summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-04-23Bluetooth: btnxpuart: Fix sparse warningsLuiz Augusto von Dentz
This fixes the following sparse warnings: drivers/bluetooth/btnxpuart.c:681:23: sparse: sparse: restricted __le16 degrades to integer drivers/bluetooth/btnxpuart.c:690:82: sparse: sparse: incorrect type in argument 2 (different base types) @@ expected unsigned short [usertype] req_len @@ got restricted __le16 [usertype] len @@ drivers/bluetooth/btnxpuart.c:690:82: sparse: expected unsigned short [usertype] req_len drivers/bluetooth/btnxpuart.c:690:82: sparse: got restricted __le16 [usertype] len drivers/bluetooth/btnxpuart.c:694:84: sparse: sparse: incorrect type in argument 2 (different base types) @@ expected unsigned short [usertype] req_len @@ got restricted __le16 [usertype] len @@ drivers/bluetooth/btnxpuart.c:694:84: sparse: expected unsigned short [usertype] req_len drivers/bluetooth/btnxpuart.c:694:84: sparse: got restricted __le16 [usertype] len drivers/bluetooth/btnxpuart.c:708:23: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned int [usertype] requested_len @@ got restricted __le16 [usertype] len @@ drivers/bluetooth/btnxpuart.c:708:23: sparse: expected unsigned int [usertype] requested_len drivers/bluetooth/btnxpuart.c:708:23: sparse: got restricted __le16 [usertype] len drivers/bluetooth/btnxpuart.c:787:78: sparse: sparse: incorrect type in argument 2 (different base types) @@ expected unsigned short [usertype] chipid @@ got restricted __le16 [usertype] chip_id @@ drivers/bluetooth/btnxpuart.c:787:78: sparse: expected unsigned short [usertype] chipid drivers/bluetooth/btnxpuart.c:787:78: sparse: got restricted __le16 [usertype] chip_id drivers/bluetooth/btnxpuart.c:810:74: sparse: sparse: incorrect type in argument 2 (different base types) @@ expected unsigned short [usertype] req_len @@ got restricted __le16 [usertype] len @@ drivers/bluetooth/btnxpuart.c:810:74: sparse: expected unsigned short [usertype] req_len drivers/bluetooth/btnxpuart.c:810:74: sparse: got restricted __le16 [usertype] len drivers/bluetooth/btnxpuart.c:815:76: sparse: sparse: incorrect type in argument 2 (different base types) @@ expected unsigned short [usertype] req_len @@ got restricted __le16 [usertype] len @@ drivers/bluetooth/btnxpuart.c:815:76: sparse: expected unsigned short [usertype] req_len drivers/bluetooth/btnxpuart.c:815:76: sparse: got restricted __le16 [usertype] len drivers/bluetooth/btnxpuart.c:834:16: sparse: sparse: restricted __le32 degrades to integer drivers/bluetooth/btnxpuart.c:843:55: sparse: sparse: restricted __le32 degrades to integer drivers/bluetooth/btnxpuart.c:844:36: sparse: sparse: incorrect type in argument 3 (different base types) @@ expected unsigned long [usertype] @@ got restricted __le16 [usertype] len @@ drivers/bluetooth/btnxpuart.c:844:36: sparse: expected unsigned long [usertype] drivers/bluetooth/btnxpuart.c:844:36: sparse: got restricted __le16 [usertype] len Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202304160736.Tsa0zTBU-lkp@intel.com/ Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btrtl: Firmware format v2 supportMax Chou
Realtek changed the format of the firmware file as v2. The driver should implement the patch to extract the firmware data from the firmware file. The future chips must apply this patch for firmware loading. This patch is compatible with the both previous format and v2 as well. Signed-off-by: Allen Chen <allen_chen@realsil.com.cn> Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Tested-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Revert "Bluetooth: btsdio: fix use after free bug in btsdio_remove due to ↵Liu Jian
unfinished work" This reverts commit 1e9ac114c4428fdb7ff4635b45d4f46017e8916f. This patch introduces a possible null-ptr-def problem. Revert it. And the fixed bug by this patch have resolved by commit 73f7b171b7c0 ("Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition"). Fixes: 1e9ac114c442 ("Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work") Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: Add new quirk for broken set random RPA timeout for ATS2851Raul Cheleguini
The ATS2851 based controller advertises support for command "LE Set Random Private Address Timeout" but does not actually implement it, impeding the controller initialization. Add the quirk HCI_QUIRK_BROKEN_SET_RPA_TIMEOUT to unblock the controller initialization. < HCI Command: LE Set Resolvable Private... (0x08|0x002e) plen 2 Timeout: 900 seconds > HCI Event: Command Status (0x0f) plen 4 LE Set Resolvable Private Address Timeout (0x08|0x002e) ncmd 1 Status: Unknown HCI Command (0x01) Co-developed-by: imoc <wzj9912@gmail.com> Signed-off-by: imoc <wzj9912@gmail.com> Signed-off-by: Raul Cheleguini <raul.cheleguini@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: vhci: Fix info leak in force_devcd_write()Dan Carpenter
There are a number of bugs here: 1) If "count" is less than sizeof(dump_data.data) then it copies uninitialized data. 2) If simple_write_to_buffer() returns -EFAULT then we run into a problem "ret < count" comparison. "count" is an unsigned long so the comparison is type promoted to unsigned long and the negative returns become high positive values. That also results in copying uninitialized data. 3) If "*ppos" is non-zero then the first part of the dump_data buffer is uninitialized. Using copy_from_user() instead of simple_write_to_buffer() is more appropriate here. Fixes: d5d5df6da0aa ("Bluetooth: Add vhci devcoredump support") Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_qca: mark OF related data as maybe unusedSteev Klimaszewski
The driver can be compile tested with !CONFIG_OF making certain data unused. Signed-off-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btnxpuart: No need to check the received bootloader signatureNeeraj Sanjay Kale
We can never assume the uart will deliver a complete packet to the BT layer at once, the expected packet may be divided into several parts by uart as uart doesn't know the received packet size, the received data count may mismatch with the expected packet size, so here is_valid_bootloader_signature() check may always return false. Even we remove the count check in is_valid_bootloader_signature(), then the first part of the data which includes the packet type can pass the is_valid_bootloader_signature() check, but the remaining parts don't have the packet type data still cannot pass the check, here return directly will cause the data loss. So need to remove the received bootloader signature check here, the h4_recv_buf() can help us combine the different data received into one packet. If any out-of-sync or incomplete bootloader signature is received, it is safe to ignore and discard it, and process the next bootloader signature. Co-developed-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btnxpuart: Disable Power Save feature on startupNeeraj Sanjay Kale
This sets the default power save mode setting to disabled. With this setting, this driver will behave like a normal h4 driver. If user needs to use the power save feature, it can be enabled using the following vendor command: hcitool cmd 3f 23 02 00 00 (HCI_NXP_AUTO_SLEEP_MODE) Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btnxpuart: Deasset UART break before closing serdev deviceNeeraj Sanjay Kale
This adds a call to ps_wakeup() before closing the serdev device, to de-assert UART break. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btnxpuart: Add support to download helper FW file for w8997Neeraj Sanjay Kale
This adds support to download helper FW file for the legacy NXP chipset 88w8997 for the btnxpuart driver. This helper FW file is necessary to set the bootloader baudrate to 3000000 after which the actual BT FW file can be downloaded. This change helps bring the FW download time from around 10 sec to less than 2 sec for 88w8997 chip. For newer chipsets, both V1 and V3 bootloader, driver sends the cmd5 and cmd7 to the chip bootloader, and does not need a helper FW file. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_bcm: Add Acer Iconia One 7 B1-750 to the bcm_broken_irq_dmi_tableHans de Goede
The DSDT for the Acer Iconia One 7 B1-750 models (which share the same mainboard) specifies a IOAPIC IRQ for the HCI -> host IRQ but this is not correct. Like the Asus TF103C these tablets use pin 17 of the INT33FC:02 GPIO controller for the IRQ and this pin is _not_ configured in direct IRQ mode by the firmware. Add a DMI match for this, re-using the Asus TF103C gpiod_lookup_table, to fix bluetooth not working on these tablets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_bcm: Add Lenovo Yoga Tablet 2 830 / 1050 to the ↵Hans de Goede
bcm_broken_irq_dmi_table The DSDT for the Lenovo Yoga Tablet 2 830 / 1050 models (which share the same mainboard) specifies a IOAPIC IRQ for the HCI -> host IRQ but this is not correct. Like the Asus TF103C these tablets use pin 17 of the INT33FC:02 GPIO controller for the IRQ and this pin is _not_ configured in direct IRQ mode by the firmware. Add a DMI match for this, re-using the Asus TF103C gpiod_lookup_table, to fix bluetooth not working on these tablets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_bcm: Limit bcm43430a0 / bcm43430a1 baudrate to 2000000Hans de Goede
The bcm43430a0 and bcm43430a1 BT does not support the 0xfc45 command to set the UART clock to 48 MHz and it also does not work at 4000000 baud without this command as some newer models do. These chips are found on ACPI/x86 devices where the operating baudrate does not come from the firmware but is hardcoded at 4000000, which does not work. Add a max_baudrate value to struct bcm_device_data and set this to 2000000 on all known ACPI hardware-ids for the bcm43430a0 and the bcm43430a1. Note this also adds the BCM2E9F ACPI HID which was missing until now. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_bcm: Fall back to getting bdaddr from EFI if not setHans de Goede
On some devices the BCM Bluetooth adapter does not have a valid bdaddr set. btbcm.c currently sets HCI_QUIRK_INVALID_BDADDR to indicate when this is the case. But this requires users to manual setup a btaddr, by doing e.g.: btmgmt -i hci0 public-addr 'B0:F1:EC:82:1D:B3' Which means that Bluetooth will not work out of the box on such devices. To avoid this (where possible) hci_bcm sets: HCI_QUIRK_USE_BDADDR_PROPERTY which tries to get the bdaddr from devicetree. But this only works on devicetree platforms. On UEFI based platforms there is a special Broadcom UEFI variable which when present contains the devices bdaddr, just like how there is another UEFI variable which contains wifi nvram contents including the wifi MAC address. Add support for getting the bdaddr from this Broadcom UEFI variable, so that Bluetooth will work OOTB for users on devices where this UEFI variable is present. This fixes Bluetooth not working on for example Asus T100HA 2-in-1s. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_h5: Complements reliable packet processing logicQiqi Zhang
As shown in the schematic diagram below.There may be a critical scenario in the current code. If the device does not receive an pure ack sent by the host due to insufficient receive buffer or other reasons and triggers a retransmission, the host will always be in an 'out-of-order' state.The state machine will get stuck. host device SEQ3,ACK4 ---------> <--------- SEQ4,ACK4 pure ACK ---------> (not received) (out-of-order) <--------- SEQ4,ACK4(retransmission) ........ (out-of-order) <--------- SEQ4,ACK4(retransmission) According to the description in the core specification: "whenever a reliable packet is received, an acknowledgment shall be generated." So set H5_TX_ACK_REQ bit to trigger retransmission of pure ack packet when "out-of-order" occurs. Signed-off-by: Qiqi Zhang <eddy.zhang@rock-chips.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btintel: Add Intel devcoredump supportAbhishek Pandit-Subedi
Intercept debug exception events from the controller and put them into a devcoredump using hci devcoredump APIs. The debug exception contains data in a TLV format and it will be parsed in userspace. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Chethan Tumkur Narayan <chethan.tumkur.narayan@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btusb: Add btusb devcoredump supportManish Mandlik
This patch implements the btusb driver side .coredump() callback to trigger a devcoredump via sysfs. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: Add vhci devcoredump supportManish Mandlik
Add devcoredump support for vhci that creates forcce_devcoredump debugfs entry. This is used for mgmt-tester tests. Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btintel: Add LE States quirk supportChethan T N
Basically all Intel controllers support both Central/Peripheral LE states. This patch enables the LE States quirk by default on all Solar and Magnertor Intel controllers. Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855Steev Klimaszewski
Add regulators, GPIOs and changes required to power on/off wcn6855. Add support for firmware download for wcn6855 which is in the linux-firmware repository as hpbtfw21.tlv and hpnv21.bin. Based on the assumption that this is similar to the wcn6750 Tested-on: BTFW.HSP.2.1.0-00538-VER_PATCHZ-1 Signed-off-by: Steev Klimaszewski <steev@kali.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Tested-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btrtl: check for NULL in btrtl_set_quirks()Max Chou
The btrtl_set_quirks() has accessed btrtl_dev->ic_info->lmp_subver since b8e482d02513. However, if installing a Realtek Bluetooth controller without the driver supported, it will hit the NULL point accessed. Add a check for NULL to avoid the Kernel Oops. Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23bluetooth: Add device 13d3:3571 to device tablesLarry Finger
This device is part of a Realtek RTW8852BE chip. The device table is as follows: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3571 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23bluetooth: Add device 0bda:887b to device tablesLarry Finger
This device is part of a Realtek RTW8852BE chip. The device table entry is as follows: T: Bus=03 Lev=01 Prnt=01 Port=12 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=887b Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: NXP: select CONFIG_CRC8Arnd Bergmann
The driver needs both CRC32 and CRC8 to link correctly: ld: drivers/bluetooth/btnxpuart.o: in function `nxp_serdev_probe': drivers/bluetooth/btnxpuart.c:1214: undefined reference to `crc8_populate_msb' ld: drivers/bluetooth/btnxpuart.o: in function `nxp_send_ack': drivers/bluetooth/btnxpuart.c:559: undefined reference to `crc8' ld: drivers/bluetooth/btnxpuart.c:559: undefined reference to `crc8' Fixes: 3e662aa4453a ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsetsNeeraj Sanjay Kale
This adds a driver based on serdev driver for the NXP BT serial protocol based on running H:4, which can enable the built-in Bluetooth device inside an NXP BT chip. This driver has Power Save feature that will put the chip into sleep state whenever there is no activity for 2000ms, and will be woken up when any activity is to be initiated over UART. This driver enables the power save feature by default by sending the vendor specific commands to the chip during setup. During setup, the driver checks if a FW is already running on the chip by waiting for the bootloader signature, and downloads device specific FW file into the chip over UART if bootloader signature is received.. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23serdev: Add method to assert break signal over tty UART portNeeraj Sanjay Kale
Adds serdev_device_break_ctl() and an implementation for ttyport. This function simply calls the break_ctl in tty layer, which can assert a break signal over UART-TX line, if the tty and the underlying platform and UART peripheral supports this operation. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23serdev: Replace all instances of ENOTSUPP with EOPNOTSUPPNeeraj Sanjay Kale
This replaces all instances of ENOTSUPP with EOPNOTSUPP since ENOTSUPP is not a standard error code. This will help maintain consistency in error codes when new serdev API's are added. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_ldisc: Fix tty_set_termios() return value assumptionsIlpo Järvinen
tty_set_termios() never returns anything else than 0. Make the debug prints to look directly into the new termios instead to check CRTSCTS state. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: Improve support for Actions Semi ATS2851 based devicesRaul Cheleguini
Add two more quirks to resume the device initialization and basic operation as the device seems not to support "Read Transmit Power" and "Set Extended Scan Parameters". < HCI Command: LE Read Transmit Power (0x08|0x004b) plen 0 > HCI Event: Command Status (0x0f) plen 4 LE Read Transmit Power (0x08|0x004b) ncmd 1 Status: Unknown HCI Command (0x01) < HCI Command: LE Set Extended Scan Parameters (0x08|0x0041) plen 8 Own address type: Random (0x01) Filter policy: Accept all advertisement (0x00) PHYs: 0x01 Entry 0: LE 1M Type: Active (0x01) Interval: 11.250 msec (0x0012) Window: 11.250 msec (0x0012) > HCI Event: Command Status (0x0f) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Unknown HCI Command (0x01) Signed-off-by: Raul Cheleguini <rcheleguini@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btrtl: add support for the RTL8723CSVasily Khoruzhick
The Realtek RTL8723CS is a SDIO WiFi chip. It also contains a Bluetooth module which is connected via UART to the host. It shares lmp subversion with 8703B, so Realtek's userspace initialization tool (rtk_hciattach) differentiates varieties of RTL8723CS (CG, VF, XX) with RTL8703B using vendor's command to read chip type. Also this chip declares support for some features it doesn't support so add a quirk to indicate that these features are broken. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Bastian Germann <bage@debian.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btmtkuart: mark OF related data as maybe unusedKrzysztof Kozlowski
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/bluetooth/btmtkuart.c:971:36: error: ‘mt7668_data’ defined but not used [-Werror=unused-const-variable=] drivers/bluetooth/btmtkuart.c:966:36: error: ‘mt7663_data’ defined but not used [-Werror=unused-const-variable=] drivers/bluetooth/btmtkuart.c:962:36: error: ‘mt7622_data’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_qca: mark OF related data as maybe unusedKrzysztof Kozlowski
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/bluetooth/hci_qca.c:1869:37: error: ‘qca_soc_data_wcn6750’ defined but not used [-Werror=unused-const-variable=] drivers/bluetooth/hci_qca.c:1853:37: error: ‘qca_soc_data_wcn3998’ defined but not used [-Werror=unused-const-variable=] drivers/bluetooth/hci_qca.c:1841:37: error: ‘qca_soc_data_wcn3991’ defined but not used [-Werror=unused-const-variable=] drivers/bluetooth/hci_qca.c:1830:37: error: ‘qca_soc_data_wcn3990’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btmrvl_sdio: mark OF related data as maybe unusedKrzysztof Kozlowski
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/bluetooth/btmrvl_sdio.c:43:34: error: ‘btmrvl_sdio_of_match_table’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_ll: drop of_match_ptr for ID tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/bluetooth/hci_ll.c:769:34: error: ‘hci_ti_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: Add VID/PID 0489/e0e4 for MediaTek MT7922Meng Tang
Tested on Acer Nitro AN515-47 Notebook output from /sys/kernel/debug/usb/devices: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0e4 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Meng Tang <tangmeng@uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_h5: btrtl: Add support for RTL8821CSChris Morgan
RTL8821CS is a WiFi + Bluetooth combo chip from Realtek that provides WiFi A/B/G/N/AC over an SDIO interface and Bluetooth 4.2 over a UART interface. Note that the firmware this was tested with was firmware version 0x75b8f098. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btusb: Add new PID/VID 04ca:3801 for MT7663Meng Tang
This bluetooth device is found in a combo WLAN/BT card for a MediaTek 7663. Tested on Acer Aspire A315-24P Notebook The device information: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3801 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Meng Tang <tangmeng@uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btrtl: Add support for RTL8852BSVictor Hassan
Add the support for RTL8852BS BT controller on UART interface. The necessary firmware file will be submitted to linux-firmware. Signed-off-by: Victor Hassan <victor@allwinnertech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_mrvl: Add serdev support for 88W8997Stefan Eichenberger
Add serdev support for the 88W8997 from NXP (previously Marvell). It includes support for changing the baud rate. The command to change the baud rate is taken from the user manual UM11483 Rev. 9 in section 7 (Bring-up of Bluetooth interfaces) from NXP. Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_mrvl: use maybe_unused macro for device tree idsStefan Eichenberger
Use the maybe_unused macro for the device tree ids instead of #ifdef CONFIG_OF. This makes it easier to add support for new devices. Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btusb: Do not require hardcoded interface numbersTomasz Moń
Remove hardcoded interface number check because Bluetooth specification since version 4.0 only recommends and no longer requires specific interface numbers. While earlier Bluetooth versions, i.e. 2.1 + EDR and 3.0 + HS, contain required configuration table in Volume 4 - Host Controller Interface Part B - USB Transport Layer, Bluetooth Core Specification Addendum 2 changes the table from required to recommended configuration. Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23net: dpaa: avoid one skb_reset_mac_header() in dpaa_enable_tx_csum()Vladimir Oltean
It appears that dpaa_enable_tx_csum() only calls skb_reset_mac_header() to get to the VLAN header using skb_mac_header(). We can use skb_vlan_eth_hdr() to get to the VLAN header based on skb->data directly. This avoids spending a few cycles to set skb->mac_header. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-23net: vlan: introduce skb_vlan_eth_hdr()Vladimir Oltean
Similar to skb_eth_hdr() introduced in commit 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()"), let's introduce a skb_vlan_eth_hdr() helper which can be used in TX-only code paths to get to the VLAN header based on skb->data rather than based on the skb_mac_header(skb). We also consolidate the drivers that dereference skb->data to go through this helper. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-23drivers/net/phy: add driver for Microchip LAN867x 10BASE-T1S PHYRamón Nordin Rodriguez
This patch adds support for the Microchip LAN867x 10BASE-T1S family (LAN8670/1/2). The driver supports P2MP with PLCA. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ramón Nordin Rodriguez <ramon.nordin.rodriguez@ferroamp.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-23Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== This series lowers the CPU usage of the ice driver when using its provided /dev/gnss*. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-23net: mtk_eth_soc: mediatek: fix ppe flow accounting for v1 hardwareFelix Fietkau
Older chips (like MT7622) use a different bit in ib2 to enable hardware counter support. Add macros for both and select the appropriate bit. Fixes: 3fbe4d8c0e53 ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21Merge tag 'mlx5-updates-2023-04-20' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2023-04-20 1) Dragos Improves RX page pool, and provides some fixes to his previous series: 1.1) Fix releasing page_pool for striding RQ and legacy RQ nonlinear case 1.2) Hook NAPIs to page pools to gain more performance. 2) From Roi, Some cleanups to TC and eswitch modules. 3) Maher migrates vnic diagnostic counters reporting from debugfs to a dedicated devlink health reporter Maher Says: =========== net/mlx5: Expose vnic diagnostic counters using devlink Currently, vnic diagnostic counters are exposed through the following debugfs: $ ls /sys/kernel/debug/mlx5/0000:08:00.0/esw/vf_0/vnic_diag/ cq_overrun quota_exceeded_command total_q_under_processor_handle invalid_command send_queue_priority_update_flow nic_receive_steering_discard The current design does not allow the hypervisor to view the diagnostic counters of its VFs, in case the VFs get bound to a VM. In other words, the counters are not exposed for representor interfaces. Furthermore, the debugfs design is inconvenient future-wise, in case more counters need to be reported by the driver in the future. As these counters pertain to vNIC health, it is more appropriate to utilize the devlink health reporter to expose them. Thus, this patchest includes the following changes: * Drop the current vnic diagnostic counters debugfs interface. * Add a vnic devlink health reporter for PFs/VFs core devices, which when diagnosed will dump vnic diagnostic counter values that are queried from FW. * Add a vnic devlink health reporter for the representor interface, which serves the same purpose listed in the previous point, in addition to allowing the hypervisor to view its VFs diagnostic counters, even when the VFs are bounded to external VMs. Example of devlink health reporter usage is: $devlink health diagnose pci/0000:08:00.0 reporter vnic vNIC env counters: total_error_queues: 0 send_queue_priority_update_flow: 0 comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0 invalid_command: 0 quota_exceeded_command: 0 nic_receive_steering_discard: 0 =========== 4) SW steering fixes and improvements Yevgeny Kliteynik Says: ======================= These short patch series are just small fixes / improvements for SW steering: - Patch 1: Fix dumping of legacy modify_hdr in debug dump to align to what is expected by parser - Patch 2: Have separate threshold for ICM sync per ICM type - Patch 3: Add more info to the steering debug dump - Linux version and device name - Patch 4: Keep track of number of buddies that are currently in use per domain per buddy type ======================= * tag 'mlx5-updates-2023-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Update op_mode to op_mod for port selection net/mlx5: E-Switch, Remove unused mlx5_esw_offloads_vport_metadata_set() net/mlx5: E-Switch, Remove redundant dev arg from mlx5_esw_vport_alloc() net/mlx5: Include linux/pci.h for pci_msix_can_alloc_dyn() net/mlx5e: RX, Hook NAPIs to page pools net/mlx5e: RX, Fix XDP_TX page release for legacy rq nonlinear case net/mlx5e: RX, Fix releasing page_pool pages twice for striding RQ net/mlx5e: Add vnic devlink health reporter to representors net/mlx5: Add vnic devlink health reporter to PFs/VFs Revert "net/mlx5: Expose vnic diagnostic counters for eswitch managed vports" Revert "net/mlx5: Expose steering dropped packets counter" net/mlx5: DR, Add memory statistics for domain object net/mlx5: DR, Add more info in domain dbg dump net/mlx5: DR, Calculate sync threshold of each pool according to its type net/mlx5: DR, Fix dumping of legacy modify_hdr in debug dump ==================== Link: https://lore.kernel.org/r/20230421013850.349646-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-21net: dsa: qca8k: fix LEDS_CLASS dependencyArnd Bergmann
With LEDS_CLASS=m, a built-in qca8k driver fails to link: arm-linux-gnueabi-ld: drivers/net/dsa/qca/qca8k-leds.o: in function `qca8k_setup_led_ctrl': qca8k-leds.c:(.text+0x1ea): undefined reference to `devm_led_classdev_register_ext' Change the dependency to avoid the broken configuration. Fixes: 1e264f9d2918 ("net: dsa: qca8k: add LEDs basic support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230420213639.2243388-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-21net: phy: add basic driver for NXP CBTX PHYVladimir Oltean
The CBTX PHY is a Fast Ethernet PHY integrated into the SJA1110 A/B/C automotive Ethernet switches. It was hoped it would work with the Generic PHY driver, but alas, it doesn't. The most important reason why is that the PHY is powered down by default, and it needs a vendor register to power it on. It has a linear memory map that is accessed over SPI by the SJA1110 switch driver, which exposes a fake MDIO controller. It has the following (and only the following) standard clause 22 registers: 0x0: MII_BMCR 0x1: MII_BMSR 0x2: MII_PHYSID1 0x3: MII_PHYSID2 0x4: MII_ADVERTISE 0x5: MII_LPA 0x6: MII_EXPANSION 0x7: the missing MII_NPAGE for Next Page Transmit Register Every other register is vendor-defined. The register map expands the standard clause 22 5-bit address space of 0x20 registers, however the driver does not need to access the extra registers for now (and hopefully never). If it ever needs to do that, it is possible to implement a fake (software) page switching mechanism between the PHY driver and the SJA1110 MDIO controller driver. Also, Auto-MDIX is turned off by default in hardware, the driver turns it on by default and reports the current status. I've tested this with a VSC8514 link partner and a crossover cable, by forcing the mode on the link partner, and seeing that the CBTX PHY always sees the reverse of the mode forced on the VSC8514 (and that traffic works). The link doesn't come up (as expected) if MDI modes are forced on both ends in the same way (with the cross-over cable, that is). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230418190141.1040562-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-21Merge tag 'wireless-next-2023-04-21' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.4 Most likely the last -next pull request for v6.4. We have changes all over. rtw88 now supports SDIO bus and iwlwifi continues to work on Wi-Fi 7 support. Not much stack changes this time. Major changes: cfg80211/mac80211 - fix some Fine Time Measurement (FTM) frames not being bufferable - flush frames before key removal to avoid potential unencrypted transmission depending on the hardware design iwlwifi - preparation for Wi-Fi 7 EHT and multi-link support rtw88 - SDIO bus support - RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support rtw89 - framework firmware backwards compatibility brcmfmac - Cypress 43439 SDIO support mt76 - mt7921 P2P support - mt7996 mesh A-MSDU support - mt7996 EHT support - mt7996 coredump support wcn36xx - support for pronto v3 hardware ath11k - PCIe DeviceTree bindings - WCN6750: enable SAR support ath10k - convert DeviceTree bindings to YAML * tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (261 commits) wifi: rtw88: Update spelling in main.h wifi: airo: remove ISA_DMA_API dependency wifi: rtl8xxxu: Simplify setting the initial gain wifi: rtl8xxxu: Add rtl8xxxu_write{8,16,32}_{set,clear} wifi: rtl8xxxu: Don't print the vendor/product/serial wifi: rtw88: Fix memory leak in rtw88_usb wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variant wifi: rtw88: set pkg_type correctly for specific rtw8821c variants wifi: rtw88: rtw8821c: Fix rfe_option field width wifi: rtw88: usb: fix priority queue to endpoint mapping wifi: rtw88: 8822c: add iface combination wifi: rtw88: handle station mode concurrent scan with AP mode wifi: rtw88: prevent scan abort with other VIFs wifi: rtw88: refine reserved page flow for AP mode wifi: rtw88: disallow PS during AP mode wifi: rtw88: 8822c: extend reserved page number wifi: rtw88: add port switch for AP mode wifi: rtw88: add bitmap for dynamic port settings wifi: rtw89: mac: use regular int as return type of DLE buffer request wifi: mac80211: remove return value check of debugfs_create_dir() ... ==================== Link: https://lore.kernel.org/r/20230421104726.800BCC433D2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 21:42:46 +0000