summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-08-28net/mlx5e: Don't wait for RQ completions on closeSaeed Mahameed
This will significantly reduce receive queue flush time on interface down. Instead of asking the firmware to flush the RQ (Receive Queue) via asynchronous completions when moved to error, we handle RQ flush manually (mlx5e_free_rx_descs) same as we did when RQ flush got timed out. This will reduce RQs flush time and speedup interface down procedure (ifconfig down) from 6 sec to 0.3 sec on a 48 cores system. Moved mlx5e_free_rx_descs en_main.c where it is needed, to keep en_rx.c free form non critical data path code for better code locality. Fixes: 6cd392a082de ('net/mlx5e: Handle RQ flush in error cases') Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-28net/mlx5e: Limit UMR length to the device's limitationSaeed Mahameed
ConnectX-4 UMR (User Memory Region) MTT translation table offset in WQE is limited to U16_MAX, before this patch we ignored that limitation and requested the maximum possible UMR translation length that the netdev might need (MAX channels * MAX pages per channel). In case of a system with #cores > 32 and when linear WQE allocation fails, falling back to using UMR WQEs will cause the RQ (Receive Queue) to get stuck. Here we limit UMR length to min(U16_MAX, max required pages) (while considering the required alignments) on driver load, by default U16_MAX is sufficient since the default RX rings value guarantees that we are in range, dynamically (on set_ringparam/set_channels) we will check if the new required UMR length (num mtts) is still in range, if not, fail the request. Fixes: bc77b240b3c5 ('net/mlx5e: Add fragmented memory support for RX multi packet WQE') Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-28Merge tag 'drm-fixes-for-4.8-rc4' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "A bunch of fixes covering i915, amdgpu, one tegra and some core DRM ones. Nothing too strange at this point" * tag 'drm-fixes-for-4.8-rc4' of git://people.freedesktop.org/~airlied/linux: (21 commits) drm/atomic: Don't potentially reset color_mgmt_changed on successive property updates. drm: Protect fb_defio in drivers with CONFIG_KMS_FBDEV_EMULATION drm/amdgpu: skip TV/CV in display parsing drm/amdgpu: avoid a possible array overflow drm/amdgpu: fix lru size grouping v2 drm/tegra: dsi: Enhance runtime power management drm/i915: Fix botched merge that downgrades CSR versions. drm/i915/skl: Ensure pipes with changed wms get added to the state drm/i915/gen9: Only copy WM results for changed pipes to skl_hw drm/i915/skl: Add support for the SAGV, fix underrun hangs drm/i915/gen6+: Interpret mailbox error flags drm/i915: Reattach comment, complete type specification drm/i915: Unconditionally flush any chipset buffers before execbuf drm/i915/gen9: Drop invalid WARN() during data rate calculation drm/i915/gen9: Initialize intel_state->active_crtcs during WM sanitization (v2) drm: Reject page_flip for !DRIVER_MODESET drm/amdgpu: fix timeout value check in amd_sched_job_recovery drm/amdgpu: fix sdma_v2_4_ring_test_ib drm/amdgpu: fix amdgpu_move_blit on 32bit systems drm/radeon: fix radeon_move_blit on 32bit systems ...
2016-08-29drm/atomic: Don't potentially reset color_mgmt_changed on successive ↵Mario Kleiner
property updates. Due to assigning the 'replaced' value instead of or'ing it, if drm_atomic_crtc_set_property() gets called multiple times, the last call will define the color_mgmt_changed flag, so a non-updating call to a property can reset the flag and prevent actual hw state updates required by preceding property updates. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: <stable@vger.kernel.org> # v4.6+ Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-28Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "This lot provides: - plug a hotplug race in the new affinity infrastructure - a fix for the trigger type of chained interrupts - plug a potential memory leak in the core code - a few fixes for ARM and MIPS GICs" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mips-gic: Implement activate op for device domain irqchip/mips-gic: Cleanup chip and handler setup genirq/affinity: Use get/put_online_cpus around cpumask operations genirq: Fix potential memleak when failing to get irq pm irqchip/gicv3-its: Disable the ITS before initializing it irqchip/gicv3: Remove disabling redistributor and group1 non-secure interrupts irqchip/gic: Allow self-SGIs for SMP on UP configurations genirq: Correctly configure the trigger on chained interrupts
2016-08-28drm/msm: protect against faults from copy_from_user() in submit ioctlRob Clark
An evil userspace could try to cause deadlock by passing an unfaulted-in GEM bo as submit->bos (or submit->cmds) table. Which will trigger msm_gem_fault() while we already hold struct_mutex. See: https://github.com/freedreno/msmtest/blob/master/evilsubmittest.c Cc: stable@vger.kernel.org Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-08-28drm/msm: fix use of copy_from_user() while holding spinlockRob Clark
Use instead __copy_from_user_inatomic() and fallback to slow-path where we drop and re-aquire the lock in case of fault. Cc: stable@vger.kernel.org Reported-by: Vaishali Thakkar <vaishali.thakkar@oracle.com> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-08-28Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A few updates for timers & co: - prevent a livelock in the timekeeping code when debugging is enabled - prevent out of bounds access in the timekeeping debug code - various fixes in clocksource drivers - a new maintainers entry" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/sun4i: Clear interrupts after stopping timer in probe function drivers/clocksource/pistachio: Fix memory corruption in init clocksource/drivers/timer-atmel-pit: Enable mck clock clocksource/drivers/pxa: Fix include files for compilation MAINTAINERS: Add ARM ARCHITECTED TIMER entry timekeeping: Cap array access in timekeeping_debug timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING
2016-08-28nvme-rdma: Get rid of redundant definesSagi Grimberg
Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-08-28nvme-rdma: Get rid of duplicate variableSagi Grimberg
We already have need_inval in ib_mr, lets use that instead. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-08-26Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge fixes from Andrew Morton: "11 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: silently skip readahead for DAX inodes dax: fix device-dax region base fs/seq_file: fix out-of-bounds read mm: memcontrol: avoid unused function warning mm: clarify COMPACTION Kconfig text treewide: replace config_enabled() with IS_ENABLED() (2nd round) printk: fix parsing of "brl=" option soft_dirty: fix soft_dirty during THP split sysctl: handle error writing UINT_MAX to u32 fields get_maintainer: quiet noisy implicit -f vcs_file_exists checking byteswap: don't use __builtin_bswap*() with sparse
2016-08-26Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "Round one of 4.8 rc fixes. This should be the bulk of the -rc fixes for 4.8. I only have a few things that are still outstanding (two ipoib bugs for which the solution is not yet fully known, and a few queued items that came in after my last push and I didn't want to delay this pull request for late comers again). Even though the patch count is kind of high, everything is minor fixes so the overall churn is pretty low. Summary: - minor fixes to cxgb4 - minor fixes to mlx4 - one minor fix each to core, rxe, isert, srpt, mlx5, ocrdma, and usnic - six or so fixes to i40iw fixes - the rest are hfi1 fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (34 commits) i40iw: Send last streaming mode message for loopback connections IB/srpt: Update sport->port_guid with each port refresh RDMA/ocrdma: Fix the max_sge reported from FW i40iw: Avoid writing to freed memory i40iw: Fix double free of allocated_buffer IB/mlx5: Remove superfluous include of io-mapping.h i40iw: Do not set self-referencing pointer to NULL after kfree i40iw: Add missing NULL check for MPA private data iw_cxgb4: Fix cxgb4 arm CQ logic w/IB_CQ_REPORT_MISSED_EVENTS i40iw: Add missing check for interface already open i40iw: Protect req_resource_num update i40iw: Change mem_resources pointer to a u8 IB/core: Use memdup_user() rather than duplicating its implementation IB/qib: Use memdup_user() rather than duplicating its implementation iw_cxgb4: use the MPA initiator's IRD if < our ORD iw_cxgb4: limit IRD/ORD advertised to ULP by device max. IB/hfi1: Fix mm_struct use after free IB/rdmvat: Fix double vfree() in rvt_create_qp() error path IB/hfi1: Improve J_KEY generation IB/hfi1: Return invalid field for non-QSFP CableInfo queries ...
2016-08-26net: ethernet: ti: cpsw: fix error return code in cpsw_set_channels()Wei Yongjun
Fix to return a negative error code from the cpsw_fill_rx_channels() error handling case instead of 0, as done elsewhere in this function. Fixes: ce52c744574b ("net: ethernet: ti: cpsw: add ethtool channels support") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26vxlan: remove the useless header file protocol.hZhu Yanjun
This header file is not used in vxlan.c file. Signed-off-by: Zhu Yanjun <zyjzyj2000@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26chcr: Fix non static symbol warningWei Yongjun
Fixes the following sparse warning: drivers/crypto/chelsio/chcr_algo.c:593:5: warning: symbol 'cxgb4_is_crypto_q_full' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26sfc: work around TRIGGER_INTERRUPT command not working on SFC9140Jon Cooper
MC_CMD_TRIGGER_INTERRUPT does not work on the SFC9140, as used in the sfn7x42q and sfn7x24f. Check for this using the MCDI workaround mechanism. The command is only used during self test. If it's not supported, skip the interrupt test. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26sfc: remove duplicate assignmentEdward Cree
nic_data was already initialised to the right thing, no need to assign it again. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26sfc: include size-binned TX stats on sfn8542qEdward Cree
TX size bins were not supported on the 7000's 40G MAC, but the 8000 series does support them and the MCPU advertises that via a new capability bit. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26sfc: fix potential stack corruption from running past stat bitmaskAndrew Rybchenko
On 32-bit systems, mask is only an array of 3 longs, not 4, so don't try to write to mask[3]. Also include build-time checks in case the size of the bitmask changes. Fixes: 3c36a2aded8c ("sfc: display vadaptor statistics for all interfaces") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26net: dsa: bcm_sf2: Utilize mask clear/set helpers in bcm_sf2_intr_disableFlorian Fainelli
And while at it, remove the unecessary writing of zeroes to the CPU_MASK_CLEAR register since it has no functional use. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26alx: add tso supportTobias Regnery
Add tso/tso6 support to the alx driver. Based on information from the downstream driver at github.com/qca/alx Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26net: ethernet: mediatek: modify GDM to send packets to the PDMA for RXNelson Chang
Because we change to use the PDMA as the Ethernet RX DMA engine, the patch modifies to set GDM to send packets to PDMA for RX. Acked-by: John Crispin <john@phrozen.org> Signed-off-by: Nelson Chang <nelson.chang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26net: ethernet: mediatek: modify to use the PDMA instead of the QDMA for ↵Nelson Chang
Ethernet RX Because the PDMA has richer features than the QDMA for Ethernet RX (such as multiple RX rings, HW LRO, etc.), the patch modifies to use the PDMA to handle Ethernet RX. Acked-by: John Crispin <john@phrozen.org> Signed-off-by: Nelson Chang <nelson.chang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26Merge tag 'dm-4.8-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - another stable fix for DM flakey (that tweaks the previous fix that didn't factor in expected 'drop_writes' behavior for read IO). - a dm-log bio operation flags fix for the broader block changes that were merged during the 4.8 merge window. * tag 'dm-4.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm log: fix unitialized bio operation flags dm flakey: fix reads to be issued if drop_writes configured
2016-08-26Merge tag 'iommu-fixes-v4.8-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "Fixes from Will Deacon: - fix a couple of thinkos in the CMDQ error handling and short-descriptor page table code that have been there since day one - disable stalling faults, since they may result in hardware deadlock - fix an accidental BUG() when passing disable_bypass=1 on the cmdline" * tag 'iommu-fixes-v4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/arm-smmu: Don't BUG() if we find aborting STEs with disable_bypass iommu/arm-smmu: Disable stalling faults for all endpoints iommu/arm-smmu: Fix CMDQ error handling iommu/io-pgtable-arm-v7s: Fix attributes when splitting blocks
2016-08-26Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Here's a set of block fixes for the current 4.8-rc release. This contains: - a fix for a secure erase regression, from Adrian. - a fix for an mmc use-after-free bug regression, also from Adrian. - potential zero pointer deference in bdev freezing, from Andrey. - a race fix for blk_set_queue_dying() from Bart. - a set of xen blkfront fixes from Bob Liu. - three small fixes for bcache, from Eric and Kent. - a fix for a potential invalid NVMe state transition, from Gabriel. - blk-mq CPU offline fix, preventing us from issuing and completing a request on the wrong queue. From me. - revert two previous floppy changes, since they caused a user visibile regression. A better fix is in the works. - ensure that we don't send down bios that have more than 256 elements in them. Fixes a crash with bcache, for example. From Ming. - a fix for deferencing an error pointer with cgroup writeback. Fixes a regression. From Vegard" * 'for-linus' of git://git.kernel.dk/linux-block: mmc: fix use-after-free of struct request Revert "floppy: refactor open() flags handling" Revert "floppy: fix open(O_ACCMODE) for ioctl-only open" fs/block_dev: fix potential NULL ptr deref in freeze_bdev() blk-mq: improve warning for running a queue on the wrong CPU blk-mq: don't overwrite rq->mq_ctx block: make sure a big bio is split into at most 256 bvecs nvme: Fix nvme_get/set_features() with a NULL result pointer bdev: fix NULL pointer dereference xen-blkfront: free resources if xlvbd_alloc_gendisk fails xen-blkfront: introduce blkif_set_queue_limits() xen-blkfront: fix places not updated after introducing 64KB page granularity bcache: pr_err: more meaningful error message when nr_stripes is invalid bcache: RESERVE_PRIO is too small by one when prio_buckets() is a power of two. bcache: register_bcache(): call blkdev_put() when cache_alloc() fails block: Fix race triggered by blk_set_queue_dying() block: Fix secure erase nvme: Prevent controller state invalid transition
2016-08-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "Simply small driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ads7846 - remove redundant regulator_disable call Input: synaptics-rmi4 - fix register descriptor subpacket map construction Input: tegra-kbc - fix inverted reset logic Input: silead - use devm_gpiod_get Input: i8042 - set up shared ps2_cmd_mutex for AUX ports
2016-08-26Merge tag 'pci-v4.8-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Resource management: - Update "pci=resource_alignment" documentation (Mathias Koehrer) MSI: - Use positive flags in pci_alloc_irq_vectors() (Christoph Hellwig) - Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors() (Christoph Hellwig) Intel VMD host bridge driver: - Fix infinite loop executing irq's (Keith Busch)" * tag 'pci-v4.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: x86/PCI: VMD: Fix infinite loop executing irq's PCI: Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors() PCI: Use positive flags in pci_alloc_irq_vectors() PCI: Update "pci=resource_alignment" documentation
2016-08-26dax: fix device-dax region baseDan Williams
The data offset for a dax region needs to account for a reservation in the resource range. Otherwise, device-dax is allowing mappings directly into the memmap or device-info-block area with crash signatures like the following: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: get_zone_device_page+0x11/0x30 Call Trace: follow_devmap_pmd+0x298/0x2c0 follow_page_mask+0x275/0x530 __get_user_pages+0xe3/0x750 __gfn_to_pfn_memslot+0x1b2/0x450 [kvm] tdp_page_fault+0x130/0x280 [kvm] kvm_mmu_page_fault+0x5f/0xf0 [kvm] handle_ept_violation+0x94/0x180 [kvm_intel] vmx_handle_exit+0x1d3/0x1440 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x81d/0x16a0 [kvm] kvm_vcpu_ioctl+0x33c/0x620 [kvm] do_vfs_ioctl+0xa2/0x5d0 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x1a/0xa4 Fixes: ab68f2622136 ("/dev/dax, pmem: direct access to persistent memory") Link: http://lkml.kernel.org/r/147205536732.1606.8994275381938837346.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reported-by: Abhilash Kumar Mulumudi <m.abhilash-kumar@hpe.com> Reported-by: Toshi Kani <toshi.kani@hpe.com> Tested-by: Toshi Kani <toshi.kani@hpe.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-26net: dsa: bcm_sf2: Remove duplicate codeFlorian Fainelli
Now that we are using b53_common for most VLAN, FDB and bridge operations, delete all the redundant code that we had in bcm_sf2.c to keep only the integration specific logic that we have to deal with: power management, link management and the external interfaces (RGMII, MDIO). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26net: dsa: bcm_sf2: Utilize core B53 driver when possibleFlorian Fainelli
The Broadcom Starfighter2 is almost entirely register compatible with B53, yet for historical reasons came up first in the tree and is now being updated to utilize b53_common.c to the fullest extent possible. A few things need to be adjusted to allow that: - the switch "core" registers currently operate on a 32-bit address, whereas b53 passes a page + reg pair to offset from, so we need to convert that, thankfully there is a generic formula to do that - the link managemenent is not self contained with the B53/CORE register set, but instead is in the SWITCH_REG block which is part of the integration glue logic, so we keep that entirely custom here because this really is part of the existing bcm_sf2 implementation - there are additional power management constraints on the port's memories that make us keep the port_enable/disable callbacks custom for now, also, we support tagging whereas b53_common does not support that yet All the VLAN and bridge code is entirely identical though so, avoid duplicating it. Other things will be migrated in the future like EEE and possibly Wake-on-LAN. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26net: dsa: b53: Add JOIN_ALL_VLAN supportFlorian Fainelli
In order to migrate the bcm_sf2 driver over to the b53 driver for most VLAN/FDB/bridge operations, we need to add support for the "join all VLANs" register and behavior which allows us to make a given port join all VLANs and avoid setting specific VLAN entries when it is leaving the bridge. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26net: dsa: b53: Define SF2 MIB layoutFlorian Fainelli
The 58xx and 7445 chips use the Starfighter2 code, define its MIB layout and introduce a helper function: is58xx() which checks for both of these IDs for now. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26net: dsa: b53: Prepare to support 7445 switchFlorian Fainelli
Allocate a device entry for the Broadcom BCM7445 integrated switch currently backed by bcm_sf2.c. Since this is the latest generation, it has 4 ARL entries, 4K VLANs and uses Port 8 for the CPU/IMP port. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26net: dsa: b53: Initialize ds->ops in b53_switch_allocFlorian Fainelli
In order to allow drivers to override specific dsa_switch_driver callbacks, initialize ds->ops to b53_switch_ops earlier, which avoids having to expose this structure to glue drivers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26mlxsw: spectrum: Mirror certain packets to CPUIdo Schimmel
Instead of trapping certain packets to the CPU and then relying on it to flood them we can instead make the device mirror them. The following packet types are mirrored: * DHCP: Broadcast packets that should be flooded by the device, but also trapped in case CPU is running the DHCP server. * IGMP query: Multicast packets that need to be forwarded to other bridge ports, but also trapped so that receiving netdev will be marked as a router port by the bridge driver. * ARP request: Broadcast packets that should be forwarded to other bridge ports, but also trapped in case requested IP is of the local machine. * ARP response: Unicast packets that should be forwarded by the bridge but also trapped in case response is directed at us. Set the trap action of such packets to mirror and mark them using 'offload_fwd_mark' to prevent the bridge driver from forwarding them itself. Note that OSPF packets are also marked despite their action being trap. The reason for this is that the device traps such packets in the pipeline after they were already flooded. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26mlxsw: spectrum: Allow different traps to have different actionsIdo Schimmel
Up until now we only trapped packets to CPU, but we are going to allow some packets to be mirrored (trap & forward) to CPU. Extend the Rx listener with 'action' member. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26mlxsw: spectrum: Simplify traps definitionIdo Schimmel
Instead of copying & pasting the same struct initialization for every Rx listener, just use a macro. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26bridge: switchdev: Add forward mark support for stacked devicesIdo Schimmel
switchdev_port_fwd_mark_set() is used to set the 'offload_fwd_mark' of port netdevs so that packets being flooded by the device won't be flooded twice. It works by assigning a unique identifier (the ifindex of the first bridge port) to bridge ports sharing the same parent ID. This prevents packets from being flooded twice by the same switch, but will flood packets through bridge ports belonging to a different switch. This method is problematic when stacked devices are taken into account, such as VLANs. In such cases, a physical port netdev can have upper devices being members in two different bridges, thus requiring two different 'offload_fwd_mark's to be configured on the port netdev, which is impossible. The main problem is that packet and netdev marking is performed at the physical netdev level, whereas flooding occurs between bridge ports, which are not necessarily port netdevs. Instead, packet and netdev marking should really be done in the bridge driver with the switch driver only telling it which packets it already forwarded. The bridge driver will mark such packets using the mark assigned to the ingress bridge port and will prevent the packet from being forwarded through any bridge port sharing the same mark (i.e. having the same parent ID). Remove the current switchdev 'offload_fwd_mark' implementation and instead implement the proposed method. In addition, make rocker - the sole user of the mark - use the proposed method. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26team: loadbalance: push lacpdus to exact deliveryJiri Pirko
When team is in bridge and LACP is utilized, LACPDU packets are pushed to userspace using raw socket and there they are processed. However, since 8626c56c8279b, LACPDU skbs are dropped by bridge rx_handler so they never reach packet handlers in rx path. Fix this by explicity treat LACPDUs to be pushed to exact delivery in team rx_handler. Reported-by: Ido Schimmel <idosch@mellanox.com> Fixes: 8626c56c8279b ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26net: hns: dereference ppe_cb->ppe_common_cb if it is non-nullColin Ian King
ppe_cb->ppe_common_cb is being dereferenced before a null check is being made on it. If ppe_cb->ppe_common_cb is null then we end up with a null pointer dereference when assigning dsaf_dev. Fix this by moving the initialisation of dsaf_dev once we know ppe_cb->ppe_common_cb is OK to dereference. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26veth: sctp: add NETIF_F_SCTP_CRC to device featuresXin Long
Commit b17c706987fa ("loopback: sctp: add NETIF_F_SCTP_CSUM to device features") added NETIF_F_SCTP_CRC to device features for lo device to improve the performance of sctp over lo. This patch is to add NETIF_F_SCTP_CRC to device features for veth to improve the performance of sctp over veth. Before this patch: ip netns exec cs_client netperf -H 10.167.12.2 -t SCTP_STREAM -- -m 10K Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 212992 212992 10240 10.00 1117.16 After this patch: ip netns exec cs_client netperf -H 10.167.12.2 -t SCTP_STREAM -- -m 10K Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 212992 212992 10240 10.20 1415.22 Tested-by: Li Shuang <tjlishuang@yeah.net> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26IB/hfi1: Clean up type used and castingChristophe Jaillet
In all other places in this file where 'find_first_bit' is called, port_num is defined as a 'u8' and no casting is done. Do the same here in order to be more consistent. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-26i40iw: Receive notification events correctlyShiraz Saleem
Device notifications are not received after the first interface is closed; since there is an unregister for notifications on every interface close. Correct this by unregistering for device notifications only when the last interface is closed. Also, make all operations on the i40iw_notifiers_registered atomic as it can be read/modified concurrently. Fixes: 8e06af711bf2 ("i40iw: add main, hdr, status") Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-26i40iw: Update hw_iwarp_stateMustafa Ismail
Update iwqp->hw_iwarp_state to reflect the new state of the CQP modify QP operation. This avoids reissuing a CQP operation to modify a QP to a state that it is already in. Fixes: 4e9042e647ff ("i40iw: add hw and utils files") Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-26clocksource/drivers/sun4i: Clear interrupts after stopping timer in probe ↵Chen-Yu Tsai
function The bootloader (U-boot) sometimes uses this timer for various delays. It uses it as a ongoing counter, and does comparisons on the current counter value. The timer counter is never stopped. In some cases when the user interacts with the bootloader, or lets it idle for some time before loading Linux, the timer may expire, and an interrupt will be pending. This results in an unexpected interrupt when the timer interrupt is enabled by the kernel, at which point the event_handler isn't set yet. This results in a NULL pointer dereference exception, panic, and no way to reboot. Clear any pending interrupts after we stop the timer in the probe function to avoid this. Cc: stable@vger.kernel.org Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-08-26drivers/clocksource/pistachio: Fix memory corruption in initMarcin Nowakowski
Driver init code incorrectly uses the block base address and as a result clears clocksource structure's fields instead of the hardware registers. Commit 09a998201649 ("timekeeping: Lift clocksource cacheline restriction") has changed the offsets within pistachio_clocksource structure and what has previously gone unnoticed now leads to a kernel panic during boot. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-08-26clocksource/drivers/timer-atmel-pit: Enable mck clockAlexandre Belloni
mck is needed to get the PIT working. Explicitly prepare_enable it instead of assuming it is enabled. This solves an issue where the system is freezing when the ETM/ETB drivers are enabled. Reported-by: Olivier Schonken <olivier.schonken@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-08-26bus: arm-ccn: make event groups reliableMark Rutland
The CCN PMU driver leaves the counting logic always enabled, and thus events are enabled while groups are manipulated. As each event is stopped and read individually, this leads to arbitrary skew across event groups, which can be seen if counting several identical events. To avoid this, implement pmu_{enable,disable} callbacks to stop and start all counters atomically around event manipulation. As the counters are now stopped, we cannot poll the cycle counter to wait for events to drain from the bus. However, as the counters are stopped and the events will not be read regardless, we can simply allow the bus to drain naturally. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2016-08-26bus: arm-ccn: fix hrtimer registrationMark Rutland
The CCN PMU driver has a single hrtimer, used to simulate a periodic interrupt on systems where the overflow interrupt is not possible to use. The hrtimer is started when any event is started, and cancelled when any event is stopped. Thus, stopping a single event is sufficient to disable to hrtimer, and overflows (of other events) may be lost. To avoid this, this patch reworks the hrtimer start/cancel to only occur when the first event is added to a PMU, and the last event removed, making use of the existing bitmap counting active events. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
generated by cgit (git 2.34.1) at 2025-09-15 04:51:59 +0000