| Age | Commit message (Collapse) | Author |
|---|
|
In commit 7e71b85473f8 ("arm64: dts: ls1028a: fix node name for the
sysclk") the sysclk node name was renamed and broke the erratum
workaround because it tries to fetch a device tree node by its name,
which is very fragile in general. We don't even need the sysclk node
because the only possible sysclk frequency input is 100MHz. In fact, the
erratum says it applies if SYS_PLL_RAT is 3, not that the platform clock
is 300 MHz. Make the workaround more reliable and just drop the unneeded
sysclk lookup.
For reference, the error during the bootup is the following:
[ 4.898400] nxp-fspi 20c0000.spi: Errata cannot be executed. Read via IP bus may not work
Fixes: 82ce7d0e74b6 ("spi: spi-nxp-fspi: Implement errata workaround for LS1028A")
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20211001212726.159437-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 2d26f6e39afb ("net: stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warnings")
while getting rid of a runtime PM warning ended up breaking ethernet
on rk3399 based devices. By dropping an extra reference to the device,
the commit ends up enabling suspend / resume of the ethernet device -
which appears to be broken.
While the issue with runtime pm is being investigated, partially
revert commit 2d26f6e39afb to restore the network on rk3399.
Fixes: 2d26f6e39afb ("net: stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warnings")
Suggested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
Cc: Michael Riesch <michael.riesch@wolfvision.net>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210929135049.3426058-1-punitagrawal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When ocelot_flower.c calls ocelot_vcap_filter_add(), the filter has a
given filter->id.cookie. This filter is added to the block->rules list.
However, when ocelot_flower.c calls ocelot_vcap_block_find_filter_by_id()
which passes the cookie as argument, the filter is never found by
filter->id.cookie when searching through the block->rules list.
This is unsurprising, since the filter->id.cookie is an unsigned long,
but the cookie argument provided to ocelot_vcap_block_find_filter_by_id()
is a signed int, and the comparison fails.
Fixes: 50c6cc5b9283 ("net: mscc: ocelot: store a namespaced VCAP filter ID")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210930125330.2078625-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The overflow check does causes a warning from clang-14 when 'sz' is a type
that is smaller than size_t:
drivers/gpu/drm/msm/msm_gem_submit.c:217:10: error: result of comparison of constant 18446744073709551615 with expression of type 'unsigned int' is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (sz == SIZE_MAX) {
Change the type accordingly.
Fixes: 20224d715a88 ("drm/msm/submit: Move copy_from_user ahead of locking bos")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210927113632.3849987-1-arnd@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fix from Vasily Gorbik:
"One fix for 5.15-rc4: Avoid CIO excessive path-verification requests,
which might cause unwanted delays"
* tag 's390-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: avoid excessive path-verification requests
|
|
Some userspace apps make assumptions that rendering against multiple
contexts within the same process (from the same thread, with appropriate
MakeCurrent() calls) provides sufficient synchronization without any
external synchronization (ie. glFenceSync()/glWaitSync()). Since a
submitqueue maps to a gl/vk context, having multiple sched entities of
the same priority only works with implicit sync enabled.
To fix this, limit things to a single sched entity per priority level
per process.
An alternative would be sharing submitqueues between contexts in
userspace, but tracking of per-context faults (ie. GL_EXT_robustness)
is already done at the submitqueue level, so this is not an option.
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
msm_file_private is more gpu related, and in the next commit it will
need access to other GPU specific #defines. While we're at it, add
some comments.
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
In theory a context can be destroyed and a new one allocated at the same
address, making the pointer comparision to detect when we don't need to
update the current pagetables invalid. Instead assign a sequence number
to each context on creation, and use this for the check.
Fixes: 84c31ee16f90 ("drm/msm/a6xx: Add support for per-instance pagetables")
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
I've seen some crashes in our crash reporting that *look* like multiple
threads stomping on each other while communicating with GMU. So wrap
all those paths in a lock.
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
If the device file was opened prior to fw being available (such as from
initrd before rootfs is mounted, when the initrd does not contain GPU
fw), that would cause a later crash when the dev file is closed due to
unitialized submitqueues list:
CPU: 4 PID: 263 Comm: plymouthd Tainted: G W 5.15.0-rc2-next-20210924 #2
Hardware name: LENOVO 81JL/LNVNB161216, BIOS 9UCN33WW(V2.06) 06/ 4/2019
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : msm_submitqueue_close+0x30/0x190 [msm]
lr : msm_postclose+0x54/0xf0 [msm]
sp : ffff80001074bb80
x29: ffff80001074bb80 x28: ffff03ad80c4db80 x27: ffff03ad80dc5ab0
x26: 0000000000000000 x25: ffff03ad80dc5af8 x24: ffff03ad81e90800
x23: 0000000000000000 x22: ffff03ad81e90800 x21: ffff03ad8b35e788
x20: ffff03ad81e90878 x19: 0000000000000000 x18: 0000000000000000
x17: 0000000000000000 x16: ffffda15f14f7940 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000040
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffda15cd18ff88
x8 : ffff03ad80c4db80 x7 : 0000000000000228 x6 : 0000000000000000
x5 : 1793a4e807e636bd x4 : ffff03ad80c4db80 x3 : ffff03ad81e90878
x2 : 0000000000000000 x1 : ffff03ad80c4db80 x0 : 0000000000000000
Call trace:
msm_submitqueue_close+0x30/0x190 [msm]
msm_postclose+0x54/0xf0 [msm]
drm_file_free.part.0+0x1cc/0x2e0 [drm]
drm_close_helper.isra.0+0x74/0x84 [drm]
drm_release+0x78/0x120 [drm]
__fput+0x78/0x23c
____fput+0x1c/0x30
task_work_run+0xcc/0x22c
do_exit+0x304/0x9f4
do_group_exit+0x44/0xb0
__wake_up_parent+0x0/0x3c
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x4c/0xf4
do_el0_svc+0x30/0x9c
el0_svc+0x20/0x60
el0t_64_sync_handler+0xe8/0xf0
el0t_64_sync+0x1a0/0x1a4
Code: aa0003f5 a90153f3 f8408eb3 aa1303e0 (f85e8674)
---[ end trace 39b2fa37509a2be2 ]---
Fixing recursive fault but reboot is needed!
Fixes: 86c2a0f000c1 drm/msm: ("Small submitqueue creation cleanup")
Reported-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
In the function 'mtk_spi_set_hw_cs_timing'
the 'setup', 'hold' and 'inactive' delays are configured.
In case those values are 0 it causes errors on mt8173:
cros-ec-i2c-tunnel 1100a000.spi:ec@0:i2c-tunnel0:
Error transferring EC i2c message -71
cros-ec-spi spi0.0: EC failed to respond in time.
This patch fixes that issues by setting only the values
that are not 0.
Fixes: 04e6bb0d6bb1 ("spi: modify set_cs_timing parameter")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Link: https://lore.kernel.org/r/20211001152153.4604-1-dafna.hirschfeld@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
atmel_spi_dma_map_xfer to never be called in PDC mode. This causes the
driver to silently fail.
This patch changes the conditional to match the behaviour of the
previous commit before the refactor.
Fixes: 5fa5e6dec762 ("spi: atmel: Switch to transfer_one transfer method")
Signed-off-by: Ville Baillie <villeb@bytesnap.co.uk>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210921072132.21831-1-villeb@bytesnap.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull more kvm fixes from Paolo Bonzini:
"Small x86 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Ensure all migrations are performed when test is affined
KVM: x86: Swap order of CPUID entry "index" vs. "significant flag" checks
ptp: Fix ptp_kvm_getcrosststamp issue for x86 ptp_kvm
x86/kvmclock: Move this_cpu_pvti into kvmclock.h
selftests: KVM: Don't clobber XMM register when read
KVM: VMX: Fix a TSX_CTRL_CPUID_CLEAR field mask issue
|
|
Pull drm fixes from Daniel Vetter:
"Dave is out on a long w/e, should be back next week.
Nothing nefarious, just a bunch of driver fixes: amdgpu, i915, tegra,
and one exynos driver fix"
* tag 'drm-fixes-2021-10-01' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: force exit gfxoff on sdma resume for rmb s0ix
drm/amdgpu: check tiling flags when creating FB on GFX8-
drm/amd/display: Pass PCI deviceid into DC
drm/amd/display: initialize backlight_ramping_override to false
drm/amdgpu: correct initial cp_hqd_quantum for gfx9
drm/amd/display: Fix Display Flicker on embedded panels
drm/amdgpu: fix gart.bo pin_count leak
drm/i915: Remove warning from the rps worker
drm/i915/request: fix early tracepoints
drm/i915/guc, docs: Fix pdfdocs build error by removing nested grid
gpu: host1x: Plug potential memory leak
gpu/host1x: fence: Make spinlock static
drm/tegra: uapi: Fix wrong mapping end address in case of disabled IOMMU
drm/tegra: dc: Remove unused variables
drm/exynos: Make use of the helper function devm_platform_ioremap_resource()
drm/i915/gvt: fix the usage of ww lock in gvt scheduler.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Two fixes for the new Apple DART driver to fix a kernel panic and a
stale data usage issue
- Intel VT-d fix for how PCI device ids are printed
* tag 'iommu-fixes-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/dart: Clear sid2group entry when a group is freed
iommu/vt-d: Drop "0x" prefix from PCI bus & device addresses
iommu/dart: Remove iommu_flush_ops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
One cleanup
- Use devm_platform_ioremap_resource() helper function instead of old
one.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928074158.2942-1-inki.dae@samsung.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.15-2021-09-29:
amdgpu:
- gart pin count fix
- eDP flicker fix
- GFX9 MQD fix
- Display fixes
- Tiling flags fix for pre-GFX9
- SDMA resume fix for S0ix
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930023013.5207-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.15-rc4:
- Fix GVT scheduler ww lock usage
- Fix pdfdocs documentation build
- Fix request early tracepoints
- Fix an invalid warning from rps worker
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87lf3ev44z.fsf@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
mlx5-fixes-2021-09-30
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
wireless-drivers fixes for v5.15
Second set of fixes for v5.15, nothing major this time. Most important
here are reverting a brcmfmac regression and a fix for an old rare
ath5k build error.
iwlwifi
* fixes to NULL dereference, off by one and missing unlock
* add support for Killer AX1650 on Dell XPS 15 (9510) laptop
ath5k
* build fix with LEDS=m
brcmfmac
* revert a regression causing BCM4359/9 devices stop working as access point
mwifiex
* fix clang warning about null pointer arithmetic
|
|
Syzbot reported memory leak in MDIO bus interface, the problem was in
wrong state logic.
MDIOBUS_ALLOCATED indicates 2 states:
1. Bus is only allocated
2. Bus allocated and __mdiobus_register() fails, but
device_register() was called
In case of device_register() has been called we should call put_device()
to correctly free the memory allocated for this device, but mdiobus_free()
calls just kfree(dev) in case of MDIOBUS_ALLOCATED state
To avoid this behaviour we need to set bus->state to MDIOBUS_UNREGISTERED
_before_ calling device_register(), because put_device() should be
called even in case of device_register() failure.
Link: https://lore.kernel.org/netdev/YVMRWNDZDUOvQjHL@shell.armlinux.org.uk/
Fixes: 46abc02175b3 ("phylib: give mdio buses a device tree presence")
Reported-and-tested-by: syzbot+398e7dc692ddbbb4cfec@syzkaller.appspotmail.com
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/eceae1429fbf8fa5c73dd2a0d39d525aa905074d.1633024062.git.paskripkin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit ab609f25d19858513919369ff3d9a63c02cd9e2e.
This patch is correct in the sense that we _should_ call device_put() in
case of device_register() failure, but the problem in this code is more
vast.
We need to set bus->state to UNMDIOBUS_REGISTERED before calling
device_register() to correctly release the device in mdiobus_free().
This patch prevents us from doing it, since in case of device_register()
failure put_device() will be called 2 times and it will cause UAF or
something else.
Also, Reported-by: tag in revered commit was wrong, since syzbot
reported different leak in same function.
Link: https://lore.kernel.org/netdev/20210928092657.GI2048@kadam/
Acked-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/f12fb1faa4eccf0f355788225335eb4309ff2599.1633024062.git.paskripkin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from mac80211, netfilter and bpf.
Current release - regressions:
- bpf, cgroup: assign cgroup in cgroup_sk_alloc when called from
interrupt
- mdio: revert mechanical patches which broke handling of optional
resources
- dev_addr_list: prevent address duplication
Previous releases - regressions:
- sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb
(NULL deref)
- Revert "mac80211: do not use low data rates for data frames with no
ack flag", fixing broadcast transmissions
- mac80211: fix use-after-free in CCMP/GCMP RX
- netfilter: include zone id in tuple hash again, minimize collisions
- netfilter: nf_tables: unlink table before deleting it (race -> UAF)
- netfilter: log: work around missing softdep backend module
- mptcp: don't return sockets in foreign netns
- sched: flower: protect fl_walk() with rcu (race -> UAF)
- ixgbe: fix NULL pointer dereference in ixgbe_xdp_setup
- smsc95xx: fix stalled rx after link change
- enetc: fix the incorrect clearing of IF_MODE bits
- ipv4: fix rtnexthop len when RTA_FLOW is present
- dsa: mv88e6xxx: 6161: use correct MAX MTU config method for this
SKU
- e100: fix length calculation & buffer overrun in ethtool::get_regs
Previous releases - always broken:
- mac80211: fix using stale frag_tail skb pointer in A-MSDU tx
- mac80211: drop frames from invalid MAC address in ad-hoc mode
- af_unix: fix races in sk_peer_pid and sk_peer_cred accesses (race
-> UAF)
- bpf, x86: Fix bpf mapping of atomic fetch implementation
- bpf: handle return value of BPF_PROG_TYPE_STRUCT_OPS prog
- netfilter: ip6_tables: zero-initialize fragment offset
- mhi: fix error path in mhi_net_newlink
- af_unix: return errno instead of NULL in unix_create1() when over
the fs.file-max limit
Misc:
- bpf: exempt CAP_BPF from checks against bpf_jit_limit
- netfilter: conntrack: make max chain length random, prevent
guessing buckets by attackers
- netfilter: nf_nat_masquerade: make async masq_inet6_event handling
generic, defer conntrack walk to work queue (prevent hogging RTNL
lock)"
* tag 'net-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
af_unix: fix races in sk_peer_pid and sk_peer_cred accesses
net: stmmac: fix EEE init issue when paired with EEE capable PHYs
net: dev_addr_list: handle first address in __hw_addr_add_ex
net: sched: flower: protect fl_walk() with rcu
net: introduce and use lock_sock_fast_nested()
net: phy: bcm7xxx: Fixed indirect MMD operations
net: hns3: disable firmware compatible features when uninstall PF
net: hns3: fix always enable rx vlan filter problem after selftest
net: hns3: PF enable promisc for VF when mac table is overflow
net: hns3: fix show wrong state when add existing uc mac address
net: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLE
net: hns3: don't rollback when destroy mqprio fail
net: hns3: remove tc enable checking
net: hns3: do not allow call hns3_nic_net_open repeatedly
ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup
net: bridge: mcast: Associate the seqcount with its protecting lock.
net: mdio-ipq4019: Fix the error for an optional regs resource
net: hns3: fix hclge_dbg_dump_tm_pg() stack usage
net: mdio: mscc-miim: Fix the mdio controller
af_unix: Return errno instead of NULL in unix_create1().
...
|
|
TX-port-TS hijacks the PTP traffic to a specific HW TX-queue. This
conflicts with MQPRIO in channel mode, which specifies explicitly which
TC accepts the packet. This patch mutually excludes the above
configuration.
Fixes: ec60c4581bd9 ("net/mlx5e: Support MQPRIO channel mode")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
PTP-RQ counters title format contains PTP-RQ identifier, which is
mistakenly not passed to sprinft().
This leads to unexpected garbage values instead.
This patch fixes it.
Before applying the patch:
ethtool -S eth3 | grep ptp_rq
ptp_rq15_packets: 0
ptp_rq8_bytes: 0
ptp_rq6_csum_complete: 0
ptp_rq14_csum_complete_tail: 0
ptp_rq3_csum_complete_tail_slow : 0
ptp_rq9_csum_unnecessary: 0
ptp_rq1_csum_unnecessary_inner: 0
ptp_rq7_csum_none: 0
ptp_rq10_xdp_drop: 0
ptp_rq9_xdp_redirect: 0
ptp_rq13_lro_packets: 0
ptp_rq12_lro_bytes: 0
ptp_rq10_ecn_mark: 0
ptp_rq9_removed_vlan_packets: 0
ptp_rq5_wqe_err: 0
ptp_rq8_mpwqe_filler_cqes: 0
ptp_rq2_mpwqe_filler_strides: 0
ptp_rq5_oversize_pkts_sw_drop: 0
ptp_rq6_buff_alloc_err: 0
ptp_rq15_cqe_compress_blks: 0
ptp_rq2_cqe_compress_pkts: 0
ptp_rq2_cache_reuse: 0
ptp_rq12_cache_full: 0
ptp_rq11_cache_empty: 256
ptp_rq12_cache_busy: 0
ptp_rq11_cache_waive: 0
ptp_rq12_congst_umr: 0
ptp_rq11_arfs_err: 0
ptp_rq9_recover: 0
After applying the patch:
ethtool -S eth3 | grep ptp_rq
ptp_rq0_packets: 0
ptp_rq0_bytes: 0
ptp_rq0_csum_complete: 0
ptp_rq0_csum_complete_tail: 0
ptp_rq0_csum_complete_tail_slow : 0
ptp_rq0_csum_unnecessary: 0
ptp_rq0_csum_unnecessary_inner: 0
ptp_rq0_csum_none: 0
ptp_rq0_xdp_drop: 0
ptp_rq0_xdp_redirect: 0
ptp_rq0_lro_packets: 0
ptp_rq0_lro_bytes: 0
ptp_rq0_ecn_mark: 0
ptp_rq0_removed_vlan_packets: 0
ptp_rq0_wqe_err: 0
ptp_rq0_mpwqe_filler_cqes: 0
ptp_rq0_mpwqe_filler_strides: 0
ptp_rq0_oversize_pkts_sw_drop: 0
ptp_rq0_buff_alloc_err: 0
ptp_rq0_cqe_compress_blks: 0
ptp_rq0_cqe_compress_pkts: 0
ptp_rq0_cache_reuse: 0
ptp_rq0_cache_full: 0
ptp_rq0_cache_empty: 256
ptp_rq0_cache_busy: 0
ptp_rq0_cache_waive: 0
ptp_rq0_congst_umr: 0
ptp_rq0_arfs_err: 0
ptp_rq0_recover: 0
Fixes: a28359e922c6 ("net/mlx5e: Add PTP-RX statistics")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When setting number of completion EQs of the SF, consider number of
online CPUs.
Without this consideration, when number of online cpus are less than 8,
unnecessary 8 completion EQs are allocated.
Fixes: c36326d38d93 ("net/mlx5: Round-Robin EQs over IRQs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The maximum irq_index can be 2047, This means irq_name should have 4
characters reserve for the irq_index. Hence, increase it to 4.
Fixes: 3af26495a247 ("net/mlx5: Enlarge interrupt field in CREATE_EQ")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When in Real-time mode, HW clock is synced with the PTP daemon. Hence
driver should not re-calibrate the next pulse (via MTPPSE repetitive
events mechanism).
This patch arms repetitive events only in free-running mode.
Fixes: 432119de33d9 ("net/mlx5: Add cyc2time HW translation mode support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Allow configuration of 1PPS start time only with time-stamp representing
a round second. Prior to this patch driver allowed setting of a
non-round-second which is not supported by the device. Avoid unexpected
behavior by restricting start-time configuration to a round-second.
Fixes: 4272f9b88db9 ("net/mlx5e: Change 1PPS out scheme")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Flow counter is allocated in eswitch legacy acl setting functions
without checking if already allocated by previous setting. Add a check
to avoid such double allocation.
Fixes: 07bab9502641 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes")
Fixes: ea651a86d468 ("net/mlx5: E-Switch, Refactor eswitch egress acl codes")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
* Add netdev->tc_to_txq rollback in case of failure in
mlx5e_update_netdev_queues().
* Fix broken transition between the two modes:
MQPRIO DCB mode with tc==8, and MQPRIO channel mode.
* Disable MQPRIO channel mode if re-attaching with a different number
of channels.
* Improve code sharing.
Fixes: ec60c4581bd9 ("net/mlx5e: Support MQPRIO channel mode")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The value for maximum number of channels is first calculated based
on the netdev's profile and current function resources (specifically,
number of MSIX vectors, which depends among other things on the number
of online cores in the system).
This value is then used to calculate the netdev's number of rxqs/txqs.
Once created (by alloc_etherdev_mqs), the number of netdev's rxqs/txqs
is constant and we must not exceed it.
To achieve this, keep the maximum number of channels in sync upon any
netdevice re-attach.
Use mlx5e_get_max_num_channels() for calculating the number of netdev's
rxqs/txqs. After netdev is created, use mlx5e_calc_max_nch() (which
coinsiders core device resources, profile, and netdev) to init or
update priv->max_nch.
Before this patch, the value of priv->max_nch might get out of sync,
mistakenly allowing accesses to out-of-bounds objects, which would
crash the system.
Track the number of channels stats structures used in a separate
field, as they are persistent to suspend/resume operations. All the
collected stats of every channel index that ever existed should be
preserved. They are reset only when struct mlx5e_priv is,
in mlx5e_priv_cleanup(), which is part of the profile changing flow.
There is no point anymore in blocking a profile change due to max_nch
mismatch in mlx5e_netdev_change_profile(). Remove the limitation.
Fixes: a1f240f18017 ("net/mlx5e: Adjust to max number of channles when re-attaching")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently in Rx data path IPsec crypto offloaded packets uses
csum_none flag, so checksum is handled by the stack, this naturally
have some performance/cpu utilization impact on such flows. As Nvidia
NIC starting from ConnectX6DX provides checksum complete value out of
the box also for such flows there is no sense in taking csum_none path,
furthermore the stack (xfrm) have the method to handle checksum complete
corrections for such flows i.e. IPsec trailer removal and consequently
checksum value adjustment.
Because of the above and in addition the ConnectX6DX is the first HW
which supports IPsec crypto offload then it is safe to report csum
complete for IPsec offloaded traffic.
Fixes: b2ac7541e377 ("net/mlx5e: IPsec: Add Connect-X IPsec Rx data path offload")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"A single fix for the gpio-pca953x driver and two commits updating the
MAINTAINERS entries for Mun Yew Tham (GPIO specific) and myself
(treewide after a change in professional situation).
Summary:
- don't ignore I2C errors in gpio-pca953x
- update MAINTAINERS entries for Mun Yew Tham and myself"
* tag 'gpio-fixes-for-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: Update Mun Yew Tham as Altera Pio Driver maintainer
MAINTAINERS: update my email address
gpio: pca953x: do not ignore i2c errors
|
|
Pull rdma fixes from Jason Gunthorpe:
"Not much too exciting here, although two syzkaller bugs that seem to
have 9 lives may have finally been squashed.
Several core bugs and a batch of driver bug fixes:
- Fix compilation problems in qib and hfi1
- Do not corrupt the joined multicast group state when using
SEND_ONLY
- Several CMA bugs, a reference leak for listening and two syzkaller
crashers
- Various bug fixes for irdma
- Fix a Sleeping while atomic bug in usnic
- Properly sanitize kernel pointers in dmesg
- Two bugs in the 64b CQE support for hns"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Add the check of the CQE size of the user space
RDMA/hns: Fix the size setting error when copying CQE in clean_cq()
RDMA/hfi1: Fix kernel pointer leak
RDMA/usnic: Lock VF with mutex instead of spinlock
RDMA/hns: Work around broken constant propagation in gcc 8
RDMA/cma: Ensure rdma_addr_cancel() happens before issuing more requests
RDMA/cma: Do not change route.addr.src_addr.ss_family
RDMA/irdma: Report correct WC error when there are MW bind errors
RDMA/irdma: Report correct WC error when transport retry counter is exceeded
RDMA/irdma: Validate number of CQ entries on create CQ
RDMA/irdma: Skip CQP ring during a reset
MAINTAINERS: Update Broadcom RDMA maintainers
RDMA/cma: Fix listener leak in rdma_cma_listen_on_all() failure
IB/cma: Do not send IGMP leaves for sendonly Multicast groups
IB/qib: Fix clang confusion of NULL pointer comparison
|
|
When STMMAC is paired with Energy-Efficient Ethernet(EEE) capable PHY,
and the PHY is advertising EEE by default, we need to enable EEE on the
xPCS side too, instead of having user to manually trigger the enabling
config via ethtool.
Fixed this by adding xpcs_config_eee() call in stmmac_eee_init().
Fixes: 7617af3d1a5e ("net: pcs: Introducing support for DWC xpcs Energy Efficient Ethernet")
Cc: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Starting with v5.15-rc1, we may now see some am335x beaglebone black
device produce the following error on pruss probe:
Unhandled fault: external abort on non-linefetch (0x1008) at 0xe0326000
This has started with the enabling of pruss for am335x in the dts files.
Turns out the is caused by the PRM reset handling not waiting for the
reset bit to clear. To fix the issue, let's always wait for the reset
bit to clear, even if there is a separate reset status register.
We attempted to fix a similar issue for dra7 iva with a udelay() in
commit effe89e40037 ("soc: ti: omap-prm: Fix occasional abort on reset
deassert for dra7 iva"). There is no longer a need for the udelay()
for dra7 iva reset either with the check added for reset bit clearing.
Cc: Drew Fustini <pdp7pdp7@gmail.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: "H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Robert Nelson <robertcnelson@gmail.com>
Cc: Yongqin Liu <yongqin.liu@linaro.org>
Fixes: effe89e40037 ("soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva")
Reported-by: Matti Vaittinen <mazziesaccount@gmail.com>
Tested-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
hv_clock is preallocated to have only HVC_BOOT_ARRAY_SIZE (64) elements;
if the PTP_SYS_OFFSET_PRECISE ioctl is executed on vCPUs whose index is
64 of higher, retrieving the struct pvclock_vcpu_time_info pointer with
"src = &hv_clock[cpu].pvti" will result in an out-of-bounds access and
a wild pointer. Change it to "this_cpu_pvti()" which is guaranteed to
be valid.
Fixes: 95a3d4454bb1 ("Switch kvmclock data to a PER_CPU variable")
Signed-off-by: Zelin Deng <zelin.deng@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Message-Id: <1632892429-101194-3-git-send-email-zelin.deng@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
commit fad7cd3310db ("nbd: add the check to prevent overflow in
__nbd_ioctl()") raised an issue from the fallback helpers added in
commit f0907827a8a9 ("compiler.h: enable builtin overflow checkers and
add fallback code")
ERROR: modpost: "__divdi3" [drivers/block/nbd.ko] undefined!
As Stephen Rothwell notes:
The added check_mul_overflow() call is being passed 64 bit values.
COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW is not set for this build (see
include/linux/overflow.h).
Specifically, the helpers for checking whether the results of a
multiplication overflowed (__unsigned_mul_overflow,
__signed_add_overflow) use the division operator when
!COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW. This is problematic for 64b
operands on 32b hosts.
This was fixed upstream by
commit 76ae847497bc ("Documentation: raise minimum supported version of
GCC to 5.1")
which is not suitable to be backported to stable.
Further, __builtin_mul_overflow() would emit a libcall to a
compiler-rt-only symbol when compiling with clang < 14 for 32b targets.
ld.lld: error: undefined symbol: __mulodi4
In order to keep stable buildable with GCC 4.9 and clang < 14, modify
struct nbd_config to instead track the number of bits of the block size;
reconstructing the block size using runtime checked shifts that are not
problematic for those compilers and in a ways that can be backported to
stable.
In nbd_set_size, we do validate that the value of blksize must be a
power of two (POT) and is in the range of [512, PAGE_SIZE] (both
inclusive).
This does modify the debugfs interface.
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://github.com/ClangBuiltLinux/linux/issues/1438
Link: https://lore.kernel.org/all/20210909182525.372ee687@canb.auug.org.au/
Link: https://lore.kernel.org/stable/CAHk-=whiQBofgis_rkniz8GBP9wZtSZdcDEffgSLO62BUGV3gg@mail.gmail.com/
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Suggested-by: Kees Cook <keescook@chromium.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210920232533.4092046-1-ndesaulniers@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Per gpio_chip interface, error shall be proparated to the caller.
Attempt to silent diagnostics by returning zero (as written in the
comment) is plain wrong, because the zero return can be interpreted by
the caller as the gpio value.
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This contains fixes for a resource leak in ccp as well as stack
corruption in x86/sm4"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86/sm4 - Fix frame pointer stack corruption
crypto: ccp - fix resource leaks in ccp_run_aes_gcm_cmd()
|
|
When EEE support was added to the 28nm EPHY it was assumed that it would
be able to support the standard clause 45 over clause 22 register access
method. It turns out that the PHY does not support that, which is the
very reason for using the indirect shadow mode 2 bank 3 access method.
Implement {read,write}_mmd to allow the standard PHY library routines
pertaining to EEE querying and configuration to work correctly on these
PHYs. This forces us to implement a __phy_set_clr_bits() function that
does not grab the MDIO bus lock since the PHY driver's {read,write}_mmd
functions are always called with that lock held.
Fixes: 83ee102a6998 ("net: phy: bcm7xxx: add support for 28nm EPHY")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the firmware compatible features are enabled in PF driver
initialization process, but they are not disabled in PF driver
deinitialization process and firmware keeps these features in enabled
status.
In this case, if load an old PF driver (for example, in VM) which not
support the firmware compatible features, firmware will still send mailbox
message to PF when link status changed and PF will print
"un-supported mailbox message, code = 201".
To fix this problem, disable these firmware compatible features in PF
driver deinitialization process.
Fixes: ed8fb4b262ae ("net: hns3: add link change event report")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the rx vlan filter will always be disabled before selftest and
be enabled after selftest as the rx vlan filter feature is fixed on in
old device earlier than V3.
However, this feature is not fixed in some new devices and it can be
disabled by user. In this case, it is wrong if rx vlan filter is enabled
after selftest. So fix it.
Fixes: bcc26e8dc432 ("net: hns3: remove unused code in hns3_self_test()")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If unicast mac address table is full, and user add a new mac address, the
unicast promisc needs to be enabled for the new unicast mac address can be
used. So does the multicast promisc.
Now this feature has been implemented for PF, and VF should be implemented
too. When the mac table of VF is overflow, PF will enable promisc for this
VF.
Fixes: 1e6e76101fd9 ("net: hns3: configure promisc mode for VF asynchronously")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, if function adds an existing unicast mac address, eventhough
driver will not add this address into hardware, but it will return 0 in
function hclge_add_uc_addr_common(). It will cause the state of this
unicast mac address is ACTIVE in driver, but it should be in TO-ADD state.
To fix this problem, function hclge_add_uc_addr_common() returns -EEXIST
if mac address is existing, and delete two error log to avoid printing
them all the time after this modification.
Fixes: 72110b567479 ("net: hns3: return 0 and print warning when hit duplicate MAC")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
HCLGE_FLAG_MQPRIO_ENABLE is supposed to set when enable
multiple TCs with tc mqprio, and HCLGE_FLAG_DCB_ENABLE is
supposed to set when enable multiple TCs with ets. But
the driver mixed the flags when updating the tm configuration.
Furtherly, PFC should be available when HCLGE_FLAG_MQPRIO_ENABLE
too, so remove the unnecessary limitation.
Fixes: 5a5c90917467 ("net: hns3: add support for tc mqprio offload")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For destroy mqprio is irreversible in stack, so it's unnecessary
to rollback the tc configuration when destroy mqprio failed.
Otherwise, it may cause the configuration being inconsistent
between driver and netstack.
As the failure is usually caused by reset, and the driver will
restore the configuration after reset, so it can keep the
configuration being consistent between driver and hardware.
Fixes: 5a5c90917467 ("net: hns3: add support for tc mqprio offload")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, in function hns3_nic_set_real_num_queue(), the
driver doesn't report the queue count and offset for disabled
tc. If user enables multiple TCs, but only maps user
priorities to partial of them, it may cause the queue range
of the unmapped TC being displayed abnormally.
Fix it by removing the tc enable checking, ensure the queue
count is not zero.
With this change, the tc_en is useless now, so remove it.
Fixes: a75a8efa00c5 ("net: hns3: Fix tc setup when netdev is first up")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
hns3_nic_net_open() is not allowed to called repeatly, but there
is no checking for this. When doing device reset and setup tc
concurrently, there is a small oppotunity to call hns3_nic_net_open
repeatedly, and cause kernel bug by calling napi_enable twice.
The calltrace information is like below:
[ 3078.222780] ------------[ cut here ]------------
[ 3078.230255] kernel BUG at net/core/dev.c:6991!
[ 3078.236224] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 3078.243431] Modules linked in: hns3 hclgevf hclge hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O)
[ 3078.258880] CPU: 0 PID: 295 Comm: kworker/u8:5 Tainted: G O 5.14.0-rc4+ #1
[ 3078.269102] Hardware name: , BIOS KpxxxFPGA 1P B600 V181 08/12/2021
[ 3078.276801] Workqueue: hclge hclge_service_task [hclge]
[ 3078.288774] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[ 3078.296168] pc : napi_enable+0x80/0x84
tc qdisc sho[w 3d0e7v8 .e3t0h218 79] lr : hns3_nic_net_open+0x138/0x510 [hns3]
[ 3078.314771] sp : ffff8000108abb20
[ 3078.319099] x29: ffff8000108abb20 x28: 0000000000000000 x27: ffff0820a8490300
[ 3078.329121] x26: 0000000000000001 x25: ffff08209cfc6200 x24: 0000000000000000
[ 3078.339044] x23: ffff0820a8490300 x22: ffff08209cd76000 x21: ffff0820abfe3880
[ 3078.349018] x20: 0000000000000000 x19: ffff08209cd76900 x18: 0000000000000000
[ 3078.358620] x17: 0000000000000000 x16: ffffc816e1727a50 x15: 0000ffff8f4ff930
[ 3078.368895] x14: 0000000000000000 x13: 0000000000000000 x12: 0000259e9dbeb6b4
[ 3078.377987] x11: 0096a8f7e764eb40 x10: 634615ad28d3eab5 x9 : ffffc816ad8885b8
[ 3078.387091] x8 : ffff08209cfc6fb8 x7 : ffff0820ac0da058 x6 : ffff0820a8490344
[ 3078.396356] x5 : 0000000000000140 x4 : 0000000000000003 x3 : ffff08209cd76938
[ 3078.405365] x2 : 0000000000000000 x1 : 0000000000000010 x0 : ffff0820abfe38a0
[ 3078.414657] Call trace:
[ 3078.418517] napi_enable+0x80/0x84
[ 3078.424626] hns3_reset_notify_up_enet+0x78/0xd0 [hns3]
[ 3078.433469] hns3_reset_notify+0x64/0x80 [hns3]
[ 3078.441430] hclge_notify_client+0x68/0xb0 [hclge]
[ 3078.450511] hclge_reset_rebuild+0x524/0x884 [hclge]
[ 3078.458879] hclge_reset_service_task+0x3c4/0x680 [hclge]
[ 3078.467470] hclge_service_task+0xb0/0xb54 [hclge]
[ 3078.475675] process_one_work+0x1dc/0x48c
[ 3078.481888] worker_thread+0x15c/0x464
[ 3078.487104] kthread+0x160/0x170
[ 3078.492479] ret_from_fork+0x10/0x18
[ 3078.498785] Code: c8027c81 35ffffa2 d50323bf d65f03c0 (d4210000)
[ 3078.506889] ---[ end trace 8ebe0340a1b0fb44 ]---
Once hns3_nic_net_open() is excute success, the flag
HNS3_NIC_STATE_DOWN will be cleared. So add checking for this
flag, directly return when HNS3_NIC_STATE_DOWN is no set.
Fixes: e888402789b9 ("net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
