summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-10-24fsl/fman: don't touch liodn base regs reserved on non-PAMU SoCsLaurentiu Tudor
The liodn base registers are specific to PAMU based NXP systems and are reserved on SMMU based ones. Don't access them unless PAMU is compiled in. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24virt_wifi: fix refcnt leak in module exit routineTaehee Yoo
virt_wifi_newlink() calls netdev_upper_dev_link() and it internally holds reference count of lower interface. Current code does not release a reference count of the lower interface when the lower interface is being deleted. So, reference count leaks occur. Test commands: ip link add dummy0 type dummy ip link add vw1 link dummy0 type virt_wifi ip link del dummy0 Splat looks like: [ 133.787526][ T788] WARNING: CPU: 1 PID: 788 at net/core/dev.c:8274 rollback_registered_many+0x835/0xc80 [ 133.788355][ T788] Modules linked in: virt_wifi cfg80211 dummy team af_packet sch_fq_codel ip_tables x_tables unix [ 133.789377][ T788] CPU: 1 PID: 788 Comm: ip Not tainted 5.4.0-rc3+ #96 [ 133.790069][ T788] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 133.791167][ T788] RIP: 0010:rollback_registered_many+0x835/0xc80 [ 133.791906][ T788] Code: 00 4d 85 ff 0f 84 b5 fd ff ff ba c0 0c 00 00 48 89 de 4c 89 ff e8 9b 58 04 00 48 89 df e8 30 [ 133.794317][ T788] RSP: 0018:ffff88805ba3f338 EFLAGS: 00010202 [ 133.795080][ T788] RAX: ffff88805e57e801 RBX: ffff88805ba34000 RCX: ffffffffa9294723 [ 133.796045][ T788] RDX: 1ffff1100b746816 RSI: 0000000000000008 RDI: ffffffffabcc4240 [ 133.797006][ T788] RBP: ffff88805ba3f4c0 R08: fffffbfff5798849 R09: fffffbfff5798849 [ 133.797993][ T788] R10: 0000000000000001 R11: fffffbfff5798848 R12: dffffc0000000000 [ 133.802514][ T788] R13: ffff88805ba3f440 R14: ffff88805ba3f400 R15: ffff88805ed622c0 [ 133.803237][ T788] FS: 00007f2e9608c0c0(0000) GS:ffff88806cc00000(0000) knlGS:0000000000000000 [ 133.804002][ T788] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 133.804664][ T788] CR2: 00007f2e95610603 CR3: 000000005f68c004 CR4: 00000000000606e0 [ 133.805363][ T788] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 133.806073][ T788] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 133.806787][ T788] Call Trace: [ 133.807069][ T788] ? generic_xdp_install+0x310/0x310 [ 133.807612][ T788] ? lock_acquire+0x164/0x3b0 [ 133.808077][ T788] ? is_bpf_text_address+0x5/0xf0 [ 133.808640][ T788] ? deref_stack_reg+0x9c/0xd0 [ 133.809138][ T788] ? __nla_validate_parse+0x98/0x1ab0 [ 133.809944][ T788] unregister_netdevice_many.part.122+0x13/0x1b0 [ 133.810599][ T788] rtnl_delete_link+0xbc/0x100 [ 133.811073][ T788] ? rtnl_af_register+0xc0/0xc0 [ 133.811672][ T788] rtnl_dellink+0x30e/0x8a0 [ 133.812205][ T788] ? is_bpf_text_address+0x5/0xf0 [ ... ] [ 144.110530][ T788] unregister_netdevice: waiting for dummy0 to become free. Usage count = 1 This patch adds notifier routine to delete upper interface before deleting lower interface. Fixes: c7cdba31ed8b ("mac80211-next: rtnetlink wifi simulation device") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: remove unnecessary variables and callbackTaehee Yoo
This patch removes variables and callback these are related to the nested device structure. devices that can be nested have their own nest_level variable that represents the depth of nested devices. In the previous patch, new {lower/upper}_level variables are added and they replace old private nest_level variable. So, this patch removes all 'nest_level' variables. In order to avoid lockdep warning, ->ndo_get_lock_subclass() was added to get lockdep subclass value, which is actually lower nested depth value. But now, they use the dynamic lockdep key to avoid lockdep warning instead of the subclass. So, this patch removes ->ndo_get_lock_subclass() callback. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24vxlan: add adjacent link to limit depth levelTaehee Yoo
Current vxlan code doesn't limit the number of nested devices. Nested devices would be handled recursively and this routine needs huge stack memory. So, unlimited nested devices could make stack overflow. In order to fix this issue, this patch adds adjacent links. The adjacent link APIs internally check the depth level. Test commands: ip link add dummy0 type dummy ip link add vxlan0 type vxlan id 0 group 239.1.1.1 dev dummy0 \ dstport 4789 for i in {1..100} do let A=$i-1 ip link add vxlan$i type vxlan id $i group 239.1.1.1 \ dev vxlan$A dstport 4789 done ip link del dummy0 The top upper link is vxlan100 and the lowest link is vxlan0. When vxlan0 is deleting, the upper devices will be deleted recursively. It needs huge stack memory so it makes stack overflow. Splat looks like: [ 229.628477] ============================================================================= [ 229.629785] BUG page->ptl (Not tainted): Padding overwritten. 0x0000000026abf214-0x0000000091f6abb2 [ 229.629785] ----------------------------------------------------------------------------- [ 229.629785] [ 229.655439] ================================================================== [ 229.629785] INFO: Slab 0x00000000ff7cfda8 objects=19 used=19 fp=0x00000000fe33776c flags=0x200000000010200 [ 229.655688] BUG: KASAN: stack-out-of-bounds in unmap_single_vma+0x25a/0x2e0 [ 229.655688] Read of size 8 at addr ffff888113076928 by task vlan-network-in/2334 [ 229.655688] [ 229.629785] Padding 0000000026abf214: 00 80 14 0d 81 88 ff ff 68 91 81 14 81 88 ff ff ........h....... [ 229.629785] Padding 0000000001e24790: 38 91 81 14 81 88 ff ff 68 91 81 14 81 88 ff ff 8.......h....... [ 229.629785] Padding 00000000b39397c8: 33 30 62 a7 ff ff ff ff ff eb 60 22 10 f1 ff 1f 30b.......`".... [ 229.629785] Padding 00000000bc98f53a: 80 60 07 13 81 88 ff ff 00 80 14 0d 81 88 ff ff .`.............. [ 229.629785] Padding 000000002aa8123d: 68 91 81 14 81 88 ff ff f7 21 17 a7 ff ff ff ff h........!...... [ 229.629785] Padding 000000001c8c2369: 08 81 14 0d 81 88 ff ff 03 02 00 00 00 00 00 00 ................ [ 229.629785] Padding 000000004e290c5d: 21 90 a2 21 10 ed ff ff 00 00 00 00 00 fc ff df !..!............ [ 229.629785] Padding 000000000e25d731: 18 60 07 13 81 88 ff ff c0 8b 13 05 81 88 ff ff .`.............. [ 229.629785] Padding 000000007adc7ab3: b3 8a b5 41 00 00 00 00 ...A.... [ 229.629785] FIX page->ptl: Restoring 0x0000000026abf214-0x0000000091f6abb2=0x5a [ ... ] Fixes: acaf4e70997f ("net: vxlan: when lower dev unregisters remove vxlan dev as well") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24macsec: fix refcnt leak in module exit routineTaehee Yoo
When a macsec interface is created, it increases a refcnt to a lower device(real device). when macsec interface is deleted, the refcnt is decreased in macsec_free_netdev(), which is ->priv_destructor() of macsec interface. The problem scenario is this. When nested macsec interfaces are exiting, the exit routine of the macsec module makes refcnt leaks. Test commands: ip link add dummy0 type dummy ip link add macsec0 link dummy0 type macsec ip link add macsec1 link macsec0 type macsec modprobe -rv macsec [ 208.629433] unregister_netdevice: waiting for macsec0 to become free. Usage count = 1 Steps of exit routine of macsec module are below. 1. Calls ->dellink() in __rtnl_link_unregister(). 2. Checks refcnt and wait refcnt to be 0 if refcnt is not 0 in netdev_run_todo(). 3. Calls ->priv_destruvtor() in netdev_run_todo(). Step2 checks refcnt, but step3 decreases refcnt. So, step2 waits forever. This patch makes the macsec module do not hold a refcnt of the lower device because it already holds a refcnt of the lower device with netdev_upper_dev_link(). Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24team: fix nested locking lockdep warningTaehee Yoo
team interface could be nested and it's lock variable could be nested too. But this lock uses static lockdep key and there is no nested locking handling code such as mutex_lock_nested() and so on. so the Lockdep would warn about the circular locking scenario that couldn't happen. In order to fix, this patch makes the team module to use dynamic lock key instead of static key. Test commands: ip link add team0 type team ip link add team1 type team ip link set team0 master team1 ip link set team0 nomaster ip link set team1 master team0 ip link set team1 nomaster Splat that looks like: [ 40.364352] WARNING: possible recursive locking detected [ 40.364964] 5.4.0-rc3+ #96 Not tainted [ 40.365405] -------------------------------------------- [ 40.365973] ip/750 is trying to acquire lock: [ 40.366542] ffff888060b34c40 (&team->lock){+.+.}, at: team_set_mac_address+0x151/0x290 [team] [ 40.367689] but task is already holding lock: [ 40.368729] ffff888051201c40 (&team->lock){+.+.}, at: team_del_slave+0x29/0x60 [team] [ 40.370280] other info that might help us debug this: [ 40.371159] Possible unsafe locking scenario: [ 40.371942] CPU0 [ 40.372338] ---- [ 40.372673] lock(&team->lock); [ 40.373115] lock(&team->lock); [ 40.373549] *** DEADLOCK *** [ 40.374432] May be due to missing lock nesting notation [ 40.375338] 2 locks held by ip/750: [ 40.375851] #0: ffffffffabcc42b0 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x466/0x8a0 [ 40.376927] #1: ffff888051201c40 (&team->lock){+.+.}, at: team_del_slave+0x29/0x60 [team] [ 40.377989] stack backtrace: [ 40.378650] CPU: 0 PID: 750 Comm: ip Not tainted 5.4.0-rc3+ #96 [ 40.379368] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 40.380574] Call Trace: [ 40.381208] dump_stack+0x7c/0xbb [ 40.381959] __lock_acquire+0x269d/0x3de0 [ 40.382817] ? register_lock_class+0x14d0/0x14d0 [ 40.383784] ? check_chain_key+0x236/0x5d0 [ 40.384518] lock_acquire+0x164/0x3b0 [ 40.385074] ? team_set_mac_address+0x151/0x290 [team] [ 40.385805] __mutex_lock+0x14d/0x14c0 [ 40.386371] ? team_set_mac_address+0x151/0x290 [team] [ 40.387038] ? team_set_mac_address+0x151/0x290 [team] [ 40.387632] ? mutex_lock_io_nested+0x1380/0x1380 [ 40.388245] ? team_del_slave+0x60/0x60 [team] [ 40.388752] ? rcu_read_lock_sched_held+0x90/0xc0 [ 40.389304] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 40.389819] ? lock_acquire+0x164/0x3b0 [ 40.390285] ? lockdep_rtnl_is_held+0x16/0x20 [ 40.390797] ? team_port_get_rtnl+0x90/0xe0 [team] [ 40.391353] ? __module_text_address+0x13/0x140 [ 40.391886] ? team_set_mac_address+0x151/0x290 [team] [ 40.392547] team_set_mac_address+0x151/0x290 [team] [ 40.393111] dev_set_mac_address+0x1f0/0x3f0 [ ... ] Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24bonding: use dynamic lockdep key instead of subclassTaehee Yoo
All bonding device has same lockdep key and subclass is initialized with nest_level. But actual nest_level value can be changed when a lower device is attached. And at this moment, the subclass should be updated but it seems to be unsafe. So this patch makes bonding use dynamic lockdep key instead of the subclass. Test commands: ip link add bond0 type bond for i in {1..5} do let A=$i-1 ip link add bond$i type bond ip link set bond$i master bond$A done ip link set bond5 master bond0 Splat looks like: [ 307.992912] WARNING: possible recursive locking detected [ 307.993656] 5.4.0-rc3+ #96 Tainted: G W [ 307.994367] -------------------------------------------- [ 307.995092] ip/761 is trying to acquire lock: [ 307.995710] ffff8880513aac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding] [ 307.997045] but task is already holding lock: [ 307.997923] ffff88805fcbac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding] [ 307.999215] other info that might help us debug this: [ 308.000251] Possible unsafe locking scenario: [ 308.001137] CPU0 [ 308.001533] ---- [ 308.001915] lock(&(&bond->stats_lock)->rlock#2/2); [ 308.002609] lock(&(&bond->stats_lock)->rlock#2/2); [ 308.003302] *** DEADLOCK *** [ 308.004310] May be due to missing lock nesting notation [ 308.005319] 3 locks held by ip/761: [ 308.005830] #0: ffffffff9fcc42b0 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x466/0x8a0 [ 308.006894] #1: ffff88805fcbac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding] [ 308.008243] #2: ffffffff9f9219c0 (rcu_read_lock){....}, at: bond_get_stats+0x9f/0x500 [bonding] [ 308.009422] stack backtrace: [ 308.010124] CPU: 0 PID: 761 Comm: ip Tainted: G W 5.4.0-rc3+ #96 [ 308.011097] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 308.012179] Call Trace: [ 308.012601] dump_stack+0x7c/0xbb [ 308.013089] __lock_acquire+0x269d/0x3de0 [ 308.013669] ? register_lock_class+0x14d0/0x14d0 [ 308.014318] lock_acquire+0x164/0x3b0 [ 308.014858] ? bond_get_stats+0xb8/0x500 [bonding] [ 308.015520] _raw_spin_lock_nested+0x2e/0x60 [ 308.016129] ? bond_get_stats+0xb8/0x500 [bonding] [ 308.017215] bond_get_stats+0xb8/0x500 [bonding] [ 308.018454] ? bond_arp_rcv+0xf10/0xf10 [bonding] [ 308.019710] ? rcu_read_lock_held+0x90/0xa0 [ 308.020605] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 308.021286] ? bond_get_stats+0x9f/0x500 [bonding] [ 308.021953] dev_get_stats+0x1ec/0x270 [ 308.022508] bond_get_stats+0x1d1/0x500 [bonding] Fixes: d3fff6c443fe ("net: add netdev_lockdep_set_classes() helper") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24bonding: fix unexpected IFF_BONDING bit unsetTaehee Yoo
The IFF_BONDING means bonding master or bonding slave device. ->ndo_add_slave() sets IFF_BONDING flag and ->ndo_del_slave() unsets IFF_BONDING flag. bond0<--bond1 Both bond0 and bond1 are bonding device and these should keep having IFF_BONDING flag until they are removed. But bond1 would lose IFF_BONDING at ->ndo_del_slave() because that routine do not check whether the slave device is the bonding type or not. This patch adds the interface type check routine before removing IFF_BONDING flag. Test commands: ip link add bond0 type bond ip link add bond1 type bond ip link set bond1 master bond0 ip link set bond1 nomaster ip link del bond1 type bond ip link add bond1 type bond Splat looks like: [ 226.665555] proc_dir_entry 'bonding/bond1' already registered [ 226.666440] WARNING: CPU: 0 PID: 737 at fs/proc/generic.c:361 proc_register+0x2a9/0x3e0 [ 226.667571] Modules linked in: bonding af_packet sch_fq_codel ip_tables x_tables unix [ 226.668662] CPU: 0 PID: 737 Comm: ip Not tainted 5.4.0-rc3+ #96 [ 226.669508] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 226.670652] RIP: 0010:proc_register+0x2a9/0x3e0 [ 226.671612] Code: 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 39 01 00 00 48 8b 04 24 48 89 ea 48 c7 c7 a0 0b 14 9f 48 8b b0 e 0 00 00 00 e8 07 e7 88 ff <0f> 0b 48 c7 c7 40 2d a5 9f e8 59 d6 23 01 48 8b 4c 24 10 48 b8 00 [ 226.675007] RSP: 0018:ffff888050e17078 EFLAGS: 00010282 [ 226.675761] RAX: dffffc0000000008 RBX: ffff88805fdd0f10 RCX: ffffffff9dd344e2 [ 226.676757] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88806c9f6b8c [ 226.677751] RBP: ffff8880507160f3 R08: ffffed100d940019 R09: ffffed100d940019 [ 226.678761] R10: 0000000000000001 R11: ffffed100d940018 R12: ffff888050716008 [ 226.679757] R13: ffff8880507160f2 R14: dffffc0000000000 R15: ffffed100a0e2c1e [ 226.680758] FS: 00007fdc217cc0c0(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 226.681886] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 226.682719] CR2: 00007f49313424d0 CR3: 0000000050e46001 CR4: 00000000000606f0 [ 226.683727] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 226.684725] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 226.685681] Call Trace: [ 226.687089] proc_create_seq_private+0xb3/0xf0 [ 226.687778] bond_create_proc_entry+0x1b3/0x3f0 [bonding] [ 226.691458] bond_netdev_event+0x433/0x970 [bonding] [ 226.692139] ? __module_text_address+0x13/0x140 [ 226.692779] notifier_call_chain+0x90/0x160 [ 226.693401] register_netdevice+0x9b3/0xd80 [ 226.694010] ? alloc_netdev_mqs+0x854/0xc10 [ 226.694629] ? netdev_change_features+0xa0/0xa0 [ 226.695278] ? rtnl_create_link+0x2ed/0xad0 [ 226.695849] bond_newlink+0x2a/0x60 [bonding] [ 226.696422] __rtnl_newlink+0xb9f/0x11b0 [ 226.696968] ? rtnl_link_unregister+0x220/0x220 [ ... ] Fixes: 0b680e753724 ("[PATCH] bonding: Add priv_flag to avoid event mishandling") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: core: add generic lockdep keysTaehee Yoo
Some interface types could be nested. (VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..) These interface types should set lockdep class because, without lockdep class key, lockdep always warn about unexisting circular locking. In the current code, these interfaces have their own lockdep class keys and these manage itself. So that there are so many duplicate code around the /driver/net and /net/. This patch adds new generic lockdep keys and some helper functions for it. This patch does below changes. a) Add lockdep class keys in struct net_device - qdisc_running, xmit, addr_list, qdisc_busylock - these keys are used as dynamic lockdep key. b) When net_device is being allocated, lockdep keys are registered. - alloc_netdev_mqs() c) When net_device is being free'd llockdep keys are unregistered. - free_netdev() d) Add generic lockdep key helper function - netdev_register_lockdep_key() - netdev_unregister_lockdep_key() - netdev_update_lockdep_key() e) Remove unnecessary generic lockdep macro and functions f) Remove unnecessary lockdep code of each interfaces. After this patch, each interface modules don't need to maintain their lockdep keys. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24Merge tag 'acpi-5.4-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix locking issue in the error code path of a function that belongs to the sysfs interface exposed by the ACPI NFIT handling code (Dan Carpenter)" * tag 'acpi-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: NFIT: Fix unlock on error in scrub_show()
2019-10-24Merge tag 'pm-5.4-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix problems related to frequency limits management in cpufreq that were introduced during the 5.3 cycle (when PM QoS had started to be used for that), fix a few issues in the OPP (operating performance points) library code and fix up the recently added haltpoll cpuidle driver. The cpufreq changes are somewhat bigger that I would like them to be at this stage of the cycle, but the problems fixed by them include crashes on boot and shutdown in some cases (among other things) and in my view it is better to address the root of the issue right away. Specifics: - Using device PM QoS of CPU devices for managing frequency limits in cpufreq does not work, so introduce frequency QoS (based on the original low-level PM QoS) for this purpose, switch cpufreq and related code over to using it and fix a race involving deferred updates of frequency limits on top of that (Rafael Wysocki, Sudeep Holla). - Avoid calling regulator_enable()/disable() from the OPP framework to avoid side-effects on boot-enabled regulators that may change their initial voltage due to performing initial voltage balancing without all restrictions from the consumers (Marek Szyprowski). - Avoid a kref management issue in the OPP library code and drop an incorrectly added lockdep_assert_held() from it (Viresh Kumar). - Make the recently added haltpoll cpuidle driver take the 'idle=' override into account as appropriate (Zhenzhong Duan)" * tag 'pm-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: opp: Reinitialize the list_kref before adding the static OPPs again cpufreq: Cancel policy update work scheduled before freeing cpuidle: haltpoll: Take 'idle=' override into account opp: core: Revert "add regulators enable and disable" PM: QoS: Drop frequency QoS types from device PM QoS cpufreq: Use per-policy frequency QoS PM: QoS: Introduce frequency QoS opp: of: drop incorrect lockdep_assert_held()
2019-10-24i2c: stm32f7: remove warning when compiling with W=1Alain Volmat
Remove the following warning: drivers/i2c/busses/i2c-stm32f7.c:315: warning: cannot understand function prototype: 'struct stm32f7_i2c_spec i2c_specs[] = Replace a comment starting with /** by simply /* to avoid having it interpreted as a kernel-doc comment. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-10-24i2c: stm32f7: fix a race in slave mode with arbitration loss irqFabrice Gasnier
When in slave mode, an arbitration loss (ARLO) may be detected before the slave had a chance to detect the stop condition (STOPF in ISR). This is seen when two master + slave adapters switch their roles. It provokes the i2c bus to be stuck, busy as SCL line is stretched. - the I2C_SLAVE_STOP event is never generated due to STOPF flag is set but don't generate an irq (race with ARLO irq, STOPIE is masked). STOPF flag remains set until next master xfer (e.g. when STOPIE irq get unmasked). In this case, completion is generated too early: immediately upon new transfer request (then it doesn't send all data). - Some data get stuck in TXDR register. As a consequence, the controller stretches the SCL line: the bus gets busy until a future master transfer triggers the bus busy / recovery mechanism (this can take time... and may never happen at all) So choice is to let the STOPF being detected by the slave isr handler, to properly handle this stop condition. E.g. don't mask IRQs in error handler, when the slave is running. Fixes: 60d609f30de2 ("i2c: i2c-stm32f7: Add slave support") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-10-24i2c: stm32f7: fix first byte to send in slave modeFabrice Gasnier
The slave-interface documentation [1] states "the bus driver should transmit the first byte" upon I2C_SLAVE_READ_REQUESTED slave event: - 'val': backend returns first byte to be sent The driver currently ignores the 1st byte to send on this event. [1] https://www.kernel.org/doc/Documentation/i2c/slave-interface Fixes: 60d609f30de2 ("i2c: i2c-stm32f7: Add slave support") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-10-24i2c: mt65xx: fix NULL ptr dereferenceFabien Parent
Since commit abf4923e97c3 ("i2c: mediatek: disable zero-length transfers for mt8183"), there is a NULL pointer dereference for all the SoCs that don't have any quirk. mtk_i2c_functionality is not checking that the quirks pointer is not NULL before starting to use it. This commit add a call to i2c_check_quirks which will check whether the quirks pointer is set, and if so will check if the IP has the NO_ZERO_LEN quirk. Fixes: abf4923e97c3 ("i2c: mediatek: disable zero-length transfers for mt8183") Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Cengiz Can <cengiz@kernel.wtf> Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested-by: Ulrich Hecht <uli@fpond.eu> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-10-24RDMA/nldev: Skip counter if port doesn't matchMark Zhang
The counter resource should return -EAGAIN if it was requested for a different port, this is similar to how QP works if the users provides a port filter. Otherwise port filtering in netlink will return broken counter nests. Fixes: c4ffee7c9bdb ("RDMA/netlink: Implement counter dumpit calback") Link: https://lore.kernel.org/r/20191020062800.8065-1-leon@kernel.org Signed-off-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-24irqchip/gic-v3-its: Use the exact ITSList for VMOVPZenghui Yu
On a system without Single VMOVP support (say GITS_TYPER.VMOVP == 0), we will map vPEs only on ITSs that will actually control interrupts for the given VM. And when moving a vPE, the VMOVP command will be issued only for those ITSs. But when issuing VMOVPs we seemed fail to present the exact ITSList to ITSs who are actually included in the synchronization operation. The its_list_map we're currently using includes all ITSs in the system, even though some of them don't have the corresponding vPE mapping at all. Introduce get_its_list() to get the per-VM its_list_map, to indicate which ITSs have vPE mappings for the given VM, and use this map as the expected ITSList when building VMOVP. This is hopefully a performance gain not to do some synchronization with those unsuspecting ITSs. And initialize the whole command descriptor to zero at beginning, since the seq_num and its_list should be RES0 when GITS_TYPER.VMOVP == 1. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1571802386-2680-1-git-send-email-yuzenghui@huawei.com
2019-10-24net: aquantia: add support for PIN funcsDmitry Bezrukov
Depending on FW configuration we can manage from 0 to 3 PINs for periodic output and from 0 to 1 ext ts PIN for getting TS for external event. Ext TS PIN functionality is implemented via periodic timestamps polling directly from PHY, because right now there is now way to receive the PIN trigger interrupt from phy. The polling interval is 15 milliseconds. Co-developed-by: Egor Pomozov <epomozov@marvell.com> Signed-off-by: Egor Pomozov <epomozov@marvell.com> Co-developed-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: add support for Phy accessDmitry Bezrukov
GPIO PIN control and access is done by direct phy manipulation. Here we add an aq_phy module which is able to access phy registers via MDIO access mailbox. Access is controlled via HW semaphore. Co-developed-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: implement get_ts_info ethtoolEgor Pomozov
Ethtool callback with basic information on what PTP features are supported by the device. Signed-off-by: Egor Pomozov <epomozov@marvell.com> Co-developed-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Co-developed-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: add support for ptp ioctlsEgor Pomozov
Here we add support for PTP specific IOCTLs of HW timestamp get/set. These will use filters to configure flows onto the required queue ids. Co-developed-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Egor Pomozov <epomozov@marvell.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: rx filters for ptpDmitry Bezrukov
We implement HW filter reservation for PTP traffic. Special location in filters table is marked as reserved, because incoming ptp traffic should be directed only to PTP designated queue. This way HW will do PTP timestamping and proper processing. Co-developed-by: Egor Pomozov <epomozov@marvell.com> Signed-off-by: Egor Pomozov <epomozov@marvell.com> Co-developed-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: implement data PTP datapathEgor Pomozov
Here we do alloc/free IRQs for PTP rings. We also implement processing of PTP packets on TX and RX sides. Signed-off-by: Egor Pomozov <epomozov@marvell.com> Co-developed-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Co-developed-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: styling fixes on ptp related functionsDmitry Bezrukov
Checkpatch and styling fixes on parts of code touched by ptp Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: add PTP rings infrastructureEgor Pomozov
Add implementations of PTP rings alloc/free. PTP desing on this device uses two separate rings on a separate traffic class for traffic rx/tx. Third ring (hwts) is not a traffic ring, but is used only to receive timestamps of the transmitted packets. Signed-off-by: Egor Pomozov <epomozov@marvell.com> Co-developed-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Co-developed-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: add basic ptp_clock callbacksEgor Pomozov
Basic HW functions implemented for adjusting frequency, adjusting time, getting and setting time. With these callbacks we now do register ptp clock in the system. Firmware interface parts are defined for PTP requests and interactions. Enable/disable PTP counters in HW on clock register/unregister. Signed-off-by: Egor Pomozov <epomozov@marvell.com> Co-developed-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Co-developed-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: unify styling of bit enumsDmitry Bezrukov
Make some other bit-enums more clear about positioning, this helps on debugging and development Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: aquantia: PTP skeleton declarations and callbacksEgor Pomozov
Here we add basic function for PTP clock register/unregister. We also declare FW/HW capability bits used to control PTP feature on device. PTP device is created if network card has appropriate FW that has PTP enabled in config. HW supports timestamping for PTPv2 802.AS1 and PTPv2 IPv4 UDP packets. It also supports basic PTP callbacks for getting/setting time, adjusting frequency and time as well. Signed-off-by: Egor Pomozov <epomozov@marvell.com> Co-developed-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Signed-off-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com> Co-developed-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24Merge branches 'pm-cpuidle' and 'pm-opp'Rafael J. Wysocki
* pm-cpuidle: cpuidle: haltpoll: Take 'idle=' override into account * pm-opp: opp: Reinitialize the list_kref before adding the static OPPs again opp: core: Revert "add regulators enable and disable" opp: of: drop incorrect lockdep_assert_held()
2019-10-24Merge tag 'mfd-fixes-5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD fix from Lee Jones: "Fix broken support for BananaPi-r2" * tag 'mfd-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: mt6397: Fix probe after changing mt6397-core
2019-10-24mfd: mt6397: Fix probe after changing mt6397-coreFrank Wunderlich
Part 3 from this series [1] was not merged due to wrong splitting and breaks mt6323 pmic on bananapi-r2 dmesg prints this line and at least switch is not initialized on bananapi-r2 mt6397 1000d000.pwrap:mt6323: unsupported chip: 0x0 this patch contains only the probe-changes and chip_data structs from original part 3 by Hsin-Hsiung Wang [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=164155 Fixes: a4872e80ce7d ("mfd: mt6397: Extract IRQ related code from core driver") Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-24rtl8xxxu: fix warnings for symbol not declaredChris Chiu
Fix the following sparse warnings. sparse: symbol 'rtl8723bu_set_coex_with_type' was not declared. Should it be static? sparse: symbol 'rtl8723bu_update_bt_link_info' was not declared. Should it be static? sparse: symbol 'rtl8723bu_handle_bt_inquiry' was not declared. Should it be static? sparse: symbol 'rtl8723bu_handle_bt_info' was not declared. Should it be static? Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtl8xxxu: remove set but not used variable 'rate_mask'YueHaibing
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:4484:6: warning: variable rate_mask set but not used [-Wunused-but-set-variable] It is never used since commit a9bb0b515778 ("rtl8xxxu: Improve TX performance of RTL8723BU on rtl8xxxu driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24atmel: remove set but not used variable 'dev'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/atmel/atmel_cs.c:120:21: warning: variable dev set but not used [-Wunused-but-set-variable] It is never used, so can remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24adm80211: remove set but not used variables 'mem_addr' and 'io_addr'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/admtek/adm8211.c:1784:16: warning: variable mem_addr set but not used [-Wunused-but-set-variable] drivers/net/wireless/admtek/adm8211.c:1785:15: warning: variable io_addr set but not used [-Wunused-but-set-variable] They are never used, so can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtlwifi: Remove unnecessary NULL check in rtl_regd_initNathan Chancellor
When building with Clang + -Wtautological-pointer-compare: drivers/net/wireless/realtek/rtlwifi/regd.c:389:33: warning: comparison of address of 'rtlpriv->regd' equal to a null pointer is always false [-Wtautological-pointer-compare] if (wiphy == NULL || &rtlpriv->regd == NULL) ~~~~~~~~~^~~~ ~~~~ 1 warning generated. The address of an array member is never NULL unless it is the first struct member so remove the unnecessary check. This was addressed in the staging version of the driver in commit f986978b32b3 ("Staging: rtlwifi: remove unnecessary NULL check"). While we are here, fix the following checkpatch warning: CHECK: Comparison to NULL could be written "!wiphy" 35: FILE: drivers/net/wireless/realtek/rtlwifi/regd.c:389: + if (wiphy == NULL) Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Link:https://github.com/ClangBuiltLinux/linux/issues/750 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtw88: add phy_info debugfs to show Tx/Rx physical statusTsang-Shian Lin
This commit adds several Tx/Rx physical information to phy_info debugfs for 8822B/8822C. By this debugfs, we can know physical information, such as Tx/Rx rate, RSSI, EVM,SNR, etc. The information is gotten from the packets of Tx/Rx path. It has no impact for the performance of 8822B/8822C. In the fields, we may meet different kinds of problems, but we may have no professional instrument to check them. At this moment, this debugfs is a good tool, and it may provide useful information for debug. Signed-off-by: Tsang-Shian Lin <thlin@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtw88: add set_bitrate_mask supportTzu-En Huang
Support setting bit rate from upper layer. After configuring the original rate control result in the driver, the result is then masked by the bit rate mask received from the ops set_bitrate_mask. Lastly, the masked result will be sent to firmware. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtw88: Enable 802.11ac beamformee supportTzu-En Huang
Enable MU-MIMO transmit beamformee support for chipset 8822b and 8822c. If the driver is in station mode and associated with an AP, and the capabilities of both meet the requirement of beamforming, driver will run as a beamformee and the corresponding chip settings will be set. In addition, module parameter support_bf is added to enable or disable beamforming. Sometimes driver will need to disable for inter-operate issues, and it would be easier for driver to debug. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtw88: add power tracking supportTzu-En Huang
The temperature of the chip can affect the output power of the RF components. Hence driver requires to compensate the power by adjusting the power index recorded in the power swing table. And if the difference of current thermal value to the default thermal value exceeds a threshold, the RF IQK should be triggered to re-calibrate the characteristics of the RF components, to keep the output IQ vectors of the RF components orthogonal enough. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtw88: use macro to check the current bandYan-Hsuan Chuang
Add macros to see which band we are, based on the current channel. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24bcma: fix block comment styleYadav Lamichhane
Fix a coding style issue. Signed-off-by: Yadav Lamichhane <tuxomega1@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23net: phy: smsc: LAN8740: add PHY_RST_AFTER_CLK_EN flagMartin Fuzzey
The LAN8740, like the 8720, also requires a reset after enabling clock. The datasheet [1] 3.8.5.1 says: "During a Hardware reset, an external clock must be supplied to the XTAL1/CLKIN signal." I have observed this issue on a custom i.MX6 based board with the LAN8740A. [1] http://ww1.microchip.com/downloads/en/DeviceDoc/8740a.pdf Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-23net: lan78xx: remove set but not used variable 'event'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/usb/lan78xx.c:3995:6: warning: variable event set but not used [-Wunused-but-set-variable] It is never used, so can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-23mlxsw: spectrum_buffers: Calculate the size of the main poolPetr Machata
Instead of hard-coding the size of the largest pool, calculate it from the reported guaranteed shared buffer size and sizes of other pools (currently only the CPU port pool). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-23mlxsw: spectrum: Use guaranteed buffer size as pool size limitPetr Machata
There are two resources associated with shared buffer size: cap_total_buffer_size, and cap_guaranteed_shared_buffer. So far, mlxsw has been using the former as a limit to determine how large a pool size is allowed to be. However, the total size also includes headrooms and reserved space, which really cannot be used for shared buffer pools. Therefore convert mlxsw to use the latter resource as a limit. Adjust hard-coded pool sizes to be the guaranteed size minus 256000 bytes for CPU port pool. On Spectrum-1 that actually leads to an increase. A follow-up patch will have this size calculated automatically. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-23r8169: never set PCI_EXP_DEVCTL_NOSNOOP_ENHeiner Kallweit
Setting PCI_EXP_DEVCTL_NOSNOOP_EN for certain chip versions had been added to the vendor driver more than 10 years ago, and copied from there to r8169. It has been removed from the vendor driver meanwhile and I think we can safely remove this too. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-23net: phy: broadcom: add 1000Base-X support for BCM54616STao Ren
The BCM54616S PHY cannot work properly in RGMII->1000Base-X mode, mainly because genphy functions are designed for copper links, and 1000Base-X (clause 37) auto negotiation needs to be handled differently. This patch enables 1000Base-X support for BCM54616S by customizing 3 driver callbacks, and it's verified to be working on Facebook CMM BMC platform (RGMII->1000Base-KX): - probe: probe callback detects PHY's operation mode based on INTERF_SEL[1:0] pins and 1000X/100FX selection bit in SerDES 100-FX Control register. - config_aneg: calls genphy_c37_config_aneg when the PHY is running in 1000Base-X mode; otherwise, genphy_config_aneg will be called. - read_status: calls genphy_c37_read_status when the PHY is running in 1000Base-X mode; otherwise, genphy_read_status will be called. Note: BCM54616S PHY can also be configured in RGMII->100Base-FX mode, and 100Base-FX support is not available as of now. Signed-off-by: Tao Ren <taoren@fb.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-23net: phy: add support for clause 37 auto-negotiationHeiner Kallweit
This patch adds support for clause 37 1000Base-X auto-negotiation. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Tao Ren <taoren@fb.com> Tested-by: René van Dorst <opensource@vdorst.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-23net: phy: modify assignment to OR for dev_flags in phy_attach_directTao Ren
Modify the assignment to OR when dealing with phydev->dev_flags in phy_attach_direct function, and this is to make sure dev_flags set in driver's probe callback won't be lost. Suggested-by: Andrew Lunn <andrew@lunn.ch> CC: Heiner Kallweit <hkallweit1@gmail.com> CC: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Tao Ren <taoren@fb.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-10-03 01:46:17 +0000