summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-11-05mfd: altr_a10sr: Add SPI device ID tableMark Brown
Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding a SPI device ID table. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210924143347.14721-2-broonie@kernel.org
2021-11-05mfd: exynos-lpass: Describe driver in KConfigKrzysztof Kozlowski
Describe better which driver applies to which SoC, to make configuring kernel for Samsung SoC easier. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210924133332.112092-1-krzysztof.kozlowski@canonical.com
2021-11-05mfd: core: Add missing of_node_put for loop iterationKrzysztof Kozlowski
Early exits from for_each_child_of_node() should decrement the node reference counter. Reported by Coccinelle: drivers/mfd/mfd-core.c:197:2-24: WARNING: Function "for_each_child_of_node" should have of_node_put() before goto around lines 209. Fixes: c94bb233a9fe ("mfd: Make MFD core code Device Tree and IRQ domain aware") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210528115126.18370-1-krzysztof.kozlowski@canonical.com
2021-11-05mfd: intel-lpss: Add support for MacBookPro16,2 ICL-N UARTOrlando Chamberlain
Added 8086:38a8 to the intel_lpss_pci driver. It is an Intel Ice Lake PCH-N UART controler present on the MacBookPro16,2. Signed-off-by: Orlando Chamberlain <redecorating@protonmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211002111449.12674-1-redecorating@protonmail.com
2021-11-05mfd: max14577: Do not enforce (incorrect) interrupt trigger typeKrzysztof Kozlowski
Interrupt line can be configured on different hardware in different way, even inverted. Therefore driver should not enforce specific trigger type - edge falling - but instead rely on Devicetree to configure it. The Maxim 14577/77836 datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU therefore the edge falling is not correct. The interrupt line is shared between PMIC and charger driver, so using level sensitive interrupt is here especially important to avoid races. With an edge configuration in case if first PMIC signals interrupt followed shortly after by the RTC, the interrupt might not be yet cleared/acked thus the second one would not be noticed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210602110445.33536-4-krzysztof.kozlowski@canonical.com
2021-11-05mfd: max77693: Do not enforce (incorrect) interrupt trigger typeKrzysztof Kozlowski
Interrupt line can be configured on different hardware in different way, even inverted. Therefore driver should not enforce specific trigger type - edge falling - but instead rely on Devicetree to configure it. The Maxim 77693 datasheet describes the interrupt line as active low with a requirement of acknowledge from the CPU therefore the edge falling is not correct. The interrupt line is shared between PMIC and RTC driver, so using level sensitive interrupt is here especially important to avoid races. With an edge configuration in case if first PMIC signals interrupt followed shortly after by the RTC, the interrupt might not be yet cleared/acked thus the second one would not be noticed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210602110445.33536-3-krzysztof.kozlowski@canonical.com
2021-11-05mfd: max77686: Do not enforce (incorrect) interrupt trigger typeKrzysztof Kozlowski
Interrupt line can be configured on different hardware in different way, even inverted. Therefore driver should not enforce specific trigger type - edge falling - but instead rely on Devicetree to configure it. The Maxim 77686 datasheet describes the interrupt line as active low with a requirement of acknowledge from the CPU therefore the edge falling is not correct. The interrupt line is shared between PMIC and RTC driver, so using level sensitive interrupt is here especially important to avoid races. With an edge configuration in case if first PMIC signals interrupt followed shortly after by the RTC, the interrupt might not be yet cleared/acked thus the second one would not be noticed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210602110445.33536-2-krzysztof.kozlowski@canonical.com
2021-11-05mfd: sec-irq: Do not enforce (incorrect) interrupt trigger typeKrzysztof Kozlowski
Interrupt line can be configured on different hardware in different way, even inverted. Therefore driver should not enforce specific trigger type - edge falling - but instead rely on Devicetree to configure it. The Samsung PMIC drivers are used only on Devicetree boards. Additionally, the PMIC datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU therefore the edge falling is not correct. Marek Szyprowski reports that together with DTS change (proper level in DTS) it fixes RTC alarm failure that he observed from time to time on TM2e board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210602110445.33536-1-krzysztof.kozlowski@canonical.com
2021-11-05mfd: cros_ec: Drop unneeded MODULE_ALIASKrzysztof Kozlowski
The MODULE_DEVICE_TABLE already creates proper alias. Having another MODULE_ALIAS causes the alias to be duplicated: $ modinfo cros_ec_dev.ko alias: platform:cros-ec-dev srcversion: F84A69D2156719A4F717A76 alias: platform:cros-ec-dev Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-11-05mfd: Kconfig: Fix typo in PMIC_ADP5520 from AD5520 to ADP5520Ramona Alexandra Nechita
The description mentioned AD5520, which is a different device. Fixed the typo. Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-11-05mfd: sprd: Add support for SC2730 PMICChunyan Zhang
SC2730 is a PMIC SoC integrated in UMS512. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-11-05mfd: da9063: Add support for latest EA silicon revisionCarlos de Paula
This update adds new regmap to support the latest EA silicon which will be selected based on the chip and variant information read from the device. Signed-off-by: Carlos de Paula <me@carlosedp.com> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-11-05mfd: rk808: Add support for power off on RK817Ondrej Jirman
RK817 has a power-off bit in SYS_CFG3. Add support for powering off the PMIC. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-11-05mfd: intel_pmt: Only compile on x86Prarit Bhargava
The intel_pmt driver shows up as a compile option for all arches but is 32-bit and 64-bit x86 specific. Add a CONFIG dependency on X86 for intel_pmt. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-11-05mfd: ti_am335x_tscadc: Fix spelling mistake "atleast" -> "at least"Colin Ian King
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-11-05Merge branches 'ib-mfd-iio-touchscreen-clk-5.16', ↵Lee Jones
'ib-mfd-misc-regulator-5.16' and 'tb-mfd-from-regulator-5.16' into ibs-for-mfd-merged
2021-11-05net: marvell: prestera: fix patchwork build problemsVolodymyr Mytnyk
fix the remaining build issues reported by patchwork in firmware v4.0 support commit which has been already merged. Fix patchwork issues: - source inline - checkpatch Fixes: bb5dbf2cc64d ("net: marvell: prestera: add firmware v4.0 support") Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05amt: remove duplicate include in amt.cZhang Mingyu
'net/protocol.h' included in 'drivers/net/amt.c' is duplicated. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Zhang Mingyu <zhang.mingyu@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05octeontx2-nicvf: fix ioctl callbackArnd Bergmann
The mii ioctls are now handled by the ndo_eth_ioctl() callback, not the old ndo_do_ioctl(), but octeontx2-nicvf introduced the function for the old way. Move it over to ndo_eth_ioctl() to actually allow calling it from user space. Fixes: 43510ef4ddad ("octeontx2-nicvf: Add PTP hardware clock support to NIX VF") Fixes: a76053707dbf ("dev_ioctl: split out ndo_eth_ioctl") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05ax88796c: fix ioctl callbackArnd Bergmann
The timestamp ioctls are now handled by the ndo_eth_ioctl() callback, not the old ndo_do_ioctl(), but oax88796 introduced the function for the old way. Move it over to ndo_eth_ioctl() to actually allow calling it from user space. Fixes: a97c69ba4f30 ("net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver") Fixes: a76053707dbf ("dev_ioctl: split out ndo_eth_ioctl") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Lukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05Merge branch 'for-5.16/xiaomi' into for-linusJiri Kosina
- proper support of Xiaomi Mi buttons (Ilya Skriblovsky)
2021-11-05Merge branch 'for-5.16/wacom' into for-linusJiri Kosina
- improvement of device management handling (Cai Huoqing, Jason Gerecke)
2021-11-05Merge branch 'for-5.16/u2fzero' into for-linusJiri Kosina
- support for new revision of the NitroKey U2F device firmware (Andrej Shadura)
2021-11-05Merge branch 'for-5.16/nintendo' into for-linusJiri Kosina
- support for Nintendo Switch Pro Controllers and Joy-Cons (Daniel J. Ogorchock)
2021-11-05Merge branch 'for-5.16/playstation' into for-linusJiri Kosina
- LED handling improvements (Roderick Colenbrander)
2021-11-05Merge branch 'for-5.16/core' into for-linusJiri Kosina
- update to handle TransducerSerialNumber2 which has been recently added to the specification (Felipe Balbi)
2021-11-05Merge branch 'for-5.16/asus' into for-linusJiri Kosina
2021-11-05Merge branch 'for-5.16/apple' into for-linusJiri Kosina
- support for 2021 Magic Keyboard (Alex Henrie) - tidle key quirk handling improvement (Alex Henrie)
2021-11-05Merge branch 'for-5.16/amd-sfh' into for-linusJiri Kosina
- code cleanups (Basavaraj Natikar, Christophe JAILLET)
2021-11-05PCI: Add ACS quirk for Pericom PI7C9X2G switchesNathan Rossi
The Pericom PI7C9X2G404/PI7C9X2G304/PI7C9X2G303 PCIe switches have an erratum for ACS P2P Request Redirect behaviour when used in the cut-through forwarding mode. The recommended work around for this issue is to use the switch in store and forward mode. The erratum results in packets being queued and not being delivered upstream, which can be observed as very poor downstream device performance and/or dropped device-generated data/interrupts. Add a fixup so that when enabling or resuming the downstream port we check if it has enabled ACS P2P Request Redirect, and if so, change the device (via the upstream port) to use the store and forward operating mode. Link: https://bugzilla.kernel.org/show_bug.cgi?id=177471 Link: https://lore.kernel.org/r/20210910025823.196508-1-nathan@nathanrossi.com Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Nathan Rossi <nathan.rossi@digi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-11-05pwm: vt8500: Rename pwm_busy_wait() to make it obviously driver-specificUwe Kleine-König
The pwm_ prefix suggests that pwm_busy_wait() is a function provided by the pwm core. Use the otherwise consistently used driver prefix for this function, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-11-05pwm: pwm-samsung: Trigger manual update when disabling PWMMårten Lindahl
When duty-cycle is at full level (100%), the TCNTn and TCMPn registers needs to be flushed in order to disable the signal. The PWM manual does not say anything about this, but states that only clearing the TCON auto-reload bit should be needed, and this seems to be true when the PWM duty-cycle is not at full level. This can be observed on an Axis ARTPEC-8, by running: echo <period> > pwm/period echo <period> > pwm/duty_cycle echo 1 > pwm/enable echo 0 > pwm/enable Since the TCNTn and TCMPn registers are activated when enabling the PWM (setting TCON auto-reload bit), and are not touched when disabling the PWM, the double buffered auto-reload function seems to be still active. Lowering duty-cycle, and restoring it again in between the enabling and disabling, makes the disable work since it triggers a reload of the TCNTn and TCMPn registers. Fix this by securing a reload of the TCNTn and TCMPn registers when disabling the PWM and having a full duty-cycle. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-11-05pwm: visconti: Simplify using devm_pwmchip_add()zhaoxiao
This allows to drop the platform_driver's remove function. This is the only user of driver data so this can go away, too. Signed-off-by: zhaoxiao <long870912@gmail.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-11-05pwm: samsung: Describe driver in KconfigKrzysztof Kozlowski
Describe better which driver applies to which SoC, to make configuring kernel for Samsung SoC easier. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-11-05pwm: Make it explicit that pwm_apply_state() might sleepUwe Kleine-König
At least some implementations sleep. So mark pwm_apply_state() with a might_sleep() to make callers aware. In the worst case this uncovers a valid atomic user, then we revert this patch and at least gained some more knowledge and then can work on a concept similar to gpio_get_value/gpio_get_value_cansleep. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-11-05pwm: atmel: Drop unused headerUwe Kleine-König
Since commit 52eaba4cedbd ("pwm: atmel: Rework tracking updates pending in hardware") the driver doesn't make use of mutexes any more, so the header defining these doesn't need to be included. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-11-05amt: Fix NULL but dereferenced coccicheck errorYang Li
Eliminate the following coccicheck warning: ./drivers/net/amt.c:2795:6-9: ERROR: amt is NULL but dereferenced. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05net: ax88796c: hide ax88796c_dt_ids if !CONFIG_OFJakub Kicinski
Build bot says: >> drivers/net/ethernet/asix/ax88796c_main.c:1116:34: warning: unused variable 'ax88796c_dt_ids' [-Wunused-const-variable] static const struct of_device_id ax88796c_dt_ids[] = { ^ The only reference to this array is wrapped in of_match_ptr(). Reported-by: kernel test robot <lkp@intel.com> Fixes: a97c69ba4f30 ("net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05net: ethernet: litex: Remove unnecessary print function dev_err()Xu Wang
The print function dev_err() is redundant because platform_get_irq() already prints an error. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Reviewed-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05drm/udl: fix control-message timeoutJohan Hovold
USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 5320918b9a87 ("drm/udl: initial UDL driver (v4)") Cc: stable@vger.kernel.org # 3.4 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211025115353.5089-1-johan@kernel.org
2021-11-05octeontx2-pf: select CONFIG_NET_DEVLINKArnd Bergmann
The octeontx2 pf nic driver failsz to link when the devlink support is not reachable: aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_get': otx2_devlink.c:(.text+0x10): undefined reference to `devlink_priv' aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_validate': otx2_devlink.c:(.text+0x50): undefined reference to `devlink_priv' aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_set': otx2_devlink.c:(.text+0xd0): undefined reference to `devlink_priv' aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_devlink_info_get': otx2_devlink.c:(.text+0x150): undefined reference to `devlink_priv' This is already selected by the admin function driver, but not the actual nic, which might be built-in when the af driver is not. Fixes: 2da489432747 ("octeontx2-pf: devlink params support to set mcam entry count") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05sfc: use swap() to make code cleanerYang Guang
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid opencoding it. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Yang Guang <yang.guang5@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05octeontx2-af: use swap() to make code cleanerYang Guang
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid opencoding it. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Yang Guang <yang.guang5@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05tg3: Remove redundant assignmentsluo penghao
The assignment of err will be overwritten next, so this statement should be deleted. The clang_analyzer complains as follows: drivers/net/ethernet/broadcom/tg3.c:5506:2: warning: Value stored to 'expected_sg_dig_ctrl' is never read Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: luo penghao <luo.penghao@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05bonding: Fix a use-after-free problem when bond_sysfs_slave_add() failedHuang Guobin
When I do fuzz test for bonding device interface, I got the following use-after-free Calltrace: ================================================================== BUG: KASAN: use-after-free in bond_enslave+0x1521/0x24f0 Read of size 8 at addr ffff88825bc11c00 by task ifenslave/7365 CPU: 5 PID: 7365 Comm: ifenslave Tainted: G E 5.15.0-rc1+ #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 Call Trace: dump_stack_lvl+0x6c/0x8b print_address_description.constprop.0+0x48/0x70 kasan_report.cold+0x82/0xdb __asan_load8+0x69/0x90 bond_enslave+0x1521/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f19159cf577 Code: b3 66 90 48 8b 05 11 89 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 78 RSP: 002b:00007ffeb3083c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffeb3084bca RCX: 00007f19159cf577 RDX: 00007ffeb3083ce0 RSI: 0000000000008990 RDI: 0000000000000003 RBP: 00007ffeb3084bc4 R08: 0000000000000040 R09: 0000000000000000 R10: 00007ffeb3084bc0 R11: 0000000000000246 R12: 00007ffeb3083ce0 R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffeb3083cb0 Allocated by task 7365: kasan_save_stack+0x23/0x50 __kasan_kmalloc+0x83/0xa0 kmem_cache_alloc_trace+0x22e/0x470 bond_enslave+0x2e1/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 7365: kasan_save_stack+0x23/0x50 kasan_set_track+0x20/0x30 kasan_set_free_info+0x24/0x40 __kasan_slab_free+0xf2/0x130 kfree+0xd1/0x5c0 slave_kobj_release+0x61/0x90 kobject_put+0x102/0x180 bond_sysfs_slave_add+0x7a/0xa0 bond_enslave+0x11b6/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Last potentially related work creation: kasan_save_stack+0x23/0x50 kasan_record_aux_stack+0xb7/0xd0 insert_work+0x43/0x190 __queue_work+0x2e3/0x970 delayed_work_timer_fn+0x3e/0x50 call_timer_fn+0x148/0x470 run_timer_softirq+0x8a8/0xc50 __do_softirq+0x107/0x55f Second to last potentially related work creation: kasan_save_stack+0x23/0x50 kasan_record_aux_stack+0xb7/0xd0 insert_work+0x43/0x190 __queue_work+0x2e3/0x970 __queue_delayed_work+0x130/0x180 queue_delayed_work_on+0xa7/0xb0 bond_enslave+0xe25/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88825bc11c00 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes inside of 1024-byte region [ffff88825bc11c00, ffff88825bc12000) The buggy address belongs to the page: page:ffffea00096f0400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x25bc10 head:ffffea00096f0400 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x57ff00000010200(slab|head|node=1|zone=2|lastcpupid=0x7ff) raw: 057ff00000010200 ffffea0009a71c08 ffff888240001968 ffff88810004dbc0 raw: 0000000000000000 00000000000a000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88825bc11b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88825bc11b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88825bc11c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88825bc11c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88825bc11d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Put new_slave in bond_sysfs_slave_add() will cause use-after-free problems when new_slave is accessed in the subsequent error handling process. Since new_slave will be put in the subsequent error handling process, remove the unnecessary put to fix it. In addition, when sysfs_create_file() fails, if some files have been crea- ted successfully, we need to call sysfs_remove_file() to remove them. Since there are sysfs_create_files() & sysfs_remove_files() can be used, use these two functions instead. Fixes: 7afcaec49696 (bonding: use kobject_put instead of _del after kobject_add) Signed-off-by: Huang Guobin <huangguobin4@huawei.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05drm/ttm: remove ttm_bo_vm_insert_huge()Jason Gunthorpe
The huge page functionality in TTM does not work safely because PUD and PMD entries do not have a special bit. get_user_pages_fast() considers any page that passed pmd_huge() as usable: if (unlikely(pmd_trans_huge(pmd) || pmd_huge(pmd) || pmd_devmap(pmd))) { And vmf_insert_pfn_pmd_prot() unconditionally sets entry = pmd_mkhuge(pfn_t_pmd(pfn, prot)); eg on x86 the page will be _PAGE_PRESENT | PAGE_PSE. As such gup_huge_pmd() will try to deref a struct page: head = try_grab_compound_head(pmd_page(orig), refs, flags); and thus crash. Thomas further notices that the drivers are not expecting the struct page to be used by anything - in particular the refcount incr above will cause them to malfunction. Thus everything about this is not able to fully work correctly considering GUP_fast. Delete it entirely. It can return someday along with a proper PMD/PUD_SPECIAL bit in the page table itself to gate GUP_fast. Fixes: 314b6580adc5 ("drm/ttm, drm/vmwgfx: Support huge TTM pagefaults") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Thomas Hellström <thomas.helllstrom@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> [danvet: Update subject per Thomas' &Christian's review] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/0-v2-a44694790652+4ac-ttm_pmd_jgg@nvidia.com
2021-11-05Revert "usb: core: hcd: Add support for deferring roothub registration"Greg Kroah-Hartman
This reverts commit 58877b0824da15698bd85a0a9dbfa8c354e6ecb7. It has been reported to be causing problems in Arch and Fedora bug reports. Reported-by: Hans de Goede <hdegoede@redhat.com> Link: https://bbs.archlinux.org/viewtopic.php?pid=2000956#p2000956 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019542 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019576 Link: https://lore.kernel.org/r/42bcbea6-5eb8-16c7-336a-2cb72e71bc36@redhat.com Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Chris Chiu <chris.chiu@canonical.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-05Revert "xhci: Set HCD flag to defer primary roothub registration"Greg Kroah-Hartman
This reverts commit b7a0a792f864583207c593b50fd1b752ed89f4c1. It has been reported to be causing problems in Arch and Fedora bug reports. Reported-by: Hans de Goede <hdegoede@redhat.com> Link: https://bbs.archlinux.org/viewtopic.php?pid=2000956#p2000956 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019542 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019576 Link: https://lore.kernel.org/r/42bcbea6-5eb8-16c7-336a-2cb72e71bc36@redhat.com Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Chris Chiu <chris.chiu@canonical.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-05Merge tag 'amd-drm-fixes-5.16-2021-11-03' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-fixes-5.16-2021-11-03: amdgpu: - GPU reset fix - Aldebaran fix - Yellow Carp fixes - DCN2.1 DMCUB fix - IOMMU regression fix for Picasso - DSC display fixes - BPC display calculation fixes - Other misc display fixes amdkfd: - SVM fixes - Fix gfx version for renoir Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211104024447.4535-1-alexander.deucher@amd.com
2021-11-05Merge tag 'drm-misc-next-2021-10-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.16: UAPI Changes: Cross-subsystem Changes: Core Changes: - fbdev: Fix double-free, Remove unused scrolling acceleration - locking: improve logging for contented locks without backoff - dma-buf: Add dma_resv_for_each_fence iterator, and conversion of users Driver Changes: - nouveau: Various code style improvements - bridge: HPD improvements for lt9611uxc, eDP aux-bus support for ps8640, lvds-codec data-mapping selection support - panels: Vivax TPC-9150, Innolux G070Y2-T02, LOGIC Technologies LTTD800480070-L2RT, Sharp LS060T1SX01, Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211014120452.2wicnt6hobu3kbwb@gilmour
generated by cgit (git 2.34.1) at 2025-09-15 13:47:50 +0000