| Age | Commit message (Collapse) | Author |
|---|
|
This is needed for killing the sched.h dependency on rcupdate.h, and
pid.h is a better place for this code anyways.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Trimming down sched.h dependencies: we dont't want to include more than
the base types.
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix virtual vs physical address confusion in Storage Class Memory
(SCM) block device driver.
- Fix saving and restoring of FPU kernel context, which could lead to
corruption of vector registers 8-15
- Update defconfigs
* tag 's390-6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390/vx: fix save/restore of fpu kernel context
s390/scm: fix virtual vs physical address confusion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are only a handful of bugfixes this time, which feels almost too
small, so I hope we are not missing something important.
- One more mediatek dts warning fix after the previous larger set,
this should finally result in a clean defconfig build.
- TI OMAP dts fixes for a spurious hang on am335x and invalid data on
DTA7
- One DTS fix for ethernet on Oriange Pi Zero (Allwinner H616)
- A regression fix for ti-sysc interconnect target module driver to
not access registers after reset if srst_udelay quirk is needed
- Reset controller driver fixes for a crash during error handling and
a build warning"
* tag 'soc-fixes-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: mediatek: mt8395-genio-1200-evk: add interrupt-parent for mt6360
ARM: dts: Fix occasional boot hang for am3 usb
reset: Fix crash when freeing non-existent optional resets
ARM: OMAP2+: Fix null pointer dereference and memory leak in omap_soc_device_init
ARM: dts: dra7: Fix DRA7 L3 NoC node register size
bus: ti-sysc: Flush posted write only after srst_udelay
reset: hisilicon: hi6220: fix Wvoid-pointer-to-enum-cast warning
arm64: dts: allwinner: h616: update emac for Orange Pi Zero 3
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
- Fan reporting on some ThinkPads
- Laptop 13 spurious keypresses while suspended
- Intel PMC correction to avoid crash
* tag 'platform-drivers-x86-v6.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd/pmc: Disable keyboard wakeup on AMD Framework 13
platform/x86/amd/pmc: Move keyboard wakeup disablement detection to pmc-quirks
platform/x86/amd/pmc: Only run IRQ1 firmware version check on Cezanne
platform/x86/amd/pmc: Move platform defines to header
platform/x86/intel/pmc: Fix hang in pmc_core_send_ltr_ignore()
platform/x86: thinkpad_acpi: fix for incorrect fan reporting on some ThinkPad systems
|
|
Correct kernel-doc comments in tsi721.c and tsi721_dma.c to prevent
warnings from scripts/kernel-doc.
tsi721_dma.c:293: warning: expecting prototype for tsi721_omsg_msix(). Prototype was for tsi721_bdma_msix() instead
tsi721.c:215: warning: Function parameter or member 'data' not described in 'tsi721_cread_dma'
tsi721.c:215: warning: Excess function parameter 'val' description in 'tsi721_cread_dma'
tsi721.c:238: warning: Function parameter or member 'data' not described in 'tsi721_cwrite_dma'
tsi721.c:238: warning: Excess function parameter 'val' description in 'tsi721_cwrite_dma'
tsi721.c:2548: warning: Function parameter or member 'attr' not described in 'tsi721_query_mport'
tsi721.c:2548: warning: Excess function parameter 'mbox' description in 'tsi721_query_mport'
and 27 warnings like this one:
tsi721.c:59: warning: No description found for return value of 'tsi721_lcread'
Link: https://lkml.kernel.org/r/20231206175528.16386-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- DM raid target (and MD raid) fix for reconfig_mutex MD deadlock that
should have been merged along with recent v6.7-rc6 MD fixes (see MD
related commits: f2d87a759f68^..b39113349de6)
- DM integrity target fix to avoid modifying immutable biovec in the
integrity_metadata() edge case where kmalloc fails.
- Fix drivers/md/Kconfig so DM_AUDIT depends on BLK_DEV_DM.
- Update DM entry in MAINTAINERS to remove stale info.
* tag 'dm-6.7/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
MAINTAINERS: remove stale info for DEVICE-MAPPER
dm audit: fix Kconfig so DM_AUDIT depends on BLK_DEV_DM
dm-integrity: don't modify bio's immutable bio_vec in integrity_metadata()
dm-raid: delay flushing event_work() after reconfig_mutex is released
|
|
Because some platform Bluetooth will have many background scan when idle.
And the frequently Bluetooth scan will break Wi-Fi traffic many times at
a short duration, it will make Wi-Fi throughput become lower. This patch
will shorter Bluetooth slot and adjust priority settings, make Wi-Fi can
have a more completed duration to do traffic.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231218061341.51255-12-pkshih@realtek.com
|
|
More readable on the coexistence log.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231218061341.51255-11-pkshih@realtek.com
|
|
Coexistence will set the RF parameter according to Wi-Fi link mode,
Wi-Fi/Bluetooth signal level, traffic direction, antenna type,
and is there Bluetooth connection exist or not. Bluetooth will notify
the current LNA level by scoreboard. If the setting not as expected,
coexistence will try to assign the correct level.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231218061341.51255-10-pkshih@realtek.com
|
|
In order to control RF LNA setting, need Bluetooth RSSI level information.
RSSI level separate Bluetooth RSSI to several level, so the mechanism can
assign a corresponding setting.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231218061341.51255-9-pkshih@realtek.com
|
|
To avoid Bluetooth reconnecting/pairing fail during Wi-Fi is link/scan,
especially the Bluetooth connect event after the platform restart/boot up.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231218061341.51255-8-pkshih@realtek.com
|
|
Including Wi-Fi RF mode to judge is Wi-Fi RF still on or off,
if Wi-Fi is RF off should set scoreboard to let Bluetooth know
Wi-Fi has gone. Every time the Wi-Fi radio state changed firmware
should force execute refresh the TDMA coexistence mechanism to
prevent incorrect mechanism runs at mismatch state. The coexistence
antenna/TDMA settings should consider what the Wi-Fi mode it is now,
this can help to solve some LPS transient state issue like A2DP
slightly glitch.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231218061341.51255-7-pkshih@realtek.com
|
|
This can help to debug the grant signal and antenna path control issue
during Wi-Fi power saving mode.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231218061341.51255-6-pkshih@realtek.com
|
|
BTG is a RF system type, it means Wi-Fi 2.4GHz and Bluetooth share RF gain
and antenna. The RF gain must control by Wi-Fi or Bluetooth in single side.
For example, if Bluetooth RX a very strong signal, then Bluetooth will
adjust to a lower gain. And Wi-Fi will also use the same gain to do RX,
then maybe the gain will not enough. This BTG control mechanism can do
some refine to this situation.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231218061341.51255-5-pkshih@realtek.com
|
|
Pre-AGC(Auto gain control) is a hardware mechanism, it will auto adjust
the RX gain for every packet, it can help to keep Wi-Fi signal on a well
RX quality. The coexistence will give advice to control the API and
monitor the settings by firmware report.
Also add function to check register, these registers were monitoring
by Wi-Fi firmware and report to coexistence driver periodically. This
can help to track whether these settings were taking effect or not.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231218061341.51255-4-pkshih@realtek.com
|
|
This information will use as judgment about how to set RF/HW parameters.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231218061341.51255-3-pkshih@realtek.com
|
|
The Wi-Fi firmware 29.29.X should use version 2 role info format. FDDT
mechanism version 5 use the same cell members to judge traffic situation,
don't need to add another new format.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231218061341.51255-2-pkshih@realtek.com
|
|
When compiling with gcc version 14.0.0 20231220 (experimental)
and W=1, I've noticed a bunch of four similar warnings like:
drivers/base/regmap/regmap-ram.c: In function '__regmap_init_ram':
drivers/base/regmap/regmap-ram.c:68:37: warning: 'kcalloc' sizes specified with
'sizeof' in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
68 | data->read = kcalloc(sizeof(bool), config->max_register + 1,
| ^~~~
Since 'n' and 'size' arguments of 'kcalloc()' are multiplied to
calculate the final size, their actual order doesn't affect the
result and so this is not a bug. But it's still worth to fix it.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://msgid.link/r/20231220175829.533700-1-dmantipov@yandex.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Recently an unused member was removed from struct cros_ec_pwm_device,
but the kernel doc wasn't adapted accordingly. Catch up and drop the
documentation, too.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312190757.O4M9dsln-lkp@intel.com/
Fixes: 6c4406ce609f ("pwm: cros-ec: Drop unused member from driver private data")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanup for 6.8
New device support
------------------
adi,hmc425a
* Add support for ADRF5740 attenuators. Minor changes to driver needed
alongside new IDs.
aosong,ags02ma
* New driver for this volatile organic compounds sensor.
bosch,bmp280
* Add BMP390 (small amount of refactoring + ID)
bosch,bmi323
* New driver to support the BMI323 6-axis IMU.
honeywell,hsc030pa
* New driver supporting a huge number of SSC and HSC series pressure and
temperature sensors.
isil,isl76682
* New driver for this simple Ambient Light sensor.
liteon,ltr390
* New driver for this ambient and ultraviolet light sensor.
maxim,max34408
* New driver to support the MAX34408 and MAX34409 current monitoring ADCs.
melexis,mlx90635
* New driver for this Infrared contactless temperature sensor.
mirochip,mcp9600
* New driver for this thermocouple EMF convertor.
ti,hdc3020
* New driver for this integrated relative humidity and temperature
sensor.
vishay,veml6075
* New driver for this UVA and UVB light sensor.
General features
----------------
Device properties
* Add fwnode_property_match_property_string() helper to allow matching
single value property against an array of predefined strings.
* Use fwnode_property_string_array_count() inside
fwnode_property_match_string() instead of open coding the same.
checkpatch.pl
* Add exclusion of __aligned() from a warning reducing false positives
on IIO drivers (and hopefully beyond)
IIO Features
------------
core
* New light channel modifiers for UVA and UVB.
* Add IIO_CHAN_INFO_TROUGH as counterpart to IIO_CHAN_INFO_PEAK so that
we can support device that keep running track of the lowest value they
have seen in similar fashion to the existing peak tracking.
adi,adis library
* Use spi cs inactive delay even when a burst reading is performed.
As it's now used every time, can centralize the handling in the SPI
setup code in the driver.
adi,ad2s1210
* Support for fixed-mode to this resolver driver where the A0 and A1
pins are hard wired to config mode in which case position and config
must be read from appropriate config registers.
* Support reset GPIO if present.
adi,ad5791
* Allow configuration of presence of external amplifier in DT binding.
adi,adis16400
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
adi,adis16475
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
bosch,bmp280
* Enable multiple chip IDs per family of devices.
rohm,bu27008
* Add an illuminance channel calculated from RGB and IR data.
Cleanup
-------
Minor white space, typos and tidy up not explicitly called out.
Core
* Check that the available_scan_masks array passed to the IIO core
by a driver is sensible by ensuring the entries are ordered so the
minimum number of channels is enabled in the earlier entries (as they
will be selected if sufficient for the requested channels).
* Document that the available_scan_masks infrastructure doesn't currently
handle masks that don't fit in a long int.
* Improve intensity documentation to reflect that there is no expectation
of sensible units (it's dependent on a frequency sensitivity curve)
Various
* Use new device_property_match_property_string() to replace open coded
versions of the same thing.
* Fix a few MAINTAINERS filenames.
* i2c_get_match_data() and spi_get_device_match_data() pushed into
more drivers reducing boilerplate handling.
* Some unnecessary headers removed.
* ACPI_PTR() removals. It's rarely worth using this.
adi,ad7091r (early part of a series adding device support - useful in
their own right)
* Pass iio_dev directly an event handler rather than relying
on broken use of dev_get_drvdata() as drvdata is never set in this driver.
* Make sure alert is turned on.
adi,ad9467 (general driver fixing up as precursor to iio-backend proposal
which is under review for 6.9)
* Fix reset gpio handling to match expected polarity.
* Always handle error codes from spi_writes.
* Add a driver instance local mutex to avoid some races.
* Fix scale setting to align with available scale values.
* Split array of chip_info structures up into named individual elements.
* Convert to regmap.
honeywell,mprls0025pa
* Drop now unnecessary type references in DT binding for properties in
pascals.
invensense,mpu6050
* Don't eat a potentially useful return value from regmap_bulk_write()
invensense,icm42600
* Use max macro to improve code readability and save a few lines.
liteon,ltrf216a
* Improve prevision of light intensity.
microchip,mcp3911
* Use cleanup.h magic.
qcom,spmi*
* Fix wrong descriptions of SPMI reg fields in bindings.
Other
----
mailmap
* Update for Matt Ranostay
* tag 'iio-for-6.8a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (83 commits)
iio: adc: ad7091r: Align arguments to function call parenthesis
iio: adc: ad7091r: Set alert bit in config register
iio: adc: ad7091r: Pass iio_dev to event handler
scripts: checkpatch: Add __aligned to the list of attribute notes
iio: chemical: add support for Aosong AGS02MA
dt-bindings: iio: chemical: add aosong,ags02ma
dt-bindings: vendor-prefixes: add aosong
iio: accel: bmi088: update comments and Kconfig
dt-bindings: iio: humidity: Add TI HDC302x support
iio: humidity: Add driver for ti HDC302x humidity sensors
iio: ABI: document temperature and humidity peak/trough raw attributes
iio: core: introduce trough info element for minimum values
iio: light: driver for Lite-On ltr390
dt-bindings: iio: light: add ltr390
iio: light: isl76682: remove unreachable code
iio: pressure: driver for Honeywell HSC/SSC series
dt-bindings: iio: pressure: add honeywell,hsc030
doc: iio: Document intensity scale as poorly defined
dt-bindings: iio: temperature: add MLX90635 device
iio: temperature: mlx90635 MLX90635 IR Temperature sensor
...
|
|
Even though the hardware only supports a single period for all PWM
outputs, modifying the other (disabled) outputs's period is strange and
wrong. Only the pwm core is supposed to update these values.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Using dev_err_probe() emitting an error message mentioning a return
value and returning that value can be done in a single statement. Make
use of that to simplify the probe part of the driver. This has the
additional advantage to emit the symbolic name for the error instead of
the integer error value.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
stmpe_reg_read() and stmpe_reg_write() already emit error messages when
they fail. So the extra error messages in the pwm driver are only little
useful. They are useful in some situation, as they give a bit of context
to the failing register write. So don't remove them but degrade them to
dev_dbg().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
pwm->chip and pwm->chip->ops are used several times in this function.
Introduce local variables for these.
There is no semantical change, but with ARCH=arm, allmodconfig and
gcc-13 bloat-o-meter reports a slight improvement:
add/remove: 1/1 grow/shrink: 1/1 up/down: 8/-36 (-28)
Function old new delta
pwm_apply_state 476 480 +4
__initcall__kmod_core__307_1092_pwm_debugfs_init4 - 4 +4
__initcall__kmod_core__307_1090_pwm_debugfs_init4 4 - -4
pwm_request_from_chip 628 596 -32
Total: Before=15091, After=15063, chg -0.19%
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
All but one local variable of type pointer to struct crystalcove_pwm are
called "crc_pwm", the one outlier is called "pwm" which is usually
reserved for variables of type pointer to struct pwm_device.
So rename that one "pwm" to "crc_pwm" for consistency.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The pwm driver only provides a single PWM line, so there are no concurrent
calls of the callbacks from different consumers. A single consumer is
expected not to do concurrent calls into the pwm framework. So there is
nothing to serialize and the lock can go away.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
This makes the generated IR much more precise. Before this change, the
driver is unreliable and many users opted to use gpio-ir-tx instead.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
clk_get_rate() may do a mutex lock. Fetch the clock rate once, and prevent
rate changes using clk_rate_exclusive_get().
Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Declare virtiovf_pci_aer_reset_done() as a static function to prevent
the below build warning.
"warning: no previous prototype for 'virtiovf_pci_aer_reset_done'
[-Wmissing-prototypes]"
Fixes: eb61eca0e8c3 ("vfio/virtio: Introduce a vfio driver over virtio devices")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/lkml/20231220143122.63337669@canb.auug.org.au/
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20231220082456.241973-1-yishaih@nvidia.com
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312202115.oDmvN1VE-lkp@intel.com/
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Some PWM devices require sleeping, for example if the pwm device is
connected over I2C. However, many PWM devices could be used from atomic
context, e.g. memory mapped PWM. This is useful for, for example, the
pwm-ir-tx driver which requires precise timing. Sleeping causes havoc
with the generated IR signal.
Since not all PWM devices can support atomic context, we also add a
pwm_might_sleep() function to check if is not supported.
Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
No mutex is used in this driver.
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
In order to introduce a pwm api which can be used from atomic context,
we will need two functions for applying pwm changes:
int pwm_apply_might_sleep(struct pwm *, struct pwm_state *);
int pwm_apply_atomic(struct pwm *, struct pwm_state *);
This commit just deals with renaming pwm_apply_state(), a following
commit will introduce the pwm_apply_atomic() function.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Drivers have access to the chip via a function argument already, so
there is no need to reference it via the PWM device.
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Make the driver take over hardware state without disabling in .probe()
and enable the clock for each enabled channel.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
[ukleinek: split off from a patch that also implemented .get_state()]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm")
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Implement the &pwm_ops->get_state callback so drivers can inherit PWM
state set by the bootloader.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
[ukl: split off from a patch that also fixes clk enable count in .probe()]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Use hweight32() to count the CCxE bits in stm32_pwm_detect_channels().
Since the return value is assigned to chip.npwm, change it to unsigned
int as well.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The channel parameter is only ever set to pwm->hwpwm.
Make it unsigned int as well.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The TIM_CCR1...4 registers are consecutive, so replace the switch
case with a simple calculation. Since ch is known to be in the 0...3
range (it is set to hwpwm < npwm <= 4), drop the unnecessary error
handling. The return value was not checked anyway. What remains does
not warrant keeping the write_ccrx() function around, so instead call
regmap_write() directly at the singular call site.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
As these drivers only do DT based matching, of_match_device() will never
return NULL if we've gotten to probe(). Therefore, the NULL check and
error returns can be dropped.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
In the expression determining the size of the allocation for chip->pwms
it's more natural to use sizeof(*chip->pwms) than sizeof(*pwm). With
that changed, the variable pwm is only used in a for loop and its scope
can be reduced accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Error messages are supposed to end in \n. Add the line terminator to the
two error messages that lack this.
Suggested-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
This macro has the advantage over SIMPLE_DEV_PM_OPS that we don't have to
care about when the functions are actually used, so the corresponding
#ifdef can be dropped.
Also make use of pm_ptr() to discard all PM related stuff if CONFIG_PM
isn't enabled.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
This macro has the advantage over SIMPLE_DEV_PM_OPS that we don't have to
care about when the functions are actually used, so the corresponding
#ifdef can be dropped.
Also make use of pm_ptr() to discard all PM related stuff if CONFIG_PM
isn't enabled.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
This macro has the advantage over SIMPLE_DEV_PM_OPS that we don't have to
care about when the functions are actually used, so the corresponding
__maybe_unused can be dropped.
Also make use of pm_ptr() to discard all PM related stuff if CONFIG_PM
isn't enabled.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
This macro has the advantage over SIMPLE_DEV_PM_OPS that we don't have to
care about when the functions are actually used, so the corresponding
__maybe_unused can be dropped.
Also make use of pm_ptr() to discard all PM related stuff if CONFIG_PM
isn't enabled.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
This macro has the advantage over SIMPLE_DEV_PM_OPS that we don't have to
care about when the functions are actually used, so the corresponding
#ifdef can be dropped.
Also make use of pm_ptr() to discard all PM related stuff if CONFIG_PM
isn't enabled.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
This macro has the advantage over SIMPLE_DEV_PM_OPS that we don't have to
care about when the functions are actually used, so the corresponding
__maybe_unused can be dropped.
Also make use of pm_ptr() to discard all PM related stuff if CONFIG_PM
isn't enabled.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
This macro has the advantage over SIMPLE_DEV_PM_OPS that we don't have to
care about when the functions are actually used, so the corresponding
#ifdef can be dropped.
Also make use of pm_ptr() to discard all PM related stuff if CONFIG_PM
isn't enabled.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
