summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-04-24iommu/amd: WARN if KVM attempts to set vCPU affinity without posted intrruptsSean Christopherson
WARN if KVM attempts to set vCPU affinity when posted interrupts aren't enabled, as KVM shouldn't try to enable posting when they're unsupported, and the IOMMU driver darn well should only advertise posting support when AMD_IOMMU_GUEST_IR_VAPIC() is true. Note, KVM consumes is_guest_mode only on success. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20250404193923.1413163-7-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2025-04-24iommu/amd: Return an error if vCPU affinity is set for non-vCPU IRTESean Christopherson
Return -EINVAL instead of success if amd_ir_set_vcpu_affinity() is invoked without use_vapic; lying to KVM about whether or not the IRTE was configured to post IRQs is all kinds of bad. Fixes: d98de49a53e4 ("iommu/amd: Enable vAPIC interrupt remapping mode by default") Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20250404193923.1413163-6-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2025-04-24spi: spi-qpic-snand: propagate errors from qcom_spi_block_erase()Gabor Juhos
The qcom_spi_block_erase() function returns with error in case of failure. Change the qcom_spi_send_cmdaddr() function to propagate these errors to the callers instead of returning with success. Fixes: 7304d1909080 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://patch.msgid.link/20250423-qpic-snand-propagate-error-v1-1-4b26ed45fdb5@gmail.com Reviewed-by: Md Sadre Alam <quic_mdalam@quicinc.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-24net: stmmac: fix multiplication overflow when reading timestampAlexis Lothoré
The current way of reading a timestamp snapshot in stmmac can lead to integer overflow, as the computation is done on 32 bits. The issue has been observed on a dwmac-socfpga platform returning chaotic timestamp values due to this overflow. The corresponding multiplication is done with a MUL instruction, which returns 32 bit values. Explicitly casting the value to 64 bits replaced the MUL with a UMLAL, which computes and returns the result on 64 bits, and so returns correctly the timestamps. Prevent this overflow by explicitly casting the intermediate value to u64 to make sure that the whole computation is made on u64. While at it, apply the same cast on the other dwmac variant (GMAC4) method for snapshot retrieval. Fixes: 477c3e1f6363 ("net: stmmac: Introduce dwmac1000 timestamping operations") Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250423-stmmac_ts-v2-2-e2cf2bbd61b1@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-24net: stmmac: fix dwmac1000 ptp timestamp status offsetAlexis Lothore
When a PTP interrupt occurs, the driver accesses the wrong offset to learn about the number of available snapshots in the FIFO for dwmac1000: it should be accessing bits 29..25, while it is currently reading bits 19..16 (those are bits about the auxiliary triggers which have generated the timestamps). As a consequence, it does not compute correctly the number of available snapshots, and so possibly do not generate the corresponding clock events if the bogus value ends up being 0. Fix clock events generation by reading the correct bits in the timestamp register for dwmac1000. Fixes: 477c3e1f6363 ("net: stmmac: Introduce dwmac1000 timestamping operations") Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250423-stmmac_ts-v2-1-e2cf2bbd61b1@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-24net: dp83822: Fix OF_MDIO config checkJohannes Schneider
When CONFIG_OF_MDIO is set to be a module the code block is not compiled. Use the IS_ENABLED macro that checks for both built in as well as module. Fixes: 5dc39fd5ef35 ("net: phy: DP83822: Add ability to advertise Fiber connection") Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250423044724.1284492-1-johannes.schneider@leica-geosystems.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-23pds_core: make wait_context part of q_infoShannon Nelson
Make the wait_context a full part of the q_info struct rather than a stack variable that goes away after pdsc_adminq_post() is done so that the context is still available after the wait loop has given up. There was a case where a slow development firmware caused the adminq request to time out, but then later the FW finally finished the request and sent the interrupt. The handler tried to complete_all() the completion context that had been created on the stack in pdsc_adminq_post() but no longer existed. This caused bad pointer usage, kernel crashes, and much wailing and gnashing of teeth. Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands") Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250421174606.3892-5-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-23pds_core: Remove unnecessary check in pds_client_adminq_cmd()Brett Creeley
When the pds_core driver was first created there were some race conditions around using the adminq, especially for client drivers. To reduce the possibility of a race condition there's a check against pf->state in pds_client_adminq_cmd(). This is problematic for a couple of reasons: 1. The PDSC_S_INITING_DRIVER bit is set during probe, but not cleared until after everything in probe is complete, which includes creating the auxiliary devices. For pds_fwctl this means it can't make any adminq commands until after pds_core's probe is complete even though the adminq is fully up by the time pds_fwctl's auxiliary device is created. 2. The race conditions around using the adminq have been fixed and this path is already protected against client drivers calling pds_client_adminq_cmd() if the adminq isn't ready, i.e. see pdsc_adminq_post() -> pdsc_adminq_inc_if_up(). Fix this by removing the pf->state check in pds_client_adminq_cmd() because invalid accesses to pds_core's adminq is already handled by pdsc_adminq_post()->pdsc_adminq_inc_if_up(). Fixes: 10659034c622 ("pds_core: add the aux client API") Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250421174606.3892-4-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-23pds_core: handle unsupported PDS_CORE_CMD_FW_CONTROL resultBrett Creeley
If the FW doesn't support the PDS_CORE_CMD_FW_CONTROL command the driver might at the least print garbage and at the worst crash when the user runs the "devlink dev info" devlink command. This happens because the stack variable fw_list is not 0 initialized which results in fw_list.num_fw_slots being a garbage value from the stack. Then the driver tries to access fw_list.fw_names[i] with i >= ARRAY_SIZE and runs off the end of the array. Fix this by initializing the fw_list and by not failing completely if the devcmd fails because other useful information is printed via devlink dev info even if the devcmd fails. Fixes: 45d76f492938 ("pds_core: set up device and adminq") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250421174606.3892-3-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-23pds_core: Prevent possible adminq overflow/stuck conditionBrett Creeley
The pds_core's adminq is protected by the adminq_lock, which prevents more than 1 command to be posted onto it at any one time. This makes it so the client drivers cannot simultaneously post adminq commands. However, the completions happen in a different context, which means multiple adminq commands can be posted sequentially and all waiting on completion. On the FW side, the backing adminq request queue is only 16 entries long and the retry mechanism and/or overflow/stuck prevention is lacking. This can cause the adminq to get stuck, so commands are no longer processed and completions are no longer sent by the FW. As an initial fix, prevent more than 16 outstanding adminq commands so there's no way to cause the adminq from getting stuck. This works because the backing adminq request queue will never have more than 16 pending adminq commands, so it will never overflow. This is done by reducing the adminq depth to 16. Fixes: 45d76f492938 ("pds_core: set up device and adminq") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250421174606.3892-2-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-23net: dsa: mt7530: sync driver-specific behavior of MT7531 variantsDaniel Golle
MT7531 standalone and MMIO variants found in MT7988 and EN7581 share most basic properties. Despite that, assisted_learning_on_cpu_port and mtu_enforcement_ingress were only applied for MT7531 but not for MT7988 or EN7581, causing the expected issues on MMIO devices. Apply both settings equally also for MT7988 and EN7581 by moving both assignments form mt7531_setup() to mt7531_setup_common(). This fixes unwanted flooding of packets due to unknown unicast during DA lookup, as well as issues with heterogenous MTU settings. Fixes: 7f54cc9772ce ("net: dsa: mt7530: split-off common parts from mt7531_setup") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Chester A. Unal <chester.a.unal@arinc9.com> Link: https://patch.msgid.link/89ed7ec6d4fa0395ac53ad2809742bb1ce61ed12.1745290867.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-23misc: pci_endpoint_test: Defer IRQ allocation until ioctl(PCITEST_SET_IRQTYPE)Niklas Cassel
Commit a402006d48a9 ("misc: pci_endpoint_test: Remove global 'irq_type' and 'no_msi'") changed so that the default IRQ vector requested by pci_endpoint_test_probe() was no longer the module param 'irq_type', but instead test->irq_type. test->irq_type is by default IRQ_TYPE_UNDEFINED (until someone calls ioctl(PCITEST_SET_IRQTYPE)). However, the commit also changed so that after initializing test->irq_type to IRQ_TYPE_UNDEFINED, it also overrides it with driver_data->irq_type, if the PCI device and vendor ID provides driver_data. This causes a regression for PCI device and vendor IDs that do not provide driver_data, and the host side pci_endpoint_test_driver driver failed to probe on such platforms: pci-endpoint-test 0001:01:00.0: Invalid IRQ type selected pci-endpoint-test 0001:01:00.0: probe with driver pci-endpoint-test failed with error -22 Considering that the pci endpoint selftests and the old pcitest.sh always call ioctl(PCITEST_SET_IRQTYPE) before performing any test that requires IRQs, fix the regression by removing the allocation of IRQs in pci_endpoint_test_probe(). The IRQ allocation will occur when ioctl(PCITEST_SET_IRQTYPE) is called. A positive side effect of this is that even if the endpoint controller has issues with IRQs, the user can do still do all the tests/ioctls() that do not require working IRQs, e.g. PCITEST_BAR and PCITEST_BARS. This also means that we can remove the now unused irq_type from driver_data. The irq_type will always be the one configured by the user using ioctl(PCITEST_SET_IRQTYPE). (A user that does not know, or care which irq_type that is used, can use PCITEST_IRQ_TYPE_AUTO. This has superseded the need for a default irq_type in driver_data.) [bhelgaas: add probe failure details] Fixes: a402006d48a9c ("misc: pci_endpoint_test: Remove global 'irq_type' and 'no_msi'") Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20250416142825.336554-2-cassel@kernel.org
2025-04-23drm/nouveau: Fix WARN_ON in nouveau_fence_context_kill()Philipp Stanner
Nouveau is mostly designed in a way that it's expected that fences only ever get signaled through nouveau_fence_signal(). However, in at least one other place, nouveau_fence_done(), can signal fences, too. If that happens (race) a signaled fence remains in the pending list for a while, until it gets removed by nouveau_fence_update(). Should nouveau_fence_context_kill() run in the meantime, this would be a bug because the function would attempt to set an error code on an already signaled fence. Have nouveau_fence_context_kill() check for a fence being signaled. Cc: stable@vger.kernel.org # v5.10+ Fixes: ea13e5abf807 ("drm/nouveau: signal pending fences when channel has been killed") Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://lore.kernel.org/r/20250415121900.55719-3-phasta@kernel.org Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-04-23Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes from Michael Tsirkin: "A small number of fixes: - virtgpu is exempt from reset shutdown fow now - a more complete fix is in the works - spec compliance fixes in: - virtio-pci cap commands - vhost_scsi_send_bad_target - virtio console resize - missing locking fix in vhost-scsi - virtio ring - a KCSAN false positive fix - VHOST_*_OWNER documentation fix" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost-scsi: Fix vhost_scsi_send_status() vhost-scsi: Fix vhost_scsi_send_bad_target() vhost-scsi: protect vq->log_used with vq->mutex vhost_task: fix vhost_task_create() documentation virtio_console: fix order of fields cols and rows virtio_console: fix missing byte order handling for cols and rows virtgpu: don't reset on shutdown virtio_ring: Fix data race by tagging event_triggered as racy for KCSAN vhost: fix VHOST_*_OWNER documentation virtio_pci: Use self group type for cap commands
2025-04-23drm/exynos: Fix spelling mistake "enqueu" -> "enqueue"Colin Ian King
There is a spelling mistake in a DRM_DEV_DEBUG_KMS message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2025-04-23drm/exynos: exynos7_drm_decon: Consstify struct decon_dataKrzysztof Kozlowski
static 'struct decon_data' is only read, so it can be const for code safety. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2025-04-23drm/exynos: fixed a spelling errorAnindya Sundar Gayen
Corrected a spelling mistake in the exynos_drm_fimd driver to improve code readability. No functional changes were made. Signed-off-by: Anindya Sundar Gayen <anindya.sg@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2025-04-23drm/exynos/vidi: Remove redundant error handling in vidi_get_modes()Wentao Liang
In the vidi_get_modes() function, if either drm_edid_dup() or drm_edid_alloc() fails, the function will immediately return 0, indicating that no display modes can be retrieved. However, in the event of failure in these two functions, it is still necessary to call the subsequent drm_edid_connector_update() function with a NULL drm_edid as an argument. This ensures that operations such as connector settings are performed in its callee function, _drm_edid_connector_property_update. To maintain the integrity of the operation, redundant error handling needs to be removed. Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2025-04-23drm/exynos: Remove unnecessary checkingGuoqing Jiang
It is not needed since drm_atomic_helper_shutdown checks it. Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2025-04-23wifi: iwlwifi: restore missing initialization of async_handlers_listItamar Shalev
The initialization of async_handlers_list was accidentally removed in a previous change. This patch restores the missing initialization to ensure proper handler registration. Fixes: 6895d74c11d8 ("wifi: iwlwifi: mld: initialize regulatory early") Signed-off-by: Itamar Shalev <itamar.shalev@intel.com> Acked-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250423092503.35206-1-itamar.shalev@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage()Wentao Liang
The function brcmf_usb_dl_writeimage() calls the function brcmf_usb_dl_cmd() but dose not check its return value. The 'state.state' and the 'state.bytes' are uninitialized if the function brcmf_usb_dl_cmd() fails. It is dangerous to use uninitialized variables in the conditions. Add error handling for brcmf_usb_dl_cmd() to jump to error handling path if the brcmf_usb_dl_cmd() fails and the 'state.state' and the 'state.bytes' are uninitialized. Improve the error message to report more detailed error information. Fixes: 71bb244ba2fd ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets") Cc: stable@vger.kernel.org # v3.4+ Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://patch.msgid.link/20250422042203.2259-1-vulab@iscas.ac.cn Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23Merge tag 'cpufreq-arm-fixes-6.15-rc' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Merge ARM cpufreq fixes for 6.15-rc from Viresh Kumar: "- Fix possible out-of-bound / null-ptr-deref in drivers (Andre Przywara and Henry Martin). - Fix Kconfig issues with compile-test (Johan Hovold and Krzysztof Kozlowski). - Fix invalid return value in .get() (Marc Zyngier). - Add SM8650 to cpufreq-dt-platdev blocklist (Pengyu Luo)." * tag 'cpufreq-arm-fixes-6.15-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: fix compile-test defaults cpufreq: cppc: Fix invalid return value in .get() callback cpufreq: scpi: Fix null-ptr-deref in scpi_cpufreq_get_rate() cpufreq: scmi: Fix null-ptr-deref in scmi_cpufreq_get_rate() cpufreq: apple-soc: Fix null-ptr-deref in apple_soc_cpufreq_get_rate() cpufreq: Do not enable by default during compile testing cpufreq: Add SM8650 to cpufreq-dt-platdev blocklist cpufreq: sun50i: prevent out-of-bounds access
2025-04-23wifi: plfxlc: Remove erroneous assert in plfxlc_mac_releaseMurad Masimov
plfxlc_mac_release() asserts that mac->lock is held. This assertion is incorrect, because even if it was possible, it would not be the valid behaviour. The function is used when probe fails or after the device is disconnected. In both cases mac->lock can not be held as the driver is not working with the device at the moment. All functions that use mac->lock unlock it just after it was held. There is also no need to hold mac->lock for plfxlc_mac_release() itself, as mac data is not affected, except for mac->flags, which is modified atomically. This bug leads to the following warning: ================================================================ WARNING: CPU: 0 PID: 127 at drivers/net/wireless/purelifi/plfxlc/mac.c:106 plfxlc_mac_release+0x7d/0xa0 Modules linked in: CPU: 0 PID: 127 Comm: kworker/0:2 Not tainted 6.1.124-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: usb_hub_wq hub_event RIP: 0010:plfxlc_mac_release+0x7d/0xa0 drivers/net/wireless/purelifi/plfxlc/mac.c:106 Call Trace: <TASK> probe+0x941/0xbd0 drivers/net/wireless/purelifi/plfxlc/usb.c:694 usb_probe_interface+0x5c0/0xaf0 drivers/usb/core/driver.c:396 really_probe+0x2ab/0xcb0 drivers/base/dd.c:639 __driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785 driver_probe_device+0x50/0x420 drivers/base/dd.c:815 __device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943 bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429 __device_attach+0x359/0x570 drivers/base/dd.c:1015 bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489 device_add+0xb48/0xfd0 drivers/base/core.c:3696 usb_set_configuration+0x19dd/0x2020 drivers/usb/core/message.c:2165 usb_generic_driver_probe+0x84/0x140 drivers/usb/core/generic.c:238 usb_probe_device+0x130/0x260 drivers/usb/core/driver.c:293 really_probe+0x2ab/0xcb0 drivers/base/dd.c:639 __driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785 driver_probe_device+0x50/0x420 drivers/base/dd.c:815 __device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943 bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429 __device_attach+0x359/0x570 drivers/base/dd.c:1015 bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489 device_add+0xb48/0xfd0 drivers/base/core.c:3696 usb_new_device+0xbdd/0x18f0 drivers/usb/core/hub.c:2620 hub_port_connect drivers/usb/core/hub.c:5477 [inline] hub_port_connect_change drivers/usb/core/hub.c:5617 [inline] port_event drivers/usb/core/hub.c:5773 [inline] hub_event+0x2efe/0x5730 drivers/usb/core/hub.c:5855 process_one_work+0x8a9/0x11d0 kernel/workqueue.c:2292 worker_thread+0xa47/0x1200 kernel/workqueue.c:2439 kthread+0x28d/0x320 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> ================================================================ Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 68d57a07bfe5 ("wireless: add plfxlc driver for pureLiFi X, XL, XC devices") Reported-by: syzbot+7d4f142f6c288de8abfe@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7d4f142f6c288de8abfe Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru> Link: https://patch.msgid.link/20250321185226.71-2-m.masimov@mt-integration.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23wifi: iwlwifi: fix the check for the SCRATCH register upon resumeEmmanuel Grumbach
We can't rely on the SCRATCH register being 0 on platform that power gate the NIC in S3. Even in those platforms, the SCRATCH register is still returning 0x1010000. Make sure that we understand that those platforms have powered off the device. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219597 Fixes: cb347bd29d0d ("wifi: iwlwifi: mvm: fix hibernation") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250420095642.a7e082ee785c.I9418d76f860f54261cfa89e1f7ac10300904ba40@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23wifi: iwlwifi: don't warn if the NIC is gone in resumeEmmanuel Grumbach
Some BIOSes decide to power gate the WLAN device during S3. Since iwlwifi doesn't expect this, it gets very noisy reporting that the device is no longer available. Wifi is still available because iwlwifi recovers, but it spews scary prints in the log. Fix that by failing gracefully. Fixes: e8bb19c1d590 ("wifi: iwlwifi: support fast resume") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219597 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250420095642.d8d58146c829.I569ca15eaaa774d633038a749cc6ec7448419714@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23wifi: iwlwifi: mld: fix BAID validity checkJohannes Berg
Perhaps IWL_FW_CHECK() is a bit misnamed, but it just returns the value of the inner condition. Therefore, the current code skips the actual function when it has the BAID data and makes it crash later when it doesn't. Fix the logic. Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250420095642.9c0b84c44c3b.Ied236258854b149960eb357ec61bf3a572503fbc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23wifi: iwlwifi: back off on continuous errorsJohannes Berg
When errors occur repeatedly, the driver shouldn't go into a tight loop trying to reset the device. Implement the backoff I had already defined IWL_TRANS_RESET_DELAY for, but clearly forgotten the implementation of. Fixes: 9a2f13c40c63 ("wifi: iwlwifi: implement reset escalation") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250420095642.8816e299efa2.I82cde34e2345a2b33b1f03dbb040f5ad3439a5aa@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23wifi: iwlwifi: mld: only create debugfs symlink if it does not existBenjamin Berg
When mac80211 switches between non-MLO and MLO it will recreate the debugfs directories. This results in the add_if_debugfs handler being called multiple times. As the convenience symlink is created in the mld debugfs directory and not the vif, it will not be removed by mac80211 when this happens and still exists. Add a check and only create the convenience symlink if we have not yet done so. Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250420095642.2490696f032a.I74319c7cf18f7e16a3d331cb96e38504b9fbab66@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23wifi: iwlwifi: mld: inform trans on init failureMiri Korenblit
If starting the op mode failed, the opmode memory is being freed, so trans->op_mode needs to be NULLified. Otherwise, trans will access already freed memory. Call iwl_trans_op_mode_leave in that case. Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250420095642.3331d1686556.Ifaf15bdd8ef8c59e04effbd2e7aa0034b30eeacb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23wifi: iwlwifi: mld: properly handle async notification in op mode startMiri Korenblit
From the moment that we have ALIVE, we can receive notification that are handled asynchronously. Some notifications (for example iwl_rfi_support_notif) requires an operational FW. So we need to make sure that they were handled in iwl_op_mode_mld_start before we stop the FW. Flush the async_handlers_wk there to achieve that. Also, if loading the FW in op mode start failed, we need to cancel these notifications, as they are from a dead FW. More than that, not doing so can cause us to access freed memory if async_handlers_wk is executed after ieee80211_free_hw is called. Fix this by canceling all async notifications if a failure occurred in init (after ALIVE). Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250420095642.1a8579662437.Ifd77d9c1a29fdd278b0a7bfc2709dd5d5e5efdb1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23Revert "wifi: iwlwifi: make no_160 more generic"Miri Korenblit
This reverts commit 75a3313f52b7e08e7e73746f69a68c2b7c28bb2b. The indication of the BW limitation in the sub-device ID is not applicable for Killer devices. For those devices, bw_limit will hold a random value, so a matching dev_info might not be found, which leads to a probe failure. Until it is properly fixed, revert this. Reported-by: Todd Brandt <todd.e.brandt@intel.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220029 Fixes: 75a3313f52b7 ("wifi: iwlwifi: make no_160 more generic") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250420115541.36dd3007151e.I66b6b78db09bfea12ae84dd85603cf1583271474@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23Revert "wifi: iwlwifi: add support for BE213"Miri Korenblit
This reverts commit 16a8d9a739430bec9c11eda69226c5a39f3478aa. This device needs commit 75a3313f52b7 ("wifi: iwlwifi: make no_160 more generic"), which has a bug and is being reverted until it is fixed. Since this device wasn't shipped yet it is ok to not support it. Reported-by: Todd Brandt <todd.e.brandt@intel.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220029 Fixes: 16a8d9a73943 ("wifi: iwlwifi: add support for BE213") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250420115541.581160ae3e4b.Icecc46baee8a797c00ad04fab92d7d1114b84829@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-23dm-integrity: fix a warning on invalid table lineMikulas Patocka
If we use the 'B' mode and we have an invalit table line, cancel_delayed_work_sync would trigger a warning. This commit avoids the warning. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org
2025-04-23dm-bufio: don't schedule in atomic contextLongPing Wei
A BUG was reported as below when CONFIG_DEBUG_ATOMIC_SLEEP and try_verify_in_tasklet are enabled. [ 129.444685][ T934] BUG: sleeping function called from invalid context at drivers/md/dm-bufio.c:2421 [ 129.444723][ T934] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 934, name: kworker/1:4 [ 129.444740][ T934] preempt_count: 201, expected: 0 [ 129.444756][ T934] RCU nest depth: 0, expected: 0 [ 129.444781][ T934] Preemption disabled at: [ 129.444789][ T934] [<ffffffd816231900>] shrink_work+0x21c/0x248 [ 129.445167][ T934] kernel BUG at kernel/sched/walt/walt_debug.c:16! [ 129.445183][ T934] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP [ 129.445204][ T934] Skip md ftrace buffer dump for: 0x1609e0 [ 129.447348][ T934] CPU: 1 PID: 934 Comm: kworker/1:4 Tainted: G W OE 6.6.56-android15-8-o-g6f82312b30b9-debug #1 1400000003000000474e5500b3187743670464e8 [ 129.447362][ T934] Hardware name: Qualcomm Technologies, Inc. Parrot QRD, Alpha-M (DT) [ 129.447373][ T934] Workqueue: dm_bufio_cache shrink_work [ 129.447394][ T934] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 129.447406][ T934] pc : android_rvh_schedule_bug+0x0/0x8 [sched_walt_debug] [ 129.447435][ T934] lr : __traceiter_android_rvh_schedule_bug+0x44/0x6c [ 129.447451][ T934] sp : ffffffc0843dbc90 [ 129.447459][ T934] x29: ffffffc0843dbc90 x28: ffffffffffffffff x27: 0000000000000c8b [ 129.447479][ T934] x26: 0000000000000040 x25: ffffff804b3d6260 x24: ffffffd816232b68 [ 129.447497][ T934] x23: ffffff805171c5b4 x22: 0000000000000000 x21: ffffffd816231900 [ 129.447517][ T934] x20: ffffff80306ba898 x19: 0000000000000000 x18: ffffffc084159030 [ 129.447535][ T934] x17: 00000000d2b5dd1f x16: 00000000d2b5dd1f x15: ffffffd816720358 [ 129.447554][ T934] x14: 0000000000000004 x13: ffffff89ef978000 x12: 0000000000000003 [ 129.447572][ T934] x11: ffffffd817a823c4 x10: 0000000000000202 x9 : 7e779c5735de9400 [ 129.447591][ T934] x8 : ffffffd81560d004 x7 : 205b5d3938373434 x6 : ffffffd8167397c8 [ 129.447610][ T934] x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffffffc0843db9e0 [ 129.447629][ T934] x2 : 0000000000002f15 x1 : 0000000000000000 x0 : 0000000000000000 [ 129.447647][ T934] Call trace: [ 129.447655][ T934] android_rvh_schedule_bug+0x0/0x8 [sched_walt_debug 1400000003000000474e550080cce8a8a78606b6] [ 129.447681][ T934] __might_resched+0x190/0x1a8 [ 129.447694][ T934] shrink_work+0x180/0x248 [ 129.447706][ T934] process_one_work+0x260/0x624 [ 129.447718][ T934] worker_thread+0x28c/0x454 [ 129.447729][ T934] kthread+0x118/0x158 [ 129.447742][ T934] ret_from_fork+0x10/0x20 [ 129.447761][ T934] Code: ???????? ???????? ???????? d2b5dd1f (d4210000) [ 129.447772][ T934] ---[ end trace 0000000000000000 ]--- dm_bufio_lock will call spin_lock_bh when try_verify_in_tasklet is enabled, and __scan will be called in atomic context. Fixes: 7cd326747f46 ("dm bufio: remove dm_bufio_cond_resched()") Signed-off-by: LongPing Wei <weilongping@oppo.com> Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-04-23pinctrl: mediatek: common-v1: Fix error checking in mtk_eint_init()Dan Carpenter
The devm_kzalloc() function doesn't return error pointers, it returns NULL on error. Then on the next line it checks the same pointer again by mistake, "->base" instead of "->base[0]". Fixes: fe412e3a6c97 ("pinctrl: mediatek: common-v1: Fix EINT breakage on older controllers") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/aAijc10fHka1WAMX@stanley.mountain Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-23platform/x86: ideapad-laptop: add support for some new buttonsGašper Nemgar
Add entries to unsupported WMI codes in ideapad_keymap[] and one check for WMI code 0x13d to trigger platform_profile_cycle(). Signed-off-by: Gašper Nemgar <gasper.nemgar@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20250418070738.7171-1-gasper.nemgar@gmail.com [ij: joined nested if ()s & major tweaks to changelog] Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-23platform/x86: asus-wmi: Disable OOBE state after resume from hibernationPavel Nikulin
ASUS firmware resets OOBE state during S4 suspend, so the keyboard blinks during resume from hibernation. This patch disables OOBE state after resume from hibernation. Signed-off-by: Pavel Nikulin <pavel@noa-labs.com> Link: https://lore.kernel.org/r/20250418140706.1691-1-pavel@noa-labs.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-23platform/x86: alienware-wmi-wmax: Add support for Alienware m15 R7Kurt Borja
Extend thermal control support to Alienware m15 R7. Cc: stable@vger.kernel.org Tested-by: Romain THERY <romain.thery@ik.me> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250419-m15-r7-v1-1-18c6eaa27e25@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-23platform/x86/intel: hid: Add Pantherlake supportSaranya Gopal
Add Pantherlake ACPI device ID to the Intel HID driver. While there, clean up the device ID table to remove the ", 0" parts. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Saranya Gopal <saranya.gopal@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250421041332.830136-1-saranya.gopal@intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-04-23pinctrl: mediatek: Fix new design debounce issueHao Chang
Calculate the true offset of eint according to index. Fixes: 3ef9f710efcb ("pinctrl: mediatek: Add EINT support for multiple addresses") Signed-off-by: Hao Chang <ot_chhao.chang@mediatek.com> Signed-off-by: Qingliang Li <qingliang.li@mediatek.com> Link: https://lore.kernel.org/20250422075216.14073-1-ot_chhao.chang@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-22net: ethernet: mtk_eth_soc: net: revise NETSYSv3 hardware configurationBo-Cun Chen
Change hardware configuration for the NETSYSv3. - Enable PSE dummy page mechanism for the GDM1/2/3 - Enable PSE drop mechanism when the WDMA Rx ring full - Enable PSE no-drop mechanism for packets from the WDMA Tx - Correct PSE free drop threshold - Correct PSE CDMA high threshold Fixes: 1953f134a1a8b ("net: ethernet: mtk_eth_soc: add NETSYS_V3 version support") Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/b71f8fd9d4bb69c646c4d558f9331dd965068606.1744907886.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-23crypto: atmel-sha204a - Set hwrng quality to lowest possibleMarek Behún
According to the review by Bill Cox [1], the Atmel SHA204A random number generator produces random numbers with very low entropy. Set the lowest possible entropy for this chip just to be safe. [1] https://www.metzdowd.com/pipermail/cryptography/2014-December/023858.html Fixes: da001fb651b00e1d ("crypto: atmel-i2c - add support for SHA204A random number generator") Cc: <stable@vger.kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2025-04-22virtio-net: disable delayed refill when pausing rxBui Quang Minh
When pausing rx (e.g. set up xdp, xsk pool, rx resize), we call napi_disable() on the receive queue's napi. In delayed refill_work, it also calls napi_disable() on the receive queue's napi. When napi_disable() is called on an already disabled napi, it will sleep in napi_disable_locked while still holding the netdev_lock. As a result, later napi_enable gets stuck too as it cannot acquire the netdev_lock. This leads to refill_work and the pause-then-resume tx are stuck altogether. This scenario can be reproducible by binding a XDP socket to virtio-net interface without setting up the fill ring. As a result, try_fill_recv will fail until the fill ring is set up and refill_work is scheduled. This commit adds virtnet_rx_(pause/resume)_all helpers and fixes up the virtnet_rx_resume to disable future and cancel all inflights delayed refill_work before calling napi_disable() to pause the rx. Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()") Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20250417072806.18660-2-minhquangbui99@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-22net: phy: leds: fix memory leakQingfang Deng
A network restart test on a router led to an out-of-memory condition, which was traced to a memory leak in the PHY LED trigger code. The root cause is misuse of the devm API. The registration function (phy_led_triggers_register) is called from phy_attach_direct, not phy_probe, and the unregister function (phy_led_triggers_unregister) is called from phy_detach, not phy_remove. This means the register and unregister functions can be called multiple times for the same PHY device, but devm-allocated memory is not freed until the driver is unbound. This also prevents kmemleak from detecting the leak, as the devm API internally stores the allocated pointer. Fix this by replacing devm_kzalloc/devm_kcalloc with standard kzalloc/kcalloc, and add the corresponding kfree calls in the unregister path. Fixes: 3928ee6485a3 ("net: phy: leds: Add support for "link" trigger") Fixes: 2e0bc452f472 ("net: phy: leds: add support for led triggers on phy link state change") Signed-off-by: Hao Guan <hao.guan@siflower.com.cn> Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250417032557.2929427-1-dqfext@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-22net: phylink: fix suspend/resume with WoL enabled and link downRussell King (Oracle)
When WoL is enabled, we update the software state in phylink to indicate that the link is down, and disable the resolver from bringing the link back up. On resume, we attempt to bring the overall state into consistency by calling the .mac_link_down() method, but this is wrong if the link was already down, as phylink strictly orders the .mac_link_up() and .mac_link_down() methods - and this would break that ordering. Fixes: f97493657c63 ("net: phylink: add suspend/resume support") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1u55Qf-0016RN-PA@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-22drm/amd/display: do not copy invalid CRTC timing infoGergo Koteles
Since b255ce4388e0, it is possible that the CRTC timing information for the preferred mode has not yet been calculated while amdgpu_dm_connector_mode_valid() is running. In this case use the CRTC timing information of the actual mode. Fixes: b255ce4388e0 ("drm/amdgpu: don't change mode in amdgpu_dm_connector_mode_valid()") Closes: https://lore.kernel.org/all/ed09edb167e74167a694f4854102a3de6d2f1433.camel@irl.hu/ Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4085 Signed-off-by: Gergo Koteles <soyer@irl.hu> Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 20232192a5044d1f66dcbef0a24de1bb8157738d) Cc: stable@vger.kernel.org
2025-04-22drm/amd/display: Default IPS to RCG_IN_ACTIVE_IPS2_IN_OFFLeo Li
[Why] Recent findings show negligible power savings between IPS2 and RCG during static desktop. In fact, DCN related clocks are higher when IPS2 is enabled vs RCG. RCG_IN_ACTIVE is also the default policy for another OS supported by DC, and it has faster entry/exit. [How] Remove previous logic that checked for IPS2 support, and just default to `DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF`. Fixes: 199888aa25b3 ("drm/amd/display: Update IPS default mode for DCN35/DCN351") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 8f772d79ef39b463ead00ef6f009bebada3a9d49) Cc: stable@vger.kernel.org
2025-04-22drm/amd/display: Use 16ms AUX read interval for LTTPR with old sinksGeorge Shen
[Why/How] LTTPR are required to program DPCD 0000Eh to 0x4 (16ms) upon AUX read reply to this register. Since old Sinks witih DPCD rev 1.1 and earlier may not support this register, assume the mandatory value is programmed by the LTTPR to avoid AUX timeout issues. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 1594b60d74959c0680ddf777a74963c98afcdd7e)
2025-04-22drm/amd/display: Fix ACPI edid parsing on some Lenovo systemsMario Limonciello
[Why] The ACPI EDID in the BIOS of a Lenovo laptop includes 3 blocks, but dm_helpers_probe_acpi_edid() has a start that is 'char'. The 3rd block index starts after 255, so it can't be indexed properly. This leads to problems with the display when the EDID is parsed. [How] Change the variable type to 'short' so that larger values can be indexed. Cc: Renjith Pananchikkal <renjith.pananchikkal@amd.com> Reported-by: Mark Pearson <mpearson@lenovo.com> Suggested-by: David Ober <dober@lenovo.com> Fixes: c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP") Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit a918bb4a90d423ced2976a794f2724c362c1f063) Cc: stable@vger.kernel.org
2025-04-22drm/amdgpu: Allow P2P access through XGMIFelix Kuehling
If peer memory is accessible through XGMI, allow leaving it in VRAM rather than forcing its migration to GTT on DMABuf attachment. Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Tested-by: Hao (Claire) Zhou <hao.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 372c8d72c3680fdea3fbb2d6b089f76b4a6d596a)
generated by cgit (git 2.34.1) at 2025-09-11 16:50:48 +0000