| Age | Commit message (Collapse) | Author |
|---|
|
Commit 0daede80f870 ("i2c: designware: Convert driver to using regmap API")
changes the logic to validate the whole 32-bit return value of
DW_IC_DATA_CMD register instead of 8-bit LSB without reason.
Later, commit f53f15ba5a85 ("i2c: designware: Get right data length"),
introduced partial fix but not enough because the "tmp > 0" still test
tmp as 32-bit value and is wrong in case the IC_DATA_CMD[11] is set.
Revert the logic to just before commit 0daede80f870
("i2c: designware: Convert driver to using regmap API").
Fixes: f53f15ba5a85 ("i2c: designware: Get right data length")
Fixes: 0daede80f870 ("i2c: designware: Convert driver to using regmap API")
Cc: stable@vger.kernel.org
Signed-off-by: Tam Nguyen <tamnguyenchi@os.amperecomputing.com>
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20230726080001.337353-2-tamnguyenchi@os.amperecomputing.com
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
On MX8X platforms, the default clock rate is 0 if without explicit
clock setting in dts nodes. I2c can't work when i2c peripheral clk
rate is 0.
Add a i2c peripheral clk rate check before configuring the clock
register. When i2c peripheral clk rate is 0 and directly return
-EINVAL.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Acked-by: Dong Aisheng <Aisheng.dong@nxp.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Commit 03e909acd95a ("drm/panel: simple: Add support for AUO G121EAN01.4
panel") added support for this panel model, but the timings it implements
are very different from what the datasheet describes. I checked both the
G121EAN01.0 datasheet from [0] and the G121EAN01.4 one from [1] and they
all have the same timings: for example the LVDS clock typical value is 74.4
MHz, not 66.7 MHz as implemented.
Replace the timings with the ones from the documentation. These timings
have been tested and the clock frequencies verified with an oscilloscope to
ensure they are correct.
Also use struct display_timing instead of struct drm_display_mode in order
to also specify the minimum and maximum values.
[0] https://embedded.avnet.com/product/g121ean01-0/
[1] https://embedded.avnet.com/product/g121ean01-4/
Fixes: 03e909acd95a ("drm/panel: simple: Add support for AUO G121EAN01.4 panel")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804151239.835216-1-luca.ceresoli@bootlin.com
|
|
Use the dev_err_probe() helper to simplify error handling during probe.
This also handle scenario, when EDEFER is returned and useless error is printed.
Fixes error:
panel-jdi-lt070me05000 4700000.dsi.0: cannot get enable-gpio -517
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230812185239.378582-1-david@ixit.cz
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Hans de Goede:
- lenovo-ymc driver causes keyboard + touchpad to not work with >= 6.4
on some Thinkbook models, fix this
- A set of small fixes for mlx-platform
- Other small fixes and hw-id additions
* tag 'platform-drivers-x86-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: lenovo-ymc: Only bind on machines with a convertible DMI chassis-type
platform: mellanox: Change register offset addresses
platform: mellanox: mlx-platform: Modify graceful shutdown callback and power down mask
platform: mellanox: mlx-platform: Fix signals polarity and latch mask
platform: mellanox: Fix order in exit flow
platform/x86: ISST: Reduce noise for missing numa information in logs
platform/x86: msi-ec: Fix the build
ACPI: scan: Create platform device for CS35L56
platform/x86/amd/pmf: Fix unsigned comparison with less than zero
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Eleven small fixes, ten in drivers.
Of the two fixes marked core, one is in the raid helper class (used by
some raid device drivers) and the other one is the /proc/scsi/scsi
parsing fix for potential reads beyond the end of the buffer"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qedf: Fix firmware halt over suspend and resume
scsi: qedi: Fix firmware halt over suspend and resume
scsi: qedi: Fix potential deadlock on &qedi_percpu->p_work_lock
scsi: lpfc: Remove reftag check in DIF paths
scsi: ufs: renesas: Fix private allocation
scsi: snic: Fix possible memory leak if device_add() fails
scsi: core: Fix possible memory leak if device_add() fails
scsi: core: Fix legacy /proc parsing buffer overflow
scsi: 53c700: Check that command slot is not NULL
scsi: fnic: Replace return codes in fnic_clean_pending_aborts()
scsi: storvsc: Fix handling of virtual Fibre Channel timeouts
|
|
chassis-type
The lenovo-ymc driver is causing the keyboard + touchpad to stop working
on some regular laptop models such as the Lenovo ThinkBook 13s G2 ITL 20V9.
The problem is that there are YMC WMI GUID methods in the ACPI tables
of these laptops, despite them not being Yogas and lenovo-ymc loading
causes libinput to see a SW_TABLET_MODE switch with state 1.
This in turn causes libinput to ignore events from the builtin keyboard
and touchpad, since it filters those out for a Yoga in tablet mode.
Similar issues with false-positive SW_TABLET_MODE=1 reporting have
been seen with the intel-hid driver.
Copy the intel-hid driver approach to fix this and only bind to the WMI
device on machines where the DMI chassis-type indicates the machine
is a convertible.
Add a 'force' module parameter to allow overriding the chassis-type check
so that users can easily test if the YMC interface works on models which
report an unexpected chassis-type.
Fixes: e82882cdd241 ("platform/x86: Add driver for Yoga Tablet Mode switch")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2229373
Cc: André Apitzsch <git@apitzsch.eu>
Cc: stable@vger.kernel.org
Tested-by: Andrew Kallmeyer <kallmeyeras@gmail.com>
Tested-by: Gergő Köteles <soyer@irl.hu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230812144818.383230-1-hdegoede@redhat.com
|
|
Move debug register offsets to different location due to hardware changes.
Fixes: dd635e33b5c9 ("platform: mellanox: Introduce support of new Nvidia L1 switch")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230813083735.39090-5-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
power down mask
Use kernel_power_off() instead of kernel_halt() to pass through
machine_power_off() -> pm_power_off(), otherwise axillary power does
not go off.
Change "power down" bitmask.
Fixes: dd635e33b5c9 ("platform: mellanox: Introduce support of new Nvidia L1 switch")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230813083735.39090-4-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Change polarity of chassis health and power signals and fix latch reset
mask for L1 switch.
Fixes: dd635e33b5c9 ("platform: mellanox: Introduce support of new Nvidia L1 switch")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230813083735.39090-3-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix exit flow order: call mlxplat_post_exit() after
mlxplat_i2c_main_exit() in order to unregister main i2c driver before
to "mlxplat" driver.
Fixes: 0170f616f496 ("platform: mellanox: Split initialization procedure")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230813083735.39090-2-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Uwe reports:
"Most PHYs signal WoL using an interrupt. So disabling interrupts [at
shutdown] breaks WoL at least on PHYs covered by the marvell driver."
Discussing with Ioana, the problem which was trying to be solved was:
"The board in question is a LS1021ATSN which has two AR8031 PHYs that
share an interrupt line. In case only one of the PHYs is probed and
there are pending interrupts on the PHY#2 an IRQ storm will happen
since there is no entity to clear the interrupt from PHY#2's registers.
PHY#1's driver will get stuck in .handle_interrupt() indefinitely."
Further confirmation that "the two AR8031 PHYs are on the same MDIO
bus."
With WoL using interrupts to wake the system, in such a case, the
system will begin booting with an asserted interrupt. Thus, we need to
cope with an interrupt asserted during boot.
Solve this instead by disabling interrupts during PHY probe. This will
ensure in Ioana's situation that both PHYs of the same type sharing an
interrupt line on a common MDIO bus will have their interrupt outputs
disabled when the driver probes the device, but before we hook in any
interrupt handlers - thus avoiding the interrupt storm.
A better fix would be for platform firmware to disable the interrupting
devices at source during boot, before control is handed to the kernel.
Fixes: e2f016cf7751 ("net: phy: add a shutdown procedure")
Link: 20230804071757.383971-1-u.kleine-koenig@pengutronix.de
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- mark virtual chips exposed by gpio-sim as ones that can sleep
(callbacks must not be called from interrupt context)
- fix an off-by-one error in gpio-ws16c48
* tag 'gpio-fixes-for-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: ws16c48: Fix off-by-one error in WS16C48 resource region extent
gpio: sim: mark the GPIO chip as a one that can sleep
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 6.5-rc6 that resolve
some reported issues. Included in here are:
- bunch of iio driver fixes for reported problems
- interconnect driver fixes
- counter driver build fix
- cardreader driver fixes
- binder driver fixes
- other tiny driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
misc: tps6594-esm: Disable ESM for rev 1 PMIC
misc: rtsx: judge ASPM Mode to set PETXCFG Reg
binder: fix memory leak in binder_init()
iio: cros_ec: Fix the allocation size for cros_ec_command
tools/counter: Makefile: Replace rmdir by rm to avoid make,clean failure
iio: imu: lsm6dsx: Fix mount matrix retrieval
iio: adc: meson: fix core clock enable/disable moment
iio: core: Prevent invalid memory access when there is no parent
iio: frequency: admv1013: propagate errors from regulator_get_voltage()
counter: Fix menuconfig "Counter support" submenu entries disappearance
dt-bindings: iio: adi,ad74115: remove ref from -nanoamp
iio: adc: ina2xx: avoid NULL pointer dereference on OF device match
iio: light: bu27008: Fix intensity data type
iio: light: bu27008: Fix scale format
iio: light: bu27034: Fix scale format
iio: adc: ad7192: Fix ac excitation feature
interconnect: qcom: sa8775p: add enable_mask for bcm nodes
interconnect: qcom: sm8550: add enable_mask for bcm nodes
interconnect: qcom: sm8450: add enable_mask for bcm nodes
interconnect: qcom: Add support for mask-based BCMs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for reported
problems. Included in here are:
- thunderbolt driver memory leak fix
- thunderbolt display flicker fix
- usb dwc3 driver fix
- usb gadget uvc disconnect crash fix
- usb typec Kconfig build dependency fix
- usb typec small fixes
- usb-con-gpio bugfix
- usb-storage old driver bugfix
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
thunderbolt: Fix memory leak in tb_handle_dp_bandwidth_request()
usb: dwc3: Properly handle processing of pending events
usb-storage: alauda: Fix uninit-value in alauda_check_media()
usb: common: usb-conn-gpio: Prevent bailing out if initial role is none
USB: Gadget: core: Help prevent panic during UVC unconfigure
usb: typec: mux: intel: Add dependency on USB_COMMON
usb: typec: nb7vpq904m: Add an error handling path in nb7vpq904m_probe()
usb: typec: altmodes/displayport: Signal hpd when configuring pin assignment
usb: typec: tcpm: Fix response to vsafe0V event
thunderbolt: Fix Thunderbolt 3 display flickering issue on 2nd hot plug onwards
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mitigation fixes from Borislav Petkov:
"The first set of fallout fixes after the embargo madness. There will
be another set next week too.
- A first series of cleanups/unifications and documentation
improvements to the SRSO and GDS mitigations code which got
postponed to after the embargo date
- Fix the SRSO aliasing addresses assertion so that the LLVM linker
can parse it too"
* tag 'x86_bugs_for_v6.5_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
driver core: cpu: Fix the fallback cpu_show_gds() name
x86: Move gds_ucode_mitigated() declaration to header
x86/speculation: Add cpu_show_gds() prototype
driver core: cpu: Make cpu_show_not_affected() static
x86/srso: Fix build breakage with the LLVM linker
Documentation/srso: Document IBPB aspect and fix formatting
driver core: cpu: Unify redundant silly stubs
Documentation/hw-vuln: Unify filename specification in index
|
|
Add kfree() in the later error handling in order to avoid memory leak.
Fixes: e0218dca5787 ("soc: aspeed: Add soc info driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230707021625.7727-1-jiasheng@iscas.ac.cn
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230810123104.231167-1-joel@jms.id.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The existing use of match_string() caused it to reject 'echo foo' due
to the implicitly appended newline, which was somewhat ergonomically
awkward and inconsistent with typical sysfs behavior. Using the
__sysfs_* variant instead provides more convenient and consistent
linefeed-agnostic behavior.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes: c6807970c3bc ("soc: aspeed: Add UART routing support")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230628083735.19946-2-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230810122941.231085-1-joel@jms.id.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm irq fixes from Jarkko Sakkinen:
"These change the probing and enabling of interrupts advertised by the
platform firmware (i.e. ACPI, Device Tree) to be an opt-in for tpm_tis,
which can be set from the kernel command-line.
Note that the opt-in change is only for the PC MMIO tpm_tis module. It
does not affect other similar drivers using IRQs, like tpm_tis_spi and
synquacer"
* tag 'tpmdd-v6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm_tis: Opt-in interrupts
tpm: tpm_tis: Fix UPX-i11 DMI_MATCH condition
|
|
Pull rdma fixes from Jason Gunthorpe:
"A few small bugs:
- Fix longstanding mlx5 bug where ODP would fail with certain MR
alignments
- cancel work to prevent a hfi1 UAF
- MAINTAINERS update
- UAF, missing mutex_init and an error unwind bug in bnxt_re"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/bnxt_re: Initialize dpi_tbl_lock mutex
RDMA/bnxt_re: Fix error handling in probe failure path
RDMA/bnxt_re: Properly order ib_device_unalloc() to avoid UAF
MAINTAINERS: Remove maintainer of HiSilicon RoCE
IB/hfi1: Fix possible panic during hotplug remove
RDMA/umem: Set iova in ODP flow
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix sporadic comunication errors in pmbus/bel-pfe and
aquacomputer_d5next drivers
* tag 'hwmon-for-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (aquacomputer_d5next) Add selective 200ms delay after sending ctrl report
hwmon: (pmbus/bel-pfe) Enable PMBUS_SKIP_STATUS_CHECK for pfe1100
|
|
Cc: stable@vger.kernel.org # v6.4+
Link: https://lore.kernel.org/linux-integrity/CAHk-=whRVp4h8uWOX1YO+Y99+44u4s=XxMK4v00B6F1mOfqPLg@mail.gmail.com/
Fixes: e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The patch which made it to the kernel somehow changed the
match condition from
DMI_MATCH(DMI_PRODUCT_NAME, "UPX-TGL01")
to
DMI_MATCH(DMI_PRODUCT_VERSION, "UPX-TGL")
Revert back to the correct match condition to disable the
interrupt mode on the board.
Cc: stable@vger.kernel.org # v6.4+
Fixes: edb13d7bb034 ("tpm: tpm_tis: Disable interrupts *only* for AEON UPX-i11")
Link: https://lore.kernel.org/lkml/20230524085844.11580-1-peter.ujfalusi@linux.intel.com/
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The WinSystems WS16C48 I/O address region spans offsets 0x0 through 0xA,
which is a total of 11 bytes. Fix the WS16C48_EXTENT define to the
correct value of 11 so that access to necessary device registers is
properly requested in the ws16c48_probe() callback by the
devm_request_region() function call.
Fixes: 2c05a0f29f41 ("gpio: ws16c48: Implement and utilize register structures")
Cc: stable@vger.kernel.org
Cc: Paul Demetrotion <pdemetrotion@winsystems.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Rework the handling of interrupt overrides on AMD Zen-based machines
to avoid recently introduced regressions (Hans de Goede).
Note that this is intended as a short-term mitigation for 6.5 and the
long-term approach will be to attempt to use the configuration left by
the BIOS, but it requires more investigation"
* tag 'acpi-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Add IRQ override quirk for PCSpecialist Elimina Pro 16 M
ACPI: resource: Honor MADT INT_SRC_OVR settings for IRQ1 on AMD Zen
ACPI: resource: Always use MADT override IRQ settings for all legacy non i8042 IRQs
ACPI: resource: revert "Remove "Zen" specific match and quirks"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an amd-pstate cpufreq driver issues and recently introduced
hibernation-related breakage.
Specifics:
- Make amd-pstate use device_attributes as expected by the CPU root
kobject (Thomas Weißschuh)
- Restore the previous behavior of resume_store() when hibernation is
not available which is to return the full number of bytes that were
to be written by user space (Vlastimil Babka)"
* tag 'pm-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: amd-pstate: fix global sysfs attribute type
PM: hibernate: fix resume_store() return value when hibernation not available
|
|
We want to fix the serial core port DEVNAME to use a port id of the
hardware specific controller port instance instead of the port->line.
For example, the 8250 driver sets up a number of serial8250 ports
initially that can be inherited by the hardware specific driver. At that
the port->line no longer decribes the port's relation to the serial core
controller instance.
Let's fix the issue by assigning port->port_id for each serial core
controller port instance.
Fixes: 7d695d83767c ("serial: core: Fix serial_base_match() after fixing controller port name")
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230811103648.2826-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The port lock is not always held when calling serial8250_clear_IER().
When an oops is in progress, the lock is tried to be taken and when it
is not, a warning is issued:
WARNING: CPU: 0 PID: 1 at drivers/tty/serial/8250/8250_port.c:707 +0x57/0x60
Modules linked in:
CPU: 0 PID: 1 Comm: init Not tainted 6.5.0-rc5-1.g225bfb7-default+ #774 00f1be860db663ed29479b8255d3b01ab1135bd3
Hardware name: QEMU Standard PC ...
RIP: 0010:serial8250_clear_IER+0x57/0x60
...
Call Trace:
<TASK>
serial8250_console_write+0x9e/0x4b0
console_flush_all+0x217/0x5f0
...
Therefore, remove the annotation as it doesn't hold for all invocations.
The other option would be to make the lockdep test conditional on
'oops_in_progress' or pass 'locked' from serial8250_console_write(). I
don't think, that is worth it.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Cc: John Ogness <john.ogness@linutronix.de>
Fixes: d0b309a5d3f4 (serial: 8250: synchronize and annotate UART_IER access)
Link: https://lore.kernel.org/r/20230811064340.13400-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In commit 9b9c8195f3f0 ("tty: n_gsm: fix UAF in gsm_cleanup_mux"), the UAF
problem is not completely fixed. There is a race condition in
gsm_cleanup_mux(), which caused this UAF.
The UAF problem is triggered by the following race:
task[5046] task[5054]
----------------------- -----------------------
gsm_cleanup_mux();
dlci = gsm->dlci[0];
mutex_lock(&gsm->mutex);
gsm_cleanup_mux();
dlci = gsm->dlci[0]; //Didn't take the lock
gsm_dlci_release(gsm->dlci[i]);
gsm->dlci[i] = NULL;
mutex_unlock(&gsm->mutex);
mutex_lock(&gsm->mutex);
dlci->dead = true; //UAF
Fix it by assigning values after mutex_lock().
Link: https://syzkaller.appspot.com/text?tag=CrashReport&x=176188b5a80000
Cc: stable <stable@kernel.org>
Fixes: 9b9c8195f3f0 ("tty: n_gsm: fix UAF in gsm_cleanup_mux")
Fixes: aa371e96f05d ("tty: n_gsm: fix restart handling via CLD command")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Co-developed-by: Qiumiao Zhang <zhangqiumiao1@huawei.com>
Signed-off-by: Qiumiao Zhang <zhangqiumiao1@huawei.com>
Link: https://lore.kernel.org/r/20230811031121.153237-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fixes for request_queue state (Ming)
- Another uuid quirk (August)
- RCU poll fix for NVMe (Ming)
- Fix for an IO stall with polled IO (me)
- Fix for blk-iocost stats enable/disable accounting (Chengming)
- Regression fix for large pages for zram (Christoph)
* tag 'block-6.5-2023-08-11' of git://git.kernel.dk/linux:
nvme: core: don't hold rcu read lock in nvme_ns_chr_uring_cmd_iopoll
blk-iocost: fix queue stats accounting
block: don't make REQ_POLLED imply REQ_NOWAIT
block: get rid of unused plug->nowait flag
zram: take device and not only bvec offset into account
nvme-pci: add NVME_QUIRK_BOGUS_NID for Samsung PM9B1 256G and 512G
nvme-rdma: fix potential unbalanced freeze & unfreeze
nvme-tcp: fix potential unbalanced freeze & unfreeze
nvme: fix possible hang when removing a controller during error recovery
|
|
In
6524c798b727 ("driver core: cpu: Make cpu_show_not_affected() static")
I fat-fingered the name of cpu_show_gds(). Usually, I'd rebase but since
those are extraordinary embargoed times, the commit above was already
pulled into another tree so no no.
Therefore, fix it ontop.
Fixes: 6524c798b727 ("driver core: cpu: Make cpu_show_not_affected() static")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230811095831.27513-1-bp@alien8.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Add Manivannan Sadhasivam as DesignWare PCIe driver co-maintainer
(Krzysztof Wilczyński)
- Revert "PCI: dwc: Wait for link up only if link is started" to fix a
regression on Qualcomm platforms that don't reach interconnect sync
state if the slot is empty (Johan Hovold)
- Revert "PCI: mvebu: Mark driver as BROKEN" so people can use
pci-mvebu even though some others report problems (Bjorn Helgaas)
- Avoid a NULL pointer dereference when using acpiphp for root bus
hotplug to fix a regression added in v6.5-rc1 (Igor Mammedov)
* tag 'pci-v6.5-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus
Revert "PCI: mvebu: Mark driver as BROKEN"
Revert "PCI: dwc: Wait for link up only if link is started"
MAINTAINERS: Add Manivannan Sadhasivam as DesignWare PCIe driver maintainer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"A bugfix in the LWS code, which used different lock words than the
parisc lightweight spinlock checks. This inconsistency triggered false
positives when the lightweight spinlock checks checked the locks of
mutexes.
The other patches are trivial cleanups and most of them fix sparse
warnings.
Summary:
- Fix LWS code to use same lock words as for the parisc lightweight
spinlocks
- Use PTR_ERR_OR_ZERO() in pdt init code
- Fix lots of sparse warnings"
* tag 'parisc-for-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: perf: Make cpu_device variable static
parisc: ftrace: Add declaration for ftrace_function_trampoline()
parisc: boot: Nuke some sparse warnings in decompressor
parisc: processor: Include asm/smp.h for init_per_cpu()
parisc: unaligned: Include linux/sysctl.h for unaligned_enabled
parisc: Move proc_mckinley_root and proc_runway_root to sba_iommu
parisc: dma: Add prototype for pcxl_dma_start
parisc: parisc_ksyms: Include libgcc.h for libgcc prototypes
parisc: ucmpdi2: Fix no previous prototype for '__ucmpdi2' warning
parisc: firmware: Mark pdc_result buffers local
parisc: firmware: Fix sparse context imbalance warnings
parisc: signal: Fix sparse incorrect type in assignment warning
parisc: ioremap: Fix sparse warnings
parisc: fault: Use C99 arrary initializers
parisc: pdt: Use PTR_ERR_OR_ZERO() to simplify code
parisc: Fix lightweight spinlock checks to not break futexes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull cpuidle psci fixes from Ulf Hansson:
"A couple of cpuidle-psci fixes. Usually, this is managed by arm-soc
maintainers or Rafael, although due to a busy period I have stepped in
to help out:
- Fix the error path to prevent reverting from OSI back to PC mode"
* tag 'cpuidle-psci-v6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
cpuidle: psci: Move enabling OSI mode after power domains creation
cpuidle: dt_idle_genpd: Add helper function to remove genpd topology
|
|
Pull drm fixes from Dave Airlie:
"This week's fixes, as expected amdgpu is probably a little larger
since it skipped a week, but otherwise a few nouveau fixes, a couple
of bridge, rockchip and ivpu fixes.
amdgpu:
- S/G display workaround for platforms with >= 64G of memory
- S0i3 fix
- SMU 13.0.0 fixes
- Disable SMU 13.x OD features temporarily while the interface is
reworked to enable additional functionality
- Fix cursor gamma issues on DCN3+
- SMU 13.0.6 fixes
- Fix possible UAF in CS IOCTL
- Polaris display regression fix
- Only enable CP GFX shadowing on SR-IOV
amdkfd:
- Raven/Picasso KFD regression fix
bridge:
- it6505: runtime PM fix
- lt9611: revert Do not generate HFP/HBP/HSA and EOT packet
nouveau:
- enable global memory loads for helper invocations for userspace
driver
- dp 1.3 dpcd+ workaround fix
- remove unused function
- revert incorrect NULL check
accel/ivpu:
- Add set_pages_array_wc/uc for internal buffers
rockchip:
- Don't spam logs in atomic check"
* tag 'drm-fixes-2023-08-11' of git://anongit.freedesktop.org/drm/drm: (23 commits)
drm/shmem-helper: Reset vma->vm_ops before calling dma_buf_mmap()
drm/amdkfd: disable IOMMUv2 support for Raven
drm/amdkfd: disable IOMMUv2 support for KV/CZ
drm/amdkfd: ignore crat by default
drm/amdgpu/gfx11: only enable CP GFX shadowing on SR-IOV
drm/amd/display: Fix a regression on Polaris cards
drm/amdgpu: fix possible UAF in amdgpu_cs_pass1()
drm/amd/pm: Fix SMU v13.0.6 energy reporting
drm/amd/display: check attr flag before set cursor degamma on DCN3+
drm/amd/pm: disable the SMU13 OD feature support temporarily
drm/amd/pm: correct the pcie width for smu 13.0.0
drm/amd/display: Don't show stack trace for missing eDP
drm/amdgpu: Match against exact bootloader status
drm/amd/pm: skip the RLC stop when S0i3 suspend for SMU v13.0.4/11
drm/amd: Disable S/G for APUs when 64GB or more host memory
drm/rockchip: Don't spam logs in atomic check
accel/ivpu: Add set_pages_array_wc/uc for internal buffers
drm/nouveau/disp: Revert a NULL check inside nouveau_connector_get_modes
Revert "drm/bridge: lt9611: Do not generate HFP/HBP/HSA and EOT packet"
drm/nouveau: remove unused tu102_gr_load() function
...
|
|
The added check of 'req_op(req) == REQ_OP_ZONE_APPEND' should have been
done after the request is confirmed as valid.
Actually here, the request should always been true, so add one
WARN_ON_ONCE(!req), meantime move the zone_append check after
checking the request.
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 29802d7ca33b ("ublk: enable zoned storage support")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230811135216.420404-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now nvme_ns_chr_uring_cmd_iopoll() has switched to request based io
polling, and the associated NS is guaranteed to be live in case of
io polling, so request is guaranteed to be valid because blk-mq uses
pre-allocated request pool.
Remove the rcu read lock in nvme_ns_chr_uring_cmd_iopoll(), which
isn't needed any more after switching to request based io polling.
Fix "BUG: sleeping function called from invalid context" because
set_page_dirty_lock() from blk_rq_unmap_user() may sleep.
Fixes: 585079b6e425 ("nvme: wire up async polling for io passthrough commands")
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Cc: Kanchan Joshi <joshi.k@samsung.com>
Cc: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Link: https://lore.kernel.org/r/20230809020440.174682-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The reference of pdev->dev is taken by of_find_device_by_node, so
it should be released when not need anymore.
Fixes: 7dc54d3b8d91 ("net: pcs: add Renesas MII converter driver")
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 25266128fe16 ("virtio-net: fix race between set queues and
probe") tries to fix the race between set queues and probe by calling
_virtnet_set_queues() before DRIVER_OK is set. This violates virtio
spec. Fixing this by setting queues after virtio_device_ready().
Note that rtnl needs to be held for userspace requests to change the
number of queues. So we are serialized in this way.
Fixes: 25266128fe16 ("virtio-net: fix race between set queues and probe")
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.5-2023-08-09:
amdgpu:
- S/G display workaround for platforms with >= 64G of memory
- S0i3 fix
- SMU 13.0.0 fixes
- Disable SMU 13.x OD features temporarily while the interface is reworked
to enable additional functionality
- Fix cursor gamma issues on DCN3+
- SMU 13.0.6 fixes
- Fix possible UAF in CS IOCTL
- Polaris display regression fix
- Only enable CP GFX shadowing on SR-IOV
amdkfd:
- Raven/Picasso KFD regression fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230809182827.8135-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Multiple fixes for nouveau around memory safety and DisplayPort, one fix
to reduce the log level of rockchip, a power state fix for the it6505
bridge, a timing fix for the lt9611 bridge, a cache maintenance fix for
ivpu and one to reset vma->vm_ops on mmap for shmem-helper.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fwed6gzdtkse5ocrgd37elhyw7qirfptsvfp5mqqverdzifhxj@4da3vesxcqp2
|
|
Cross merge x86 fixes to fix clang linking errors:
ld.lld: error: ./arch/x86/kernel/vmlinux.lds:221: at least one side of the expression must be absolute
These will hopefully be downstream by the time we ship
the next batch of fixes.
* 'x86/bugs' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Move gds_ucode_mitigated() declaration to header
x86/speculation: Add cpu_show_gds() prototype
driver core: cpu: Make cpu_show_not_affected() static
x86/srso: Fix build breakage with the LLVM linker
Documentation/srso: Document IBPB aspect and fix formatting
driver core: cpu: Unify redundant silly stubs
Documentation/hw-vuln: Unify filename specification in index
Link: https://lore.kernel.org/all/CAHk-=wj_b+FGTnevQSBAtCWuhCk=0oQ_THvthBW2hzqpOTLFmg@mail.gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up the procfs root entries for gsc, runway, and mckinley busses.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
If we repeatedly fail to fake offline memory to unplug it, we won't be
sending any unplug requests to the device. However, we only check if the
config changed when sending such (un)plug requests.
We could end up trying for a long time to unplug memory, even though
the config changed already and we're not supposed to unplug memory
anymore. For example, the hypervisor might detect a low-memory situation
while unplugging memory and decide to replug some memory. Continuing
trying to unplug memory in that case can be problematic.
So let's check on a more regular basis.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230713145551.2824980-5-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Mode (SBM)
In case offline_and_remove_memory() fails in SBM, we leave a completely
unplugged Linux memory block stick around until we try plugging memory
again. We won't try removing that memory block again.
offline_and_remove_memory() may, for example, fail if we're racing with
another alloc_contig_range() user, if allocating temporary memory fails,
or if some memory notifier rejected the offlining request.
Let's handle that case better, by simple retrying to offline and remove
such memory.
Tested using CONFIG_MEMORY_NOTIFIER_ERROR_INJECT.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230713145551.2824980-4-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Just like we do with alloc_contig_range(), let's convert all unknown
errors to -EBUSY, but WARN so we can look into the issue. For example,
offline_pages() could fail with -EINTR, which would be unexpected in our
case.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230713145551.2824980-3-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
When "unsafe unplug" is enabled, we don't fake-offline all memory ahead of
actual memory offlining using alloc_contig_range(). Instead, we rely on
offline_pages() to also perform actual page migration, which might fail
or take a very long time.
In that case, it's possible to easily run into endless loops that cannot be
aborted anymore (as offlining is triggered by a workqueue then): For
example, a single (accidentally) permanently unmovable page in
ZONE_MOVABLE results in an endless loop. For ZONE_NORMAL, races between
isolating the pageblock (and checking for unmovable pages) and
concurrent page allocation are possible and similarly result in endless
loops.
The idea of the unsafe unplug mode was to make it possible to more
reliably unplug large memory blocks. However, (a) we really should be
tackling that differently, by extending the alloc_contig_range()-based
mechanism; and (b) this mode is not the default and as far as I know,
it's unused either way.
So let's simply get rid of it.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230713145551.2824980-2-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Make clearer in debugfs output the difference between the hw
feature bits, the features supported through the driver, and
the features that have been negotiated.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230711042437.69381-6-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
We were allocating irq vectors at the time the aux dev was probed,
but that is before the PCI VF is assigned to a separate iommu domain
by vhost_vdpa. Because vhost_vdpa later changes the iommu domain the
interrupts do not work.
Instead, we can allocate the irq vectors later when we see DRIVER_OK and
know that the reassignment of the PCI VF to an iommu domain has already
happened.
Fixes: 151cc834f3dd ("pds_vdpa: add support for vdpa and vdpamgmt interfaces")
Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230711042437.69381-5-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Make sure that we initialize the vqs[] entries the same
way both for initial setup and after a vq reset.
Fixes: 151cc834f3dd ("pds_vdpa: add support for vdpa and vdpamgmt interfaces")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230711042437.69381-4-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
