receive_buf(). Link: https://lore.kernel.org/all/087be419-ec6b-47ad-851a-5e1e3ea5cfcc@kernel.org/ Fixes: 7237c4c9ec92 ("Bluetooth: mediatek: Add protocol support for MediaTek serial devices") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22Bluetooth: btnxpuart: fix recv_buf() return valueFrancesco Dolcini
Serdev recv_buf() callback is supposed to return the amount of bytes consumed, therefore an int in between 0 and count. Do not return a negative number in case of issue, just print an error and return count. Before this change, in case of error, the returned negative number was internally converted to 0 in ttyport_receive_buf, now when the receive buffer is corrupted we return the size of the whole received data (`count`). This should allow for better recovery in case receiver/transmitter get out of sync if some data is lost. This fixes a WARN in ttyport_receive_buf(). Bluetooth: hci0: Frame reassembly failed (-84) ------------[ cut here ]------------ serial serial0: receive_buf returns -84 (count = 6) WARNING: CPU: 0 PID: 37 at drivers/tty/serdev/serdev-ttyport.c:37 ttyport_receive_buf+0xd8/0xf8 Modules linked in: mwifiex_sdio(+) ... CPU: 0 PID: 37 Comm: kworker/u4:2 Not tainted 6.7.0-rc2-00147-gf1a09972a45a #1 Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT) Workqueue: events_unbound flush_to_ldisc pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ttyport_receive_buf+0xd8/0xf8 lr : ttyport_receive_buf+0xd8/0xf8 ... Call trace: ttyport_receive_buf+0xd8/0xf8 flush_to_ldisc+0xbc/0x1a4 process_scheduled_works+0x16c/0x28c Closes: https://lore.kernel.org/all/ZWEIhcUXfutb5SY6@francesco-nb.int.toradex.com/ Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22Bluetooth: qca: Support HFP offload for QCA2066Zijun Hu
For QCA2066 HFP offload, HCI_Configure_Data_Path is not required since present HCI_Enhanced_Setup_Synchronous_Connection is enough to configure non-HCI data transport path when set both Input_Data_Path and Output_Data_Path parameters as 0x01, as is implemented by this change. Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22Bluetooth: btintel: Print firmware SHA1Kiran K
Intel Read Version event contains a TLV(0x32) having firmware sha1 in operational image. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22Bluetooth: btusb: Don't suspend when there are connectionsLuiz Augusto von Dentz
This checks if there are connections before suspending since that may disrupt the connections making it stop receiving any data if remote wakeup is not enabled. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22Bluetooth: qca: Set both WIDEBAND_SPEECH and LE_STATES quirks for QCA2066Zijun Hu
Set both WIDEBAND_SPEECH_SUPPORTED and VALID_LE_STATES quirks for QCA2066. Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22Merge tag 'i2c-for-6.7-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - error path fixes (qcom-geni) - polling mode fix (rk3x) - target mode state machine fix (aspeed) * tag 'i2c-for-6.7-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: aspeed: Handle the coalesced stop conditions with the start conditions. i2c: rk3x: fix potential spinlock recursion on poll i2c: qcom-geni: fix missing clk_disable_unprepare() and geni_se_resources_off()
2023-12-22Merge tag 'gpio-fixes-for-v6.7-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "Here's another round of fixes from the GPIO subsystem for this release cycle. There's one commit adding synchronization to an ioctl() we overlooked previously and another synchronization changeset for one of the drivers: - add protection against GPIO device removal to an overlooked ioctl() - synchronize the interrupt mask register manually in gpio-dwapb" * tag 'gpio-fixes-for-v6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: dwapb: mask/unmask IRQ when disable/enale it gpiolib: cdev: add gpio_device locking wrapper around gpio_ioctl()
2023-12-22Merge tag 'drm-fixes-2023-12-22' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Pretty quiet for this week, just i915 and amdgpu fixes, I think the misc tree got lost this week, but didn't seem to have too much in it, so it can wait. I've also got a bunch of nouveau GSP fixes sailing around that'll probably land next time as well. amdgpu: - DCN 3.5 fixes - DCN 3.2 SubVP fix - GPUVM fix amdkfd: - SVM fix for APUs i915: - Fix state readout and check for DSC and bigjoiner combo - Fix a potential integer overflow - Reject async flips with bigjoiner - Fix MTL HDMI/DP PLL clock selection - Fix various issues by disabling pipe DMC events" * tag 'drm-fixes-2023-12-22' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: re-create idle bo's PTE during VM state machine reset drm/amd/display: dereference variable before checking for zero drm/amd/display: get dprefclk ss info from integration info table drm/amd/display: Add case for dcn35 to support usb4 dmub hpd event drm/amd/display: disable FPO and SubVP for older DMUB versions on DCN32x drm/amdkfd: svm range always mapped flag not working on APU drm/amd/display: Revert " drm/amd/display: Use channel_width = 2 for vram table 3.0" drm/i915/dmc: Don't enable any pipe DMC events drm/i915/mtl: Fix HDMI/DP PLL clock selection drm/i915: Reject async flips with bigjoiner drm/i915/hwmon: Fix static analysis tool reported issues drm/i915/display: Get bigjoiner config before dsc config during readout
2023-12-22phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J784S4Chintan Vankar
Enable full rate divider configuration support for J784S4_WIZ_10G for SGMII. Signed-off-by: Chintan Vankar <c-vankar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20231221102956.754617-2-c-vankar@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-22phy: ti: gmii-sel: Enable SGMII mode for J784S4Chintan Vankar
TI's J784S4 SoC supports SGMII mode with the CPSW9G instance of the CPSW Ethernet Switch. Thus, enable it by adding SGMII mode to the list of the corresponding extra_modes member. Signed-off-by: Chintan Vankar <c-vankar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20231221102956.754617-1-c-vankar@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-22dmaengine: xilinx: xdma: statify xdma_prep_interleaved_dmaVinod Koul
xdma_prep_interleaved_dma() was local to file but not declared static, leading to warning: drivers/dma/xilinx/xdma.c:729:1: warning: no previous prototype for 'xdma_prep_interleaved_dma' [-Wmissing-prototypes] 729 | xdma_prep_interleaved_dma(struct dma_chan *chan Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20231222094001.731889-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-22dmaengine: xilinx: xdma: Workaround truncation compilation errorVinod Koul
Increase length to be copied to be large enough to overcome the following compilation error. The buf is large enough for this purpose. drivers/dma/xilinx/xilinx_dpdma.c: In function ‘xilinx_dpdma_debugfs_desc_done_irq_read’: drivers/dma/xilinx/xilinx_dpdma.c:313:39: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=] 313 | snprintf(buf, out_str_len, "%d", | ^ drivers/dma/xilinx/xilinx_dpdma.c:313:9: note: ‘snprintf’ output between 2 and 6 bytes into a destination of size 5 313 | snprintf(buf, out_str_len, "%d", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 314 | dpdma_debugfs.xilinx_dpdma_irq_done_count); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20231222094017.731917-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-22drbd: actlog: fix kernel-doc warnings and spellingRandy Dunlap
Fix all kernel-doc warnings in drbd_actlog.c: drbd_actlog.c:963: warning: No description found for return value of 'drbd_rs_begin_io' drbd_actlog.c:1015: warning: Function parameter or member 'peer_device' not described in 'drbd_try_rs_begin_io' drbd_actlog.c:1015: warning: Excess function parameter 'device' description in 'drbd_try_rs_begin_io' drbd_actlog.c:1015: warning: No description found for return value of 'drbd_try_rs_begin_io' drbd_actlog.c:1197: warning: No description found for return value of 'drbd_rs_del_all' Fix one spelling error (s/ore/or/). Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Cc: <drbd-dev@lists.linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: <linux-block@vger.kernel.org> Link: https://lore.kernel.org/r/20231222061909.8791-1-rdunlap@infradead.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-12-22octeontx2-af: Fix a double free issueSuman Ghosh
There was a memory leak during error handling in function npc_mcam_rsrcs_init(). Fixes: dd7842878633 ("octeontx2-af: Add new devlink param to configure maximum usable NIX block LFs") Suggested-by: Simon Horman <horms@kernel.org> Signed-off-by: Suman Ghosh <sumang@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-22Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== intel: use bitfield operations Jesse Brandeburg says: After repeatedly getting review comments on new patches, and sporadic patches to fix parts of our drivers, we should just convert the Intel code to use FIELD_PREP() and FIELD_GET(). It's then "common" in the code and hopefully future change-sets will see the context and do-the-right-thing. This conversion was done with a coccinelle script which is mentioned in the commit messages. Generally there were only a couple conversions that were "undone" after the automatic changes because they tried to convert a non-contiguous mask. Patch 1 is required at the beginning of this series to fix a "forever" issue in the e1000e driver that fails the compilation test after conversion because the shift / mask was out of range. The second patch just adds all the new #includes in one go. The patch titled: "ice: fix pre-shifted bit usage" is needed to allow the use of the FIELD_* macros and fix up the unexpected "shifts included" defines found while creating this series. The rest are the conversion to use FIELD_PREP()/FIELD_GET(), and the occasional leXX_{get,set,encode}_bits() call, as suggested by Alex. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-22Merge tag 'nand/for-6.8' into mtd/nextMiquel Raynal
* Raw NAND The most meaningful change being the conversion of the brcmnand driver to the ->exec_op() API, this series brought additional changes to the core in order to help controller drivers to handle themselves the WP pin during destructive operations when relevant. As always, there is as well a whole bunch of miscellaneous W=1 fixes, together with a few runtime fixes (double free, timeout value, OOB layout, missing register initialization) and the usual load of remove callbacks turned into void (which led to switch the txx9ndfmc driver to use module_platform_driver()).
2023-12-22Merge tag 'spi-nor/for-6.8' into mtd/nextMiquel Raynal
SPI NOR comes with die erase support for multi die flashes, with new octal protocols (1-1-8 and 1-8-8) parsed from SFDP and with an updated documentation about what the contributors shall consider when proposing flash additions or updates. Michael Walle stepped out from the reviewer role to maintainer.
2023-12-22mtd: rawnand: Clarify conditions to enable continuous readsMiquel Raynal
The current logic is probably fine but is a bit convoluted. Plus, we don't want partial pages to be part of the sequential operation just in case the core would optimize the page read with a subpage read (which would break the sequence). This may happen on the first and last page only, so if the start offset or the end offset is not aligned with a page boundary, better avoid them to prevent any risk. Cc: stable@vger.kernel.org Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Martin Hundebøll <martin@geanix.com> Link: https://lore.kernel.org/linux-mtd/20231215123208.516590-5-miquel.raynal@bootlin.com
2023-12-22mtd: rawnand: Prevent sequential reads with on-die ECC enginesMiquel Raynal
Some devices support sequential reads when using the on-die ECC engines, some others do not. It is a bit hard to know which ones will break other than experimentally, so in order to avoid such a difficult and painful task, let's just pretend all devices should avoid using this optimization when configured like this. Cc: stable@vger.kernel.org Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Martin Hundebøll <martin@geanix.com> Link: https://lore.kernel.org/linux-mtd/20231215123208.516590-4-miquel.raynal@bootlin.com
2023-12-22mtd: rawnand: Fix core interference with sequential readsMiquel Raynal
A couple of reports pointed at some strange failures happening a bit randomly since the introduction of sequential page reads support. After investigation it turned out the most likely reason for these issues was the fact that sometimes a (longer) read might happen, starting at the same page that was read previously. This is optimized by the raw NAND core, by not sending the READ_PAGE command to the NAND device and just reading out the data in a local cache. When this page is also flagged as being the starting point for a sequential read, it means the page right next will be accessed without the right instructions. The NAND chip will be confused and will not output correct data. In order to avoid such situation from happening anymore, we can however handle this case with a bit of additional logic, to postpone the initialization of the read sequence by one page. Reported-by: Alexander Shiyan <eagle.alexander923@gmail.com> Closes: https://lore.kernel.org/linux-mtd/CAP1tNvS=NVAm-vfvYWbc3k9Cx9YxMc2uZZkmXk8h1NhGX877Zg@mail.gmail.com/ Reported-by: Måns Rullgård <mans@mansr.com> Closes: https://lore.kernel.org/linux-mtd/yw1xfs6j4k6q.fsf@mansr.com/ Reported-by: Martin Hundebøll <martin@geanix.com> Closes: https://lore.kernel.org/linux-mtd/9d0c42fcde79bfedfe5b05d6a4e9fdef71d3dd52.camel@geanix.com/ Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Martin Hundebøll <martin@geanix.com> Link: https://lore.kernel.org/linux-mtd/20231215123208.516590-3-miquel.raynal@bootlin.com
2023-12-22mtd: rawnand: Prevent crossing LUN boundaries during sequential readsMiquel Raynal
The ONFI specification states that devices do not need to support sequential reads across LUN boundaries. In order to prevent such event from happening and possibly failing, let's introduce the concept of "pause" in the sequential read to handle these cases. The first/last pages remain the same but any time we cross a LUN boundary we will end and restart (if relevant) the sequential read operation. Cc: stable@vger.kernel.org Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Martin Hundebøll <martin@geanix.com> Link: https://lore.kernel.org/linux-mtd/20231215123208.516590-2-miquel.raynal@bootlin.com
2023-12-22Merge tag 'tee-iov-iter-for-v6.8' of ↵Arnd Bergmann
https://git.linaro.org/people/jens.wiklander/linux-tee into soc/drivers TEE: improve shared buffer registration compatibility * tag 'tee-iov-iter-for-v6.8' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: Use iov_iter to better support shared buffer registration Link: https://lore.kernel.org/r/20231214134139.GA3098718@rayden Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-22Merge tag 'optee-cleanup-for-v6.8' of ↵Arnd Bergmann
https://git.linaro.org/people/jens.wiklander/linux-tee into soc/drivers OP-TEE cleanup - Remove a redundant custom workqueue in the OP-TEE driver. - Fix a missing description of an argument to optee_handle_rpc(). * tag 'optee-cleanup-for-v6.8' of https://git.linaro.org/people/jens.wiklander/linux-tee: optee: add missing description of RPC argument reference tee: optee: Remove redundant custom workqueue tee: optee: Fix supplicant based device enumeration Link: https://lore.kernel.org/r/20231214132237.GA3092763@rayden Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-22Merge tag 'reset-for-v6.8' of git://git.pengutronix.de/pza/linux into ↵Arnd Bergmann
soc/drivers Reset controller updates for v6.8 Make use of devm_platform_get_and_ioremap_resource() and device_get_match_data() in several drivers, support the Amlogic C3 reset controller, and improve various device tree binding documents. * tag 'reset-for-v6.8' of git://git.pengutronix.de/pza/linux: dt-bindings: reset: hisilicon,hi3660-reset: Drop providers and consumers from example dt-bindings: reset: imx-src: Simplify compatible schema and drop unneeded quotes dt-bindings: reset: qcom: drop unneeded quotes dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/Five SoC reset: Use device_get_match_data() reset: reset-meson: add support for Amlogic C3 SoC Reset Controller dt-bindings: reset: Add compatible and DT bindings for Amlogic C3 Reset Controller reset: uniphier-glue: Use devm_platform_get_and_ioremap_resource() reset: sunplus: Use devm_platform_get_and_ioremap_resource() reset: simple: Convert to devm_platform_get_and_ioremap_resource() reset: qcom: Convert to devm_platform_ioremap_resource() reset: qcom-aoss: Convert to devm_platform_ioremap_resource() reset: meson-audio-arb: Convert to devm_platform_ioremap_resource() reset: brcmstb: Use devm_platform_get_and_ioremap_resource() Link: https://lore.kernel.org/r/20231213153313.278867-1-p.zabel@pengutronix.de Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-22Merge tag 'scmi-updates-6.8' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers Arm SCMI updates for v6.8 Few minor updates: 1. Addition of protocol versioning checks to warn if the firmware version is newer or greater than the version supported by the kernel driver 2. Increment of the maximum OPP count in the perf protocol from 16 to 32 as needed by a few recent/future qualcomm platforms 3. Optimisation of set performance operations by returning error immediately and avoiding to send the command to the platform(which would return error eventually) if the domain doesn't support perf operations. Similarly, the fastchannel handling is also optimised by avoiding to initialise the corresponding set operations fastchannels. 4. Extension of extended names helper to accomodate recently added new flags parameter to be able to properly configure the command used to query the extended name of a resource. * tag 'scmi-updates-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Add protocol versioning checks firmware: arm_scmi: Increase the maximum opp count in the perf protocol firmware: arm_scmi: Fix NULL pointer dereference during fastchannel init firmware: arm_scmi: Add optional flags to extended names helper firmware: arm_scmi: Populate fastchannel info only if set operations are allowed firmware: arm_scmi: Check beforehand if the perf domain set operations are allowed Link: https://lore.kernel.org/r/20231213115953.3578115-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-22mtd: Fix gluebi NULL pointer dereference caused by ftl notifierZhaoLong Wang
If both ftl.ko and gluebi.ko are loaded, the notifier of ftl triggers NULL pointer dereference when trying to access ‘gluebi->desc’ in gluebi_read(). ubi_gluebi_init ubi_register_volume_notifier ubi_enumerate_volumes ubi_notify_all gluebi_notify nb->notifier_call() gluebi_create mtd_device_register mtd_device_parse_register add_mtd_device blktrans_notify_add not->add() ftl_add_mtd tr->add_mtd() scan_header mtd_read mtd_read_oob mtd_read_oob_std gluebi_read mtd->read() gluebi->desc - NULL Detailed reproduction information available at the Link [1], In the normal case, obtain gluebi->desc in the gluebi_get_device(), and access gluebi->desc in the gluebi_read(). However, gluebi_get_device() is not executed in advance in the ftl_add_mtd() process, which leads to NULL pointer dereference. The solution for the gluebi module is to run jffs2 on the UBI volume without considering working with ftl or mtdblock [2]. Therefore, this problem can be avoided by preventing gluebi from creating the mtdblock device after creating mtd partition of the type MTD_UBIVOLUME. Fixes: 2ba3d76a1e29 ("UBI: make gluebi a separate module") Link: https://bugzilla.kernel.org/show_bug.cgi?id=217992 [1] Link: https://lore.kernel.org/lkml/441107100.23734.1697904580252.JavaMail.zimbra@nod.at/ [2] Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Acked-by: Richard Weinberger <richard@nod.at> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231220024619.2138625-1-wangzhaolong1@huawei.com
2023-12-22Merge tag 'memory-controller-drv-6.8-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers Memory controller drivers for v6.8, part two Convert all drivers platform remove callback to the "remove_new" which returns void. Usual rationale from Uwe: The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. * tag 'memory-controller-drv-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: memory: ti-emif-pm: Convert to platform remove callback returning void memory: ti-aemif: Convert to platform remove callback returning void memory: tegra210-emc: Convert to platform remove callback returning void memory: tegra186-emc: Convert to platform remove callback returning void memory: stm32-fmc2-ebi: Convert to platform remove callback returning void memory: exynos5422-dmc: Convert to platform remove callback returning void memory: renesas-rpc-if: Convert to platform remove callback returning void memory: omap-gpmc: Convert to platform remove callback returning void memory: mtk-smi: Convert to platform remove callback returning void memory: jz4780-nemc: Convert to platform remove callback returning void memory: fsl_ifc: Convert to platform remove callback returning void memory: fsl-corenet-cf: Convert to platform remove callback returning void memory: emif: Convert to platform remove callback returning void memory: brcmstb_memc: Convert to platform remove callback returning void memory: brcmstb_dpfe: Convert to platform remove callback returning void Link: https://lore.kernel.org/r/20231221101956.16351-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-22Merge tag 'memory-controller-drv-6.8' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers Memory controller drivers for v6.8 Few improvements for Tegra Memory Controller: Override the SID programming in the device, if firmware or bootloader left it in bypass mode, e.g. after resuming from suspend. Skip prorgamming the SID, if given Memory Controller client does not support it. * tag 'memory-controller-drv-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: memory: tegra: Protect SID override call under CONFIG_IOMMU_API memory: tegra: Skip SID programming if SID registers aren't set memory: tegra: Add SID override programming for MC clients Link: https://lore.kernel.org/r/20231213061523.4803-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-22Merge tag 'riscv-cache-for-v6.8' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers RISC-V cache drivers for v6.8 The SiFive composable cache driver moves to the cache driver subdirectory from the drivers/soc and grows support for non-coherent cache operations. The immediate user for these is the jh7100 SoC, that a rake of people have on VisionFive v1 or Beagle-V Starlight boards. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-cache-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: errata: Make ERRATA_STARFIVE_JH7100 depend on !DMA_DIRECT_REMAP riscv: errata: Add StarFive JH7100 errata soc: sifive: ccache: Add StarFive JH7100 support dt-bindings: cache: sifive,ccache0: Add StarFive JH7100 compatible soc: sifive: shunt ccache driver to drivers/cache Link: https://lore.kernel.org/r/20231221-catatonic-monday-d4c61283b136@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-22Merge tag 'riscv-soc-drivers-for-v6.8' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers RISC-V SoC drivers for v6.8 There's only one set of changes here, the addition of "Auto Update" support for PolarFire SoC. Auto Update is one of the ways that the FPGA bitstream can be updated, and the only one suitable for use from Linux as it does not immediately initiate a reboot when started. The driver was not accepted in the FPGA manager subsystem as the update only occurs after a reboot and makes no use of the FPGA manager framework. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-soc-drivers-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: MAINTAINERS: add auto-update driver to mpfs entry firmware: microchip: Replace of_device.h with explicit include firmware: microchip: add PolarFire SoC Auto Update support soc: microchip: mpfs: add auto-update subdev to system controller soc: microchip: mpfs: print service status in warning message soc: microchip: mpfs: enable access to the system controller's flash dt-bindings: soc: microchip: add a property for system controller flash firmware_loader: Expand Firmware upload error codes with firmware invalid error Link: https://lore.kernel.org/r/20231221-droop-unblock-81e4fe14acee@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-22Merge tag 'amlogic-drivers-for-v6.8' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers Amlogic drivers changes for v6.8: - meson-sm: unmap out_base shmem in error path - meson-sm: use dev_groups attrs for sysfs entries * tag 'amlogic-drivers-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: firmware: meson-sm: unmap out_base shmem in error path firmware: meson_sm: refactor serial sysfs entry via dev_groups attrs Link: https://lore.kernel.org/r/a987f881-1c23-4528-9cb1-e5a875b7e7a8@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit (git 2.34.1) at 2025-09-26 18:48:09 +0000