| Age | Commit message (Collapse) | Author |
|---|
|
Commit 2ae6aaf76912 ("md/raid10: fix io loss while replacement replace
rdev") reads replacement first to prevent io loss. However, there are same
issue in wait_blocked_dev() and raid10_handle_discard(), too. Fix it by
using dereference_rdev_and_rrdev() to get devices.
Fixes: d30588b2731f ("md/raid10: improve raid10 discard request")
Fixes: f2e7e269a752 ("md/raid10: pull the code that wait for blocked dev into one function")
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20230701080529.2684932-4-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
Factor out a helper to get 'rdev' and 'replacement' from config->mirrors.
Just to make code cleaner and prepare to fix the bug of io loss while
'replacement' replace 'rdev'.
There is no functional change.
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20230701080529.2684932-3-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
After commit 4ca40c2ce099 ("md/raid10: Allow replacement device to be
replace old drive."), 'rdev' and 'replacement' could appear to be
identical. There are already checks for that in wait_blocked_dev() and
raid10_write_request(). Add check for raid10_handle_discard() now.
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20230701080529.2684932-2-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
wake_up is called unconditionally in a few paths such as make_request(),
which cause lock contention under high concurrency workload like below
raid1_end_write_request
wake_up
__wake_up_common_lock
spin_lock_irqsave
Improve performance by only call wake_up() if waitqueue is not empty
Fio test script:
[global]
name=random reads and writes
ioengine=libaio
direct=1
readwrite=randrw
rwmixread=70
iodepth=64
buffered=0
filename=/dev/md0
size=1G
runtime=30
time_based
randrepeat=0
norandommap
refill_buffers
ramp_time=10
bs=4k
numjobs=400
group_reporting=1
[job1]
Test result with 2 ramdisk in raid1 on a Intel Broadwell 56 cores server.
Before this patch With this patch
READ BW=4621MB/s BW=7337MB/s
WRITE BW=1980MB/s BW=3144MB/s
The patch is inspired by Yu Kuai's change for raid10:
https://lore.kernel.org/r/20230621105728.1268542-1-yukuai1@huaweicloud.com
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230705113227.148494-1-jinpu.wang@ionos.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
memalloc_noio_save() is called for the first mddev_suspend(), and
repeated mddev_suspend() only increase 'suspended'. However,
memalloc_noio_restore() is also called for the first mddev_resume(),
which means that memory reclaim will be enabled before the last
mddev_resume() is called, while the array is still suspended.
Fix this problem by restore 'noio_flag' for the last mddev_resume().
Fixes: 78f57ef9d50a ("md: use memalloc scope APIs in mddev_suspend()/mddev_resume()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230628012931.88911-3-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
Some levels doesn't implement "pers->quiesce", for example
raid0_quiesce() is empty, and now that all levels will drop 'active_io'
until io is done, wait for 'active_io' to be 0 is enough to make sure all
normal io is done, and percpu_ref_kill() for 'active_io' will make sure
no new normal io can be dispatched. There is no need to call
"pers->quiesce" anymore from mddev_suspend().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230628012931.88911-2-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
In fix_read_error(), 'success' will be checked immediately after assigning
it, if it is set to 1 then the loop will break. Checking it again in
condition of loop is redundant. Clean it up.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230623173236.2513554-3-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
We dereference r10_bio->read_slot too many times in fix_read_error().
Optimize it by using a variable to store read_slot.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230623173236.2513554-2-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
New disk should be added to "removed" position first instead of to be a
replacement. Commit 6090368abcb4 ("md/raid10: prioritize adding disk to
'removed' mirror") has fixed this issue for raid10. Fix it for raid1 now.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230627014332.3810102-1-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
use md_account_bio() to enable io accounting, also make sure
mddev_suspend() will wait for all io to be done.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230621165110.1498313-9-yukuai1@huaweicloud.com
|
|
use md_account_bio() to enable io accounting, also make sure
mddev_suspend() will wait for all io to be done.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230621165110.1498313-8-yukuai1@huaweicloud.com
|
|
use md_account_bio() to enable io accounting, also make sure
mddev_suspend() will wait for all io to be done.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230621165110.1498313-7-yukuai1@huaweicloud.com
|
|
Make sure that 'active_io' will represent inflight io instead of io that
is dispatching, and io accounting from all levels will be consistent.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230621165110.1498313-6-yukuai1@huaweicloud.com
|
|
Two problems can be fixed this way:
1) 'active_io' will represent inflight io instead of io that is
dispatching.
2) If io accounting is enabled or disabled while io is still inflight,
bio_start_io_acct() and bio_end_io_acct() is not balanced and io
inflight counter will be leaked.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230621165110.1498313-5-yukuai1@huaweicloud.com
|
|
Io will only be accounted as done from raid5_align_endio() if the io
succeeded, and io inflight counter will be leaked if such io failed.
Fix this problem by switching to use md_account_bio() for io accounting.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230621165110.1498313-4-yukuai1@huaweicloud.com
|
|
Currently, 'active_io' is grabbed before make_reqeust() is called, and
it's dropped immediately make_reqeust() returns. Hence 'active_io'
actually means io is dispatching, not io is inflight.
For raid0 and raid456 that io accounting is enabled, 'active_io' will
also be grabbed when bio is cloned for io accounting, and this 'active_io'
is dropped until io is done.
Always clone new bio so that 'active_io' will mean that io is inflight,
raid1 and raid10 will switch to use this method in later patches.
Now that bio will be cloned even if io accounting is disabled, also
rename related structure from '*_acct_*' to '*_clone_*'.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230621165110.1498313-3-yukuai1@huaweicloud.com
|
|
'io_acct_set' is only used for raid0 and raid456, prepare to use it for
raid1 and raid10, so that io accounting from different levels can be
consistent.
By the way, follow up patches will also use this io clone mechanism to
make sure 'active_io' represents in flight io, not io that is dispatching,
so that mddev_suspend will wait for io to be done as designed.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230621165110.1498313-2-yukuai1@huaweicloud.com
|
|
The support for bitmaps on files is a very bad idea abusing various kernel
APIs, and fundamentally requires the file to not be on the actual array
without a way to check that this is actually the case. Add a deprecation
warning to see if we might be able to eventually drop it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-12-hch@lst.de
|
|
The support for write intent bitmaps in files on an external files in md
is a hot mess that abuses ->bmap to map file offsets into physical device
objects, and also abuses buffer_heads in a creative way.
Make this code optional so that MD can be built into future kernels
without buffer_head support, and so that we can eventually deprecate it.
Note this does not affect the internal bitmap support, which has none of
the problems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-11-hch@lst.de
|
|
The md driver allocates pages for storing the bitmap file data, which
are not page cache pages, and then stores the page granularity file
offset in page->index, which is a field that isn't really valid except
for page cache pages.
Use a separate index for the superblock, and use the scheme used at
read size to recalculate the index for the bitmap pages instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-10-hch@lst.de
|
|
Diretly apply mddev->bitmap_info.offset to the sector number to read
instead of doing that in both callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-9-hch@lst.de
|
|
Convert read_sb_page to the normal kernel coding style, calculate the
target sector only once, and add a local iosize variable to make the call
to sync_page_io more readable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-8-hch@lst.de
|
|
Split the confusing loop in md_bitmap_init_from_disk that iterates over
all chunks but also needs to read and map the pages into three separate
loops: one that iterates over the pages to read them, a second optional
one to iterate over the pages to mark them invalid if the bitmaps are
out of date, and a final one that actually iterates over the chunks.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306160552.smw0qbmb-lkp@intel.com/
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-7-hch@lst.de
|
|
Make the difference to read_sb_page clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-6-hch@lst.de
|
|
Split the file write code out of write_page into a separate helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-5-hch@lst.de
|
|
Don't bother allocating an extra buffer in the I/O failure handler and
instead use the printk built-in format to print the last 4 path name
components.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-4-hch@lst.de
|
|
Just a small tidyup to prepare for bigger changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-3-hch@lst.de
|
|
Set BITMAP_WRITE_ERROR directly in write_sb_page instead of propagating
the error to the caller and setting it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230615064840.629492-2-hch@lst.de
|
|
For md_check_recovery():
1) if 'MD_RECOVERY_RUNING' is not set, register new sync_thread.
2) if 'MD_RECOVERY_RUNING' is set:
a) if 'MD_RECOVERY_DONE' is not set, don't do anything, wait for
md_do_sync() to be done.
b) if 'MD_RECOVERY_DONE' is set, unregister sync_thread. Current code
expects that sync_thread is not NULL, otherwise new sync_thread will
be registered, which will corrupt the array.
Make sure md_check_recovery() won't register new sync_thread if
'MD_RECOVERY_RUNING' is still set, and a new WARN_ON_ONCE() is added for
the above corruption,
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529132037.2124527-7-yukuai1@huaweicloud.com
|
|
md_reap_sync_thread() is just replaced with wait_event(resync_wait, ...)
from action_store(), just make sure action_store() will still wait for
everything to be done in md_reap_sync_thread().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewd-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529132037.2124527-6-yukuai1@huaweicloud.com
|
|
Our test found a following deadlock in raid10:
1) Issue a normal write, and such write failed:
raid10_end_write_request
set_bit(R10BIO_WriteError, &r10_bio->state)
one_write_done
reschedule_retry
// later from md thread
raid10d
handle_write_completed
list_add(&r10_bio->retry_list, &conf->bio_end_io_list)
// later from md thread
raid10d
if (!test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags))
list_move(conf->bio_end_io_list.prev, &tmp)
r10_bio = list_first_entry(&tmp, struct r10bio, retry_list)
raid_end_bio_io(r10_bio)
Dependency chain 1: normal io is waiting for updating superblock
2) Trigger a recovery:
raid10_sync_request
raise_barrier
Dependency chain 2: sync thread is waiting for normal io
3) echo idle/frozen to sync_action:
action_store
mddev_lock
md_unregister_thread
kthread_stop
Dependency chain 3: drop 'reconfig_mutex' is waiting for sync thread
4) md thread can't update superblock:
raid10d
md_check_recovery
if (mddev_trylock(mddev))
md_update_sb
Dependency chain 4: update superblock is waiting for 'reconfig_mutex'
Hence cyclic dependency exist, in order to fix the problem, we must
break one of them. Dependency 1 and 2 can't be broken because they are
foundation design. Dependency 4 may be possible if it can be guaranteed
that no io can be inflight, however, this requires a new mechanism which
seems complex. Dependency 3 is a good choice, because idle/frozen only
requires sync thread to finish, which can be done asynchronously that is
already implemented, and 'reconfig_mutex' is not needed anymore.
This patch switch 'idle' and 'frozen' to wait sync thread to be done
asynchronously, and this patch also add a sequence counter to record how
many times sync thread is done, so that 'idle' won't keep waiting on new
started sync thread.
Noted that raid456 has similiar deadlock([1]), and it's verified[2] this
deadlock can be fixed by this patch as well.
[1] https://lore.kernel.org/linux-raid/5ed54ffc-ce82-bf66-4eff-390cb23bc1ac@molgen.mpg.de/T/#t
[2] https://lore.kernel.org/linux-raid/e9067438-d713-f5f3-0d3d-9e6b0e9efa0e@huaweicloud.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529132037.2124527-5-yukuai1@huaweicloud.com
|
|
Currently, for idle and frozen, action_store will hold 'reconfig_mutex'
and call md_reap_sync_thread() to stop sync thread, however, this will
cause deadlock (explained in the next patch). In order to fix the
problem, following patch will release 'reconfig_mutex' and wait on
'resync_wait', like md_set_readonly() and do_md_stop() does.
Consider that action_store() will set/clear 'MD_RECOVERY_FROZEN'
unconditionally, which might cause unexpected problems, for example,
frozen just set 'MD_RECOVERY_FROZEN' and is still in progress, while
'idle' clear 'MD_RECOVERY_FROZEN' and new sync thread is started, which
might starve in progress frozen. A mutex is added to synchronize idle
and frozen from action_store().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529132037.2124527-4-yukuai1@huaweicloud.com
|
|
Prepare to handle 'idle' and 'frozen' differently to fix a deadlock, there
are no functional changes except that MD_RECOVERY_RUNNING is checked
again after 'reconfig_mutex' is held.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529132037.2124527-3-yukuai1@huaweicloud.com
|
|
This reverts commit 9dfbdafda3b34e262e43e786077bab8e476a89d1.
Because it will introduce a defect that sync_thread can be running while
MD_RECOVERY_RUNNING is cleared, which will cause some unexpected problems,
for example:
list_add corruption. prev->next should be next (ffff0001ac1daba0), but was ffff0000ce1a02a0. (prev=ffff0000ce1a02a0).
Call trace:
__list_add_valid+0xfc/0x140
insert_work+0x78/0x1a0
__queue_work+0x500/0xcf4
queue_work_on+0xe8/0x12c
md_check_recovery+0xa34/0xf30
raid10d+0xb8/0x900 [raid10]
md_thread+0x16c/0x2cc
kthread+0x1a4/0x1ec
ret_from_fork+0x10/0x18
This is because work is requeued while it's still inside workqueue:
t1: t2:
action_store
mddev_lock
if (mddev->sync_thread)
mddev_unlock
md_unregister_thread
// first sync_thread is done
md_check_recovery
mddev_try_lock
/*
* once MD_RECOVERY_DONE is set, new sync_thread
* can start.
*/
set_bit(MD_RECOVERY_RUNNING, &mddev->recovery)
INIT_WORK(&mddev->del_work, md_start_sync)
queue_work(md_misc_wq, &mddev->del_work)
test_and_set_bit(WORK_STRUCT_PENDING_BIT, ...)
// set pending bit
insert_work
list_add_tail
mddev_unlock
mddev_lock_nointr
md_reap_sync_thread
// MD_RECOVERY_RUNNING is cleared
mddev_unlock
t3:
// before queued work started from t2
md_check_recovery
// MD_RECOVERY_RUNNING is not set, a new sync_thread can be started
INIT_WORK(&mddev->del_work, md_start_sync)
work->data = 0
// work pending bit is cleared
queue_work(md_misc_wq, &mddev->del_work)
insert_work
list_add_tail
// list is corrupted
The above commit is reverted to fix the problem, the deadlock this
commit tries to fix will be fixed in following patches.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529132037.2124527-2-yukuai1@huaweicloud.com
|
|
When a grant entry is still in use by the remote domain, Linux must put
it on a deferred list. Normally, this list is very short, because
the PV network and block protocols expect the backend to unmap the grant
first. However, Qubes OS's GUI protocol is subject to the constraints
of the X Window System, and as such winds up with the frontend unmapping
the window first. As a result, the list can grow very large, resulting
in a massive memory leak and eventual VM freeze.
To partially solve this problem, make the number of entries that the VM
will attempt to free at each iteration tunable. The default is still
10, but it can be overridden via a module parameter.
This is Cc: stable because (when combined with appropriate userspace
changes) it fixes a severe performance and stability problem for Qubes
OS users.
Cc: stable@vger.kernel.org
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230726165354.1252-1-demi@invisiblethingslab.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
A race were found where set_channels could be called after registering
but before virtnet_set_queues() in virtnet_probe(). Fixing this by
moving the virtnet_set_queues() before netdevice registering. While at
it, use _virtnet_set_queues() to avoid holding rtnl as the device is
not even registered at that time.
Cc: stable@vger.kernel.org
Fixes: a220871be66f ("virtio-net: correctly enable multiqueue")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230725072049.617289-1-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the clarification [1] in the latest napi.rst, the tx
processing cannot call any XDP (or page pool) APIs if the "budget"
is 0. Because NAPI is called with the budget of 0 (such as netpoll)
indicates we may be in an IRQ context, however, we cannot use the
page pool from IRQ context.
[1] https://lore.kernel.org/all/20230720161323.2025379-1-kuba@kernel.org/
Fixes: 20f797399035 ("net: fec: recycle pages for transmitted XDP frames")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230725074148.2936402-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pmbus_regulator_get_status() acquires update_lock.
pmbus_regulator_get_error_flags() acquires it again, resulting in an
immediate deadlock.
Call _pmbus_get_flags() from pmbus_regulator_get_status() directly
to avoid the problem.
Reported-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Closes: https://lore.kernel.org/linux-hwmon/b7a3ad85-aab4-4718-a001-1d8b1c0eef36@roeck-us.net/T/#u
Cc: Naresh Solanki <Naresh.Solanki@9elements.com>
Cc: stable@vger.kernel.org # v6.2+
Fixes: c05f477c4ba3 ("hwmon: (pmbus/core) Implement regulator get_status")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Currently, in case an interface is down, mlx5 driver doesn't
unregister its devlink params, which leads to this WARN[1].
Fix it by unregistering devlink params in that case as well.
[1]
[ 295.244769 ] WARNING: CPU: 15 PID: 1 at net/core/devlink.c:9042 devlink_free+0x174/0x1fc
[ 295.488379 ] CPU: 15 PID: 1 Comm: shutdown Tainted: G S OE 5.15.0-1017.19.3.g0677e61-bluefield #g0677e61
[ 295.509330 ] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS 4.2.0.12761 Jun 6 2023
[ 295.543096 ] pc : devlink_free+0x174/0x1fc
[ 295.551104 ] lr : mlx5_devlink_free+0x18/0x2c [mlx5_core]
[ 295.561816 ] sp : ffff80000809b850
[ 295.711155 ] Call trace:
[ 295.716030 ] devlink_free+0x174/0x1fc
[ 295.723346 ] mlx5_devlink_free+0x18/0x2c [mlx5_core]
[ 295.733351 ] mlx5_sf_dev_remove+0x98/0xb0 [mlx5_core]
[ 295.743534 ] auxiliary_bus_remove+0x2c/0x50
[ 295.751893 ] __device_release_driver+0x19c/0x280
[ 295.761120 ] device_release_driver+0x34/0x50
[ 295.769649 ] bus_remove_device+0xdc/0x170
[ 295.777656 ] device_del+0x17c/0x3a4
[ 295.784620 ] mlx5_sf_dev_remove+0x28/0xf0 [mlx5_core]
[ 295.794800 ] mlx5_sf_dev_table_destroy+0x98/0x110 [mlx5_core]
[ 295.806375 ] mlx5_unload+0x34/0xd0 [mlx5_core]
[ 295.815339 ] mlx5_unload_one+0x70/0xe4 [mlx5_core]
[ 295.824998 ] shutdown+0xb0/0xd8 [mlx5_core]
[ 295.833439 ] pci_device_shutdown+0x3c/0xa0
[ 295.841651 ] device_shutdown+0x170/0x340
[ 295.849486 ] __do_sys_reboot+0x1f4/0x2a0
[ 295.857322 ] __arm64_sys_reboot+0x2c/0x40
[ 295.865329 ] invoke_syscall+0x78/0x100
[ 295.872817 ] el0_svc_common.constprop.0+0x54/0x184
[ 295.882392 ] do_el0_svc+0x30/0xac
[ 295.889008 ] el0_svc+0x48/0x160
[ 295.895278 ] el0t_64_sync_handler+0xa4/0x130
[ 295.903807 ] el0t_64_sync+0x1a4/0x1a8
[ 295.911120 ] ---[ end trace 4f1d2381d00d9dce ]---
Fixes: fe578cbb2f05 ("net/mlx5: Move devlink registration before mlx5_load")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The offending patch is based on the assumption that for PFs,
mlx5_get_dev_index() is the same as vhca_id. However, this assumption
is wrong in case of DPU (ECPF).
Fix it by using vhca_id directly, and switch the array of peers to
xarray.
Fixes: 6d5b7321d8af ("net/mlx5: DR, handle more than one peer domain")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited commit sets ft prio to fs_base_prio. But if
ignore_flow_level it not supported, ft prio must be set based on
tc filter prio. Otherwise, all the ft prio are the same on the same
chain. It is invalid if ignore_flow_level is not supported.
Fix it by setting ft prio based on tc filter prio and setting
fs_base_prio to 0 for fdb.
Fixes: 8e80e5648092 ("net/mlx5: fs_chains: Refactor to detach chains from tc usage")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
There are DEK objects cached in DEK pool after kTLS is used, and they
are freed only in mlx5e_ktls_cleanup().
mlx5e_destroy_mdev_resources() is called in mlx5e_suspend() to
free mdev resources, including protection domain (PD). However, PD is
still referenced by the cached DEK objects in this case, because
profile->cleanup() (and therefore mlx5e_ktls_cleanup()) is called
after mlx5e_suspend() during devlink reload. So the following FW
syndrome is generated:
mlx5_cmd_out_err:803:(pid 12948): DEALLOC_PD(0x801) op_mod(0x0) failed,
status bad resource state(0x9), syndrome (0xef0c8a), err(-22)
To avoid this syndrome, move DEK pool destruction to
mlx5e_ktls_cleanup_tx(), which is called by profile->cleanup_tx(). And
move pool creation to mlx5e_ktls_init_tx() for symmetry.
Fixes: f741db1a5171 ("net/mlx5e: kTLS, Improve connection rate by using fast update encryption key")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
As suggested during code review set the access rights for bridge 'fdb'
debugfs file to root-only.
Fixes: 791eb78285e8 ("net/mlx5: Bridge, expose FDB state via debugfs")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/netdev/20230619120515.5045132a@kernel.org/
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When the regular rq is reactivated after the XSK socket is closed
it could be reading stale cqes which eventually corrupts the rq.
This leads to no more traffic being received on the regular rq and a
crash on the next close or deactivation of the rq.
Kal Cuttler Conely reported this issue as a crash on the release
path when the xdpsock sample program is stopped (killed) and restarted
in sequence while traffic is running.
This patch flushes all cqes when during the rq flush. The cqe flushing
is done in the reset state of the rq. mlx5e_rq_to_ready code is moved
into the flush function to allow for this.
Fixes: 082a9edf12fe ("net/mlx5e: xsk: Flush RQ on XSK activation to save memory")
Reported-by: Kal Cutter Conley <kal.conley@dectris.com>
Closes: https://lore.kernel.org/xdp-newbies/CAHApi-nUAs4TeFWUDV915CZJo07XVg2Vp63-no7UDfj6wur9nQ@mail.gmail.com
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The below crash can be encountered when using xdpsock in rx mode for
legacy rq: the buffer gets released in the XDP_REDIRECT path, and then
once again in the driver. This fix sets the flag to avoid releasing on
the driver side.
XSK handling of buffers for legacy rq was relying on the caller to set
the skip release flag. But the referenced fix started using fragment
counts for pages instead of the skip flag.
Crash log:
general protection fault, probably for non-canonical address 0xffff8881217e3a: 0000 [#1] SMP
CPU: 0 PID: 14 Comm: ksoftirqd/0 Not tainted 6.5.0-rc1+ #31
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:bpf_prog_03b13f331978c78c+0xf/0x28
Code: ...
RSP: 0018:ffff88810082fc98 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888138404901 RCX: c0ffffc900027cbc
RDX: ffffffffa000b514 RSI: 00ffff8881217e32 RDI: ffff888138404901
RBP: ffff88810082fc98 R08: 0000000000091100 R09: 0000000000000006
R10: 0000000000000800 R11: 0000000000000800 R12: ffffc9000027a000
R13: ffff8881217e2dc0 R14: ffff8881217e2910 R15: ffff8881217e2f00
FS: 0000000000000000(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000564cb2e2cde0 CR3: 000000010e603004 CR4: 0000000000370eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? die_addr+0x32/0x80
? exc_general_protection+0x192/0x390
? asm_exc_general_protection+0x22/0x30
? 0xffffffffa000b514
? bpf_prog_03b13f331978c78c+0xf/0x28
mlx5e_xdp_handle+0x48/0x670 [mlx5_core]
? dev_gro_receive+0x3b5/0x6e0
mlx5e_xsk_skb_from_cqe_linear+0x6e/0x90 [mlx5_core]
mlx5e_handle_rx_cqe+0x55/0x100 [mlx5_core]
mlx5e_poll_rx_cq+0x87/0x6e0 [mlx5_core]
mlx5e_napi_poll+0x45e/0x6b0 [mlx5_core]
__napi_poll+0x25/0x1a0
net_rx_action+0x28a/0x300
__do_softirq+0xcd/0x279
? sort_range+0x20/0x20
run_ksoftirqd+0x1a/0x20
smpboot_thread_fn+0xa2/0x130
kthread+0xc9/0xf0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Modules linked in: mlx5_ib mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay zram zsmalloc fuse [last unloaded: mlx5_core]
---[ end trace 0000000000000000 ]---
Fixes: 7abd955a58fb ("net/mlx5e: RX, Fix page_pool page fragment tracking for XDP")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
For IP tunnel encapsulation in ECMP (Equal-Cost Multipath) mode, as
the flow is duplicated to the peer eswitch, the related neighbour
information on the peer uplink representor is created as well.
In the cited commit, eswitch devcom unpair is moved to uplink unload
API, specifically the profile->cleanup_tx. If there is a encap rule
offloaded in ECMP mode, when one eswitch does unpair (because of
unloading the driver, for instance), and the peer rule from the peer
eswitch is going to be deleted, the use-after-free error is triggered
while accessing neigh info, as it is already cleaned up in uplink's
profile->disable, which is before its profile->cleanup_tx.
To fix this issue, move the neigh cleanup to profile's cleanup_tx
callback, and after mlx5e_cleanup_uplink_rep_tx is called. The neigh
init is moved to init_tx for symmeter.
[ 2453.376299] BUG: KASAN: slab-use-after-free in mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.379125] Read of size 4 at addr ffff888127af9008 by task modprobe/2496
[ 2453.381542] CPU: 7 PID: 2496 Comm: modprobe Tainted: G B 6.4.0-rc7+ #15
[ 2453.383386] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 2453.384335] Call Trace:
[ 2453.384625] <TASK>
[ 2453.384891] dump_stack_lvl+0x33/0x50
[ 2453.385285] print_report+0xc2/0x610
[ 2453.385667] ? __virt_addr_valid+0xb1/0x130
[ 2453.386091] ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.386757] kasan_report+0xae/0xe0
[ 2453.387123] ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.387798] mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core]
[ 2453.388465] mlx5e_rep_encap_entry_detach+0xa6/0xe0 [mlx5_core]
[ 2453.389111] mlx5e_encap_dealloc+0xa7/0x100 [mlx5_core]
[ 2453.389706] mlx5e_tc_tun_encap_dests_unset+0x61/0xb0 [mlx5_core]
[ 2453.390361] mlx5_free_flow_attr_actions+0x11e/0x340 [mlx5_core]
[ 2453.391015] ? complete_all+0x43/0xd0
[ 2453.391398] ? free_flow_post_acts+0x38/0x120 [mlx5_core]
[ 2453.392004] mlx5e_tc_del_fdb_flow+0x4ae/0x690 [mlx5_core]
[ 2453.392618] mlx5e_tc_del_fdb_peers_flow+0x308/0x370 [mlx5_core]
[ 2453.393276] mlx5e_tc_clean_fdb_peer_flows+0xf5/0x140 [mlx5_core]
[ 2453.393925] mlx5_esw_offloads_unpair+0x86/0x540 [mlx5_core]
[ 2453.394546] ? mlx5_esw_offloads_set_ns_peer.isra.0+0x180/0x180 [mlx5_core]
[ 2453.395268] ? down_write+0xaa/0x100
[ 2453.395652] mlx5_esw_offloads_devcom_event+0x203/0x530 [mlx5_core]
[ 2453.396317] mlx5_devcom_send_event+0xbb/0x190 [mlx5_core]
[ 2453.396917] mlx5_esw_offloads_devcom_cleanup+0xb0/0xd0 [mlx5_core]
[ 2453.397582] mlx5e_tc_esw_cleanup+0x42/0x120 [mlx5_core]
[ 2453.398182] mlx5e_rep_tc_cleanup+0x15/0x30 [mlx5_core]
[ 2453.398768] mlx5e_cleanup_rep_tx+0x6c/0x80 [mlx5_core]
[ 2453.399367] mlx5e_detach_netdev+0xee/0x120 [mlx5_core]
[ 2453.399957] mlx5e_netdev_change_profile+0x84/0x170 [mlx5_core]
[ 2453.400598] mlx5e_vport_rep_unload+0xe0/0xf0 [mlx5_core]
[ 2453.403781] mlx5_eswitch_unregister_vport_reps+0x15e/0x190 [mlx5_core]
[ 2453.404479] ? mlx5_eswitch_register_vport_reps+0x200/0x200 [mlx5_core]
[ 2453.405170] ? up_write+0x39/0x60
[ 2453.405529] ? kernfs_remove_by_name_ns+0xb7/0xe0
[ 2453.405985] auxiliary_bus_remove+0x2e/0x40
[ 2453.406405] device_release_driver_internal+0x243/0x2d0
[ 2453.406900] ? kobject_put+0x42/0x2d0
[ 2453.407284] bus_remove_device+0x128/0x1d0
[ 2453.407687] device_del+0x240/0x550
[ 2453.408053] ? waiting_for_supplier_show+0xe0/0xe0
[ 2453.408511] ? kobject_put+0xfa/0x2d0
[ 2453.408889] ? __kmem_cache_free+0x14d/0x280
[ 2453.409310] mlx5_rescan_drivers_locked.part.0+0xcd/0x2b0 [mlx5_core]
[ 2453.409973] mlx5_unregister_device+0x40/0x50 [mlx5_core]
[ 2453.410561] mlx5_uninit_one+0x3d/0x110 [mlx5_core]
[ 2453.411111] remove_one+0x89/0x130 [mlx5_core]
[ 2453.411628] pci_device_remove+0x59/0xf0
[ 2453.412026] device_release_driver_internal+0x243/0x2d0
[ 2453.412511] ? parse_option_str+0x14/0x90
[ 2453.412915] driver_detach+0x7b/0xf0
[ 2453.413289] bus_remove_driver+0xb5/0x160
[ 2453.413685] pci_unregister_driver+0x3f/0xf0
[ 2453.414104] mlx5_cleanup+0xc/0x20 [mlx5_core]
Fixes: 2be5bd42a5bb ("net/mlx5: Handle pairing of E-switch via uplink un/load APIs")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Moving to switchdev mode with ntuple offload on causes the kernel to
crash since fs->arfs is freed during nic profile cleanup flow.
Ntuple offload is not supported in switchdev mode and it is already
unset by mlx5 fix feature ndo in switchdev mode. Verify fs->arfs is
valid before disabling it.
trace:
[] RIP: 0010:_raw_spin_lock_bh+0x17/0x30
[] arfs_del_rules+0x44/0x1a0 [mlx5_core]
[] mlx5e_arfs_disable+0xe/0x20 [mlx5_core]
[] mlx5e_handle_feature+0x3d/0xb0 [mlx5_core]
[] ? __rtnl_unlock+0x25/0x50
[] mlx5e_set_features+0xfe/0x160 [mlx5_core]
[] __netdev_update_features+0x278/0xa50
[] ? netdev_run_todo+0x5e/0x2a0
[] netdev_update_features+0x22/0x70
[] ? _cond_resched+0x15/0x30
[] mlx5e_attach_netdev+0x12a/0x1e0 [mlx5_core]
[] mlx5e_netdev_attach_profile+0xa1/0xc0 [mlx5_core]
[] mlx5e_netdev_change_profile+0x77/0xe0 [mlx5_core]
[] mlx5e_vport_rep_load+0x1ed/0x290 [mlx5_core]
[] mlx5_esw_offloads_rep_load+0x88/0xd0 [mlx5_core]
[] esw_offloads_load_rep.part.38+0x31/0x50 [mlx5_core]
[] esw_offloads_enable+0x6c5/0x710 [mlx5_core]
[] mlx5_eswitch_enable_locked+0x1bb/0x290 [mlx5_core]
[] mlx5_devlink_eswitch_mode_set+0x14f/0x320 [mlx5_core]
[] devlink_nl_cmd_eswitch_set_doit+0x94/0x120
[] genl_family_rcv_msg_doit.isra.17+0x113/0x150
[] genl_family_rcv_msg+0xb7/0x170
[] ? devlink_nl_cmd_port_split_doit+0x100/0x100
[] genl_rcv_msg+0x47/0xa0
[] ? genl_family_rcv_msg+0x170/0x170
[] netlink_rcv_skb+0x4c/0x130
[] genl_rcv+0x24/0x40
[] netlink_unicast+0x19a/0x230
[] netlink_sendmsg+0x204/0x3d0
[] sock_sendmsg+0x50/0x60
Fixes: 90b22b9bcd24 ("net/mlx5e: Disable Rx ntuple offload for uplink representor")
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited commit holds encap tbl lock unconditionally when setting
up dests. But it may cause the following deadlock:
PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8"
#0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91
#1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb
#2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528
#3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb
#4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb
#5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core]
#6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core]
#7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core]
#8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core]
#9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core]
#10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core]
#11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core]
#12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core]
#13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8
#14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower]
#15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower]
#16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0
[1031218.028143] wait_for_completion+0x24/0x30
[1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core]
[1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core]
[1031218.029885] process_one_work+0x24e/0x510
Actually no need to hold encap tbl lock if there is no encap action.
Fix it by checking if encap action exists or not before holding
encap tbl lock.
Fixes: 37c3b9fa7ccf ("net/mlx5e: Prevent encap offload when neigh update is running")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, whenever a user is setting migratable port fn attr, the
driver is always turn migratable capability on.
Fix it by honor the user input
Fixes: e5b9642a33be ("net/mlx5: E-Switch, Implement devlink port function cmds to control migratable")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
mlx5e_ipsec_remove_trailer() should return an error code if function
pskb_trim() returns an unexpected value.
Fixes: 2ac9cfe78223 ("net/mlx5e: IPSec, Add Innova IPSec offload TX data path")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
