summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-10-30drm/radeon: Fix EEH during kexecKyle Mahlkuch
During kexec some adapters hit an EEH since they are not properly shut down in the radeon_pci_shutdown() function. Adding radeon_suspend_kms() fixes this issue. Enabled only on PPC because this patch causes issues on some other boards. Signed-off-by: Kyle Mahlkuch <kmahlkuc@linux.vnet.ibm.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-30drm/amdgpu/gmc10: properly set BANK_SELECT and FRAGMENT_SIZEAlex Deucher
These were not aligned for optimal performance for GPUVM. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Tianci Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-10-30drm/amdgpu/powerplay/vega10: allow undervolting in p7Pelle van Gils
The vega10_odn_update_soc_table() function does not allow the SCLK dependent voltage to be set for power-state 7 to a value below the default in pptable. Change the for-loop condition to allow undervolting in the highest state. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205277 Signed-off-by: Pelle van Gils <pelle@vangils.xyz> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-10-30dc.c:use kzalloc without testzhongshiqi
dc.c:583:null check is needed after using kzalloc function Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: zhongshiqi <zhong.shiqi@zte.com.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-30drm/amd/display: setting the DIG_MODE to the correct value.Zhan liu
[Why] This patch is for fixing Navi14 HDMI display pink screen issue. [How] Call stream->link->link_enc->funcs->setup twice. This is setting the DIG_MODE to the correct value after having been overridden by the call to transmitter control. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-30drm/amd/display: Passive DP->HDMI dongle detection fixMichael Strauss
[WHY] i2c_read is called to differentiate passive DP->HDMI and DP->DVI-D dongles The call is expected to fail in DVI-D case but pass in HDMI case Some HDMI dongles have a chance to fail as well, causing misdetection as DVI-D [HOW] Retry i2c_read to ensure failed result is valid Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-30drm/amd/display: add 50us buffer as WA for pstate switch in activeJun Lei
Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-30drm/amd/display: Allow inverted gammaAidan Yang
[why] There's a use case for inverted gamma and it's been confirmed that negative slopes are ok. [how] Remove code for blocking non-monotonically increasing gamma Signed-off-by: Aidan Yang <Aidan.Yang@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Reza Amini <Reza.Amini@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-30drm/amd/display: do not synchronize "drr" displaysJun Lei
[why] A display that supports DRR can never really be considered "synchronized" with any other display because we can dynamically enable DRR (i.e. without modeset). this will cause their relative CRTC positions to drift and lose sync. this will disrupt features such as MCLK switching that assume and depend on their permanent alignment (that can only change with modeset) [how] check for ignore_msa in stream when considered synchronizability this ignore_msa is basically actually implemented as "supports drr" Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-30drm/amdgpu: If amdgpu_ib_schedule fails return back the error.Andrey Grodzovsky
Use ERR_PTR to return back the error happened during amdgpu_ib_schedule. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-30drm/sched: Set error to s_fence if HW job submission failed.Andrey Grodzovsky
Problem: When run_job fails and HW fence returned is NULL we still signal the s_fence to avoid hangs but the user has no way of knowing if the actual HW job was ran and finished. Fix: Allow .run_job implementations to return ERR_PTR in the fence pointer returned and then set this error for s_fence->finished fence so whoever wait on this fence can inspect the signaled fence for an error. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-30drm/amdgpu/gfx10: update gfx golden settings for navi12Tianci.Yin
update registers: mmCGTT_SPI_CLK_CTRL Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-30drm/amdgpu/gfx10: update gfx golden settings for navi14Tianci.Yin
update registers: mmCGTT_SPI_CLK_CTRL Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-30drm/amdgpu/gfx10: update gfx golden settingsTianci.Yin
update registers: mmCGTT_SPI_CLK_CTRL Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-10-30drm/amd/display: Change Navi14's DWB flag to 1Zhan liu
[Why] DWB (Display Writeback) flag needs to be enabled as 1, or system will throw out a few warnings when creating dcn20 resource pool. Also, Navi14's dwb setting needs to match Navi10's, which has already been set to 1. [How] Change value of num_dwb from 0 to 1. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-30drm/amdgpu/sdma5: do not execute 0-sized IBs (v2)Pierre-Eric Pelloux-Prayer
This seems to help with https://bugs.freedesktop.org/show_bug.cgi?id=111481. v2: insert a NOP instead of skipping all 0-sized IBs to avoid breaking older hw Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-30drm/amdgpu: Fix SDMA hang when performing VKexample testchen gong
VKexample test hang during Occlusion/SDMA/Varia runs. Clear XNACK_WATERMK in reg SDMA0_UTCL1_WATERMK to fix this issue. Signed-off-by: chen gong <curry.gong@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-10-30iwlwifi: fw api: support new API for scan config cmdAyala Beker
The API was reduced to include only knowledge currently needed by the FW scan logic, the rest is legacy. Support the new, reduced version. Using the old API with newer firmwares (starting from iwlwifi-*-50.ucode, which implements and requires the new API version) causes an assertion failure similar to this one: [ 2.854505] iwlwifi 0000:00:14.3: 0x20000038 | BAD_COMMAND Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-30mt76: dma: fix buffer unmap with non-linear skbsLorenzo Bianconi
mt76 dma layer is supposed to unmap skb data buffers while keep txwi mapped on hw dma ring. At the moment mt76 wrongly unmap txwi or does not unmap data fragments in even positions for non-linear skbs. This issue may result in hw hangs with A-MSDU if the system relies on IOMMU or SWIOTLB. Fix this behaviour properly unmapping data fragments on non-linear skbs. Fixes: 17f1de56df05 ("mt76: add common code shared between multiple chipsets") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-30mt76: mt76x2e: disable pcie_aspm by defaultLorenzo Bianconi
On same device (e.g. U7612E-H1) PCIE_ASPM causes continuous mcu hangs and instability. Since mt76x2 series does not manage PCIE PS states, first we try to disable ASPM using pci_disable_link_state. If it fails, we will disable PCIE PS configuring PCI registers. This patch has been successfully tested on U7612E-H1 mini-pice card Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-30Merge tag 'iommu-fixes-v5.4-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Follow-on fix for Renesas IPMMU to get rid of a redundant error message. - Quirk for AMD IOMMU to make it work on another Acer Laptop model with a broken IVRS ACPI table. - Fix for a panic at kdump in the Intel IOMMU driver. * tag 'iommu-fixes-v5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Fix panic after kexec -p for kdump iommu/amd: Apply the same IVRS IOAPIC workaround to Acer Aspire A315-41 iommu/ipmmu-vmsa: Remove dev_err() on platform_get_irq() failure
2019-10-30iommu/vt-d: Fix panic after kexec -p for kdumpJohn Donnelly
This cures a panic on restart after a kexec operation on 5.3 and 5.4 kernels. The underlying state of the iommu registers (iommu->flags & VTD_FLAG_TRANS_PRE_ENABLED) on a restart results in a domain being marked as "DEFER_DEVICE_DOMAIN_INFO" that produces an Oops in identity_mapping(). [ 43.654737] BUG: kernel NULL pointer dereference, address: 0000000000000056 [ 43.655720] #PF: supervisor read access in kernel mode [ 43.655720] #PF: error_code(0x0000) - not-present page [ 43.655720] PGD 0 P4D 0 [ 43.655720] Oops: 0000 [#1] SMP PTI [ 43.655720] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.3.2-1940.el8uek.x86_64 #1 [ 43.655720] Hardware name: Oracle Corporation ORACLE SERVER X5-2/ASM,MOTHERBOARD,1U, BIOS 30140300 09/20/2018 [ 43.655720] RIP: 0010:iommu_need_mapping+0x29/0xd0 [ 43.655720] Code: 00 0f 1f 44 00 00 48 8b 97 70 02 00 00 48 83 fa ff 74 53 48 8d 4a ff b8 01 00 00 00 48 83 f9 fd 76 01 c3 48 8b 35 7f 58 e0 01 <48> 39 72 58 75 f2 55 48 89 e5 41 54 53 48 8b 87 28 02 00 00 4c 8b [ 43.655720] RSP: 0018:ffffc9000001b9b0 EFLAGS: 00010246 [ 43.655720] RAX: 0000000000000001 RBX: 0000000000001000 RCX: fffffffffffffffd [ 43.655720] RDX: fffffffffffffffe RSI: ffff8880719b8000 RDI: ffff8880477460b0 [ 43.655720] RBP: ffffc9000001b9e8 R08: 0000000000000000 R09: ffff888047c01700 [ 43.655720] R10: 00002194036fc692 R11: 0000000000000000 R12: 0000000000000000 [ 43.655720] R13: ffff8880477460b0 R14: 0000000000000cc0 R15: ffff888072d2b558 [ 43.655720] FS: 0000000000000000(0000) GS:ffff888071c00000(0000) knlGS:0000000000000000 [ 43.655720] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 43.655720] CR2: 0000000000000056 CR3: 000000007440a002 CR4: 00000000001606b0 [ 43.655720] Call Trace: [ 43.655720] ? intel_alloc_coherent+0x2a/0x180 [ 43.655720] ? __schedule+0x2c2/0x650 [ 43.655720] dma_alloc_attrs+0x8c/0xd0 [ 43.655720] dma_pool_alloc+0xdf/0x200 [ 43.655720] ehci_qh_alloc+0x58/0x130 [ 43.655720] ehci_setup+0x287/0x7ba [ 43.655720] ? _dev_info+0x6c/0x83 [ 43.655720] ehci_pci_setup+0x91/0x436 [ 43.655720] usb_add_hcd.cold.48+0x1d4/0x754 [ 43.655720] usb_hcd_pci_probe+0x2bc/0x3f0 [ 43.655720] ehci_pci_probe+0x39/0x40 [ 43.655720] local_pci_probe+0x47/0x80 [ 43.655720] pci_device_probe+0xff/0x1b0 [ 43.655720] really_probe+0xf5/0x3a0 [ 43.655720] driver_probe_device+0xbb/0x100 [ 43.655720] device_driver_attach+0x58/0x60 [ 43.655720] __driver_attach+0x8f/0x150 [ 43.655720] ? device_driver_attach+0x60/0x60 [ 43.655720] bus_for_each_dev+0x74/0xb0 [ 43.655720] driver_attach+0x1e/0x20 [ 43.655720] bus_add_driver+0x151/0x1f0 [ 43.655720] ? ehci_hcd_init+0xb2/0xb2 [ 43.655720] ? do_early_param+0x95/0x95 [ 43.655720] driver_register+0x70/0xc0 [ 43.655720] ? ehci_hcd_init+0xb2/0xb2 [ 43.655720] __pci_register_driver+0x57/0x60 [ 43.655720] ehci_pci_init+0x6a/0x6c [ 43.655720] do_one_initcall+0x4a/0x1fa [ 43.655720] ? do_early_param+0x95/0x95 [ 43.655720] kernel_init_freeable+0x1bd/0x262 [ 43.655720] ? rest_init+0xb0/0xb0 [ 43.655720] kernel_init+0xe/0x110 [ 43.655720] ret_from_fork+0x24/0x50 Fixes: 8af46c784ecfe ("iommu/vt-d: Implement is_attach_deferred iommu ops entry") Cc: stable@vger.kernel.org # v5.3+ Signed-off-by: John Donnelly <john.p.donnelly@oracle.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-10-30iommu/amd: Apply the same IVRS IOAPIC workaround to Acer Aspire A315-41Takashi Iwai
Acer Aspire A315-41 requires the very same workaround as the existing quirk for Dell Latitude 5495. Add the new entry for that. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1137799 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-10-30iommu/ipmmu-vmsa: Remove dev_err() on platform_get_irq() failureYueHaibing
platform_get_irq() will call dev_err() itself on failure, so there is no need for the driver to also do this. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-10-29drm/i915: Fix PCH reference clock for FDI on HSW/BDWVille Syrjälä
The change to skip the PCH reference initialization during fastboot did end up breaking FDI. To fix that let's try to do the PCH reference init whenever we're disabling a DPLL that was using said reference previously. Cc: stable@vger.kernel.org Tested-by: Andrija <akijo97@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112084 Fixes: b16c7ed95caf ("drm/i915: Do not touch the PCH SSC reference if a PLL is using it") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022185643.1483-1-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit dd5279c71405533d4ddbb9453effc60f0f5bf211) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-10-29e1000e: Fix compiler warning when CONFIG_PM_SLEEP is not setSasha Neftin
When CONFIG_PM_SLEEP is not defined compiler complain as follow: CC [M] drivers/net/ethernet/intel/e1000e/netdev.o drivers/net/ethernet/intel/e1000e/netdev.c:6302:12: warning: ‘e1000e_s0ix_entry_flow’ defined but not used [-Wunused-function] static void e1000e_s0ix_entry_flow(struct e1000_adapter *adapter) drivers/net/ethernet/intel/e1000e/netdev.c:6411:12: warning: ‘e1000e_s0ix_exit_flow’ defined but not used [-Wunused-function] static void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter) LD [M] drivers/net/ethernet/intel/e1000e/e1000e.o Add wrap to fix these warnings. Reported-by: kbuild test robot <lpk@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-29e1000e: Add support for Tiger LakeSasha Neftin
Add devices ID's for the next LOM generations that will be available on the next Intel Client platform (Tiger Lake) This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-29i40e: Add UDP segmentation offload supportJosh Hunt
Based on a series from Alexander Duyck this change adds UDP segmentation offload support to the i40e driver. CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Willem de Bruijn <willemb@google.com> Signed-off-by: Josh Hunt <johunt@akamai.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-29ixgbe: Add UDP segmentation offload supportJosh Hunt
Repost from a series by Alexander Duyck to add UDP segmentation offload support to the igb driver: https://lore.kernel.org/netdev/20180504003916.4769.66271.stgit@localhost.localdomain/ CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Willem de Bruijn <willemb@google.com> Suggested-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Josh Hunt <johunt@akamai.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-29igb: Add UDP segmentation offload supportJosh Hunt
Based on a series from Alexander Duyck this change adds UDP segmentation offload support to the igb driver. CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Willem de Bruijn <willemb@google.com> Signed-off-by: Josh Hunt <johunt@akamai.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-29nfc: pn532_uart: Make use of pn532 autopollLars Poeschel
This switches the pn532 UART phy driver from manually polling to the new autopoll mechanism. Cc: Johan Hovold <johan@kernel.org> Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29nfc: pn533: Add autopoll capabilityLars Poeschel
pn532 devices support an autopoll command, that lets the chip automatically poll for selected nfc technologies instead of manually looping through every single nfc technology the user is interested in. This is faster and less cpu and bus intensive than manually polling. This adds this autopoll capability to the pn533 driver. Cc: Johan Hovold <johan@kernel.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29nfc: pn533: add UART phy driverLars Poeschel
This adds the UART phy interface for the pn533 driver. The pn533 driver can be used through UART interface this way. It is implemented as a serdev device. Cc: Johan Hovold <johan@kernel.org> Cc: Claudiu Beznea <Claudiu.Beznea@microchip.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29nfc: pn533: Split pn533 init & nfc_registerLars Poeschel
There is a problem in the initialisation and setup of the pn533: It registers with nfc too early. It could happen, that it finished registering with nfc and someone starts using it. But setup of the pn533 is not yet finished. Bad or at least unintended things could happen. So I split out nfc registering (and unregistering) to seperate functions that have to be called late in probe then. i2c requires a bit more love: i2c requests an irq in it's probe function. 'Commit 32ecc75ded72 ("NFC: pn533: change order operations in dev registation")' shows, this can not happen too early. An irq can be served before structs are fully initialized. The way chosen to prevent this is to request the irq after nfc_alloc_device initialized the structs, but before nfc_register_device. So there is now this pn532_i2c_nfc_alloc function. Cc: Johan Hovold <johan@kernel.org> Cc: Claudiu Beznea <Claudiu.Beznea@microchip.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29nfc: pn533: Add dev_up/dev_down hooks to phy_opsLars Poeschel
This adds hooks for dev_up and dev_down to the phy_ops. They are optional. The idea is to inform the phy driver when the nfc chip is really going to be used. When it is not used, the phy driver can suspend it's interface to the nfc chip to save some power. The nfc chip is considered not in use before dev_up and after dev_down. Cc: Johan Hovold <johan@kernel.org> Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29nfc: pn533: i2c: "pn532" as dt compatible stringLars Poeschel
It is favourable to have one unified compatible string for devices that have multiple interfaces. So this adds simply "pn532" as the devicetree binding compatible string and makes a note that the old ones are deprecated. Cc: Johan Hovold <johan@kernel.org> Cc: Simon Horman <horms@verge.net.au> Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29e1000e: Drop unnecessary __E1000_DOWN bit twiddlingAlexander Duyck
Since we no longer check for __E1000_DOWN in e1000e_close we can drop the spot where we were restoring the bit. This saves us a bit of unnecessary complexity. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-29e1000e: Use rtnl_lock to prevent race conditions between net and pci/pmAlexander Duyck
This patch is meant to address possible race conditions that can exist between network configuration and power management. A similar issue was fixed for igb in commit 9474933caf21 ("igb: close/suspend race in netif_device_detach"). In addition it consolidates the code so that the PCI error handling code will essentially perform the power management freeze on the device prior to attempting a reset, and will thaw the device afterwards if that is what it is planning to do. Otherwise when we call close on the interface it should see it is detached and not attempt to call the logic to down the interface and free the IRQs again. From what I can tell the check that was adding the check for __E1000_DOWN in e1000e_close was added when runtime power management was added. However it should not be relevant for us as we perform a call to pm_runtime_get_sync before we call e1000_down/free_irq so it should always be back up before we call into this anyway. Reported-by: Morumuri Srivalli <smorumu1@in.ibm.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Tested-by: David Dai <zdai@linux.vnet.ibm.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
2019-10-29Merge tag 'mlx5-fixes-2019-10-24' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-10-24 This series introduces misc fixes to mlx5 driver. v1->v2: - Dropped the kTLS counter documentation patch, Tariq will fix it and send it later. - Added a new fix for link speed mode reporting. ('net/mlx5e: Initialize link modes bitmap on stack') For -stable v4.14 ('net/mlx5e: Fix handling of compressed CQEs in case of low NAPI budget') For -stable v4.19 ('net/mlx5e: Fix ethtool self test: link speed') For -stable v5.2 ('net/mlx5: Fix flow counter list auto bits struct') ('net/mlx5: Fix rtable reference leak') For -stable v5.3 ('net/mlx5e: Remove incorrect match criteria assignment line') ('net/mlx5e: Determine source port properly for vlan push action') ('net/mlx5e: Initialize link modes bitmap on stack') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29e1000e: Add support for Comet LakeSasha Neftin
Add devices ID's for the next LOM generations that will be available on the next Intel Client platform (Comet Lake) This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-29bonding: fix using uninitialized mode_lockTaehee Yoo
When a bonding interface is being created, it setups its mode and options. At that moment, it uses mode_lock so mode_lock should be initialized before that moment. rtnl_newlink() rtnl_create_link() alloc_netdev_mqs() ->setup() //bond_setup() ->newlink //bond_newlink bond_changelink() register_netdevice() ->ndo_init() //bond_init() After commit 089bca2caed0 ("bonding: use dynamic lockdep key instead of subclass"), mode_lock is initialized in bond_init(). So in the bond_changelink(), un-initialized mode_lock can be used. mode_lock should be initialized in bond_setup(). This patch partially reverts commit 089bca2caed0 ("bonding: use dynamic lockdep key instead of subclass") Test command: ip link add bond0 type bond mode 802.3ad lacp_rate 0 Splat looks like: [ 60.615127] INFO: trying to register non-static key. [ 60.615900] the code is fine but needs lockdep annotation. [ 60.616697] turning off the locking correctness validator. [ 60.617490] CPU: 1 PID: 957 Comm: ip Not tainted 5.4.0-rc3+ #109 [ 60.618350] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 60.619481] Call Trace: [ 60.619918] dump_stack+0x7c/0xbb [ 60.620453] register_lock_class+0x1215/0x14d0 [ 60.621131] ? alloc_netdev_mqs+0x7b3/0xcc0 [ 60.621771] ? is_bpf_text_address+0x86/0xf0 [ 60.622416] ? is_dynamic_key+0x230/0x230 [ 60.623032] ? unwind_get_return_address+0x5f/0xa0 [ 60.623757] ? create_prof_cpu_mask+0x20/0x20 [ 60.624408] ? arch_stack_walk+0x83/0xb0 [ 60.625023] __lock_acquire+0xd8/0x3de0 [ 60.625616] ? stack_trace_save+0x82/0xb0 [ 60.626225] ? stack_trace_consume_entry+0x160/0x160 [ 60.626957] ? deactivate_slab.isra.80+0x2c5/0x800 [ 60.627668] ? register_lock_class+0x14d0/0x14d0 [ 60.628380] ? alloc_netdev_mqs+0x7b3/0xcc0 [ 60.629020] ? save_stack+0x69/0x80 [ 60.629574] ? save_stack+0x19/0x80 [ 60.630121] ? __kasan_kmalloc.constprop.4+0xa0/0xd0 [ 60.630859] ? __kmalloc_node+0x16f/0x480 [ 60.631472] ? alloc_netdev_mqs+0x7b3/0xcc0 [ 60.632121] ? rtnl_create_link+0x2ed/0xad0 [ 60.634388] ? __rtnl_newlink+0xad4/0x11b0 [ 60.635024] lock_acquire+0x164/0x3b0 [ 60.635608] ? bond_3ad_update_lacp_rate+0x91/0x200 [bonding] [ 60.636463] _raw_spin_lock_bh+0x38/0x70 [ 60.637084] ? bond_3ad_update_lacp_rate+0x91/0x200 [bonding] [ 60.637930] bond_3ad_update_lacp_rate+0x91/0x200 [bonding] [ 60.638753] ? bond_3ad_lacpdu_recv+0xb30/0xb30 [bonding] [ 60.639552] ? bond_opt_get_val+0x180/0x180 [bonding] [ 60.640307] ? ___slab_alloc+0x5aa/0x610 [ 60.640925] bond_option_lacp_rate_set+0x71/0x140 [bonding] [ 60.641751] __bond_opt_set+0x1ff/0xbb0 [bonding] [ 60.643217] ? kasan_unpoison_shadow+0x30/0x40 [ 60.643924] bond_changelink+0x9a4/0x1700 [bonding] [ 60.644653] ? memset+0x1f/0x40 [ 60.742941] ? bond_slave_changelink+0x1a0/0x1a0 [bonding] [ 60.752694] ? alloc_netdev_mqs+0x8ea/0xcc0 [ 60.753330] ? rtnl_create_link+0x2ed/0xad0 [ 60.753964] bond_newlink+0x1e/0x60 [bonding] [ 60.754612] __rtnl_newlink+0xb9f/0x11b0 [ ... ] Reported-by: syzbot+8da67f407bcba2c72e6e@syzkaller.appspotmail.com Reported-by: syzbot+0d083911ab18b710da71@syzkaller.appspotmail.com Fixes: 089bca2caed0 ("bonding: use dynamic lockdep key instead of subclass") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29net: fec_ptp: Use platform_get_irq_xxx_optional() to avoid error messageAnson Huang
Use platform_get_irq_byname_optional() and platform_get_irq_optional() instead of platform_get_irq_byname() and platform_get_irq() for optional IRQs to avoid below error message during probe: [ 0.795803] fec 30be0000.ethernet: IRQ pps not found [ 0.800787] fec 30be0000.ethernet: IRQ index 3 not found Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29net: fec_main: Use platform_get_irq_byname_optional() to avoid error messageAnson Huang
Failed to get irq using name is NOT fatal as driver will use index to get irq instead, use platform_get_irq_byname_optional() instead of platform_get_irq_byname() to avoid below error message during probe: [ 0.819312] fec 30be0000.ethernet: IRQ int0 not found [ 0.824433] fec 30be0000.ethernet: IRQ int1 not found [ 0.829539] fec 30be0000.ethernet: IRQ int2 not found Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29broadcom: bnxt: Fix use true/false for boolSaurav Girepunje
Use true/false for bool type in bnxt_timer function. Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29cavium: thunder: Fix use true/false for bool typeSaurav Girepunje
use true/false on bool type variables for assignment. Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29net: phy: marvell: add PHY tunable support for more PHY versionsHeiner Kallweit
More PHY versions are compatible with the existing downshift implementation, so let's add downshift support for them. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29net: phy: marvell: add downshift support for M88E1111Heiner Kallweit
This patch adds downshift support for M88E1111. This PHY version uses another register for downshift configuration, reading downshift status is possible via the same register as for other PHY versions. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29net: phy: marvell: fix downshift function namingHeiner Kallweit
I got access to the M88E1111 datasheet, and this PHY version uses another register for downshift configuration. Therefore change prefix to m88e1011, aligned with constants like MII_M1011_PHY_SCR. Fixes: a3bdfce7bf9c ("net: phy: marvell: support downshift as PHY tunable") Reported-by: Chris Healy <Chris.Healy@zii.aero> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29net: phy: marvell: fix typo in constant MII_M1011_PHY_SRC_DOWNSHIFT_MASKHeiner Kallweit
Fix typo and use PHY_SCR for PHY-specific Control Register. Fixes: a3bdfce7bf9c ("net: phy: marvell: support downshift as PHY tunable") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29vxlan: check tun_info options_len properlyXin Long
This patch is to improve the tun_info options_len by dropping the skb when TUNNEL_VXLAN_OPT is set but options_len is less than vxlan_metadata. This can void a potential out-of-bounds access on ip_tun_info. Fixes: ee122c79d422 ("vxlan: Flow based tunneling") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-19 11:26:01 +0000