summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-09-03rtlwifi: Fix missing country code for Great BritainLarry Finger
Some RTL8821AE devices sold in Great Britain have the country code of 0x25 encoded in their EEPROM. This value is not tested in the routine that establishes the regulatory info for the chip. The fix is to set this code to have the same capabilities as the EU countries. In addition, the channels allowed for COUNTRY_CODE_ETSI were more properly suited for China and Israel, not the EU. This problem has also been fixed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03zd1211rw: fix spelling mistake "firmeware" -> "firmware"Colin Ian King
Trivial fix to spelling mistake in dev_err message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtl8xxxu: Make rtl8xxxu_ampdu_action less chattyHans de Goede
On my home network rtl8xxxu is spamming the log with IEEE80211_AMPDU_RX_START / IEEE80211_AMPDU_RX_STOP every few seconds turn these messages into debug messages. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> [kvalo@codeaurora.org: fix commit title] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtl8xxxu: gen1: Fix non static symbol warningWei Yongjun
Fixes the following sparse warning: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:898:1: warning: symbol 'rtl8xxxu_gen1_h2c_cmd' was not declared. Should it be static? Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtl8xxxu: Split filling of TX descriptors into separate functionsJes Sorensen
Split the filling of TX descriptors into a generic portion used on all devices, and format specific helper functions provided in the fops structure. This also cleaned up some mess, even if non harmful, in the handling of txdesc40 descriptors, where the code randomly would switch between the pointer to tx_desc and tx_desc40. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtl8xxxu: Determine need for shore preamble before updating TX descriptorsJes Sorensen
Another patch to move this detection out of the code handling the TX descriptor update. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtl8xxxu: Determine the need for SGI before handling specific TX desc formatsJes Sorensen
In order to be able to split out the TX descriptor handling code, determine in advance the need to mark SGI. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtl8xxxu: Simplify calculating of hw value used for setting TX rateJes Sorensen
Calculating the value in one place rather than using one calculation in one place and a different one for management frames in another location makes little sense. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtl8xxxu: Introduce fops bitflag indicating type of thermal meterJes Sorensen
Do not rely on TX descriptor size to determine the thermal meter type. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtl8xxxu: Convert flags in rtl8xxxu_fileops to bitflagsJes Sorensen
This leaves space for a few more flags within the same space. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtl8xxxu: Use flag to indicate whether device has TX report timer supportJes Sorensen
Use a fileops flag to indicate whether the device has TX report timer support. This will make it easier to include future devices such as 8188eu to use the TX report timer. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtl8xxxu: Add interrupt bit definitions for gen2 partsJes Sorensen
These are primarily needed for SDIO/PCI parts, but the vendor driver still sets them for some USB devices. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtl8xxxu: Add bit definitions for REG_FPGA0_TX_INFOJes Sorensen
This adds TX antenna selection bit defines for OFDM mode. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtl8xxxu: Simplify code setting TX buffer boundaryJes Sorensen
With all devices now offering fops->total_page_num, get rid of the if mess for setting the TX buffer boundary. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtl8xxxu: Remove now obsolete rtl8xxxu_old_init_queue_reserved_page()Jes Sorensen
Switching over the old devices to use the new function allows us to get rid of this legacy. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtl8xxxu: Switch 8192cu/8188cu devices to use ↵Jes Sorensen
rtl8xxxu_init_queue_reserved_page() This was the last user of the old rtl8xxxu_old_init_queue_reserved_page() which can now be removed. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtl8xxxu: Switch 8723a to use new rtl8xxxu_init_queue_reserved_page() routineJes Sorensen
This changes the pub-queue value written to REQ_RQPN, however the old code used a hard coded minimum value assuming there would always be an active lo-queue, even when no USB EP was found for it. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtl8xxxu: Add TX page defines for 8723bJes Sorensen
This switches the 8723b driver to use the new rtl8xxxu_init_queue_reserved_page() function. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtl8xxxu: Add TP-Link TL-WN823N v2 to list of supported devicesJes Sorensen
This is an rtl8192eu based dongle (the v1 is an rtl8192cu). Reported and tested by Myckel Habets. Reported-by: Myckel Habets <myckel@sdf.lonestar.org> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtl8xxxu: Fix error handling if rtl8xxxu_init_device() failsJes Sorensen
For some reason we lost the code bailing if rtl8xxxu_init_device() returned an error. This catches the error and also cleans up the error handling. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtl8xxxu: Mark 0x2001:0x3308 as testedJes Sorensen
D-Link DWA-121 is reported as working. Reported-by: Stefano Bravi <stefanobravi69@libero.it> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtl8xxxu: Mark 0x20f4:0x648b as testedJes Sorensen
Successfully tested by Jocelyn Mayer Reported-by: J. Mayer <l_indien@magic.fr> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03wlcore: Remove wl pointer from wl_sta structureMaxim Altshul
This field was added to wl_sta struct to get hw in situations where it was not given to driver by mac80211. In our case, get_expected_throughput op did not send hw to driver. This patch reverts the change, as it is no longer needed due to commit 4fdbc67a25ce ("mac80211: call get_expected_throughput only after adding station") as hw is now sent as a parameter. Signed-off-by: Maxim Altshul <maxim.altshul@ti.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtlwifi: rtl8723ae: Fix leak in _rtl8723e_read_adapter_info()Christian Engelmayer
In case of (rtlhal->oem_id != RT_CID_DEFAULT), the function directly returns and leaks the already allocated hwinfo memory. Go through the correct exit path. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtlwifi: rtl8192de: Fix leak in _rtl92de_read_adapter_info()Christian Engelmayer
In case rtl_get_hwinfo() fails, the function directly returns and leaks the already allocated hwinfo memory. Go through the correct exit path. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03iio: accel: bmc150: reset chip at init timeOlof Johansson
In at least one known setup, the chip comes up in a state where reading the chip ID returns garbage unless it's been reset, due to noise on the wires during system boot. All supported chips have the same reset method, and based on the datasheets they all need 1.3 or 1.8ms to recover after reset. So, do the conservative thing here and always reset the chip. Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-03iio: fix pressure data output unit in hid-sensor-attributesKweh, Hock Leong
According to IIO ABI definition, IIO_PRESSURE data output unit is kilopascal: http://lxr.free-electrons.com/source/Documentation/ABI/testing/sysfs-bus-iio This patch fix output unit of HID pressure sensor IIO driver from pascal to kilopascal to follow IIO ABI definition. Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-03Merge remote-tracking branch 'regmap/fix/rbtree' into regmap-linusMark Brown
2016-09-03Merge remote-tracking branch 'regmap/fix/cache' into regmap-linusMark Brown
2016-09-03spi: Prevent unexpected SPI time out due to arithmetic overflowSien Wu
When reading SPI flash as MTD device, the transfer length is directly passed to the spi driver. If the requested data size exceeds 512KB, it will cause the time out calculation to overflow since transfer length is 32-bit unsigned integer. This issue is resolved by using 64-bit unsigned integer to perform the arithmetic. Signed-off-by: Sien Wu <sien.wu@ni.com> Acked-by: Brad Keryan <brad.keryan@ni.com> Acked-by: Gratian Crisan <gratian.crisan@ni.com> Acked-by: Brad Mouring <brad.mouring@ni.com> Natinst-ReviewBoard-ID 150232 Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-03brcmfmac: add missing header dependenciesBaoyou Xie
We get 1 warning when building kernel with W=1: drivers/net/wireless/broadcom/brcm80211/brcmfmac/tracepoint.c:23:6: warning: no previous prototype for '__brcmf_err' [-Wmissing-prototypes] In fact, this function is declared in brcmfmac/debug.h, so this patch adds missing header dependencies. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: fix missing break on IEEE80211_STYPE_ACTION caseColin Ian King
The IEEE80211_STYPE_ACTION case is missing a break in the switch statement, causing it to fall through to the default case that reports a debug message about an unknown frame subtype. Fix this by adding in the missing break statement. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rt2x00usb: Fix error return codeChristophe Jaillet
We know that 'retval = 0' because it has been tested a few lines above. So, if 'devm_kmalloc' fails, 0 will be returned instead of an error code. Return -ENOMEM instead. Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: add custom regulatory domain supportAmitkumar Karwar
This patch creates custom regulatory rules based on the information received from firmware and enable them during wiphy registration. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: add CHAN_REGION_CFG commandAmitkumar Karwar
This patch adds command preparation and response handling for CHAN_REGION_CFG command. These changes are prerequisites for adding custom regulatory domain support. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: correct aid value during tdls setupXinming Hu
AID gets updated during TDLS setup, but modified value isn't reflected in "priv->assoc_rsp_buf". This causes TDLS setup failure. The problem is fixed here. Fixes: 4aff53ef18e4a4 ("mwifiex: parsing aid while receiving..") Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: simplify length computation for some memsetChristophe Jaillet
This patch should be a no-op. It just simplifies code by using the name of a variable instead of its type when calling 'sizeof'. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: fix the length parameter of a memsetChristophe Jaillet
In 'mwifiex_get_ver_ext', we have: struct mwifiex_ver_ext ver_ext; memset(&ver_ext, 0, sizeof(struct host_cmd_ds_version_ext)); This is likely that memset'ing sizeof(struct mwifiex_ver_ext) was expected. Remove the ambiguity by using the variable name directly instead of its type. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03rtlwifi: remove superfluous conditionHeinrich Schuchardt
If sta == NULL, the changed line will not be reached. So no need to check that sta != NULL here. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03ath5k: fix EEPROM dumping via debugfsSergey Ryazanov
EEPROM size calculated in 16-bit words, so we should take into account this fact during buffer allocation. CC: Jiri Slaby <jirislaby@gmail.com> CC: Nick Kossifidis <mickflemm@gmail.com> CC: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03wl3501_cs: Add spinlock to wl3501_resetPavel Andrianov
Likely wl3501_reset should acquire spinlock as wl3501_{open, close}. One of calls of wl3501_reset has been already protected. The others were unprotected and might lead to a race condition. The patch adds spinlock into the wl3501_reset and removes it from wl3501_tx_timeout. Found by Linux Driver Verification project (linuxtesting.org) Signed-off-by: Pavel Andrianov <andrianov@ispras.ru> Acked-by: Vaishali Thakkar <vaishali.thakkar@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: key_material_v2 remove superfluous conditionHeinrich Schuchardt
We are using mac as source address in a memcpy. In the lines below we can assume mac is not NULL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: remove superfluous conditionHeinrich Schuchardt
for_each_property_of_node is only executed if the property prop is not NULL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03bcma: support BCM53573 series of wireless SoCsRafał Miłecki
BCM53573 seems to be the first series of Northstar family with wireless on the chip. The base models are BCM53573-s (A0, A1) and there is also BCM47189B0 which seems to be some small modification. The only problem with these chipsets seems to be watchdog. It's totally unavailable on 53573A0 / 53573A1 and preferable PMU watchdog is broken on 53573B0 / 53573B1. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: fix radar detection issueGanapathi Bhat
It's been observed that firmware sends RADAR detected event without specifying bss_num/bss_type. Also, the event body is empty. Currently the event is being ignored by driver. This patch checks on which interface 11H is active, accordingly fills bss_num/bss_type and handles the event. Condition "if (le32_to_cpu(rdr_event->passed))" which always fails is also removed. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: add HT aggregation support for adhoc modeXinming Hu
This patch adds HT support for adhoc station. Firmware will upload ibss sta connect event with beacon data, whenever new station joins the adhoc network. Driver will check the HT IE and decide whether to support HT aggreagation or not. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: remove misleading disconnect messageAmitkumar Karwar
Disconnect message in mwifiex_reset_connect_state() would displays necessary information. We unnecessarily have exactly same message in cfg80211_disconnect(). As priv->cfg_bssid is cleared at this point of time, it prints incorrect(all zero) MAC. This message is removed here. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: process rxba_sync eventXinming Hu
Firmware may filter and drop packets under certain condition, for example, ARP SA=DA packet. this event will be used to synchronize the Rx Block Acknowledgment (BA) window bitmap and to fill any holes in driver side. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: support random MAC address for scanningGanapathi Bhat
This patch advertises RANDOM_MAC_ADDR feature to cfg80211. It allow the application to issue scan with a MAC address and mask. Random MACs are generated and used in probe requests sent for scanning until it is changed by the application or device is restarted. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-03mwifiex: fix failed to reconnect after interface disabled/enabledAmitkumar Karwar
Recent patch "mwifiex: fix NULL pointer" skips extended scan event handling when suspend is in progress. It created a problem for scan after interface disabled/enabled case. This patch solves the problem by checking netif_running() status. Fixes:16d25da94f3d654 ("mwifiex: fix NULL pointer dereference during suspend") Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-13 18:39:03 +0000