| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-07-26
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Unregister devlink params in case interface is down
net/mlx5: DR, Fix peer domain namespace setting
net/mlx5: fs_chains: Fix ft prio if ignore_flow_level is not supported
net/mlx5e: kTLS, Fix protection domain in use syndrome when devlink reload
net/mlx5: Bridge, set debugfs access right to root-only
net/mlx5e: xsk: Fix crash on regular rq reactivation
net/mlx5e: xsk: Fix invalid buffer access for legacy rq
net/mlx5e: Move representor neigh cleanup to profile cleanup_tx
net/mlx5e: Fix crash moving to switchdev mode when ntuple offload is set
net/mlx5e: Don't hold encap tbl lock if there is no encap action
net/mlx5: Honor user input for migratable port fn attr
net/mlx5e: fix return value check in mlx5e_ipsec_remove_trailer()
net/mlx5: fix potential memory leak in mlx5e_init_rep_rx
net/mlx5: DR, fix memory leak in mlx5dr_cmd_create_reformat_ctx
net/mlx5e: fix double free in macsec_fs_tx_create_crypto_table_groups
====================
Link: https://lore.kernel.org/r/20230726213206.47022-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
in bcm_sf2_sw_probe(), check the return value of clk_prepare_enable()
and return the error code if clk_prepare_enable() returns an
unexpected value.
Fixes: e9ec5c3bd238 ("net: dsa: bcm_sf2: request and handle clocks")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230726170506.16547-1-ruc_gongyuanjun@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The condition to fetch sense data was supposed to be:
ATA_SENSE set AND either
1) Command was NCQ and ATA_DFLAG_CDL_ENABLED flag set (flag
ATA_DFLAG_CDL_ENABLED will only be set if the Successful NCQ command
sense data supported bit is set); or
2) Command was non-NCQ and regular sense data reporting is enabled.
However the check in 2) accidentally had the negation at the wrong place,
causing it to try to fetch sense data if it was a non-NCQ command _or_
if regular sense data reporting was _not_ enabled.
Fix this by removing the extra parentheses that should not be there,
such that only the correct return (ata_is_ncq()) is negated.
Fixes: 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD")
Reported-by: Borislav Petkov <bp@alien8.de>
Closes: https://lore.kernel.org/linux-ide/20230722155621.GIZLv8JbURKzHtKvQE@fat_crate.local/
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.5-rc4
Display:
+ Fix to correct the UBWC programming for decoder version 4.3 seen
on SM8550
+ Add the missing flush and fetch bits for DMA4 and DMA5 SSPPs.
+ Fix to drop the unused dpu_core_perf_data_bus_id enum from the code
+ Drop the unused dsi_phy_14nm_17mA_regulators from QCM 2290 DSI cfg.
GPU:
+ Fix warn splat for newer devices without revn
+ Remove name/revn for a690.. we shouldn't be populating these for
newer devices, for consistency, but it slipped through review
+ Fix a6xx gpu snapshot BINDLESS_DATA size (was listed in bytes
instead of dwords, causing AHB faults on a6xx gen4/a660-family)
+ Disallow submit with fence id 0
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs9MwCSfiyv8i7yWAsJKYEzCDyzaTx=ujX80Y23rZd9RA@mail.gmail.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.5-2023-07-26:
amdgpu:
- gfxhub partition fix
- Fix error handling in psp_sw_init()
- SMU13 fix
- DCN 3.1 fix
- DCN 3.2 fix
- Fix for display PHY programming sequence
- DP MST error handling fix
- GFX 9.4.3 fix
amdkfd:
- GFX11 trap handling fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230726184936.7812-1-alexander.deucher@amd.com
|
|
The global function triggers a warning because of the missing prototype
drivers/ata/pata_ns87415.c:263:6: warning: no previous prototype for 'ns87560_tf_read' [-Wmissing-prototypes]
263 | void ns87560_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
There are no other references to this, so just make it static.
Fixes: c4b5b7b6c4423 ("pata_ns87415: Initial cut at 87415/87560 IDE support")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, netfilter.
Current release - regressions:
- core: fix splice_to_socket() for O_NONBLOCK socket
- af_unix: fix fortify_panic() in unix_bind_bsd().
- can: raw: fix lockdep issue in raw_release()
Previous releases - regressions:
- tcp: reduce chance of collisions in inet6_hashfn().
- netfilter: skip immediate deactivate in _PREPARE_ERROR
- tipc: stop tipc crypto on failure in tipc_node_create
- eth: igc: fix kernel panic during ndo_tx_timeout callback
- eth: iavf: fix potential deadlock on allocation failure
Previous releases - always broken:
- ipv6: fix bug where deleting a mngtmpaddr can create a new
temporary address
- eth: ice: fix memory management in ice_ethtool_fdir.c
- eth: hns3: fix the imp capability bit cannot exceed 32 bits issue
- eth: vxlan: calculate correct header length for GPE
- eth: stmmac: apply redundant write work around on 4.xx too"
* tag 'net-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
tipc: stop tipc crypto on failure in tipc_node_create
af_unix: Terminate sun_path when bind()ing pathname socket.
tipc: check return value of pskb_trim()
benet: fix return value check in be_lancer_xmit_workarounds()
virtio-net: fix race between set queues and probe
net/sched: mqprio: Add length check for TCA_MQPRIO_{MAX/MIN}_RATE64
splice, net: Fix splice_to_socket() for O_NONBLOCK socket
net: fec: tx processing does not call XDP APIs if budget is 0
mptcp: more accurate NL event generation
selftests: mptcp: join: only check for ip6tables if needed
tools: ynl-gen: fix parse multi-attr enum attribute
tools: ynl-gen: fix enum index in _decode_enum(..)
netfilter: nf_tables: disallow rule addition to bound chain via NFTA_RULE_CHAIN_ID
netfilter: nf_tables: skip immediate deactivate in _PREPARE_ERROR
netfilter: nft_set_rbtree: fix overlap expiration walk
igc: Fix Kernel Panic during ndo_tx_timeout callback
net: dsa: qca8k: fix mdb add/del case with 0 VID
net: dsa: qca8k: fix broken search_and_del
net: dsa: qca8k: fix search_and_insert wrong handling of new rule
net: dsa: qca8k: enable use_single_write for qca8xxx
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fixes from Vinod Koul:
- Core fix for enumeration completion
- Qualcomm driver fix to update status
- AMD driver fix for probe error check
* tag 'soundwire-6.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: Fix a check for errors in probe()
soundwire: qcom: update status correctly with mask
soundwire: fix enumeration completion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- Out of bound fix for hisilicon phy
- Qualcomm synopsis femto phy for keeping clock enabled during suspend
and enabling ref clocks
- Mediatek driver fixes for upper limit test and error code
* tag 'phy-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: hisilicon: Fix an out of bounds check in hisi_inno_phy_probe()
phy: qcom-snps-femto-v2: use qcom_snps_hsphy_suspend/resume error code
phy: qcom-snps-femto-v2: properly enable ref clock
phy: qcom-snps-femto-v2: keep cfg_ahb_clk enabled during runtime suspend
phy: mediatek: hdmi: mt8195: fix prediv bad upper limit test
phy: phy-mtk-dp: Fix an error code in probe()
|
|
Prefer struct_size_t() over struct_size() when no pointer instance
of the structure type is present.
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Link: https://lore.kernel.org/r/ZKBfoqSl61jfpO2r@work
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Industrial processor i3255 supports temperatures -40 deg celcius
to 105 deg Celcius. The current implementation of k10temp_read_temp
rounds off any negative temperatures to '0'. To fix this,
the following changes have been made.
A flag 'disp_negative' is added to struct k10temp_data to support
AMD i3255 processors. Flag 'disp_negative' is set if 3255 processor
is found during k10temp_probe. Flag 'disp_negative' is used to
determine whether to round off negative temperatures to '0' in
k10temp_read_temp.
Signed-off-by: Baskaran Kannan <Baski.Kannan@amd.com>
Link: https://lore.kernel.org/r/20230727162159.1056136-1-Baski.Kannan@amd.com
Fixes: aef17ca12719 ("hwmon: (k10temp) Only apply temperature offset if result is positive")
Cc: stable@vger.kernel.org
[groeck: Fixed multi-line comment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
'op-cs' is copied in 'fun->mchip_number' which is used to access the
'mchip_offsets' and the 'rnb_gpio' arrays.
These arrays have NAND_MAX_CHIPS elements, so the index must be below this
limit.
Fix the sanity check in order to avoid the NAND_MAX_CHIPS value. This
would lead to out-of-bound accesses.
Fixes: 54309d657767 ("mtd: rawnand: fsl_upm: Implement exec_op()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/cd01cba1c7eda58bdabaae174c78c067325803d2.1689803636.git.christophe.jaillet@wanadoo.fr
|
|
gcc gets confused when -ftrivial-auto-var-init=pattern is used on sparse
bit fields such as 'struct spi_mem_op', which caused the previous false
positive warning about an uninitialized variable:
drivers/mtd/spi-nor/spansion.c: error: 'op' is used uninitialized [-Werror=uninitialized]
In fact, the variable is fully initialized and gcc does not see it being
used, so the warning is entirely bogus. The problem appears to be
a misoptimization in the initialization of single bit fields when the
rest of the bytes are not initialized.
A previous workaround added another initialization, which ended up
shutting up the warning in spansion.c, though it apparently still happens
in other files as reported by Peter Foley in the gcc bugzilla. The
workaround of adding a fake initialization seems particularly bad
because it would set values that can never be correct but prevent the
compiler from warning about actually missing initializations.
Revert the broken workaround and instead pad the structure to only
have bitfields that add up to full bytes, which should avoid this
behavior in all drivers.
I also filed a new bug against gcc with what I found, so this can
hopefully be addressed in future gcc releases. At the moment, only
gcc-12 and gcc-13 are affected.
Cc: Peter Foley <pefoley2@pefoley.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110743
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108402
Link: https://godbolt.org/z/efMMsG1Kx
Fixes: 420c4495b5e56 ("mtd: spi-nor: spansion: make sure local struct does not contain garbage")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230719190045.4007391-1-arnd@kernel.org
|
|
Even though the test suite covers this it somehow became obscured that
this wasn't working.
The test iommufd_ioas.mock_domain.access_domain_destory would blow up
rarely.
end should be set to 1 because this just pushed an item, the carry, to the
pfns list.
Sometimes the test would blow up with:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 5 PID: 584 Comm: iommufd Not tainted 6.5.0-rc1-dirty #1236
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:batch_unpin+0xa2/0x100 [iommufd]
Code: 17 48 81 fe ff ff 07 00 77 70 48 8b 15 b7 be 97 e2 48 85 d2 74 14 48 8b 14 fa 48 85 d2 74 0b 40 0f b6 f6 48 c1 e6 04 48 01 f2 <48> 8b 3a 48 c1 e0 06 89 ca 48 89 de 48 83 e7 f0 48 01 c7 e8 96 dc
RSP: 0018:ffffc90001677a58 EFLAGS: 00010246
RAX: 00007f7e2646f000 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 00000000fefc4c8d RDI: 0000000000fefc4c
RBP: ffffc90001677a80 R08: 0000000000000048 R09: 0000000000000200
R10: 0000000000030b98 R11: ffffffff81f3bb40 R12: 0000000000000001
R13: ffff888101f75800 R14: ffffc90001677ad0 R15: 00000000000001fe
FS: 00007f9323679740(0000) GS:ffff8881ba540000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000105ede003 CR4: 00000000003706a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? show_regs+0x5c/0x70
? __die+0x1f/0x60
? page_fault_oops+0x15d/0x440
? lock_release+0xbc/0x240
? exc_page_fault+0x4a4/0x970
? asm_exc_page_fault+0x27/0x30
? batch_unpin+0xa2/0x100 [iommufd]
? batch_unpin+0xba/0x100 [iommufd]
__iopt_area_unfill_domain+0x198/0x430 [iommufd]
? __mutex_lock+0x8c/0xb80
? __mutex_lock+0x6aa/0xb80
? xa_erase+0x28/0x30
? iopt_table_remove_domain+0x162/0x320 [iommufd]
? lock_release+0xbc/0x240
iopt_area_unfill_domain+0xd/0x10 [iommufd]
iopt_table_remove_domain+0x195/0x320 [iommufd]
iommufd_hw_pagetable_destroy+0xb3/0x110 [iommufd]
iommufd_object_destroy_user+0x8e/0xf0 [iommufd]
iommufd_device_detach+0xc5/0x140 [iommufd]
iommufd_selftest_destroy+0x1f/0x70 [iommufd]
iommufd_object_destroy_user+0x8e/0xf0 [iommufd]
iommufd_destroy+0x3a/0x50 [iommufd]
iommufd_fops_ioctl+0xfb/0x170 [iommufd]
__x64_sys_ioctl+0x40d/0x9a0
do_syscall_64+0x3c/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Link: https://lore.kernel.org/r/3-v1-85aacb2af554+bc-iommufd_syz3_jgg@nvidia.com
Cc: <stable@vger.kernel.org>
Fixes: f394576eb11d ("iommufd: PFN handling for iopt_pages")
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reported-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
syzkaller found a race where IOMMUFD_DESTROY increments the refcount:
obj = iommufd_get_object(ucmd->ictx, cmd->id, IOMMUFD_OBJ_ANY);
if (IS_ERR(obj))
return PTR_ERR(obj);
iommufd_ref_to_users(obj);
/* See iommufd_ref_to_users() */
if (!iommufd_object_destroy_user(ucmd->ictx, obj))
As part of the sequence to join the two existing primitives together.
Allowing the refcount the be elevated without holding the destroy_rwsem
violates the assumption that all temporary refcount elevations are
protected by destroy_rwsem. Racing IOMMUFD_DESTROY with
iommufd_object_destroy_user() will cause spurious failures:
WARNING: CPU: 0 PID: 3076 at drivers/iommu/iommufd/device.c:477 iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:478
Modules linked in:
CPU: 0 PID: 3076 Comm: syz-executor.0 Not tainted 6.3.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023
RIP: 0010:iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:477
Code: e8 3d 4e 00 00 84 c0 74 01 c3 0f 0b c3 0f 1f 44 00 00 f3 0f 1e fa 48 89 fe 48 8b bf a8 00 00 00 e8 1d 4e 00 00 84 c0 74 01 c3 <0f> 0b c3 0f 1f 44 00 00 41 57 41 56 41 55 4c 8d ae d0 00 00 00 41
RSP: 0018:ffffc90003067e08 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888109ea0300 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000ffffffff
RBP: 0000000000000004 R08: 0000000000000000 R09: ffff88810bbb3500
R10: ffff88810bbb3e48 R11: 0000000000000000 R12: ffffc90003067e88
R13: ffffc90003067ea8 R14: ffff888101249800 R15: 00000000fffffffe
FS: 00007ff7254fe6c0(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555557262da8 CR3: 000000010a6fd000 CR4: 0000000000350ef0
Call Trace:
<TASK>
iommufd_test_create_access drivers/iommu/iommufd/selftest.c:596 [inline]
iommufd_test+0x71c/0xcf0 drivers/iommu/iommufd/selftest.c:813
iommufd_fops_ioctl+0x10f/0x1b0 drivers/iommu/iommufd/main.c:337
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x84/0xc0 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The solution is to not increment the refcount on the IOMMUFD_DESTROY path
at all. Instead use the xa_lock to serialize everything. The refcount
check == 1 and xa_erase can be done under a single critical region. This
avoids the need for any refcount incrementing.
It has the downside that if userspace races destroy with other operations
it will get an EBUSY instead of waiting, but this is kind of racing is
already dangerous.
Fixes: 2ff4bed7fee7 ("iommufd: File descriptor, context, kconfig and makefiles")
Link: https://lore.kernel.org/r/2-v1-85aacb2af554+bc-iommufd_syz3_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reported-by: syzbot+7574ebfe589049630608@syzkaller.appspotmail.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/fixes
Memory controller drivers - fixes for v6.5
Two fixes are needed for Tegra194 memory controllers caused by the same
Tegra PCI commit merged in v6.5-rc1. The Tegra PCI requires now
interconnect from the memory controller, which was set only for
Tegra234, but not for Tegra194, causing probe deferrals. Expose some
dummy interconnect provider for Tegra194, to satisfy PCI driver needs.
* tag 'memory-controller-drv-fixes-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra: make icc_set_bw return zero if BWMGR not supported
memory: tegra: Add dummy implementation on Tegra194
Link: https://lore.kernel.org/r/20230726084811.124038-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.5:
- A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU
frequency of sk-imx53 board
- Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux
- A couple of imx8mm-venice fixes from Tim Harvey to diable disp_blk_ctrl
- A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct
VPU label and gpio-line-names
- Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as bus_power_dev
child, so that runtime PM can translate into the necessary GPC power
domain action
* tag 'imx-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child
ARM: dts: nxp/imx: limit sk-imx53 supported frequencies
arm64: dts: freescale: Fix VPU G2 clock
arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux
arm64: dts: phycore-imx8mm: Correction in gpio-line-names
arm64: dts: phycore-imx8mm: Label typo-fix of VPU
ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node
arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl
arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl
Link: https://lore.kernel.org/r/20230725075837.GR151430@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
If user interrupts wait_event_interruptible() in ublk_ctrl_del_dev(),
return -EINTR and let user know what happens.
Fixes: 0abe39dec065 ("block: ublk: improve handling device deletion")
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20230726144502.566785-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In ublk_ctrl_end_recovery(), if wait_for_completion_interruptible() is
interrupted by signal, queues aren't setup successfully yet, so we
have to fail UBLK_CMD_END_USER_RECOVERY, otherwise kernel oops can be
triggered.
Fixes: c732a852b419 ("ublk_drv: add START_USER_RECOVERY and END_USER_RECOVERY support")
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20230726144502.566785-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In ublk_ctrl_start_dev(), if wait_for_completion_interruptible() is
interrupted by signal, queues aren't setup successfully yet, so we
have to fail UBLK_CMD_START_DEV, otherwise kernel oops can be triggered.
Reported by German when working on qemu-storage-deamon which requires
single thread ublk daemon.
Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Reported-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230726144502.566785-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a mitigation for the speculative return address stack overflow
vulnerability found on AMD processors.
The mitigation works by ensuring all RET instructions speculate to
a controlled location, similar to how speculation is controlled in the
retpoline sequence. To accomplish this, the __x86_return_thunk forces
the CPU to mispredict every function return using a 'safe return'
sequence.
To ensure the safety of this mitigation, the kernel must ensure that the
safe return sequence is itself free from attacker interference. In Zen3
and Zen4, this is accomplished by creating a BTB alias between the
untraining function srso_untrain_ret_alias() and the safe return
function srso_safe_ret_alias() which results in evicting a potentially
poisoned BTB entry and using that safe one for all function returns.
In older Zen1 and Zen2, this is accomplished using a reinterpretation
technique similar to Retbleed one: srso_untrain_ret() and
srso_safe_ret().
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
A negative number from ret means the host controller had failed to send
usb message and 0 means succeed. Therefore, the if logic is wrong here
and this patch will fix it.
Fixes: f2b42379c576 ("usb: misc: ehset: Rework test mode entry")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20230705095231.457860-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Hardware based on the Bay Trail / BYT SoCs require an external ULPI phy for
USB device-mode. The phy chip usually has its 'reset' and 'chip select'
lines connected to GPIOs described by ACPI fwnodes in the DSDT table.
Because of hardware with missing ACPI resources for the 'reset' and 'chip
select' GPIOs commit 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table
on platforms without ACPI GPIO resources") introduced a fallback
gpiod_lookup_table with hard-coded mappings for Bay Trail devices.
However there are existing Bay Trail based devices, like the National
Instruments cRIO-903x series, where the phy chip has its 'reset' and
'chip-select' lines always asserted in hardware via resistor pull-ups. On
this hardware the phy chip is always enabled and the ACPI dsdt table is
missing information not only for the 'chip-select' and 'reset' lines but
also for the BYT GPIO controller itself "INT33FC".
With the introduction of the gpiod_lookup_table initializing the USB
device-mode on these hardware now errors out. The error comes from the
gpiod_get_optional() calls in dwc3_pci_quirks() which will now return an
-ENOENT error due to the missing ACPI entry for the INT33FC gpio controller
used in the aforementioned table.
This hardware used to work before because gpiod_get_optional() will return
NULL instead of -ENOENT if no GPIO has been assigned to the requested
function. The dwc3_pci_quirks() code for setting the 'cs' and 'reset' GPIOs
was then skipped (due to the NULL return). This is the correct behavior in
cases where the phy chip is hardwired and there are no GPIOs to control.
Since the gpiod_lookup_table relies on the presence of INT33FC fwnode
in ACPI tables only add the table if we know the entry for the INT33FC
gpio controller is present. This allows Bay Trail based devices with
hardwired dwc3 ULPI phys to continue working.
Fixes: 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources")
Cc: stable <stable@kernel.org>
Signed-off-by: Gratian Crisan <gratian.crisan@ni.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230726184555.218091-2-gratian.crisan@ni.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
in be_lancer_xmit_workarounds(), it should go to label 'tx_drop'
if an unexpected value is returned by pskb_trim().
Fixes: 93040ae5cc8d ("be2net: Fix to trim skb for padded vlan packets to workaround an ASIC Bug")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://lore.kernel.org/r/20230725032726.15002-1-ruc_gongyuanjun@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The "exc->key_len" is a u16 that comes from the user. If it's over
IW_ENCODING_TOKEN_MAX (64) that could lead to memory corruption.
Fixes: b121d84882b9 ("staging: ks7010: simplify calls to memcpy()")
Cc: stable <stable@kernel.org>
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/tencent_5153B668C0283CAA15AA518325346E026A09@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Using FBTFT_REGISTER_DRIVER resolves to a NULL struct spi_device_id. This
ultimately causes a warning when the module probes. Fixes it.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Link: https://lore.kernel.org/r/20230718172024.67488-1-rgallaispou@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a check to avoid null pointer dereference as below:
[ 90.002283] general protection fault, probably for non-canonical
address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 90.002292] KASAN: null-ptr-deref in range
[0x0000000000000000-0x0000000000000007]
[ 90.002346] ? exc_general_protection+0x159/0x240
[ 90.002352] ? asm_exc_general_protection+0x26/0x30
[ 90.002357] ? ttm_bo_evict_swapout_allowable+0x322/0x5e0 [ttm]
[ 90.002365] ? ttm_bo_evict_swapout_allowable+0x42e/0x5e0 [ttm]
[ 90.002373] ttm_bo_swapout+0x134/0x7f0 [ttm]
[ 90.002383] ? __pfx_ttm_bo_swapout+0x10/0x10 [ttm]
[ 90.002391] ? lock_acquire+0x44d/0x4f0
[ 90.002398] ? ttm_device_swapout+0xa5/0x260 [ttm]
[ 90.002412] ? lock_acquired+0x355/0xa00
[ 90.002416] ? do_raw_spin_trylock+0xb6/0x190
[ 90.002421] ? __pfx_lock_acquired+0x10/0x10
[ 90.002426] ? ttm_global_swapout+0x25/0x210 [ttm]
[ 90.002442] ttm_device_swapout+0x198/0x260 [ttm]
[ 90.002456] ? __pfx_ttm_device_swapout+0x10/0x10 [ttm]
[ 90.002472] ttm_global_swapout+0x75/0x210 [ttm]
[ 90.002486] ttm_tt_populate+0x187/0x3f0 [ttm]
[ 90.002501] ttm_bo_handle_move_mem+0x437/0x590 [ttm]
[ 90.002517] ttm_bo_validate+0x275/0x430 [ttm]
[ 90.002530] ? __pfx_ttm_bo_validate+0x10/0x10 [ttm]
[ 90.002544] ? kasan_save_stack+0x33/0x60
[ 90.002550] ? kasan_set_track+0x25/0x30
[ 90.002554] ? __kasan_kmalloc+0x8f/0xa0
[ 90.002558] ? amdgpu_gtt_mgr_new+0x81/0x420 [amdgpu]
[ 90.003023] ? ttm_resource_alloc+0xf6/0x220 [ttm]
[ 90.003038] amdgpu_bo_pin_restricted+0x2dd/0x8b0 [amdgpu]
[ 90.003210] ? __x64_sys_ioctl+0x131/0x1a0
[ 90.003210] ? do_syscall_64+0x60/0x90
Fixes: a2848d08742c ("drm/ttm: never consider pinned BOs for eviction&swap")
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20230724024229.1118444-1-guchun.chen@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
In the above mentioned routine, memory is allocated in several places.
If the first succeeds and a later one fails, the routine will leak memory.
This patch fixes commit 2865d42c78a9 ("staging: r8712u: Add the new driver
to the mainline kernel"). A potential memory leak in
r8712_xmit_resource_alloc() is also addressed.
Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Reported-by: syzbot+cf71097ffb6755df8251@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/x/log.txt?x=11ac3fa0a80000
Cc: stable@vger.kernel.org
Cc: Nam Cao <namcaov@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reviewed-by: Nam Cao <namcaov@gmail.com>
Link: https://lore.kernel.org/r/20230714175417.18578-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When a grant entry is still in use by the remote domain, Linux must put
it on a deferred list. Normally, this list is very short, because
the PV network and block protocols expect the backend to unmap the grant
first. However, Qubes OS's GUI protocol is subject to the constraints
of the X Window System, and as such winds up with the frontend unmapping
the window first. As a result, the list can grow very large, resulting
in a massive memory leak and eventual VM freeze.
To partially solve this problem, make the number of entries that the VM
will attempt to free at each iteration tunable. The default is still
10, but it can be overridden via a module parameter.
This is Cc: stable because (when combined with appropriate userspace
changes) it fixes a severe performance and stability problem for Qubes
OS users.
Cc: stable@vger.kernel.org
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230726165354.1252-1-demi@invisiblethingslab.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
A race were found where set_channels could be called after registering
but before virtnet_set_queues() in virtnet_probe(). Fixing this by
moving the virtnet_set_queues() before netdevice registering. While at
it, use _virtnet_set_queues() to avoid holding rtnl as the device is
not even registered at that time.
Cc: stable@vger.kernel.org
Fixes: a220871be66f ("virtio-net: correctly enable multiqueue")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230725072049.617289-1-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the clarification [1] in the latest napi.rst, the tx
processing cannot call any XDP (or page pool) APIs if the "budget"
is 0. Because NAPI is called with the budget of 0 (such as netpoll)
indicates we may be in an IRQ context, however, we cannot use the
page pool from IRQ context.
[1] https://lore.kernel.org/all/20230720161323.2025379-1-kuba@kernel.org/
Fixes: 20f797399035 ("net: fec: recycle pages for transmitted XDP frames")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230725074148.2936402-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pmbus_regulator_get_status() acquires update_lock.
pmbus_regulator_get_error_flags() acquires it again, resulting in an
immediate deadlock.
Call _pmbus_get_flags() from pmbus_regulator_get_status() directly
to avoid the problem.
Reported-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Closes: https://lore.kernel.org/linux-hwmon/b7a3ad85-aab4-4718-a001-1d8b1c0eef36@roeck-us.net/T/#u
Cc: Naresh Solanki <Naresh.Solanki@9elements.com>
Cc: stable@vger.kernel.org # v6.2+
Fixes: c05f477c4ba3 ("hwmon: (pmbus/core) Implement regulator get_status")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Currently, in case an interface is down, mlx5 driver doesn't
unregister its devlink params, which leads to this WARN[1].
Fix it by unregistering devlink params in that case as well.
[1]
[ 295.244769 ] WARNING: CPU: 15 PID: 1 at net/core/devlink.c:9042 devlink_free+0x174/0x1fc
[ 295.488379 ] CPU: 15 PID: 1 Comm: shutdown Tainted: G S OE 5.15.0-1017.19.3.g0677e61-bluefield #g0677e61
[ 295.509330 ] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS 4.2.0.12761 Jun 6 2023
[ 295.543096 ] pc : devlink_free+0x174/0x1fc
[ 295.551104 ] lr : mlx5_devlink_free+0x18/0x2c [mlx5_core]
[ 295.561816 ] sp : ffff80000809b850
[ 295.711155 ] Call trace:
[ 295.716030 ] devlink_free+0x174/0x1fc
[ 295.723346 ] mlx5_devlink_free+0x18/0x2c [mlx5_core]
[ 295.733351 ] mlx5_sf_dev_remove+0x98/0xb0 [mlx5_core]
[ 295.743534 ] auxiliary_bus_remove+0x2c/0x50
[ 295.751893 ] __device_release_driver+0x19c/0x280
[ 295.761120 ] device_release_driver+0x34/0x50
[ 295.769649 ] bus_remove_device+0xdc/0x170
[ 295.777656 ] device_del+0x17c/0x3a4
[ 295.784620 ] mlx5_sf_dev_remove+0x28/0xf0 [mlx5_core]
[ 295.794800 ] mlx5_sf_dev_table_destroy+0x98/0x110 [mlx5_core]
[ 295.806375 ] mlx5_unload+0x34/0xd0 [mlx5_core]
[ 295.815339 ] mlx5_unload_one+0x70/0xe4 [mlx5_core]
[ 295.824998 ] shutdown+0xb0/0xd8 [mlx5_core]
[ 295.833439 ] pci_device_shutdown+0x3c/0xa0
[ 295.841651 ] device_shutdown+0x170/0x340
[ 295.849486 ] __do_sys_reboot+0x1f4/0x2a0
[ 295.857322 ] __arm64_sys_reboot+0x2c/0x40
[ 295.865329 ] invoke_syscall+0x78/0x100
[ 295.872817 ] el0_svc_common.constprop.0+0x54/0x184
[ 295.882392 ] do_el0_svc+0x30/0xac
[ 295.889008 ] el0_svc+0x48/0x160
[ 295.895278 ] el0t_64_sync_handler+0xa4/0x130
[ 295.903807 ] el0t_64_sync+0x1a4/0x1a8
[ 295.911120 ] ---[ end trace 4f1d2381d00d9dce ]---
Fixes: fe578cbb2f05 ("net/mlx5: Move devlink registration before mlx5_load")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The offending patch is based on the assumption that for PFs,
mlx5_get_dev_index() is the same as vhca_id. However, this assumption
is wrong in case of DPU (ECPF).
Fix it by using vhca_id directly, and switch the array of peers to
xarray.
Fixes: 6d5b7321d8af ("net/mlx5: DR, handle more than one peer domain")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited commit sets ft prio to fs_base_prio. But if
ignore_flow_level it not supported, ft prio must be set based on
tc filter prio. Otherwise, all the ft prio are the same on the same
chain. It is invalid if ignore_flow_level is not supported.
Fix it by setting ft prio based on tc filter prio and setting
fs_base_prio to 0 for fdb.
Fixes: 8e80e5648092 ("net/mlx5: fs_chains: Refactor to detach chains from tc usage")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
There are DEK objects cached in DEK pool after kTLS is used, and they
are freed only in mlx5e_ktls_cleanup().
mlx5e_destroy_mdev_resources() is called in mlx5e_suspend() to
free mdev resources, including protection domain (PD). However, PD is
still referenced by the cached DEK objects in this case, because
profile->cleanup() (and therefore mlx5e_ktls_cleanup()) is called
after mlx5e_suspend() during devlink reload. So the following FW
syndrome is generated:
mlx5_cmd_out_err:803:(pid 12948): DEALLOC_PD(0x801) op_mod(0x0) failed,
status bad resource state(0x9), syndrome (0xef0c8a), err(-22)
To avoid this syndrome, move DEK pool destruction to
mlx5e_ktls_cleanup_tx(), which is called by profile->cleanup_tx(). And
move pool creation to mlx5e_ktls_init_tx() for symmetry.
Fixes: f741db1a5171 ("net/mlx5e: kTLS, Improve connection rate by using fast update encryption key")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
As suggested during code review set the access rights for bridge 'fdb'
debugfs file to root-only.
Fixes: 791eb78285e8 ("net/mlx5: Bridge, expose FDB state via debugfs")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/netdev/20230619120515.5045132a@kernel.org/
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When the regular rq is reactivated after the XSK socket is closed
it could be reading stale cqes which eventually corrupts the rq.
This leads to no more traffic being received on the regular rq and a
crash on the next close or deactivation of the rq.
Kal Cuttler Conely reported this issue as a crash on the release
path when the xdpsock sample program is stopped (killed) and restarted
in sequence while traffic is running.
This patch flushes all cqes when during the rq flush. The cqe flushing
is done in the reset state of the rq. mlx5e_rq_to_ready code is moved
into the flush function to allow for this.
Fixes: 082a9edf12fe ("net/mlx5e: xsk: Flush RQ on XSK activation to save memory")
Reported-by: Kal Cutter Conley <kal.conley@dectris.com>
Closes: https://lore.kernel.org/xdp-newbies/CAHApi-nUAs4TeFWUDV915CZJo07XVg2Vp63-no7UDfj6wur9nQ@mail.gmail.com
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The below crash can be encountered when using xdpsock in rx mode for
legacy rq: the buffer gets released in the XDP_REDIRECT path, and then
once again in the driver. This fix sets the flag to avoid releasing on
the driver side.
XSK handling of buffers for legacy rq was relying on the caller to set
the skip release flag. But the referenced fix started using fragment
counts for pages instead of the skip flag.
Crash log:
general protection fault, probably for non-canonical address 0xffff8881217e3a: 0000 [#1] SMP
CPU: 0 PID: 14 Comm: ksoftirqd/0 Not tainted 6.5.0-rc1+ #31
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:bpf_prog_03b13f331978c78c+0xf/0x28
Code: ...
RSP: 0018:ffff88810082fc98 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888138404901 RCX: c0ffffc900027cbc
RDX: ffffffffa000b514 RSI: 00ffff8881217e32 RDI: ffff888138404901
RBP: ffff88810082fc98 R08: 0000000000091100 R09: 0000000000000006
R10: 0000000000000800 R11: 0000000000000800 R12: ffffc9000027a000
R13: ffff8881217e2dc0 R14: ffff8881217e2910 R15: ffff8881217e2f00
FS: 0000000000000000(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000564cb2e2cde0 CR3: 000000010e603004 CR4: 0000000000370eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? die_addr+0x32/0x80
? exc_general_protection+0x192/0x390
? asm_exc_general_protection+0x22/0x30
? 0xffffffffa000b514
? bpf_prog_03b13f331978c78c+0xf/0x28
mlx5e_xdp_handle+0x48/0x670 [mlx5_core]
? dev_gro_receive+0x3b5/0x6e0
mlx5e_xsk_skb_from_cqe_linear+0x6e/0x90 [mlx5_core]
mlx5e_handle_rx_cqe+0x55/0x100 [mlx5_core]
mlx5e_poll_rx_cq+0x87/0x6e0 [mlx5_core]
mlx5e_napi_poll+0x45e/0x6b0 [mlx5_core]
__napi_poll+0x25/0x1a0
net_rx_action+0x28a/0x300
__do_softirq+0xcd/0x279
? sort_range+0x20/0x20
run_ksoftirqd+0x1a/0x20
smpboot_thread_fn+0xa2/0x130
kthread+0xc9/0xf0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Modules linked in: mlx5_ib mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay zram zsmalloc fuse [last unloaded: mlx5_core]
---[ end trace 0000000000000000 ]---
Fixes: 7abd955a58fb ("net/mlx5e: RX, Fix page_pool page fragment tracking for XDP")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
For IP tunnel encapsulation in ECMP (Equal-Cost Multipath) mode, as
the flow is duplicated to the peer eswitch, the related neighbour
information on the peer uplink representor is created as well.
In the cited commit, eswitch devcom unpair is moved to uplink unload
API, specifically the profile->cleanup_tx. If there is a encap rule
offloaded in ECMP mode, when one eswitch does unpair (because of
unloading the driver, for instance), and the peer rule from the peer
eswitch is going to be deleted, the use-after-free error is triggered
while accessing neigh info, as it is already cleaned up in uplink's
profile->disable, which is before its profile->cleanup_tx.
To fix this issue, move the neigh cleanup to profile's cleanup_tx
callback, and after mlx5e_cleanup_uplink_rep_tx is called. The neigh
init is moved to init_tx for symmeter.
[ 2453.376299] BUG: KASAN: slab-use-after-free in mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.379125] Read of size 4 at addr ffff888127af9008 by task modprobe/2496
[ 2453.381542] CPU: 7 PID: 2496 Comm: modprobe Tainted: G B 6.4.0-rc7+ #15
[ 2453.383386] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 2453.384335] Call Trace:
[ 2453.384625] <TASK>
[ 2453.384891] dump_stack_lvl+0x33/0x50
[ 2453.385285] print_report+0xc2/0x610
[ 2453.385667] ? __virt_addr_valid+0xb1/0x130
[ 2453.386091] ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.386757] kasan_report+0xae/0xe0
[ 2453.387123] ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.387798] mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.388465] mlx5e_rep_encap_entry_detach+0xa6/0xe0 [mlx5_core]
[ 2453.389111] mlx5e_encap_dealloc+0xa7/0x100 [mlx5_core]
[ 2453.389706] mlx5e_tc_tun_encap_dests_unset+0x61/0xb0 [mlx5_core]
[ 2453.390361] mlx5_free_flow_attr_actions+0x11e/0x340 [mlx5_core]
[ 2453.391015] ? complete_all+0x43/0xd0
[ 2453.391398] ? free_flow_post_acts+0x38/0x120 [mlx5_core]
[ 2453.392004] mlx5e_tc_del_fdb_flow+0x4ae/0x690 [mlx5_core]
[ 2453.392618] mlx5e_tc_del_fdb_peers_flow+0x308/0x370 [mlx5_core]
[ 2453.393276] mlx5e_tc_clean_fdb_peer_flows+0xf5/0x140 [mlx5_core]
[ 2453.393925] mlx5_esw_offloads_unpair+0x86/0x540 [mlx5_core]
[ 2453.394546] ? mlx5_esw_offloads_set_ns_peer.isra.0+0x180/0x180 [mlx5_core]
[ 2453.395268] ? down_write+0xaa/0x100
[ 2453.395652] mlx5_esw_offloads_devcom_event+0x203/0x530 [mlx5_core]
[ 2453.396317] mlx5_devcom_send_event+0xbb/0x190 [mlx5_core]
[ 2453.396917] mlx5_esw_offloads_devcom_cleanup+0xb0/0xd0 [mlx5_core]
[ 2453.397582] mlx5e_tc_esw_cleanup+0x42/0x120 [mlx5_core]
[ 2453.398182] mlx5e_rep_tc_cleanup+0x15/0x30 [mlx5_core]
[ 2453.398768] mlx5e_cleanup_rep_tx+0x6c/0x80 [mlx5_core]
[ 2453.399367] mlx5e_detach_netdev+0xee/0x120 [mlx5_core]
[ 2453.399957] mlx5e_netdev_change_profile+0x84/0x170 [mlx5_core]
[ 2453.400598] mlx5e_vport_rep_unload+0xe0/0xf0 [mlx5_core]
[ 2453.403781] mlx5_eswitch_unregister_vport_reps+0x15e/0x190 [mlx5_core]
[ 2453.404479] ? mlx5_eswitch_register_vport_reps+0x200/0x200 [mlx5_core]
[ 2453.405170] ? up_write+0x39/0x60
[ 2453.405529] ? kernfs_remove_by_name_ns+0xb7/0xe0
[ 2453.405985] auxiliary_bus_remove+0x2e/0x40
[ 2453.406405] device_release_driver_internal+0x243/0x2d0
[ 2453.406900] ? kobject_put+0x42/0x2d0
[ 2453.407284] bus_remove_device+0x128/0x1d0
[ 2453.407687] device_del+0x240/0x550
[ 2453.408053] ? waiting_for_supplier_show+0xe0/0xe0
[ 2453.408511] ? kobject_put+0xfa/0x2d0
[ 2453.408889] ? __kmem_cache_free+0x14d/0x280
[ 2453.409310] mlx5_rescan_drivers_locked.part.0+0xcd/0x2b0 [mlx5_core]
[ 2453.409973] mlx5_unregister_device+0x40/0x50 [mlx5_core]
[ 2453.410561] mlx5_uninit_one+0x3d/0x110 [mlx5_core]
[ 2453.411111] remove_one+0x89/0x130 [mlx5_core]
[ 2453.411628] pci_device_remove+0x59/0xf0
[ 2453.412026] device_release_driver_internal+0x243/0x2d0
[ 2453.412511] ? parse_option_str+0x14/0x90
[ 2453.412915] driver_detach+0x7b/0xf0
[ 2453.413289] bus_remove_driver+0xb5/0x160
[ 2453.413685] pci_unregister_driver+0x3f/0xf0
[ 2453.414104] mlx5_cleanup+0xc/0x20 [mlx5_core]
Fixes: 2be5bd42a5bb ("net/mlx5: Handle pairing of E-switch via uplink un/load APIs")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Moving to switchdev mode with ntuple offload on causes the kernel to
crash since fs->arfs is freed during nic profile cleanup flow.
Ntuple offload is not supported in switchdev mode and it is already
unset by mlx5 fix feature ndo in switchdev mode. Verify fs->arfs is
valid before disabling it.
trace:
[] RIP: 0010:_raw_spin_lock_bh+0x17/0x30
[] arfs_del_rules+0x44/0x1a0 [mlx5_core]
[] mlx5e_arfs_disable+0xe/0x20 [mlx5_core]
[] mlx5e_handle_feature+0x3d/0xb0 [mlx5_core]
[] ? __rtnl_unlock+0x25/0x50
[] mlx5e_set_features+0xfe/0x160 [mlx5_core]
[] __netdev_update_features+0x278/0xa50
[] ? netdev_run_todo+0x5e/0x2a0
[] netdev_update_features+0x22/0x70
[] ? _cond_resched+0x15/0x30
[] mlx5e_attach_netdev+0x12a/0x1e0 [mlx5_core]
[] mlx5e_netdev_attach_profile+0xa1/0xc0 [mlx5_core]
[] mlx5e_netdev_change_profile+0x77/0xe0 [mlx5_core]
[] mlx5e_vport_rep_load+0x1ed/0x290 [mlx5_core]
[] mlx5_esw_offloads_rep_load+0x88/0xd0 [mlx5_core]
[] esw_offloads_load_rep.part.38+0x31/0x50 [mlx5_core]
[] esw_offloads_enable+0x6c5/0x710 [mlx5_core]
[] mlx5_eswitch_enable_locked+0x1bb/0x290 [mlx5_core]
[] mlx5_devlink_eswitch_mode_set+0x14f/0x320 [mlx5_core]
[] devlink_nl_cmd_eswitch_set_doit+0x94/0x120
[] genl_family_rcv_msg_doit.isra.17+0x113/0x150
[] genl_family_rcv_msg+0xb7/0x170
[] ? devlink_nl_cmd_port_split_doit+0x100/0x100
[] genl_rcv_msg+0x47/0xa0
[] ? genl_family_rcv_msg+0x170/0x170
[] netlink_rcv_skb+0x4c/0x130
[] genl_rcv+0x24/0x40
[] netlink_unicast+0x19a/0x230
[] netlink_sendmsg+0x204/0x3d0
[] sock_sendmsg+0x50/0x60
Fixes: 90b22b9bcd24 ("net/mlx5e: Disable Rx ntuple offload for uplink representor")
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited commit holds encap tbl lock unconditionally when setting
up dests. But it may cause the following deadlock:
PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8"
#0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91
#1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb
#2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528
#3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb
#4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb
#5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core]
#6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core]
#7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core]
#8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core]
#9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core]
#10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core]
#11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core]
#12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core]
#13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8
#14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower]
#15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower]
#16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0
[1031218.028143] wait_for_completion+0x24/0x30
[1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core]
[1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core]
[1031218.029885] process_one_work+0x24e/0x510
Actually no need to hold encap tbl lock if there is no encap action.
Fix it by checking if encap action exists or not before holding
encap tbl lock.
Fixes: 37c3b9fa7ccf ("net/mlx5e: Prevent encap offload when neigh update is running")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, whenever a user is setting migratable port fn attr, the
driver is always turn migratable capability on.
Fix it by honor the user input
Fixes: e5b9642a33be ("net/mlx5: E-Switch, Implement devlink port function cmds to control migratable")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
mlx5e_ipsec_remove_trailer() should return an error code if function
pskb_trim() returns an unexpected value.
Fixes: 2ac9cfe78223 ("net/mlx5e: IPSec, Add Innova IPSec offload TX data path")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The memory pointed to by the priv->rx_res pointer is not freed in the error
path of mlx5e_init_rep_rx, which can lead to a memory leak. Fix by freeing
the memory in the error path, thereby making the error path identical to
mlx5e_cleanup_rep_rx().
Fixes: af8bbf730068 ("net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
when mlx5_cmd_exec failed in mlx5dr_cmd_create_reformat_ctx, the memory
pointed by 'in' is not released, which will cause memory leak. Move memory
release after mlx5_cmd_exec.
Fixes: 1d9186476e12 ("net/mlx5: DR, Add direct rule command utilities")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In function macsec_fs_tx_create_crypto_table_groups(), when the ft->g
memory is successfully allocated but the 'in' memory fails to be
allocated, the memory pointed to by ft->g is released once. And in function
macsec_fs_tx_create(), macsec_fs_tx_destroy() is called to release the
memory pointed to by ft->g again. This will cause double free problem.
Fixes: e467b283ffd5 ("net/mlx5e: Add MACsec TX steering rules")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
into clk-fixes
Pull an Amlogic clk driver fix from Jerome Brunet:
- Fix PLL scheduling while atomic following a1 locking sequence update
* tag 'clk-meson-fixes-v6.5-1' of https://github.com/BayLibre/clk-meson:
clk: meson: change usleep_range() to udelay() for atomic context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Misc small fixes and hw-id additions"
* tag 'platform-drivers-x86-v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: huawei-wmi: Silence ambient light sensor
platform/x86: msi-laptop: Fix rfkill out-of-sync on MSI Wind U100
platform/x86: asus-wmi: Fix setting RGB mode on some TUF laptops
platform/x86: think-lmi: Use kfree_sensitive instead of kfree
platform/x86/intel/hid: Add HP Dragonfly G2 to VGBS DMI quirks
platform/x86: intel: hid: Always call BTNL ACPI method
platform/x86/amd/pmf: Notify OS power slider update
platform/x86/amd/pmf: reduce verbosity of apmf_get_system_params
platform/x86: serial-multi-instantiate: Auto detect IRQ resource for CSC3551
platform/x86/amd: pmc: Use release_mem_region() to undo request_mem_region_muxed()
platform/x86: touchscreen_dmi.c: small changes for Archos 101 Cesium Educ tablet
|
|
A fence id of zero is expected to be invalid, and is not removed from
the fence_idr table. If userspace is requesting to specify the fence
id with the FENCE_SN_IN flag, we need to reject a zero fence id value.
Fixes: 17154addc5c1 ("drm/msm: Add MSM_SUBMIT_FENCE_SN_IN")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/549180/
|
