summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-06-30mwifiex: do not update MCS set from hostapdGanapathi Bhat
We should not copy the MCS set from hostapd RX-STBC. We have to just use the MCS set supported by the hardware. This fixes an issue, where mwifiex is advertising wrong MCS sets in beacons. Fixes: 474a41e94dfc ("mwifiex: update MCS set as per RX-STBC bit from hostapd") Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-30brcmfmac: switch to using cfg80211_connect_done()Arend van Spriel
The driver used cfg80211_connect_result() which is basically a wrapper around cfg80211_connect_done() passing a subset of the information that can be passed. For upcoming functionality this is not sufficient so switching to use cfg80211_connect_done(). Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-30brcmfmac: support 4-way handshake offloading for 802.1XArend van Spriel
Adding callbacks for PMK provisioning. If firmware supports offloading it is indicated to user-space that 802.1X offload is supported. Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-30brcmfmac: support 4-way handshake offloading for WPA/WPA2-PSKArend van Spriel
The firmware may have supplicant code built-in. This is detected by the driver and indicated in the wiphy features flags. User-space can use this flag to determine whether or not to provide the pre-shared key material in the nl80211 CONNECT command. Reviewed-by: Gautam (Gautam Kumar) Shukla <gautams@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-30dmaengine: tegra-apb: Really fix runtime-pm usageJon Hunter
Commit edd3bdbe9db1 ("dmaengine: tegra-apb: Correct runtime-pm usage") added pm_runtime_get/put() calls to the tegra-apb DMA system suspend callbacks. Runtime PM is disabled during system suspend and so these APIs cannot be used. Fix the suspend handling for the tegra-apb DMA by moving the save and restore of the DMA register context into the runtime PM suspend and resume callbacks, and then use the pm_runtime_force_suspend/resume() APIs to invoke the runtime PM callbacks during system suspend. Fixes: edd3bdbe9db1 ("dmaengine: tegra-apb: Correct runtime-pm usage") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-29clk: gemini: Read status before using the valueJoel Stanley
The probe does a shift and mask of val without having read it from the hardware. Fixes: 846423f96721 ("clk: Add Gemini SoC clock controller") Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-29clk: scpi: error when clock fails to registerJerome Brunet
Current implementation of scpi_clk_add just print a warning when clock fails to register but then keep going as if nothing happened. The provider is then registered with bogus data. This may latter lead to an Oops in __clk_create_clk when hlist_add_head(&clk->clks_node, &hw->core->clks) is called. This patch fixes the issue and errors if a clock fails to register. Fixes: cd52c2a4b5c4 ("clk: add support for clocks provided by SCP(System Control Processor)") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-29clk: at91: Add sama5d2 suspend/resumeAlexandre Belloni
On sama5d2, VDD core maybe be cut while in suspend. This means registers will be lost. Ensure they are saved and restored properly. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-29libnvdimm, btt: fix btt_rw_page not returning errorsVishal Verma
btt_rw_page was not propagating errors frm btt_do_bvec, resulting in any IO errors via the rw_page path going unnoticed. the pmem driver recently fixed this in e10624f pmem: fail io-requests to known bad blocks but same problem in BTT went neglected. Fixes: 5212e11fde4d ("nd_btt: atomic sector updates") Cc: <stable@vger.kernel.org> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-29usbdevfs: get rid of field-by-field copyinAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-29take floppy compat ioctls to sodding floppy.cAl Viro
all other drivers recognizing those ioctls are very much *not* biarch. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-29spidev: quit messing with access_ok()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-29fs: implement vfs_iter_write using do_iter_writeChristoph Hellwig
De-dupliate some code and allow for passing the flags argument to vfs_iter_write. Additionally it now properly updates timestamps. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-29fs: implement vfs_iter_read using do_iter_readChristoph Hellwig
De-dupliate some code and allow for passing the flags argument to vfs_iter_read. Additional it properly updates atime now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Need to access netdev->num_rx_queues behind an accessor in netvsc driver otherwise the build breaks with some configs, from Arnd Bergmann. 2) Add dummy xfrm_dev_event() so that build doesn't fail when CONFIG_XFRM_OFFLOAD is not set. From Hangbin Liu. 3) Don't OOPS when pfkey_msg2xfrm_state() signals an erros, from Dan Carpenter. 4) Fix MCDI command size for filter operations in sfc driver, from Martin Habets. 5) Fix UFO segmenting so that we don't calculate incorrect checksums, from Michal Kubecek. 6) When ipv6 datagram connects fail, reset destination address and port. From Wei Wang. 7) TCP disconnect must reset the cached receive DST, from WANG Cong. 8) Fix sign extension bug on 32-bit in dev_get_stats(), from Eric Dumazet. 9) fman driver has to depend on HAS_DMA, from Madalin Bucur. 10) Fix bpf pointer leak with xadd in verifier, from Daniel Borkmann. 11) Fix negative page counts with GFO, from Michal Kubecek. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) sfc: fix attempt to translate invalid filter ID net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish() bpf: prevent leaking pointer via xadd on unpriviledged arcnet: com20020-pci: add missing pdev setup in netdev structure arcnet: com20020-pci: fix dev_id calculation arcnet: com20020: remove needless base_addr assignment Trivial fix to spelling mistake in arc_printk message arcnet: change irq handler to lock irqsave rocker: move dereference before free mlxsw: spectrum_router: Fix NULL pointer dereference net: sched: Fix one possible panic when no destroy callback virtio-net: serialize tx routine during reset net: usb: asix88179_178a: Add support for the Belkin B2B128 fsl/fman: add dependency on HAS_DMA net: prevent sign extension in dev_get_stats() tcp: reset sk_rx_dst in tcp_disconnect() net: ipv6: reset daddr and dport in sk if connect() fails bnx2x: Don't log mc removal needlessly bnxt_en: Fix netpoll handling. bnxt_en: Add missing logic to handle TPA end error conditions. ...
2017-06-29cpufreq: intel_pstate: Clean up after performance governor changesRafael J. Wysocki
After commit 82b4e03e01bc (intel_pstate: skip scheduler hook when in "performance" mode) get_target_pstate_use_performance() and get_target_pstate_use_cpu_load() are never called if scaling_governor is "performance", so drop the CPUFREQ_POLICY_PERFORMANCE checks from them as they will never trigger anyway. Moreover, the documentation needs to be updated to reflect the change made by the above commit, so do that too. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2017-06-29Merge tag 'for-4.12/dm-fixes-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - dm thinp fix for crash that will occur when metadata device failure races with discard passdown to the underlying data device. - dm raid fix to not access the superblock's >= 1.9.0 'sectors' member unconditionally. * tag 'for-4.12/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin: do not queue freed thin mapping for next stage processing dm raid: fix oops on upgrading to extended superblock format
2017-06-29Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Two fixes that should go into this release. One is an nvme regression fix from Keith, fixing a missing queue freeze if the controller is being reset. This causes the reset to hang. The other is a fix for a leak of the bio protection info, if smaller sized O_DIRECT is used. This fix should be more involved as we have other problematic paths in the kernel, but given as this isn't a regression in this series, we'll tackle those for 4.13" * 'for-linus' of git://git.kernel.dk/linux-block: block: provide bio_uninit() free freeing integrity/task associations nvme/pci: Fix stuck nvme reset
2017-06-29cpuidle: menu: allow state 0 to be disabledNicholas Piggin
The menu driver does not allow state0 to be disabled completely. If it is disabled but other enabled states don't meet latency requirements, it is still used. Fix this by starting with the first enabled idle state. Fall back to state 0 if no idle states are enabled (arguably this should be -EINVAL if it is attempted, but this is the minimal fix). Acked-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-29intel_idle: Use more common logging styleJoe Perches
Remove #define PREFIX and add #define pr_fmt to use more common logging. Miscellanea: o Add missing newline to format o Convert a single printk without KERN_<LEVEL> to pr_info Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-29acpi, nfit: quiet invalid block-aperture-region warningsDan Williams
This state is already visible by userspace since the BLK region will not be enabled, and it is otherwise benign as it usually indicates that the DIMM is not configured. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-29libnvdimm, btt: BTT updates for UEFI 2.7 formatVishal Verma
The UEFI 2.7 specification defines an updated BTT metadata format, bumping the revision to 2.0. Add support for the new format, while retaining compatibility for the old 1.1 format. Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Linda Knippers <linda.knippers@hpe.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-29acpi, nfit: constify *_attribute_groupArvind Yadav
File size before: text data bss dec hex filename 20792 1580 994 23366 5b46 drivers/acpi/nfit/core.o File size After adding 'const': text data bss dec hex filename 20968 1388 994 23350 5b36 drivers/acpi/nfit/core.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-29sfc: fix attempt to translate invalid filter IDEdward Cree
When filter insertion fails with no rollback, we were trying to convert EFX_EF10_FILTER_ID_INVALID to an id to store in 'ids' (which is either vlan->uc or vlan->mc). This would WARN_ON_ONCE and then record a bogus filter ID of 0x1fff, neither of which is a good thing. Fixes: 0ccb998bf46d ("sfc: fix filter_id misinterpretation in edge case") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29net/mlx4_en: Do not allocate redundant TX queues when TC is disabledInbar Karmy
Currently the number of TX queues that are allocated doesn't depend on the number of TCs, the module always loads with max num of UP per channel. In order to prevent the allocation of unnecessary memory, the module will load with minimum number of UPs per channel, and the user will be able to control the number of TX queues per channel by changing the number of TC to 8 using the tc command. The variable num_up will hold the information about the current number of UPs. Due to the change, needed to remove the lines that set the value of UP to be different than zero in the func "mlx4_en_select_queue", since now the num of TX queues that are allocated is only one per channel in default. In order not to force the UP to be zero in case of only one TC, added a condition before forcing it in the func "mlx4_en_fill_qp_context". Tested: After the module is loaded with minimum number of UP per channel, to increase num of TCs to 8, use: tc qdisc add dev ens8 root mqprio num_tc 8 In order to decrease the number of TCs to minimum number of UP per channel, use: tc qdisc del dev ens8 root Signed-off-by: Inbar Karmy <inbark@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Cc: Tarick Bedeir <tarick@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29net/mlx4_en: Add dynamic variable to hold the number of user priorities (UP)Inbar Karmy
Until this patch, the number of UPs was hard coded for eight. Replace this with a variable in struct "mlx4_en_port_profile". Currently, the variable will hold the maximum number of UP, as before. The patch creates an infrastructure to add an option for dynamic change of the actual number of TCs. Signed-off-by: Inbar Karmy <inbark@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Cc: Tarick Bedeir <tarick@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29net: freescale: gianfar : constify dev_pm_ops structures.Arvind Yadav
dev_pm_ops are not supposed to change at runtime. All functions working with dev_pm_ops provided by <linux/device.h> work with const dev_pm_ops. So mark the non-const structs as const. File size before: text data bss dec hex filename 19057 392 0 19449 4bf9 drivers/net/ethernet/freescale/gianfar.o File size After adding 'const': text data bss dec hex filename 19249 192 0 19441 4bf1 drivers/net/ethernet/freescale/gianfar.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29net: smc91x: constify dev_pm_ops structures.Arvind Yadav
dev_pm_ops are not supposed to change at runtime. All functions working with dev_pm_ops provided by <linux/device.h> work with const dev_pm_ops. So mark the non-const structs as const. File size before: text data bss dec hex filename 18709 401 0 19110 4aa6 drivers/net/ethernet/smsc/smc91x.o File size After adding 'const': text data bss dec hex filename 18901 201 0 19102 4a9e drivers/net/ethernet/smsc/smc91x.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29net: ibm: ibmveth: constify dev_pm_ops structures.Arvind Yadav
dev_pm_ops are not supposed to change at runtime. All functions working with dev_pm_ops provided by <linux/device.h> work with const dev_pm_ops. So mark the non-const structs as const. File size before: text data bss dec hex filename 15426 1256 0 16682 412a drivers/net/ethernet/ibm/ibmveth.o File size After adding 'const': text data bss dec hex filename 15618 1064 0 16682 412a drivers/net/ethernet/ibm/ibmveth.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29ibmvnic: Fix assignment of RX/TX IRQ'sThomas Falcon
The driver currently creates RX/TX queues during device probe, but assigns IRQ's to them during device open. On reset, however, IRQ's are assigned when resetting the queues. If there is a reset while the device is closed and the device is later opened, the driver will request IRQ's twice, causing the open to fail. This patch assigns the IRQ's in the ibmvnic_init function after the queues are reset or initialized, ensuring IRQ's are only requested once. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29amd-xgbe: fix spelling mistake: "avialable" -> "available"Colin Ian King
Trivial fix to spelling mistake in netdev_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29arcnet: com20020-pci: add support for PCIFB2 cardMichael Grzeschik
We add support for the PCIFB2 card from EAE. Beside other cards, this card has the backplane mode enabled by default. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29arcnet: com20020-pci: handle backplane mode depending on card typeMichael Grzeschik
We read the backplane mode of each subcard from bits 2 and 3 of the misc register. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29arcnet: com20020-pci: add attribute to readback backplane statusMichael Grzeschik
We add the sysfs interface the read back the backplane status of the interface. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29arcnet: add err_skb package for package status feedbackMichael Grzeschik
We need to track the status of our queued packages. This way the driving process knows if failed packages need to be retransmitted. For this purpose we queue the transferred/failed packages back into the err_skb message queue added with some status information. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29arcnet: com20020-pci: add missing pdev setup in netdev structureMichael Grzeschik
We add the pdev data to the pci devices netdev structure. This way the interface get consistent device names in the userspace (udev). Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29arcnet: com20020-pci: fix dev_id calculationMichael Grzeschik
The dev_id was miscalculated. Only the two bits 4-5 are relevant for the MA1 card. PCIARC1 and PCIFB2 use the four bits 4-7 for id selection. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29arcnet: com20020: remove needless base_addr assignmentMichael Grzeschik
The assignment is superfluous. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29Trivial fix to spelling mistake in arc_printk messageColin Ian King
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29arcnet: change irq handler to lock irqsaveMichael Grzeschik
This patch prevents the arcnet driver from the following deadlock. [ 41.273910] ====================================================== [ 41.280397] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 41.287433] 4.4.0-00034-gc0ae784 #536 Not tainted [ 41.292366] ------------------------------------------------------ [ 41.298863] arcecho/233 [HC0[0]:SC0[2]:HE0:SE0] is trying to acquire: [ 41.305628] (&(&lp->lock)->rlock){+.+...}, at: [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet] [ 41.315199] [ 41.315199] and this task is already holding: [ 41.321324] (_xmit_ARCNET#2){+.-...}, at: [<c06b934c>] packet_direct_xmit+0xfc/0x1c8 [ 41.329593] which would create a new lock dependency: [ 41.334893] (_xmit_ARCNET#2){+.-...} -> (&(&lp->lock)->rlock){+.+...} [ 41.341801] [ 41.341801] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 41.350108] (_xmit_ARCNET#2){+.-...} ... which became SOFTIRQ-irq-safe at: [ 41.357539] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.362677] [<c063ab8c>] dev_watchdog+0x5c/0x264 [ 41.367723] [<c0094edc>] call_timer_fn+0x6c/0xf4 [ 41.372759] [<c00950b8>] run_timer_softirq+0x154/0x210 [ 41.378340] [<c0036b30>] __do_softirq+0x144/0x298 [ 41.383469] [<c0036fb4>] irq_exit+0xcc/0x130 [ 41.388138] [<c0085c50>] __handle_domain_irq+0x60/0xb4 [ 41.393728] [<c0014578>] __irq_svc+0x58/0x78 [ 41.398402] [<c0010274>] arch_cpu_idle+0x24/0x3c [ 41.403443] [<c007127c>] cpu_startup_entry+0x1f8/0x25c [ 41.409029] [<c09adc90>] start_kernel+0x3c0/0x3cc [ 41.414170] [ 41.414170] to a SOFTIRQ-irq-unsafe lock: [ 41.419931] (&(&lp->lock)->rlock){+.+...} ... which became SOFTIRQ-irq-unsafe at: [ 41.427996] ... [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.433409] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.439646] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.445063] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 41.450661] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 41.455700] [<c0087548>] irq_thread+0x13c/0x1dc [ 41.460649] [<c0050f10>] kthread+0xe4/0xf8 [ 41.465158] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.470207] [ 41.470207] other info that might help us debug this: [ 41.470207] [ 41.478627] Possible interrupt unsafe locking scenario: [ 41.478627] [ 41.485763] CPU0 CPU1 [ 41.490521] ---- ---- [ 41.495279] lock(&(&lp->lock)->rlock); [ 41.499414] local_irq_disable(); [ 41.505636] lock(_xmit_ARCNET#2); [ 41.511967] lock(&(&lp->lock)->rlock); [ 41.518741] <Interrupt> [ 41.521490] lock(_xmit_ARCNET#2); [ 41.525356] [ 41.525356] *** DEADLOCK *** [ 41.525356] [ 41.531587] 1 lock held by arcecho/233: [ 41.535617] #0: (_xmit_ARCNET#2){+.-...}, at: [<c06b934c>] packet_direct_xmit+0xfc/0x1c8 [ 41.544355] the dependencies between SOFTIRQ-irq-safe lock and the holding lock: [ 41.552362] -> (_xmit_ARCNET#2){+.-...} ops: 27 { [ 41.557357] HARDIRQ-ON-W at: [ 41.560664] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.567445] [<c063ba28>] dev_deactivate_many+0x114/0x304 [ 41.574866] [<c063bc3c>] dev_deactivate+0x24/0x38 [ 41.581646] [<c0630374>] linkwatch_do_dev+0x40/0x74 [ 41.588613] [<c06305d8>] __linkwatch_run_queue+0xec/0x140 [ 41.596120] [<c0630658>] linkwatch_event+0x2c/0x34 [ 41.602991] [<c004af30>] process_one_work+0x188/0x40c [ 41.610131] [<c004b200>] worker_thread+0x4c/0x480 [ 41.616912] [<c0050f10>] kthread+0xe4/0xf8 [ 41.623048] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.629735] IN-SOFTIRQ-W at: [ 41.633039] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.639820] [<c063ab8c>] dev_watchdog+0x5c/0x264 [ 41.646508] [<c0094edc>] call_timer_fn+0x6c/0xf4 [ 41.653190] [<c00950b8>] run_timer_softirq+0x154/0x210 [ 41.660425] [<c0036b30>] __do_softirq+0x144/0x298 [ 41.667201] [<c0036fb4>] irq_exit+0xcc/0x130 [ 41.673518] [<c0085c50>] __handle_domain_irq+0x60/0xb4 [ 41.680754] [<c0014578>] __irq_svc+0x58/0x78 [ 41.687077] [<c0010274>] arch_cpu_idle+0x24/0x3c [ 41.693769] [<c007127c>] cpu_startup_entry+0x1f8/0x25c [ 41.701006] [<c09adc90>] start_kernel+0x3c0/0x3cc [ 41.707791] INITIAL USE at: [ 41.711003] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.717696] [<c063ba28>] dev_deactivate_many+0x114/0x304 [ 41.725026] [<c063bc3c>] dev_deactivate+0x24/0x38 [ 41.731718] [<c0630374>] linkwatch_do_dev+0x40/0x74 [ 41.738593] [<c06305d8>] __linkwatch_run_queue+0xec/0x140 [ 41.746011] [<c0630658>] linkwatch_event+0x2c/0x34 [ 41.752789] [<c004af30>] process_one_work+0x188/0x40c [ 41.759847] [<c004b200>] worker_thread+0x4c/0x480 [ 41.766541] [<c0050f10>] kthread+0xe4/0xf8 [ 41.772596] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.779198] } [ 41.780945] ... key at: [<c124d620>] netdev_xmit_lock_key+0x38/0x1c8 [ 41.788192] ... acquired at: [ 41.791309] [<c007bed8>] lock_acquire+0x70/0x90 [ 41.796361] [<c06f9140>] _raw_spin_lock_irqsave+0x40/0x54 [ 41.802324] [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet] [ 41.808844] [<c06b9380>] packet_direct_xmit+0x130/0x1c8 [ 41.814622] [<c06bc7e4>] packet_sendmsg+0x3b8/0x680 [ 41.820034] [<c05fe8b0>] sock_sendmsg+0x14/0x24 [ 41.825091] [<c05ffd68>] SyS_sendto+0xb8/0xe0 [ 41.829956] [<c05ffda8>] SyS_send+0x18/0x20 [ 41.834638] [<c000f780>] ret_fast_syscall+0x0/0x1c [ 41.839954] [ 41.841514] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: [ 41.850302] -> (&(&lp->lock)->rlock){+.+...} ops: 5 { [ 41.855644] HARDIRQ-ON-W at: [ 41.858945] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.865726] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.873607] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.880666] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 41.887901] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 41.894593] [<c0087548>] irq_thread+0x13c/0x1dc [ 41.901195] [<c0050f10>] kthread+0xe4/0xf8 [ 41.907338] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.914025] SOFTIRQ-ON-W at: [ 41.917328] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.924106] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.931981] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.939028] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 41.946264] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 41.952954] [<c0087548>] irq_thread+0x13c/0x1dc [ 41.959548] [<c0050f10>] kthread+0xe4/0xf8 [ 41.965689] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.972379] INITIAL USE at: [ 41.975595] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.982283] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.990063] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.997027] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 42.004172] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 42.010766] [<c0087548>] irq_thread+0x13c/0x1dc [ 42.017267] [<c0050f10>] kthread+0xe4/0xf8 [ 42.023314] [<c000f810>] ret_from_fork+0x14/0x24 [ 42.029903] } [ 42.031648] ... key at: [<bf0854cc>] __key.42091+0x0/0xfffff0f8 [arcnet] [ 42.039255] ... acquired at: [ 42.042372] [<c007bed8>] lock_acquire+0x70/0x90 [ 42.047413] [<c06f9140>] _raw_spin_lock_irqsave+0x40/0x54 [ 42.053364] [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet] [ 42.059872] [<c06b9380>] packet_direct_xmit+0x130/0x1c8 [ 42.065634] [<c06bc7e4>] packet_sendmsg+0x3b8/0x680 [ 42.071030] [<c05fe8b0>] sock_sendmsg+0x14/0x24 [ 42.076069] [<c05ffd68>] SyS_sendto+0xb8/0xe0 [ 42.080926] [<c05ffda8>] SyS_send+0x18/0x20 [ 42.085601] [<c000f780>] ret_fast_syscall+0x0/0x1c [ 42.090918] [ 42.092481] [ 42.092481] stack backtrace: [ 42.097065] CPU: 0 PID: 233 Comm: arcecho Not tainted 4.4.0-00034-gc0ae784 #536 [ 42.104751] Hardware name: Generic AM33XX (Flattened Device Tree) [ 42.111183] [<c0017ec8>] (unwind_backtrace) from [<c00139d0>] (show_stack+0x10/0x14) [ 42.119337] [<c00139d0>] (show_stack) from [<c02a82c4>] (dump_stack+0x8c/0x9c) [ 42.126937] [<c02a82c4>] (dump_stack) from [<c0078260>] (check_usage+0x4bc/0x63c) [ 42.134815] [<c0078260>] (check_usage) from [<c0078438>] (check_irq_usage+0x58/0xb0) [ 42.142964] [<c0078438>] (check_irq_usage) from [<c007aaa0>] (__lock_acquire+0x1524/0x20b0) [ 42.151740] [<c007aaa0>] (__lock_acquire) from [<c007bed8>] (lock_acquire+0x70/0x90) [ 42.159886] [<c007bed8>] (lock_acquire) from [<c06f9140>] (_raw_spin_lock_irqsave+0x40/0x54) [ 42.168768] [<c06f9140>] (_raw_spin_lock_irqsave) from [<bf083bc8>] (arcnet_send_packet+0x60/0x1c0 [arcnet]) [ 42.179115] [<bf083bc8>] (arcnet_send_packet [arcnet]) from [<c06b9380>] (packet_direct_xmit+0x130/0x1c8) [ 42.189182] [<c06b9380>] (packet_direct_xmit) from [<c06bc7e4>] (packet_sendmsg+0x3b8/0x680) [ 42.198059] [<c06bc7e4>] (packet_sendmsg) from [<c05fe8b0>] (sock_sendmsg+0x14/0x24) [ 42.206199] [<c05fe8b0>] (sock_sendmsg) from [<c05ffd68>] (SyS_sendto+0xb8/0xe0) [ 42.213978] [<c05ffd68>] (SyS_sendto) from [<c05ffda8>] (SyS_send+0x18/0x20) [ 42.221388] [<c05ffda8>] (SyS_send) from [<c000f780>] (ret_fast_syscall+0x0/0x1c) Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> --- v1 -> v2: removed unneeded zero assignment of flags Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29amd-xgbe: Adjust register settings to improve performanceLendacky, Thomas
Add support to change some general performance settings and to provide some performance settings based on the device that is probed. This includes: - Setting the maximum read/write outstanding request limit - Reducing the AXI interface burst length size - Selectively setting the Tx and Rx descriptor pre-fetch threshold - Selectively setting additional cache coherency controls Tested and verified on all versions of the hardware. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29amd-xgbe: Simplify the burst length settingsLendacky, Thomas
Currently the driver hardcodes the PBLx8 setting. Remove the need for specifying the PBLx8 setting and automatically calculate based on the specified PBL value. Since the PBLx8 setting applies to both Tx and Rx use the same PBL value for both of them. Also, the driver currently uses a bit field to set the AXI master burst len setting. Change to the full bit field range and set the burst length based on the specified value. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29amd-xgbe: Prepare for more fine grained cache coherency controlsLendacky, Thomas
In prep for setting fine grained read and write DMA cache coherency controls, allow specific values to be used to set the cache coherency registers. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29amd-xgbe: Add NUMA affinity support for IRQ hintsLendacky, Thomas
For IRQ affinity, set the affinity hints for the IRQs to be (initially) on the processors corresponding to the NUMA node of the device. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29amd-xgbe: Add NUMA affinity support for memory allocationsLendacky, Thomas
Add support to perform memory allocations on the node of the device. The original allocation or the ring structure and Tx/Rx queues allocated all of the memory at once and then carved it up for each channel and queue. To best ensure that we get as much memory from the NUMA node as we can, break the channel and ring allocations into individual allocations. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29amd-xgbe: Re-issue interrupt if interrupt status not clearedLendacky, Thomas
Some of the device interrupts should function as level interrupts. For some hardware configurations this requires setting some control bits so that if the interrupt status has not been cleared the interrupt should be reissued. Additionally, when using MSI or MSI-X interrupts, run the interrupt service routine as a tasklet so that the re-issuance of the interrupt is handled properly. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29amd-xgbe: Limit the I2C error messages that are outputLendacky, Thomas
When I2C communication fails, it tends to always fail. Rather than continuously issue an error message (once per second in most cases), change the message to be issued just once. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29amd-xgbe: Fixes for working with PHYs that support 2.5GbELendacky, Thomas
The driver has some missing functionality when operating in the mode that supports 2.5GbE. Fix the driver to fully recognize and support this speed. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29amd-xgbe: Handle return code from software reset functionLendacky, Thomas
Currently the function that performs a software reset of the hardware provides a return code. During driver probe check this return code and exit with an error if the software reset fails. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29amd-xgbe: Prevent looping forever if timestamp update failsLendacky, Thomas
Just to be on the safe side, should the update of the timestamp registers not complete, issue a warning rather than looping forever waiting for the update to complete. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 01:06:42 +0000