| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Fix the arming of wakeup IRQs in the generic wakeup IRQ code
(wakeirq), drop unused functions from it and fix up a driver using it
and trying to work around the IRQ arming issue in a questionable way
(Johan Hovold)"
* tag 'pm-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
serial: qcom-geni: drop bogus runtime pm state update
PM: sleep: wakeirq: drop unused enable helpers
PM: sleep: wakeirq: fix wake irq arming
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- k10temp: Display negative temperatures for industrial processors
- pmbus core: Fix deadlock, NULL pointer dereference, and chip enable
detection
- nct7802: Do not display PECI1 temperature if disabled
- nct6775: Fix IN scaling factors and feature detection for
NCT6798/6799
- oxp-sensors: Fix race condition during device attribute creation
- aquacomputer_d5next: Fix incorrect PWM value readout
* tag 'hwmon-for-v6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (k10temp) Enable AMD3255 Proc to show negative temperature
hwmon: (pmbus_core) Fix Deadlock in pmbus_regulator_get_status
hwmon: (pmbus_core) Fix NULL pointer dereference
hwmon: (pmbus_core) Fix pmbus_is_enabled()
hwmon: (nct7802) Fix for temp6 (PECI1) processed even if PECI1 disabled
hwmon: (nct6775) Fix IN scaling factors for 6798/6799
hwmon: (oxp-sensors) Move tt_toggle attribute to dev_groups
hwmon: (aquacomputer_d5next) Fix incorrect PWM value readout
hwmon: (nct6775) Fix register for nct6799
|
|
Pull rdma fixes from Jason Gunthorpe:
"Several smaller driver fixes and a core RDMA CM regression fix:
- Fix improperly accepting flags from userspace in mlx4
- Add missing DMA barriers for irdma
- Fix two kcsan warnings in irdma
- Report the correct CQ op code to userspace in irdma
- Report the correct MW bind error code for irdma
- Load the destination address in RDMA CM to resolve a recent
regression
- Fix a QP regression in mthca
- Remove a race processing completions in bnxt_re resulting in a
crash
- Fix driver unloading races with interrupts and tasklets in bnxt_re
- Fix missing error unwind in rxe"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/irdma: Report correct WC error
RDMA/irdma: Fix op_type reporting in CQEs
RDMA/rxe: Fix an error handling path in rxe_bind_mw()
RDMA/bnxt_re: Fix hang during driver unload
RDMA/bnxt_re: Prevent handling any completions after qp destroy
RDMA/mthca: Fix crash when polling CQ for shared QPs
RDMA/core: Update CMA destination address on rdma_resolve_addr
RDMA/irdma: Fix data race on CQP request done
RDMA/irdma: Fix data race on CQP completion stats
RDMA/irdma: Add missing read barriers
RDMA/mlx4: Make check for invalid flags stricter
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"I picked up three small scale updates that I think would improve the
quality of the release"
* tag 'tpmdd-v6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm_tis: Explicitly check for error code
tpm: Switch i2c drivers back to use .probe()
security: keys: perform capable check only on privileged operations
|
|
If the device does not support Sanitize or Secure Erase commands,
hide the respective sysfs interfaces such that the operation can
never be attempted.
In order to be generic, keep track of the enabled security commands
found in the CEL - the driver does not support Security Passthrough.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230726051940.3570-4-dave@stgolabs.net
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
|
|
... as is the case with all members of struct cxl_memdev_state.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230726051940.3570-3-dave@stgolabs.net
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- A couple of SME updates for recent fixes (one of which went to
stable): reverting the flushing of the SME hardware state along with
the thread flushing and making sure we have the correct vector length
before reallocating.
- An ACPI/IORT fix to avoid skipping ID mappings whose "number of IDs"
is 0 (the spec reports the number of IDs in the mapping range minus
1).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ACPI/IORT: Remove erroneous id_count check in iort_node_get_rmr_info()
arm64/sme: Set new vector length before reallocating
arm64/fpsimd: Don't flush SME register hardware state along with thread
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A fix for a performance problem in QubesOS, adding a way to drain the
queue of grants experiencing delayed unmaps faster
- A patch enabling the use of static event channels from user mode,
which was omitted when introducing supporting static event channels
- A fix for a problem where Xen related code didn't check properly for
running in a Xen environment, resulting in a WARN splat
* tag 'for-linus-6.5a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: speed up grant-table reclaim
xen/evtchn: Introduce new IOCTL to bind static evtchn
xenbus: check xen_domain in xenbus_probe_initcall
|
|
recv_data either returns the number of received bytes, or a negative value
representing an error code. Adding the return value directly to the total
number of received bytes therefore looks a little weird, since it might add
a negative error code to a sum of bytes.
The following check for size < expected usually makes the function return
ETIME in that case, so it does not cause too many problems in practice. But
to make the code look cleaner and because the caller might still be
interested in the original error code, explicitly check for the presence of
an error code and pass that through.
Cc: stable@vger.kernel.org
Fixes: cb5354253af2 ("[PATCH] tpm: spacing cleanups 2")
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Pull ceph fixes from Ilya Dryomov:
"A patch to reduce the potential for erroneous RBD exclusive lock
blocklisting (fencing) with a couple of prerequisites and a fixup to
prevent metrics from being sent to the MDS even just once after that
has been disabled by the user. All marked for stable"
* tag 'ceph-for-6.5-rc4' of https://github.com/ceph/ceph-client:
rbd: retrieve and check lock owner twice before blocklisting
rbd: harden get_lock_owner_info() a bit
rbd: make get_lock_owner_info() return a single locker or NULL
ceph: never send metrics if disable_send_metrics is set
|
|
Pull block fixes from Jens Axboe:
"A few fixes that should go into the current kernel release, mainly:
- Set of fixes for dasd (Stefan)
- Handle interruptible waits returning because of a signal for ublk
(Ming)"
* tag 'block-6.5-2023-07-28' of git://git.kernel.dk/linux:
ublk: return -EINTR if breaking from waiting for existed users in DEL_DEV
ublk: fail to recover device if queue setup is interrupted
ublk: fail to start device if queue setup is interrupted
block: Fix a source code comment in include/uapi/linux/blkzoned.h
s390/dasd: print copy pair message only for the correct error
s390/dasd: fix hanging device after request requeue
s390/dasd: use correct number of retries for ERP requests
s390/dasd: fix hanging device after quiesce/resume
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Two user triggerable problems:
- Syzkaller found a way to trigger a WARN_ON and leak memory by
racing destroy with other actions
- There is still a bug in the "batch carry" stuff that gets invoked
for complex cases with accesses and unmapping of huge pages. The
test suite found this (triggers rarely)"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Set end correctly when doing batch carry
iommufd: IOMMUFD_DESTROY should not increase the refcount
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix double free on memory allocation failure in DM integrity target's
integrity_recalc()
- Fix locking in DM raid target's raid_ctr() and around call to
md_stop()
- Fix DM cache target's cleaner policy to always allow work to be
queued for writeback; even if cache isn't idle.
* tag 'for-6.5/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache policy smq: ensure IO doesn't prevent cleaner policy progress
dm raid: protect md_stop() with 'reconfig_mutex'
dm raid: clean up four equivalent goto tags in raid_ctr()
dm raid: fix missing reconfig_mutex unlock in raid_ctr() error paths
dm integrity: fix double free on memory allocation failure
|
|
Pull drm fixes from Dave Airlie:
"Regular scheduled fixes, msm and amdgpu leading the way, with some
i915 and a single misc fbdev, all seems fine.
fbdev:
- remove unused function
amdgpu:
- gfxhub partition fix
- Fix error handling in psp_sw_init()
- SMU13 fix
- DCN 3.1 fix
- DCN 3.2 fix
- Fix for display PHY programming sequence
- DP MST error handling fix
- GFX 9.4.3 fix
amdkfd:
- GFX11 trap handling fix
i915:
- Use shmem for dpt objects
- Fix an error handling path in igt_write_huge()
msm:
- display:
- Fix to correct the UBWC programming for decoder version 4.3 seen
on SM8550
- Add the missing flush and fetch bits for DMA4 and DMA5 SSPPs.
- Fix to drop the unused dpu_core_perf_data_bus_id enum from the
code
- Drop the unused dsi_phy_14nm_17mA_regulators from QCM 2290 DSI
cfg.
- gpu:
- Fix warn splat for newer devices without revn
- Remove name/revn for a690.. we shouldn't be populating these for
newer devices, for consistency, but it slipped through review
- Fix a6xx gpu snapshot BINDLESS_DATA size (was listed in bytes
instead of dwords, causing AHB faults on a6xx gen4/a660-family)
- Disallow submit with fence id 0"
* tag 'drm-fixes-2023-07-28' of git://anongit.freedesktop.org/drm/drm: (22 commits)
drm/msm: Disallow submit with fence id 0
drm/amdgpu: Restore HQD persistent state register
drm/amd/display: Unlock on error path in dm_handle_mst_sideband_msg_ready_event()
drm/amd/display: Exit idle optimizations before attempt to access PHY
drm/amd/display: Don't apply FIFO resync W/A if rdivider = 0
drm/amd/display: Guard DCN31 PHYD32CLK logic against chip family
drm/amd/smu: use AverageGfxclkFrequency* to replace previous GFX Curr Clock
drm/amd: Fix an error handling mistake in psp_sw_init()
drm/amdgpu: Fix infinite loop in gfxhub_v1_2_xcc_gart_enable (v2)
drm/amdkfd: fix trap handling work around for debugging
drm/fb-helper: Remove unused inline function drm_fb_helper_defio_init()
drm/i915: Fix an error handling path in igt_write_huge()
drm/i915/dpt: Use shmem for dpt objects
drm/msm: Fix hw_fence error path cleanup
drm/msm: Fix IS_ERR_OR_NULL() vs NULL check in a5xx_submit_in_rb()
drm/msm/adreno: Fix snapshot BINDLESS_DATA size
drm/msm/a690: Remove revn and name
drm/msm/adreno: Fix warn splat for devices without revn
drm/msm/dsi: Drop unused regulators from QCM2290 14nm DSI PHY config
drm/msm/dpu: drop enum dpu_core_perf_data_bus_id
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Vishal Verma:
- Update MAINTAINERS for cxl
- A few static analysis fixes
- Fix a Kconfig dependency for CONFIG_FW_LOADER
* tag 'cxl-fixes-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
tools/testing/cxl: Remove unused SZ_512G macro
cxl/acpi: Return 'rc' instead of '0' in cxl_parse_cfmws()
cxl/acpi: Fix a use-after-free in cxl_parse_cfmws()
cxl: Update MAINTAINERS
cxl/mem: Fix a double shift bug
cxl: fix CONFIG_FW_LOADER dependency
|
|
When hactive is not aligned to 8 pixels, it is aligned accordingly and
hfront porch needs to be reduced the same amount. Unfortunately the front
porch is set to the difference rather than reducing it. There are some
Samsung TVs which can't cope with a front porch of instead of 70.
Fixes: 94dfec48fca7 ("drm/imx: Add 8 pixel alignment fix")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20230515072137.116211-1-alexander.stein@ew.tq-group.com
[p.zabel@pengutronix.de: Fixed subject]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515072137.116211-1-alexander.stein@ew.tq-group.com
|
|
According to the ARM IORT specifications DEN 0049 issue E,
the "Number of IDs" field in the ID mapping format reports
the number of IDs in the mapping range minus one.
In iort_node_get_rmr_info(), we erroneously skip ID mappings
whose "Number of IDs" equal to 0, resulting in valid mapping
nodes with a single ID to map being skipped, which is wrong.
Fix iort_node_get_rmr_info() by removing the bogus id_count
check.
Fixes: 491cf4a6735a ("ACPI/IORT: Add support to retrieve IORT RMR reserved regions")
Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # 6.0.x
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/1689593625-45213-1-git-send-email-guanghuifeng@linux.alibaba.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When commit 716c330433e3 ("media: uvcvideo: Use standard names for
menus") reworked the handling of menu controls, it inadvertently
replaced a GENMASK(n - 1, 0) with a BIT_MASK(n). The latter isn't
equivalent to the former, which broke adding XU mappings from userspace.
Fix it.
Link: https://lore.kernel.org/linux-media/468a36ec-c3ac-cb47-e12f-5906239ae3cd@spahan.ch/
Cc: stable@vger.kernel.org
Reported-by: Poncho <poncho@spahan.ch>
Fixes: 716c330433e3 ("media: uvcvideo: Use standard names for menus")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In the multi-core JPEG encoder/decoder setup, the driver for the
individual cores references the parent device's platform driver data.
However, in the parent driver, this is only set at the end of the probe
function, way later than devm_of_platform_populate(), which triggers
the probe of the cores. This causes a kernel splat in the sub-device
probe function.
Move platform_set_drvdata() to before devm_of_platform_populate() to
fix this.
Fixes: 934e8bccac95 ("mtk-jpegenc: support jpegenc multi-hardware")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-07-26
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Unregister devlink params in case interface is down
net/mlx5: DR, Fix peer domain namespace setting
net/mlx5: fs_chains: Fix ft prio if ignore_flow_level is not supported
net/mlx5e: kTLS, Fix protection domain in use syndrome when devlink reload
net/mlx5: Bridge, set debugfs access right to root-only
net/mlx5e: xsk: Fix crash on regular rq reactivation
net/mlx5e: xsk: Fix invalid buffer access for legacy rq
net/mlx5e: Move representor neigh cleanup to profile cleanup_tx
net/mlx5e: Fix crash moving to switchdev mode when ntuple offload is set
net/mlx5e: Don't hold encap tbl lock if there is no encap action
net/mlx5: Honor user input for migratable port fn attr
net/mlx5e: fix return value check in mlx5e_ipsec_remove_trailer()
net/mlx5: fix potential memory leak in mlx5e_init_rep_rx
net/mlx5: DR, fix memory leak in mlx5dr_cmd_create_reformat_ctx
net/mlx5e: fix double free in macsec_fs_tx_create_crypto_table_groups
====================
Link: https://lore.kernel.org/r/20230726213206.47022-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
in bcm_sf2_sw_probe(), check the return value of clk_prepare_enable()
and return the error code if clk_prepare_enable() returns an
unexpected value.
Fixes: e9ec5c3bd238 ("net: dsa: bcm_sf2: request and handle clocks")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230726170506.16547-1-ruc_gongyuanjun@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The condition to fetch sense data was supposed to be:
ATA_SENSE set AND either
1) Command was NCQ and ATA_DFLAG_CDL_ENABLED flag set (flag
ATA_DFLAG_CDL_ENABLED will only be set if the Successful NCQ command
sense data supported bit is set); or
2) Command was non-NCQ and regular sense data reporting is enabled.
However the check in 2) accidentally had the negation at the wrong place,
causing it to try to fetch sense data if it was a non-NCQ command _or_
if regular sense data reporting was _not_ enabled.
Fix this by removing the extra parentheses that should not be there,
such that only the correct return (ata_is_ncq()) is negated.
Fixes: 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD")
Reported-by: Borislav Petkov <bp@alien8.de>
Closes: https://lore.kernel.org/linux-ide/20230722155621.GIZLv8JbURKzHtKvQE@fat_crate.local/
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.5-rc4
Display:
+ Fix to correct the UBWC programming for decoder version 4.3 seen
on SM8550
+ Add the missing flush and fetch bits for DMA4 and DMA5 SSPPs.
+ Fix to drop the unused dpu_core_perf_data_bus_id enum from the code
+ Drop the unused dsi_phy_14nm_17mA_regulators from QCM 2290 DSI cfg.
GPU:
+ Fix warn splat for newer devices without revn
+ Remove name/revn for a690.. we shouldn't be populating these for
newer devices, for consistency, but it slipped through review
+ Fix a6xx gpu snapshot BINDLESS_DATA size (was listed in bytes
instead of dwords, causing AHB faults on a6xx gen4/a660-family)
+ Disallow submit with fence id 0
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs9MwCSfiyv8i7yWAsJKYEzCDyzaTx=ujX80Y23rZd9RA@mail.gmail.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.5-2023-07-26:
amdgpu:
- gfxhub partition fix
- Fix error handling in psp_sw_init()
- SMU13 fix
- DCN 3.1 fix
- DCN 3.2 fix
- Fix for display PHY programming sequence
- DP MST error handling fix
- GFX 9.4.3 fix
amdkfd:
- GFX11 trap handling fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230726184936.7812-1-alexander.deucher@amd.com
|
|
The global function triggers a warning because of the missing prototype
drivers/ata/pata_ns87415.c:263:6: warning: no previous prototype for 'ns87560_tf_read' [-Wmissing-prototypes]
263 | void ns87560_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
There are no other references to this, so just make it static.
Fixes: c4b5b7b6c4423 ("pata_ns87415: Initial cut at 87415/87560 IDE support")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, netfilter.
Current release - regressions:
- core: fix splice_to_socket() for O_NONBLOCK socket
- af_unix: fix fortify_panic() in unix_bind_bsd().
- can: raw: fix lockdep issue in raw_release()
Previous releases - regressions:
- tcp: reduce chance of collisions in inet6_hashfn().
- netfilter: skip immediate deactivate in _PREPARE_ERROR
- tipc: stop tipc crypto on failure in tipc_node_create
- eth: igc: fix kernel panic during ndo_tx_timeout callback
- eth: iavf: fix potential deadlock on allocation failure
Previous releases - always broken:
- ipv6: fix bug where deleting a mngtmpaddr can create a new
temporary address
- eth: ice: fix memory management in ice_ethtool_fdir.c
- eth: hns3: fix the imp capability bit cannot exceed 32 bits issue
- eth: vxlan: calculate correct header length for GPE
- eth: stmmac: apply redundant write work around on 4.xx too"
* tag 'net-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
tipc: stop tipc crypto on failure in tipc_node_create
af_unix: Terminate sun_path when bind()ing pathname socket.
tipc: check return value of pskb_trim()
benet: fix return value check in be_lancer_xmit_workarounds()
virtio-net: fix race between set queues and probe
net/sched: mqprio: Add length check for TCA_MQPRIO_{MAX/MIN}_RATE64
splice, net: Fix splice_to_socket() for O_NONBLOCK socket
net: fec: tx processing does not call XDP APIs if budget is 0
mptcp: more accurate NL event generation
selftests: mptcp: join: only check for ip6tables if needed
tools: ynl-gen: fix parse multi-attr enum attribute
tools: ynl-gen: fix enum index in _decode_enum(..)
netfilter: nf_tables: disallow rule addition to bound chain via NFTA_RULE_CHAIN_ID
netfilter: nf_tables: skip immediate deactivate in _PREPARE_ERROR
netfilter: nft_set_rbtree: fix overlap expiration walk
igc: Fix Kernel Panic during ndo_tx_timeout callback
net: dsa: qca8k: fix mdb add/del case with 0 VID
net: dsa: qca8k: fix broken search_and_del
net: dsa: qca8k: fix search_and_insert wrong handling of new rule
net: dsa: qca8k: enable use_single_write for qca8xxx
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fixes from Vinod Koul:
- Core fix for enumeration completion
- Qualcomm driver fix to update status
- AMD driver fix for probe error check
* tag 'soundwire-6.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: Fix a check for errors in probe()
soundwire: qcom: update status correctly with mask
soundwire: fix enumeration completion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- Out of bound fix for hisilicon phy
- Qualcomm synopsis femto phy for keeping clock enabled during suspend
and enabling ref clocks
- Mediatek driver fixes for upper limit test and error code
* tag 'phy-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: hisilicon: Fix an out of bounds check in hisi_inno_phy_probe()
phy: qcom-snps-femto-v2: use qcom_snps_hsphy_suspend/resume error code
phy: qcom-snps-femto-v2: properly enable ref clock
phy: qcom-snps-femto-v2: keep cfg_ahb_clk enabled during runtime suspend
phy: mediatek: hdmi: mt8195: fix prediv bad upper limit test
phy: phy-mtk-dp: Fix an error code in probe()
|
|
Prefer struct_size_t() over struct_size() when no pointer instance
of the structure type is present.
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Link: https://lore.kernel.org/r/ZKBfoqSl61jfpO2r@work
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Industrial processor i3255 supports temperatures -40 deg celcius
to 105 deg Celcius. The current implementation of k10temp_read_temp
rounds off any negative temperatures to '0'. To fix this,
the following changes have been made.
A flag 'disp_negative' is added to struct k10temp_data to support
AMD i3255 processors. Flag 'disp_negative' is set if 3255 processor
is found during k10temp_probe. Flag 'disp_negative' is used to
determine whether to round off negative temperatures to '0' in
k10temp_read_temp.
Signed-off-by: Baskaran Kannan <Baski.Kannan@amd.com>
Link: https://lore.kernel.org/r/20230727162159.1056136-1-Baski.Kannan@amd.com
Fixes: aef17ca12719 ("hwmon: (k10temp) Only apply temperature offset if result is positive")
Cc: stable@vger.kernel.org
[groeck: Fixed multi-line comment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
'op-cs' is copied in 'fun->mchip_number' which is used to access the
'mchip_offsets' and the 'rnb_gpio' arrays.
These arrays have NAND_MAX_CHIPS elements, so the index must be below this
limit.
Fix the sanity check in order to avoid the NAND_MAX_CHIPS value. This
would lead to out-of-bound accesses.
Fixes: 54309d657767 ("mtd: rawnand: fsl_upm: Implement exec_op()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/cd01cba1c7eda58bdabaae174c78c067325803d2.1689803636.git.christophe.jaillet@wanadoo.fr
|
|
gcc gets confused when -ftrivial-auto-var-init=pattern is used on sparse
bit fields such as 'struct spi_mem_op', which caused the previous false
positive warning about an uninitialized variable:
drivers/mtd/spi-nor/spansion.c: error: 'op' is used uninitialized [-Werror=uninitialized]
In fact, the variable is fully initialized and gcc does not see it being
used, so the warning is entirely bogus. The problem appears to be
a misoptimization in the initialization of single bit fields when the
rest of the bytes are not initialized.
A previous workaround added another initialization, which ended up
shutting up the warning in spansion.c, though it apparently still happens
in other files as reported by Peter Foley in the gcc bugzilla. The
workaround of adding a fake initialization seems particularly bad
because it would set values that can never be correct but prevent the
compiler from warning about actually missing initializations.
Revert the broken workaround and instead pad the structure to only
have bitfields that add up to full bytes, which should avoid this
behavior in all drivers.
I also filed a new bug against gcc with what I found, so this can
hopefully be addressed in future gcc releases. At the moment, only
gcc-12 and gcc-13 are affected.
Cc: Peter Foley <pefoley2@pefoley.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110743
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108402
Link: https://godbolt.org/z/efMMsG1Kx
Fixes: 420c4495b5e56 ("mtd: spi-nor: spansion: make sure local struct does not contain garbage")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230719190045.4007391-1-arnd@kernel.org
|
|
Even though the test suite covers this it somehow became obscured that
this wasn't working.
The test iommufd_ioas.mock_domain.access_domain_destory would blow up
rarely.
end should be set to 1 because this just pushed an item, the carry, to the
pfns list.
Sometimes the test would blow up with:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 5 PID: 584 Comm: iommufd Not tainted 6.5.0-rc1-dirty #1236
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:batch_unpin+0xa2/0x100 [iommufd]
Code: 17 48 81 fe ff ff 07 00 77 70 48 8b 15 b7 be 97 e2 48 85 d2 74 14 48 8b 14 fa 48 85 d2 74 0b 40 0f b6 f6 48 c1 e6 04 48 01 f2 <48> 8b 3a 48 c1 e0 06 89 ca 48 89 de 48 83 e7 f0 48 01 c7 e8 96 dc
RSP: 0018:ffffc90001677a58 EFLAGS: 00010246
RAX: 00007f7e2646f000 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 00000000fefc4c8d RDI: 0000000000fefc4c
RBP: ffffc90001677a80 R08: 0000000000000048 R09: 0000000000000200
R10: 0000000000030b98 R11: ffffffff81f3bb40 R12: 0000000000000001
R13: ffff888101f75800 R14: ffffc90001677ad0 R15: 00000000000001fe
FS: 00007f9323679740(0000) GS:ffff8881ba540000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000105ede003 CR4: 00000000003706a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? show_regs+0x5c/0x70
? __die+0x1f/0x60
? page_fault_oops+0x15d/0x440
? lock_release+0xbc/0x240
? exc_page_fault+0x4a4/0x970
? asm_exc_page_fault+0x27/0x30
? batch_unpin+0xa2/0x100 [iommufd]
? batch_unpin+0xba/0x100 [iommufd]
__iopt_area_unfill_domain+0x198/0x430 [iommufd]
? __mutex_lock+0x8c/0xb80
? __mutex_lock+0x6aa/0xb80
? xa_erase+0x28/0x30
? iopt_table_remove_domain+0x162/0x320 [iommufd]
? lock_release+0xbc/0x240
iopt_area_unfill_domain+0xd/0x10 [iommufd]
iopt_table_remove_domain+0x195/0x320 [iommufd]
iommufd_hw_pagetable_destroy+0xb3/0x110 [iommufd]
iommufd_object_destroy_user+0x8e/0xf0 [iommufd]
iommufd_device_detach+0xc5/0x140 [iommufd]
iommufd_selftest_destroy+0x1f/0x70 [iommufd]
iommufd_object_destroy_user+0x8e/0xf0 [iommufd]
iommufd_destroy+0x3a/0x50 [iommufd]
iommufd_fops_ioctl+0xfb/0x170 [iommufd]
__x64_sys_ioctl+0x40d/0x9a0
do_syscall_64+0x3c/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Link: https://lore.kernel.org/r/3-v1-85aacb2af554+bc-iommufd_syz3_jgg@nvidia.com
Cc: <stable@vger.kernel.org>
Fixes: f394576eb11d ("iommufd: PFN handling for iopt_pages")
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reported-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
syzkaller found a race where IOMMUFD_DESTROY increments the refcount:
obj = iommufd_get_object(ucmd->ictx, cmd->id, IOMMUFD_OBJ_ANY);
if (IS_ERR(obj))
return PTR_ERR(obj);
iommufd_ref_to_users(obj);
/* See iommufd_ref_to_users() */
if (!iommufd_object_destroy_user(ucmd->ictx, obj))
As part of the sequence to join the two existing primitives together.
Allowing the refcount the be elevated without holding the destroy_rwsem
violates the assumption that all temporary refcount elevations are
protected by destroy_rwsem. Racing IOMMUFD_DESTROY with
iommufd_object_destroy_user() will cause spurious failures:
WARNING: CPU: 0 PID: 3076 at drivers/iommu/iommufd/device.c:477 iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:478
Modules linked in:
CPU: 0 PID: 3076 Comm: syz-executor.0 Not tainted 6.3.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023
RIP: 0010:iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:477
Code: e8 3d 4e 00 00 84 c0 74 01 c3 0f 0b c3 0f 1f 44 00 00 f3 0f 1e fa 48 89 fe 48 8b bf a8 00 00 00 e8 1d 4e 00 00 84 c0 74 01 c3 <0f> 0b c3 0f 1f 44 00 00 41 57 41 56 41 55 4c 8d ae d0 00 00 00 41
RSP: 0018:ffffc90003067e08 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888109ea0300 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000ffffffff
RBP: 0000000000000004 R08: 0000000000000000 R09: ffff88810bbb3500
R10: ffff88810bbb3e48 R11: 0000000000000000 R12: ffffc90003067e88
R13: ffffc90003067ea8 R14: ffff888101249800 R15: 00000000fffffffe
FS: 00007ff7254fe6c0(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555557262da8 CR3: 000000010a6fd000 CR4: 0000000000350ef0
Call Trace:
<TASK>
iommufd_test_create_access drivers/iommu/iommufd/selftest.c:596 [inline]
iommufd_test+0x71c/0xcf0 drivers/iommu/iommufd/selftest.c:813
iommufd_fops_ioctl+0x10f/0x1b0 drivers/iommu/iommufd/main.c:337
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x84/0xc0 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The solution is to not increment the refcount on the IOMMUFD_DESTROY path
at all. Instead use the xa_lock to serialize everything. The refcount
check == 1 and xa_erase can be done under a single critical region. This
avoids the need for any refcount incrementing.
It has the downside that if userspace races destroy with other operations
it will get an EBUSY instead of waiting, but this is kind of racing is
already dangerous.
Fixes: 2ff4bed7fee7 ("iommufd: File descriptor, context, kconfig and makefiles")
Link: https://lore.kernel.org/r/2-v1-85aacb2af554+bc-iommufd_syz3_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reported-by: syzbot+7574ebfe589049630608@syzkaller.appspotmail.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/fixes
Memory controller drivers - fixes for v6.5
Two fixes are needed for Tegra194 memory controllers caused by the same
Tegra PCI commit merged in v6.5-rc1. The Tegra PCI requires now
interconnect from the memory controller, which was set only for
Tegra234, but not for Tegra194, causing probe deferrals. Expose some
dummy interconnect provider for Tegra194, to satisfy PCI driver needs.
* tag 'memory-controller-drv-fixes-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra: make icc_set_bw return zero if BWMGR not supported
memory: tegra: Add dummy implementation on Tegra194
Link: https://lore.kernel.org/r/20230726084811.124038-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.5:
- A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU
frequency of sk-imx53 board
- Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux
- A couple of imx8mm-venice fixes from Tim Harvey to diable disp_blk_ctrl
- A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct
VPU label and gpio-line-names
- Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as bus_power_dev
child, so that runtime PM can translate into the necessary GPC power
domain action
* tag 'imx-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child
ARM: dts: nxp/imx: limit sk-imx53 supported frequencies
arm64: dts: freescale: Fix VPU G2 clock
arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux
arm64: dts: phycore-imx8mm: Correction in gpio-line-names
arm64: dts: phycore-imx8mm: Label typo-fix of VPU
ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node
arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl
arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl
Link: https://lore.kernel.org/r/20230725075837.GR151430@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
If user interrupts wait_event_interruptible() in ublk_ctrl_del_dev(),
return -EINTR and let user know what happens.
Fixes: 0abe39dec065 ("block: ublk: improve handling device deletion")
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20230726144502.566785-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In ublk_ctrl_end_recovery(), if wait_for_completion_interruptible() is
interrupted by signal, queues aren't setup successfully yet, so we
have to fail UBLK_CMD_END_USER_RECOVERY, otherwise kernel oops can be
triggered.
Fixes: c732a852b419 ("ublk_drv: add START_USER_RECOVERY and END_USER_RECOVERY support")
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20230726144502.566785-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In ublk_ctrl_start_dev(), if wait_for_completion_interruptible() is
interrupted by signal, queues aren't setup successfully yet, so we
have to fail UBLK_CMD_START_DEV, otherwise kernel oops can be triggered.
Reported by German when working on qemu-storage-deamon which requires
single thread ublk daemon.
Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Reported-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230726144502.566785-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a mitigation for the speculative return address stack overflow
vulnerability found on AMD processors.
The mitigation works by ensuring all RET instructions speculate to
a controlled location, similar to how speculation is controlled in the
retpoline sequence. To accomplish this, the __x86_return_thunk forces
the CPU to mispredict every function return using a 'safe return'
sequence.
To ensure the safety of this mitigation, the kernel must ensure that the
safe return sequence is itself free from attacker interference. In Zen3
and Zen4, this is accomplished by creating a BTB alias between the
untraining function srso_untrain_ret_alias() and the safe return
function srso_safe_ret_alias() which results in evicting a potentially
poisoned BTB entry and using that safe one for all function returns.
In older Zen1 and Zen2, this is accomplished using a reinterpretation
technique similar to Retbleed one: srso_untrain_ret() and
srso_safe_ret().
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
A negative number from ret means the host controller had failed to send
usb message and 0 means succeed. Therefore, the if logic is wrong here
and this patch will fix it.
Fixes: f2b42379c576 ("usb: misc: ehset: Rework test mode entry")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20230705095231.457860-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Hardware based on the Bay Trail / BYT SoCs require an external ULPI phy for
USB device-mode. The phy chip usually has its 'reset' and 'chip select'
lines connected to GPIOs described by ACPI fwnodes in the DSDT table.
Because of hardware with missing ACPI resources for the 'reset' and 'chip
select' GPIOs commit 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table
on platforms without ACPI GPIO resources") introduced a fallback
gpiod_lookup_table with hard-coded mappings for Bay Trail devices.
However there are existing Bay Trail based devices, like the National
Instruments cRIO-903x series, where the phy chip has its 'reset' and
'chip-select' lines always asserted in hardware via resistor pull-ups. On
this hardware the phy chip is always enabled and the ACPI dsdt table is
missing information not only for the 'chip-select' and 'reset' lines but
also for the BYT GPIO controller itself "INT33FC".
With the introduction of the gpiod_lookup_table initializing the USB
device-mode on these hardware now errors out. The error comes from the
gpiod_get_optional() calls in dwc3_pci_quirks() which will now return an
-ENOENT error due to the missing ACPI entry for the INT33FC gpio controller
used in the aforementioned table.
This hardware used to work before because gpiod_get_optional() will return
NULL instead of -ENOENT if no GPIO has been assigned to the requested
function. The dwc3_pci_quirks() code for setting the 'cs' and 'reset' GPIOs
was then skipped (due to the NULL return). This is the correct behavior in
cases where the phy chip is hardwired and there are no GPIOs to control.
Since the gpiod_lookup_table relies on the presence of INT33FC fwnode
in ACPI tables only add the table if we know the entry for the INT33FC
gpio controller is present. This allows Bay Trail based devices with
hardwired dwc3 ULPI phys to continue working.
Fixes: 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources")
Cc: stable <stable@kernel.org>
Signed-off-by: Gratian Crisan <gratian.crisan@ni.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230726184555.218091-2-gratian.crisan@ni.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
in be_lancer_xmit_workarounds(), it should go to label 'tx_drop'
if an unexpected value is returned by pskb_trim().
Fixes: 93040ae5cc8d ("be2net: Fix to trim skb for padded vlan packets to workaround an ASIC Bug")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://lore.kernel.org/r/20230725032726.15002-1-ruc_gongyuanjun@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The "exc->key_len" is a u16 that comes from the user. If it's over
IW_ENCODING_TOKEN_MAX (64) that could lead to memory corruption.
Fixes: b121d84882b9 ("staging: ks7010: simplify calls to memcpy()")
Cc: stable <stable@kernel.org>
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/tencent_5153B668C0283CAA15AA518325346E026A09@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Using FBTFT_REGISTER_DRIVER resolves to a NULL struct spi_device_id. This
ultimately causes a warning when the module probes. Fixes it.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Link: https://lore.kernel.org/r/20230718172024.67488-1-rgallaispou@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a check to avoid null pointer dereference as below:
[ 90.002283] general protection fault, probably for non-canonical
address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 90.002292] KASAN: null-ptr-deref in range
[0x0000000000000000-0x0000000000000007]
[ 90.002346] ? exc_general_protection+0x159/0x240
[ 90.002352] ? asm_exc_general_protection+0x26/0x30
[ 90.002357] ? ttm_bo_evict_swapout_allowable+0x322/0x5e0 [ttm]
[ 90.002365] ? ttm_bo_evict_swapout_allowable+0x42e/0x5e0 [ttm]
[ 90.002373] ttm_bo_swapout+0x134/0x7f0 [ttm]
[ 90.002383] ? __pfx_ttm_bo_swapout+0x10/0x10 [ttm]
[ 90.002391] ? lock_acquire+0x44d/0x4f0
[ 90.002398] ? ttm_device_swapout+0xa5/0x260 [ttm]
[ 90.002412] ? lock_acquired+0x355/0xa00
[ 90.002416] ? do_raw_spin_trylock+0xb6/0x190
[ 90.002421] ? __pfx_lock_acquired+0x10/0x10
[ 90.002426] ? ttm_global_swapout+0x25/0x210 [ttm]
[ 90.002442] ttm_device_swapout+0x198/0x260 [ttm]
[ 90.002456] ? __pfx_ttm_device_swapout+0x10/0x10 [ttm]
[ 90.002472] ttm_global_swapout+0x75/0x210 [ttm]
[ 90.002486] ttm_tt_populate+0x187/0x3f0 [ttm]
[ 90.002501] ttm_bo_handle_move_mem+0x437/0x590 [ttm]
[ 90.002517] ttm_bo_validate+0x275/0x430 [ttm]
[ 90.002530] ? __pfx_ttm_bo_validate+0x10/0x10 [ttm]
[ 90.002544] ? kasan_save_stack+0x33/0x60
[ 90.002550] ? kasan_set_track+0x25/0x30
[ 90.002554] ? __kasan_kmalloc+0x8f/0xa0
[ 90.002558] ? amdgpu_gtt_mgr_new+0x81/0x420 [amdgpu]
[ 90.003023] ? ttm_resource_alloc+0xf6/0x220 [ttm]
[ 90.003038] amdgpu_bo_pin_restricted+0x2dd/0x8b0 [amdgpu]
[ 90.003210] ? __x64_sys_ioctl+0x131/0x1a0
[ 90.003210] ? do_syscall_64+0x60/0x90
Fixes: a2848d08742c ("drm/ttm: never consider pinned BOs for eviction&swap")
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20230724024229.1118444-1-guchun.chen@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
In the above mentioned routine, memory is allocated in several places.
If the first succeeds and a later one fails, the routine will leak memory.
This patch fixes commit 2865d42c78a9 ("staging: r8712u: Add the new driver
to the mainline kernel"). A potential memory leak in
r8712_xmit_resource_alloc() is also addressed.
Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Reported-by: syzbot+cf71097ffb6755df8251@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/x/log.txt?x=11ac3fa0a80000
Cc: stable@vger.kernel.org
Cc: Nam Cao <namcaov@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reviewed-by: Nam Cao <namcaov@gmail.com>
Link: https://lore.kernel.org/r/20230714175417.18578-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Several reasons why 'reconfig_mutex' should be held:
1) rdev_for_each() is not safe to be called without the lock, because
rdev can be removed concurrently.
2) mddev_destroy_serial_pool() and mddev_create_serial_pool() should not
be called concurrently.
3) mddev_suspend() from mddev_destroy/create_serial_pool() should be
protected by the lock.
Fixes: 10c92fca636e ("md-bitmap: create and destroy wb_info_pool with the change of backlog")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230706083727.608914-3-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
Local variable is definied first in the beginning of backlog_store(),
there is no need to define it again.
Fixes: 8c13ab115b57 ("md/bitmap: don't set max_write_behind if there is no write mostly device")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230706083727.608914-2-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
