| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
"A fix to properly clear ghes_edac driver state on driver remove so
that a subsequent load can probe the system properly (Shiju Jose)"
* tag 'edac_urgent_for_v5.9_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/ghes: Fix NULL pointer dereference in ghes_edac_register()
|
|
This patch avoid the warning in vkms_get_vblank_timestamp when vblanks
aren't enabled. When running igt test kms_cursor_crc just after vkms
module, the warning raised like below. Initial value of vblank time is
zero and hrtimer.node.expires is also zero if vblank aren't enabled
before. vkms module isn't real hardware but just virtual hardware
module. so vkms can't generate a resonable timestamp when hrtimer is
off. it's best to grab the current time.
[106444.464503] [IGT] kms_cursor_crc: starting subtest pipe-A-cursor-size-change
[106444.471475] WARNING: CPU: 0 PID: 10109 at
vkms_get_vblank_timestamp+0x42/0x50 [vkms]
[106444.471511] CPU: 0 PID: 10109 Comm: kms_cursor_crc Tainted: G W OE
5.9.0-rc1+ #6
[106444.471514] RIP: 0010:vkms_get_vblank_timestamp+0x42/0x50 [vkms]
[106444.471528] Call Trace:
[106444.471551] drm_get_last_vbltimestamp+0xb9/0xd0 [drm]
[106444.471566] drm_reset_vblank_timestamp+0x63/0xe0 [drm]
[106444.471579] drm_crtc_vblank_on+0x85/0x150 [drm]
[106444.471582] vkms_crtc_atomic_enable+0xe/0x10 [vkms]
[106444.471592] drm_atomic_helper_commit_modeset_enables+0x1db/0x230
[drm_kms_helper]
[106444.471594] vkms_atomic_commit_tail+0x38/0xc0 [vkms]
[106444.471601] commit_tail+0x97/0x130 [drm_kms_helper]
[106444.471608] drm_atomic_helper_commit+0x117/0x140 [drm_kms_helper]
[106444.471622] drm_atomic_commit+0x4a/0x50 [drm]
[106444.471629] drm_atomic_helper_set_config+0x63/0xb0 [drm_kms_helper]
[106444.471642] drm_mode_setcrtc+0x1d9/0x7b0 [drm]
[106444.471654] ? drm_mode_getcrtc+0x1a0/0x1a0 [drm]
[106444.471666] drm_ioctl_kernel+0xb6/0x100 [drm]
[106444.471677] drm_ioctl+0x3ad/0x470 [drm]
[106444.471688] ? drm_mode_getcrtc+0x1a0/0x1a0 [drm]
[106444.471692] ? tomoyo_file_ioctl+0x19/0x20
[106444.471694] __x64_sys_ioctl+0x96/0xd0
[106444.471697] do_syscall_64+0x37/0x80
[106444.471699] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Sidong Yang <realwakka@gmail.com>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200828124553.2178-1-realwakka@gmail.com
|
|
The VKMS blend function was ignoring the alpha channel and just
overwriting vaddr_src with vaddr_dst. This XRGB approach triggers a
warning when running the kms_cursor_crc/cursor-alpha-transparent test
case. In IGT, cairo_format_argb32 uses premultiplied alpha (according to
documentation). Also current DRM assumption is that alpha is
premultiplied. Therefore, this patch considers premultiplied alpha
blending eq to compose vaddr_src with vaddr_dst.
This change removes the following cursor-alpha-transparent warning:
"Suspicious CRC: All values are 0."
V2:
- static for local functions
- const for the read-only variable argb_src
- replaces variable names
- drops unnecessary comment
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200825114532.abzdooluny2ekzvm@smtp.gmail.com
|
|
The OrtusTech COM43H4M85ULC panel is a 18-bit RGB panel. Commit
f098f168e91c ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC
panel") has fixed the bus formats, but forgot to address the bpc value.
Set it to 6.
Fixes: f098f168e91c ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200824003254.21904-1-laurent.pinchart@ideasonboard.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fixes from Gustavo A. R. Silva:
"Fix some minor issues introduced by the recent treewide fallthrough
conversions:
- Fix identation issue
- Fix erroneous fallthrough annotation
- Remove unnecessary fallthrough annotation
- Fix code comment changed by fallthrough conversion"
* tag 'fallthrough-fixes-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
arm64/cpuinfo: Remove unnecessary fallthrough annotation
media: dib0700: Fix identation issue in dib8096_set_param_override()
afs: Remove erroneous fallthough annotation
iio: dpot-dac: fix code comment in dpot_dac_read_raw()
|
|
DSI end-points are supposed to be at node 0 and node 1 as per binding.
So fix this and use node 0 and node 1 for dsi.
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200828074251.3788165-1-vkoul@kernel.org
|
|
The flag MIPI_DSI_CLOCK_NON_CONTINUOUS was wrong used in the DSI driver,
so it was added to this panel, but not necessary.
So, remove this flag since it is not needed.
Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1598626713-5595-1-git-send-email-robert.chiras@oss.nxp.com
|
|
Add Ampire, AM-1280800N3TZQW-T00H 10.1" TFT LCD panel timings.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200829163328.249211-2-jagan@amarulasolutions.com
|
|
Commit ef91bb196b0d ("kernel.h: Silence sparse warning in
lower_32_bits") caused new warnings to show in the fsldma driver, but
that commit was not to blame: it only exposed some very incorrect code
that tried to take the low 32 bits of an address.
That made no sense for multiple reasons, the most notable one being that
that code was intentionally limited to only 32-bit ppc builds, so "only
low 32 bits of an address" was completely nonsensical. There were no
high bits to mask off to begin with.
But even more importantly fropm a correctness standpoint, turning the
address into an integer then caused the subsequent address arithmetic to
be completely wrong too, and the "+1" actually incremented the address
by one, rather than by four.
Which again was incorrect, since the code was reading two 32-bit values
and trying to make a 64-bit end result of it all. Surprisingly, the
iowrite64() did not suffer from the same odd and incorrect model.
This code has never worked, but it's questionable whether anybody cared:
of the two users that actually read the 64-bit value (by way of some C
preprocessor hackery and eventually the 'get_cdar()' inline function),
one of them explicitly ignored the value, and the other one might just
happen to work despite the incorrect value being read.
This patch at least makes it not fail the build any more, and makes the
logic superficially sane. Whether it makes any difference to the code
_working_ or not shall remain a mystery.
Compile-tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A core fix for ACPI matching and two driver bugfixes"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: iproc: Fix shifting 31 bits
i2c: rcar: in slave mode, clear NACK earlier
i2c: acpi: Remove dead code, i.e. i2c_acpi_match_device()
i2c: core: Don't fail PRP0001 enumeration when no ID table exist
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two fixes for Xen: one needed for ongoing work to support virtio with
Xen, and one for a corner case in IRQ handling with Xen"
* tag 'for-linus-5.9-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
arm/xen: Add misuse warning to virt_to_gfn
xen/xenbus: Fix granting of vmalloc'd memory
XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix tempeerature scale in gsc-hwmon driver
- Fix divide by 0 error in nct7904 driver
- Drop non-existing attribute from pmbus/isl68137 driver
- Fix status check in applesmc driver
* tag 'hwmon-for-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (gsc-hwmon) Scale temperature to millidegrees
hwmon: (applesmc) check status earlier.
hwmon: (nct7904) Correct divide by 0
hwmon: (pmbus/isl68137) remove READ_TEMPERATURE_1 telemetry for RAA228228
|
|
icl_combo_phy_verify_state
Clang warns:
drivers/gpu/drm/i915/display/intel_combo_phy.c:268:3: warning: variable
'ret' is uninitialized when used here [-Wuninitialized]
ret &= check_phy_reg(dev_priv, phy, ICL_PORT_TX_DW8_LN0(phy),
^~~
drivers/gpu/drm/i915/display/intel_combo_phy.c:261:10: note: initialize
the variable 'ret' to silence this warning
bool ret;
^
= 0
1 warning generated.
In practice, the bug this warning appears to be concerned with would not
actually matter because ret gets initialized to the return value of
cnl_verify_procmon_ref_values. However, that does appear to be a bug
since it means the first hunk of the patch this fixes won't actually do
anything (since the values of check_phy_reg won't factor into the final
ret value). Initialize ret to true then make all of the assignments a
bitwise AND with itself so that the function always does what it should
do.
Fixes: 239bef676d8e ("drm/i915/display: Implement new combo phy initialization step")
Link: https://github.com/ClangBuiltLinux/linux/issues/1094
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200828202830.7165-1-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
|
|
This patch addresses an irq free warning and null pointer dereference
error problem when nvme devices got timeout error during initialization.
This problem happens when nvme_timeout() function is called while
nvme_reset_work() is still in execution. This patch fixed the problem by
setting flag of the problematic request to NVME_REQ_CANCELLED before
calling nvme_dev_disable() to make sure __nvme_submit_sync_cmd() returns
an error code and let nvme_submit_sync_cmd() fail gracefully.
The following is console output.
[ 62.472097] nvme nvme0: I/O 13 QID 0 timeout, disable controller
[ 62.488796] nvme nvme0: could not set timestamp (881)
[ 62.494888] ------------[ cut here ]------------
[ 62.495142] Trying to free already-free IRQ 11
[ 62.495366] WARNING: CPU: 0 PID: 7 at kernel/irq/manage.c:1751 free_irq+0x1f7/0x370
[ 62.495742] Modules linked in:
[ 62.495902] CPU: 0 PID: 7 Comm: kworker/u4:0 Not tainted 5.8.0+ #8
[ 62.496206] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-p4
[ 62.496772] Workqueue: nvme-reset-wq nvme_reset_work
[ 62.497019] RIP: 0010:free_irq+0x1f7/0x370
[ 62.497223] Code: e8 ce 49 11 00 48 83 c4 08 4c 89 e0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 44 89 f6 48 c70
[ 62.498133] RSP: 0000:ffffa96800043d40 EFLAGS: 00010086
[ 62.498391] RAX: 0000000000000000 RBX: ffff9b87fc458400 RCX: 0000000000000000
[ 62.498741] RDX: 0000000000000001 RSI: 0000000000000096 RDI: ffffffff9693d72c
[ 62.499091] RBP: ffff9b87fd4c8f60 R08: ffffa96800043bfd R09: 0000000000000163
[ 62.499440] R10: ffffa96800043bf8 R11: ffffa96800043bfd R12: ffff9b87fd4c8e00
[ 62.499790] R13: ffff9b87fd4c8ea4 R14: 000000000000000b R15: ffff9b87fd76b000
[ 62.500140] FS: 0000000000000000(0000) GS:ffff9b87fdc00000(0000) knlGS:0000000000000000
[ 62.500534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 62.500816] CR2: 0000000000000000 CR3: 000000003aa0a000 CR4: 00000000000006f0
[ 62.501165] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 62.501515] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 62.501864] Call Trace:
[ 62.501993] pci_free_irq+0x13/0x20
[ 62.502167] nvme_reset_work+0x5d0/0x12a0
[ 62.502369] ? update_load_avg+0x59/0x580
[ 62.502569] ? ttwu_queue_wakelist+0xa8/0xc0
[ 62.502780] ? try_to_wake_up+0x1a2/0x450
[ 62.502979] process_one_work+0x1d2/0x390
[ 62.503179] worker_thread+0x45/0x3b0
[ 62.503361] ? process_one_work+0x390/0x390
[ 62.503568] kthread+0xf9/0x130
[ 62.503726] ? kthread_park+0x80/0x80
[ 62.503911] ret_from_fork+0x22/0x30
[ 62.504090] ---[ end trace de9ed4a70f8d71e2 ]---
[ 123.912275] nvme nvme0: I/O 12 QID 0 timeout, disable controller
[ 123.914670] nvme nvme0: 1/0/0 default/read/poll queues
[ 123.916310] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 123.917469] #PF: supervisor write access in kernel mode
[ 123.917725] #PF: error_code(0x0002) - not-present page
[ 123.917976] PGD 0 P4D 0
[ 123.918109] Oops: 0002 [#1] SMP PTI
[ 123.918283] CPU: 0 PID: 7 Comm: kworker/u4:0 Tainted: G W 5.8.0+ #8
[ 123.918650] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-p4
[ 123.919219] Workqueue: nvme-reset-wq nvme_reset_work
[ 123.919469] RIP: 0010:__blk_mq_alloc_map_and_request+0x21/0x80
[ 123.919757] Code: 66 0f 1f 84 00 00 00 00 00 41 55 41 54 55 48 63 ee 53 48 8b 47 68 89 ee 48 89 fb 8b4
[ 123.920657] RSP: 0000:ffffa96800043d40 EFLAGS: 00010286
[ 123.920912] RAX: ffff9b87fc4fee40 RBX: ffff9b87fc8cb008 RCX: 0000000000000000
[ 123.921258] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9b87fc618000
[ 123.921602] RBP: 0000000000000000 R08: ffff9b87fdc2c4a0 R09: ffff9b87fc616000
[ 123.921949] R10: 0000000000000000 R11: ffff9b87fffd1500 R12: 0000000000000000
[ 123.922295] R13: 0000000000000000 R14: ffff9b87fc8cb200 R15: ffff9b87fc8cb000
[ 123.922641] FS: 0000000000000000(0000) GS:ffff9b87fdc00000(0000) knlGS:0000000000000000
[ 123.923032] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 123.923312] CR2: 0000000000000000 CR3: 000000003aa0a000 CR4: 00000000000006f0
[ 123.923660] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 123.924007] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 123.924353] Call Trace:
[ 123.924479] blk_mq_alloc_tag_set+0x137/0x2a0
[ 123.924694] nvme_reset_work+0xed6/0x12a0
[ 123.924898] process_one_work+0x1d2/0x390
[ 123.925099] worker_thread+0x45/0x3b0
[ 123.925280] ? process_one_work+0x390/0x390
[ 123.925486] kthread+0xf9/0x130
[ 123.925642] ? kthread_park+0x80/0x80
[ 123.925825] ret_from_fork+0x22/0x30
[ 123.926004] Modules linked in:
[ 123.926158] CR2: 0000000000000000
[ 123.926322] ---[ end trace de9ed4a70f8d71e3 ]---
[ 123.926549] RIP: 0010:__blk_mq_alloc_map_and_request+0x21/0x80
[ 123.926832] Code: 66 0f 1f 84 00 00 00 00 00 41 55 41 54 55 48 63 ee 53 48 8b 47 68 89 ee 48 89 fb 8b4
[ 123.927734] RSP: 0000:ffffa96800043d40 EFLAGS: 00010286
[ 123.927989] RAX: ffff9b87fc4fee40 RBX: ffff9b87fc8cb008 RCX: 0000000000000000
[ 123.928336] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9b87fc618000
[ 123.928679] RBP: 0000000000000000 R08: ffff9b87fdc2c4a0 R09: ffff9b87fc616000
[ 123.929025] R10: 0000000000000000 R11: ffff9b87fffd1500 R12: 0000000000000000
[ 123.929370] R13: 0000000000000000 R14: ffff9b87fc8cb200 R15: ffff9b87fc8cb000
[ 123.929715] FS: 0000000000000000(0000) GS:ffff9b87fdc00000(0000) knlGS:0000000000000000
[ 123.930106] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 123.930384] CR2: 0000000000000000 CR3: 000000003aa0a000 CR4: 00000000000006f0
[ 123.930731] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 123.931077] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Co-developed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
The kernel requires a power of two for boundaries because that's the
only way it can efficiently split commands that cross them. A
controller, however, may report a non-power of two boundary.
The driver had been rounding the controller's value to one the kernel
can use, but splitting on the wrong boundary provides no benefit on the
device side, and incurs additional submission overhead from non-optimal
splits.
Don't provide any boundary hint if the controller's value can't be used
and log a warning when first scanning a disk's unreported IO boundary.
Since the chunk sector logic has grown, move it to a separate function.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
If the driver has to unbind from the controller for an early failure
before the subsystem has been set up, there won't be a subsystem holding
the controller's instance, so the controller needs to free its own
instance in this case.
Fixes: 733e4b69d508d ("nvme: Assign subsys instance from first ctrl")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
The way 'spin_lock()' and 'spin_lock_irqsave()' are used is not consistent
in this function.
Use 'spin_lock_irqsave()' also here, as there is no guarantee that
interruptions are disabled at that point, according to surrounding code.
Fixes: a97ec51b37ef ("nvmet_fc: Rework target side abort handling")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
PCIe controllers do not have fabric opts, verify they exist before
showing ctrl_loss_tmo or reconnect_delay attributes.
Fixes: 764075fdcb2f ("nvme: expose reconnect_delay and ctrl_loss_tmo via sysfs")
Reported-by: Tobias Markus <tobias@markus-regensburg.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
If the controller becomes unresponsive in the middle of a reset, we
will hang because we are waiting for the freeze to complete, but that
cannot happen since we have commands that are inflight holding the
q_usage_counter, and we can't blindly fail requests that times out.
So give a timeout and if we cannot wait for queue freeze before
unfreezing, fail and have the error handling take care how to
proceed (either schedule a reconnect of remove the controller).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
When a request times out in a LIVE state, we simply trigger error
recovery and let the error recovery handle the request cancellation,
however when a request times out in a non LIVE state, we make sure to
complete it immediately as it might block controller setup or teardown
and prevent forward progress.
However tearing down the entire set of I/O and admin queues causes
freeze/unfreeze imbalance (q->mq_freeze_depth) because and is really
an overkill to what we actually need, which is to just fence controller
teardown that may be running, stop the queue, and cancel the request if
it is not already completed.
Now that we have the controller teardown_lock, we can safely serialize
request cancellation. This addresses a hang caused by calling extra
queue freeze on controller namespaces, causing unfreeze to not complete
correctly.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
In the timeout handler we may need to complete a request because the
request that timed out may be an I/O that is a part of a serial sequence
of controller teardown or initialization. In order to complete the
request, we need to fence any other context that may compete with us
and complete the request that is timing out.
In this case, we could have a potential double completion in case
a hard-irq or a different competing context triggered error recovery
and is running inflight request cancellation concurrently with the
timeout handler.
Protect using a ctrl teardown_lock to serialize contexts that may
complete a cancelled request due to error recovery or a reset.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
If the controller becomes unresponsive in the middle of a reset, we will
hang because we are waiting for the freeze to complete, but that cannot
happen since we have commands that are inflight holding the
q_usage_counter, and we can't blindly fail requests that times out.
So give a timeout and if we cannot wait for queue freeze before
unfreezing, fail and have the error handling take care how to proceed
(either schedule a reconnect of remove the controller).
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
When a request times out in a LIVE state, we simply trigger error
recovery and let the error recovery handle the request cancellation,
however when a request times out in a non LIVE state, we make sure to
complete it immediately as it might block controller setup or teardown
and prevent forward progress.
However tearing down the entire set of I/O and admin queues causes
freeze/unfreeze imbalance (q->mq_freeze_depth) because and is really
an overkill to what we actually need, which is to just fence controller
teardown that may be running, stop the queue, and cancel the request if
it is not already completed.
Now that we have the controller teardown_lock, we can safely serialize
request cancellation. This addresses a hang caused by calling extra
queue freeze on controller namespaces, causing unfreeze to not complete
correctly.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
In the timeout handler we may need to complete a request because the
request that timed out may be an I/O that is a part of a serial sequence
of controller teardown or initialization. In order to complete the
request, we need to fence any other context that may compete with us
and complete the request that is timing out.
In this case, we could have a potential double completion in case
a hard-irq or a different competing context triggered error recovery
and is running inflight request cancellation concurrently with the
timeout handler.
Protect using a ctrl teardown_lock to serialize contexts that may
complete a cancelled request due to error recovery or a reset.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
Users can detect if the wait has completed or not and take appropriate
actions based on this information (e.g. weather to continue
initialization or rather fail and schedule another initialization
attempt).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
NVME_CTRL_NEW should never see any I/O, because in order to start
initialization it has to transition to NVME_CTRL_CONNECTING and from
there it will never return to this state.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
When handling commands without in-capsule data, we assign the ttag
assuming we already have the queue commands array allocated (based
on the queue size information in the connect data payload). However
if the connect itself did not send the connect data in-capsule we
have yet to allocate the queue commands,and we will assign a bogus
ttag and suffer a NULL dereference when we receive the corresponding
h2cdata pdu.
Fix this by checking if we already allocated commands before
dereferencing it when handling h2cdata, if we didn't, its for sure a
connect and we should use the preallocated connect command.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
Pull block fixes from Jens Axboe:
- nbd timeout fix (Hou)
- device size fix for loop LOOP_CONFIGURE (Martijn)
- MD pull from Song with raid5 stripe size fix (Yufen)
* tag 'block-5.9-2020-08-28' of git://git.kernel.dk/linux-block:
md/raid5: make sure stripe_size as power of two
loop: Set correct device size when using LOOP_CONFIGURE
nbd: restore default timeout when setting it to zero
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework fix from Rafael Wysocki:
"Prevent the promotion of the secondary firmware node of a device to
the primary one from leaking a pointer (Heikki Krogerus)"
* tag 'devprop-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: Fix the secondary firmware node handling in set_primary_fwnode()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix two recent issues in the ACPI memory mappings management
code and tighten up error handling in the ACPI driver for AMD SoCs
(APD).
Specifics:
- Avoid redundant rounding to the page size in acpi_os_map_iomem() to
address a recently introduced issue with the EFI memory map
permission check on ARM64 (Ard Biesheuvel).
- Fix acpi_release_memory() to wait until the memory mappings
released by it have been really unmapped (Rafael Wysocki).
- Make the ACPI driver for AMD SoCs (APD) check the return value of
acpi_dev_get_property() to avoid failures in the cases when the
device property under inspection is missing (Furquan Shaikh)"
* tag 'acpi-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: OSL: Prevent acpi_release_memory() from returning too early
ACPI: ioremap: avoid redundant rounding to OS page size
ACPI: SoC: APD: Check return value of acpi_dev_get_property()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the recently added Tegra194 cpufreq driver and the handling
of devices using runtime PM during system-wide suspend, improve the
intel_pstate driver documentation and clean up the cpufreq core.
Specifics:
- Make the recently added Tegra194 cpufreq driver use
read_cpuid_mpir() instead of cpu_logical_map() to avoid exporting
logical_cpu_map (Sumit Gupta).
- Drop the automatic system wakeup event reporting for devices with
pending runtime-resume requests during system-wide suspend to avoid
spurious aborts of the suspend flow (Rafael Wysocki).
- Fix build warning in the intel_pstate driver documentation and
improve the wording in there (Randy Dunlap).
- Clean up two pieces of code in the cpufreq core (Viresh Kumar)"
* tag 'pm-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Use WARN_ON_ONCE() for invalid relation
cpufreq: No need to verify cpufreq_driver in show_scaling_cur_freq()
PM: sleep: core: Fix the handling of pending runtime resume requests
Documentation: fix pm/intel_pstate build warning and wording
cpufreq: replace cpu_logical_map() with read_cpuid_mpir()
|
|
* acpi-mm:
ACPI: OSL: Prevent acpi_release_memory() from returning too early
ACPI: ioremap: avoid redundant rounding to OS page size
|
|
* pm-cpufreq:
cpufreq: Use WARN_ON_ONCE() for invalid relation
cpufreq: No need to verify cpufreq_driver in show_scaling_cur_freq()
Documentation: fix pm/intel_pstate build warning and wording
cpufreq: replace cpu_logical_map() with read_cpuid_mpir()
|
|
Fixes below compiler warnings:
CC [M] drivers/gpu/drm/amd/amdgpu/amdgpu_device.o
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:381:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration]
381 | void static inline amdgpu_mm_wreg_mmio(struct amdgpu_device *adev, uint32_t reg, uint32_t v, uint32_t acc_flags)
| ^~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:381:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c: In function ‘amdgpu_device_fini’:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:3381:6: warning: variable ‘r’ set but not used [-Wunused-but-set-variable]
3381 | int r;
| ^
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update with latest tuning in the table.
v3: Fix values of to last columns.
BSpec: 21257
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826201549.83658-3-jose.souza@intel.com
|
|
Reusing icl_get_combo_buf_trans() for eDP was causing the wrong table
being used when the eDP port don't support low power voltage swing table.
v2: Only use icl_combo_phy_ddi_translations_edp_hbr3 if low_vswing is
set as EHL combo phy supports HBR3 (Matt R)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Cc: Khaled Almahallawy <khaled.almahallawy@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826201549.83658-2-jose.souza@intel.com
|
|
Reusing icl_get_combo_buf_trans() for eDP was causing the wrong table
being used when the eDP port don't support low power voltage swing table.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Cc: Khaled Almahallawy <khaled.almahallawy@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826201549.83658-1-jose.souza@intel.com
|
|
TGL made stepping a litte mess, workarounds refer to the stepping of
the IP(GT or Display) not of the GPU stepping so it would already
require the same solution as used in commit 96c5a15f9f39
("drm/i915/kbl: Fix revision ID checks").
But to make things even more messy it have a different IP stepping
mapping between SKUs and the same stepping revision of GT do not match
the same HW between TGL U/Y and regular TGL.
So it was required to have 2 different macros to check GT WAs while
for Display we are able to use just one macro that uses the right
revids table.
All TGL workarounds checked and updated accordingly.
v2:
- removed TODO to check if WA 14010919138 applies to regular TGL.
- fixed display stepping in regular TGL (Anusha)
BSpec: 52890
BSpec: 55378
BSpec: 44455
Reviewed-by: Anusha Srivatsa <anusha.srivtsa@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Penne Lee <penne.y.lee@intel.com>
Cc: Guangyao Bai <guangyao.bai@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200827233943.400946-1-jose.souza@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD fixes from Lee Jones:
- fix double free
- handle devicetree disabled devices gracefully
* tag 'mfd-fixes-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: mfd-core: Ensure disabled devices are ignored without error
mfd: core: Fix double-free in mfd_remove_devices_fn()
|
|
Pull drm fixes from Dave Airlie:
"As expected a bit of an rc3 uptick, amdgpu and msm are the main ones,
one msm patch was from the merge window, but had dependencies and we
dropped it until the other tree had landed. Otherwise it's a couple of
fixes for core, and etnaviv, and single i915, exynos, omap fixes.
I'm still tracking the Sandybridge gpu relocations issue, if we don't
see much movement I might just queue up the reverts. I'll talk to
Daniel next week once he's back from holidays.
core:
- Take modeset bkl for legacy drivers
dp_mst:
- Allow null crtc in dp_mst
i915:
- Fix command parser desc matching with masks
amdgpu:
- Misc display fixes
- Backlight fixes
- MPO fix for DCN1
- Fixes for Sienna Cichlid
- Fixes for Navy Flounder
- Vega SW CTF fixes
- SMU fix for Raven
- Fix a possible overflow in INFO ioctl
- Gfx10 clockgating fix
msm:
- opp/bw scaling patch followup
- frequency restoring fux
- vblank in atomic commit fix
- dpu modesetting fixes
- fencing fix
etnaviv:
- scheduler interaction fix
- gpu init regression fix
exynos:
- Just drop __iommu annotation to fix sparse warning
omap:
- locking state fix"
* tag 'drm-fixes-2020-08-28' of git://anongit.freedesktop.org/drm/drm: (41 commits)
drm/amd/display: Fix memleak in amdgpu_dm_mode_config_init
drm/amdgpu: disable runtime pm for navy_flounder
drm/amd/display: Retry AUX write when fail occurs
drm/amdgpu: Fix buffer overflow in INFO ioctl
drm/amd/powerplay: Fix hardmins not being sent to SMU for RV
drm/amdgpu: use MODE1 reset for navy_flounder by default
drm/amd/pm: correct the thermal alert temperature limit settings
drm/amdgpu: add asd fw check before loading asd
drm/amd/display: Keep current gain when ABM disable immediately
drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulation
drm/amd/display: Revert HDCP disable sequence change
drm/amd/display: Send DISPLAY_OFF after power down on boot
drm/amdgpu/gfx10: refine mgcg setting
drm/amd/pm: correct Vega20 swctf limit setting
drm/amd/pm: correct Vega12 swctf limit setting
drm/amd/pm: correct Vega10 swctf limit setting
drm/amd/pm: set VCN pg per instances
drm/amd/pm: enable run_btc callback for sienna_cichlid
drivers: gpu: amd: Initialize amdgpu_dm_backlight_caps object to 0 in amdgpu_dm_update_backlight_caps
drm/amd/display: Reject overlay plane configurations in multi-display scenarios
...
|
|
Remove 1000baseT_Half to advertise correct hardware capability in
phylink_validate() callback function.
Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5")
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no point in using GFP_ATOMIC here.
It is a probe function, and GFP_KERNEL is already used the line before
and the line after.
Use GFP_KERNEL instead.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
During bit-banging the IR on a gpio pin, we cannot be scheduled or have
anything interrupt us, else the generated signal will be incorrect.
Therefore, we need to disable interrupts on the local cpu. This also
disables preemption.
local_irq_disable() does exactly what we need and does not require a
spinlock.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Device drivers do not expect to have change_protocol or wakeup
re-programming to be accesed after rc_unregister_device(). This can
cause the device driver to access deallocated resources.
Cc: <stable@vger.kernel.org> # 4.16+
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Only report uevent file contents if device still registered, else we
might read freed memory.
Reported-by: syzbot+ceef16277388d6f24898@syzkaller.appspotmail.com
Cc: Hillf Danton <hdanton@sina.com>
Cc: <stable@vger.kernel.org> # 4.16+
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The driver expects struct gpio_chip has of_node field and that field is
only there if CONFIG_OF_GPIO is defined. Fix this by changing the OF
dependency to OF_GPIO.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
After the recent conversion of the media build infrastructure to select
V4L2 components instead of depending on their presence, which took place
in:
32a363d0b0b14 ("media: Kconfig files: use select for V4L2 subdevs and MC")
imx214 stands out as being the (only?) media I2C driver that still depends
on a V4L2 core symbol instead of selecting it.
This confuses the build system which claims it has detected a circular
dependency when other drivers select the same symbol as the imx214
driver does.
drivers/media/i2c/Kconfig:728:error: recursive dependency detected!
drivers/media/i2c/Kconfig:728: symbol VIDEO_IMX214 depends on V4L2_FWNODE
drivers/media/v4l2-core/Kconfig:71: symbol V4L2_FWNODE is selected by VIDEO_BCM2835_UNICAM
drivers/media/platform/bcm2835/Kconfig:3: symbol VIDEO_BCM2835_UNICAM depends on VIDEO_V4L2_SUBDEV_API
drivers/media/v4l2-core/Kconfig:19: symbol VIDEO_V4L2_SUBDEV_API depends on MEDIA_CONTROLLER
drivers/media/Kconfig:168: symbol MEDIA_CONTROLLER is selected by VIDEO_IMX214
Fix this by making the imx214 driver select V4L2_FWNODE instead of
depending on it and align it with all the other drivers.
Fixes: 32a363d0b0b14 ("media: Kconfig files: use select for V4L2 subdevs and MC")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Commit e49aa9a9bd22 ("mfd: core: Make a best effort attempt to match
devices with the correct of_nodes") changed the semantics for disabled
devices in mfd_add_device(). Instead of silently ignoring a disabled
child device, an error was returned. On receipt of the error
mfd_add_devices() the precedes to remove *all* child devices and
returns an all-failed error to the caller, which will inevitably fail
the parent device as well.
This patch reverts back to the old semantics and ignores child devices
which are disabled in Device Tree.
Fixes: e49aa9a9bd22 ("mfd: core: Make a best effort attempt to match devices with the correct of_nodes")
Reported-by: Icenowy Zheng <icenowy@aosc.io>
Tested-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
commit b5a84ecf025a ("mmc: tegra: Add Tegra210 support")
Tegra210 and later has a separate sdmmc_legacy_tm (TMCLK) used by Tegra
SDMMC hawdware for data timeout to achive better timeout than using
SDCLK and using TMCLK is recommended.
USE_TMCLK_FOR_DATA_TIMEOUT bit in Tegra SDMMC register
SDHCI_TEGRA_VENDOR_SYS_SW_CTRL can be used to choose either TMCLK or
SDCLK for data timeout.
Default USE_TMCLK_FOR_DATA_TIMEOUT bit is set to 1 and TMCLK is used
for data timeout by Tegra SDMMC hardware and having TMCLK not enabled
is not recommended.
So, this patch adds quirk NVQUIRK_HAS_TMCLK for SoC having separate
timeout clock and keeps TMCLK enabled all the time.
Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support")
Cc: stable <stable@vger.kernel.org> # 5.4
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1598548861-32373-8-git-send-email-skomatineni@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
commit 4346b7c7941d ("mmc: tegra: Add Tegra186 support")
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK is set for Tegra186 from the
beginning of its support in driver.
Tegra186 SDMMC hardware by default uses timeout clock (TMCLK) instead
of SDCLK and this quirk should not be set.
So, this patch remove this quirk for Tegra186.
Fixes: 4346b7c7941d ("mmc: tegra: Add Tegra186 support")
Cc: stable <stable@vger.kernel.org> # 5.4
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1598548861-32373-3-git-send-email-skomatineni@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
